The phone was working great, other than the noise cancelling mic cancelling out my voice, but I thought since the update was available, I might as well do it. Once I got on ICS I was having quite a few issues: overall slower, delay in the screen turning on, hotter battery, longer time to charge, wallpaper would flash on before the HTC screen when booting up, there were more just can't remember right now.
I hear about the Global update and think it may fix some of the problems I was having, but they got worse. Now I still have everything I did before (except maybe the hot battery) Also have 3 new issues now: the screen doesn't come back on when I take it away from my ear during a call, browser goes white when going to a new page and I have to reload the page, can't post on any forums in the browser.
Here's the process I went through getting the Global (copied from another forum that I was updating as I was going)
I downloaded it from android police, got to step 6 of the directions, looked away from the phone to see what step 7 was. The phone vibrated and is now on the screen with the green down arrow and 2 in a circle around it. Says "Updating Software from Verizon Wireless" with a green progress bar. Hope I did it right.
That went through rebooted to HBOOT, pressed vol. up twice. It checked everything. Rebooted. Pressed. Vol. up to install. Upadated everything. Pressed power to reboot.
Took a little while on the white HTC screen, now says "Andoid is upgrading..." "Optimizing application [some number] of 77." I think I did it right.
Just checked and everything is right. Woo-Hoo! Not that I'll ever use global, I was hoping it may have fixed some of the bugs I was having, but no
Also of note, I didn't pull the battery. My case is hard to get off, so I just turned off fast boot and that worked.
Click to expand...
Click to collapse
What do I do at this point? My phone is getting less usable by the day as I keep noticing all these bugs.
Wipe your phone clean and use the RUU that android police posted today to install the latest patched OTA clean. That's what I'd try anyway.
I'll try that in the morning, thanks. Hopefully all goes smoothly. Still learning how to do things (afraid of rooting, but that's another thread)
VooDooCC said:
I'll try that in the morning, thanks. Hopefully all goes smoothly. Still learning how to do things (afraid of rooting, but that's another thread)
Click to expand...
Click to collapse
There are plenty of knowledgeable members here to walk you through it if you just shoot someone a pm. It's all very simple.
As for your problem, try the ruu hopefully that works I'm not sure about the mic canceling out your voice that might be a hardware problem let's hope not
Sent from my ADR6425LVW using xda app-developers app
Stupid person time (I don't believe there are stupid questions)
By "wipe phone clean" then flash the RUU. I get the flashing part, but what do you mean by wipe clean. Is there another step in there or does it automatically happen when flashing? I've only been in recovery once, so I didn't really study the options. On my D2, there was a wipe option.
VooDooCC said:
Stupid person time (I don't believe there are stupid questions)
By "wipe phone clean" then flash the RUU. I get the flashing part, but what do you mean by wipe clean. Is there another step in there or does it automatically happen when flashing? I've only been in recovery once, so I didn't really study the options. On my D2, there was a wipe option.
Click to expand...
Click to collapse
The RUU should wipe it but you can go into recovery and wipe /data and /system to remove the current rom.
Making sure I got all this right, but won't be trying until tomorrow afternoon. Only at 40% charge and going out of town in the morning and need the phone.
1. Rename the Android Police download to PH98IMG.zip and copy to sd card (don't have to extract anything out like I did on the .1)
2. Boot into recovery (vol. down and power)
3. Let it start flashing (If it starts automatically, how do I get to the wipe /data and /cache options?) I know it should be wiped auto. but I want to do it myself to make sure.
4. Pray to Andy that there's no bugs this time.
You need to boot into bootloader, not recovery, that will happen when you do the battery pull then start it volume down + power. I'm pretty sure the RUU will wipe everything so you should be good.
Problem with newest ICS
The new ICS has a problem with the browser. Links are squirrelly when touched; sometimes
no reaction, sometimes checks every box on the page. Just does not feel right when moving
around on web pages.
Seems ok to me, I'd recommend Chrome over stock unless you need Flash support anyway.
Sorry, I got the terms confused on the terms. I knew it was vol. down and power though
I finally got around to flashing the RUU, all is well so far, will report back if anything changes.
I'm s-off but my bootloader is unlocked. Do I need to relock the bootloader before flashing the RUU.
