Related
I partitioned my SD card using ROM Manager, turned the phone off and got a black screen with lit keys. So, I read around and was told to use ODIN to reflash the stock TMO build, so I did. Now, Im getting the TMO logo and Galaxy S screen, but I get a black screen still.
I cannot get into download mode. I vol - and power and I get the Vibrant logo, then it goes back off. Even when plugged it, I get the batt charging animation, then back to the Vibrant screen.
I tried to push the update.zip to the SD card through ADB, but I get a permission denied message, meaning the root was killed.
So, is this phone pretty much screwed? I cant think of any other way to get it going outside of moving the update.zip to the sd card by a 3rd party measure i.e card reader/another phone
dude that's not even close to a brick as the phone is still responsive somehow..
do this:
1. pull out battery wait 5-10secs
2. connect USB to computer and phone
3. hold down the vol +/- buttons
4. plug in battery
5. you should be in download mode now
6. do what you gotta do with ODIN
good luck
Dont use that method to get to DL mode . Do it this way . First turn off your phone , then plug the usb cable into your computer ONLY . Next hold both volume buttons and plug the micro usb into your phone . Also use odin v1.3 and flash the rom of your preference .
Edit : xtone beat me to the punch
trill12 said:
I partitioned my SD card using ROM Manager, turned the phone off and got a black screen with lit keys. So, I read around and was told to use ODIN to reflash the stock TMO build, so I did. Now, Im getting the TMO logo and Galaxy S screen, but I get a black screen still.
I cannot get into download mode. I vol - and power and I get the Vibrant logo, then it goes back off. Even when plugged it, I get the batt charging animation, then back to the Vibrant screen.
I tried to push the update.zip to the SD card through ADB, but I get a permission denied message, meaning the root was killed.
So, is this phone pretty much screwed? I cant think of any other way to get it going outside of moving the update.zip to the sd card by a 3rd party measure i.e card reader/another phone
Click to expand...
Click to collapse
Yes using ROM Manager to repartition your phone will create the "soft-brick" you are experiencing. But as one person has already noted, this can pretty much be recovered using ODIN.
Definitely follow the advice given in Posts 2 and 3 of this thread to get into Download mode. If you're not getting the desired results using ODIN, what settings are you using? For example, what are the names of the .pit and .tar files you are using? Did you check or leave unchecked the "re-partition" option?
Sorry for the noobery. Im usually good at this.
Well, I was able to get into download mode and get ODIN to run, but im getting a MBD checksum error when I boot into recovery.
And I cannot install CWM through the market because my Application Storage is at 0.00B for some reason.
trill12 said:
Sorry for the noobery. Im usually good at this.
Well, I was able to get into download mode and get ODIN to run, but im getting a MBD checksum error when I boot into recovery.
And I cannot install CWM through the market because my Application Storage is at 0.00B for some reason.
Click to expand...
Click to collapse
What ROM did you flash. You might want to perform a factory reset and then flash the stock JFD ROM and see if that fixes your problem.
Good luck.
Oh this is a nightmare.... exactly what happened to me.
I'll be honest, I tried and tried and tried all sorts of stuff and somehow I got it back reading again.
I would ODIN to Eugenes Froyo that doesn't brick and see where that gets you. Thread is in developers section and I am pretty sure that's what got me back working but follow ALL the instructions. With no application room I couldn't push, unistall, install ect...
blizzard1017 said:
Oh this is a nightmare.... exactly what happened to me.
I'll be honest, I tried and tried and tried all sorts of stuff and somehow I got it back reading again.
I would ODIN to Eugenes Froyo that doesn't brick and see where that gets you. Thread is in developers section and I am pretty sure that's what got me back working but follow ALL the instructions. With no application room I couldn't push, unistall, install ect...
Click to expand...
Click to collapse
That's only needed if he flashed a rom with the wrong kernel or if he flashed a rom without disabling voodoo .
Sent from my SGH-T959 using XDA App
Just get to DL mode as xtone and I stated in post 2 & 3 . Then flashed to JFD with odin v1.3 and click the repartition box in odin and you'll be fine .
Sent from my SGH-T959 using XDA App
I had this problem for the last two days, but I found a way to fix it thanks to a user (whom I don't know the name of)
I did this to go back to stock firmware (JFD), make sure you have that downloaded.
Look for Eugene's Galaxy S Froyo PDA, for the i9000, not the Vibrant. Flash it through Odin with the 512 pit file. It's not going to boot up but take you to recovery mode instead, and it's going to remap your Volume buttons, but you can still get into DL mode (up is now down, and vice versa but whatever)
Now Odin back to stock, using the same 512 pit and there you go! Should boot up with no problem. Now you can redo everything, but remember to never partition through ROM Manager ever again!
Sent from my SGH-T959 using XDA App
Is there a link you could provide him?
AgentFour20 said:
That's only needed if he flashed a rom with the wrong kernel or if he flashed a rom without disabling voodoo .
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
His exact symptoms happened to me when the noob in me decided to repartition in Rom Manager awhile back. I am just suggesting he uses this tool as an option. It's definitely a good tool to use regardless of how he got where he got.
something like this happened to a buddy of mine, i'm trying to fix it, but the guy was completely stock so it makes no sense... I've tried everything, and i cant seem to find eugenes files...
Mr.Duck said:
something like this happened to a buddy of mine, i'm trying to fix it, but the guy was completely stock so it makes no sense... I've tried everything, and i cant seem to find eugenes files...
Click to expand...
Click to collapse
Eugenes rom are on his new site www.eb-production.proboards.com
Sent from my SGH-T959 using XDA App
OK, I got it fixed. Heres how.
I was finally able to get into ODIN and flash Eugenes Froyo.
So, from there, I was getting an MD5 checksum error when Id try to get into recovery, and I couldnt install the ROM Manager from the Market
Well, upon inspection of a the Nero V3 build I had downloaded, there was a ROMManager.apk there. So I pushed it onto my phone, reflashed to CWR (had to do it about 3 times) and reinstalled Nero V3.
After installing the build, I was able to re-enable voodoo and its theres no more MD5 craziness when I access the Recovery
trill12 said:
OK, I got it fixed. Heres how.
I was finally able to get into ODIN and flash Eugenes Froyo.
So, from there, I was getting an MD5 checksum error when Id try to get into recovery, and I couldnt install the ROM Manager from the Market
Well, upon inspection of a the Nero V3 build I had downloaded, there was a ROMManager.apk there. So I pushed it onto my phone, reflashed to CWR (had to do it about 3 times) and reinstalled Nero V3.
After installing the build, I was able to re-enable voodoo and its theres no more MD5 craziness when I access the Recovery
Click to expand...
Click to collapse
So voodoo was the culprit . lmao
I dont remember you ever mentioning that . Any way glad you figured it out and have your phone back .
