i wan't 2 update my xperia e10i
all the member off xda say itzz imp 2 unloack bootloader to install custom rom...is dere some another way so that i can update my xperia e10i to 2.2 or 2.3....
without unlocking bootloader ..............
is dere some way so...plezz dev help me 2 get.........
delta001 said:
i wan't 2 update my xperia e10i
all the member off xda say itzz imp 2 unloack bootloader to install custom rom...is dere some another way so that i can update my xperia e10i to 2.2 or 2.3....
without unlocking bootloader ..............
is dere some way so...plezz dev help me 2 get.........
Click to expand...
Click to collapse
if you want 2.2, all the roms based on 2.2 will work on stock kernel, so you don't need to unlock the bootloader, just hope the download links still work.
If you want 2.3, go to the MiniCM7 thread, the last version to run on stock kernel is 2.0.7, which can still be downloaded from the dev's repository, there is a link in his first post where you can find it.
Any later versions are all based on a custom kernel, so you won't have any luck with those.
Good luck
can u give me the link for 2.2 n also for 2.3.....
& tell me all bugz r removed...........
thanxx for your support....
I posted similar questions the other day on here trying to update my x10 mini pro to 2.3 which I got resolved.
My post towards the bottom tells how I got my phone updated without having to unlock the bootloader and only took about 20 minutes and since installing that rom other roms that don't require an unlocked bootloader are simple to install now and take a matter of minutes to install through cwm recovery.
http://forum.xda-developers.com/showthread.php?t=1823973
dude that post is for pro not for mini......
if any dev have link so...plezz give it 2 me i wan't 2.3....full working in my xperia without any bugzz
thanxx 4 your support
Do you have your phone rooted and clockworkmod installed?
If not you will need that done.
Use super1click to root your phone http://forum.xda-developers.com/showthread.php?t=803682
Then install cwmrecovery for x10 mini http://forum.xda-developers.com/showthread.php?t=1513534
Then you should be able to install roms that don't require an unlocked bootloader using cwm recovery, booting into it by pressing the back key repeatedly when the white sony ericsson logo text comes up. You need to copy rom to your sd card and once in cwm recovery back up your current rom and then install a new rom.
bro.....i wan't 2.3......if dere any link for 2.3...with unlocking bootloader
plezz provide me
i would be thankfull 2 u....
delta001 said:
bro.....i wan't 2.3......if dere any link for 2.3...with unlocking bootloader
plezz provide me
i would be thankfull 2 u....
Click to expand...
Click to collapse
I
Is your phone rooted and do you have clockworkmod recovery installed?
If not you will have to root your phone and install clockworkmod recovery - I had some problems getting clockworkmod recovery installed on my 2.1 stock rom but the link I put in my previous post installed it without any problems.
Once rooted and clockworkmod recovery installed these roms will install through clockworkmod recovery without the need to unlock your bootloader
http://forum.xda-developers.com/showthread.php?t=1151499
http://forum.xda-developers.com/showthread.php?t=1333234
http://forum.xda-developers.com/showpost.php?p=16296323&postcount=1
http://forum.xda-developers.com/showpost.php?p=16802421&postcount=1
There will probably be a few more in the XPERIA X10 Mini Pro Android Development section too.
i think the rom has some bugzz like camera n reboot ...
can any1 help me here....
or provide me some other rom wch is bug free....
delta001 said:
i think the rom has some bugzz like camera n reboot ...
can any1 help me here....
or provide me some other rom wch is bug free....
Click to expand...
Click to collapse
This is the last version of MiniCM7 (GB 2.3.5) which will still run on stock kernel on the E10i.
There is not much else, but it's fairly bug-free as far as i can tell from personal experience.
I think you can do that by going on your Settings Menu.
can u explain ......
Related
Friends, I have rooted my device and have working xrecovery.. Now plz tell me how to install wolfs gingerbread into my device.... Plz provde me a complete guide.. Help plz.....
"I wanna install a custom rom bcoz official 2.3.3 is creating trouble for me... When i try to record video in HD it crashes and some time while playing games"
waqar_shah said:
Friends, I have rooted my device and have working xrecovery.. Now plz tell me how to install wolfs gingerbread into my device.... Plz provde me a complete guide.. Help plz.....
