Okay, here's the problem.
I have an EVO 3D
Hboot 1.50 S-On
HTC Dev method unlocked,
TWRP Recovery.
I'm currently runing a GB Rom, Warm Two Point Three, Its awesome, the best GB rom for me.
But its time to move on to ICS, the fact is that every time i try to flash an ICS Rom, I get in a Bootloop. It shows the boot animation, and it starts for like 4 seconds it shows the wallpaper and the notification bar, and it f*cking boots again and again.
I tried basic wipes, superwipes, modifiedsuperwipes.
I also tried to go back to stock 2.17 Rom, and walk it all along rooting and trying to flash an ICS Rom, but the RUU 2.17 failed every time, and it doesnt give a damn reason.
I even tried to update to Hboot 1.58, but didnt worked, in the bootloader, it detects the .zip file, and analize it, but it doesnt prompt for instalation, it just skip it and go to the normal bootloader screen.
I think its a problem just with this Evo, I flashed the ICSMeanROM to 3 Evos 3D, my wife, my brother, and a friend, and everyone worked very well.
So, im just able to flash my GB Warm two point three rom, and thats the only one that works i think.
Im not a total noob, i just have been a few moths out of the 3VO field.
Any ideas?
Thank you guys
ICS tends to bootloop for people who are s-on. Get s-off using the wire trick, flash an ICS custom ROM and your all set.
Save the Drama for your Mama with Tapatalk 2
coal686 said:
ICS tends to bootloop for people who are s-on. Get s-off using the wire trick, flash an ICS custom ROM and your all set.
Save the Drama for your Mama with Tapatalk 2
Click to expand...
Click to collapse
Okay, I think I dont have anywere else to run, I'm going to prepare my stuff.
Thank you dude
Just go to 100% stock, take the OTA and unlock it again.
When I chose to do S-off, it was the best thing to do. If you need any help let me know im sure i can find the links again for it
luis4ever said:
Just go to 100% stock, take the OTA and unlock it again.
Click to expand...
Click to collapse
I cant go stock, the RUU failed every time /:
Trafelgar said:
When I chose to do S-off, it was the best thing to do. If you need any help let me know im sure i can find the links again for it
Click to expand...
Click to collapse
Did you do it with an custom ROM or Stock? Im going to try it with a Custom due to the RUU not working at all, thanks btw
Damian8a said:
Okay, here's the problem.
I have an EVO 3D
Hboot 1.50 S-On
HTC Dev method unlocked,
TWRP Recovery.
I'm currently runing a GB Rom, Warm Two Point Three, Its awesome, the best GB rom for me.
But its time to move on to ICS, the fact is that every time i try to flash an ICS Rom, I get in a Bootloop. It shows the boot animation, and it starts for like 4 seconds it shows the wallpaper and the notification bar, and it f*cking boots again and again.
I tried basic wipes, superwipes, modifiedsuperwipes.
I also tried to go back to stock 2.17 Rom, and walk it all along rooting and trying to flash an ICS Rom, but the RUU 2.17 failed every time, and it doesnt give a damn reason.
I even tried to update to Hboot 1.58, but didnt worked, in the bootloader, it detects the .zip file, and analize it, but it doesnt prompt for instalation, it just skip it and go to the normal bootloader screen.
I think its a problem just with this Evo, I flashed the ICSMeanROM to 3 Evos 3D, my wife, my brother, and a friend, and everyone worked very well.
So, im just able to flash my GB Warm two point three rom, and thats the only one that works i think.
Im not a total noob, i just have been a few moths out of the 3VO field.
Any ideas?
Thank you guys
Click to expand...
Click to collapse
Try the following steps,
1. go to recovery > wipe & factory reset, wipe cache, wipe dalvik, go to mounts and storage, wipe system, data, cache, sd card... everything u can find there... wipe all..
2. in recovery DO NOT REBOOT, turn off phone
3. go to android development of evo 3d gsm, find a rom, for example mikrunny 1.06, open the archive extract the boot.img from the kernel folder.
4. assuming u have android sdk installed on ur computer, make a new folder and from the android sdk tools copy adb.exe, fastboot.exe, adbwinapi.dll (exact same files u used to unlock bootloader). also in this folder put that boot.img you extracted from the rom
5. put that folder in C:\
6. get back to phone , still DO NOT BOOT UP YET, and power up phone in bootloader mode (vol down & power) and go to fastboot
7. connect phone to pc in fastboot usb mode
8. open command prompt, type cd c:\"folder" ("folder" = folder u created with the sdk tools)
9. type in cmd: fastboot flash boot boot.img
10. after it's completed, go to recovery, still do not boot up phone
11. in recovery go to mounts and storage, usb storage and now copy the whole rom and nothing but the rom on the sd card
12. install zip from sdcard, select rom and let it install, it should boot up automatically
steps were given by SeptimiuB, I am just replying to your query because I've gone through the same mess and recovered as well.
Just be sure to unlock your bootloader and install a recovery before trying the above steps.
Cheers.
Related
i started i started running mik runny yesterday. I dont know if it was somethign with the rom but. I just updated my prl on dfs and once i went to reboot it wont go past the white htc screen and just keeps bootlooping. I cannot figure it out. Ive wiped everything muiltiple times. my nanadroids do the same thing. New roms too. I even did a factory reset. i dont get it My recovery and fastboot still work though. any other suggestions?
Flashed a new recovery img. i was using twrp2.0 i flashed twrp 1.3 to see if i had any luck with that but no dice. Im downloading the latest RUU now and hopefully that will fix it. Im guessing if it doesnt then something happened to my phone. If im not mistaken flashing the PG86IMG will flash allthe partitions so there would be no reason for it to not work unless of course something happened to the hardware?
Btw Hboot 1.4 and running mikrunny when the bootloop started. Im super confused since it booted fine for me numerous times. The only thing i changed before this reboot was prl and i turned fastboot off earlier. one other thing im downloading RUU_Shooter_S_Sprint_WWE_2.17.651.5 radio 1.00.1216 this isnt going to affect my hboot once flashing right? even if i have to re root thats fine i just dont wanna get stuck in 1.5 prison
Is your phone unlocked and s-off
Sent from my PG86100 using XDA App
jwolf1 said:
Is your phone unlocked and s-off
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
yea. i want to run one of the ruu but not sure which one to run in order to keep my hboot at 1.4 so i can re root.
It depends all on the update an ruin will
Tell u if there's a new. Version
Sent from my PG86100 using XDA App
mteezey said:
i started i started running mik runny yesterday. I dont know if it was somethign with the rom but. I just updated my prl on dfs and once i went to reboot it wont go past the white htc screen and just keeps bootlooping. I cannot figure it out. Ive wiped everything muiltiple times. my nanadroids do the same thing. New roms too. I even did a factory reset. i dont get it My recovery and fastboot still work though. any other suggestions?