AgentFour20 said:
So voodoo was the culprit . lmao
I dont remember you ever mentioning that . Any way glad you figured it out and have your phone back .
Click to expand...
Click to collapse
Apparently. Completely forgot I attempted to enable it. I was freaked all the way out trying to repair the damn thing.
Okay so Im trying to flash a rom, I have rooted it with super one click method. Im trying to flash a rom.
Usually in all the other phones that I have rooted and flashed sensation mt4g g2 g2x you root it then simply move on to CWM then you flash a recovery. It seems like the recovery isnt sticking..
I have looked for guides on how to flash. But a lot of them say there outdated.
Any ways if someone could give me a clue and point me in the right direction that would be lovely thanks!
Jerald2 said:
Okay so Im trying to flash a rom, I have rooted it with super one click method. Im trying to flash a rom.
Usually in all the other phones that I have rooted and flashed sensation mt4g g2 g2x you root it then simply move on to CWM then you flash a recovery. It seems like the recovery isnt sticking..
I have looked for guides on how to flash. But a lot of them say there outdated.
Any ways if someone could give me a clue and point me in the right direction that would be lovely thanks!
Click to expand...
Click to collapse
you need to odin a stock modified kernal.tar in order to get cwm to stick. Here it is:
http://goo.gl/QCYxT
If you need odin and samsung drivers, there in my guide here:
http://forum.xda-developers.com/showthread.php?t=1238070
Remember to only put the file in the PDA function of odin...
Okay thanks very much this odin thing is very different from what I'm used to.
Am I going to extract these files? obviously not drivers, but Odin files I extracted. Am I going to extract the kernal.tar?
I'm trying to install Miui its 2.3.4 so im guessing that other guide is the right one can someone confirm that this is safe?
http://forum.xda-developers.com/showthread.php?t=1212239
Sent from my HTC Sensation 4G using XDA App
Jerald2 said:
Okay thanks very much this odin thing is very different from what I'm used to.
Am I going to extract these files? obviously not drivers, but Odin files I extracted. Am I going to extract the kernal.tar?
I'm trying to install Miui its 2.3.4 so im guessing that other guide is the right one can someone confirm that this is safe?
http://forum.xda-developers.com/showthread.php?t=1212239
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
Yes use that guide
Someone Please please please help. This is my girlfriends phone i finally talked her into letting me root/flash it. Its not going right!!!!
Okay so im following that guide I got to step 4, it said boot up normally. It wouldnt boot up so I kept going.
Got to step 7 and this is what happens. http://www.youtube.com/watch?v=hwQMaQD2x7w
When I first open Clock work it says
E:Cant mount cache/recovery/command
E:Cant mount cache/recovery/Log
E:Cant open cache/recovery/Log
E:Cant mount cache/recovery/Last Log
E:Cant open cache/recovery/Last Log
Someone Please Please help.
edit: your not following the directions clearly... The problem is you continued past step 4 without letting your phone boot up. If you dont follow directions to a T you will brick your phone.
Okay, listen carefully. Go to jt1134's CM7 thread in fascinate development section. Go to the first page, scroll down until you see CWM fixed for CM7, download it. Use Odin to flash full stock ED05 with atlas 2.2 pit file, check the box for repartition, then hit start. Boot up, then power down and take battery out. Flash the CWM fixed for cm7 in Odin, unplug from computer, put battery back in, then (this is important!) hold both volume buttons and the power button until you see Samsung logo, then release. You will then be in the right recovery to flash any MTD ROM. Wipe all three, flash ROM, reboot. Also go to stickies in fascinate development, read "Going from Vanilla GB to anything else" thread. It will give you more details and is properly updated. Good luck!
~~~~There is no spoon~~~~
So where do you suggest I start to get thus thing at least back to stock?
sorry didnt see ya posted there. K I will Give that a shot seriously thank you.
Sent from my HTC Sensation 4G using XDA App
Jerald2 said:
So where do you suggest I start to get thus thing at least back to stock?
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
I gave you the link that provides all that information
---------- Post added at 12:13 PM ---------- Previous post was at 12:12 PM ----------
shag_on_e said:
Okay, listen carefully. Go to jt1134's CM7 thread in fascinate development section. Go to the first page, scroll down until you see CWM fixed for CM7, download it. Use Odin to flash full stock ED05 with atlas 2.2 pit file, check the box for repartition, then hit start. Boot up, then power down and take battery out. Flash the CWM fixed for cm7 in Odin, unplug from computer, put battery back in, then (this is important!) hold both volume buttons and the power button until you see Samsung logo, then release. You will then be in the right recovery to flash any MTD ROM. Wipe all three, flash ROM, reboot. Also go to stickies in fascinate development, read "Going from Vanilla GB to anything else" thread. It will give you more details and is properly updated. Good luck!
~~~~There is no spoon~~~~
Click to expand...
Click to collapse
all that info is in the link i provided for him
here is the going back to stock section in that link I provided.
* How to get back to stock after flashing any rom, follow these steps:
Step 1: Download this stock ed05 rom package by pentafive to your pc. you will need to unzip with 7zip or winrar, http://api.viglink.com/api/click?fo...144787558901&jsonp=vglnk_jsonp_13175749481381
Step 2: power off phone and pull battery
Step 3: open odin on your computer
Step 4: plug in factory usb cable and hold the volume down button. Yellow
triangle should appear saying "download mode"
Step 5: click on PDA in odin and find the vzw_official ed05.tar file(rom) you downloaded to your computer in step 1
Step 6: click on PIT in Odin and select the atlas 2.2 pit, it's in the file you downloaded in step 1
Step 7: click start and wait 5min, box in left hand corner of odin will say PASS, then click reset.
Step 8: unplug usb cable, put battery back in and boot phone.
You are now back to stock ed05.(verizon's latest release for the Fascinate)
shag_on_e said:
2.2 pit file, check the box for repartition, then hit start. Boot up,
Click to expand...
Click to collapse
When you mean boot up, what do you mean like start it normally? The last guide said that and it wouldnt boot up.
Also Is this it? http://forum.xda-developers.com/showthread.php?t=1190668?
That Link you gave me when I click on it. I only get "Parameter 'out' is required." bad link?
you can go back to original link on my first post and get everything there lol, but being the nice guy I am I went ahead and fixed the link.
Alright. So I got followed your guide and got cwm installed. I made a nandroid. I wiped everthing and flashed MIUI It booted up and runs. So im on step 8 on http://forum.xda-developers.com/showthread.php?t=1212239
When I try and install a app it says insufficient storage on device.
Is this because I didnt install ec09-modem.tar.md5 and GBBootloaders.tar?
I know that im not going to need to install Gaps. But I want to make sure these things ^^ up there are the right things for my rom.
I went ahead and risked it haha. It worked. Okay so now.. It says that I dont have root. Would I be okay to use the superone click method again to root it?
