Full recovery for YP-G70 (US 5.0)? - Samsung Galaxy Player 4.0, 5.0

Hey guys,
I have a Galaxy Player 5.0 (US edition, capacitative buttons) and it decided to just stop booting one morning. I was running version 1.4 of this custom rom. I'm only able to enter download mode, and can't even get to the Samsung logo. After trying various methods and trying to flash different bootloaders/PIT files/ROMs with ODIN, I'm back to where I started.
Is there any set of bootloader/PIT/ROM files that I can use to flash with ODIN to get my Galaxy player up and running again? All of the older download links on this forum seem to be dead ends.
Thanks!

Hey. I was up to the point where my device was hard bricked. Wouldn't go into download mode. So. First: Get boot loaders. Those can be found in AdamOutlers thread of the UnBrickableMod somewhere in the dev forum here. Next, flash Entropy512's Kernal, make sure auto reboot is OFF and re partition is off too. For flashing both boot loader and kernal. Then flash a stock gingerbread rom. Then unplug, reboot into recovery and wipe cache and dalvik cache. Then you SHOULD be fine and booted into stock. Then download your rom again and re flash. Any trouble, let me know bud.
Sent from my YP-G70 using xda app-developers app

f_scott_scrambled_eggs said:
Hey guys,
I have a Galaxy Player 5.0 (US edition, capacitative buttons) and it decided to just stop booting one morning. I was running version 1.4 of this custom rom. I'm only able to enter download mode, and can't even get to the Samsung logo. After trying various methods and trying to flash different bootloaders/PIT files/ROMs with ODIN, I'm back to where I started.
Is there any set of bootloader/PIT/ROM files that I can use to flash with ODIN to get my Galaxy player up and running again? All of the older download links on this forum seem to be dead ends.
Thanks!
Click to expand...
Click to collapse
Well did you try using this stock rom for the US 5.0? http://forum.xda-developers.com/showthread.php?t=1520728 it's in the first comment, and is odin flashable.

EcHoFiiVe said:
Hey. I was up to the point where my device was hard bricked. Wouldn't go into download mode. So. First: Get boot loaders. Those can be found in AdamOutlers thread of the UnBrickableMod somewhere in the dev forum here. Next, flash Entropy512's Kernal, make sure auto reboot is OFF and re partition is off too. For flashing both boot loader and kernal. Then flash a stock gingerbread rom. Then unplug, reboot into recovery and wipe cache and dalvik cache. Then you SHOULD be fine and booted into stock. Then download your rom again and re flash. Any trouble, let me know bud.
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
After finding the right stuff and flashing it (and making sure I had a pretty good charge in my player), I was able to get into recovery, wipe, and reboot into stock! Thanks! A couple of things I've noticed:
Battery indication doesn't work (even when I turn it off and charge; still thinks it's at zero battery all of the time)
Capacitative buttons work, but won't light up.
Would putting on a different ROM fix any of these issues?

Try to wipe battery stats in recovery and for buttons maybe rom you flashed was for international
Sent from my GT-I9000 using XDA

