Does anyone have the pit file for this phone? Need to repartition. Found it for the n7000 but not the i717. Thanks in advance.
Oh sure. Lots of people have it.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
If you go to samfirware.com you will see which Pit's go with each firmware, 512 is the most common, dont risk it...check!
I'm pretty sure they are available there as well...
and do not !!!...change the file names inside the tarballs....= instant brick...IMHO
And I did a little searching for you...see if this helps as well....g
http://forum.xda-developers.com/showthread.php?t=999097
ntellegence said:
Does anyone have the pit file for this phone? Need to repartition. Found it for the n7000 but not the i717. Thanks in advance.
Click to expand...
Click to collapse
Did you ever get this? I'm currently unable to mount my internal SD or move apps to it even though its practically empty. I think I need to re-partition and from what I've read the past few hours you need a PIT file to do it.
Need PIT file i717 AT&T
Please help guys!
Don't search in all internet resources, pit file 16Gb to Odin for my Samsung Galaxy Note 16Gb AT&T.Everybody search this file?Please give me to my e-mail ([email protected],[email protected])
Big thank you!!!
Sorry on my Engllish!)
Pit file is found with the stock firmware image.
Samfirmware.com will have what you need ...g
Not found
gregsarg said:
Pit file is found with the stock firmware image.
Samfirmware.com will have what you need ...g
Click to expand...
Click to collapse
I'm not found for AT&T model i717 : (Only firmware download & flashguide (not worked download,file deleted)
Please tell us the problems you are having.
You should be able to Odin push a stock firmware image to the device using Odin3, version 1.85.
This will correct your partition issue....g
Problem
gregsarg said:
Please tell us the problems you are having.
You should be able to Odin push a stock firmware image to the device using Odin3, version 1.85.
This will correct your partition issue....g
Click to expand...
Click to collapse
My memory devicee is a small, not 16GB and 3GB for using.
Thanks, I solved the problem by using the official program update KIES and pit file is not needed.
My mobile is worked!10,63Gb for using)))
Began to work better.
but do not give up on the presence of a pit file if anyone has it.([email protected])
____________________
(Google translator,sorry!)
As stated ....Odin and Kies will manage the partitions for you.
I'm glad you are up and going again ...g
i just DLed the lastest firmware from samfirmware and went through the Odin process BUT my phone is stuck at the white screen with the ATT world logo amd wont go anywhere.
any help would be greatly appreciated, thank you
Teufel Hunden said:
i just DLed the lastest firmware from samfirmware and went through the Odin process BUT my phone is stuck at the white screen with the ATT world logo amd wont go anywhere.
any help would be greatly appreciated, thank you
Click to expand...
Click to collapse
boot into stock recovery and do a factory reset, forgot what its called exactly but you get what i mean. its takes a while to boot and may even go through the boot cycle twice so give it some time.
dzee206 said:
boot into stock recovery and do a factory reset, forgot what its called exactly but you get what i mean. its takes a while to boot and may even go through the boot cycle twice so give it some time.
Click to expand...
Click to collapse
I'll give it a try
---------- Post added at 10:37 PM ---------- Previous post was at 10:20 PM ----------
dzee206 said:
boot into stock recovery and do a factory reset, forgot what its called exactly but you get what i mean. its takes a while to boot and may even go through the boot cycle twice so give it some time.
Click to expand...
Click to collapse
It worked ! thanks man?
Sorry guys for bump old thread, but did anyone already has the .pit file for this phone?
thanks
kendokar said:
Sorry guys for bump old thread, but did anyone already has the .pit file for this phone?
thanks
Click to expand...
Click to collapse
Same request. Didn't find any traces of it over the whole internet.
Here we go! Zipped original .pit file is in attachment. Pulled it out of my phone.
blazingcherub said:
Here we go! Zipped original .pit file is in attachment. Pulled it out of my phone.
Click to expand...
Click to collapse
Will this PIt file work on i717d ?
Related
Hey guys,
I just got my phone today and for some reason it doesnt work anymore.
I allready rooted it (one click) and loaded ROM manger. I tried to do that SD card thing on it whre you make room for App storage and when it rebooted it got stuck after the whole booting process. (The sound for the T-mobile ad seems to be a little to late) Black screen and lighted up sensor buttons (which stop glowing once I touch them, and then light up again). Tried everything. Odin sucessfully done, but still the same thing. Please dont tell me I got to give my brand new vibrant away. I get it in download mode and recovery mode.