Jerald2 said:
Alright. So I got followed your guide and got cwm installed. I made a nandroid. I wiped everthing and flashed MIUI It booted up and runs. So im on step 8 on http://forum.xda-developers.com/showthread.php?t=1212239
When I try and install a app it says insufficient storage on device.
Is this because I didnt install ec09-modem.tar.md5 and GBBootloaders.tar?
I know that im not going to need to install Gaps. But I want to make sure these things ^^ up there are the right things for my rom.
I went ahead and risked it haha. It worked. Okay so now.. It says that I dont have root. Would I be okay to use the superone click method again to root it?
Click to expand...
Click to collapse
power off and pull battery, get back to dl mode, open odin and install the eco9 modem and gb bootloaders. reboot and see if everything is working. If you still dont have root and you may not, follow what directions below.
- superoneclick wont work.
-push this file below to you sd card
- long press the power button and select recovery(do not three finger into recovery once your on a mtd rom)
- install zip from sd like you did the rom.
http://dl.dropbox.com/u/25089906/su-2.3.6.1.x.zip
-you should now have root
Okay Ill do that THANKS SOOOOO MUCH!!
Is Clock work going to stick? Do I need to install rom manager and flash the newest one?
I tried to go into CMW through long press home and click recovery. It says Multiple packages tries to request sytem root permission wich is disabled by default to ensure system security. If you need to enable it, please go to setting in super user.
Witch im not seeing anyting
Jerald2 said:
Okay Ill do that THANKS SOOOOO MUCH!!
Is Clock work going to stick? Do I need to install rom manager and flash the newest one?
Click to expand...
Click to collapse
The kernal is already modified to allow cwm to stick and you should already have the latest kernal with the version of miui that you flashed. Im not a fan of rom manager, but thats just my opinion. Fwiw the only other kernal I would mess with is the glitch kernal. That has to be installed via odin. go into the dev section and look up the glitch kernal thread and read up on it. But before you do any of that, just get the phone up and running for a day, then go from there.
Yeah haha I just need to get root so I can back up her stuff.
But its not letting me get into recovery because it says that I dont have root. How am i supposed to get into it?
Jerald2 said:
Yeah haha I just need to get root so I can back up her stuff.
But its not letting me get into recovery because it says that I dont have root. How am i supposed to get into it?
Click to expand...
Click to collapse
If it won't let u get into cwm by long pressing power button then power phone off and try three finger into recovery(not suppose to do that with a mtd rom tho). Your only other option I know of is:
-odin back to stock
- boot up once then power off
-odin cwmall.tar from my guide
-three finger boot into recovery
-install root.zip from post 14
-reboot then power off
-odin cwm4
-three finger boot into recovery
-install miui.zip from sd
-reboot
-follow directions from step 8 on in the vanilla guide.
I've basically soft bricked my phone and haven't got a clue how to fix it. I've read everything and tried everything and still can't get it working with my knowledge.
I tried to flash resurrection v1.0 but phone just hung on the GSII startup screen and froze. I've tried different kernels so that i can flash from external SD card but whenever i try this, it always says bad file (no matter what file i try use to flash). When i try flash from the internal SD card, it says its all successful (for the resurrection 1.0) but i'm back to where i started.
I think i need to flash the firmware using odin but i can't find the right files. Anyone got any ideas how to fix this issue? I've been playing around with it for 10 hours roughly now.
The original kernel i used when i flashed to resurrection 9.4 was for XWKI4.
Thanks.
Nelinski said:
I've basically soft bricked my phone and haven't got a clue how to fix it. I've read everything and tried everything and still can't get it working with my knowledge.
I tried to flash resurrection v1.0 but phone just hung on the GSII startup screen and froze. I've tried different kernels so that i can flash from external SD card but whenever i try this, it always says bad file (no matter what file i try use to flash). When i try flash from the internal SD card, it says its all successful (for the resurrection 1.0) but i'm back to where i started.
I think i need to flash the firmware using odin but i can't find the right files. Anyone got any ideas how to fix this issue? I've been playing around with it for 10 hours roughly now.
The original kernel i used when i flashed to resurrection 9.4 was for XWKI4.
Thanks.
Click to expand...
Click to collapse
Am sure you didnt search before posting but i recommend this
download this and extract, you get three files
load pda, modem and csc
also load pit in the pit tab, uncheck repartition and flash with odin 1.85
goodluck.
http://hotfile.com/dl/123612065/a85a23d/I9100JPKF3.rar.html
http://hotfile.com/dl/139350663/9ba2e55/u1_02_20110310_emmc_EXT4.pit.rar.html
---------- Post added at 04:41 PM ---------- Previous post was at 04:39 PM ----------
here is odin incase you are too lazy to search
http://www.4shared.com/rar/dHnCINEN/odin_185.html
put phone in download mode by pressing volume - +home+power
connect.
If this help and i am sure only flash siyahs kernel... Start CWM and Clear Cache Data and and and all with Clear.. Than flash again.... I had the same prob 3 times because i always flshed over and forgot to cler data;cache;dalvik-cache...
Sent from my GT-I9100 using xda premium
How to flash with Odin Hold Volume UP + Home button + Power button...
Sent from my GT-I9100 using xda premium
Thanks for the help but had one last attempt and got it working. Thanks everyone who helped.
Kaffee4Eck said:
How to flash with Odin Hold Volume UP + Home button + Power button...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Thats wrong .
Down not up .
jje
JJEgan said:
Thats wrong .
Down not up .
jje
Click to expand...
Click to collapse
I'm not sure that guy (Kaffee4Eck) knows what he's talking about anyways. In another thread, he also suggested an I9100G user to flash Siyah kernel.
Right i've got it back working with 2.3.4 i think it is, however i still don't want to give in to getting resurrection 1.0.
Are there any steps i'm missing which causes it to hang on GSII startup then restart into the stock kernel? Tried flashing the old bootloader as well which didn't help.
Nelinski said:
Right i've got it back working with 2.3.4 i think it is, however i still don't want to give in to getting resurrection 1.0.
Are there any steps i'm missing which causes it to hang on GSII startup then restart into the stock kernel? Tried flashing the old bootloader as well which didn't help.
Click to expand...
Click to collapse
If you're having trouble flashing a custom ROM, first place to start would be the thread for that particular custom ROM.
All custom ROMs should have detailed installation instructions. Make sure you are following them to the letter.
If you are flashing kernels, you must make sure you flash a kernel meant for your phone, and meant for your build. Hang on boot screen usually means you have a file not compatible with your build of Android. Could be kernel, but could also be another system file.
I have been searching, its what im currently doing now but everyone seems to have got it working or have completely different problems to me.
http://forum.xda-developers.com/showthread.php?t=1436854
Literally followed it step for step, there isn't much to it. When i did 9.4 it had the same steps and that all worked fine, so i must be missing something pretty damn important here.