Sent from my ADR6425LVW using xda app-developers app
There is a tradition on rezounds to always install an RUU two times in a row, then let it boot up normally before installing custom things like hboots, recoveries, or ROMs.
I used to read posts of people saying that it must be done twice to assure everything gets installed right, and to avoid problems.
So, I recommend doing the ruu twice in a row, especially if your phone was not stock beforehand.
Howard
p.s. my favorite browser is opera mobile.
If s-off and unlocked, there is no need to relock to install an RUU.
Turns out I got a little too anxious. I thought stuff was working, but that was just because I was thankful that I installed the RUU right, still new to this. Still having all the same problems though
When you say install twice in a row, should I just try installing it once again tomorrow or twice since I downloaded an app or two?
Also, you say twice, then boot up normally, when I installed this it just booted up after the install was finished. Is there a way to install it again before it boots for the first time?
method
Make sure the Android Police 3.14.605.12 renamed PH98IMG.zip on your sdCard.
Boot up with Volume down, Power to get into hboot. It will ask your permission with a
Volume up and then run the update. I think they mean after 1st boot, answer English,
and get out of setup with No and default until steady. Do a factory reset in Settings,
Storage and boot up again. Then shut her off again and restart as previously to run that
PH98IMG.zip again.
After the next boot up, insert actual information like Google etc. to start Google Play
and fetch your favorite apps. Then you're running 100% stock.
noticed the same thing with in calls. Pull the phone away from your ear and the screen should come back on, but it seems delayed. I usually have to tap the power button twice to get the screen back on.
Running simplistic 3.0 which is based on the newest leak, after flashing the leak.
FWIW I have the issue with the screen not coming back on after pulling the phone away form your ear as well, however I'm on the ICS OTA, not the global.
I never had the problem on the ICS OTA, but I also only had that for a couple of days before getting the global (.1) from Android Police.
In the process of doing the second flash. As per michaels instructions.
I went to Verizon yesterday and tried seeing about exchanging the phone, since it's having all these problems, and was told no. That it's so common and pretty much every phone has the same things, so it's considered to be working and I just have to wait on a patch. He then told me that if I wanted I could void my warranty and s-off it to go back to GB. I found that kind of odd. Then he tried pushing the Razr on me, I said no I like HTC so then he told me that the Droid 4's are having the same problems too.
Related
I Have restorted to being the noob that signs up to ask a question...The other day I was driving (pre-root) and I look down to notice my phone had power cycled on its own. I thought it would come back one, boy I was wrong....
It spiralled into endless boot cycle. It would at first reboot get to the 4g screen and then back to the htc...over and over. I was able to get into Hboot, and atempt to do a factory reset that didnt help because it became a endless reboot that way as well.
Now before any of you say "why dont you warranty replace the phone" Im a VZW agent, alas we dont have a warranty on our phones when it comes to our concessions lines...
Now, at that point I said enough is enough and I delved into the world of rooting. I self taught everything within a few hours. I had my phone unlocked and ready to go. I picked Ineffabile (http://forum.xda-developers.com/showthread.php?t=1420513) to use as a rom, I followed the procedure to a T it installed correctly, but then when it came back on everything seemed to work fine...for about 5 minutes and then it happened agian a power cycle all over again. and again...and again. It now comes on works for about 5mins and then reboots.
Im at a complete loss at this point I have gone back into the SD card and deleted the ph98 file etc.... I just dont know what to do. I need this phone to work.
Any help is appreciated Thank you so much!
I know you said it's not the wcdma problem but will your phone stay booted with the back cover off?
Else I'd ruu back to stock. Could try the different radios and see if it helps.
If you want to try the older radios and are on the OTA you'll have to hexedit you mainver. There's a guide if you look.
older radios? Im still new to this so I applogize...
A couple weeks ago there was an OTA (over the air update) that updated the radios - what controls the calls part of your phone and can affect reception and other stuff, I don't know everything it does. So if you wanted to try the older ones there's a thread somewhere, I think by con247, that has the older ones.
Here's a couple guides to help you get familiar with rooting stuff:
http://androidforums.com/evo-3d-all-things-root/389787-beginners-guide-rooting-android-devices.html
http://androidforums.com/evo-4g-all-things-root/129648-quick-intro-rooting-those-new-rooting.html
You can try flashing the kernel again. Sometimes bootlooping is a kernel issue, although it doesn't seem to be the cause of your situation.