"I wanna install a custom rom bcoz official 2.3.3 is creating trouble for me... When i try to record video in HD it crashes and some time while playing games"
Click to expand...
Click to collapse
First Titanium backup its a important thing ^^
First question do you want to run it on a locked or unlocked bootloader?
if ya know that choose the desired kernel given on wolfs thread/ download
Maybe you need to flash custom wifi modules there added in the thread where the kernels are./ download
Choose wolfs rom and download
place rom and modules on sd card
Flash choosen kernel
rebboot into xrecovery
full wipe(factory reset)
wipe dalvik cache
install rom zip
install wifi modules zip
reboot
enter pin go thru setup
reboot to settle the rom
now maybe choos given modifications via appman
have fun wolfs rom is great and stable
maybe you want to download nofrills cpu control vie market to set cpu speed and couvernor
if you want to play highend games i tell you that the gaming rom with custom kernel (doomkernel) is great for this. played dead space for android on it with no lags
feel free to accidantly hit thank you button if i helped
greets darkmind
Thanks alot for replying... I have been reading all these steps on the forum but nobody is telling me how to?
What is locked bootloader and unlocked bootloader what is the difference?
waqar_shah said:
Thanks alot for replying... I have been reading all these steps on the forum but nobody is telling me how to?
What is locked bootloader and unlocked bootloader what is the difference?
Click to expand...
Click to collapse
seriusly i dont realy know myself but an unlocked provides more features in the custom kernel like doomlords kernel´s which you can be overclocked over 1200 mhz (depends on the Kernel) and the boot manager who lets you boot xrecovery and cwm.
How can i install a unlocked bootloader? i am using locked bootloader "Stock" wolf's gingerbread...
waqar_shah said:
How can i install a unlocked bootloader? i am using locked bootloader "Stock" wolf's gingerbread...
Click to expand...
Click to collapse
if you downloaded xda flashtool you just have to cklick plugin in flashtool than unlock. done ^^
Than you just have to flash and .ftf of an custom kernel. doomlords for example (link to doomlords kernels are in wolfs thread)
Hi all senior xda-developers XD
I'm new on Android.
I'm using SE Xperia Neo running GingerBread 2.3.4 build 4.0.2.A.0.62 with unlocked bootloader without root.
I try to installing Cyanogen 7 on my Neo but it always failed just reboot, reboot, reboot and reboot..
I have follow the wiki on the Cyanogen site when installing it, i try it 2 times and got the same result so i relock the BL and back to original stock firmware
Can someone tell me what's going wrong? or should i root it first before installing Cyanogen?
Have you flashed kernel with fast boot yes
Sent from my MT15i using xda premium
No, because i don't know how to flash kernel and it is not on the Cyanogen installation wiki.
So, i need to flash the kernel first?
drafha said:
No, because i don't know how to flash kernel and it is not on the Cyanogen installation wiki.
So, i need to flash the kernel first?
Click to expand...
Click to collapse
Here you go!Follow those step and you get cm7
So, "flash new kernel (always use the kernel provided in CM7 / it is incompatible with stock ROM)
ON PC - run fastboot flash boot boot.img (an black window will open and will stay open untill kernel is flashed)" this step is called flash kernel?
I've done it.. It said extract the CM7 packed and place the boot.img file on the same folder with Fastboot then run the command.
I just forgot whether i have wipe the data or not XD
Btw sorry for my english..
Anyway i read this:
" Hi all
Am a newbie in android things n just read here n there for info bout rooting
So i have a few things to clear out if some1 can help me sort out
1: Do i have to root my se neo if i wana put cm7 ?
2: Does rooting mean i can delete useless apps (not added ones nor dwnloaded ones) frm the firmware so that i can free rams in ma fone?
thx 4 reply
Hello
1.yes you need to root and unlock boot loader to use cm7
2.yes,after rooting using file manager like Root explorer you can delete unwanted apps aka bloatware"
So, if he true. I need to root my Neo first before installing CM7 on my Neo?
drafha said:
Anyway i read this:
" Hi all
Am a newbie in android things n just read here n there for info bout rooting
So i have a few things to clear out if some1 can help me sort out
1: Do i have to root my se neo if i wana put cm7 ?
