I flashed to stock rooted 198_7 from lokifishs dl page so I could use ubuntop. I am trying to connect my logitech bluetooth keyboard to my mopho. At first they connected and paired great but after disconnecting & trying to reconnect I keep getting a error saying my keyboard wants to pair but I have to initiate pairing from the phone which doesnt work. Why do I have to pair again after the two devices have sucsessfully paired and connectted? and why isnt there an option to forget the device and start all over? this is driving me nuts please someone help. I would loce to upload screenshot but cant?
Related
i have a BT-Q818 and one cool feature it has is that it goes on stand by mode once there is no connection. this is the case when i step out of the car. and whenever i start driving again, i seem to have had no pairing issue.
question is, is this FEATURE available on any BLUETOOTH HEADSET? reason being is that i only use my BT HEADSET when i drive and im getting tired with my current HS810 where its a hit and miss. sometimes it would pair and sometimes it would not.
thanks for any input guys.
Upon disconnection, the Nokia HS12-w displays "disconnected". Pressing the play button for a couple of seconds causes it to reconnect (I suspect to the last device it was connected with, but am not sure about that - I can test it if you like).
But even if you switch it off and back on, there is no need to pair again: it just starts searching for paired devices and connects with one of them (alas, no choice regarding what device it connects with, but it does seem to prefer Nokia devices over HTC ones).
The first connection it makes is as a headset (only calls are routed throught it, other sounds still come from the HTC). After pressing another button it also connect as an A2DP device and all sounds from the HTC are routed to it.
Jörg
Hey all,
I have been using my Eris with a bluetooth Stereo for a quite a while, but when I rooted the phone over to a 2.1 ROM it started using Simple Secure Pairing (SSP) when authenticating the bluetooth headphones. My car stereo doesn't support this (its brand new too...).
So, the question is has anyone ever looked into disabling SSP and forcing it to use the old static key method of pairing in 2.1?
I am not adverse to diving in and doing the dev work, I just wanted to make sure someone hasn't already done it. If I do need to dive in does anyone know if its possible to disable it via a config file, or will I need to backport the bluez stack?
Thanks for all the great work,
traetox
I too am having this issue. Worked fine in 1.5 but ever since root it will play audio through pioneer head unit but phone won't connect. I will patiently await a fix.
-------------------------------------
Sent via the XDA Tapatalk App
Oh, so that's what's up.
I'm having a similar problem with my Jabra Cruiser bluetooth speakerphone/FM transmitter. What mine does, though, is it will connect and I can use it to listen to music and do the normal speakerphone functions like it normally would, but none of the media buttons will work anymore. It's not a huge inconvenience, since I mount my phone in the car anyway (long commute). It's only a problem if I need to have Google Navigation in the foreground but still want to change songs.
Patiently waiting. You devs are awesome, if you don't get enough sycophantic slobbering already.
ok, so I did some digging on mine and it turns out that I can pair with a simple bluetooth headset via the '0000' key. But the phone attempts to go through the full key negotiation to connect the "bluetooth headphones." So i can get audio via the headset negotiated connection, but it sounds awful without full AD2P.
I am getting a ROM kitchen setup and will try and map the 1.5 bluez stack onto the 2.1 source and see where that gets me.
Thanks for the input.
Thanks for working on this! I've tried to incorporate some of the Bluetooth files as well as the WLAN.ko from other roms into my Rom but have been unsuccesful. I am running damage control 2.08 that I ported. I was originally unable to get WiFi or Bluetooth to work until I copied the WLAN.ko from the oc patch now both work minus the phone. Don't know if this helps but figured i let you know. If you have those files from a 1.5 Rom I will try them in my port and let you know what the results are.
-------------------------------------
Sent via the XDA Tapatalk App
bt issues as well any fix
I have posted several times on this can not get an answer Have the same issues anyone with experience know what I can do?
