Related
Has anyone found any decent cases or sleeves for this tablet yet?
It's dimensions are listed as 271x176x12.9mm, which makes it longer than the iPad, as well as longer and wider than the Xoom, so I imagine most cases for those devices will be too small (or it'll protrude through the opening.)
At the same time, lots of netbook cases are around, but they seem to extend by 1 or 2cm too far in each dimension. Closest appears to be the Belkin 10.2" cases on Amazon.
There's a comparison of sizes here:
http://www.sizeasy.com/page/size_co...om-vs-Samsung-Galaxy-Tab-10-1v-vs-Apple-iPad2
http://www.proporta.com/F02/PPF02P05.php?t_id=5653&t_mode=des
Looks like it might work - size wise it seems the transformer will fit.
For the moment I am going to keep my transformer in the case I used for my Asus EEE PC Netbook, just hope it fits!!!
I also contacted tuff luv as I adore their cases and have one for my Kindle and love the fact I can prop it up and read it. They say there going to look into it and to contact them again in a couple of weeks, I really hope they do a case.
I got on of these as a temporary measure. .
http://www.amazon.co.uk/AmazonBasic...1_6?s=computers&ie=UTF8&qid=1302631132&sr=1-6
Fits well enough, of somewhat unspectacular..
REALLY hoping Yoobao do a transformer version of their magic case.. have emailed them to enquire.. mebbe i enough of us register our interest.. Hint.. hint
I still haven't found a case :'( I'm using a net book neoprene case which is too big, do we need to consider the keyboard as well... might make it harder to get the case.
Sent from my Transformer TF101 using Tapatalk
Ive got one of these and it fits pretty well.
http://www.argos.co.uk/static/Product/partNumber/9295706.htm
I got one of these anticipating my Transformer but after getting it, I'm pretty sure it will be about .5 inch short.
www .amazon.com/AmazonBasics-Netbook-Handle-10-Inch-Netbooks/dp/B002VPE1Q6/ref=sr_1_1?ie=UTF8&qid=1302649243&sr=8-1
The Transformer is long and narrow unlike all other tablets.
I got my kindle sleeve from here..http://wrappers.typepad.com/
Very pleased with it...
If you email them with details they will advise which of their huge range will fit the Xformer. They are custom made.
I bought a cheap neoprene sleeve on ebay (item no 170625464579) for £3.30 delivered (although he has now hiked up his price to £4.95). It fits pretty much perfectly - although I did manage to accidentally wake the tablet up from standby putting it in the sleeve on one occasion.
andyfoster said:
I bought a cheap neoprene sleeve on ebay (item no 170625464579) for £3.30 delivered (although he has now hiked up his price to £4.95). It fits pretty much perfectly - although I did manage to accidentally wake the tablet up from standby putting it in the sleeve on one occasion.
Click to expand...
Click to collapse
Looks like this one on Amazon?
http://www.amazon.co.uk/A1CS-tablet...66/ref=sr_1_24?ie=UTF8&qid=1302711288&sr=8-24
Edit: blah, ignore - just noticed that's for 7" tablets.
steftymo said:
I got my kindle sleeve from here..http://wrappers.typepad.com/
Very pleased with it...
If you email them with details they will advise which of their huge range will fit the Xformer. They are custom made.
Click to expand...
Click to collapse
Wow, those look really nice. I'll email and see what they say.
Edit: Have just been emailing with the lady that makes them. She's confident she can make something up for it and is going to send me a sample. I'll keep you posted!
case
I just bit the bullet and ordered this one for now:
www.amazon.co.uk/exec/obidos/ASIN/B0045D88I4/ref=ox_ya_os_product
Size is 270x200x25 mm which is the closest I could get to the Transformer size. It should arrive in a couple of days and then I will report back.
rio
This looks like a perfect fit from the listed dimensions:
http://www.gearzap.com/pakuma-eco2bag-cocoon-10-netbook-sleeve-black-and-jasper-red.html
Anyone know the height of the keyboard? Don't want to buy a sleeve yet until I know both the tablet & keyboard are going to fit in it!
can we use the cases/sleeves for asus eee netbook? they are the same size of 10.1"..
leeharo said:
can we use the cases/sleeves for asus eee netbook? they are the same size of 10.1"..