How about insurance? Do you have that? Can you still get it?
feralicious said:
A couple weeks ago there was an OTA (over the air update) that updated the radios - what controls the calls part of your phone and can affect reception and other stuff, I don't know everything it does. So if you wanted to try the older ones there's a thread somewhere, I think by con247, that has the older ones.
You can try flashing the kernel again. Sometimes bootlooping is a kernel issue, although it doesn't seem to be the cause of your situation.
How about insurance? Do you have that? Can you still get it?
Click to expand...
Click to collapse
I dont have insurance =/ and cant get it either. Im trying to find the radios, and what kernal should I be flashing? because I cannot find the one that should match the rom im using.
What I dont understand is why the phone powers on, works for a few moments like nothing is wrong what so ever. Then freezes and reboots.
Oh, there's a new way of packing a ROM with a script that then installs the kernel so I guess it's all together now on Ineffabilis. Here's a link to the MikMik forum where they still have the stock rooted kernel as a separate download:
http://themikmik.com/showthread.php...-Beats-Tweaks-2-01-605-11&p=164906#post164906
Just take off the part of the name before PH98IMG.zip, put it on your external sd card. Do a battery pull, then reboot into bootloader by holding volume down + power. It will flash it and I think reboot. Then delete the PHzip file after that.
Don't know if it will help...
Oh... when you flashed Ineffabilis, did you restore any data from a backup? If yes, try flashing again and not restoring any data, just set up everything again manually. Also, if you restored any data from another phone's backup that could have caused problems. Basically you don't want to restore data from a different ROM.
feralicious said:
Oh, there's a new way of packing a ROM with a script that then installs the kernel so I guess it's all together now on Ineffabilis. Here's a link to the MikMik forum where they still have the stock rooted kernel as a separate download:
Just take off the part of the name before PH98IMG.zip, put it on your external sd card. Do a battery pull, then reboot into bootloader by holding volume down + power. It will flash it and I think reboot. Then delete the PHzip file after that.
Don't know if it will help...
Oh... when you flashed Ineffabilis, did you restore any data from a backup? If yes, try flashing again and not restoring any data, just set up everything again manually. Also, if you restored any data from another phone's backup that could have caused problems. Basically you don't want to restore data from a different ROM.
Click to expand...
Click to collapse
This is a clean SD card, and I didnt create a backup because I couldnt get the phone past Hboot when it was doing boot cycles previous to the root. I re-ruu'd right now. And im starting from scratch. I used clockwork before, Im trying amon ra now.
So i would like to apologize first off by saying i am a complete and total noob in every sense of the word. This is the first time trying to root any phone. ok so heres the deal, the phone powers up... FINALLY... and will load to the homescreen but reboots the device. I used the BAMF ICS rom and put in a PGIMGnewfirmwarepeople.zip... ive tried to do the *#*# but as soon as i bring it up i can only get maybe the * or at best the *# but then it reboots itself. I mess with cars on a daily basis but unlike a car part i cant bang or heat up the phone to get the desired result. i attempted to do this since i saw the video on the rezound redifined 4.0.3 ICS with nova launcher.. it was a video by driodzero?
i have no idea where to go from here... i would greatly appreciate any help anyone can provide
If it is indeed a network bootloop, try booting with the backpate removed. As long as the network signal isn't overly strong it should be able to get you in.
i think that was one of the things i did... i tried to let it boot with the back off, then with the back off and SIM card out... but to no avail. is there a way to somehow cmd prompt the *#*# in order to switch the problem... i dont know if this helps but it is S-ON
No SIM means no signal, which means no network bootloop. Must be another cause. Looking at the Bamf ICS thread, did you upgrade your firmware to ICS properly first. Hmm.
i will go back and look.. the problem is it will not let be go back and down grade img file...
twd420 said:
i will go back and look.. the problem is it will not let be go back and down grade img file...
Click to expand...
Click to collapse
Yeah, S-off is suggested eventually since it allows you to downgrade from the leaks. Risk of perma-brick in certain situations, like flashing a bad download of radios. But it helps more than hurts to have that freedom.