2: Does rooting mean i can delete useless apps (not added ones nor dwnloaded ones) frm the firmware so that i can free rams in ma fone?
thx 4 reply
Hello
1.yes you need to root and unlock boot loader to use cm7
2.yes,after rooting using file manager like Root explorer you can delete unwanted apps aka bloatware"
So, if he true. I need to root my Neo first before installing CM7 on my Neo?
Click to expand...
Click to collapse
You need ONLY UNLOCK bootloader. Thats all.
taaviu said:
Here you go!Follow those step and you get cm7
Click to expand...
Click to collapse
If we disperse information in several threads we really are not helping others. Please post in existing threads, and read this before open a new thread. Thread closed.
HI evryone,
I am just a beginner using android for few months... My device is Xperia X10 Mini pro U20i..
I tried to upgrade to MIniCM9 3.0.1 from CM7 (CM7 was working wel, i just wanted to upgrade)..
I downloaded MiniCM9-3.0.1 [5/5/12]ICS 4.0.4/CM9 from http://forum.xda-developers.com/showthread.php?t=1636501
I wiped cache, user data and dalvik cache n tried to install CM9 rom.. It installed successfully, but I received a warning message. 'Should have kernel flashed to atleast ics-nAa 01' like dat...
But when i rebooted, it didnt go beyond d Sony Ericsson logo.. I went back to stock 2.1 using SEUS..
Then I rooted mobile using SuperOneClick 1.6.5 n rooted successfully. But wen i flashed the kernel 'U20_nAa-ics_01_2.6.29.6-nAa-ics-01.ftf' or 'U20_nAa-ics_01_2.6.29.6-nAa-ics-02.ftf' from http://forum.xda-developers.com/showthread.php?t=1636504, it couldnt flash.. I get an error ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"..
I tried flashing with flashtool 0.2.9.1 and with flashtool 0.7.1.0 but i couldnt get it done..
Can anyone help me with dis? Why do i receive dat error message? How can I upgrade to CM9??
While upgrading to CM7, I never flashed my device. I just rooted it, installed xrecovery n cleared factory data, disk cache, dalvik cache n installed d rom... So, is there any similar way to install CM9 also without using flashtool?
Thanks..
You need a custom kernel for MiniCM9, and the reason you can not flash this kernel is because your bootloader is locked. In the kernel thread there is a link to the tutorial on unlocking your bootloader, but please be careful, it doesn't work for everyone
Thanks for dat...
Is there a way we can install CM9 on U20i without unlocking bootloader?
Also, plz tell, does SEUS work after unlocking bootloader?
No you can't install MiniCM9 on anything other than the nAa-ICS kernel, and for that you need an unlocked bootloader
Yes, seus or pc companion will still work with an unlocked bootloader. the worst that can happen when unlocking the bootloader is that you will lose the ability to use your phone as a phone (disabled radio-capabilities). Check if it still works before flashing a kernel and custom rom, if it doesn't relock the bootloader and stay on stock kernel.
How to relock Bootloader? Link for U20i Stock Kernel..
Oh. Thanks a lot..
How to relock bootloader? I saw in a forum somewhere that there s no way to relock bootloader..
Also I tried to download the stock kernel for U20i from this page: http://forum.xda-developers.com/showthread.php?t=1254225... They have given the link for downloading the stock kernel as http://db.tt/ukt80PBn
But the link doesnt work. I have searched many times but could neither open it nor find alternative link.. Can u plz tell any alternative link for it?
Thanks so much for ur responses..
First of all, you can relock your bootloader using S1Tool (by pressing the restore button), but if it is succesfully unlocked there is no need to relock it at all, unless you need to take it back to the shop for repairs under warranty.
(I can't remember where i got the latest version of S1tool from, i'll search for it later if you need it)
as far as the stock kernel is concerned, just do a repair with pc companion or maybe seus, i usually use pc companion. it won't relock your bootloader but will install a fresh stock kernel and rom. After that you can root, install recovery or cwm whatever you used and restore the backup you hopefully made of your MiniCM7 rom.