Flashed a new recovery img. i was using twrp2.0 i flashed twrp 1.3 to see if i had any luck with that but no dice. Im downloading the latest RUU now and hopefully that will fix it. Im guessing if it doesnt then something happened to my phone. If im not mistaken flashing the PG86IMG will flash allthe partitions so there would be no reason for it to not work unless of course something happened to the hardware?
Btw Hboot 1.4 and running mikrunny when the bootloop started. Im super confused since it booted fine for me numerous times. The only thing i changed before this reboot was prl and i turned fastboot off earlier. one other thing im downloading RUU_Shooter_S_Sprint_WWE_2.17.651.5 radio 1.00.1216 this isnt going to affect my hboot once flashing right? even if i have to re root thats fine i just dont wanna get stuck in 1.5 prison
Click to expand...
Click to collapse
TWRP 2.0 has been giving dirty flashes. I had nothing but bad things with it along with other folks. I jumped back to CWM as recovery it has been stable and flashes smooth no dirty flashes.
reaper24 said:
TWRP 2.0 has been giving dirty flashes. I had nothing but bad things with it along with other folks. I jumped back to CWM as recovery it has been stable and flashes smooth no dirty flashes.
Click to expand...
Click to collapse
well im kinda stuck now. I tried to run the ruu for my hboot version and on step 11 system it failed to unzip. so now i have s off still but no recovery. Im gonna try to put cwm back on my sd and hope that it flashes and see if i can get some rom to flash. I cant figure this out i feel like a newb again. fml. Does it matter that it wasnt the first time i booted into the rom for it to be a bad flash like that?
well i think im officially bricked. I ran an older ruu and it failed to unzip system so after much searching i decided to run one of the latest pg86imgs it fully updated succesfully but still bootloops at the htc screen. So now i have a locked hboot 1.5 with s-off. I gotta get some sleep and see what i can do tommorow. from evreything i have read they say im not bricked if im able to do what i have. but i dont understand why nothing will work.
mteezey said:
well i think im officially bricked. I ran an older ruu and it failed to unzip system so after much searching i decided to run one of the latest pg86imgs it fully updated succesfully but still bootloops at the htc screen. So now i have a locked hboot 1.5 with s-off. I gotta get some sleep and see what i can do tommorow. from evreything i have read they say im not bricked if im able to do what i have. but i dont understand why nothing will work.
Click to expand...
Click to collapse
Sup man your not bricked don't worry or even soft bricked lol.
You should of waited on that updated zip reason it's boot loopin or lockin up is due to the phone never got wiped before the update....
Here is the CWM that will work for you. You need to put the img in your platform tools for ADB. Rename the img file to cwm then plug your phone in while in hboot. Type fastboot flash recovery cwm.img this will put the recovery back on your phone man.
In CWM you can mount your phone and copy a rom you downloaded off xda. Take the rom you downloaded open it up on your computer make a copy of the boot.img place that in your platform tools folder. Now mount your phone using CWM copy the romwhich will put it on your sd card. Now wipe everything. Then while in ADB type : adb reboot bootloader this will take you to hboot again now type fastboot flash boot boot.img this will flash the kernel for you. Now go back into recovery and flash your rom.
You should be good to go man. Let me know if you have any questions.
This should get your phone working...
The good thing about the 3vo is dat its unbrickable just always keep a Rom u ones work an always erase scrub thing / factory reset cutting shortcuts don't work in rooting/dev world
Sent from EPIC JWOLF1 using XDA App
reaper24 said:
Sup man your not bricked don't worry or even soft bricked lol.
You should of waited on that updated zip reason it's boot loopin or lockin up is due to the phone never got wiped before the update....
Here is the CWM that will work for you. You need to put the img in your platform tools for ADB. Rename the img file to cwm then plug your phone in while in hboot. Type fastboot flash recovery cwm.img this will put the recovery back on your phone man.
In CWM you can mount your phone and copy a rom you downloaded off xda. Take the rom you downloaded open it up on your computer make a copy of the boot.img place that in your platform tools folder. Now mount your phone using CWM copy the romwhich will put it on your sd card. Now wipe everything. Then while in ADB type : adb reboot bootloader this will take you to hboot again now type fastboot flash boot boot.img this will flash the kernel for you. Now go back into recovery and flash your rom.
You should be good to go man. Let me know if you have any questions.
This should get your phone working...
Click to expand...
Click to collapse
Ok so now that i ran that ruu that changed my hboot to 1.5 is that gonna affect how the cwm installs?even though it says s-off. Also for some reason im having trouble running any commands for fastboot. Ive followed a bunch of guides made sure the envinronemtal variables were correct ect, ect but none of the adb commands will work. Maybe its my pc idk.
Since i cant get fastboot to work on my pc do you think i would just be able to reinstall clockworkmod by renaming it on my sd like you do to root in the first place. Then use it to wipe and then try reflashing?
U might have to re unlock it if ur 3vo says locked at the top if not u should have no problem
Sent from my PG86100 using XDA App
I was able to re run the pg86img with the 1.4 hboot now im back on hboot 1.4 still with soff and doesnt say locked anymore. I also was able to install recovery again but i used twrp 1.3 since none of the download links i could find were good and the ones that were good were disk img. I tried running virus superwipe tool and reflashing a rom again to see if anyhtign changed but it didnt. i really just wish i could get the commands to work to use fastboot and adb.
One thing i just noticed in recovery i went into mounts and system and data were unmounted and cache and sdcard were mounted. Do i need to mount everything and try again or was that the way it should of been?
mteezey said:
Ok so now that i ran that ruu that changed my hboot to 1.5 is that gonna affect how the cwm installs?even though it says s-off. Also for some reason im having trouble running any commands for fastboot. Ive followed a bunch of guides made sure the envinronemtal variables were correct ect, ect but none of the adb commands will work. Maybe its my pc idk.
Since i cant get fastboot to work on my pc do you think i would just be able to reinstall clockworkmod by renaming it on my sd like you do to root in the first place. Then use it to wipe and then try reflashing?
Click to expand...
Click to collapse
I read about the 1.5 with s-off issue a while back when hboot 1.5 first was released. As long as you have s-off, it doesn't really matter what hboot you have. You'll be able to flash entire ROMs (kernel included) in one step just like you could before your issue arose, because you have s-off. I sadly don't have enough experience with fastboot to be able to give you an easy guide to flashing cwm onto your phone though, but I hope this helps you at least somewhat.