So when you say:
Nelinski said:
Are there any steps i'm missing which causes it to hang on GSII startup then restart into the stock kernel? Tried flashing the old bootloader as well which didn't help.
Click to expand...
Click to collapse
what do you mean by restart into the stock kernel? This part of the sentence doesn't make sense.
Are you saying it is hanging on the boot logo for a very long time, then it boots normally, but you are not on the new ROM?
Sorry, what i was trying to say was the galaxy s 2 logo shows for about 5 seconds then the phone restarts itself into recovery mode (which is the new kernel included with the resurrection 1.0 flash).
Nelinski said:
Sorry, what i was trying to say was the galaxy s 2 logo shows for about 5 seconds then the phone restarts itself into recovery mode (which is the new kernel included with the resurrection 1.0 flash).
Click to expand...
Click to collapse
And now this sentence doesn't make sense.
So when it restarts into recovery, it is stock recovery instead of CWM recovery? Is that what you mean?
Stock recovery will only have like 4 or 5 line entries, with no options to back up/restore. CWM recovery will have substantially more options.
EDIT to add: BTW - did you see under the "Rom Installation (please don`t miss any step! )" section... there is text that says: "NOTE: İF YOU WANT FLASH SOMETHİNG FROM CWM RECOVERY FİRST YOU MUST İNSTALL CWM.ZİP FROM STOCK RECOVERY MOD(APPLY UPDATE FROM EXTERNAL STORAGE AND CHOOSE CWM.ZİP AND İNSTALL)
AND NOW TOUCH RECOVERY MODE WİLL APPEAR THAN YOU CAN FLASH ZİP FİLES"
---------- Post added at 03:23 PM ---------- Previous post was at 03:11 PM ----------
Also, you seem to be mixing up the terms kernel and recovery. They are NOT the same. You should read up on what those two terms actually mean.
"So when it restarts into recovery, it is stock recovery instead of CWM recovery? Is that what you mean?"
Yeah thats what i meant sorry, been a long day lol. I don't really get what the last bit means..
"NOTE: İF YOU WANT FLASH SOMETHİNG FROM CWM RECOVERY FİRST YOU MUST İNSTALL CWM.ZİP FROM STOCK RECOVERY MOD(APPLY UPDATE FROM EXTERNAL STORAGE AND CHOOSE CWM.ZİP AND İNSTALL)
AND NOW TOUCH RECOVERY MODE WİLL APPEAR THAN YOU CAN FLASH ZİP FİLES"
I've got cwm and can flash roms if thats what it means? Sorry for sounding like such a noob..
Nelinski said:
"So when it restarts into recovery, it is stock recovery instead of CWM recovery? Is that what you mean?"
Yeah thats what i meant sorry, been a long day lol. I don't really get what the last bit means..
"NOTE: İF YOU WANT FLASH SOMETHİNG FROM CWM RECOVERY FİRST YOU MUST İNSTALL CWM.ZİP FROM STOCK RECOVERY MOD(APPLY UPDATE FROM EXTERNAL STORAGE AND CHOOSE CWM.ZİP AND İNSTALL)
AND NOW TOUCH RECOVERY MODE WİLL APPEAR THAN YOU CAN FLASH ZİP FİLES"
I've got cwm and can flash roms if thats what it means? Sorry for sounding like such a noob..
Click to expand...
Click to collapse
So... You know there's also a video guide on installation in that thread too, right? I've never installed this ROM, so I've about reached the limit of how far I can help you if you don't understand that last bit, as you say.
Indeed, i've watched it several times. Thats what i don't get. Everything looks the same, yet i'm the one with the problem lol.
I basically go into custom recovery, install the 3 things (rom, and both gapps), clear the cache and dalvik cache yet it goes freezes on logo then restarts into stock recovery.
Nelinski said:
Indeed, i've watched it several times. Thats what i don't get. Everything looks the same, yet i'm the one with the problem lol.
I basically go into custom recovery, install the 3 things (rom, and both gapps), clear the cache and dalvik cache yet it goes freezes on logo then restarts into stock recovery.
Click to expand...
Click to collapse
Well, only 2 more posts, and you can post in the actual ROM thread to ask for help. Maybe the ROM chef can help you more.
Yeah, thanks for all the help mate, i appreciate your time.
gsmxpert said:
Am sure you didnt search before posting but i recommend this
download this and extract, you get three files
load pda, modem and csc
also load pit in the pit tab, uncheck repartition and flash with odin 1.85
goodluck.
http://hotfile.com/dl/123612065/a85a23d/I9100JPKF3.rar.html
http://hotfile.com/dl/139350663/9ba2e55/u1_02_20110310_emmc_EXT4.pit.rar.html
---------- Post added at 04:41 PM ---------- Previous post was at 04:39 PM ----------
here is odin incase you are too lazy to search
http://www.4shared.com/rar/dHnCINEN/odin_185.html
put phone in download mode by pressing volume - +home+power
connect.
Click to expand...
Click to collapse
Thanks man found this thread and it solved my problem in minutes. Phone no longer has yellow triangle and is back to normal.
Sent from my GT-I9100 using xda premium
I'm not new to installing custom ROMs, I've been doing it for several years to many phones and to my Galaxy Tab P7510.
But, I'm in a spot that I haven't been able to recover, I'm hoping you can help.
Facts: Running TWRP and Infamous AOKP ROM.
Here's what happened. Last night I was using my Tab and it went black. I mean it just shut down. Turned off. So, I just power it on. It starts the boot process and I can see the boot animation for Infamous ROM. There's a spinning circle of dots during boot so I know it's booting. After about a minute or so the circle stops spinning. Not good. It's frozen. I let it sit for at least a half hour thinking I'm being patient. No go. Try several more times, same result.
Ok, time to go into TWRP and reflash the ROM. I hold the power and volume down. When the screen pops up (is this the boot loader?) I choose recovery, not download mode. I see the Infamous Logo for TWRP (Infamous has it's own branded version of TWRP) and get ready to flash. But, wait! It freezes too. It never gets into recovery. Just sits there. I try again. Same thing. I let it sit for a while and eventually it just reboots the Tab.
Ok, I figure that something in recovery or the OS has been fried. I need to do an Odin to get TWRP or CWM flashed. I boot the Tab into Download mode. I connect the TAB to my PC. The PC chirps letting me know it's connected. (I have the Samsung drivers already installed). I download CWM tar file. I then download the latest Odin, v4.44.
Now, here's where I'm stuck. Odin doesn't see a Tab connected. The Tab sits in "Downloading..." mode. I've reinstalled the Samsung drivers just to be safe. Same result.
What can I do next to fix this?
More info: I can see the "Samsung Device" toast message appear when connected. I also see "Samsung Android Device" in Device Manager. I also see "Connected! Press the [Start] button on Odin3" on the Tab's screen. This leads me to believe that the device is properly connected to the PC. So, why doesn't Odin see it?