Click to expand...
Click to collapse
maybe im not sure. but isnt the transformer 16:10? its pretty widescreen so itll be a little lengthy compared to netbooks i think. im not quite sure.
Today i went to my local PCWorld store and picked up a Samsonite 11" Notebook Case, it seems to fit quite well, but was £24.99 ....
http://www.pcworld.co.uk/gbuk/samsonite-aramon2-11-laptop-case-black-05318913-pdt.html
It is duel aspect, so when the keyboard part of the TF arrives it will also be used in this case, the tablet part fits in the top part of the case and is held in place by two corner holders.
bobcatuk said:
Today i went to my local PCWorld store and picked up a Samsonite 11" Notebook Case, it seems to fit quite well, but was £24.99 ....
http://www.pcworld.co.uk/gbuk/samsonite-aramon2-11-laptop-case-black-05318913-pdt.html
It is duel aspect, so when the keyboard part of the TF arrives it will also be used in this case, the tablet part fits in the top part of the case and is held in place by two corner holders.
Click to expand...
Click to collapse
Been there, done that. Unfortunately - as you'll soon notice - when it's done up the zip sits right on top of the power button, making it incredibly easy to turn on accidentally. I'm taking mine back tonight.
My sample "Wrapper", as linked above, arrived this morning and it's very nice indeed! Perhaps a little small width ways but I've sent my feedback and I think they're going to re-work it a little. Once they've got the final design down-tap I'd recommend them without hesitation.
Noiz said:
Been there, done that. Unfortunately - as you'll soon notice - when it's done up the zip sits right on top of the power button, making it incredibly easy to turn on accidentally. I'm taking mine back tonight.
Click to expand...
Click to collapse
I guess i can see what you mean about the zip, but im traveling around with work next week and wanted something quick to stop it getting battered in my laptop bag with everything else that is in there.
It will do for the moment until either an official case comes out or a good alternative is found, I will hold onto the receipt and packaging that came with it, if it turns on the power constantly when im away next week i will take it back.
The TeckNet iPad Leather Case for Apple iPad is exactly the type of thing I want, only designed for the eeePad!!!
I'd link you to the page on Amazon, but I've not posted enough on here yet to put up external links! (GRRR!)
I just got a transformer last week and I really don't like any of the folio cases available but want to have some kind of protection for when I throw it in my bag. So I was looking into sleeve cases on amazon but reading the reviews people were saying they didn't fit too well, having 1-2" of space so it moves around a lot. Are there any sleeves out there that are specifically made for the transformer or at least fit it decently?
Hmm, maybe I'm cheap but for that, I'd probably just pad it with a towel or a custom cut piece of foam.
Sent from my Transformer TF101 using Tapatalk
I have this one. Fit the TF perfectly + some pockets for accessories.
http://www.shopping.hp.com/webapp/s...aoid=20715&ci_src=14110944&ci_sku=QB459AA#ABL
the asus transformer is 27.1cm by 17.7cm I believe and surprisingly when I was looking for cheaper opinions on ebay it was the cheap as chips option that seemed to be sized as best 'fitted' for the asus's dimensions (in my opinion at least)
http://www.ebay.co.uk/itm/150672438...X:IT&_trksid=p3984.m1438.l2649#ht_3393wt_1085
I suppose if it works for what a person needs it for don't knock the 'cheap as chips' ness factor of it!
apple85 said:
the asus transformer is 27.1cm by 17.7cm I believe and surprisingly when I was looking for cheaper opinions on ebay it was the cheap as chips option that seemed to be sized as best 'fitted' for the asus's dimensions (in my opinion at least)
http://www.ebay.co.uk/itm/150672438...X:IT&_trksid=p3984.m1438.l2649#ht_3393wt_1085
I suppose if it works for what a person needs it for don't knock the 'cheap as chips' ness factor of it!
Click to expand...
Click to collapse
That's exactly what I was looking for, you have that case then?
