Hi guys i have stange problem here i can not flash i9300 with odin alwasy get fail when it starting to flash sestem file
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
can some one tell me what to do?
mps5566 said:
Hi guys i have stange problem here i can not flash i9300 with odin alwasy get fail when it starting to flash sestem file
can some one tell me what to do?
Click to expand...
Click to collapse
Try re-installing the USB driver. or Try it in a different computer.
Get Odin v1.85.
Sent from my GT-I9300 using xda premium
nodstuff said:
Get Odin v1.85.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
already try with 1.85 no luck already try with different pc still same i can flash another s3 but i can not flash this phone.
Start .
One what firmware on the phone .
Two what firmware are you flashing .
Three is the phone SGS3 International I9300 .
Four have you tried re download of firmware .
jje
1-stop kies (if it is installed) before trying to use odin
2-try reinstalling the USB drivers
3-try with the stock SGS3 USB cable if you tried with another cable
4-try on another USB port on your computer
5-try on another computer
If none of this work, it seems that your phone has a R/W corrupt NAND and you will probably never be able to flash it
Maybe you need to turn on USB debbuging in phone settings.
Wysyłane z mojego GT-I9300 za pomocą Tapatalk 2
Mopral said:
1-stop kies (if it is installed) before trying to use odin
2-try reinstalling the USB drivers
3-try with the stock SGS3 USB cable if you tried with another cable
4-try on another USB port on your computer
5-try on another computer
If none of this work, it seems that your phone has a R/W corrupt NAND and you will probably never be able to flash it
Click to expand...
Click to collapse
Actually, I'd recommend one to completely uninstall KIES, since it is utterly worthless. It is possible to uninstall KIES but keep the drivers.
JJEgan said:
Start .
One what firmware on the phone .
Two what firmware are you flashing .
Three is the phone SGS3 International I9300 .
Four have you tried re download of firmware .
jje
Click to expand...
Click to collapse
Mopral said:
1-stop kies (if it is installed) before trying to use odin
2-try reinstalling the USB drivers
3-try with the stock SGS3 USB cable if you tried with another cable
4-try on another USB port on your computer
5-try on another computer
If none of this work, it seems that your phone has a R/W corrupt NAND and you will probably never be able to flash it
Click to expand...
Click to collapse
Simonetti2011 said:
Actually, I'd recommend one to completely uninstall KIES, since it is utterly worthless. It is possible to uninstall KIES but keep the drivers.
Click to expand...
Click to collapse
I dont know what firmware in the phone before customer bring phone like this.customer just saying he was just taxing and after he put in charge and he woke up and and finds out his phone saying Encryption failed
Code:
Encryption failed
Unable to complete encryption due to on interruption,perform factory data reset(erasing all your data )before use,After resting try encrypting device again
i m trying to do hard reset but wont let me do.
i try few different pc no luck with kies without kies same error.
He set phone encryption in settings and process has been interrupted or there was some errors while encrypting.
This procedure takes a while, even few houers. If phone will be rebooted by user or by power loss (weak battery) encrypion will fail in half way.
You should try to Initialize phone to factory default system by Kies. You need seril number and device name. GT-9300 in this case. Kies will check Samsungs database and try to restore original firmware, also branded. Kies will try to repartition to stock layout, format and flash this firmware.
This option is somwhere in Kies menu, tools if I remember.
If its fail than only option left is try Odin, 3 files firmware, mx.pit and repartition check while flashing.
Wysyłane z mojego GT-I9100 za pomocą Tapatalk 2
SirKunon said:
He set phone encryption in settings and process has been interrupted or there was some errors while encrypting.
This procedure takes a while, even few houers. If phone will be rebooted by user or by power loss (weak battery) encrypion will fail in half way.
You should try to Initialize phone to factory default system by Kies. You need seril number and device name. GT-9300 in this case. Kies will check Samsungs database and try to restore original firmware, also branded. Kies will try to repartition to stock layout, format and flash this firmware.
This option is somwhere in Kies menu, tools if I remember.
If its fail than only option left is try Odin, 3 files firmware, mx.pit and repartition check while flashing.
Wysyłane z mojego GT-I9100 za pomocą Tapatalk 2
Click to expand...
Click to collapse
Thanks for ur reply i can not connect wit kies so only option is odin 3 file can u plz give me link for 3 file so i can try to flash and check it out?
thanks again
https://hotfile.com/dl/158814567/30ec3bc/GT-I9300_XEO_I9300XXALEF_I9300OXFALEA_I9300XXLEF.rar.html
It is XEO (Ost Europe) version but if flashing will be succesfull than you may flash anything you want after that. Only csc or whole newest one file firmware.
Look also at this thread:
http://forum.xda-developers.com/showthread.php?t=1796062
You must be aware that partitionning is not recommended. There is always small chance to screw something but in this case it seams like your last hope.
Personally I never had any problems with .pit (sgs, sgs2,sgs3), but s**t happens.
Wysyłane z mojego GT-I9100 za pomocą Tapatalk 2
SIRKUNON the option you suggested, doesent worked in my gt-i9300, my s3 freezes then reboot i cant turn on the debugging mode because it freeze then reboots, if i try to hard reset it via recovery mode, it only restart but nothing changes. so im trying to flash a new stock firmware but no luck, i also tried flashing with a 3 part file rom but still no luck. HELP ME PLEASE.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALEF_611327_REV00_user_low_ship.tar.md 5 is valid.