Update:
While I couldn't get ODIN 4.xx to work, I downloaded Odin 3.07 and was able to put CyanogenMod on the Tab. I was able to successfully install Infamous 1.9.1 from within CyanogenMod. But, when I tried to clear Dalvik the Tab just hung. Reboot into recovery. I try to clear cache and the Tab hangs. I reinstall Infamous and reboot. In the middle of the reboot while the boot animation is showing it hangs. Time after time it hangs.
I think there's something seriously wrong with the hardware and I'll never be able to get this thing revived. Maybe it's time to go tablet shopping... Sigh, sad times, the Tab was like a good friend.
TabGuy said:
Update:
While I couldn't get ODIN 4.xx to work, I downloaded Odin 3.07 and was able to put CyanogenMod on the Tab. I was able to successfully install Infamous 1.9.1 from within CyanogenMod. But, when I tried to clear Dalvik the Tab just hung. Reboot into recovery. I try to clear cache and the Tab hangs. I reinstall Infamous and reboot. In the middle of the reboot while the boot animation is showing it hangs. Time after time it hangs.
I think there's something seriously wrong with the hardware and I'll never be able to get this thing revived. Maybe it's time to go tablet shopping... Sigh, sad times, the Tab was like a good friend.
Click to expand...
Click to collapse
You could always try to go a bit further back in software and use a stock rom, as well as repartition using .pit file as trying to pile custom rom on custom rom with all the kernel and boot image variations is eventually asking for trouble. Lots of people have lots of differing results with this tab which can be "random" to say the very least but at least with Odin and repartition you can be fairly certain that everything has been set back to zero. My best results on this tab have always been with Odin 1.3 tho others will say otherwise. Remember seeing you posting a lot a couple of years back I think...
Cheers
sent from my still superb Google I/O 7510 (xda hd)
@TabGuy Yep...yep...our Sammy devices are tough to break fully,but they have gremlins... I had a similar problem. My tab wouldn't boot( hang at boot screen ).. So I tried to reflash ROM.. Here's where its different ( but the same, I think ).. I could wipe cache and dalvik but not data.. So I dirty flashed and it hung up ( no surprise ). I switched rec..( same deal ). I wasn't near a computer so I thought I was done.. I didn't have anything on the tab I couldn't replace...so I said to hell with it and wiped cache and dalvik again flashed ROM and then I formatted the sdcard with twrp and it booted right up... Long story short.. I had something on the sdcard that was corrupting it.. I think.. Maybe you do too..?
Gil81 said:
@TabGuy Yep...yep...our Sammy devices are tough to break fully,but they have gremlins... I had a similar problem. My tab wouldn't boot( hang at boot screen ).. So I tried to reflash ROM.. Here's where its different ( but the same, I think ).. I could wipe cache and dalvik but not data.. So I dirty flashed and it hung up ( no surprise ). I switched rec..( same deal ). I wasn't near a computer so I thought I was done.. I didn't have anything on the tab I couldn't replace...so I said to hell with it and wiped cache and dalvik again flashed ROM and then I formatted the sdcard with twrp and it booted right up... Long story short.. I had something on the sdcard that was corrupting it.. I think.. Maybe you do too..?
Click to expand...
Click to collapse
Ok, I think we're getting somewhere. However, formatting data or SD card just hung. I just went down the list and formatted everything. It seemed to work. Everything is clear and not the other formats work just fine. CWM works fine all around.
That's the good news. The bad news is that I now have a Tab with a recovery that works fine but no Android OS and no zip file on the SD card to install. How do I get a file onto the Tab to flash? I know that TWRP let's me flash from an external card (at least I've done this on a phone) but I have CWM on the phone and not TWRP. How do I access a zip file to flash?
TabGuy said:
Ok, I think we're getting somewhere. However, formatting data or SD card just hung. I just went down the list and formatted everything. It seemed to work. Everything is clear and not the other formats work just fine. CWM works fine all around.
That's the good news. The bad news is that I now have a Tab with a recovery that works fine but no Android OS and no zip file on the SD card to install. How do I get a file onto the Tab to flash? I know that TWRP let's me flash from an external card (at least I've done this on a phone) but I have CWM on the phone and not TWRP. How do I access a zip file to flash?
Click to expand...
Click to collapse
OK.. So you formatted the system..if you didn't. Your ROM is still there.. If you did, than grab a ROM in ( .tar ) format to flash with Odin.. You could grab the stock 4.0.4 firmware from Sammobile or search around for one. Make sure the ROM has a kernel with it or is compatible with the kernel you have now.. I've never grabbed one from Sammobile but I would imagine that the kernel file is in the download with the stock firmware file.. Or flash a different kernel then the ROM that matches up.. Just remember Odin needs a tar file..
Gil81 said:
OK.. So you formatted the system..if you didn't. Your ROM is still there.. If you did, than grab a ROM in ( .tar ) format to flash with Odin.. You could grab the stock 4.0.4 firmware from Sammobile or search around for one. Make sure the ROM has a kernel with it or is compatible with the kernel you have now.. I've never grabbed one from Sammobile but I would imagine that the kernel file is in the download with the stock firmware file.. Or flash a different kernel then the ROM that matches up.. Just remember Odin needs a tar file..
Click to expand...
Click to collapse
Thanks for your help. I have two questions: 1) Where do I find a ROM in .tar format? I've only ever seen .zip files. 2) Once I do find a file in .tar format which option in Odin do I use? Is it PDA like the recovery file?-
TabGuy said:
Thanks for your help. I have two questions: 1) Where do I find a ROM in .tar format? I've only ever seen .zip files. 2) Once I do find a file in .tar format which option in Odin do I use? Is it PDA like the recovery file?-
Click to expand...
Click to collapse
You need to watch this video and read the thread.... http://forum.xda-developers.com/showthread.php?t=2142268 .... You can grab the stock ROM from Sammobile.com or Samsung-updates.com.. After you watch the video and do a little research... Let me know if you need any help.
---------- Post added at 12:46 AM ---------- Previous post was at 12:37 AM ----------
TabGuy said:
Thanks for your help. I have two questions: 1) Where do I find a ROM in .tar format? I've only ever seen .zip files. 2) Once I do find a file in .tar format which option in Odin do I use? Is it PDA like the recovery file?-
Click to expand...
Click to collapse
I watched that video and its not very good...watch this one... https://www.youtube.com/watch?v=KYBs98R9rTs&feature=youtube_gdata_player ...QBKing77.. He makes the best vids... The files are in the description that you need.. After this you can use Odin to flash a custom recovery and reroot.. Then flash a ROM of choice..providing it is flashable from the new recovery...
Gil81 said:
You need to watch this video and read the thread.... http://forum.xda-developers.com/showthread.php?t=2142268 .... You can grab the stock ROM from Sammobile.com or Samsung-updates.com.. After you watch the video and do a little research... Let me know if you need any help.