On S-on you also need to make sure the boot.img gets flashed seperate in the bootloader for a given ROM.
thanx i will try the wire trick to get it to S-OFF but right now i cant even get the phone to power up to the home screen
You can check the hboot/radio version in the bootloader to confirm firmware version. See what it says there.
Would attempt a clean reinstall of the ROM if it is indeed on ICS (hboot 2.21 or 2.25) firmware proper.
Then make sure to wipe system, davik-cache and cache, flash ROM twice, the patch Joelz has, and flash the boot.img as a PH98IMG.zip in bootloader. Then boot the ROM up.
i would definitely try that except i can not get it to power on, nor can i get it to charge... i think its bricked, since ive even gone to the standard battery as well as using different chargers. i greatly appreciate your insight
twd420 said:
i would definitely try that except i can not get it to power on, nor can i get it to charge... i think its bricked, since ive even gone to the standard battery as well as using different chargers. i greatly appreciate your insight
Click to expand...
Click to collapse
Did you use ClockworkMod by any chance? My first Rezzy charging capability fried on its own eventually, but aside from hardware failure: that recovery has been reported to have issues when battery drains down...
So today, i went to load up a book in kindle and it crashed a couple times in a row. I figured no biggy, and rebooted the phone (which I can't remember the last time I did, weeks ago).
Upon reboot, for some reason, I'm stuck in a boot loop. I get the white screen with the HTC logo for about 15-30 seconds, it shuts down, repeat. I figured no biggy, everything is stock, I don't care about anything on it, I'll just use the RUU to fix it.
That is where my problem begins. Unforunately, I am updated to 2.95, and the last release RUU is 2.89, so it won't let me install. I can get into hboot, I can use fastboot, so I used fastboot to erase the cache. Anything I select (factory reset, recovery, etc) in hboot just sends me back into the reboot loop. Manually flashing errors out because of the mainver discrepancy. I can't use the low version fix because I'm not rooted, so sure, let's try that... I started the process and unlocked successfully. Now the problem is, any recovery I've installed (4ext from the root thread, CWM5.8 from the boot loop thread) installs fine, but whenever I reboot recovery, again, boot loop. It doesn't matter whether the reboot comes from a fastboot command or selecting recovery reboot from inside hboot.
So, desperate (and somewhat ignorant), I booted up into Linux and tried the unbrick post, and of course, the device never shows up with the battery out, cause it ain't bricked. I was hoping somehow that I could use it to replace hboot, figuring that might be corrupt or something crazy like that (grasping at straws really).
What I really need is a 2.95 RUU, but that hasn't been released, and I figured if that didn't work, something is probably fried hardware wise.
I restored a stock signed recovery, so more or less, right now I'm back exactly where I'm started (other then the fact that my phone is now unlocked) and just not sure where to go from here. Any advice would be helpful. Thanks!
EDIT: I'm a moron, and I forgot to specify, but the phone is sprint. I also don't have any service on it (mainly used as an mp3 player) so I don't have any recourse through them.
I'm almost considering bricking the thing to change the hboot (I haven't done my homework on it yet) any thoughts there? Or is it not something I can do because of my problem?
Sounds like you didn't flash a ROM after getting into recovery.
You need to make sure you're unlocked, and flash a recovery...4ext recovery is highly recommended as it has a setting just to help s on users.
To start and get you up and going, i suggest downloading butterz sense ROM and placing it on your SD card.
Then you need to wipe everything except your SD card
Now flash a new rom, like butterz sense.
Reboot and you should be good
If not you may need to flash boot.IMG in fast boot.
to run an old ruu, you will need to get s off and for that you need a booting ROM.
Good luck!
Sent from my Evo 3D CDMA using xda app-developers app
hossman said:
Sounds like you didn't flash a ROM after getting into recovery.
You need to make sure you're unlocked, and flash a recovery...4ext recovery is highly recommended as it has a setting just to help s on users.
To start and get you up and going, i suggest downloading butterz sense ROM and placing it on your SD card.
Then you need to wipe everything except your SD card
Now flash a new rom, like butterz sense.
Reboot and you should be good
If not you may need to flash boot.IMG in fast boot.
to run an old ruu, you will need to get s off and for that you need a booting ROM.