<OSM> MODEM_I9300XXLEF_REV02_REV04_CL1147871.tar.md5 is valid.
<OSM> CSC_OXE_I9300OXEALE4_CL606160_REV00_user_low_ship. tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Try one more thing, set mx.pit as pit check repartition an UNCHECK autoreboot. Flash only pit. If it finish with success dont reboot your phone and do not disconnect it from Odin. Set this time pda, modem and csc (without repartition) and try to flash.
If it fail than its mean propably damaged nand and only service center will help (maiboard replace).
There is an option to flash only param.fs file as pda but i never tried this metod.
Wysyłane z mojego GT-I9300 za pomocą Tapatalk 2
thanks for your reply,
do i need to check the f.reset time?
SirKunon said:
Try one more thing, set mx.pit as pit check repartition an UNCHECK autoreboot. Flash only pit. If it finish with success dont reboot your phone and do not disconnect it from Odin. Set this time pda, modem and csc (without repartition) and try to flash.
If it fail than its mean propably damaged nand and only service center will help (maiboard replace).
There is an option to flash only param.fs file as pda but i never tried this metod.
Wysyłane z mojego GT-I9300 za pomocą Tapatalk 2
Click to expand...
Click to collapse
Pit file could help when odin does not see the pit directly from the phone (and needed if you want to make repartition)
This does not seems to be the issue here...
Problem is that partitions are partially encrypted and unreadable (odin is reporting error when trying to start flashing firmware to nand). Repartitioning restores the default layout. After that partition should be formated to zero all data (only file table) to virgin state.
I'm not sure it will decrypt nand but its worth a try, doesn't it?
***
F.reset can be selected but not necessary while only pit flashing.
Wysyłane z mojego GT-I9300 za pomocą Tapatalk 2
it fails. (mx.pit)
its very expensive if i change m.board.
so im trying very hard to fix my s3
is there any solution left that im able to try?
help me pls thanks guys
---------- Post added at 02:54 PM ---------- Previous post was at 02:49 PM ----------
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
doimendoza said:
it fails. (mx.pit)
its very expensive if i change m.board.
so im trying very hard to fix my s3
is there any solution left that im able to try?
help me pls thanks guys
---------- Post added at 02:54 PM ---------- Previous post was at 02:49 PM ----------
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Probably not relevant but try it anyway. Open task manager and click PROCESSES and search through so all KIES apps are closed (KIESPDLR KIESTRAY) etc and try again.
mps5566 said:
Thanks for ur reply i can not connect wit kies so only option is odin 3 file can u plz give me link for 3 file so i can try to flash and check it out?
thanks again
Click to expand...
Click to collapse
Yew may fnd 3file n sammobile.com
jje
Related
Hy all!
First sorry for my bad english, coming from swizerland and had only one year english ;o)
I dont wona make a double post, becouse i have postet my problem on an other thread but only one aswered me, but he can`t help me anymore.
My problem starts on page 2 post nr.15 on this thread : http://forum.xda-developers.com/showthread.php?t=2120749&page=2
Maybe an admin can close this thread that no ones answeres here, (they should answere on the other thread.
Or can i close this?
Thx for help!
wdani said:
Hy all!
First sorry for my bad english, coming from swizerland and had only one year english ;o)
I dont wona make a double post, becouse i have postet my problem on an other thread but only one aswered me, but he can`t help me anymore.
My problem starts on page 2 post nr.15 on this thread : http://forum.xda-developers.com/showthread.php?t=2120749&page=2
Maybe an admin can close this thread that no ones answeres here, (they should answere on the other thread.
Or can i close this?
Thx for help!
Click to expand...
Click to collapse
If you have no backup of the EFS folder to restore you have to have it repaired in a service center. That is the only solution. EFS contains critical data that enables the phone to access networks etc etc. So take it to the shop you bought for a motherboard replacement. This however will cost you an arm and a leg if not done under warranty (about 300 euro)
gee2012 said:
If you have no backup of the EFS folder to restore you have to have it repaired in a service center. That is the only solution. EFS contains critical data that enables the phone to access networks etc etc. So take it to the shop you bought for a motherboard replacement. This however will cost you an arm and a leg if not done under warranty (about 300 euro)
Click to expand...
Click to collapse
thx for answer, but i have a backup of the EFS, thats becouse i need help how i can restore it...
ok i post no everything what i have done in the other thread:
Hi all!
Thats my first post, i comming from swizerland, and my english is not good!! sorry for that! :angel:
I think i have the same problem but a bit difrent. i have translate my question with google hope that works and you understand it:
Hi all.
'm New here, please little indulgence if I'm doing something wrong: o)
Have unfortunately a boat trailer in the process
Mobile: Galaxy S3
Wanted to put on my cell phone that is flashed via odin this new FW:
I9300XXELL4_I9300AUTELK2_I9300XXELL4_HOME.tar.md5
Everything without problems, CF root on it, not a problem.
Then Triangle instaled away, not a problem.
I saw the EFS should secure their first choice, this Ktool downloaded (play store).
backed up, but nothing was available (I think becouse partion is named "sdcard0" and not "sdcard" (??))
Ok then I have a root folder app downloaded wanted sdcard0 change in sdcard but dosn`t work..
Then I wanted to check Ktool, the difrent funtions and am accidentally come to "ESF format" (in german "format is like *avi*, *mkv* *wmv*and have also confirmed this ..
Result -> phone stops at the boot logo.
New flash via Odin tried but without success.
factory reset and reset cache on Recovery also without success.
