Hi guys,
I have an international galaxy s3 rooted phone.I'm definitely new to all those rooting stuff,so i'm writing those with my limited knowledgeI have a stock rom.I didn't install any other rom.I have 4.0.4 version.Today ı wanted to install an OTA update.It downloaded the file.But after that it didn't go well and it was stuck in cwm recovery mode.I couldn't go any further,it was written that the 'signature verification failed,installation aborted'.I just wanted to ask you that how i can solve this problem.Do i have to unroot and update or is there any other solution for that?Thanks so much.
cenk1303 said:
Hi guys,
I have an international galaxy s3 rooted phone.I'm definitely new to all those rooting stuff,so i'm writing those with my limited knowledgeI have a stock rom.I didn't install any other rom.I have 4.0.4 version.Today ı wanted to install an OTA update.It downloaded the file.But after that it didn't go well and it was stuck in cwm recovery mode.I couldn't go any further,it was written that the 'signature verification failed,installation aborted'.I just wanted to ask you that how i can solve this problem.Do i have to unroot and update or is there any other solution for that?Thanks so much.
Click to expand...
Click to collapse
Use next time the search, please...
http://forum.xda-developers.com/search.php?searchid=58891747
dfMails said:
Use next time the search, please...
http://forum.xda-developers.com/search.php?searchid=58891747
Click to expand...
Click to collapse
Thanks
The link appears to be dead. Anyone got another? Thanks
duskdevilza said:
The link appears to be dead. Anyone got another? Thanks
Click to expand...
Click to collapse
Signature Verification failed means that the zip was not signed or improperly signed..in CWM set the option to not check for signature verification and then try..
Related
Hi Guys,
I hope I've posted in the right place. I am basically noob in installing custom firmware and I wanted to try it anyway with no experience.
Bootloader unlocking successful.
I flashed recovery-nozomi.img using cmd commands without realizing that I didn't have the custom rom saved in my xperia s. So I am stock in recovery mode with no idea what to do next even just to go back in normal mode. Please help I am really a newbie in installing custom ROM. Any process with be gladly appreciated since I just want to go back to normal mode if I can't install any custom ROM.
Build no.75 that's all I remember about my phone since I just bought this yesterday.
I'm in the Philippines and this a generic version if that helps.
Any help will be gladly appreciated or will even give a donation.
Thanks in advance guys!
Regards!
Flashtool.
K900 said:
Flashtool.
Click to expand...
Click to collapse
Hello K900 yes I can still use flashtool but I'm not really sure which firmware to use and what is the right process to do it. Please help!
xreyan said:
Hello K900 yes I can still use flashtool but I'm not really sure which firmware to use and what is the right process to do it. Please help!
Click to expand...
Click to collapse
Use the TW .76.
hello developers ! thanks for ur amazing work i keep my galaxy pop 5570 updated 4.2.1
i recently purchased spice mi 1010 which comes with 4.1.1 and i wish to make it customizable by cyanogen mod.
Searched the forum twice for my device and it wasnt there. if i had been careless pls route me there or help me with it.
i saw cwm for rk 3066 devices but my device was not listed in that.
1.What happens if i try that and my device gets bootloop ?
2.Can i extract the stock rom for future use?
thanks in advance :highfive:
giri91 said:
1.What happens if i try that and my device gets bootloop ?
2.Can i extract the stock rom for future use?
thanks in advance :highfive:
Click to expand...
Click to collapse
1. you can always go back to stock, or if you have a nandroid ready, you can restore it
2. i dont understand your question, what do you mean by "extract stock rom"?
Jack Jake said:
1. you can always go back to stock, or if you have a nandroid ready, you can restore it
2. i dont understand your question, what do you mean by "extract stock rom"?
Click to expand...
Click to collapse
Thanku jack:good:
Can u explain me how to install cwm to spice mi 1010 or can u redirect me where the steps are.....
giri91 said:
Thanku jack:good:
Can u explain me how to install cwm to spice mi 1010 or can u redirect me where the steps are.....