EDIT: I just realized everything I said now doesn't matter since you're not on hboot 1.5 anymore...sorry about that. reaper24 gave you a link to cwm 4.0.1.4 in post #8 in this thread. Stop using TWRP 1.3, there's already a TWRP 2 specifically for EVO 3D and even the latest TWRP has been having issues. CWM has been completely stable for me on every HTC phone I've ever used (Hero CDMA, EVO 4G and now currently the EVO 3D). CWM 4.0.1.4 is in post #8 of this thread as an attachment (it's a small link in between reaper's post and his signature)
w0rdOo said:
I read about the 1.5 with s-off issue a while back when hboot 1.5 first was released. As long as you have s-off, it doesn't really matter what hboot you have. You'll be able to flash entire ROMs (kernel included) in one step just like you could before your issue arose, because you have s-off. I sadly don't have enough experience with fastboot to be able to give you an easy guide to flashing cwm onto your phone though, but I hope this helps you at least somewhat.
EDIT: I just realized everything I said now doesn't matter since you're not on hboot 1.5 anymore...sorry about that. reaper24 gave you a link to cwm 4.0.1.4 in post #8 in this thread. Stop using TWRP 1.3, there's already a TWRP 2 specifically for EVO 3D and even the latest TWRP has been having issues. CWM has been completely stable for me on every HTC phone I've ever used (Hero CDMA, EVO 4G and now currently the EVO 3D). CWM 4.0.1.4 is in post #8 of this thread as an attachment (it's a small link in between reaper's post and his signature)
Click to expand...
Click to collapse
Cwm is the best so far no issues,
reaper24 said:
Cwm is the best so far no issues,
Click to expand...
Click to collapse
i have the clockwork mod from your link downloaded. That one i have to flash via cmd right? im having trouble getting any commands to work on either pc. However i did get qtadb to work on one of them im able to run all the same commands from the shell on it correct? nevermind on this i dont think this is made for that i may be wrong though.
If so i can flash recovery img then flash new rom boot img ect. .. i was told i have to do via pc in order to flash the boot partition cause thats whats causing my problem.
I have all the paths specified on my pc and everythign i need in my tools folder but cant cd to anyhting. i have read and read and read im pretty sure i have it all setup right but everytime i cd it says path not specified or not a batch file or soemthing.
mteezey said:
i have the clockwork mod from your link downloaded. That one i have to flash via cmd right? im having trouble getting any commands to work on either pc. However i did get qtadb to work on one of them im able to run all the same commands from the shell on it correct? nevermind on this i dont think this is made for that i may be wrong though.
If so i can flash recovery img then flash new rom boot img ect. .. i was told i have to do via pc in order to flash the boot partition cause thats whats causing my problem.
I have all the paths specified on my pc and everythign i need in my tools folder but cant cd to anyhting. i have read and read and read im pretty sure i have it all setup right but everytime i cd it says path not specified or not a batch file or soemthing.
Click to expand...
Click to collapse
If your on windows 7 just go to the folder platform tools hold down the shift key and right click on folder tell it to open a CMD prompt makes it easy.
reaper24 said:
If your on windows 7 just go to the folder platform tools hold down the shift key and right click on folder tell it to open a CMD prompt makes it easy.
Click to expand...
Click to collapse
fml lol. all this time. Now i gotta go back a couple post and re read what you said. Thanks i dont now why it wouldnt let me cd to the folder. it shows the same way i typed. Thanks alot hopefully i can get this now.
mteezey said:
fml lol. all this time. Now i gotta go back a couple post and re read what you said. Thanks i dont now why it wouldnt let me cd to the folder. it shows the same way i typed. Thanks alot hopefully i can get this now.
Click to expand...
Click to collapse
ok im so close yet so far. When trying to flash the recovery img it says
sending 'recovery
okay
writing recovery
failed(remote:not allowed)
i have twrp on here now is there anyway for me to wipe the boot partition and reflash that then my rom. sorry i know im asking questions i have read the answers to i have just read so much over the past 30-40 hours. actually cwm has a format boot option in it right?
mteezey said:
ok im so close yet so far. When trying to flash the recovery img it says
sending 'recovery
okay
writing recovery
failed(remote:not allowed)
i have twrp on here now is there anyway for me to wipe the boot partition and reflash that then my rom. sorry i know im asking questions i have read the answers to i have just read so much over the past 30-40 hours. actually cwm has a format boot option in it right?
Click to expand...
Click to collapse
Make sure the old recovery isn't still on the sd card like the recovery.img. Then try again. Your close man
reaper24 said:
Make sure the old recovery isn't still on the sd card like the recovery.img. Then try again. Your close man
Click to expand...
Click to collapse
i know right. I think what it might be is something i saw earlier about since i flashed the PG86IMG and it took revolutionary off my hboot that i no longer have fastboot. I tried to run some other commands and got the same thing. So for the hell of it i tried to run revolutionary from hbootand fastboot and it just waits for device. But then when i reboot the phone it will recognize it, but it doesnt stay long enough to run revolutionary.No i just have to remember which pg86img it was that made my phone just stay at the white screen so i can run revolutionary. lol
I rooted my rezound and wanted to update my rezound to ics os I followed the step exactly but when I rebooted I got stuck on the white screen. I took out the sd card and deleted the zip file and download the file again put the sd card back into the rezound but same thing. Now I can't get back to old 2.3.4 os i was using before because the post said do a wipe all data can someone help me with this to get my phone back to working order. I don't care if it is android 2.3.4 or ics 4.0 plase help.
I would first delete the PHzip file so you can start over.
Are you able to get into fastboot?
If so, check what mainver you are on with the following command:
fastboot getvar all
Also, check if you can get into recovery. Do you have Amon Ra on there? Did you make a nandroid before trying to flash ICS? If you made a nandroid and can get into recovery then restore that. If you didn't make one make a mental note to always make one before you flash ANYTHING on your phone.
If you can't restore, after you get your mainver, try to run RUU to get you back to stock. You need to relock the phone before running this.
Use the file from here that corresponds to your mainver:
http://www.filefactory.com/f/c2e320ee1d5c7886/
(Link from this thread http://forum.xda-developers.com/showthread.php?t=1338916)
If your mainver is 3.xx then you are up to ICS and will need to find a thread about getting back from that mainver to stock. I know I've seen one or two.
I had that same screen after flashing my first ROM, and in my case it was that it couldn't install the lower mainver in the ROM kernel (most are 1.x) since I was already on 2.x from the OTA. You probably need a different kernel to flash that has your version. Look in Rezound Android Development for a thread titled [KERNEL] Assorted stock kernels, then get the one you need based on what you learn from the previous reply and flash in recovery.
Sent from my ADR6425LVW using XDA App
spitzaf said:
I had that same screen after flashing my first ROM, and in my case it was that it couldn't install the lower mainver in the ROM kernel (most are 1.x) since I was already on 2.x from the OTA. You probably need a different kernel to flash that has your version. Look in Rezound Android Development for a thread titled [KERNEL] Assorted stock kernels, then get the one you need based on what you learn from the previous reply and flash in recovery.