Half the south death I think I'm not. Since model name in the download mode available.
Luckily I have a backup of EFS i think from omega rom on my sd ext:
efs_01Oct2012-1028.tar.gz
when i open it with 7zip i have that: efs_01Oct2012-1028.tar
open it again then that :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can i flash it with Odin? when yes where must i put it in? "PDA" , "CSC" , "PHONE" ?
I'm not sure if it can helps you, but it worth to have a try.
2nas.com
Provides :
1: Integrates Unbrick / Flash ROM / Root All-In-One.
2: Use the same protocol as ODIN, but 2nas is more user-friendly and easy-to-use.
3: Cloud based database to flash your android phone with correct files(ROM, etc)
4: Automatically download necessery files to flash, and check them with SHA1, it's safe for your phone.
5: Store all downloaded files in local disk, under a good directory structure, it's usefull when you have several phones.
Click to expand...
Click to collapse
I tried that out but become that:
In recovery I can`t mount my sdcard (maybe because its named sdcard0?)
Edit: installed from internal_sd and external card I can choose.
i hope i said the most usful to help me .
and sorry for my english!! (half is from google )
thx and gretings from swizerland
EDIT: Okey i have flashed now 3part firmware with pit file : I9300XXALE8_I9300OJVALE7_OJV now i can boot!!! ....but only boot... now i ned help to fix my EFS ;o)
Click to expand...
Click to collapse
thx IRPnet for your post!
but problem is now, after the "working" firmware i have flashed an other firmware "german" and after that... again bootloop!! :crying:
no i have trided difrent 3 parts firmware with pit file (GT-I9300_mx_20120329 and GT-I9300_mx_20120322) with odin3 v1.85, Odin 3 v3.04 and Odin 3 v3.07 but dosend work.
on this firmware : "I9300XXALE8_I9300OJVALE7_OJV" with Odin3 3.04 and GT-I9300_mx_20120329.pit i have that fail :
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALE8_554452_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXLE8_REV02_REV04_CL1145430.tar.md5 is valid.
<OSM> CSC_OJV_I9300OJVALE7_CL547448_REV00_user_low_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> sboot.bin
<ID:0/010> NAND Write Start!!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<ID:0/010> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
when i want to flash that : I9300XXDLJ5_I9300XXDLID_I9300DBTDLI2 with same pit and same Odin that :
<ID:0/010> Added!!
<ID:0/010> Removed!!
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> boot.img
<ID:0/010> NAND Write Start!!
<ID:0/010> param.bin
<ID:0/010> recovery.img
<ID:0/010> sboot.bin
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<ID:0/010> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
...
i have also that firmware from this tread: I9300XXELLA_KOR_MULTI_FACTORY
this is inside :
BOOTLOADER_I9300XXELLA_742798_REV00_user_low_ship.tar.md5
CODE_I9300XXELLA_742798_REV00_user_low_ship.tar.md5
CSC_I9300OXAELLA_742798_KOR_FACTORY_user_low_ship.tar.md5
MODEM_I9300XXELLA_742798_REV00_user_low_ship.tar.md5
mx.pit
Click to expand...
Click to collapse
i can flash that! but it dosent start (after boot its doing some things with the little android men and the "samsung galaxy s3" is coming but nothing else... )
i could cry... dam it.... need al the help...
Edit: Coult it be my phone dosn`t boot becouse the "efs" is lost?....
Click to expand...
Click to collapse
IRPnet said:
After you have used Odin, are you going going into recovery and doing a wipe?
You need to WIPE/FACTORY RESET and then WIPE CACHE.
Your phone should then boot up
Try that, let me know how you get on.
I'm no expert on these things, so if someone else wants to join in this thread...feel free.
I can only relate to my experience. Although your experience does sound similar.
Click to expand...
Click to collapse
after wipe/factory reset shoult i restart to recovery or do the wipe cache without reboot to recovery?
i doing that without reboot to recovery but no chance... still the same...
in recovery it also says : E:failed to mount /efs (Invalid argument) --> like i said.. no efs in my phone..
Click to expand...
Click to collapse
IRPnet said:
You can do both at the same time. It should then reboot.
Don't worry about the error...that will show until you got it recovered.
You've got to get the phone booting correctly before you can restore the EFS partition from your backup.
Once the phone boots up, you may find that with your SIM inserted you get no phone signal - it might even say that you have no SIM inserted. You will also not be able to get Wifi. Thats why you need the apk's for the software I mentioned on your external SD card.
Now, if you know how to use adb you can push them with that (if you know how, I don't).
If the phone boots correctly, your PC should see it and you SHOULD be able to copy files.
Thats the important part.
Click to expand...
Click to collapse
thats the big problem my phone dos not boot... i tried like you said wipe data and cache but the phone dos`t boot...
Click to expand...
Click to collapse
okey that was all... thx for help! :good:
is there no one how can help me? ..
is it realy posible that no one can help me?? .... i am on the best developer forum and no one can help me?....
i wona have my galaxy s3 back to life!!... :crying:
This is a developers forum not a fix my phone forum.
You dont follow rules bumping and fail to search.
This question is well posted if you cannot be bothered to help yourself then neither can I .
jje
Sent from my GT-N8010 using xda premium
JJEgan said:
This is a developers forum not a fix my phone forum.
You dont follow rules bumping and fail to search.
This question is well posted if you cannot be bothered to help yourself then neither can I .
jje
Sent from my GT-N8010 using xda premium
Click to expand...