---------- Post added at 12:46 AM ---------- Previous post was at 12:37 AM ----------
I watched that video and its not very good...watch this one... https://www.youtube.com/watch?v=KYBs98R9rTs&feature=youtube_gdata_player ...QBKing77.. He makes the best vids... The files are in the description that you need.. After this you can use Odin to flash a custom recovery and reroot.. Then flash a ROM of choice..providing it is flashable from the new recovery...
Click to expand...
Click to collapse
Thanks for being so helpful. I've watched both videos. I think I know how to do this. I just can't find the tar file. The big DOWNLOAD button described in the video no longer exists. It points me to the SamMobile site instead.
I go to SamMobile (I've registered) and I put in my tablet information and about 5 screens later I get to a download page. But, in the end I get to download a ZIP file, not a TAR file. I'm about ready to throw in the towel. At least for tonight. I'm so close I can taste it, I just wish it wasn't so hard to find the tar file.
TabGuy said:
Thanks for being so helpful. I've watched both videos. I think I know how to do this. I just can't find the tar file. The big DOWNLOAD button described in the video no longer exists. It points me to the SamMobile site instead.
I go to SamMobile (I've registered) and I put in my tablet information and about 5 screens later I get to a download page. But, in the end I get to download a ZIP file, not a TAR file. I'm about ready to throw in the towel. At least for tonight. I'm so close I can taste it, I just wish it wasn't so hard to find the tar file.
Click to expand...
Click to collapse
Grab some sleep and check back tomorrow.. Ill find one and link you to it...
Gil81 said:
Grab some sleep and check back tomorrow.. Ill find one and link you to it...
Click to expand...
Click to collapse
I gotta thank you again. I just couldn't go to bed yet. I think I'm on to something. I downloaded that ZIP file anyway from SamMobile. Took 30 minutes for only a 400 meg file. Turns out the TAR file's inside the zip file, which I was hoping. I'm flashing it now.
Edit: It booted into Original TouchWiz. Woohoo. The Samsung logo felt like an old friend.
Again, thanks for your help! I'm indebted to you and hopefully I can pay it forward.
As Promised..
Here ya go...stock 4.0.4 with directions... http://wikiclouded.com/galaxy-tab-10-1-p7510-official-firmware-android-4-0-nluk/ ...Go Get Wiki With It...sorry, couldn't help myself... don't judge me its late..lmao. @TabGuy
---------- Post added at 01:55 AM ---------- Previous post was at 01:53 AM ----------
TabGuy said:
I gotta thank you again. I just couldn't go to bed yet. I think I'm on to something. I downloaded that ZIP file anyway from SamMobile. Took 30 minutes for only a 400 meg file. Turns out the TAR file's inside the zip file, which I was hoping. I'm flashing it now.
Edit: It booted into Original TouchWiz. Woohoo. The Samsung logo felt like an old friend.
Again, thanks for your help! I'm indebted to you and hopefully I can pay it forward.
Click to expand...
Click to collapse
Ya ****..man its late..you have to unzip it..I'm going to bed..lol. Glad to hear you're back..
TabGuy said:
Thanks for being so helpful. I've watched both videos. I think I know how to do this. I just can't find the tar file. The big DOWNLOAD button described in the video no longer exists. It points me to the SamMobile site instead.
I go to SamMobile (I've registered) and I put in my tablet information and about 5 screens later I get to a download page. But, in the end I get to download a ZIP file, not a TAR file. I'm about ready to throw in the towel. At least for tonight. I'm so close I can taste it, I just wish it wasn't so hard to find the tar file.
Click to expand...
Click to collapse
Files from SamMobile are hosted on a download site in zip format, download it and unzip with winrar, 7zip, whatever.
tar.md5 file that you get goes in PDA in Odin, .pit file goes in PIT, leave the default options in Odin checked and make sure to check partition as well if you are using .pit file (in your case you should do this as it really will be spring clean).
Kernel is, of course, contained within the tar.md5 rom file.
Edit - I'm working nights and have just clocked off.... Put in this post above then noticed that xda premium hadn't updated and you had subsequently posted that you had succeeded....
Good for you! Long life to your 10.1
sent from my still superb Google I/O 7510 (xda hd)
TabGuy said:
Thanks for being so helpful. I've watched both videos. I think I know how to do this. I just can't find the tar file. The big DOWNLOAD button described in the video no longer exists. It points me to the SamMobile site instead.
I go to SamMobile (I've registered) and I put in my tablet information and about 5 screens later I get to a download page. But, in the end I get to download a ZIP file, not a TAR file. I'm about ready to throw in the towel. At least for tonight. I'm so close I can taste it, I just wish it wasn't so hard to find the tar file.
Click to expand...
Click to collapse
Unzip the zip file. The tar file is inside.
Edit: oh wait nvm. Didn't notice there was another page. Silly me.
Sent from my GT-P7500 using Tapatalk HD
First let me thank everyone for the help. My Tab is back on Ice Cream Sandwich and TouchWiz
Now, the search continues. I looked at all the sticky posts about how to root and flash CWM. I've watched all the videos to refresh my memory on how to do it. I'm ready to go BUT all of the links to the downloads need are broken. They've decayed due to neglect. I imagine that the OPs have gone on to other tablets.
So, where do I go to get the files necessary to root and flash a new recovery? This time I'll make sure I save them on my PC for sure!
Thanks in advance for your help.
TabGuy said:
First let me thank everyone for the help. My Tab is back on Ice Cream Sandwich and TouchWiz
Now, the search continues. I looked at all the sticky posts about how to root and flash CWM. I've watched all the videos to refresh my memory on how to do it. I'm ready to go BUT all of the links to the downloads need are broken. They've decayed due to neglect. I imagine that the OPs have gone on to other tablets.
So, where do I go to get the files necessary to root and flash a new recovery? This time I'll make sure I save them on my PC for sure!
Thanks in advance for your help.
Click to expand...
Click to collapse
Twrp recovery... http://forum.xda-developers.com/showthread.php?t=1833136 .. Use the dd method..Bam you have a recovery..But make sure you have the ROM you want to flash already on the tab/w all the files you need( gapps ).. This way if something goes side ways after booting to recovery you have a ROM/gapps to get back...Always have a backup plan... I try to..and it helps. ............Scratch this... I'm an idiot...forgot you're not rooted..
Gil81 said:
Twrp recovery... http://forum.xda-developers.com/showthread.php?t=1833136 .. Use the dd method..Bam you have a recovery..But make sure you have the ROM you want to flash already on the tab/w all the files you need( gapps ).. This way if something goes side ways after booting to recovery you have a ROM/gapps to get back...Always have a backup plan... I try to..and it helps. ............Scratch this... I'm an idiot...forgot you're not rooted..