Click to expand...
Click to collapse
okay first of all you need root (of course)
1.download ROM Manager from play store.
2. open and grant if it asks for root access
3. select "Recovery Setup<Then "Install Or Update Recovery" and select ClockworkMod
4. choose your device name
5.if its not there press "Device Not listed above"
6.Press "Flash ClockworkMod Recovery"
7. wait for it to flash
8. Done
now go ahead and FIRST make a backup
mod on spice 1010
giri91 said:
hello developers ! thanks for ur amazing work i keep my galaxy pop 5570 updated 4.2.1
i recently purchased spice mi 1010 which comes with 4.1.1 and i wish to make it customizable by cyanogen mod.
Searched the forum twice for my device and it wasnt there. if i had been careless pls route me there or help me with it.
i saw cwm for rk 3066 devices but my device was not listed in that.
1.What happens if i try that and my device gets bootloop ?
2.Can i extract the stock rom for future use?
thanks in advance :highfive:
Click to expand...
Click to collapse
Hi Giri,
could you mod your Spice Mi 1010 tab ? I also purchased one and would eventually like to run Ubuntu on it... Thanks.
RaviS1010 said:
Hi Giri,
could you mod your Spice Mi 1010 tab ? I also purchased one and would eventually like to run Ubuntu on it... Thanks.
Click to expand...
Click to collapse
wat jack said seems to be working but i didnt try still coz very busy in job! shd try soon
steps
giri91 said:
wat jack said seems to be working but i didnt try still coz very busy in job! shd try soon
Click to expand...
Click to collapse
ok, please let me know when you are done. I also tried jack's steps. But at step 6 it asks me whether i have installed the clockworkmod recovery
manually. And ofcourse i have not. So stuck at that. Is this because i have not yet rooted my device. ? Do u know how to root this device. Is the process generic?
Stuck at the same point.. all the root softwares are useless out there. Tried all possible methods but to no avail.
the clockwork recovery mod says the device has one recovery installed and i tried to boot into it with no success. Aren't there any solutions for these as this is a great tab for around 10K.
Rooting is possible
elisha13 said:
Stuck at the same point.. all the root softwares are useless out there. Tried all possible methods but to no avail.
the clockwork recovery mod says the device has one recovery installed and i tried to boot into it with no success. Aren't there any solutions for these as this is a great tab for around 10K.
Click to expand...
Click to collapse
goto technotweet . com and see the blog how-to-root-spice-stellar-pad-mi-1010 (i don't know why google is not showing this in search result
can't post link as i am new :silly:
Follow the steps provided in 2 links on this page one by one.
I have followed the procedure and rooted my spice mi 1010 successfully
rooted
utk787 said:
goto technotweet . com and see the blog how-to-root-spice-stellar-pad-mi-1010 (i don't know why google is not showing this in search result
can't post link as i am new :silly:
Follow the steps provided in 2 links on this page one by one.
I have followed the procedure and rooted my spice mi 1010 successfully
Click to expand...
Click to collapse
I could root the Spice Mi 1010 according to the instructions. Now what ? the clockworkmod recovery needs to be installed manually ?
cwm rk3066
giri91 said:
hello developers ! thanks for ur amazing work i keep my galaxy pop 5570 updated 4.2.1
i recently purchased spice mi 1010 which comes with 4.1.1 and i wish to make it customizable by cyanogen mod.
Searched the forum twice for my device and it wasnt there. if i had been careless pls route me there or help me with it.
i saw cwm for rk 3066 devices but my device was not listed in that.
1.What happens if i try that and my device gets bootloop ?
2.Can i extract the stock rom for future use?
thanks in advance :highfive:
Click to expand...
Click to collapse
Hi giri,
Where did you find the cwm for rk3066?
hey guyz wanna by this tab!! not sure if good or bad ! please give your reviews??
this method is not working
Jack Jake said:
okay first of all you need root (of course)
1.download ROM Manager from play store.