Click to collapse
yes i know that a developers forum. but its also a "Help & Troubleshooting", not?
whith rules do you mean?...
i have searched (but like i said my english is not good maybee i shoult take other words to search but dont know the word...)
i have tried to make a easy good title, easy to understand what the problem is.
tried to post a good informative question...and not a short one with less info..
if i have broke a rule, sorry for that but like i said i`m new here and its not becouse i wont search.. or dont wont (solv?) the problem myself.
i tried it evry time today tryied flashed that firmware :
I9300XXDLJ4_I9300OXADLJ4_I9300XXDLID
Click to expand...
Click to collapse
but like ever no luck...
Use dd command.
Flash with CF-root
backup efs partition on good i9300
Code:
dd if=/dev/block/mmcblk0p3 of=/sdcard/mmcblk0p3.bin
then restore
Code:
dd if=/sdcard/mmcblk0p3.bin of=/dev/block/mmcblk0p3
krhyan2 said:
Use dd command.
Flash with CF-root
backup efs partition on good i9300
Code:
dd if=/dev/block/mmcblk0p3 of=/sdcard/mmcblk0p3.bin
then restore
Code:
dd if=/sdcard/mmcblk0p3.bin of=/dev/block/mmcblk0p'
Click to expand...
Click to collapse
do i understand that right, I need an other galaxy s3?
i dont understand becouse i have a backup from the efs, that dosn`t work?
and sorry, don`t understand the comands you have write, i am a bit noob ;o)
i have a galaxy s3..
The android version was 4.0.3
I wanted to renew the version to 4.1.2 so i downloaded the stock british ROM4.1.2
I opened ODIN and put the md5 file in PDA and conected the PHONE into the computer (DoWNLOAD)
afet clicking START it was kind of stuck on BOOT.img and FAILED. I disconnected the phone and he worked...
i tried another version and a blue line started to apper in the DOWNLOAD MOD but it STUCKED again.. so i disconnected the phone and now i have the messege: "FIRMWARE UPGRADE ENCOUNTERED AN ISSUE.PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN"
what should i DO ?? i can only gen into download mode
What guide were you following? Did it say to put the firmware into "pit"?
Considering you have no idea what you're doing, it's unlikely you'll manage to fix this by yourself.
Short answer: flash the correct pit file
Glebun said:
What guide were you following? Did it say to put the firmware into "pit"?
Considering you have no idea what you're doing, it's unlikely you'll manage to fix this by yourself.
Short answer: flash the correct pit file
Click to expand...
Click to collapse
oh sorry i meant PDA ...
So you only flashed the pit file without the actual Firmware?
You really need a guide to not screw things up here now.
If download mode is working, good.
What files do you have in your firmware zip file. I mean there can`t be only a Pit file.
List all files here detailed.
Edit:
So there was only one File? and you put it in pda?
If yes that should be correct.
What Galaxy S3 do you have? The international one? I9300 ?
Also provide a link from where did you download the Firmware?
http://forum.xda-developers.com/showthread.php?t=1978840
Then try reading the basics before flashing anything .
Ignorance = a brick .
jje
1. tell us where exactly you got the firmware
2. read the product name under the battery. is it I9300?
Scarface1991 said:
So you only flashed the pit file without the actual Firmware?
You really need a guide to not screw things up here now.
If download mode is working, good.
What files do you have in your firmware zip file. I mean there can`t be only a Pit file.
List all files here detailed.
Edit:
So there was only one File? and you put it in pda?
If yes that should be correct.
What Galaxy S3 do you have? The international one? I9300 ?
Also provide a link from where did you download the Firmware?
Click to expand...
Click to collapse
YES i have I9300.
I have downloaded this:
write this on google: hotfile I9300XXELLA_I9300OXAELLA_BTU.zip
the first link
sorry for the split... XDA don't allow me to post "outside links"
take the battery out and confirm you have an i9300.
provide an Odin screenshot of the error
How many files are in the zip file?
taltalm3 said:
YES i have I9300.
I have downloaded this:
write this on google: hotfile I9300XXELLA_I9300OXAELLA_BTU.zip
the first link
Who on earth knows what file that is from roomyshare.com . It could be good bad full of malware wrong file anything .
Download from a genuine source only .
jje
Click to expand...
Click to collapse
Glebun said:
take the battery out and confirm you have an i9300.
provide an Odin screenshot of the error
Click to expand...
Click to collapse
YES i have an I9300
I can't screenshot because it isn't happens it's just stuck
and this is what is wrote:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Scarface1991 said:
How many files are in the zip file?
Click to expand...
Click to collapse
2:
the MD5 file and
SS_DL.dll
Ok first download a firmware that is absolutely safe to use. You can use this site to do so or search here at XDA for a Firmware:
http://www.sammobile.com/firmwares/1/
XDA I9300 Firrmwares (Check the second post of that thread and search for your country):
http://forum.xda-developers.com/showthread.php?t=1646610
afterwards check how many files there are in the firmware zip and then use this guide to flash the firmware:
Intratech said:
1. Just download the firmware version you want from the second or third posts and extract the .tar or .tar.md5 file in the archive and save it somewhere
2. Reboot your phone to download mode.
To get download mode shut down the device. After it shuts off completely simultaneously press the Down volume key+ Home button + press the power button .
You should see a warning asking you to press volume up if you want to continue or volume down to cancel, press volume up. You are now in download mode!