Good luck!
Sent from my Evo 3D CDMA using xda app-developers app
Click to expand...
Click to collapse
Well, the problem is that I can't get into a recovery after I install it, I'm still caught in the boot loop... but I will try flashing the boot img. Thanks!
If you would like a quicker response/fix check your pm....i can try to help
Sent from my Evo 3D CDMA using xda app-developers app
Well, I did reflash boot.img with no success. I went to relock the phone and was just gonna throw it on the shelf for a couple weeks (as I do have another one), and when I did that using fastboot, it sent the command over and the phone received it, but it gave me a failure message. So now, it doesn't turn on, when I hook it up to the charger, I get the red charging light for about 10 seconds, and very occasionally when I remove the battery and put it back in the HTC logo appears for about 3-5 seconds before the phone cuts off again.
I'm starting to think there was some hardware issue. Since it had a screwy digitizer anyways (and I chose to get another evo for 65 rather then paying 30-35 for the ldc/dig combo), I'm just going to keep it around for parts and maybe play with it another time.
Your offer of help is greatly appreciated however, thank you.
EDIT: It doesn't seem to be truly bricked, or it isn't a recoverable brick... not really seeing the dim red light and the unbrick script doesn't detect it... the phone isn't in emmc mode... but I'm not hugely concerned with it now like I said.
LOL I'm a moron... my battery went dead during the whole recovery thing. Slapped another battery in and I am back to the original problem. Ignore my last post, basically.
At this point, I think that I might be possible that I can't get into recovery because, to the best of my knowledge, the "fast boot" option is ticked in the settings. Unfortunately, I can't get into the phone to change it, so even more chicken/egg stuff. Bleh. I'm still chugging along, any input appreciated. Maybe I can call HTC or Sprint and beg for an RUU?
thatdumbguy said:
LOL I'm a moron... my battery went dead during the whole recovery thing. Slapped another battery in and I am back to the original problem. Ignore my last post, basically.
At this point, I think that I might be possible that I can't get into recovery because, to the best of my knowledge, the "fast boot" option is ticked in the settings. Unfortunately, I can't get into the phone to change it, so even more chicken/egg stuff. Bleh. I'm still chugging along, any input appreciated. Maybe I can call HTC or Sprint and beg for an RUU?
Click to expand...
Click to collapse
Good luck!
So pull the battery, and put it back in.
Hold volume up and then press power.
Does that bring you to boot loader?
Does it say unlocked?
Sent from my Evo 3D CDMA using xda app-developers app
Hello all, and thanks in advance for your help. I don't know if all of this is relevant to what happened, but I'm including it in case there's some small clue.
My phone was an S-OFF running HBOOT 2.09. I have been running Deck's CM builds for a while now with no issues. Last week, I decided to update to the new firmware which included the new partition layout.
HTC's RUU executable did not work, so I used the two zip method in this post. I first renamed rom_01 to PJ75IMG.zip, placed it on the SD card, rebooted and installed, then did the same with rom_02. Loaded everything up, seemed great with the stock image. After verifying everything was working fine, I flashed a new recovery (2.7.0.0b, via PJ75IMG.zip as well), and installed the latest OmniROM (3/31) via recovery. I had some issues with the PA 0-Day GAPPs that were recommended (force close errors with Google Keyboard) so after reflashing Omni switched back to the 12/09 GAPPs in Deck's thread. Everything seemed great.
A few days later, after having the phone in my pocket, my screen turned into a rainbow of pixels. Here is what it looks like: http://imgur.com/9ef6F8z It still seemed to work, just the screen was always that rainbow.
Thinking it was an issue with the firmware, I tried to RUU back to a somewhat earlier stock by using ViperRUU 3.16.651.3. However, after going through the RUU process, it had gone about 30-40 minutes with no updates, so I thought it had crashed. I checked to see if that was normal, and saw that it was not and they recommended restarting the process. I restarted both the ViperRUU (couldn't find phone anymore) and the phone, and now I think my phone might be totally bricked.