Sorry for the bad english, I´m german and in america right now.
I deeply hope you guys can help me
Do you mean you tried to partition the SD card from ROM manager??
Check the repartition box with a checkmark..
Odin again, Odin again, and again, sometimes a success does not equal all files copied correctly.
Sent from my GT-I9000 using XDA App
jmcghee1973 said:
Do you mean you tried to partition the SD card from ROM manager??
Check the repartition box with a checkmark..
Click to expand...
Click to collapse
Thanks for the quich reply!
Yeah, thats what I did. Which box do you mean?
How can I figure out if odin did all files?
it will say success & reboot your phone automatically
jmcghee1973 said:
it will say success & reboot your phone automatically
Click to expand...
Click to collapse
That is what it did, and booted into a the same black screen as before. Anything else I can do?
Follow the instructions on the first post in this thread.
http://forum.xda-developers.com/showthread.php?t=745547
Why did you even want to partition your sdcard when you already had how many gigabytes for apps already?
Sent from my SGH-T959 using XDA Premium App
jaygajay said:
Follow the instructions on the first post in this thread.
http://forum.xda-developers.com/showthread.php?t=745547
Why did you even want to partition your sdcard when you already had how many gigabytes for apps already?
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
Thank you so much! You made me hope.
But the second link in the thread you gave seems to be uncompled. Or am I beeing really stupid?
I am a big noob, so I didnt know wha tthe partition was and jus wanted to give it a try-- big mistake. Never gonna do "just try it" again!
moskito_s said:
Thank you so much! You made me hope.
But the second link in the thread you gave seems to be uncompled. Or am I beeing really stupid?
I am a big noob, so I didnt know wha tthe partition was and jus wanted to give it a try-- big mistake. Never gonna do "just try it" again!
Click to expand...
Click to collapse
I see that Eugene has removed his ROM from that second link.
which odin version are you using?
jaygajay said:
I see that Eugene has removed his ROM from that second link.
which odin version are you using?
Click to expand...
Click to collapse
"odin3 v.1.00"
http://www.akaskriller.com/free/vibrantflashing1.php Will those files work?
moskito_s said:
"odin3 v.1.00"
http://www.akaskriller.com/free/vibrantflashing1.php Will those files work?
Click to expand...
Click to collapse
You could try it but i don't think or i don't know if anybody uses any of akaskrillers files.
or you could try this thread and start from #2.
http://forum.xda-developers.com/showthread.php?t=1047087
when you get to flashing the pit file choose the re-partition option in ODIN before starting the T959UVJFD.tar
jaygajay said:
You could try it but i don't think or i don't know if anybody uses any of akaskrillers files.
Click to expand...
Click to collapse
Could it mess it up even worse? I would rather not try stuff again Is there any way I can get eugens files?
"going back to stock" in my signature has a guide, and the files. PM me if you need help man.
jaygajay said:
or you could try this thread and start from #2.
http://forum.xda-developers.com/showthread.php?t=1047087
when you get to flashing the pit file choose the re-partition option in ODIN before starting the T959UVJFD.tar
Click to expand...
Click to collapse
I have tried this before. Rebooted and everthing but still the same error. Black screen...
s15274n said:
"going back to stock" in my signature has a guide, and the files. PM me if you need help man.
Click to expand...
Click to collapse
I really appreciate you help! I tried this and I having still the issue.
Pretty sure that guide would help, unfortunately are some files gone:
http://forum.xda-developers.com/showthread.php?t=745547
Any ideas because I liked my phone the 2 hourse I had it -.-
moskito_s said:
I really appreciate you help! I tried this and I having still the issue.
Pretty sure that guide would help, unfortunately are some files gone:
http://forum.xda-developers.com/showthread.php?t=745547
Any ideas because I liked my phone the 2 hourse I had it -.-
Click to expand...
Click to collapse
OKAY HERE GOES.
Download thisand extract it. And flash it in ODIN v1.7. No Pit file.
Your phone should boot into i9000 Froyo Rom.
Go back into download mode and Flash T959UVJFD.tar with the 512.pit that you downloaded in the previous threads.
To get into download mode use either "adb reboot download" or the button combo
Your phone should be saved. If not, then .....
jaygajay said:
OKAY HERE GOES.