3. Start Odin
4. Click on the PDA button and browse to the .tar or .tar.md5 file that you extracted in step 1
If the package has more than one .tar archive then they will be labelled with PDA, Phone/Modem and CSC. Just put them in the corresponding section of Odin
5. DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION.
Anyone ask about .pit file is a moron
Should look like this screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If the package has 3 files it should look like this:
Regardless of firmware version it's still the same methodology
6. Connect the USB cable and wait for the ID:COM section to turn yellow
7. Click start to flash
8. Do not disconnect the cable or turn off the device, it will reboot when it finishes.
Click to expand...
Click to collapse
My suspicion is that kies interrupted the flash.....Did you disable kies before the flash?
asked rruplow
Scarface1991 said:
Ok first download a firmware that is absolutely safe to use. You can use this site to do so or search here at XDA for a Firmware:
http://www.sammobile.com/firmwares/1/
XDA I9300 Firrmwares (Check the second post of that thread and search for your country):
http://forum.xda-developers.com/showthread.php?t=1646610
afterwards check how many files there are in the firmware zip and then use this guide to flash the firmware:
Click to expand...
Click to collapse
I did it and it stuck on SYSTEAM.img
what now? :crying:
slaphead20 said:
My suspicion is that kies interrupted the flash.....Did you disable kies before the flash?
Click to expand...
Click to collapse
yes
taltalm3 said:
I did it and it stuck on SYSTEAM.img
what now? :crying:
yes
Click to expand...
Click to collapse
Ok this is weird. What's the situation right now? Are you in download mode or is your phone still hooked up to the computer and it's stuck at system.img?
Sent from my GT-I9300 using xda app-developers app
Scarface1991 said:
Ok this is weird. What's the situation right now? Are you in download mode or is your phone still hooked up to the computer and it's stuck at system.img?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
FAIL
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELL4_I9300OJKELK9_I9300JKELK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
The same error is what I got. It was the service centre for my phone.
Sent from my GT-I9300 using xda app-developers app
Help someome please
Hi All,
My phone is GT I9300 International Version,
ROM Installed before incident: one of the latest (past month) CM 10.1 nightly builds.
Woke up this morning and my phone was in download mode and my screen was like this and it kept rebooting:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tried taking out the battery / reboot / connecting to usb problem persists the rom is not loading and bring you back to download mode with the white screen.
Tried to enter the following modes:
Recovery Mode: NO RECOVERY MODE, it enters back to the download mode.
Download Mode: when entering download mode the phone screen is black as it should be
Conclusion: DOWNLOAD MODE IS THE ONLY AVAILABLE MODE I HAVE !
So, i figured something probably have gone bad in the phone but it's fixable since i can still go into the download mode.
So i downloaded one of the stock roms from samsmobile and tried with odin
Odin 1.85/3.04/3.07 - Getting error messages:
every time i tried reflashing it has lost the driver connection and even though it showed "Added" in the ODIN sometimes it wouldn't pass the setup connection step, so everytime i had to reboot the phone in order for the connection to be properly initialized.
PDA file to flash -
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUFME3_I9300OJKFME1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
No Pit ? So i downloaded a PIT:
SGS3\GT-I9300_mx_20120220.pit - this one fits the i9300 with 16gb according to what i searched and off course the model i own.
here is the odin output
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
and that's it it was just stuck like this forever...
I should mention that i tried different USB ports or even computers (all win7 64 bit) also tried runnning it(odin) with windows xp sp3 compatibility
usually when you start download mode and odin has started already you would see some kind of a progress bar on the actual phone,
that was missing as well...meaning the phone didnt seem to respond so far to the odin although it did shows sign of connectivity.
does anyone have a solution for this issue ???
Flashing Pit can kill your phone ..
But looks like your PIT was damaged anyway .
Solution is a service centre repair or buy a new motherboard .
jje
JJEgan said:
Flashing Pit can kill your phone ..
But looks like your PIT was damaged anyway .
Solution is a service centre repair or buy a new motherboard .
jje
Click to expand...
Click to collapse
Is this the famous MotherBoard Bug ? My version was 1.1
Anyhow, the download mode works its just you can't do anything with it because the its missing a pit file and can't upload one apparently ...
Anyone has a better suggestion about how to forcibly re-partition the drive ? and set the pit file ?
to me it sounds like a SD CARD issue and not a motherboard issue...
Does it show product name while in download mode? Or is it blank?
No its not SDS.
If you think its sd card then you are confused as NAND is part of the motherboard .
As you have no warranty then its certainly worth trying to repartition .
Sorry i don't know where the relevant post is .
jje
dxppxd said:
Does it show product name while in download mode? Or is it blank?
Click to expand...
Click to collapse
Hi,
Nope it doesn't say the product name in that field, what does it mean ?
here is the out of that...
ODIN MODE
PRODUCT NAME:
CUSTOME BINARY DOWNLOAD: No
CUSTOME BINARY: Samsung Official
SYSTEM STATUS: Custom
JJEgan said:
No its not SDS.
If you think its sd card then you are confused as NAND is part of the motherboard .
As you have no warranty then its certainly worth trying to repartition .
Sorry i don't know where the relevant post is .
jje
Click to expand...
Click to collapse
its ok, thanks for the patience,
i thought the re-partitioning is related to the space allocation between the partitions.
but you right since its just a few kb file it can sit on the nand, and be flashed.
Just got the exact same problem, used cyanogenmod 10.1 for a long time. Last days it has been freezing all the time so i put MIUI on it and after an hour it died.
If your product name is blank in download then you have SDS, return to Samsung for warranty repair.