I bought this one. Fits perfectly. Adds a zipper side pocket for the charger. Handles have velcro to keep the together. Has 2 plastic pouches inside made for SD cards. The handles come in handy if carrying other things.
http://www.ebay.com/itm/Black-Neopr...ltDomain_0&hash=item4cfbac6575#ht_1902wt_1189
Plus it is super cheap. The quality is about 8/10 as the zippers are just a little tough. For the price it can't be beat.
@ FlyingToilets - yes, I've just bought that one as extra extra protection - you can't really going too wrong with something that costs 2 quid
I've also bought this one as a main case (http://www.yourpoetic.com/android-t.../black-slimbook-asus-eee-cases-and-covers.asp) for about £13 at amazon as the main case (the other case I plan to house the asus+portfolio case and a stylus)
I really wanted to get this one (http://www.yourpoetic.com/android-t...ducts/black-red-asus-eee-cases-and-covers.asp) but it is a bit too much in the uk currently
I've only just ordered these so I don't know how good they will be but I'll try and let you know when they arrive!
I got this one for my Transformer and I love it!
Blurex (cant post links yet), just google blurex asus transformer case
Its slim, fits nicely, and feels great. It also lets me easily attach the keyboard while its open, but its not quite large enough to close around while the keyboard is attached and closed, which I don't really mind.
I just picked up a Transformer on Friday night, so just wanted something cheap for the time being to carry it in. There was a sleeve in the Best Buy ad today so I decided to pick one up. I'm very happy with it for $6.
I can't post links yet, but either look at the BB ad or search their website for "HP sleeve" and you'll find it.
I bought that el-cheapo ebay case.
1) Fit - it fits the transformer very well indeed. The long dimension is just right, absolutely would not want to be any less as it's a bit tight to flip the lid on. The short dimension is just fractionally more than would be a really tight fit, but it's so close that you really could regard it as made for the transformer (tab only, I doubt it would fit with the dock).
2) Finish - not so great. Seriously, what do you expect for the price? Within about 3 days some stitching gave way on the red piping , leaving it coming loose from the neoprene. I have repaired it by hand as at the price it really is not worth arguing it out with the seller.
3) Both of the above combine to mean that you need to be careful putting the case on and taking it off your tablet, as it's easy to pull the lid too hard and potentially break some stitching as you stretch the lid over the end of the tablet.
Overall... I am looking for a messenger bag style case for my transformer (and not liking anything I've seen except a couple of crumplers that, as much as I love their products, I am not prepared to pay for. In the meantime, this sleeve provides excellent value for my tablet around the living room and in my laptop bag.
http://www.amazon.com/gp/product/B00565T3ZW/ref=oh_o00_s00_i00_details
I am got this one here and I have been very happy with it. It fits perfectly and allows me to stand it up at an angle.
http://www.amazon.co.uk/dp/B005HI4FPG
does anyone have this case? from what I can tell, the tab goes one side, the keyboard dock the other and it's a hard shell carry case.
however, nowhere to put your cables.
does anyone know of a similar case to this but with an pouch as well for cables? I know it's a TF101 case, b ut considering the prime is a small item it will fit this case easy.
I am looking at this case as well as I read about the reviews on the office transleeve having all the problems with the tablet and the lack of availability online. From the pictures on amazon it seems that its quite thin to carry around. I read a review somewhere maybe from it official website saying that this can carry a dock with the transformer so i assume this is okay.
i have this case! it fits very well and you dont even have to take the prime out of the dock. also, it is a hard case, so it protects much better against falls etc.
on amazon germany it was available immediately
js931 said:
i have this case! it fits very well and you dont even have to take the prime out of the dock. also, it is a hard case, so it protects much better against falls etc.
on amazon germany it was available immediately
Click to expand...
Click to collapse
Thanks for the info! just a quick question, since the tablet is very thin and so once you put the prime into the case does it get really fat or huge to hold with one hand?
air-wave said:
Thanks for the info! just a quick question, since the tablet is very thin and so once you put the prime into the case does it get really fat or huge to hold with one hand?
Click to expand...