Related

Having many problems with Fascinate

I was sent a Fascinate as a Droid Incredible replacement. I was able to root it without a hitch but now my CWM can't mount anything. Won't mount anything can't bring up any logs. I am using the CM7 Clockwork and my phone is now bricked and I'm tired of using Odin to restore it and root it again then flash CWM and CM7, I lose all my games and free apps which I have to download again.
What am I doing wrong?
Also, are you using atlas.pit when odining to stock? After doing what does the phone stop working entirely (IE does the phone boot up CM7 and then brick, or can it not load CM7 at all)? Can you run stock without your phone breaking?
skafan2 said:
Also, are you using atlas.pit when odining to stock? After doing what does the phone stop working entirely (IE does the phone boot up CM7 and then brick, or can it not load CM7 at all)? Can you run stock without your phone breaking?
Click to expand...
Click to collapse
Yeah. I can work on stock just great.
What is the best rooting method to use if I plan on using CM7?
What I do is use Super One Click to root (http://forum.xda-developers.com/showthread.php?t=803682), then flash the custom CM7 CWM, and then flash CM7 in the custom recovery after wiping data, cache, and dalvik.
Use the CM7 from here: http://forum.xda-developers.com/showthread.php?t=1190668
Do I use the recovery in that thread? I've been using that one as well. I will re download the rom then.
Yes. Here are the exact steps from that thread after rooting with SuperOneClick:
Start with a rooted device (do not ask us how to do this).
Flash ClockworkMod Recovery attached to this post.
Download and push the ROM zip file to the sdcard.
Reboot into recovery.
Do a Nandroid Backup!
Wipe Data! Seriously! Do it!
Install the ROM zip from sdcard
Install gapps package linked here (http://wiki.cyanogenmod.com/index.php?title=Latest_Version#Google_Apps)
Alright. Let me try that again now. I just put the Nightly #8 on my SDCARD
Flashed it through the recovery, it's at the Samsung logo now. I am going to leave it there for a bit and see if that changes.
Yeah. It's stuck at the logo. I reboot into recovery and I get the log errors. That's 6 Odin resets today.
Make sure you use atlas.pit when restoring to stock. If you are following those directions exactly, all I can say at this point is to try another ROM (maybe MIUI or OMGB) and see if that works, unless another poster wants to take a stab at this.
Yeah, I'm using the atlas 2.2.pit
I had it working yesterday but only if I flashed the rom using the orange recovery through ROM Manager. I might try that again.
Hyphnx said:
Alright. Let me try that again now. I just put the Nightly #8 on my SDCARD
Flashed it through the recovery, it's at the Samsung logo now. I am going to leave it there for a bit and see if that changes.
Click to expand...
Click to collapse
I think the nightly might be your problem?...my $.02...and there are a lot of extra steps but it works for me if I really can't get cm7 to load (I've done this more then once)
Odin eb01 with the atlas 2.2pit and reboot fully when odin is done.
Pull battery...Odin cwm 3/30 fix all..and when that's done, install battery and 3 finger salute into recovery....wipe everything and flash com rom 2.0 and reboot.
This is where you may have to try different recoveries, putting com rom on your phone gives you root, recovery and voodoo. So from here if your recovery doesn't properly flash cm7 you can simply pull the battery re odin a different recovery and try again, as long as you don't try to reboot the phone.
Make sure you are using the 7/17 build from, jt's pretty much official cm7 Thread, not the nightly. even if this is not what you want it should properly get you to mtd format, so another rom on an mtd build can just be flash the good old way.
I've had the cwm4.x.x.x work fine and then today it would not work after I flash a different kernel with out wiping anything...oops! I've had 3/30 fix all cwm give me the best results but even today would not work.
What did work was using the com rom recovery to flash times infinity's purple recovery zip...reboot recovery into the purple one, and then wipe everything and flash cm7 7/17...ugh finally! Once I was there just power button menu... reboot recovery to install gapps, and glitch. You could at this point wipe cache and dalvik and flash nightly if you wanted...hope some of this helps.
Sent from my SCH-I500 using XDA App
I've had the same problem tryin to flash all mtd based roms...it always sticks at the samsung logo when I three finger back to recovery. I get the error logs aswell...**** sucks lol. That's odining ed05, fully boot, odin cwm 4 fix for cm7, boot recovery, wipe data,cache, dalvick, install rom.zip, all for a samsung logo and log error lol. So instead of spending 5hrs trying to flash a rom, I spent 10min and flashed power wash ed05, works great!