Try flashing any kernel in odin and than check result
Sent from my GT-I9300 using xda app-developers app
Does anybody has a explaination for the white stripes on the screen? Normally the download mode screen is just clear but when it turns on it get's stuck at the white stripes.
Factionwars said:
Does anybody has a explaination for the white stripes on the screen? Normally the download mode screen is just clear but when it turns on it get's stuck at the white stripes.
Click to expand...
Click to collapse
The motherboard is blown, memory control chip is toast which probably explains the white lines.
boomboomer said:
The motherboard is blown, memory control chip is toast which probably explains the white lines.
Click to expand...
Click to collapse
Great, thanks. Hopefully they will repair my phone under warranty. It has been a very long time modding and running cm10.1.
idanohh said:
Hi All,
My phone is GT I9300 International Version,
ROM Installed before incident: one of the latest (past month) CM 10.1 nightly builds.
Woke up this morning and my phone was in download mode and my screen was like this and it kept rebooting:
Tried taking out the battery / reboot / connecting to usb problem persists the rom is not loading and bring you back to download mode with the white screen.
Tried to enter the following modes:
Recovery Mode: NO RECOVERY MODE, it enters back to the download mode.
Download Mode: when entering download mode the phone screen is black as it should be
Conclusion: DOWNLOAD MODE IS THE ONLY AVAILABLE MODE I HAVE !
So, i figured something probably have gone bad in the phone but it's fixable since i can still go into the download mode.
So i downloaded one of the stock roms from samsmobile and tried with odin
Odin 1.85/3.04/3.07 - Getting error messages:
every time i tried reflashing it has lost the driver connection and even though it showed "Added" in the ODIN sometimes it wouldn't pass the setup connection step, so everytime i had to reboot the phone in order for the connection to be properly initialized.
PDA file to flash -
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUFME3_I9300OJKFME1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
No Pit ? So i downloaded a PIT:
SGS3\GT-I9300_mx_20120220.pit - this one fits the i9300 with 16gb according to what i searched and off course the model i own.
here is the odin output
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
and that's it it was just stuck like this forever...
I should mention that i tried different USB ports or even computers (all win7 64 bit) also tried runnning it(odin) with windows xp sp3 compatibility
usually when you start download mode and odin has started already you would see some kind of a progress bar on the actual phone,
that was missing as well...meaning the phone didnt seem to respond so far to the odin although it did shows sign of connectivity.
does anyone have a solution for this issue ???
Click to expand...
Click to collapse
i have the same problem please can u help me. im missing a pit file can u send me a link for pit file
Please can some help me my sgs3 i9300 international. is stuck on boot logo but will go into download mode. Ive flashed a stock rom but it says failed missing pit file. Com6 can some one send me a link please
Sent from my GT-I9505 using XDA Premium 4 mobile app
You can try this solution:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
Read and follow the instructions exactly. If it doesn't work then you'll need a new motherboard, there is no other software solution.
It's NAND problem and it's solved
Hi,
this happens when you tick by mistake NAND ERASE ALL in ODIN software (ver.3 and newer), and then is partition damaged or couldn't be restored as the device need. Or when the some apps has access to EFS folder or DEV folder. Could be damaged partition.
Problem is solved here: Boot logo not boot animations disappeared! - solution is here! :highfive:
Regards, Peter
P.S. In thread above I explain all and btw. I had white stripes before starting my tablet! Everything will great after rebooting but white strips stayed.
During sending an SMS my phone hangs, and does not start anymore.
The phone is rooted. I tried to start recovery but nothing happens (Vol UP + Home + Power Key).
Odin is working by VOL Down + Home + Power Key, so i tried to flashTWRP recovery (https://dl.twrp.me/zerolte/twrp-3.0.2-0-zerolte.img.tar.html)
Which has worked:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But I can still not start into Recovery(?)
I think the next steps is to try a full flash of complete image, right?
But can i download/backup some files from the phone without recovery, I don't want to loos all my data (if possible)
Are there any other procedures to try?
Best regards,
Tom
Now, I tried Smart Switch with recover option -> no success ;( Stuck on Samsung boot logo.
I think I need a new phone (any help?)
You can't backup anything without the phone on or recovery.
Try hold only POWER + VOL DOWN ONLY nothing else. This should force safe mode. If this doesn't boot up hold power and vol down again until it goes off then quickly switch to recovery mode combination. If this won't boot to recovery next thing is to flash stock firmware. But you will lose all data and it will flash a new recovery image.
What model is it and what region?
Thanks for your tips, unfortunatly it does not work -> Save mode also stuck on boot screen.
I also tried to flash stock firmware (G925FXXS4DPIF_G925FVFG4DPHB_G925FXXS4DPIF_HOME.tar) -> Same issue
Model: International Version: SM-G925F
Should I try to flash a new bootloader? Which one? What's about my EFS Backup?
offtopicfication said:
Thanks for your tips, unfortunatly it does not work -> Save mode also stuck on boot screen.
I also tried to flash stock firmware (G925FXXS4DPIF_G925FVFG4DPHB_G925FXXS4DPIF_HOME.tar) -> Same issue
Model: International Version: SM-G925F
Should I try to flash a new bootloader? Which one? What's about my EFS Backup?
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/download/106963/G925FXXS4DPJ2_G925FBTU4DPH1_BTU/
Try to download and flash this.
I don't think you will be able to get any data off the phone now. But if you flash the firmware i just posed it should work.