Mind you: At this moment Minicm9 is not an upgrade yet in the sense that it will make your phone work better or easier, it's still very early in development and not that easy to get working well, if you need your phone on a day-to-day basis, stick with MiniCM7 for now.
Thanks a lot for that info..
I hav no complaints wid CM7. I just wanted to upgrade to ICS since it is out there.
I'll try unlocking bootloader n cm9. I'll go back to cm7 if it doesnt work or if it isnt suited for day-to-day operations..
Thanks so mch for ur help.. I ve understood a lot.. Thanx again.. :-D
If u find d link for S1tool, kindly post it..
Sent from my U20i using XDA
S1Tool with Restore button
Good luck, i hope everything works fine for you
I unlocked d bootloader, flashed n installed d MiniCM9 rom...
It works fine.. ICS is awesome..
Thank u 4 all ur help
Happy days then Have fun...
x10 mini pro 2.1 to Gingerbread (MiniCM7)
sjoedanny said:
I unlocked d bootloader, flashed n installed d MiniCM9 rom...
It works fine.. ICS is awesome..
Thank u 4 all ur help
Click to expand...
Click to collapse
hi
I was checking xda forum for upgrading my x10 mini pro to gingerbread version and I am really confused with the whole process. At present I rooted my phone with superone click and confused with next steps. do i need to unlock bootloader ? do i need to flash with Naa kernel ? Some guides instructing to install minicm7 without unlock bootloader and kernel flash.which correct or good ? I dont know what to do and I dont want to brick my phone too. Please help me and thank you very much for ur time
shane64 said:
hi
I was checking xda forum for upgrading my x10 mini pro to gingerbread version and I am really confused with the whole process. At present I rooted my phone with superone click and confused with next steps. do i need to unlock bootloader ? do i need to flash with Naa kernel ? Some guides instructing to install minicm7 without unlock bootloader and kernel flash.which correct or good ? I dont know what to do and I dont want to brick my phone too. Please help me and thank you very much for ur time
Click to expand...
Click to collapse
If you want to run MiniCM7, by nAa, you need to unlock your bootloader and flash the nAa GB kernel (currently at version 13).
If you want to run MiniCM7Pro, you can run it without a custom kernel and without unlocking your bootloader.
They are two different ROMS with almost the same name, i can understand why that can be a bit confusing
MiniCM7Pro
Thank you very much SmG67, for your fast and valuable reply. Am a newbie here and I am trying to learn the things.Your information is really cleared my fear about bricking. I have few doubts to share with you sir,
What is the main difference between minicm7 and minicm7pro ?
If I opt minicm7pro now, then Can I upgrade or install minicm9 later ?
Minicm7pro by Bpaul is not giving any instruction for how to install it. So where can I get the instructions
SmG67 said:
If you want to run MiniCM7, by nAa, you need to unlock your bootloader and flash the nAa GB kernel (currently at version 13).
If you want to run MiniCM7Pro, you can run it without a custom kernel and without unlocking your bootloader.
They are two different ROMS with almost the same name, i can understand why that can be a bit confusing
Click to expand...
Click to collapse
shane64 said:
Thank you very much SmG67, for your fast and valuable reply. Am a newbie here and I am trying to learn the things.Your information is really cleared my fear about bricking. I have few doubts to share with you sir,
What is the main difference between minicm7 and minicm7pro ?
If I opt minicm7pro now, then Can I upgrade or install minicm9 later ?
Minicm7pro by Bpaul is giving any instruction for how to install it. So where can I get the instructions
Click to expand...
Click to collapse
Minicm7Pro was a port to the x10mini-pro from early MiniCM7 for the x10-mini, but it got updated to the latest Gingerbread, while still working with the stock kernel, minicm7 was released later and moved to the nAa-custom kernel, which gave it some performance benefits.