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
This is the thread I believe:
http://forum.xda-developers.com/showthread.php?p=22076459
If just the kernel doesn't work, another thing you can try besides RUU is flashing a Stock OTA ROM. You can use con247's Stock OTA ROM instead of running the RUU.
http://forum.xda-developers.com/showthread.php?p=21880389
Here are the steps to take to accomplish that:
1) use Amon Ra to flash con's vigorStock OTA ROM. It will do its thing then reboot to hboot. I think it then asks you if you want to update. Don't do it yet.
2) At this point you want to relock. So go into fastboot on the phone. Using adb/fastboot type the following at the cmd prompt:
fastboot oem lock
3) Reboot phone and let it flash the PHzip file. It should reboot completely when it's finished.
4) delete the PHzip file using a file explorer app like ES File Explorer or Root Explorer.
5) get the phone back into fastboot. Unlock again using adb/fastboot. I don't remember the exact command but you can find that in the guide for unlocking.
6) reinstall su using Amon Ra.
Now you should be stock OTA rooted with the new goodies.
i can't even get into the command promt it scolls down really fast and closes. when i went to sdk manager all the 4.0.3 boxes were checked does that mean i hane ics 4.0.3?
Sorry yes i can get into fastboot iv'e tried everything i can search for. Am gonna try getting a different kernel for the 4.0.3 ics
Well i install a custom rom and kernel but before i installed i did a wipe and restore to factory and i wiped delvek and then sared the install of new kernel and custom rom. am i missing somgthing. If i were to try to back up android 2.3.4 from my girlfriend lg revolution would i be abould to exract only the android 2.3.4 and erase the lg and somehow get sense 3.5. I dont know am new to this. I rooted the phone fine with no prob and i thought that an update would be easy. I did have amon ra but now i cant locate it on my sd card. I even tried the PH98IMG.zip thing and that didnt work. I will try anything please help and dont give up on me. Oh and is there another way to get the command promt up.
Everything you need can be found in these Rezound forums.
So you can get into fastboot. That's good.
Do you still have your computer set up from when you unlocked the phone? If not, download the mini sdk that MrSmith317 made that I've attached and place that in the C: directory of your computer and name it something easy, mine is named android-flasher. Then just always keep it there as you will need to use it often when modding your phone.
1) get the sdk working on your computer
2) On your phone, do a battery pull, then boot it into fastboot and then connect it to your computer.
3) Type the following at your computer's cmd prompt:
fastboot getvar all
and find out what mainver you are on.
* If you are on a mainver that starts with 3.x then you cannot run the RUUs. I will try to find out what you should do in that case. If your mainver starts with 1.x or 2.x then continue onto step 4.
4) Relock your phone by typing the following:
fastboot oem lock
5) Download the RUU for your mainver to your computer. Use the file from here that corresponds to your mainver:
http://www.filefactory.com/f/c2e320ee1d5c7886/
This is an exe file so just run it on your pc with your phone attached. I know you need to be locked, I think you need HTC Sync installed, so if it's not working search for those answers, it will work, others have done it. Now you are back to stock.
5) Unlock your phone again using the same unlock bin file you got before by putting it in the same folder you are now using for sdk. Type the following command:
fastboot flash unlocktoken Unlock_code.bin
If you don't have it obtain a new one by following the same steps you did before to get it originally. Here is a guide for that:
http://forum.xda-developers.com/showpost.php?p=20780879&postcount=1
Now you should be stock and unlocked.
6) Flash Amon Ra in fastboot. Get the lateset version, 3.13. here:
http://www.mediafire.com/?chpoxzb8bl4nn2b
Type the following command to flash it:
fastboot flash recovery recovery-ra-vigor-3.13-gnm.img
Now you should have Amon Ra on your phone.
7) Root your phone by installing su using Amon Ra. Go to the developer menu and find the option in there.
Now you should be stock, unlocked and rooted.
8) MAKE A NANDROID BACK UP NOW AND LABEL IT.
9) Flash a new ROM.
*** If your mainver is 3.x try this thread to see if you can come up with a method to go back to stock. I haven't looked into this since I have not ventured into ICS land as of yet.
http://forum.xda-developers.com/showthread.php?t=1459347
There are also some threads about getting back to stock from ICS I think so here are my search results for "stock ics" in the thread title and you can probably find an answer in there somewhere.
Hope this helps you get back up and running.
OK nevermind I got it. I just download mik roms and the kernel right under ineffabilis rom and the link for the kernal is right under it. I had to do the steps twice but it work finally like at 430 in the morning. I turned off the computer and went to bed. The first thing I did when I woke up was check my phone and it was still working. Phone calls,text wifi pretty much all features are working. So i decided to write an update to let anybody know that if you have trouble fixing white htc screen dont worry it can be fixed. Am verying new to this and if I can fix this anyone can. I will check back on this post to see if any needs help. Thank you for the people who tried to help me in my post. Now I can be one of the people who help others now that I know who to root and fix the white sceen.
If you haven't done so, make a nandroid right now so you can always go back to that if anything gets messed up.
The "people" who tried to help you was me, so maybe you can hit my "thanks" button.
Just a detailed messages of What I did.
1) I erased any PH98IMG.zip or any other roms I download so the sdcard should have no roms,kernels or anything you downloaded to fix the white htc screen. What I did was use my girlfriend LG Revolution to insert my sdcard to erase any roms or whatever I tried to use to fix before.
2) put the sdcard back into the same phone and hold down the - volume and the power key to get to HBOOT screen. On this part I always did the battery pull but I left the back cover off up to you if you want to put it back on I guess it doesnt really matter and connect your phone to your computer.
3) Push the volume button down til you get to recovery and push the power button once to select recovery.
4) push the -volume til you get to USB-MS TOGGLE and push the power button once. Now go to USB-MS Toggle SDCard now your SDCard is read by your computer.
5) Now go to this website and dont read everything just use download link about half way down the web page. Ineffabilis V1.0 make sure to skip the ad first then the real download should pop up. Now click SAVEAS and when the files come up to choose where to save left click once to highlight your SDCard or removeable stroage and click save. Now do the same thing for the download right under Ineffabilis V1.0 named stock rooted kernel (flash in bootloader)
http://themikmik.com/showthread.php...-0-12-31-11-Sense-3-5-Beats-Tweaks-1-02-605-6
thank you so much guys from themikmik.com you saved my phone
6) After dowload is complete press power to disable USB-MS. Now push power once to return to recovery menu and disconnect your phone from the computer. Go down to wipe push power once to select. push power once on Wipe ALL data/factory reset and push power again to start the wipe. After that is done scoll down to Wipe Dalvik-cache after that is done go back to the recovery menu.