2. open and grant if it asks for root access
3. select "Recovery Setup<Then "Install Or Update Recovery" and select ClockworkMod
4. choose your device name
5.if its not there press "Device Not listed above"
6.Press "Flash ClockworkMod Recovery"
7. wait for it to flash
8. Done
now go ahead and FIRST make a backup
Click to expand...
Click to collapse
Step 6 is not present in the software so I cannot proceed further. How can I know whether my device is rooted or not?
Hi guys i have problem... tried i dont know what... flashinkernel or something... but now im stuck on ODIN screen with could not do normal boot... is here somebody that can give me stock recovery or something? if u need.. this is my build KTU84P.G360FXXU1ANL3 ... i have this phone for 2 days and its F....
BlackousSE said:
Hi guys i have problem... tried i dont know what... flashinkernel or something... but now im stuck on ODIN screen with could not do normal boot... is here somebody that can give me stock recovery or something? if u need.. this is my build KTU84P.G360FXXU1ANL3 ... i have this phone for 2 days and its F....
Click to expand...
Click to collapse
reflash with stock rom
cant find any on internet...actually.. i found one but the download is like 70kb/s ... i thinkits fake ...
Found rom?
BlackousSE said:
cant find any on internet...actually.. i found one but the download is like 70kb/s ... i thinkits fake ...
Click to expand...
Click to collapse
Did you found any? Have the same phone, still with stock rom.
syntax74 said:
Did you found any? Have the same phone, still with stock rom.
Click to expand...
Click to collapse
yes some guy here on forums posted his image files .. i used them with odin i think... but then i have been gettin that ****ty knox popup message to restart device... by officially updating my device i removed it.. now downloaded kingroot and its rooted
This is it
Hi Guys!
Is there any soul who can help me out?
I have a SGP321 Tab Z version with stock 4.4 on it, and rooted with towelroot (i guess this is the name!)
Every single update i've done since initial version 4.1 had been without any problems and all by OTA.
Now, after downloading the latest version, after click install button, i get a message box telling me that the tablet will restart and will take some 41 minutes to do the job. OK then, it reboots, but after one or two minutes max, it reboots again and nothing done. Then on the notification bar i get a message saying that the update failed and i should do it again.
Well Mates, after 5 tries i gave up?
Maybe someone have had a problem like this one??
Might have something to do with the root method?? I really can't figure out....
Thanks for your kind help in advance.
Crake said:
Might have something to do with the root method?? I really can't figure out....
Thanks for your kind help in advance.
Click to expand...
Click to collapse
To tell long story short, it is because you are rooted. Before applying OTA device checks system files for modifications and stops install if it finds one. Root as you know is a modification.
So, any suggestion?
What should i do?
Thanks, again
Crake said:
So, any suggestion?
What should i do?
Thanks, again
Click to expand...
Click to collapse
So if you're on a rooted KitKat now it's easier for to install recovery and flash prerooted 5.0.2 firmware straightforward.
Rootk1t said:
So if you're on a rooted KitKat now it's easier for to install recovery and flash prerooted 5.0.2 firmware straightforward.
Click to expand...
Click to collapse
Sorry to bother again, but on the second link you provided, something have frightened me:
"...Unfortunately, XZDualRecovery isn't working for TabZ with Lollipop at the moment.
That's why it is not included..."
So, will it work?
Crake said:
Sorry to bother again, but on the second link you provided, something have frightened me:
"...Unfortunately, XZDualRecovery isn't working for TabZ with Lollipop at the moment.
That's why it is not included..."
So, will it work?
Click to expand...
Click to collapse
recovery is working good now.
hello guys,
i have a MT2-L05 with LOLLIPOP ( MT2-L05C00B850 ). Since i have some troubles with my applications (facebook, wakeup, camera,...).
i wish to put back the older version THE KITKAT 4.4.4
i can't find out how to downgrade my smartphone
is it possible that someone explains me how to do it step by step and tells me where to files for download please.
i'm french so sorry for my english.
thank you in advance.
