I already install the Saurom 7 Rom on my i717, but inside the phone configuration say model number SGH-I717R, i´m on AT&T , do i need to install the patch for AT&T over this or i need to install another Saurom Rom ?, also it say android version 2.3.6 and baseband version i717ucla1 hand cafted by Saurom Projekt team build number RC_VII, is this correct or do i need to change something to get the android version 4 and baseband I717ucla6 ?
I fix this loading another AT&T Rom with Android v4 and ucla6
You need to see the Saurom thread ...
The thread is closed , but the QA thread is not..
And all of the setup information is in those areas , with all of the solutions listed ....g
Did OP find an answer to this problem? I have the same issue
HeyLookItsKarl said:
Did OP find an answer to this problem? I have the same issue
Click to expand...
Click to collapse
He solved his own problem by flashing a different rom. He said that in his second post.
Related
Hi there (topic should say GT-i9100G)
Been searching for days to find a way to root my GT-i9100G model. I found plenty for previous builds of my kernel but nothing for this current one.
So I'm at the end of my wits and for the first time in years I'm turning to creating a thread on a forum, getting ready for the flame.
kernel: 2.6.35.7 DELL165 dpi @ # 2
Android version: 2.3.6
Build number is: GINGERBREAD.XXLA1
Baseband version: I9100GXXKL4
I had a i900 from work but after it broke my work phone was replaced with this model and I'm sick of not being able to run ICS on it.
Anyways, wanna get CWM on it, but I'm very green at the whole custom ROM scene, only thing I ever rooted was my 10.1 tab with Odin to flash AOKP's builds :\
Anyways, if anyone has any tip, don't be shy.
fladmus said:
Hi there
Been searching for days to find a way to root my GT-i900G model. I found plenty for previous builds of my kernel but nothing for this current one.
So I'm at the end of my wits and for the first time in years I'm turning to creating a thread on a forum, getting ready for the flame.
I'm on: kernel 2.6.35.7 DELL165 dpi @ # 2 running Android 2.3.6
I had a i900 from work but after it broke my work phone was replaced with this model and I'm sick of not being able to run ICS on it.
Anyways, wanna get CWM on it, but I'm very green at the whole custom ROM scene, only thing I ever rooted was my 10.1 tab with Odin to flash AOKP's builds :\
Anyways, if anyone has any tip, don't be shy.
Click to expand...
Click to collapse
You DID mean GT-i9100G, right?
Need to know more, anyways. Build number?
Use super one click
Yes of course, silly me, GT-i9100G is my phone.
Build number is: GINGERBREAD.XXLA1
Baseband version: I9100GXXKL4
I've read others talk about super one click, the reports were very mixed and I think this build will not work, or am I wrong?
fladmus said:
Yes of course, silly me, GT-i9100G is my phone.
Build number is: GINGERBREAD.XXLA1
Baseband version: I9100GXXKL4
I've read others talk about super one click, the reports were very mixed and I think this build will not work, or am I wrong?
Click to expand...
Click to collapse
I believe SuperOneClick requires an insecure kernel to be flashed to your phone first before using it, right? You just have to make sure the insecure kernel is for the I9100G, and not the I9100. And if you cannot find an exact match for your kernel version for an insecure kernel, you will need a copy of your secure kernel to flash back when you're done rooting.
I'm afraid I don't know where to get these things for an I9100G, however, so you're on your own to look for them. (unless someone who knows this information sees this post and is kind enough to post it to you)
EDIT to add: that said, I've heard of a few custom kernels for the I9100G that, when flashed, will root your phone for you. I don't remember what they are though, you'll have to search for them.
EDIT 2: Found one (superatmos) that has a version compatible with your build.
Hey All.
I rooted my phone previously using method one from this thread http://forum.xda-developers.com/showthread.php?t=1746794 and installed clockwork mod using this: http://galaxys2root.com/galaxy-s2-r...ckworkmod-recovery-on-rooted-galaxy-s2-i9100/
My phone's carrier is Optus and I am currently running Android 4.0.4 with baseband version I9I00XXLQ6 and build number IMM76D.XWLPW
I'm wanting to update my firmware to Android 4.1 .. can anyone point me in the right direction of some instructions which will enable me to do this with my current phone versions?
Thanks
I have recently flashed Jellybam onto my S2... (4.1.2)
Other than I cant find google talk on the latest version, its works perfectly.
The instructions are pretty clear once you have your phone rooted with Clockworkmod. It only takes a small number of steps and a couple of minutes.