7) Now go to flash zip menu and push power once. Go to choose zip from sdcard now install the kernel and then the rom you downloaded.
9) once it is complete go to re boot system now and push the power button. and your done it will stay on the white screen for about 20 min and start up.
more info my s-on.
Just thought I would share this good luck.
bbarlow26 said:
OK nevermind I got it. I just download mik roms and the kernel right under ineffabilis rom and the link for the kernal is right under it. I had to do the steps twice but it work finally like at 430 in the morning. I turned off the computer and went to bed. The first thing I did when I woke up was check my phone and it was still working. Phone calls,text wifi pretty much all features are working. So i decided to write an update to let anybody know that if you have trouble fixing white htc screen dont worry it can be fixed. Am verying new to this and if I can fix this anyone can. I will check back on this post to see if any needs help. Thank you for the people who tried to help me in my post. Now I can be one of the people who help others now that I know who to root and fix the white sceen.
Click to expand...
Click to collapse
Also erase or rename the PH98IMG.zip file from the root directory of your SDCARD. It could save you some headaches in the future.
Alright, so I've got an S-On rooted Rezound and I'm stuck in the boot loop. YES I've read all the posts about logging in and dialing *#etc and also to go into Mobile Network and switch to LTE/CDMA, but I can't dial anything because the phone cuts off before I get a chance, and the LTE switch does nothing. I've tried flashing several different kernels, using the adb method and the PH98IMG methods, I've tried installing several different ROMS, I've done at least 10 different wipes/factory resets, I boot my phone without the cover, SIM card and without the SD card..and I'm still stuck in this boot loop. Someone please help a noob
---- EDIT WITH SOLUTION ----
Here's my "solution" to this issue. I'm sure it's located somewhere in these forums, but I couldn't find it so I imagine others can't either. Essentially, you're going to have to S-Off. Here's the solution:
I believe my recovery started acting funny after I failed to S-Off properly the first time. Amon Ra was all gimmicky and said stuff like "E: can't find cache" and reinstalling the recovery/wiping everything (and I mean everything: external SD, internal SD, cache, partioning SD card etc..) wasn't working. I tried re-installing Amon Ra through command prompt with the adb, I tried reinstalling my ROMS but my phone wasn't having it.
It got to the point all I could boot into was a white HTC screen, so I then tried out Twrp's 2.1 Touchscreen (I wasn't S-Off yet) recovery (I don't have enough posts to post a link yet ) which INITIALLY reported the same "E: can't find cache" errors as Amon Ra, BUT when I wiped my files in Twrp it seemed to actually fix them...I'm not sure exactly what I wiped or formatted that fixed the "E: can't find mount/cache" issues, so try everything.
So my ROM installed but I was still stuck on the white HTC logo. This is where I INSTALLED A NEW KERNEL THROUGH ADB. I wish I knew which kernel I installed, but I have like 10 and I just picked a random one. The point is if you're still stuck at a white HTC screen, install a new kernel.
So I got a recovery on the phone, and then I tried to S-Off again but I didn't have a good ROM installation so that was hanging at the HTC white screen. I then installed CleanROM DE 1.4 and I was able to boot into it, but ran into my initial problem of it crashing after dialing a number and entering infinite reboot. However, it would stay on just long enough for me to run ControlBear's program to S-Off.
So I S-Offed, I downloaded the Gingerbread RUU (the .exe version for Windows), I installed it, and now I can dial numbers and I'm all goodie again. Unfortunately, I honestly think the only way I was escaping my trouble was doing an S-Off, unless they leak a Ice Cream Sanwhich executable for Windows.
TL;DR Install Twerp 2.1 through adb, wipe everything, install CleanROM DE 1.4, install kernel S-Off, run Gingerbread RUU .exe
autotuneuser said:
Alright, so I've got an S-On rooted Rezound and I'm stuck in the boot loop. YES I've read all the posts about logging in and dialing *#etc and also to go into Mobile Network and switch to LTE/CDMA, but I can't dial anything because the phone cuts off before I get a chance, and the LTE switch does nothing. I've tried flashing several different kernels, using the adb method and the P87etc methods, I've tried installing several different ROMS, I've done at least 10 different wipes/factory resets, I boot my phone without the cover, SIM card and without the SD card..and I'm still stuck in this boot loop. Someone please help a noob
Click to expand...
Click to collapse
Have you tried running a RUU to put it back to factory like you just bought it?
I can't tell you how many times I've had to do that to fix stuff.
Magestic12 said:
Have you tried running a RUU to put it back to factory like you just bought it?
I can't tell you how many times I've had to do that to fix stuff.
Click to expand...
Click to collapse
I think I have downloaded the stock RUU..but just to be sure could you possibly link me to the correct one to run? Also I thought it was impossible to go back down from Ice Cream Sandwhich to Gingerbread?
autotuneuser said:
I think I have downloaded the stock RUU..but just to be sure could you possibly link me to the correct one to run? Also I thought it was impossible to go back down from Ice Cream Sandwhich to Gingerbread?
Click to expand...
Click to collapse
It is if you're s-on. Also, what did you mean by "P87etc," are you flashing the files properly?
autotuneuser said:
I think I have downloaded the stock RUU..but just to be sure could you possibly link me to the correct one to run? Also I thought it was impossible to go back down from Ice Cream Sandwhich to Gingerbread?
Click to expand...
Click to collapse
People say a lot of things are impossible, most have the virtue of never being tried.
This is the one I used to fix mine when I screwed up the partitions on my phone. I will warn you, the link in the thread takes you to another site & you have to sign up to download it. Its completely free & legit, but it won't let you download unless you register which is STUPID!
http://forum.xda-developers.com/showthread.php?p=25664508
Let me know if that helps
Oh & BTW I was & still am on the ICS leaks when I did this, so you'll be fine. You will lose everything on your phone though, because it wipes everything. But if you can't use it, that's not really an issue I guess.
tekhna said:
It is if you're s-on. Also, what did you mean by "P87etc," are you flashing the files properly?
Click to expand...
Click to collapse
The PH98IMG file. And I believe I'm flashing the properly..I do it twice; flashboot in adb, it tells me success, I then flash again right there, and then I reboot back to the bootloader and flash again so I do it 3 times in total.
I'm downloading the Vigor executable now. It's going to take a while but I'll report back with my results.
autotuneuser said:
The PH98IMG file. And I believe I'm flashing the properly..I do it twice; flashboot in adb, it tells me success, I then flash again right there, and then I reboot back to the bootloader and flash again so I do it 3 times in total.
I'm downloading the Vigor executable now. It's going to take a while but I'll report back with my results.
Click to expand...