Here is my situation I have driod eris ee2.1 on verizon before root I could auto connect bt to my pioneer avic d3 with phone audio only I had to manually connect media audio every time but I got used to it but since root I now can connect to media audio only and when I try to connect phone audio it dissconnects in less than a minute I am at a loss as to what to do thought maybe someone has experienced this and figured it out Thanks in advance.
suppliesidejesus said:
Oh, so that's what's up.
I'm having a similar problem with my Jabra Cruiser bluetooth speakerphone/FM transmitter. What mine does, though, is it will connect and I can use it to listen to music and do the normal speakerphone functions like it normally would, but none of the media buttons will work anymore.
Click to expand...
Click to collapse
I have a Jabra Crusier, and I'm having an issue with a lot of ROMs where I can not connect to it and stream music over bluetooth. I have found that Aloysius v6 Maps rom by Spencer Moore works well with the bluetooth thing. You may have to connect and disconnect a few times here and there to get it to connect, but it's been the best ROM for it. I used V11 Maps and it worked for a little while, but stopped connecting properly just recently.
There are a few known bugs with v6, but I'm fiddling with V11 to try and get the bluetooth to stay perm. Once I get it, I'll let Spencer Moore know and get him any new updates I come across.
Just an update. I am able to pair and connect to phone using white widow Rom.
-------------------------------------
Sent via the XDA Tapatalk App
Tried connecting various devices to my rooted Photon via Bluetooth and ran into some issues...
-My Motorola S9 earphones pair up just fine (go figure, made by Motorola).
-Tried to connect to my desktop for OBEX and the phone is only being recognized as a Dial Up Network connection. There is no option given for OBEX.
-Tried to connect to my MS Wireless Entertainment Keyboard 7000 to use with the dock. The phone recognizes it and tries to pair with it, but it asks me to type a passcode to confirm the connection, can't input the code from the keyboard side, so the connection fails.
Anyone else having any issues with Bluetooth? I know my desktop supports OBEX and just about any other Bluetooth profile so I don't think the problem is with the computer. The same for the keyboard, since I use it with my computer with no issues. I'm pretty sure the issues are with the Bluetooth profiles on the Photon...
I have the 6000 keyboard and there is a bit of a dance you have to do in order to pair it with an Android device. I had figured this out from trying to pair it with my gtablet. When it asks for the passkey you need to type a 4 digit number on the phone and on the keyboard. The dance part is that you also have to hit enter on the keyboard right after you type the passkey on it and have hit the button on the phone. It will take you a couple of times to get the timing right but it will work. The first time I got it to work with my gtablet it took several minutes of messing with it to get it to pair.
Sent from my MB855 using XDA Premium App
Hey Everyone.
I was trying to pair a BT mouse (MS BT Notebook Mouse 5000) to the prime this morning to see if I could get it to work. In short, the pairing process hung after I entered the code. Now, I can't successfully unpair the mouse to try again. I click the device, click unpair, and nothing happens. I've tried it with the mouse on and off, having restarted BT on the prime, and having completely rebooted the prime.
Suggestions? Or am I stuck with a broken pair setup until I root and re-rom this thing?
Thanks in advance!!
update...
After about an hour or so, the BT info for the mouse disappeared. I was able to go ahead and add the mouse, so that's all well and good. However, I still have to wait a very long while to get a device to unpair. Does this happen to any other prime or ICS users?
Has anyone come across this before: my obd2ecu adapter keeps asking for a pin every time I connect. Once connected it's fine until I close the app but next time it asks again...... this used to work fine on my one x and my s2.
Any suggestions?
Thanks
My Galaxy Nexus is doing the same thing with my new Passat's Bluetooth connection.
I had to make my GN discoverable and initiate the pairing from the car, which I think might be part of the problem. When the phone isn't in the car, the car doesn't show up in the list of paired bluetooth devices, and when I start the car, it asks for the PIN twice and pairs... without me setting my phone discoverable.
Thoughts, anybody?
Rob
Mine is doing the same ???