Click to collapse
of course its thicker, its not a neoprene sleeve. but thats why it protects well and you can still easily carry it with one hand! i really like it. didnt expect much for the price and was pleasantly surprised!
i also ordered a 10'' netbook case from case logic to compare, but the prime has too much room in it and its more of a thin neoprene, so its just scratch-protection...
I bought this hard case:
eBay - The UK's Online Marketplace
Internal dimensions now that I have it in my hand are:
Case: 26.8cm x 19.1cm x 3-4cm
Prime: 26.3cm x 18.1cm x 2cm
As you can see, it's a pretty close fit in theory. Have to wait 5 days before I get my Prime to confirm it's a good fit.
Alternatives to consider
Hey guys,
just like everyone else, looking for a proper case for my prime
since eventually (in the near future) I plan on getting the Dock, i'm looking for a case/sleeve
- looked at all the cased and couldn't find one I liked
- Finally found a case, but haven't had a chance to try it yet
it's the HP VX403AA / VX404AA it's a mini neoprene sleeve for the HP Mini netbook
- price is 32$ as low as I could find it. pricey but nice
- Has 2 smaller pockets on one side and a big one on the other side
- Plenty of storage to keep the charging cable/charger/micro USB with the tablet wherever you go.
- I'll let you know how it fits as soon as I try it, you can find it in local BestBuy's so if any1 is interested in trying it out before I get to it, by all means post your results.
Thank you,
Rodi
lancer3397 said:
however, nowhere to put your cables.
Click to expand...
Click to collapse
It looks like there is a pocket on the inside of the cover.
I ordered this iGadgitz case. Hope to get it next week. I will post some pictures when I have it.
I have recently purchased the envelope neoprene case by built. They sell several different versions but I bought the 9-10" net book version and the transformer prime with dock attached fits like they were made for each other. It also has a front pocket for your charge cables and charger.
Sent from my DROID RAZR using Forum Runner
UrbanDroid said:
I have recently purchased the envelope neoprene case by built. They sell several different versions but I bought the 9-10" net book version and the transformer prime with dock attached fits like they were made for each other. It also has a front pocket for your charge cables and charger.
Sent from my DROID RAZR using Forum Runner
Click to expand...
Click to collapse
Could you post a link?
This is a great case, my prime and dock lives in it when I'm not using it. It fits snug and feels well protected. There is a mesh Pocket inside which I justuse to keep the screen cloth, but you could easily fit a USB cable in.
Sent from my Transformer Prime TF201 using Tapatalk
I recently purchased a Asus EEE Pad and a waiting for it to be delivered.
I want to try and purchase accessories for it before it comes so I can use it sooner.
The Asus eee pad will be used at home but also when travelling (within the UK) when I go to visit family. I will probably need a screen protector and a case for it, but I'm not sure how many screen protectors I should order at first and how long they will last.
I have also ordered the tablet for a member of my family who will use it mostly at home. Should I get a case and screen protector for this as well?
What other accessories will I need or are useful?
I have checked eBay for screen protectors but there aren't any reviews to go with them and the ones on Amazon UK are expensive. Please provide links of what you've found best for your tablet.
Zagg's Invisishield or Invisible Shield is hands-down the best screen protector made, in my opinion. The bad is that it's an absolute bear to install.
In the US, most BestBuy locations still have them in stock for the TF101, *and* they'll install it for free (HIGHLY recommended!) . Check with your UK equivalent.
Sent from my Transformer TF101 using XDA
I use mine without a screen protector. The screen seems solid enough that I'm not nervous that anything will happen to it (at least nothing a screen protector will save).
I have this case: http://www.amazon.co.uk/gp/product/B006X0ZYQ6 and an invisible shield which I am happy with.
although if i was looking for a new screen protector I would see if I could find a finger print resistant one as everything I own gets covered in greace marks and it winds me up abit.
edit: here are some pictures of the case with and without the dock, the main reason I chose the case was because it would hold the tablet with and without the dock. the quality of the pics aren't that great
Without Dock:
http://dl.dropbox.com/u/4137122/TF101Case/20120410_000607.jpg
http://dl.dropbox.com/u/4137122/TF101Case/20120410_000635.jpg
http://dl.dropbox.com/u/4137122/TF101Case/20120410_002926.jpg
http://dl.dropbox.com/u/4137122/TF101Case/20120410_002931.jpg
With Dock.
http://dl.dropbox.com/u/4137122/TF101Case/20120410_000900.jpg
http://dl.dropbox.com/u/4137122/TF101Case/20120410_000910.jpg
http://dl.dropbox.com/u/4137122/TF101Case/20120410_000921.jpg
Thank you for the pics.