[Q] Boot loop.. cannot reach recovery menu

I am sure, this has been posted somewhere, but am new to this forum and cannot find it. please bear with me.
I installed CM7 on my Galaxy ace and tried to restore back to stock ROM. the restoration failed, the phone is now in a bootloop (the samsung logo flashes once every two seconds). I tried getting the phone into recovery mode but it does not get that far.
However, I am able to get the phone to download mode and tried loading the stock 2.3.3, 2.3.5 ROM via ODIN. Both times, ODIN passed the installation. but my phone has not improved. can anyone please help?
PS: consider me a beginner.
after flashing from odin go to recovery and do full wipe
madman_amit said:
after flashing from odin go to recovery and do full wipe
Click to expand...
Click to collapse
I wish I could do that. My phone does not get that far.. it restarts before that. Can I do this from the PC anyway?
Search clockwork mod recovery that has 205mg its flashable via odin
Try to flash this http://forum.xda-developers.com/showthread.php?t=1121192
Flash it with odin choose it as pda
might say aint compatibile but flash anway
yeah. just tried that. I downloaded the file and chose that as PDA and flashed my phone with odin.. I am still getting the same problem. I guess, the warranty is void since I installed CM7.. so what to do now?
well before giving up you could just let it do its thing for like an hour and see what happens...
Sent from my GT-S5830 using xda premium
Flashed a full package ROM ?
Herpderp Adreno + Tegra.
Wait from where did you downloaded firmware snd which version of odin did you used.
Sent from my GT-S5830 using xda premium
the same happened to me also.
in the past i've flashed my ace with cm7 and wanted to go back to the stock rom.
flashed the stock rom with odin but the phone stuck in a boot loop.
if you have flashed stock rom with odin..
do this..
remove the phone batteries and let them out for a minute.
after that insert the battery again and goto the Recovery mode by holding the power and the home button.
once you are in recovery (Clockworkmod Recovery).
do a data/factory wipe.
a cache wipe
and a Dalvik Wipe.
and reboot the phone.
hope you phone boots normally.
Am using ODIN version 4.38.
downloaded the original CM7 version from this site ported by grif (Kooper Kang something).
When I had problems with that, I tried to revert to Stock rom 2.3.3 from sammobile.com
To answer other question, I am NOT able to go to the recovery menu. Hence cannot wipe cache, reset etc. The phone restarts before that. The only mode I am able to switch on is the Download mode. Even if I reload the ROM with ODIN showing a "PASSED" at the end of the process, my phone is still a brick.
Thanks to everyone who tried to help.
Seriously, I've seen this before. It can only be fixed by the service centre... flash the stock rom and take it in under warranty if you still have it.
Sent from my GT-S5830 using xda premium
-SGA- said:
Seriously, I've seen this before. It can only be fixed by the service centre... flash the stock rom and take it in under warranty if you still have it.
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Wrong, after flash the stock rom with ODIN take battery, insertt battery, the keep pressed Home button and Power button until it goes to Samsung Recovery, then do the full wipe and reboot.

[Q] Challenge? Help revert to stock without home button working.

So I know search the forums before making a thread and trust me I have.
I have looked through the following threads and they have helped but weren't able to get me to where I need to be.
SGS2 Bell/Virgin Canadian Thread Q&A (Root/Unlock/Firmware) Modems/Mod
http://forum.xda-developers.com/showthread.php?t=1193695
[READ THIS] Got a Boot Loop? Don't post a New Thread!
http://forum.xda-developers.com/showthread.php?t=1108499
what happened
-Home button is non responsive
-tried to revert back to previous rom CM9-CM7 to see if it was a software issue but got into a bootloop.
-Can't wipe user data anymore in recovery due to no home button functionality
I need to revert to my stock so I can get my home button fixed. Yet can't find a way that works due to not being able to wipe data as recoveries generally use the home button to make selections.
I do have a usb jig and can put the phone in download mode.
Does anyone have any advice or suggestions at all.
Basically I need to somehow wipe data through recovery without the home button and then download stock all without using the home button.... >.>
I am running villianrom1.1 because it was one of the only things I could find that auto wipes data to bypass the boot loop and don't have clockworkmod recovery.
Any help suggestions or advice is greatly appreciated!
Since you can get to download mode have you try using odin to flash back to bell 2.3.3?
Well I tried reverting back to stock already. I get into a boot loop due to not being able to wipe
Do you gave CWM installed? If so, use CWM Manager icon in the app list to boot into recovery.
Edit. Sorry, just read your last sentence. Hmmm, not sure now
Sent from my GT-I9100 using XDA App
Fix?
Try downloading lolboot with it u get to recovery when u plug a USB cable in the phone
the try wiping and deleting all cache
BTW: why dont u download clockworkmod?
I can boot into recovery via clock work mod but my recovery doesn't allow for data wipe without home button. Can't select options with power button only home
would mobile odin help.
Sent from my GT-I9100 using XDA App
Dextherex said:
I can boot into recovery via clock work mod but my recovery doesn't allow for data wipe without home button. Can't select options with power button only home
Click to expand...
Click to collapse
From this thread flash a wipe rom via odin, that will factory reset and wipe everything from the phone, a clean slate if you will.
veyka I have tried to flash my stock rom before and it didn't work. How do those differ and if I do flash them will I be able to flash it after flashing one of those?
Dextherex said:
Well I tried reverting back to stock already. I get into a boot loop due to not being able to wipe
Click to expand...
Click to collapse
An Odin flash should boot. Try finding a 3 part file with pit and tick repartition. Many say to avoid repartition but I've never had any problems. I've never had to wipe my phone when using Odin. Seems like you are flashing a no-wipe version. So maybe also check that its a wipe version (1 part or 3 part file).
Sent from my GT-I9100
A full wipe rom via Odin will work. Another choice but takes more work would be to boot into recovery then use adb to wipe data from the command line.
I can't think off hand what commands to type into adb to do it though.
Maybe try wiping using dialer code *2767*3855#
Sent from my GT-I9100 using XDA App
Install CM recovery First
Here are the steps:
1) Install CM Recovery using Heimdall Suite.
http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_II
It will be full wipe.
2) Install stock ROM through ODIN.
It will definitely work.
hey,
is there anyway you can explain the steps in more detail.
Thanks for your help