If you can unlock your bootloader, you can flash any kernel and rom you like that is available for your phone, but MiniCM7Pro or ArcMini Nxt (which runs on just about any kernel) are good places to start anyway.
for installing MiniCM7Pro you need:
2.1.1.A.0.6 firmware with *4015 baseband (check Settings - About Phone, the baseband should end in 4015)
Rooted phone
ClockWorkMod Recovery
Copy the MiniCM7Pro zip to your sd-card
Boot into CWM (press back-button on the kernel-logo)
Do a backup
Install the ROM
Wipe factory-data/reset
Wipe Cache
Wipe Dalvik-Cache (in CWM advanced)
Wipe Batttery Stats (in CWM advanced)
Reboot and enjoy
MiniCM7Pro
Thank you very much, and I am now looking into how to install it on my device.Because minicm7pro thread is not giving any step by step instruction to install it. I am really appreciating your help. Good day
@ SmG67
Thank you very much for your advice's and I upgraded my x10 mini pro to android 2.3.7 ( cm7 pro) . I really appreciating your help on this regard. I was out of station for a while,and that's the reason for this late reply.My phone is working without any problem except wifi hotspot, It will show turning on and continue that status without actually turning it on when I am trying to enable it.Although its not a big headache or function for me.so its okay.Once agin thanks.Good day
MiniCM 7 pro to ICS
@ SmG67
hi... My x10 mini pro running on Minicm7 pro by paul and stock kernel.I installed it according to your advice and I appreciating your helping words. Now I would like to move to ICS rom and nAa kernel. I have few doubts regarding installation.
1. Do I need to go back to old 2.1 factory ROM before flashing ics and ics nAa kernel ?
2. If yes, How can I install old SE rom ?
3. Can I install MiniCm9 over JB nAa kernel ? because it will reduce my job when am moving to ics to JB rom
Thx
shane64 said:
@ SmG67
Thank you very much for your advice's and I upgraded my x10 mini pro to android 2.3.7 ( cm7 pro) . I really appreciating your help on this regard. I was out of station for a while,and that's the reason for this late reply.My phone is working without any problem except wifi hotspot, It will show turning on and continue that status without actually turning it on when I am trying to enable it.Although its not a big headache or function for me.so its okay.Once agin thanks.Good day
Click to expand...
Click to collapse
shane64 said:
@ SmG67
hi... My x10 mini pro running on Minicm7 pro by paul and stock kernel.I installed it according to your advice and I appreciating your helping words. Now I would like to move to ICS rom and nAa kernel. I have few doubts regarding installation.
1. Do I need to go back to old 2.1 factory ROM before flashing ics and ics nAa kernel ?
2. If yes, How can I install old SE rom ?
3. Can I install MiniCm9 over JB nAa kernel ? because it will reduce my job when am moving to ics to JB rom
Thx
Click to expand...
Click to collapse
1. No
2. 1 was a no, so no need for that
3. No, it won't work.
For 2011 devices line, be sure you are not in MTP mode
Thank you SmG67....I checked my device with s1tool and found " SEMC SIMLOCK CERTFICATE " then forwarded to flash tool. But I faced an issue and my flashing halted. When I am connecting my phone it will detect and showing INFO : For 2011 devices line, be sure you are not in MTP mode ....then going to charging mode....Dont know whats the reason ? :crying:
For your info : I installed all x10,x8,x10 mini pro ADB drivers, fastboot drivers, Flashmode drivers etc. USB debugging is ON, unknown sources is enable......my flashtool version was 0.6.8.0 .
SmG67 said:
1. No
2. 1 was a no, so no need for that
3. No, it won't work.
Click to expand...
Click to collapse
shane64 said:
Thank you SmG67....I checked my device with s1tool and found " SEMC SIMLOCK CERTFICATE " then forwarded to flash tool. But I faced an issue and my flashing halted. When I am connecting my phone it will detect and showing INFO : For 2011 devices line, be sure you are not in MTP mode ....then going to charging mode....Dont know whats the reason ? :crying:
For your info : I installed all x10,x8,x10 mini pro ADB drivers, fastboot drivers, Flashmode drivers etc. USB debugging is ON, unknown sources is enable......my flashtool version was 0.6.8.0 .
Click to expand...
Click to collapse
Our phone is 2010 device so don't worry about the mtp mode thingy
Your lfashing halted because you didn't unlock your bootloader yet.