When I turn it on, there is nothing on the screen. It vibrates once, like it's trying to start, but nothing happens and the phone is otherwise unresponsive. I can try to boot into the bootloader (volume down + power) and that SEEMS to work, but the screen doesn't turn on then either. Occasionally, it will display the same rainbow pixels after "selecting" an option on the bootloader menu (I'm assuming). I've also pulled the SD card to insure it's not trying to read any PJ75IMG.zip.
I can't seem to get it to go into fastboot mode (single power button click after thinking I'm in the bootloader) and adb only shows the device as OFFLINE when I can get it to detect. It's hard to know what's going on without the screen.
Has anyone heard of this before? I probably ****ed something up but other than ending the ViperRUU early, not sure what. Thanks in advance, I very much appreciate it.
matt135353 said:
Hello all, and thanks in advance for your help. I don't know if all of this is relevant to what happened, but I'm including it in case there's some small clue.
My phone was an S-OFF running HBOOT 2.09. I have been running Deck's CM builds for a while now with no issues. Last week, I decided to update to the new firmware which included the new partition layout.
HTC's RUU executable did not work, so I used the two zip method in this post. I first renamed rom_01 to PJ75IMG.zip, placed it on the SD card, rebooted and installed, then did the same with rom_02. Loaded everything up, seemed great with the stock image. After verifying everything was working fine, I flashed a new recovery (2.7.0.0b, via PJ75IMG.zip as well), and installed the latest OmniROM (3/31) via recovery. I had some issues with the PA 0-Day GAPPs that were recommended (force close errors with Google Keyboard) so after reflashing Omni switched back to the 12/09 GAPPs in Deck's thread. Everything seemed great.
A few days later, after having the phone in my pocket, my screen turned into a rainbow of pixels. Here is what it looks like: http://imgur.com/9ef6F8z It still seemed to work, just the screen was always that rainbow.
Thinking it was an issue with the firmware, I tried to RUU back to a somewhat earlier stock by using ViperRUU 3.16.651.3. However, after going through the RUU process, it had gone about 30-40 minutes with no updates, so I thought it had crashed. I checked to see if that was normal, and saw that it was not and they recommended restarting the process. I restarted both the ViperRUU (couldn't find phone anymore) and the phone, and now I think my phone might be totally bricked.
When I turn it on, there is nothing on the screen. It vibrates once, like it's trying to start, but nothing happens and the phone is otherwise unresponsive. I can try to boot into the bootloader (volume down + power) and that SEEMS to work, but the screen doesn't turn on then either. Occasionally, it will display the same rainbow pixels after "selecting" an option on the bootloader menu (I'm assuming). I've also pulled the SD card to insure it's not trying to read any PJ75IMG.zip.
I can't seem to get it to go into fastboot mode (single power button click after thinking I'm in the bootloader) and adb only shows the device as OFFLINE when I can get it to detect. It's hard to know what's going on without the screen.
Has anyone heard of this before? I probably ****ed something up but other than ending the ViperRUU early, not sure what. Thanks in advance, I very much appreciate it.
Click to expand...
Click to collapse
This is a known hardware issue. Look here:
http://forum.xda-developers.com/showthread.php?t=2470296
It happened to me as well. I called Sprint and they replaced my phone for no charge.
Sent from my EVO using XDA Premium 4 mobile app
Ah, thanks for the link. I don't have TEP and it's out of warranty but I'll give Sprint repair a shot. Thanks!
Evolution_Freak said:
This is a known hardware issue. Look here:
http://forum.xda-developers.com/showthread.php?t=2470296
It happened to me as well. I called Sprint and they replaced my phone for no charge.
Sent from my EVO using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hmm...I bought mine secondhand and am going to be running it on Ting, you think they would do that for me if it happens? :laugh:
matt135353 said:
Ah, thanks for the link. I don't have TEP and it's out of warranty but I'll give Sprint repair a shot. Thanks!
Click to expand...
Click to collapse
I have TEP but that never even came up. I never filed a claim. They originally wanted me to go to a Sprint store to have a tech look at it but I complained that the nearest store is an hour away. So they took my word, after explaining what was happening, and sent me a new (refurbished) EVO and then I sent them the old one in the package they provided with the new one. This was back in November of 2013 and I never heard anything else about it.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Ok, I have 2 Rezounds. Rooted mine, went s-off and loaded Liquidsmooth and Gaaps. Everything works fine after 1 week.