Click to collapse
PH98IMG is not going to help you in this situation. You are going to have to download & run the RUU that I linked in the previous post. Trust me on this, not only have I already tried that before, I've blown my phone up enough times to know.
Magestic12 said:
PH98IMG is not going to help you in this situation. You are going to have to download & run the RUU that I linked in the previous post. Trust me on this, not only have I already tried that before, I've blown my phone up enough times to know.
Click to expand...
Click to collapse
Ok, I went to use the RUU and at first I got error 150, so I read somewhere I should lock my bootloader, so I relocked and now I get error 140, whcih is bootloader verision error. I think that's because I'm on ICS with S-On right? Is there any ICS RUU I can use to restore my phone? I downloaded Vigor_Stock_Doedexed_3.14.605.5 before but it still wasn't working for me.
autotuneuser said:
Ok, I went to use the RUU and at first I got error 150, so I read somewhere I should lock my bootloader, so I relocked and now I get error 140, whcih is bootloader verision error. I think that's because I'm on ICS with S-On right? Is there any ICS RUU I can use to restore my phone? I downloaded Vigor_Stock_Doedexed_3.14.605.5 before but it still wasn't working for me.
Click to expand...
Click to collapse
And as far as this goes yeah you can't use the .exe if your on ICS firmware with s-on and there are no available .exe's for ICS
Sent from my ADR6425LVW using Tapatalk 2
Unless you are already on the gingerbread build, and it sounds like your not, if you are s-on, it simply will not work. My suggestion is to download the latest leak and that should get you going. If it were me, and I aleady did it, download the latest leak here: http://android.thesmallprint.org/ICS.LEAK.3.14.605.5_PH98IMG.zip. Rename it PH98IMG.zip and put it on your external sd card. Should take less than 10 mins to download. Reboot into bootloader and let hboot install it. Make sure you are locked or relocked. After that is installed either delete or change the name of that file. Reboot into bootloader, unlock, and install either amon ra or tpwr and you can reinstall that rooted rom.
what he said
mikey's comments just previous are totally right, but after install, i would recommend
a factory reset, maybe even twice.
your bootloop problem should be cured then...
I was on the latest ICS firmware running an ICS ROM when I had to run the RUU I gave the link for & it worked fine for me.
Here's my suggestion & you can take it for what its worth.
I would download the latest HBoot & Radios & flash them.
Then if you can get into recovery, wipe everything, manually wipe the system, boot, etc. Then after that try running the RUU.
I just did this earlier in the week & it worked fine & my phone was all screwed up because the partitions were mounting to the wrong places & just all messed up.
I am by no means a dev or an expert, I'm just telling you what I did.
WHATEVER YOU CHOSE, YOU DO AT YOUR OWN RISK, but I don't see where you really have a choice.
Let me know if I can be of anymore help as I know what its like to have a phone that's freaking out on you. You can PM me or post here which ever you prefer. If after that we still can't get it fixed, we'll go find a dev to help us.
mikeyk101 said:
Unless you are already on the gingerbread build, and it sounds like your not, if you are s-on, it simply will not work. My suggestion is to download the latest leak and that should get you going. If it were me, and I aleady did it, download the latest leak here: . Rename it PH98IMG.zip and put it on your external sd card. Should take less than 10 mins to download. Reboot into bootloader and let hboot install it. Make sure you are locked or relocked. After that is installed either delete or change the name of that file. Reboot into bootloader, unlock, and install either amon ra or tpwr and you can reinstall that rooted rom.
Click to expand...
Click to collapse
Well now my recovery is saying it can't mount various things like "E: can't mount b dev/block/ blah blah"
And I tried flashing my ROM through Amon recovery but it's saying it can't open the file because it's (bad). I formatted the SD card and I'm still getting the issue. Any ideas?
Did you download the one from the link? You don't flash that PH98IMG.zip in recovery, you boot up into bootloader and let hboot find it. If when you get to your bootloader and it is fastboot, use your volume key and select on bootloader option. Then hboot will find it and ask you if you want to install it. Install it. After that, you will then need to reinstall either amon ra or the other but stay away from clockworkmod. But to reinstall the recovery, you will have to unlock again.
mikeyk101 said:
Did you download the one from the link? You don't flash that PH98IMG.zip in recovery, you boot up into bootloader and let hboot find it. If when you get to your bootloader and it is fastboot, use your volume key and select on bootloader option. Then hboot will find it and ask you if you want to install it. Install it. After that, you will then need to reinstall either amon ra or the other but stay away from clockworkmod. But to reinstall the recovery, you will have to unlock again.
Click to expand...
Click to collapse
I did install in hboot. I then installed Amon so I could flash the ROM and that's what's giving me all those errors.
If all you are after is stock and rooted, try looking at this one: http://forum.xda-developers.com/showthread.php?t=1642217
Since you ran the PH98IMG that I directed you to, you are now on ICS. So follow the directions in that thread for "S-On and ICS".
Installation for S-ON Devices on ICS firmware
•Copy ROM to SD Card AND PH98IMG.zip to ROOT of SD Card
•Reboot to recovery
•wipe data / Factory Reset
•Flash ROM
•Use Developer Menu to reboot to bootloader and flash the boot.img file in the PH98IMG.zip
•Reboot
•Profit!
Edit: The only change I would recommend is to hold off putting that PH98IMG file from that thread on the sd card right away. You will have a hard time getting to recovery if you have that on the card. I would suggest following all the instructions up to and including "Flash ROM". Then I would "return" back to the main Amon Ra screen, make sure you have the data cable connecting your phone to the computer, select "USB-MS Toggle", then select the SD Card, and that will allow you to copy the PH98IMG file to the SD card. Then continue with the rest of the directions. If you do this right, you should be ok.
mikeyk101 said:
If all you are after is stock and rooted, try looking at this one: http://forum.xda-developers.com/showthread.php?t=1642217
Since you ran the PH98IMG that I directed you to, you are now on ICS. So follow the directions in that thread for "S-On and ICS".
Installation for S-ON Devices on ICS firmware
•Copy ROM to SD Card AND PH98IMG.zip to ROOT of SD Card
•Reboot to recovery
•wipe data / Factory Reset
•Flash ROM
•Use Developer Menu to reboot to bootloader and flash the boot.img file in the PH98IMG.zip
•Reboot
•Profit!
Edit: The only change I would recommend is to hold off putting that PH98IMG file from that thread on the sd card right away. You will have a hard time getting to recovery if you have that on the card. I would suggest following all the instructions up to and including "Flash ROM". Then I would "return" back to the main Amon Ra screen, make sure you have the data cable connecting your phone to the computer, select "USB-MS Toggle", then select the Internal_sd, and that will allow you to copy the PH98IMG file to the SD card. Then continue with the rest of the directions. If you do this right, you should be ok.
Click to expand...