[Q] Broken recovery, bad kernel, and id10t error

Last week I flashed LD3 for my Galaxy S2 i777. Today I was going to flash CM9. Every time I tried to boot into recovery it just started the phone.
I figured I could use mobile odin to flash a new kernel and it would fix it. Like an idiot I used a Gingerbread kernel on my phone running an ICS rom. So of course my phone froze on the "Galaxy S2" screen.
I couldn't boot into recovery and freaked out because I couldn't boot into dl either. I ordered a jig but kept fiddling in the meantime. I found that if I hook my phone to the USB, wait for the battery charging icon, take the battery out, then hold the down button it would boot into dl mode. Then I had to put the battery back in before I clicked continue or else it just reset.
Ok, so got into DL mode. I grabbed the stock rom and kernel from XDA site and flashed them with Odin. http://forum.xda-developers.com/showthread.php?t=1286432 (can't post links yet).
The phone starts and setup mode begins. It shows the android figure and says click it. Now all kinds of errors pop up telling me different google services weren't working and force close. When you click the android figure it goes to setup wizard screen but nothing happens (except more android service errors).
Can someone help me out here? I've been at it 5 hours and searched this forum high and low. My thought is there are some ICS elements left behind in there it is trying to load, but I could be way off.
I still can't boot into recovery mode, just DL.
PenguinSpark said:
Last week I flashed LD3 for my Galaxy S2 i777. Today I was going to flash CM9. Every time I tried to boot into recovery it just started the phone.
I figured I could use mobile odin to flash a new kernel and it would fix it. Like an idiot I used a Gingerbread kernel on my phone running an ICS rom. So of course my phone froze on the "Galaxy S2" screen.
I couldn't boot into recovery and freaked out because I couldn't boot into dl either. I ordered a jig but kept fiddling in the meantime. I found that if I hook my phone to the USB, wait for the battery charging icon, take the battery out, then hold the down button it would boot into dl mode. Then I had to put the battery back in before I clicked continue or else it just reset.
Ok, so got into DL mode. I grabbed the stock rom and kernel from XDA site and flashed them with Odin. http://forum.xda-developers.com/showthread.php?t=1286432 (can't post links yet).
The phone starts and setup mode begins. It shows the android figure and says click it. Now all kinds of errors pop up telling me different google services weren't working and force close. When you click the android figure it goes to setup wizard screen but nothing happens (except more android service errors).
Can someone help me out here? I've been at it 5 hours and searched this forum high and low. My thought is there are some ICS elements left behind in there it is trying to load, but I could be way off.
I still can't boot into recovery mode, just DL.
Click to expand...
Click to collapse
Did you do a full wipe before flashing the stock rom and kernel?
I did not do a full wipe. How can I go about that without logging into recovery? I'm googling that now but if you have linkage I would appreciate it.
mattdm said:
Did you do a full wipe before flashing the stock rom and kernel?
Click to expand...
Click to collapse
dont need to wipe when using Odin/Heimdall.
To OP:
there is only factory recovery, no CWM, you could always just flash a kernal from the DEV section, get CWM, flash CM9.
If I flash another kernel wouldn't I still have the same problem? I'll go ahead and give it a shot. Any you recommend for any reason or other?
PenguinSpark said:
If I flash another kernel wouldn't I still have the same problem? I'll go ahead and give it a shot. Any you recommend for any reason or other?
Click to expand...
Click to collapse
So let me get the straight...you're on unrooted stock right now? If that's true, you should:
1. Do a factory reset from settings.