Do you have an sd card? Are you still on stock recovery? Are you familiar with flashing a different firmware via the stock recovery? If so, I believe firmware version B611 will flash over B850 and allow you to install KitKat, either B603 or B606.
tomlemange said:
Do you have an sd card? Are you still on stock recovery? Are you familiar with flashing a different firmware via the stock recovery? If so, I believe firmware version B611 will flash over B850 and allow you to install KitKat, either B603 or B606.
Click to expand...
Click to collapse
hi,
yes I have an SD card.
no I 'm not very comfortable with handling firmware .
I put my file in DLOAD and I go through the application to upgrad it .
but I don't know how to go back and xhere todownload the good firmwares
it's possible to tell me where to find the good firmware ( and stock recovery) and tell me step by step how to proceed? please
Thank you for your reply
romain5183 said:
hi,
yes I have an SD card.
no I 'm not very comfortable with handling firmware .
I put my file in DLOAD and I go through the application to upgrad it .
but I don't know how to go back and xhere todownload the good firmwares
it's possible to tell me where to find the good firmware ( and stock recovery) and tell me step by step how to proceed? please
Thank you for your reply
Click to expand...
Click to collapse
Hello,
Another user had the same problem in the index thread, and I found him a link to Huawei's firmware page for the L05. The problem is... the page is in Chinese.
Also, another user said it did not work for him, and he downgraded using another method.
Here are some quotes from the thread:
shau said:
Hi all I just upgraded my MT2-L05 to Can anyone please guide me how to downgrade back to Kitkat as I now realise Kitkat had more features than Lollipop for my device.
Many thanks in advance.
Click to expand...
Click to collapse
Ahmedmukhtar1133 said:
Unfortunately, I can't provide you link. Just goto huawei website and download stock rom(kitkate) for mate2-l05 & after extracting put it into sdcard root directory. now simply flash it.
Click to expand...
Click to collapse
ScoobSTi said:
It's on the first page of this thread in post #3, but the page is in Chinese.
Click to expand...
Click to collapse
scpion said:
I have tried. I am using L05. Downgrading from 5.1 to 4.x stock roms will fail. Installation does not go pass the 1% mark. There nothing wrong with my sd card or the file cos before upgrading to LP, I just used it to flash back to 4.4.2 stock.
Btw, if anyone root or modify the stock 4.4.2 before, upgrading to LP will fail also, even if u do a factory reset. So what I did was wipe the whole thing by flashing back the stock with the 3 button magic..
As with the L03, changing dpi will also crash the phone. So pls do not try.
I also just realise that the default Huawei app store have a lot of goodies in there. Including all Google apps and those sync adaptors required for contacts and calenders. Explore it.
Click to expand...
Click to collapse
You should send a message to @scpion and hopefully he will respond and give you a solution.
Erm.. I dun think I have a solution... I didn't try again after failing multiple time during then.. I didn't have problems with 5.1.1 either so I lived with it.. Ha.. But now it's just sitting in my drawer due to lack of development for L05.. Not as "fun" as my other phones.. Good luck...
Probably backup your data and do a hard reset or flash the stock 5.1.1 again. From my experience with it, I didn't have any major problem and the firmware is pretty good.
romain5183 said:
hi,
yes I have an SD card.
no I 'm not very comfortable with handling firmware .
I put my file in DLOAD and I go through the application to upgrad it .
but I don't know how to go back and xhere todownload the good firmwares
it's possible to tell me where to find the good firmware ( and stock recovery) and tell me step by step how to proceed? please
Thank you for your reply
Click to expand...
Click to collapse
Are you on stock recovery? I can't remember where I downloaded my firmwares from, usually whichever link google would turn up. Google translate seemed to work well enough to translate Chinese to English for me whenever I've tried to find a file.