Click to collapse
It's the actual recover I believe to be giving me the errors, but I'll try what you said in about 2 days (I need to study for finals). It might be because I tried to S-Off and I installed all of that guys software and it might be making the phone act funny. I'll be much more descriptive about my errors when I post back in 2 days.
I fixed it!!
Ok, so I finally got it working, I'll try to detail my steps for anyone else who ran into similar issues:
I believe my recovery started acting funny after I failed to S-Off properly the first time. Amon Ra was all gimmicky and said stuff like "E: can't find cache" and reinstalling the recovery/wiping everything (and I mean everything: external SD, internal SD, cache, partioning SD card etc..) wasn't working. I tried re-installing Amon Ra through command prompt with the adb, I tried reinstalling my ROMS but my phone wasn't having it.
It got to the point all I could boot into was a white HTC screen, so I then tried out Twrp's 2.1 Touchscreen (I wasn't S-Off yet) recovery (I don't have enough posts to post a link yet ) which INITIALLY reported the same "E: can't find cache" errors as Amon Ra, BUT when I wiped my files in Twrp it seemed to actually fix them...I'm not sure exactly what I wiped or formatted that fixed the "E: can't find mount/cache" issues, so try everything.
So my ROM installed but I was still stuck on the white HTC logo. This is where I INSTALLED A NEW KERNEL THROUGH ADB. I wish I knew which kernel I installed, but I have like 10 and I just picked a random one. The point is if you're still stuck at a white HTC screen, install a new kernel.
So I got a recovery on the phone, and then I tried to S-Off again but I didn't have a good ROM installation so that was hanging at the HTC white screen. I then installed CleanROM DE 1.4 and I was able to boot into it, but ran into my initial problem of it crashing after dialing a number and entering infinite reboot. However, it would stay on just long enough for me to run ControlBear's program to S-Off.
So I S-Offed, I downloaded the Gingerbread RUU (the .exe version for Windows), I installed it, and now I can dial numbers and I'm all goodie again. Unfortunately, I honestly think the only way I was escaping my trouble was doing an S-Off, unless they leak a Ice Cream Sanwhich executable for Windows.
TL;DR Install Twerp 2.1 through adb, wipe everything, install CleanROM DE 1.4, install kernel S-Off, run Gingerbread RUU .exe
Hi everyone, so this is my first post here so please deal with me. I did check for similar problems with no results and think I'm posting in the right area. So try not to get too frustrated with me if I'm wrong. Anyway, with all of that out of the way on to my problem.
I have a rooted rezound, which was first rooted to get rid of bloatware and such, but I decided I wanted to try out some different roms. My problem is every time I flash a rom, which appears successful, but whenever it boots up it'll freeze up on the HTC screen. To fix this I've been just been pulling the battery and restoring to the backup I made before trying to flash roms. I would really like to try some different roms but I've gotten stuck on that screen with each one I've tried. If anyone could help me I'd greatly appreciate it!
Some additional info: I use to have a rooted thunderbolt and have some experience with flashing roms and all that stuff, but I'd still consider myself a noob. I have Amon Ra Recovery on my rezound and the screen in hboot reads:
***Unlocked***
vigor put ship s-on rl
HBOOT-2.11.0000
eMMC-boot
Oct 6 2011, 15:43:22
(I'm not sure why it says the incorrect date and time?)
I've tried several different things to successfully flash roms. I've tried flashing them with and without PH98IMG.zip on the root of my sd. I've tired it with and without the back on my phone. When flashing roms I ALWAYS wiped all data before flashing. That's just about everything relevant I can think of, sorry for the length! I figured the more information the easier for you guys to help!
If you're S-ON, you need to flash the P98IMG zip with the ROM. This contains the boot.img file.
Just extract the ROM of choice, take the P98IMG zip, throw it on your SD card and boot into your bootloader. Go into the bootloader menu and it'll install. Reboot, phone will work just fine.
If there isn't a P98IMG file and just a boot.img file, just push it through ADB while in your fastboot.
command is fastboot flash boot boot.img
So the P98IMG.zip file I downloaded and had on the root of my sd card is different than the one I need to extract from the rom or was I just not installing it right?
I did have a P98IMG.zip on the root of my sd card and I went into hboot, then I went to recovery and flashed my rom. Is there another step I need to take in installing the P98IMG.zip or should it automatically install? Do I need to reboot it between installing the P98IMG.zip and the rom?
Thanks for you help and quick response! I'm really trying to learn and get better at this stuff
After you flash your ROM, go into your bootloader (fully, must be in the bootloader menu) and it'll install. Follow the onscreen instructions, reboot, and remove the zip from your SD card.
Hope that helps.
I still cant get it to work :/
Heres step by step what I did:
1) Went into hboot > recovery
2) Wiped all data
3) Flashed ROM
4) Powered off phone using option in the recovery menu
5) Powered back on into hboot. The green text appeared that said loading and stuff about P98IMG and a blue bar on the side, but this process was very brief (maybe 2 seconds tops) and there were no instructions to follow
6) Went into recovery and rebooted my phone where I was stuck on the the HTC screen again
Can you point out where I'm going wrong or any possible issue?
Thanks again for you patience! I really appreciate your help!
ewy87 said:
I still cant get it to work :/
Heres step by step what I did:
1) Went into hboot > recovery
2) Wiped all data
3) Flashed ROM
4) Powered off phone using option in the recovery menu
5) Powered back on into hboot. The green text appeared that said loading and stuff about P98IMG and a blue bar on the side, but this process was very brief (maybe 2 seconds tops) and there were no instructions to follow
6) Went into recovery and rebooted my phone where I was stuck on the the HTC screen again
Can you point out where I'm going wrong or any possible issue?
Thanks again for you patience! I really appreciate your help!
Click to expand...
Click to collapse
How are you getting to recovery? It should give you an option to install update or reboot in hboot. If the ph98img is in the right spot you shouldn't be able to boot into recovery
With my phone powered off I'm holding down the power button and down volume button to get to hboot. I have my ROM and the PH98IMG.zip file both on the root of my SD card. It does very quickly appear to load the PH98IMG file but returns to the hboot screen the has the options: fastboot, recovery, factory reset, clear storage, sim lock, image crc.
Could it be that the PH98IMG file should be somewhere else? And was I doing everything in the correct order or do I install the PH98IMG first?
File may be bad. Do you have adb set up?
Sent from my ADR6425LVW using Tapatalk 2
Well actually I'm running off a mac and I've been using my sisters laptop for adb and that stuff but she just broke it...just my luck haha. Would I be able to download a different copy of PH98IMG from online and try that?