I wonder if anyone here has one sub-£20. The case looks great but I'm trying to find something a little cheaper as I need to buy 2.
Hey guys,
If anybody is looking for cases, I'm using this one.
http://www.amazon.com/MoKo-Folding-...1SCQ/ref=sr_1_2?ie=UTF8&qid=1337432342&sr=8-2
I like it a lot. It's very sturdy, strong build and the price is not bad at all. i would recommend it. Reviews are pretty good on it as well.. I'm not a big fan of folding cases but this one changed my mind. It's not those flimsy cheap ones they sell on ebay for $5. I had one of those for my tab 7.0 plus and it was garbage.
Ordered this same case over the weekend and am awaiting delivery. I do have the keyboard dock but see this as an excellent alternative for some situations. It's called a Transformer for a reason after all.
Sent from my Galaxy Nexus using Tapatalk 2
I concur, its a good case and since I couldn't find it in the Netherlands, I also ordered it through Amazon.
+ Very affordable
+ Sturdy
+ Proper screen protection
+ Fast delivery
+ Simple, yet stylish finish (leather-look, black)
But....
- I had to "adjust" the hole for the headphone. Originally it was placed 7 mm too low (when holding the tablet upright). But with a sharp knife, that is easily done.
- The cover is (when folded) hold in place by a small flap. I find that the friction is too low to properly keep the cover in place. So I improved it with some velcro. Now the cover stays were it is no matter how mucht I move the case around. Just make sure you place the soft side of the velcro on the cover (doesn't scratch the screen)
- It adds about half of the tablet in weight, which is no problem when its standing/laying on a surface of course. But just to let you know
-The 40 pin connector is at all times unprotected
- I am also thinkin of clearing some of the material around the on/off switch. I find it a bit too hard to reach (I am a lazy SoB, mind you )
- I will add a small loop for a stylus (not present)
I admit I am still waiting for the smart cover version like the one for the TF201. But until that moment, this one is it.
Cheers
I purchased this case and received it today. I really like it and it was a great deal. It's probably tthe best one for the money right now. Very well-made and fits perfectly. I especially like now the screen cover adjusts depending on the way you want to use the wedge stand and the magnets in said cover to keep it closed.
All-in-all, I highly recommend it to anybody who is looking for a case and is not going to be using the keyboard dock.
WOEHAA said:
I concur, its a good case and since I couldn't find it in the Netherlands, I also ordered it through Amazon.
Click to expand...
Click to collapse
I am also in the Netherlands and am trying to order it from Amazon, yet the buyer says they do not ship to the Netherlands?
I am using this link: http://www.amazon.co.uk/gp/product/B007P657RI/ref=ox_sc_act_title_1?ie=UTF8&m=A2W9JVEMMG88KL
I was wondering if you could post the link you used?
Thanks.
jpc0480 said:
I am also in the Netherlands and am trying to order it from Amazon, yet the buyer says they do not ship to the Netherlands?
I am using this link: http://www.amazon.co.uk/gp/product/B007P657RI/ref=ox_sc_act_title_1?ie=UTF8&m=A2W9JVEMMG88KL
I was wondering if you could post the link you used?
Thanks.
Click to expand...
Click to collapse
Try this one, branded differently but looks to be exactly the same thing. It came in the mail today
http://www.amazon.de/gp/product/B007ZOABJO/ref=oh_details_o00_s00_i00
smallblock said:
Try this one, branded differently but looks to be exactly the same thing. It came in the mail today
http://www.amazon.de/gp/product/B007ZOABJO/ref=oh_details_o00_s00_i00
Click to expand...