Click to expand...
Click to collapse
Yeah, getting rooted is where I'm stuck. I could only find CWM v4.0.0.4. Then I found a Samsung_Galaxy_Tab_10.1_root.ZIP file and installed it. But, alas, I have no root. At least I can't get root access in File Manager HD. I do have a SuperUser app installed which normally means root but I can't install a rom either.
I'm just stuck now. I guess this what happens when support for a product decays. It's very hard to find the right files anymore. I wish I'd have saved them when I did this the first time.
If anyone has access to the proper CWM and Samsung_Galaxy_Tab_10.1_root.zip file for the P7510 (wifi) I'd be very happy if I could borrow them
If I can't get them then I guess I'm going tablet shopping for a new tablet. I can't live on ICS and TouchWiz.
TabGuy said:
Yeah, getting rooted is where I'm stuck. I could only find CWM v4.0.0.4. Then I found a Samsung_Galaxy_Tab_10.1_root.ZIP file and installed it. But, alas, I have no root. At least I can't get root access in File Manager HD. I do have a SuperUser app installed which normally means root but I can't install a rom either.
I'm just stuck now. I guess this what happens when support for a product decays. It's very hard to find the right files anymore. I wish I'd have saved them when I did this the first time.
If anyone has access to the proper CWM and Samsung_Galaxy_Tab_10.1_root.zip file for the P7510 (wifi) I'd be very happy if I could borrow them
If I can't get them then I guess I'm going tablet shopping for a new tablet. I can't live on ICS and TouchWiz.
Click to expand...
Click to collapse
You can't boot to recovery and install a ROM..that is rooted..
---------- Post added at 05:48 PM ---------- Previous post was at 05:46 PM ----------
I don't understand.. If you have cwm..flash the new twrp recovery and then the ROM of choice...
---------- Post added at 05:53 PM ---------- Previous post was at 05:48 PM ----------
TabGuy said:
Yeah, getting rooted is where I'm stuck. I could only find CWM v4.0.0.4. Then I found a Samsung_Galaxy_Tab_10.1_root.ZIP file and installed it. But, alas, I have no root. At least I can't get root access in File Manager HD. I do have a SuperUser app installed which normally means root but I can't install a rom either.
I'm just stuck now. I guess this what happens when support for a product decays. It's very hard to find the right files anymore. I wish I'd have saved them when I did this the first time.
If anyone has access to the proper CWM and Samsung_Galaxy_Tab_10.1_root.zip file for the P7510 (wifi) I'd be very happy if I could borrow them
If I can't get them then I guess I'm going tablet shopping for a new tablet. I can't live on ICS and TouchWiz.
Click to expand...
Click to collapse
http://galaxytabhacks.com/galaxy-tab-10-1-hacks/how-to-root-galaxy-tab-10-1-the-easy-way/ . root zip..
Gil81 said:
You can't boot to recovery and install a ROM..that is rooted..
---------- Post added at 05:48 PM ---------- Previous post was at 05:46 PM ----------
I don't understand.. If you have cwm..flash the new twrp recovery and then the ROM of choice...
---------- Post added at 05:53 PM ---------- Previous post was at 05:48 PM ----------
http://galaxytabhacks.com/galaxy-tab-10-1-hacks/how-to-root-galaxy-tab-10-1-the-easy-way/ . root zip..
Click to expand...
Click to collapse
I know this all sounds easy. And it was the first time I did this. However, the links in all the tutorials are broken. I can't get the right files to get rooted. Once I'm rooted I'll be on my way. I just can't get there. I know it sounds insanely simple but it's not.
Here I am, crying about another bricked Samsung Galaxy Player. All of the other threads either have outdated links, or are not the 5.0 USA version. Anyway, here's my problem:
I was trying different ROMs and then my device got locked into a boot loop. In my trying to fix it, I bricked it. The display shows the image of the phone, yellow triangle, and computer connected by dots. To troubleshoot this, I have tried so many different tutorials on forums, etc. The most recent one I have tried is Here. I think I need to just completely re-install the original firmware, ROM, and whatever else I need to. I tried using the oneclick.jar file with arch linux; it seemed to execute and copy everything to the device, but nothing happened. Anyway I'm really new to all of this, so any help would be appreciated.
Thanks in advance!
-Samsung Galaxy Player 5.0 - USA (YP-G70)
Edit: I tried the instructions at this post: Here. My device randomly shuts off in the middle of the third step.
Also, if you run into the download screen flicker/slide problem, the solution to all of this is in my post at the bottom.
coltoverson said:
Here I am, crying about another bricked Samsung Galaxy Player. All of the other threads either have outdated links, or are not the 5.0 USA version. Anyway, here's my problem:
I was trying different ROMs and then my device got locked into a boot loop. In my trying to fix it, I bricked it. The display shows the image of the phone, yellow triangle, and computer connected by dots. To troubleshoot this, I have tried so many different tutorials on forums, etc. The most recent one I have tried is Here. I think I need to just completely re-install the original firmware, ROM, and whatever else I need to. I tried using the oneclick.jar file with arch linux; it seemed to execute and copy everything to the device, but nothing happened. Anyway I'm really new to all of this, so any help would be appreciated.
Thanks in advance!
-Samsung Galaxy Player 5.0 - USA (YP-G70)
Edit: I tried the instructions at this post: Here. My device randomly shuts off in the middle of the third step.
Click to expand...
Click to collapse
maybe its not fully charged? not sure which step it is but i do know one of the times you are connected and using odin, takes a few minutes so don't panic. try leaving it at step 3 and not touching it.
Lorddemonrage said:
maybe its not fully charged? not sure which step it is but i do know one of the times you are connected and using odin, takes a few minutes so don't panic. try leaving it at step 3 and not touching it.
Click to expand...
Click to collapse
The little colored area that shows the status turns red and says "error." I'm thinking it must be the low battery charge, but how do I go about re-charging it? If i plug it into the charger, it'll go through 5-minute cycles of being off and on, which is not enough time to complete all 3 steps. I'm guessing the 5-minute cycles are charge/discharge cycles that the device performs. Either way, I'm still not sure what to do. Also, do I need to install a bootloader from odin?
See if this helps:
http://www.youtube.com/watch?v=Uzu4uDTDL5k
coltoverson said:
The little colored area that shows the status turns red and says "error." I'm thinking it must be the low battery charge, but how do I go about re-charging it? If i plug it into the charger, it'll go through 5-minute cycles of being off and on, which is not enough time to complete all 3 steps. I'm guessing the 5-minute cycles are charge/discharge cycles that the device performs. Either way, I'm still not sure what to do. Also, do I need to install a bootloader from odin?
Click to expand...
Click to collapse
I'd try to install a boot loader, aslong as the device powers on and you can get it into download mode and connected to odin to flash a boot loader you should be good. Not sure about everyone else but i already have 4 roms stored on my device so the last time this happened, i just got a bootloader into there via odin, got into cwm and wiped/flash everything again.