Connect your phone to flashtool
Choose Únlock bootloader' in the plugins menu
Follow Instructions
Flash the kernel
You should be fine
Hey guys, I have a LWW and I am on stock .62 FW. I was wondering do I need to downgrade to install a custom ROM? I have unlocked the bootloader. Now the only prob is I cannot get root on .62 and I need CWM. Will installing a custom kernel also install CWM ?? Please guide me I am a new sony ericcson user..
Boss.bhavesh2 said:
Hey guys, I have a LWW and I am on stock .62 FW. I was wondering do I need to downgrade to install a custom ROM? I have unlocked the bootloader. Now the only prob is I cannot get root on .62 and I need CWM. Will installing a custom kernel also install CWM ?? Please guide me I am a new sony ericcson user..
Click to expand...
Click to collapse
so u have a unlocked bootloader!
then u must have flashtool to flash custom rom to ur phone... first select your desired rom then reply me i will say the process to install custom in detail..
sravan242 said:
so u have a unlocked bootloader!
then u must have flashtool to flash custom rom to ur phone... first select your desired rom then reply me i will say the process to install custom in detail..
Click to expand...
Click to collapse
Bro just tell me how can I get cwm on my device. That's the only thing I need.. I have all tools set up and you don't need to be noob friendly as I am an experienced user from the galaxy mini forums..
Boss.bhavesh2 said:
Bro just tell me how can I get cwm on my device. That's the only thing I need.. I have all tools set up and you don't need to be noob friendly as I am an experienced user from the galaxy mini forums..
Click to expand...
Click to collapse
so u just want cwm. so here is the LINK to download cwm.
just extract files and
1.Connect your device using usb data cable
2.Enable USB Debugging on device
3.install-cwm2.cmd for Xperia Mini / MiniPro / Active / Live With Walkman
4.Follow on screen instruction
but it requires root.
hey guys please some help
i wanted to install a custom rom
now im stuck
i did this
rooted via flastool
cwm5 via flash tool
i have 2.1 at the moment
after that to install the rom i was advice to install the kernel v6
i did
after that i install the recovery v6 for gb
i did
booted in recovery and installed the rom
myfirstrom.zip
and now im stuck
what can i do to fix this
thanks
Wrong thread buddy
Sent from my X10i using xda premium
elmanortega said:
hey guys please some help
i wanted to install a custom rom
now im stuck
i did this
rooted via flastool
cwm5 via flash tool
i have 2.1 at the moment
after that to install the rom i was advice to install the kernel v6
i did
after that i install the recovery v6 for gb
i did
booted in recovery and installed the rom
myfirstrom.zip
and now im stuck
what can i do to fix this
thanks
Click to expand...
Click to collapse
This tread should be in Q&A not in DEV.
Anyway do U have bootloader unlocked?
That rom is a 2.3 rom and you need to have and unlocked bootloader. You need to have 2.3 on your device first which would you would find in my signature below. So skip through the tread and find 2.3 Download it and flash it and try the rom again.
Sent from my X10i
Dude u r in 2.1 now. It has a baseband of .49 or .54. GB needs a baseband of .71. So the only option is first u download a pre-rooted firmware image and flash it via flashtool. U will boot into GB. Then unlock bootloader using Laser's method and install custom kernel like DoomKernel.
Follow this method
[RECOVERY image] {v2} X10 GB 3.0.1.G.0.75 [Prerooted + Fixed xRecovery] to insatll the prerooted firmware using flashtool.
Unlock bootloader using this steps from
[HOW-TO]UNLOCK bootloader for X10
Then flash DoomKernel from this link
[KERNEL][X10] DooMKernel [UNLOCKED BOOTLOADERS]{Rel:v06}[Dt:10/Jan][FW3.0.1.G.0.75] and boot up into stock rom or the previous GB rom u r using.
For Stock based roms, DoomKernel is simply the best.
For CM7 based roms, use FXP 130 kernel provided here FXP 130 and
For CM9 based roms, use FXP 132 kernel for better performance which u can download in FXP CM9 Thread.