Click to collapse
Thanks for the link!
How do you like it?
***EDIT
I went ahead and purchased it anyway! Will be here on Monday!
I think it's great !!
i have it sitting on my desk at home, now i'm just waiting on the TF300 couple of questions:
1. assume the case closed leaves the inside of the case touching the screen. any damage possible here? it looks like pretty soft suede or microfiber, but still wondering.
2. what's the deal with carving out the headphone jack? has anyone else had to do this?
3. do you have pictures of the velcro thing? anyone else had problems closing it?
smallblock said:
I think it's great !!
Click to expand...
Click to collapse
Yeah just got mine today! Fits nicely!
Didn't have to mod mine either!
Sent from my ASUS Transformer Pad TF300T using XDA
Is the extra cost of the Caseen skinny cases worth it over the moko?
tuffluck said:
i have it sitting on my desk at home, now i'm just waiting on the TF300 couple of questions:
1. assume the case closed leaves the inside of the case touching the screen. any damage possible here? it looks like pretty soft suede or microfiber, but still wondering.
2. what's the deal with carving out the headphone jack? has anyone else had to do this?
3. do you have pictures of the velcro thing? anyone else had problems closing it?
Click to expand...
Click to collapse
If you are talking about the Moko one?
1. No, No damage possible. I had it for a month or so and havent seen damage on screen. I wonder this to, but it doesnt touch the screen. Atleat for me it doesn't.
2. I didn't have to. I used the headphones with no problem. No carving..
3. I can send a picture of the velcro but it's pretty strong. The tablet doesn't move down or tries to walk away from the case.
Mine is supposed to arrive tomorrow (Friday). Can't believe the overwhelming positive feedback from so many other users who have this case.
I've ordered mine by UK
"MoKo(TM) Folding Cover Case with Stand for Asus Eee Pad Transformer 10.1-Inch Android Tablet (TF300 Sleeve), Black"
Items: GBP 11.99
Postage & Packing: GBP 5.15
------
Order Total: GBP 17.14
Payment Total: EUR 22,03**
Delivery estimate: 15 Jun 2012 - 16 Jun 2012
Click to expand...
Click to collapse
It's a delivery estimate, but generally the dispatches from UK are very quick.
I have the moko case for the tablet and its great. The reason the screen doesn't get scratched is because of 2 magnets that are sitting on each corner on the far end of the case and when the case is closed there is still about a centimeter or 2 of clearance. Great case imo
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Hi,
is it easy to take out? I use the dock very often and I'm just looking for a case for surfing the internet or watching films, so I don't have to hold the tablet all the time. But cases like the slim one make it very hard / annoying to take the tablet out.
Does the magnets affect the tablet?
One of the reviews on Amazon for this case said that the magnets have some affect on the GPS. I am generally reluctant to bring electronics close to magnets. Does anyone see any issues with the magnets and GPS?
Drop-EX said:
Hi,
is it easy to take out? I use the dock very often and I'm just looking for a case for surfing the internet or watching films, so I don't have to hold the tablet all the time. But cases like the slim one make it very hard / annoying to take the tablet out.
Click to expand...
Click to collapse
No it's not. I take it out all the time. I personally don't like cases, but I had one because of my daughter.
rnagam1 said:
One of the reviews on Amazon for this case said that the magnets have some affect on the GPS. I am generally reluctant to bring electronics close to magnets. Does anyone see any issues with the magnets and GPS?
Click to expand...
Click to collapse
I saw that. I'll give it a try today. I don't use my tablet for gps so that doesnt bothered me.
MoKo(TM) 360 Degree Rotating Detachable Cover Case for Asus Transformer Pad TF300, BL
I got this one the other day and am really liking it so far. If you are looking for a case that lets you stand the pad up in portrait and landscape this is a great buy!
MoKo(TM) 360 Degree Rotating Detachable Cover Case for Asus Transformer Pad TF300, BLACK (with Vertical and Horizontal Stand, Elastic Hand Strap, and Stylus Loop)
http://www.amazon.com/MoKo-Rotating...9?s=electronics&ie=UTF8&qid=1339688594&sr=1-9