Download thisand extract it. And flash it in ODIN v1.7. No Pit file.
Your phone should boot into i9000 Froyo Rom.
Go back into download mode and Flash T959UVJFD.tar with the 512.pit that you downloaded in the previous threads.
Your phone should be saved. If not, then .....
Click to expand...
Click to collapse
OH my God! I worked. I am so happy right now. God bless you and the XDA community! Close to tearse right now! You´re the man dude, you´re the man!
All of you guys rock!
Just make sure you odin back to stock T959UVJFD or else you may brick your phone if you try to flash anything over that i9000 ROM.
If it says model number sgh t959 I will be fine. Right?
Sent from my SGH-T959 using XDA App
Can't seem to find a link to download the stock rom for the US 5.0 Galaxy Player. I flashed a new rom thinking I did a CWM backup, but apparently I only thought I did.
I've searched around and can't seem to find an ODIN tar or a ZIP that I can flash for the US version other than a file hosted on Multiupload which no longer works. I didn't post in general being that this seems more Development related.
If anyone can help me out I'd appreciate it.
....................
EDIT: It was a pain to find, but I found the multiupload link, googled it, found the cached page, found the name of the file, googled the name of the file and downloaded from fileserve. I then uploaded to my server. You can download it from there if anyone needs it.
DOWNLOAD: http://timcordova.com/iamtimmah/android/YP-G70_UEKI8_MIN.rar
Found it. Posted mirror in first post.
Thank you for finding it. I would like to ask you if you have tried it already.
I don't flash custom ROMs because
until now, I didn't have a stock recovery ROM to restore in case something goes wrong or I didn't like the new ROM. And I don't think Best Buy would want to replace a device with a cracked screen if custom software is installed.
Please, let me know.
Thank you in advance.
Sent from my YP-G70
SirRhor said:
Thank you for finding it. I would like to ask you if you have tried it already.
I don't flash custom ROMs because
until now, I didn't have a stock recovery ROM to restore in case something goes wrong or I didn't like the new ROM. And I don't think Best Buy would want to replace a device with a cracked screen if custom software is installed.
Please, let me know.
Thank you in advance.
Sent from my YP-G70
Click to expand...
Click to collapse
I have tried it. I just flashed back to stock. I had to Wipe data via CWM before flashing back. On the first boot it took me to Stock recovery where I wiped data and wiped the cache. It's now working perfect.
As far as I know there seems to only be one custom rom for the US 5.0. Various kernels to try though.
So, in case I just want to restore to stock with the file you made available, I need to have a custom kernel so I can use CWM?, or I can do it from the stock recovery window?.
And the only two options to flash a kernel and a ROM I see for the SGP 5.0 are "Entropy's Daily Driver" and "Eryigit-GB-2.3.6 G70ZCKPA ROM", have you found other options?
Thank you.
@iamtimmah
do i need to flash the pit file or just the pda will do
and if the pit is needed then what are the flash instructions
akashsgpgi said:
@iamtimmah
do i need to flash the pit file or just the pda will do
and if the pit is needed then what are the flash instructions
Click to expand...
Click to collapse
The pit is included in the file.
i was asking whether we need to flash only pda file or both pda and pit files in odin
akashsgpgi said:
i was asking whether we need to flash only pda file or both pda and pit files in odin
Click to expand...
Click to collapse
Normally you only need to flash the pda, but if you want to re-partition your device then use the pit file as well.
RValentinF said:
Normally you only need to flash the pda, but if you want to re-partition your device then use the pit file as well.
Click to expand...
Click to collapse
ya i know that ..but if i flash the pit then how do i go back into download mode as we do not have removable battery
akashsgpgi said:
ya i know that ..but if i flash the pit then how do i go back into download mode as we do not have removable battery
Click to expand...
Click to collapse
When you turn it off just hold the volume down button before turning it on and you should get there in a couple of seconds.
after flashing i got bootloops, but i did factory reset and wipe partion cache , and it worked well
wow this rom is pre rooted
can some1 tell me the step by step procedure?
ken2kold said:
can some1 tell me the step by step procedure?
Click to expand...
Click to collapse
Welcome to the Dev section for the Galaxy Player. This is for development, not for installation help. You should be able to ask in General.