2. Use Odin to flash the Stock with Root package.
3. Use Mobile Odin to flash either Entropy's DD or Siyah.
4. Use CWM to flash what you want after that.
PenguinSpark said:
If I flash another kernel wouldn't I still have the same problem? I'll go ahead and give it a shot. Any you recommend for any reason or other?
Click to expand...
Click to collapse
recovery is in kernal. If you flash a kernal from the DEV section you'll get CWM recovery, then you can flash your CM9 that you wanted, after a wipe data/factory reset.
MotoMudder77 said:
recovery is in kernal. If you flash a kernal from the DEV section you'll get CWM recovery, then you can flash your CM9 that you wanted, after a wipe data/factory reset.
Click to expand...
Click to collapse
Yes, but if he flashes said kernel with Odin, it'll trip his flash counter. I'm just telling him the safe way to do it, Mobile Odin.
I've already tripped my counter. I have a jig that will be here tomorrow so I can use it to reset the counter.
I can't use mobile odin because I can't log into my phone. I can only use desktop Odin.
All the files I am digging up look like .zip made for cwm. Could someone help guide me towards a kernel I can flash from desktop?
PenguinSpark said:
I've already tripped my counter. I have a jig that will be here tomorrow so I can use it to reset the counter.
I can't use mobile odin because I can't log into my phone. I can only use desktop Odin.
All the files I am digging up look like .zip made for cwm. Could someone help guide me towards a kernel I can flash from desktop?
Click to expand...
Click to collapse
Either Entropy's DD or Siyah. You can open the zip and extract the zimage; the zimage is the kernel.
I just tried using Syiah:
http://forum.xda-developers.com/showthread.php?t=1367800&highlight=cf-root
I still get this message:
"The process android.process.acore has stopped unexpectedly. please try again"
I can't get past the setup screen.
And I still can't access recovery.
PenguinSpark said:
I just tried using Syiah:
http://forum.xda-developers.com/showthread.php?t=1367800&highlight=cf-root
I still get this message:
"The process android.process.acore has stopped unexpectedly. please try again"
I can't get past the setup screen.
Click to expand...
Click to collapse
you flashed siyah kernal, booted into recovery, wiped data, and reflashed and are still getting this?
I can't boot to recovery
PenguinSpark said:
I can't boot to recovery
Click to expand...
Click to collapse
Flash the return to stock package from Odin again. Something must have gone wrong with it the first time.
well thats wierd. Sorry man but are you doing it right?
vol down and power. hold it untill the screen flashes twice.
I flashed stock 3 times now. I couldn't get into recovery before this (manually or with rom manager) and still can't. It starts like its going into recovery then just resets and loads normally.
Down is for dl mode, up is recovery.
I think the lack of ability to boot into recovery and the android service errors may be related.
PenguinSpark said:
I flashed stock 3 times now. I couldn't get into recovery before this (manually or with rom manager) and still can't. It starts like its going into recovery then just resets and loads normally.
Down is for dl mode, up is recovery.
I think the lack of ability to boot into recovery and the android service errors may be related.
Click to expand...
Click to collapse
Forget recovery. You shouldn't be worrying about recovery until after you get your phone booting.
New thought: maybe your download of the stock package is corrupted. Try to download it on your computer again. Download the one with root. If that fixes it, you can go use Mobile Odin to flash the Siyah kernel.
To get into recovery hold down both volume up, volume down, and power button and don't let go until recovery comes up.
Sent from my SAMSUNG-SGH-I777 using XDA
I have been using the rooted. The fully stock won't dl. This started because I flashed a gb kernel instead of ics. Maybe I should try flashing an ics kernel instead of stock gb?