Went and did second phone (wife's) and everything seemed to go well, but I had 1 thing occur in this phone that did not happen in my phone. When in HBoot, it would constantly update and then force a restart. I couldn't get into Recovery, and my phone would not be recognized as an ADB device. Googled around and think it was something related to the PH98IMG file, so I deleted that off of my SD Card and bingo it worked.
So I flashed AICP KitKat and its Gaaps. I thought all was well until my wife tried to call someone and the screen blacked out (call was being made) and then the camera launched. We could not unfreeze the screen, even holding Pwr button - had to pull the battery.
I assumed it was the ROM, so I loaded CarbonROM - same thing.
I reset to factory, wiped everything and retried, same thing.
I restored my factory backup latest OTA (ICS), and it worked fine. I reinstalled my Amon recovery file. Rest phone again, and reloaded. Same problem - my phone screen locks up on outgoing calls.
Help..........
One thing, I assume you can flash the ROM and Gaaps back to back with no reboot. I did this, but also wiped all data and reinstalled them separately with a reboot between. Same results.
one additional item
Not sure why, but no matter how I reset or wipe, my contacts always reload. I am not selecting Google backup when going through setup screen. I have reset and wiped all cache, dalvik cache, and all other.
briggss3 said:
Not sure why, but no matter how I reset or wipe, my contacts always reload. I am not selecting Google backup when going through setup screen. I have reset and wiped all cache, dalvik cache, and all other.
Click to expand...
Click to collapse
Google will always restore your contacts, even if you uncheck the backup/restore options, they are part of your Google account.
As far as your other issues, it kind of sounds like a proximity sensor issue, try installing https://play.google.com/store/apps/details?id=com.incredicontrol.ProxSensorCalibrator&hl=en and see if you can calibrate it... although this doesn't explain the camera issue, it does explain why the screen goes blank during a call and will not come back on.
I wonder also if my HBoot was corrupted. I don't know why, but when I booted into Bootloader, it would go through the motions of updating and then prompting me to restart (no other option). I read that this was because my Bootloader was finding a PH98IMG file on the SD card - is this an update exe? So I deleted it and Bootloader worked.
Also, both phones hung up (dots) on Rumrunner "Pouring 2" phase, and I had to break the connection during this step. Rebooting showed s-off, but I reran the exe file and it went through and completed "successfully."
Is there any need to update my recovery file, currently Amon RA which i did from Scotty's Newbie Guides? I downloaded 7.2.2.2 TWRP and tried to flash it in recovery, but it says fail. I can not find instructions on doing this for newbies - only the one that references s-on users, but it just glosses over.
I'll do the Play store download and see if that works.
Thanks for your help. I am totally a novice, although I have learned alot after going through this. I read alot on the Android Forums and XDA before I post.
AmonRa could be your whole problem actually... Get TWRP 2.7.1.1 and either flash it via Fastboot, use the PH98IMG way, or try Flashify as a last resort.
The chances that your Hboot is corrupted is slim, but you can download the firmware zip from 4.5.605.14 and reflash with no issues, it will not change S-Off or unlock state.
Updated TWRP and tried the resound calibrator, still same bad result. Phone will work on the OTA recovery file (ICS), but will not work on any kitkat ROM installs. When making calls, I can not power off or anything, total loss of phone while call is active (unless I pull battery). Once call is hung up, then I get control back of the screen.
I can't seem to find anything, should I go s-on then relock and unlock it again maybe? If you think that's a good idea worth trying, let me know and I'll search for instructions on how to do that.
More I think about it, its proximity sensor issues. I replaced the glass just before rooting. I downloaded the calibration app, but can't find instructions. I will play around with that a bit and see what happens. I'll post back if I can't get that to work, I may have replaced the adhesive too close to (or touching) the sensor in the ear piece.
briggss3 said:
More I think about it, its proximity sensor issues. I replaced the glass just before rooting. I downloaded the calibration app, but can't find instructions. I will play around with that a bit and see what happens. I'll post back if I can't get that to work, I may have replaced the adhesive too close to (or touching) the sensor in the ear piece.
Click to expand...
Click to collapse
You can find more info here: http://forum.xda-developers.com/showthread.php?t=1904974