Flashing ROMs can be scary at first, but the Dev board is best left for software development, feedback, etc. It makes it easier for the Devs not to have to wade through a field of nonsense.
tl;dr:
Post questions in General, not in Dev. It's a common mistake, don't worry too much.
I just want it to be as if it just came in a box because I'm selling it, how do I have it stock and unrooted?
tradeJmark said:
I just want it to be as if it just came in a box because I'm selling it, how do I have it stock and unrooted?
Click to expand...
Click to collapse
Flash the stock rom found here via Odin3 and if it is rooted, download Root Browser from play store and and delete superuser.apk in system/app and delete su binary in system/bin and after you delete these two, reboot and uninstall root browser and you should be good.
Sent from my YP-G70 using xda app-developers app
I keep going into a bootloop and it wont shut off. What do i do?
Edit: I fixed it
What did you do to fix the bootloop?
Can someone please miror this? I get stuck on the download with greatly increasing time left. will greatly appreaciate it
nevermind i'll use gmillz's
Rom doesn't work.
Just as the Subject says. Only for knowledge purposes (though my phone is bricked :/ )
I get absolutely NO ERRORS while flashing ANY firmware for that matter through Odin. Though my phone is U.K Unbranded I9300XXBLG8.
It should boot-up but doesn't :/
Can't get into Recovery either. Not even a glimpse of it.
Stuck at the i9300 logo :/
Anyone care to help me and answer the following questions?
1. When is flashing a PIT File suitable? At what error u should do it?
2. Do I have a Bootloader/Recovery Problem or something?
3. Will J-Tagging help it?
4. Can someone tell me what is causing this problem? I haven't seen anyone with this problem yet. The firmware as well as CF Root flashes successfully (in Odin)... though the phone shows no positive results.
5. Should I go for PIT or J-Tagging or something else? I don't wanna risk it. All I know is that u should only flash a PIT file when u get the "Get PIT for Mapping" error. And J-Tagging is when the phone doesn't boots up. (I may be wrong)
Anyone with some suitable knowledge please drop by and help me.
Or someone who had this problem before.
My phone is a GT-i9300
CSC Version: I9300OXABLG8
Last Firmware was XXBLG8.
Pebble Blue non-branded and 16gb version.
THANK U
don't panic!
You should be able to fix it by just flashing a stock firmware with Odin
---------- Post added at 04:27 PM ---------- Previous post was at 04:25 PM ----------
you could also try removing the battery for a few minutes and then reinsert and try voting recovery again
Only go for a pit file, if you're planning to flash-lock the device, or repartition it, for that matter.
Don't panic, if your device is bricked, it's not, actually
You f***ed up your boot partition..
Goto sammobile.com/firmware, register, download latest U.K. firmware and then you should be good to go. Then you can root it and everything. DW about your SD, it'll stay as it is..
Hope I could help!
LG familyguy59/Beatsleigher
familyguy59 said:
Only go for a pit file, if you're planning to flash-lock the device, or repartition it, for that matter.
Don't panic, if your device is bricked, it's not, actually
You f***ed up your boot partition..
Goto sammobile.com/firmware, register, download latest U.K. firmware and then you should be good to go. Then you can root it and everything. DW about your SD, it'll stay as it is..
Hope I could help!
LG familyguy59/Beatsleigher
Click to expand...
Click to collapse
Yes I have a question about that. I'v been looking for the 3 part firmware. I couldn't find it there :/
I have flashed the exact same firmware u r telling.
Btw ur the only one who has said that doing the PIT file will not risk my S3 :/
AusafSal said:
Yes I have a question about that. I'v been looking for the 3 part firmware. I couldn't find it there :/
I have flashed the exact same firmware u r telling.
Btw ur the only one who has said that doing the PIT file will not risk my S3 :/
Click to expand...
Click to collapse
Lol. Why do you think that is?
CyanogenModded very skankily via XDA app. Skanky, indeed
AusafSal said:
Yes I have a question about that. I'v been looking for the 3 part firmware. I couldn't find it there :/
I have flashed the exact same firmware u r telling.
Btw ur the only one who has said that doing the PIT file will not risk my S3 :/
Click to expand...
Click to collapse
Flashing a pit is risky, and interruption could lead to hard brick, however if you do it right then all will be good, I used to flash with pit on the s1 regularly as it was a necessity coming from cm to gb, or something along those lines.
Just make sure you know what you are doing
PROGRESS!!!!!!!!!!