What ph file are you trying to flash? It should load it and ask if you want to update. Try downloading it again. May be a bad download
I'm trying to flash the Senseless-4.0.3-ICS-v1.0.0[2/4/2012] ROM (http://themikmik.com/showthread.php?11238-Senseless-4-0-3-ICS-v1-0-0-2-4-2012&p=178493#post178493) and I just saw a download for the PH98IMG file somewhere else on the website. Should the ROM include its own PH98IMG file? Thanks for both of your help! I have no experience with the PH files because my thunderbolt was s-off so i never dealt with this stuff before.
ewy87 said:
I'm trying to flash the Senseless-4.0.3-ICS-v1.0.0[2/4/2012] ROM (http://themikmik.com/showthread.php?11238-Senseless-4-0-3-ICS-v1-0-0-2-4-2012&p=178493#post178493) and I just saw a download for the PH98IMG file somewhere else on the website. Should the ROM include its own PH98IMG file? Thanks for both of your help! I have no experience with the PH files because my thunderbolt was s-off so i never dealt with this stuff before.
Click to expand...
Click to collapse
So s-off. Seriously though. You flashed a random ph file and thought it would work? It has to be the right one for the rom. Besides that rom isn't maintained anymore
The only method to get the rezound to s-off was using some wire trick and seemed like a difficult process. Would you recommend I do that?
And the post with the ROM said and ICS PH file would be fine, so I assumed it'd work. I guess I'll try a different ROM that includes a specific PH file and up to date. In which case I should be able to get everything to work with all the help from you and Chyrux. Thanks for everything!
ewy87 said:
The only method to get the rezound to s-off was using some wire trick and seemed like a difficult process. Would you recommend I do that?
And the post with the ROM said and ICS PH file would be fine, so I assumed it'd work. I guess I'll try a different ROM that includes a specific PH file and up to date. In which case I should be able to get everything to work with all the help from you and Chyrux. Thanks for everything!
Click to expand...
Click to collapse
I would recommend getting s-off. It's going to be the only method for this phone. I mean why waste another exploit to be patched? I would recommend con rom since it uses aroma to detect whether your s-on or s-off
Did you s-off your rezound? How were your experiences with it? I'm just worried about bricking my phone. But thanks for the ROM recommendation! I've been trying to find a good ROM
S-off was fairly easy, but you do need Windows or a Linux build.
I am a complete noob. Sprint Evo 3d 1.5 s-on, I have been running Viper IC3D for a month now, loving it,should have stuck with that. I wanted to try one of the Jelly Bean Roms, specifically the Team D.I.R.T. one, but I didn't want to have to keep flashing the two roms back and forth. Found out about Boot Manager Pro on here, and found a thread about using it with hboot 1.5 s-on. followed the instructions, booted into D.I.R.T. rom. fiddled with it, decided to go back to my phone rom. Boot Manager kept unexpectedly closing on me, wouldn't stay open long enough to do anything. So I went into recovery and restored my nandroid of Viper. But D.I.R.T. loaded! Said screw it, and wiped and reflashed Viper. D.I.R.T. loaded! Couldn't get anything but that ROM to load no matter what I did. Uninstalled Boot Manager, nothing but D.I.R.T.So I hunted around here and found a thread that said if all else failed, to manually remove Bootloader from sd and go from there. Did that, and it soft bricked my phone. I can get into recovery, but no matter what I do when I reboot it hangs in HTC white boot screen. I cannot afford another phone and don't get an upgrade til next year. Please Say there is a solution to this! I cried all last night, couldn't sleep, and I'm crying again. Side note, i accidentally erased half the C; Drive on my laptop trying things I found on another android forum,and system restore didn't work. So I'm back here, and I'm scared to try anything else, but I have to do something. Help!!!!!!
Flash the kernel. All will be well.
Viper rom should include boot.img.
Extract it to sdk-tools folder.
Open terminal, cd to sdk-tools directory.
Hold volume plus down on phone. Hit power button on fastboot option.
Plug in phone to computer. It should say fastboot usb on phone screen now. If not, install htc drivers.
Go to terminal. Type "fastboot flash boot boot.img
Should see some stuff happen on computer screen, phone will reboot.
Do that then report back.
Sent from my PG86100 using Tapatalk 2
can I do this using my rootevo3dnew package? I had a bad experience trying to install android sdk
You don't install sdk-tools. It's just a bunch if exe's in a folder.
That other thing you said, never heard of it.
Sent from my PG86100 using Tapatalk 2
Marta9227 said:
can I do this using my rootevo3dnew package? I had a bad experience trying to install android sdk
Click to expand...
Click to collapse
Yes you can, as long as you have fastboot and adb in there you'll be good, just put the boot.img in the same folder
Sent from my EVO 3DMA with a little "Common Sense"
please read my post carefully again and again it will solve your problem, I had the same problem
http://forum.xda-developers.com/showthread.php?t=1853065
I'm doomed. I was able to flash CWM this way, although it didn't help me at all. But I tried to flash the boot img and it didn't work. Didn't seem to recognize the command.
I'm cdma s-on? So basically you relocked and flashed an RUU and then relocked?
try to relock and flash with RUU it will work
At first when you were unable to boot back to phone rom, you should have went into recovery and flash the update.zip located in the sdcard/bootmanager/phonerom.
Anyway try to flash back to viperrom again then boot your recovery via fast boot since you are not s-off. And flash the update.zip from the phone rom folder. If everything fails just relock your bootloader and use the ruu.exe and you should be fine.
Marta9227 said:
I'm doomed. I was able to flash CWM this way, although it didn't help me at all. But I tried to flash the boot img and it didn't work. Didn't seem to recognize the command.
Click to expand...
Click to collapse
The command is: fastboot flash boot c:\(navigate to the sdk map with boot.img)\boot.img
For instance. for me it's c:\Users\(my name)\boot.img
Because i have my sdk and boot.img in my User map.
I believe boot manager creates the files for the second rom on the sd card. maybe thats why the D.I.R.T rom is loading.. My advice, try a different sdcard and see if the viper rom starts (you still might have to flash the boot.img via adb because of s-on)
I have no idea where the files for second rom are created so maybe if someone else could help out here. Then it should be a simple matter of deleting the second rom from the sd card and then go ahead and flash your viper rom.
http://init2winitapps.com/stories/BMManual.html
^^ this tell you all you need to know about dual booting.
Thanks to everyone! Relocked and ran RUU safely back to stock now debating if I have the guts to unlock again lol
Sent from my PG86100 using xda app-developers app
Do it!
Do it! The RUU will save you anyways lol
Should I do the stock ics ota first? I know that will make me hboot 1.58. Can I still HTC dev unlock 1.58? And can I get a new code? Didn't save the old one
Sent from my PG86100 using xda app-developers app
Yes you will have to get new code from htcdev. Though i wouldn't recommend updating hboot cause its known to cause some issues with some roms