Bootloader
Lorddemonrage said:
I'd try to install a boot loader, aslong as the device powers on and you can get it into download mode and connected to odin to flash a boot loader you should be good. Not sure about everyone else but i already have 4 roms stored on my device so the last time this happened, i just got a bootloader into there via odin, got into cwm and wiped/flash everything again.
Click to expand...
Click to collapse
I'm not really sure which bootloader I'm supposed to use, so I got the one from this thread. I extracted the "GalaxyPlayer-Bootloader.zip" and found multiple files, such as odin and the bootloader file, in the zip archive. The bootloader file was compressed as a .rar, so I extracted it and then archived it as a .tar and used that file for the bootloader option in odin. Nothing happened, the green progress bar didn't go anywhere and eventually the battery cycle ran through and odin said it failed. I'm not sure if the correct files were in the bootloader .tar archive, so here's what I put in there: "boot.bin", "param.lfs", "Sbl.bin"
Are these the files needed in the .tar archive for a bootloader? Or do I only need "boot.bin"?
Thanks so much again for the help!
Never use the bootloader option in Odin for this device. Always use PDA.
Sent from my SAMSUNG-SGH-I577 using xda app-developers app
---------- Post added at 08:43 PM ---------- Previous post was at 08:41 PM ----------
I would not use those bootloaders either. Those will only get you download mode. Instead flash a ROM that has bootloaders in it.
Sent from my SAMSUNG-SGH-I577 using xda app-developers app
---------- Post added at 08:44 PM ---------- Previous post was at 08:43 PM ----------
Files stay inside .tar file
Sent from my SAMSUNG-SGH-I577 using xda app-developers app
coltoverson said:
I'm not really sure which bootloader I'm supposed to use, so I got the one from this thread. I extracted the "GalaxyPlayer-Bootloader.zip" and found multiple files, such as odin and the bootloader file, in the zip archive. The bootloader file was compressed as a .rar, so I extracted it and then archived it as a .tar and used that file for the bootloader option in odin. Nothing happened, the green progress bar didn't go anywhere and eventually the battery cycle ran through and odin said it failed. I'm not sure if the correct files were in the bootloader .tar archive, so here's what I put in there: "boot.bin", "param.lfs", "Sbl.bin"
Are these the files needed in the .tar archive for a bootloader? Or do I only need "boot.bin"?
Thanks so much again for the help!
Click to expand...
Click to collapse
took a look at the archive, just extract it to a folder on your desktop. open Odin3 v1.81
where is says "PIT" in the middle click on that and select the only file it shows.
Under "PIT" is "BOOTLOADER" check the box next to that then click on "BOOTLOADER" and select the download mode only one. hit start and wait for it to do its thing, should prompt you to disconnect the device after a few minutes and it will reboot into cwm, from there flash whatever rom file you have on your device. If you don't have one then see if you can load one onto a micro sd card and pop that into the galaxy player.
Meticulus said:
Never use the bootloader option in Odin for this device. Always use PDA.
Sent from my SAMSUNG-SGH-I577 using xda app-developers app
---------- Post added at 08:43 PM ---------- Previous post was at 08:41 PM ----------
I would not use those bootloaders either. Those will only get you download mode. Instead flash a ROM that has bootloaders in it.
Sent from my SAMSUNG-SGH-I577 using xda app-developers app
---------- Post added at 08:44 PM ---------- Previous post was at 08:43 PM ----------
Files stay inside .tar file
Sent from my SAMSUNG-SGH-I577 using xda app-developers app
Click to expand...
Click to collapse
my mistake, use pda. been awhile since mine was semi-bricked.
Solution!
Lorddemonrage said:
took a look at the archive, just extract it to a folder on your desktop. open Odin3 v1.81
where is says "PIT" in the middle click on that and select the only file it shows.
Under "PIT" is "BOOTLOADER" check the box next to that then click on "BOOTLOADER" and select the download mode only one. hit start and wait for it to do its thing, should prompt you to disconnect the device after a few minutes and it will reboot into cwm, from there flash whatever rom file you have on your device. If you don't have one then see if you can load one onto a micro sd card and pop that into the galaxy player.
my mistake, use pda. been awhile since mine was semi-bricked.
Click to expand...
Click to collapse
First of all, thanks so much for all of the support. I feel really stupid for thinking that the .tar file was a .rar file; I have no clue how I mixed that up. Anyways, I got it fixed and here's how I did it for anyone else with the same problem as me:
I kept trying the method of uploading the pit, followed by the two ROMs, but that still wouldn't work. I tried stopping it in between two steps, because I figured the random shutdown might have been because of a battery charge issue or something. Once I successfully paused between the two steps, and carried out all three, I tried to boot into recovery, and instead, the little circle made of dots would appear for a split-second, followed by a freaky-looking download mode screen sliding everywhere and flickering. At first I thought it was a hardware failure, and that I might need to replace the screen. If you have this problem, a broken screen is not the case!!! To solve this, download this .zip file (from this thread) which is the factory bootloader. You will also need a micro-SD card. Make sure to put your device in download mode by pressing and holding the down volume button and the power button at the same time, even if your screen says that it is in download mode, it may not be in download mode. Unzip the .zip file, and run odin. Choose the .pit file, and for the PDA, choose "GalaxyPlayerBootloaders.tar", and not the "GalaxyPlayerDownloadModeOnly.tar". Start odin, and as soon as your device does the automatic shutdown, hold the up volume button and the power button at the same time. This will get you into recovery mode at last, and now just use a micro SD card to install the factory ROM (downloaded from here) on the device.
Samsung Galaxy S 5.0 wifi europe version
ok how about a Samsung Galaxy S 5.0 wifi europe version dead by trying to flash the wrong firmware to it
now there are no display no software can read the device
only connecting sound when connected to pc
any help anyone?!!
kings121 said:
ok how about a Samsung Galaxy S 5.0 wifi europe version dead by trying to flash the wrong firmware to it
now there are no display no software can read the device
only connecting sound when connected to pc
any help anyone?!!
Click to expand...
Click to collapse
Alright so get a rom from this page. You'll need to get an international one (as you probably know) and use odin to flash the rom. I hope this helps, feel free to ask about stuff you don't understand.
Note: If you can hear a sound when you plug your device into a computer, odin should still recognize your device.
coltoverson said:
Alright so get a rom from this page. You'll need to get an international one (as you probably know) and use odin to flash the rom. I hope this helps, feel free to ask about stuff you don't understand.
Note: If you can hear a sound when you plug your device into a computer, odin should still recognize your device.
Click to expand...
Click to collapse
None of the software is reading my device
Now im trying the ubuntu method but now im
Not able to past downloadingbscreen
Because ubuntu not mounting the device