OK i think my phone is alive. I managed to get it into the CWM Recovery. But there seems to be one little problem. That I can't mount my SDCard. Even tried mounting in the "Mounts and Storage" Option. Im kinda hopeful but I don't know what to do now
Tried Factory/Data Resetting but that didn't do any good. Have i Effed my SDCard or something??? :/ :/
AusafSal said:
That I can't mount my SDCard.
Click to expand...
Click to collapse
any specific error messages about that in cwm?
Personally i used .pit with no issues. My story was that i changed the original partition layout and flashed stock .tar after that. CWM was functional but couldn't mount anything. So i just grabbed a .pit and flashed stock together with .pit - all fine.
And regarding the "interruptions" during .pit flashing - it was the same speed as flashing without .pit, at least for me.
If in your case it's simple filesystem corruption, connecting over adb and launching fsck on the messed up partitions should provide some results.
My nephew's S3 doesn't boot anymore (stuck at Sammy logo). I can still access recovery and download mode.
I tried to do a factory reset, but it crashes. Something about CSC missing.
I downloaded firmware from Sam firmware and tried to flash it manually via Odin, but that failed as well.
Any tips on what to do?
I just adder the .tar file in the PDA section, didn't alter any other check boxes and clicked start. As soon as it's writing the system, it says FAILED.
Sent from my GT-I9300 using xda app-developers app
Oh it's a I9300 btw, not an LTE version.
Sent from my GT-I9300 using xda app-developers app
make sure that kies isn't running in the background
and try flashing the correct pit file. if that fails, send it for a motherboard replacement
Glebun said:
make sure that kies isn't running in the background
and try flashing the correct pit file. if that fails, send it for a motherboard replacement
Click to expand...
Click to collapse
Where do I find the PIT file? I have tried flashing this firmware: I9300XXEMA2
on sammobile
Glebun said:
on sammobile
Click to expand...
Click to collapse
Sorry, I can only find this: http://www.sammobile.com/firmware/?page=8
The top one is the file I flashed, but it only has a .tar.md5 file. Nothing else in the zip (except a DLL file).
You can always google it
http://lmgtfy.com/?q=i9300+pit+file
Glebun said:
You can always google it
http://lmgtfy.com/?q=i9300+pit+file
Click to expand...
Click to collapse
I did, but it didn't help me.
I have contacted Samsung, but they say warranty doesn't apply in Belgium because the device is bought in England.
mvh_01 said:
I did, but it didn't help me.
Click to expand...
Click to collapse
What do you mean? you can get all the info about pit file you need from the link above
Hi xda-developers team.
I was updated the firmware from Odin when shut down the energy from my house and now my S3 show this message: "Firmware upgrade encountered n an issue. Please select recovery emergency in Kies & try again." ... But I do the same and Kies no recognize the phone.
What can I do/make to solve that issue?
Please, I need your help.
brato84 said:
Hi xda-developers team.
I was updated the firmware from Odin when shut down the energy from my house and now my S3 show this message: "Firmware upgrade encountered n an issue. Please select recovery emergency in Kies & try again." ... But I do the same and Kies no recognize the phone.
What can I do/make to solve that issue?
Please, I need your help.
Click to expand...
Click to collapse
tried to boot into download mode and reflash stock firmware via Odin?
another option would be, go into recovery (as far as you got CWM) and flash a rom over there.
Or read the Emergency Firmware Recovery thread .
Good evening,
I'm currently using a Samsung Galaxy S3 GT I9300 and my phone is stuck at the "Samsung Galaxy S3" logo and won't get into the lockscreen page of the phone. My custom binary downloads shows 6 times and I can't find a way to reset it without using TraingleAway. Help me?
Read and follow the guides, don't resurrect random threads that have no relation.
Sent from my GT-I9300 using Tapatalk
Samsung Galaxy S3 GT-I9300 Won't Boot. It Stuck at the Samsung SGS I9300 Logo
Hello All,
How are you all? I hate to do this to you all and i apologize profusely if it is a waste of your time. I have tried everything that i can think of but no joy so far.
I was on Android 4.3 when the phone went ape. It just happened out of the blue.
I can't do a factory reset through recovery mode. Also, i can't recover the firmware using Odin either. It failed every time with a write won't start error. I also tried to wipe the cache through recovery mode but it also failed.