Try twrp again and make backup of efs
callumbr1 said:
http://www.sammobile.com/firmwares/download/106963/G925FXXS4DPJ2_G925FBTU4DPH1_BTU/
Try to download and flash this.
I dont think you will be able to get any data off the phone now. But if you flash the firmware i just posed it should work
Click to expand...
Click to collapse
I fear the worst... still no look to boot into recovery, after flashing the provided firmeware and installing twrp again.
I think its a hardware fault (ram/memory issue)
offtopicfication said:
I fear the worst... still no look to boot into recovery, after flashing the provided firmeware and installing twrp again.
I think its a hardware fault (ram/memory issue)
Click to expand...
Click to collapse
Did you flash the UK BTU firmware i just posted above? Does odin show any error messages? What happens after odin passes and phone boots?
callumbr1 said:
Did you flash the UK BTU firmware i just posted above? Does odin show any error messages? What happens after odin passes and phone boots?
Click to expand...
Click to collapse
Of course, flashed G925FXXS4DPJ2_G925FBTU4DPH1_G925FXXS4DPI9_HOME.tar with Odin3_v3.12.3 in "AP Mode" and default settings.
No errors in log - the phone reboots automatically after flashing, stops at
PHP:
Samsung
Galaxy
S6 edge
POWERED BY
android
boot logo
Phone is since to ours in this state, I can't even shut down the phone. Only reboot with "Vol Down + Power" or "Vol Down + Home + Power" works (till to the next reboot halting at boot logo)
offtopicfication said:
Of course, flashed G925FXXS4DPJ2_G925FBTU4DPH1_G925FXXS4DPI9_HOME.tar with Odin3_v3.12.3 in "AP Mode" and default settings.
No errors in log - the phone reboots automatically after flashing, stops at
PHP:
Samsung
Galaxy
S6 edge
POWERED BY
android
boot logo
Phone is since to ours in this state, I can't even shut down the phone. Only reboot with "Vol Down + Power" or "Vol Down + Home + Power" works (till to the next reboot halting at boot logo)
Click to expand...
Click to collapse
Try the same firmware again with this PIT file
https://drive.google.com/file/d/0BzyeAt2hy6XeaXhVSUlGYTNobE0/view
In odin insert the PIT into pit and check repartition. Try that
here is a photo of the halted boot screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wow, fast response
callumbr1 said:
Try the same firmware again with this PIT file
https://drive.google.com/file/d/0BzyeAt2hy6XeaXhVSUlGYTNobE0/view
In odin insert the PIT into pit and check repartition. Try that
Click to expand...
Click to collapse
What is this PIT file?
I'm in a state I try everything (I have even ordered a new phone - S7) - but i would really happy if i can cancel that order :fingers-crossed:
Here is the log:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Stuck at boot logo :crying:
should I restart the phone or flash twrp?
offtopicfication said:
What is this PIT file?
I'm in a state I try everything (I have even ordered a new phone - S7) - but i would really happy if i can cancel that order :fingers-crossed:
Here is the log:
Click to expand...
Click to collapse
It just rebuilds the partitions. Try it to see if it works. Just put the firmware into AP and put the PIT into pit. Check f reset time, auto reboot and repartition.
callumbr1 said:
It just rebuilds the partitions. Try it to see if it works. Just put the firmware into AP and put the PIT into pit. Check f reset time, auto reboot and repartition.
Click to expand...
Click to collapse
I followed exactly your described steps, but still no behavior change...
offtopicfication said:
I followed exactly your described steps, but still no behavior change...
Click to expand...
Click to collapse
Hmmmm strange. Is your phone network locked?
callumbr1 said:
Hmmmm strange. Is your phone network locked?
Click to expand...
Click to collapse
no
offtopicfication said:
no
Click to expand...
Click to collapse
Whst region are you in?
Phone feels slightly warmish
callumbr1 said:
Whst region are you in?
Click to expand...
Click to collapse
Austria
I've been trying to flash the unlocked firmware and debrand and get rid of the bloat. But either gets stuck on Setupconnection or Initializing..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 6787 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006>
<ID:0/006> FAIL! (DeviceInfo)
I've also tried downgrading the version so i can sideload pie BUUUUT of course it does the same thing. I don't get it. I've ALWAYS had issues with Odin with ANY samsung device. I have windows 10. What's the deal here? I'm using the ATT variant of the S9+ I've read people saying OMG IT WORKS THANKS but I can't get odin to do anything but FAIL and get stuck on bloated firmware. And these threads tend to get ignored so I really hope someone has an idea.
I've ran it as admin. I've turned it on as admin THEN plugged the phone in. I've tried literally everything possible and it just fights me.
Are you putting the phone in download mode?
Odin has been around since the dinosaurs, and has been roc solid since then. You're doing something wrong, or have an issue somwhere on your end.
Are you enabling usb debugging on the phone and using the patched Odin?
the_scotsman said:
Are you putting the phone in download mode?
Odin has been around since the dinosaurs, and has been roc solid since then. You're doing something wrong, or have an issue somwhere on your end.
Click to expand...
Click to collapse
I've been modifying android devices since the captivate. yes its in download mode. It wouldn't read on odin if it wasn't.
YrrchSebor said:
Are you enabling usb debugging on the phone and using the patched Odin?
Click to expand...
Click to collapse
what will usb debugging do in download mode? Isn't that only useful in the system?
Konner920 said:
I've been modifying android devices since the captivate. yes its in download mode. It wouldn't read on odin if it wasn't.