This is the thread for the ROM
http://forum.xda-developers.com/showthread.php?t=1903162
and it points you to this site
http://www.igio90.net/device/samsung-galaxy-s2-i9100/
I'm no expert (not by a long way!) but shout if you have any questions and if I can help you out, I will!
cheers,
Paul.
ladyb_ said:
Hey All.
I rooted my phone previously using method one from this thread http://forum.xda-developers.com/showthread.php?t=1746794 and installed clockwork mod using this: http://galaxys2root.com/galaxy-s2-r...ckworkmod-recovery-on-rooted-galaxy-s2-i9100/
My phone's carrier is Optus and I am currently running Android 4.0.4 with baseband version I9I00XXLQ6 and build number IMM76D.XWLPW
I'm wanting to update my firmware to Android 4.1 .. can anyone point me in the right direction of some instructions which will enable me to do this with my current phone versions?
Thanks
Click to expand...
Click to collapse
Just download the rom you want from dev section, place on sdcard and flash via CWM same as you would any other rom.
so i just replaced my old Xperia X10 with my new SGS3 and i wanted to flash CyanogenMod on it, because i have used it on my X10before , on the SGS3 im running 4.1.2 and i have found a rooting tutorial but i couldnt find any specific information on whether i could flash it straight from that version of android, or if i have to downgrade to ICS first to make it work, because i have read in the CM rom thread that my Wifi may not be working so im worried about that. also what do i need to do before installing it, do i need to wipe data/cache/dalvik cache like on my x10 or not? thank you in advance for your answer
[email protected] said:
so i just replaced my old Xperia X10 with my new SGS3 and i wanted to flash CyanogenMod on it, because i have used it on my X10before , on the SGS3 im running 4.1.2 and i have found a rooting tutorial but i couldnt find any specific information on whether i could flash it straight from that version of android, or if i have to downgrade to ICS first to make it work, because i have read in the CM rom thread that my Wifi may not be working so im worried about that. also what do i need to do before installing it, do i need to wipe data/cache/dalvik cache like on my x10 or not? thank you in advance for your answer
Click to expand...
Click to collapse
CM10 discussion post is alive and well .
You are that worried then don't flash CM pick another less worrying rom .
Im just asking if i can install CM10 directly from rooted stock 4.1.2 or if i need to downgrade first
[email protected] said:
Im just asking if i can install CM10 directly from rooted stock 4.1.2 or if i need to downgrade first
Click to expand...
Click to collapse
Yes you can
But with a 4.1.2, you have now a new bootlpader which include a new protection. So you will have a red exclamation mark on boot.
It doesn't matter, all is fine and everything will be working, it's just related to warranty service.
Check also forum, you can downgrade bootloader to avoid exclamation mark.
Calaxy S2 i9100 (international)
stock Android version Gingerbread 2.3.5 not rooted
Baseband version: I9100XXKI4
Kernal version: 2.6.35.7-I9100JPKJ2-CL655700 [email protected] #2
Build number Gingerbread.JPKJ2
no carrier. GSM sim card.
I want to perform the following to my i9100 phone:
1) How to move from the official Gingerbread 2.3.5 version to cyanogenMod 9 ROM. Including, can I install Cyanogen 9 on top of 2.3.5 kernal.
2) Best safe way to backup original stock Gingerbread ROM in case something doesn't go according to plan.
3) How and at what point during upgrade to CM 9 to root.
4) Which is the proper, stable kernal for this CM 9 (dorimanx has been recommended). At what point, during the upgrade process, is the kernal changed. This is a main concern I have.
I have never done any of this before. I didn't want to upgrade to Android 4.0.04 because of potential Super Brick or other complications. Jelly Bean is not an option for other reasons.
CyanogenMod 9 would seem to meet all my current needs for this phone, and is open source)
I have not seen a detailed "How to" guide to upgrade from stock Gingerbread 2.3.5 to CycnogenMod 9, rooting, and kernal install. Just parts of it scattered, a year old. Can someone guide me through this.
I just need a flexible stable everyday ICS level phone. I'm open to suggestions. Please remember, I have not done any of this before. Thank you.
Spoon feeding is not aloud here on xda. Please read them scattered threads for the info you need them put it all together and then read abit more. Learning is the key to xda not just asking then getting what you want. First thing you need to look at is rooting. Good guide on here telling you about root
_______________
Alliance rom
andrewwright said:
Spoon feeding is not aloud here on xda. Please read them scattered threads for the info you need them put it all together and then read abit more. Learning is the key to xda not just asking then getting what you want. First thing you need to look at is rooting. Good guide on here telling you about root
_______________
Alliance rom
Click to expand...
Click to collapse
Exactly.Search before posting.
Here,I will help you http://bit.ly/18QGUPs
GamingDj said:
Exactly.Search before posting.