I went through the threads looking for more info but getting frustrated with no fruitful outcome.
I tried a full firmware recovery using the below using Odin 3.04
Firmware downloaded from Sammobile.com
Model: GT-I9300
Model name: GALAXY S III
Country: Ireland (Meteor)
PDA: I9300XXUGNA5
Also tried the same (Full firmware recovery) through XDA but missing the PIT file from package.
Does anybody know how to fix this once and for all?
I can't do it through recovery mode as nothing works in there. My only option would be the download mode using Odin
I need all files (PIT, PDA, PHONE and CSC)
Does anybody have a link for a working full package that i can download for Ireland (Meteor, eMobile)
I would be much obliged to you all and thank you so much for your time and patience in advance.
Have you tried on samfirmware.com? It is fairly easy...
sjose said:
Hello All,
How are you all? I hate to do this to you all and i apologize profusely if it is a waste of your time. I have tried everything that i can think of but no joy so far.
I was on Android 4.3 when the phone went ape. It just happened out of the blue.
I can't do a factory reset through recovery mode. Also, i can't recover the firmware using Odin either. It failed every time with a write won't start error. I also tried to wipe the cache through recovery mode but it also failed.
I went through the threads looking for more info but getting frustrated with no fruitful outcome.
I tried a full firmware recovery using the below using Odin 3.04
Firmware downloaded from Sammobile.com
Model: GT-I9300
Model name: GALAXY S III
Country: Ireland (Meteor)
PDA: I9300XXUGNA5
Also tried the same (Full firmware recovery) through XDA but missing the PIT file from package.
Does anybody know how to fix this once and for all?
I can't do it through recovery mode as nothing works in there. My only option would be the download mode using Odin
I need all files (PIT, PDA, PHONE and CSC)
Does anybody have a link for a working full package that i can download for Ireland (Meteor, eMobile)
I would be much obliged to you all and thank you so much for your time and patience in advance.
Click to expand...
Click to collapse
Here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << follow instructions exactly
tallman43 said:
Here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << follow instructions exactly
Click to expand...
Click to collapse
Hey ya,
Thanks a million for getting back. That's exactly what i tried first. I didn't have the PIT file though.
Where do you get the PIT file from?
sjose said:
Hey ya,
Thanks a million for getting back. That's exactly what i tried first. I didn't have the PIT file though.
Where do you get the PIT file from?
Click to expand...
Click to collapse
Its in the 4.1.2 zip you need to extract it if not there are some floating about the forum
tallman43 said:
Its in the 4.1.2 zip you need to extract it if not there are some floating about the forum
Click to expand...
Click to collapse
Thanks again. Instructions! I guess the pic attached would be it, right? I don't know how many times that i downloaded the zip file. It isn't there. I will have another look through the forum to find the PIT file on its own but no joy yet.
Thanks again
---------- Post added at 02:42 PM ---------- Previous post was at 02:26 PM ----------
sjose said:
Thanks again. Instructions! I guess the pic attached would be it, right? I don't know how many times that i downloaded the zip file. It isn't there. I will have another look through the forum to find the PIT file on its own but no joy yet.
Thanks again
Click to expand...
Click to collapse
Downloaded to my S4 and it worked. Now i got the PIT file but still no joy flashing it. Followed the instruction to the tea but no luck. I don't know what else i can try.
Would it matter what version was i on before? I had 4.3 but i am trying to flash 4.1! I guess it wouldn't matter because the phone won't even boot up.
---------- Post added at 02:59 PM ---------- Previous post was at 02:42 PM ----------
sjose said:
Thanks again. Instructions! I guess the pic attached would be it, right? I don't know how many times that i downloaded the zip file. It isn't there. I will have another look through the forum to find the PIT file on its own but no joy yet.
Thanks again
---------- Post added at 02:42 PM ---------- Previous post was at 02:26 PM ----------
Downloaded to my S4 and it worked. Now i got the PIT file but still no joy flashing it. Followed the instruction to the tea but no luck. I don't know what else i can try.
Would it matter what version was i on before? I had 4.3 but i am trying to flash 4.1! I guess it wouldn't matter because the phone won't even boot up.
Click to expand...
Click to collapse
Guys
Has anybody got an error on Odin (3.4) saying re-partition operation failed when trying to recover the firmware to factory settings?
I tried using 4.3 and 4.1.2 but none works and got the same error message both times.