Click to expand...
Click to collapse
EDIT: Put it BACK in download mode, put debugging on. Same issue. I'm not doing anything different than I always have using Odin. Ever since KNOX samsung phones have been a pain. I even installed a XP VM and it did the same thing, aswell as a windows 7 VM.
Konner920 said:
I've been modifying android devices since the captivate. yes its in download mode. It wouldn't read on odin if it wasn't.
Click to expand...
Click to collapse
So you're obviously using the correct version of Odin then I assume?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the_scotsman said:
So you're obviously using the correct version of Odin then I assume?
Click to expand...
Click to collapse
Yes the patched Odin. I've tried so many different firmwares and NONE will flash.
and everytime.
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 6787 M
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 6787 M
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 6787 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
then it'll give a DeviceInfo error and fail.
Konner920 said:
what will usb debugging do in download mode? Isn't that only useful in the system?
Click to expand...
Click to collapse
That's what I thought but I was advised to enable it in the developer options. I flashed a Verizon s9 plus to the unlocked firmware with no issues at all, using that same Odin. I was also advised to choose a firmware that has the same bootloader version that the phone was currently on.
YrrchSebor said:
That's what I thought but I was advised to enable it in the developer options. I flashed a Verizon s9 plus to the unlocked firmware with no issues at all, using that same Odin. I was also advised to choose a firmware that has the same bootloader version that the phone was currently on.
Click to expand...
Click to collapse
How can I tell what bootloader version I have? It's just the firmware version for it in recovery
Konner920 said:
How can I tell what bootloader version I have? It's just the firmware version for it in recovery
Click to expand...
Click to collapse
The 5th number from the end is either 1,2, or 3. So I checked in the phone info app and currently I had 1, so I chose an unlocked firmware that also had a 1 there. It flashed fine, and then it got all the OTA updates to get up to the latest unlocked build. Hope you figure it out!
Oh, I was also advised to choose an XAA firmware, but I have no idea why or what that even really means. I think it just means it's completely carrier free. Also I used CSC rather than Home CSC
YrrchSebor said:
The 5th number from the end is either 1,2, or 3. So I checked in the phone info app and currently I had 1, so I chose an unlocked firmware that also had a 1 there. It flashed fine, and then it got all the OTA updates to get up to the latest unlocked build. Hope you figure it out!
Oh, I was also advised to choose an XAA firmware, but I have no idea why or what that even really means. I think it just means it's completely carrier free. Also I used CSC rather than Home CSC
Click to expand...
Click to collapse
My bootloader has a 3, and I don't see any XAA firmware with a 3 on the bootloader.
YrrchSebor said:
The 5th number from the end is either 1,2, or 3. So I checked in the phone info app and currently I had 1, so I chose an unlocked firmware that also had a 1 there. It flashed fine, and then it got all the OTA updates to get up to the latest unlocked build. Hope you figure it out!
Oh, I was also advised to choose an XAA firmware, but I have no idea why or what that even really means. I think it just means it's completely carrier free. Also I used CSC rather than Home CSC
Click to expand...
Click to collapse
I literally can't get it to do anything
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> apdp.mbn
<ID:0/004> msadp.mbn
<ID:0/004> persist.img.ext4
<ID:0/004> userdata.img.ext4
<ID:0/004> dqmdbg.img.ext4
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 4655 M
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
if I try without the home CSC it just says Setupconnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I spam start til it says initializalize, and it FAILS with (Deviceinfo)
And I can't return this piece of **** cause best buy wants a 45 dollar restocking fee.
Konner920 said:
My bootloader has a 3, and I don't see any XAA firmware with a 3 on the bootloader.
Click to expand...
Click to collapse
The XAA is probably not crucial, but the bootloader number is I believe. Any luck yet?
Try to delete all android and samsung drivers on your PC. If you have Kies or smart switch uninstall it. Then start your phone in download mode and open odin. At least plug it into your PC and wait a few minutes, that Windows can find the drivers.
Are you launching ODIN as admimistrator? As in right click on it and selecting "runa as administrator "
Sent from my SM-G965U1 using Tapatalk
I ended up just taking it back for a refund, the razer phone 2 is under AT&T with no bloat so I'm waiting for my refund from best buy. I liked the phone, too much bloat and bixby is the most worthless assistant. It wasnt even worth trying to disable it, samsung lost their touch. I miss the old galaxy phones without KNOX and this bixby crap. so this can be closed.
had the same issue. Changed USB cable and all was good.
Konner920 said:
I've been trying to flash the unlocked firmware and debrand and get rid of the bloat. But either gets stuck on Setupconnection or Initializing..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 6787 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006>
<ID:0/006> FAIL! (DeviceInfo)
I've also tried downgrading the version so i can sideload pie BUUUUT of course it does the same thing. I don't get it. I've ALWAYS had issues with Odin with ANY samsung device. I have windows 10. What's the deal here? I'm using the ATT variant of the S9+ I've read people saying OMG IT WORKS THANKS but I can't get odin to do anything but FAIL and get stuck on bloated firmware. And these threads tend to get ignored so I really hope someone has an idea.
I've ran it as admin. I've turned it on as admin THEN plugged the phone in. I've tried literally everything possible and it just fights me.
Click to expand...
Click to collapse
i have the same problem, how to fix it? am i downloading the wrong firmware or i just did it wrong?
Same exact problem and history with Odin. Was a solution found for this?
Same exact problem.
All threads completed. (succeed 0 / failed 1)
Any knows solutions?