[Q] Flashing with Odin questions

OK, so my plan is to Flash my USA Galaxy Player 5.0 with Entropy's Kernel and Chip v1.5 ROM, and I think I've got the general idea down (first time at this, so this is still new and scary):
1) Backup data (Already done)
2) Factory Reset to clear out everything
3) Use Odin3 v1.7 to Flash Entropy's Kernel
4) Use Odin3 v1.7 to Flash Chip v1.5
5) Enjoy newly improved Galaxy Player, and begin the re-install process for all my apps.
The questions I have that I cant seem to get straight:
1) In the How To Flash with Odin/Heimdall tutorial, it says to use the .tar file for the ROM/Kernel. On Entropy's Kernel page, it has downloads for a .tar from back in January of this year, and a .zip from March. It looks like the march one is the latest updates, but how do I use them/install from a zip? I notice the instructions directly above the install, but as far as I can tell, there isn't a way to use CWM for the Galaxy Player. My Player is rooted, should I just go with the 'Any rooted device' instructions, using the .zip? Will that work for a first time?
2) Chip's instructions recommend re-installing the kernel again after flashing his mod. Has anyone found this advice helpful? If so, should I try using Odin to do it or the terminal emulator?
3) I want to re-install Swype and some of the default stuff after installing Chip v1.5, thus Addon Pack 1 is needed. Again, it says flash with CWM, and it's a zip file...
That's all I can think of right now. I know I'm being overcautious, and after the first time or two I won't think hardly anything of these details I'm asking for, but for right now I'd really appreciate any help I can get!
the only thing i used odin (make sure youre in download mode of course) for was to flash entropys .tar file (DD_01142012.tar) which now lets you have cwm recovery on your device. and then i rebooted put entropys DD_03052012.zip onto my sdcard, and i also put chip1.5-1-signed.zip onto sdcard in same spot. then i rebooted into cwm mode by powering off and then holding power and vol+ button together till u see first samsung screen then let go of power button but not vol+button, when u see cwm menu then u can let go. then i scrolled down to 'install zip from sdcard' and click on it and goto the DD_03052012 first and install that, once thats finished, then i installed chips rom, and did entropys kernel again (just in case he says) then just reboot from the cwm menu. dont forget to make nand backup after you have chip installed just in case, or even make a nand backup before chip installation, or both its up to u, i did both just cuz. :highfive:
So everything looked like it was going good, then I got into a boot loop right after I installed Chip v1.5. I'm trying to go through the instructions to fix that now, but before that everything was nice and easy. Thanks for your help!
Did u do a wipe data and clear caches before chip? If u haven't then do it now and reinstall everyhing
Sent from my YP-G70 using xda app-developers app
For those who might be reading this in the future, to clear the boot loop I used the instructions here, which got my Player back to factory settings (it was more of a hassle to download the recovery ROM than it was to actually restore the Player). I re-tried installing, got boot looped again, then went to CWM ->Advanced ->Clear Delvik Cache . I remembered seeing this in the other instructions, I just mistook it for deleting the normal cache/data. Once I deleted it things worked fine, and things are looking good so far!
Moral of the story: Installing custom ROMs is easier than you think, although there are some little things that might trip you up for a little bit.
Dr. Cyanide said:
So everything looked like it was going good, then I got into a boot loop right after I installed Chip v1.5. I'm trying to go through the instructions to fix that now, but before that everything was nice and easy. Thanks for your help!
Click to expand...
Click to collapse
Whipe everything and dalwick cashe also..and then wait ,first boot is always longer because its formating cashe.
But if you dont have cwm and you want to flash some kernel which is in boot.img format packed in zip (i had few situations like that when i could not enter cwm ) since SGP dont have fastboot mode only way to flash it is try Odin ,download samsung note 2 tools (find it on xda ,there is thread for that) and with that tool you can convert .img to Tar ,just before conversion you rename boot.img in to zImage ..after it creates tar you can flash it with odin normaly ( add in pit section)
Sent from my Nexus 7 using xda app-developers app
I'm fairly certain you flash .tar files with odin, and .zip files in clockworkmod recovery. If you need cwm, you can flash a custom kernel with it installed already through odin. Try terrasilent or steve's kernel if you have the 4.0, for the 5.0 I'm not sure.
flashing cm 10.1 with odin, can i and how
[can anyone answer this question for me, I have the vibrant t959 and my power button is dead. I can use my phone all works fine but what I cant do is flash rom with cw cause of the power button. is their a way to flash cm 10.1 with odin or other way that u don't need a power button?
please help

Categories

Resources