Here,I will help you http://bit.ly/18QGUPs
Click to expand...
Click to collapse
Nice link :thumbup:
_______________
Alliance rom
hi there
i am Aussie and i just now transferred from apple to android so i am new to android and rooting. i need help in rooting this device. i couldn't find any root software for my firmware and version
this my phones OS Spec
SAMSUNG GALAXY S 2
MODEL NUMBER: GT-I9100T
ANDROID VERSION: 4.1.2
BASEBAND VERSION: I9100TDVLS3
KERNEL VERSION: 3.0.31-889696
[email protected]#3
SMP PREEMPT APRIL 4
KST 2013
BUILD NUMBER: JZO54K.I9100TDVLSM
can someone please tell me how to root this phone step by step
thanks in advance
Thread stickied near the top of Q&A has all the info you need/a quick & simple root method.
Hello, welcome to android First rule with us: You have to search and read a lot Here are a thousand people asking the same question : https://www.google.pt/search?q=9100...lopers.com&es_sm=122&biw=1920&bih=946&qscrl=1
Since it's your first time, i've searched for you and you can use this post : http://forum.xda-developers.com/showthread.php?t=1746794
Good luck and have fun
howdy from aus
i have the same issue lolz but i wont twrp on it also i tried install ressurcution remix but it ****ed me phone had to pay 60 bucks to get stock **** back on it this is why i love samsung the only mobile producer that can just reinstall stock kernal etc my phone was in cwm always go to it so its back know fixed so can anyone tell me can i run remix or is there another sick rom for s2gti9100t also whatr diff to gti9100- to gti9100t ????? cause this is where i think issue lies im trying to run gti9100 roms on it well hope some one can reply asap as i can root through changing kernal to jaboo but i hate cwm twrp with touch pad love it cwm should go touch to then i might like it more but that only reason i dont like cwm is cause it not touch like twrp go team win
oxidehaxs said:
i have the same issue lolz but i wont twrp on it also i tried install ressurcution remix but it ****ed me phone had to pay 60 bucks to get stock **** back on it this is why i love samsung the only mobile producer that can just reinstall stock kernal etc my phone was in cwm always go to it so its back know fixed so can anyone tell me can i run remix or is there another sick rom for s2gti9100t also whatr diff to gti9100- to gti9100t ????? cause this is where i think issue lies im trying to run gti9100 roms on it well hope some one can reply asap as i can root through changing kernal to jaboo but i hate cwm twrp with touch pad love it cwm should go touch to then i might like it more but that only reason i dont like cwm is cause it not touch like twrp go team win
Click to expand...
Click to collapse
A good starting point for this S2 variant is HERE(Australian S2 help guide). A lot of your questions will be answered there, just have a good read. The "T" version has the same basic hardware and can run the same roms as the international version. Also there is a cwm that is touch: Philz. Unfortunately both philz and cwm are no longer being updated, although at the moment the latest versions are still good.
hey bro can u help me
Dakura said:
Hello, welcome to android First rule with us: You have to search and read a lot Here are a thousand people asking the same question : https://www.google.pt/search?q=9100...lopers.com&es_sm=122&biw=1920&bih=946&qscrl=1
Since it's your first time, i've searched for you and you can use this post : http://forum.xda-developers.com/showthread.php?t=1746794
Good luck and have fun
Click to expand...
Click to collapse
hey bro i rooted with jaboo kernal and tried remix but it ****ed me phone so got it back to normal i wont to use the touch version for s2 look under s2 u see the one talking about it a zip file odin wont run it so can i run it through normal recorey and install cwmtouch or can u help me find a tar version for odin im new i have gti9100t and there is to many ways to root and to much could u plzz tell me the best way to get twrp or touch cwm and super user root etc and what rom do u suggest cause remix **** it up last time and do i download roms for gti9100 or atnt version i dont know plzzz help i can do it jaboo way but then it custom kernal and dont like that
cheers for reply
noppy22 said:
A good starting point for this S2 variant is HERE(Australian S2 help guide). A lot of your questions will be answered there, just have a good read. The "T" version has the same basic hardware and can run the same roms as the international version. Also there is a cwm that is touch: Philz. Unfortunately both philz and cwm are no longer being updated, although at the moment the latest versions are still good.
Click to expand...
Click to collapse
So gti9100t is the verient one cause still scared ****ing up I did how evet root with cwm touch but the recory goes back to stock why I am rooted and still on stock everything so could u plzz find me twrp for my phone went on site but gti9100t not listed also plzz tell methe best custom rom tthat will work jusy looked evetywhere but gti bit I cant find the at one gti9100t find others like gti9100 atnt sprint so what is mine and wh