---------- Post added at 11:10 AM ---------- Previous post was at 11:08 AM ----------
kingstonxl said:
This tread should be in Q&A not in DEV.
Anyway do U have bootloader unlocked?
Click to expand...
Click to collapse
He hasnt even updated to GB.. Still in stock 2.1.
Don't scare the guy with laser's method for now he is starting out small like we at one time were(im still growing) , the latest version of flashtools could do it easy. Its all in my signature if you tries it.
Sent from my X10i
brenty108 said:
Don't scare the guy with laser's method for now he is starting out small like we at one time were(im still growing) , the latest version of flashtools could do it easy. Its all in my signature if you tries it.
Sent from my X10i
Click to expand...
Click to collapse
Sry i didn kw ur post.. Let him do the way he think is best
thanks guys
im downloading the 2.1 ans 2.3 roms
now how do i install them?
i can access xrecovery
but when i connect to flashtool i dont have all the options
actually none
the devices is detected but thats it
can a stock rom be install using xrecovery?
elmanortega said:
thanks guys
im downloading the 2.1 ans 2.3 roms
now how do i install them?
i can access xrecovery
but when i connect to flashtool i dont have all the options
actually none
the devices is detected but thats it
can a stock rom be install using xrecovery?
Click to expand...
Click to collapse
dude flashing option works only when u r in download mode. i think u have 2.3.4. and stock kernel. if u want custom roms u have to unlock bootloader shown u n the post i provided
a2441918 said:
dude flashing option works only when u r in download mode. i think u have 2.3.4. and stock kernel. if u want custom roms u have to unlock bootloader shown u n the post i provided
Click to expand...
Click to collapse
thanks
Originally Posted by Androxyde
X10i Generic
Generic version 2.3.3 build 3.0.1.G.0.75 (MD5: 36F52BAA3556CDD7E56383614C01E5D6)
this one is no longer available
Thread Moved
You should Know better, your post count indicates you have been active, so should be fully aware of the rules
after i connect in flash mode
it stays for a few secs and reboots into the sse screen
is there a way to install the oem rom
in xrecovery?
or a 2.1 rom in recovery?
if i install a 2.1 custom rom
will that help??
im connected to flashtool in flash mode but nothing no options
what do i do now?
ok i finally go it to
where it was suppose to be to install formware
and this is where i am
Did you click fastboot? Click flashmode as x10 doesn't fastboot lol
Sent from my Xperia X10 using xda premium
thanks im good now
im about to install the ics rom
from
{rom}{6mp WORKING }XPERIA S ICS - CM9{14/8/12} {rom}
but i dont know wich kernel to install
i will write here what i did
so other can have an easy install
thanks to brenty108 for the help
If that rom is in ftf format
Open with 7zip or winrar
Look for kernel.sin
And place it in a folder
In flashtool create kernel
Point it to the folder containing kernel.sin
You should then be able to place your created kernel into firmware folder and flash it
I haven't had much experience with those roms so it's just a suggestion
Sent from my Xperia X10 using xda premium
elmanortega said:
thanks im good now
im about to install the ics rom
from
{rom}{6mp WORKING }XPERIA S ICS - CM9{14/8/12} {rom}
but i dont know wich kernel to install
i will write here what i did
so other can have an easy install
thanks to brenty108 for the help
Click to expand...
Click to collapse
You need to install a kernel called fxp132 from team fxp for ICS ROM to work... see my other posts in Q&A.. I have uploaded it somewhere.. you should be able to access through my profile->-> posts.
Sent from my Transformer TF101 using xda app-developers app
elmanortega said:
thanks im good now
im about to install the ics rom
from
{rom}{6mp WORKING }XPERIA S ICS - CM9{14/8/12} {rom}
but i dont know wich kernel to install
i will write here what i did
so other can have an easy install
thanks to brenty108 for the help
Click to expand...
Click to collapse
hey friend, you have downloaded the xperia s ics by vassishta but you dont know what kernel to be used?, dont be so lazy reading all the stuff in that thread (i mean xperia s ics), fxp 132 kernel is included there and instructions on how to flash the rom, hope i helped you, please press thanks button for me, pressing it is just an easy thing.. cheers.. :good: