Related
is there anyway to reasign power button to make maybe the home screen button to wake device???
Since the homescreen button is capacitive, I don't think it will work when the screen is off.
Send it back, not worth the trouble imo.
Sent from my ADR6400L using Tapatalk
Well I guess ill send back but from what ive been reading around here the power button has a few problems anyways with sinking in and just being cheap
Sent from my ADR6400L using XDA App
My button just sunk in last night after a few months of use. Got mine on release day and it just now stopped working.
Is there ANY way to power it on via ADB so I can pull a Nandroid backup?
Going to the VZW store today to see if they will replace it for me... I pray they do. I've got a few scuffs on the thing so they better not act like I dropped it. :|
you could always open up the TB and remove the plastic button, then just use a paperclip to turn it on and off.
sounds silly, but hey.. it'd work
Sigh...
Whenever I press my power button, I have to press it directly in the middle to get the screen to turn on. If I press the button towards the edge (left or right) the button just pushes down (becomes flush with the phone frame) and there is no click and the screen doesn't turn on. Not being picky, I just have to press the button more than 3-4 times and it feels loose.
Is anyone else's phone like this? Would help if someone could post a picture of the plastic tab underneath their power button. It feels like mine is broken.
I dunno about you but sometimes my power button won't even work. I have to take the case off, remove the battery, put it back in, then restart the phone to get it to work again. Kinda strange...
i was thinking i had the same issue earlier, then i just reseated the back and now all is well... now if i can get the rubberized black case from sprint i will be in full effect!
If you take the cover off, you will see that the button is a very small rubber and it lines up with the power button on the case, so you have to press it in the middle
So does this fix apply to power buttons that are really easily pressed too?
Sent from my PC36100 using XDA Premium App
devgrp said:
If you take the cover off, you will see that the button is a very small rubber and it lines up with the power button on the case, so you have to press it in the middle
Click to expand...
Click to collapse
I've actually taken the case off and pressed the button to see if the phone would turn on. Yeah no go. It's like it locked up or something.
My evo 3d has a super sensitive power button.. it does not click at all. If I hold my phone in a land scape i accidentally turn it off if i even rub my finger over it. The design of the power button is terrible
I am exchanging this phone tomorrow hopefully I wont have any further issues
Brandon_m25 said:
So does this fix apply to power buttons that are really easily pressed too?
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
I got a case off eBay that has the power button recessed...paid $6 Also managed to get a 32 GB SD Card for $21
My mom's is super sensitive too and is pressed when holding in landscape, also has no click. Should she take it back or has anyone opened the back and fixed it?
Sent from my PC36100 using XDA Premium App
Reason I really want to know is cause she got one and gave her ogevo to my sister and she misses her og. So I talked her into trading me her 3vo for my og.
Sent from my PC36100 using XDA Premium App
My power button was driving ne crazy. I couldn't get it to work consistently when trying to turn the screen off, and I would sometimes get the reboot/power off confirmation box while using the phone, like the button was somehow being held down.
I found that if I pulled the top left corner of the back from the fully locked position just slightly, the button worked much better.
By this afternoon, I was tired of repositioning the back every time I took the phone out of my pocket. I went to a Sprint store, and they tried a new back. That didn't solve the problem, so they swapped my device for a new one. Problem is 100% better now. Feels great now and works perfectly.
Sent from my PG86100 using Tapatalk
I had the same problem with mine. Got it home from just buying it and couldn't turn it back on. Thought the battery was dead so plugged it in and presto, it came on with a decent charge still on it. Then I couldn't turn it off or put it into sleep mode. Took it back to the store 1 hour after buying it. RS exchanged it immediately, so no issue there. The new one had a definite click to the power switch where the first one had no click at all. Working great so fa.
Cool, I'm gonna get her to take it back before we switch then. Thanks guys
Sent from my PC36100 using XDA Premium App
Mine is fine love how they redid it so no more broken or squeeky buttons smooth no issues love it .
ranger61878 said:
I got a case off eBay that has the power button recessed...paid $6 Also managed to get a 32 GB SD Card for $21
Click to expand...
Click to collapse
Could you point me in the right direction for that kind of case?
Sent from my Shooter
Has anyone noticed the power button being extra sensitive? That is to say, on the Hero/Evo, you had to hold the power button for at least 2 seconds before the pop-up Power Options menu would display. On my 3vo, it pops up in less than a second. I'm finding it slightly annoying, because the space between "sleep" and "power options menu" is too narrow.
Not mine....
dmcduck said:
Has anyone noticed the power button being extra sensitive? That is to say, on the Hero/Evo, you had to hold the power button for at least 2 seconds before the pop-up Power Options menu would display. On my 3vo, it pops up in less than a second. I'm finding it slightly annoying, because the space between "sleep" and "power options menu" is too narrow.
Click to expand...
Click to collapse
work on reseating the back shell of the phone, i had the issue too at first and i thought it was a defect, but i played with it a couple times and got it to work like a normal power button
Nope not at all, I actually have to press it more than once sometimes and harder the second time for it to work......
yea mine is a lil sensitive...cant have it my pocket because of it..pulled it out a couple times and the phone bouncing around in my pocket opened apps and almost called ppl
Throw an OtterBox on there....
you have to give it a little lovin- WON"T happen by accident.
Also - saved my3D from a nice 5 foot drop courtesy of some Crazy 3 yr olds on the 4th.
mine is like that and I hate it!!!
U guys have cases on the phone? I guess not
Sent from my PG86100 using XDA Premium App
I actually find the new power button a little bit better to my liking, a lot easier to find in a blind poweron. But I do agree that it might be a little too sensitive. I've found that the phone turns itself on while in my pocket - which is a bad thing because on shake the led flashlight turns on lol! Of course that kills the battery...
Also when trying to turn on or off... sometimes i see the turn off, reboot menu pop up which just simply put, never happened with the evo og. And while i like the ease of use and how fast it reacts to turning off/on, it seems to be a bit of a problem ATM
not not at all sensitive. it's actually under sensitive. some time i get frustrated because i have to push it so hard in the exact sweet spot just to get it to turn on. after having it for over a week now it's getting better, but at first i couldn't even get the thing turned on.
Not mine in fact mine is kinda hard to push. I'm going to the Sprint store I bought mine from this weekend to see if I can get it switched out because I have light leaking through the ring that surrounds the search key, and it bugs the hell out of me lol. So I hope my new one is gonna be normal.
This happens to me with or without the case. I did have a very brief time where the power button would not respond at all, and discovered that the back was causing it (I had swapped the OEM 8G card for my 32).
I don't think this is a big enough problem for me to try and swap the phone out, although it is a little annoying. I suppose in time I'll learn not to push the power button too long.
I have the same problem with the sensitive power button but I'm on a Samsung Galaxy S. I'm wondering if there is dust in the way... Anybody ever find a fix or diagnose the problem for this? I've seen the same problem across multiple devices on the forums so I am starting to believe its a wear and tear type of thing.
Mine is kinda sensitive. But not as sensitive as the one I saw at my local sprint store. Interesting how it seems like no two EVOS are the same.
Good thing though is that since the button is built into the backcover... Maybe picking up another one can deliver a more sensitive/stiff experience.
Sent from my PG86100 using XDA App
Is it just me or is the power button too flush to find and and too soft to press. I believe I will eventually get accustomed to its position which is a bit lower than on the GS2, but the rounded bezel and flushness seem to make it a bit hard to press sometimes. The volume rocker seems more click for some reason.
Sent from my badass Galaxy SIII.
Nobody?
Sent from my badass Galaxy SIII.
Think that's just u man. No problems with mine. Super sensitive
Sent from my GT-I9300 using xda app-developers app
It's just you, you'll adjust to it eventually.
I had pretty much the same issue. Maybe a little worse. My power button had no "click" whatsoever. It would often get stuck in when I pressed it to shut the screen off and would then cause my phone to reboot over and over until I noticed.
This happened way more often than I would expect from a £500 phone, so I called Vodafone and explained the issue. They sent a person to deliver a brand new phone the next day and the power button on this one is much, much better. So if you think you could swing it as faulty hardware, which mine clearly was, then I'd recommend getting it replaced.
Is your power button much flusher than the volume rocker? Mine seems so.
Sent from my badass Galaxy SIII.
I think it's just you.... ive played with over a dozen S3s and all the volume buttons are clickier than the power buttons.
I am having an issue with my top volume button, it seems a bit sticky.
My power mutton is crap also, no click at all. I have samsung's slim case ant it's very hard to press power button. I bought that phone only 4 days ago, so i don't want to send it to repair service, it takes usually about 2-4 weeks
jnr21 said:
My power mutton is crap also, no click at all. I have samsung's slim case ant it's very hard to press power button. I bought that phone only 4 days ago, so i don't want to send it to repair service, it takes usually about 2-4 weeks
Click to expand...
Click to collapse
You shouldn't need to send it away for warranty repair, the button seems faulty, I would get it replaced. I have similar issues with mine, the power button is spongy and creaks. I will receive a door to door replacement today. Don't sell yourself short mate
yh its too flush, some times i have to double check that if its working and ive pressed it. but i got used to it
my volume up button is very sticky, sometimes press and volume goes full blast when i dont want. kinda annoying, taken button out and cleaned but no difference . not sure if i should send back as im rooted :crying:
Crazy CS said:
I think it's just you.... ive played with over a dozen S3s and all the volume buttons are clickier than the power buttons.
I am having an issue with my top volume button, it seems a bit sticky.
Click to expand...
Click to collapse
The volume up button broke on mine after 4 days. It stopped springing back up after pressing it. Vodafone swapped my handset, and so far so good.
It is a little worrying to see others having similar issues with their buttons - I assumed mine was an isolated incident.
Everytime I go to use the on/of button for anything, I barely press it and sometimes it doesn't work, other times I quickly press it and it thinks I held it for the menu to come up to reboot or power down. But most of the time... It just reboots on its own if I use the switch. Any way to by pass it? The switch itself I think is just super sensitive, I barely have to even touch it. I've taken phone apart and cleaned around the switch. I'm trying to hold out till the Galaxy S 4 comes out... Hopefully soon!!
Sent from my SGH-I777 using xda app-developers app
Although I can't offer a fix... The galaxy s4 goes for preorder for at&t on the 16th of this month for $250 I believe. And T-Mobile is releasing it for $99 on may 1. I think that is all that is currently known about any galaxy s4 release dates. Hope I kinda helped in any roundabout way.
Galaxy S3 T999 rooted and flashed more than daily.
Brand new off contract nexus 4. 250 dollars. If you can deal with the limited internal sd card space and don't have to have your entire music collection with you at all times like some people here lol.
Free Apps to Help
I have the same issue, can't touch the power button. I smack the button a few times to get it to behave. I have installed the following two free apps so I do not have to touch the power button again.
Auto Screen On.
Button Savior(Root)
I am not allowed to post links to the apps, but they can both be found on Google Play.
You have to have root and you have to read the instructions for each app.:good:
Thanks to everyone, I am rooted and running CM9, so that shouldn't be an issue and I'll check into those apps. Just need to make til I can upgrade to the GS4. Thanks for the dates cuz now I have an idea of how long and I'll go order it that day. If that's the preorder, then when is the release date I wonder?
Sent from my SGH-I777 using xda app-developers app
I tried and am using "auto screen on" works prefect!! Using the proximity sensor instead of on off button. Thanks again guys, always seem to find help on XDA!
Sent from my SGH-I777 using xda app-developers app
I think it's absolutely fascinating how we both seemed to develop the problem at the same time. Could be that many others will soon suffer the same problem. Although I'm definitely going to look into those apps now, I found a temporary fix myself (and it could just be coincidental anyway). I pulled the battery out, pressed my power button repeatedly about 100 times, and now I'm able to use the power button again without it sticking and causing this problem.
The weird part is, that physically, the external button wasn't stuck at all. I could still click the button as many times as I wanted even while "stuck" symptoms appeared on my phone, like the power menu coming up, or a reboot. My guess is that the hardware problem lies somewhere between the physical button and the electronic circuitry within, but I haven't actually stripped down the phone and looked inside. But perhaps jamming the button a hundred times helped decrease the chance of the internal "signal relayer" getting stuck.
I had a similar issue with some keys on my laptop after a little kid played with it and got my keys messed up. Outside button was ok, something beyond that was not (so pressing "s" once would lead to 40 s's appearing on my document). Repeatedly pressing ended up helping out quite a lot.
Nonetheless, this may end up being a very useful thread for others later on.
My GF i777 was having the same issue reported here. I just sent it into mobiletechvideos.com and had the power button on the mother board replaced for 40-50 bucks and it works perfectly now. I would suggest using them if you want to keep your i777 working
bhatbhai said:
I think it's absolutely fascinating how we both seemed to develop the problem at the same time. Could be that many others will soon suffer the same problem. Although I'm definitely going to look into those apps now, I found a temporary fix myself (and it could just be coincidental anyway). I pulled the battery out, pressed my power button repeatedly about 100 times, and now I'm able to use the power button again without it sticking and causing this problem.
The weird part is, that physically, the external button wasn't stuck at all. I could still click the button as many times as I wanted even while "stuck" symptoms appeared on my phone, like the power menu coming up, or a reboot. My guess is that the hardware problem lies somewhere between the physical button and the electronic circuitry within, but I haven't actually stripped down the phone and looked inside. But perhaps jamming the button a hundred times helped decrease the chance of the internal "signal relayer" getting stuck.
I had a similar issue with some keys on my laptop after a little kid played with it and got my keys messed up. Outside button was ok, something beyond that was not (so pressing "s" once would lead to 40 s's appearing on my document). Repeatedly pressing ended up helping out quite a lot.
Nonetheless, this may end up being a very useful thread for others later on.
Click to expand...
Click to collapse
I am having this same problem. I started a different thread a few days ago about power button issues that at the time I attributed to the recent software update. But it was apparently just very coincidental, and after some tinkering I was able to get the button working using similar methods described in this thread already. After I got it working again, I rooted and successfully installed AOKP 4.2.2, but now when I manage to get the power button to send a signal it pulls up the shut down options screen and then restarts about ten seconds after that. I assume it is still the same hardware issue, but since the restarts only began occurring after flashing the custom rom I can't entirely rule out the possibility that it is some how related.
jmeas said:
I am having this same problem. I started a different thread a few days ago about power button issues that at the time I attributed to the recent software update. But it was apparently just very coincidental, and after some tinkering I was able to get the button working using similar methods described in this thread already. After I got it working again, I rooted and successfully installed AOKP 4.2.2, but now when I manage to get the power button to send a signal it pulls up the shut down options screen and then restarts about ten seconds after that. I assume it is still the same hardware issue, but since the restarts only began occurring after flashing the custom rom I can't entirely rule out the possibility that it is some how related.
Click to expand...
Click to collapse
If you flash back to stock and you still have the button problem, then it is almost certainly hardware. Did you do that yet?
I actually just flashed AOKP a few days ago. Instead of using one of the applications above, which either drained my battery (auto screen on) or wasn't entirely convenient (button savior), I've got a different set up.
In rom control, activate "volume rocker to wake." It's not a hundred percent, oddly, but it gets the job done. This will help with screen on.
For screen off and power menu, I added a navbar with the second smallest height (30 dpi?), with the power button on it. Now I permanently have a the ability to turn off my screen, from whatever I'm doing, with just one click. Long pressing it gets you the power menu.
As a side note, I added screenshot to the power menu so I wouldn't have to hold my power button for that either. But no, I haven't tried using the nav bar power button with volume down for screenshot, because I'm an idiot and just thought of that now.
Sent from my Nexus 10 using Tapatalk HD
creepyncrawly said:
If you flash back to stock and you still have the button problem, then it is almost certainly hardware. Did you do that yet?
Click to expand...
Click to collapse
I haven't had the opportunity to do that yet. The restart issues may have begun when I flashed the Siyah 4.3.3 kernel before installing the rom, but I probably won't have the chance to tinker with it until the weekend.
Edit: I have also noticed that I can only reliably use the volume buttons to wake my phone up from sleep when it is plugged in.
Weird, I just started getting this problem today, too. Kinda weird how this all happened to us in the same month
Add me to the list of those whose power button suddenly and mysteriously died. Opened up an email Sunday 4/14, the phone rebooted on its own, and when it restarted the power button no longer worked. My suspicious is it's somehow software/rom related. I'm running Task's AOKP 4.2.2 (4.1.13), for what its worth. If everyone with the issue posts their experience maybe we can figure out what's going on...
Mine started doing the same back in March. Pressing the power button would cause it to reboot and sometimes bring up the power menu, as if I was long pressing it. Then the power button didn't want to work at all, sometimes. I tried everything I could think of, even reverting back to stock, but the problem persisted. Then I finally found that pulling the battery and pressing the power button a few times fixed the problem, for a while anyways. If I don't do it every 2-3 days, it starts happening again. I've actually seen something similar happen with notebooks before. A charge manages to build in the motherboard and the system won't power on. Removing the power supply, pulling the battery, and holding the power button for 30 seconds to allow the charge to dissipate actually fixed the notebooks. That's where I got the idea to do it with my phone. Just wish I didn't have to do it every couple days.
My power button stopped working a couple of days ago and I tried this solution http://forum.xda-developers.com/showthread.php?t=1193057&page=2 post #17. Just take the phone apart, spray the power button with the electrical cleaner, and continuously pushing the button for a while (2 or 3 min). Keep the button wet while pushing it. Let it dry, put the phone back together, and start it back up. You should be able to tell whether it worked because when you put the battery back in it will not immediately start back up.