can anyone make a tutorial about how to install cwm with SE Extreme Tweak Installer v1.8
it says suerimission denied
On which firmware are you? 4.0.2.A.0.62?
Is your device rooted? Because permission denied meens, that you have no root.
If you want to install clockworkmod on lww, check this out. It will automaticly install cwm, but I don't know if it works on locked bootloader...
For SE Tweak installer you could check this out. It's a tutorial
how to root it then?
On which firmware version are you? 4.0.2.A.0.62?
Check out this here
But go to settings -> about phone -> build number and tell which version please!
Simplest Guide to install cmw !
As is usual with most updates, the Sony Ericsson Walkman Live lost root access after its recent update to Android 4.0.4. The guide below will show you how to obtain root access on this device running the 4.1.B.0.431 version of the OS and install ClockworkMod Recovery, enabling you to flash custom ROMs and do other things that require root access.
I. Before You Begin
1. This will not erase any data from your device, but as a precaution, do a backup of what you feel is important just in case.
2. This solution works by flashing a modified kernel that will provide root access. If you are not okay with this, do not proceed any further.
3. You will need a device with an unlocked bootloader for the procedure to work.
{ 4. If you want to install custom rom then download the custom rom and extract it. then there would a boot.img and replace it with the below bootextended blah blah.img } not understood? obviously... read full and then come back to this step.
II. Necessary Downloads
1. boot_EXtendedStockKernel_WT19i.img.
2. Fastboot Files
III. Flashing the Modified Kernel
1. Extract the fastboot-win32.zip file you downloaded above to a folder in your C:\ drive. You should end up with a folder named C:\fastboot-win32 containing fastboot.exe. Rename folder to fastboot for ease.
2. Copy the boot_EXtendedStockKernel_WT19i.img file you downloaded above to the same folder. Rename the file as boot.img for ease
3. Power down your device and put it into Fastboot Mode. To do this, press and hold the Volume Up + Power buttons until it enters the Fastboot mode. Blue led will glow.
3. Open up a Command Prompt window. To do this on your Windows 7 PC, click on the Windows Start button, type cmd in the search box and hit enter.
4. Run the following commands: (Get into . fastboot directory first ):- It should look as this
c:\fastboot\ fastboot flash boot.img
That’s it! You should have a rooted device after a reboot!
pls hit thanks if i helped.!
rachit.rc96 said:
As is usual with most updates, the Sony Ericsson Walkman Live lost root access after its recent update to Android 4.0.4. The guide below will show you how to obtain root access on this device running the 4.1.B.0.431 version of the OS and install ClockworkMod Recovery, enabling you to flash custom ROMs and do other things that require root access.
I. Before You Begin
1. This will not erase any data from your device, but as a precaution, do a backup of what you feel is important just in case.
2. This solution works by flashing a modified kernel that will provide root access. If you are not okay with this, do not proceed any further.
3. You will need a device with an unlocked bootloader for the procedure to work.
{ 4. If you want to install custom rom then download the custom rom and extract it. then there would a boot.img and replace it with the below bootextended blah blah.img } not understood? obviously... read full and then come back to this step.
II. Necessary Downloads
1. boot_EXtendedStockKernel_WT19i.img.
2. Fastboot Files
III. Flashing the Modified Kernel
1. Extract the fastboot-win32.zip file you downloaded above to a folder in your C:\ drive. You should end up with a folder named C:\fastboot-win32 containing fastboot.exe. Rename folder to fastboot for ease.
2. Copy the boot_EXtendedStockKernel_WT19i.img file you downloaded above to the same folder. Rename the file as boot.img for ease
3. Power down your device and put it into Fastboot Mode. To do this, press and hold the Volume Up + Power buttons until it enters the Fastboot mode. Blue led will glow.
3. Open up a Command Prompt window. To do this on your Windows 7 PC, click on the Windows Start button, type cmd in the search box and hit enter.
4. Run the following commands: (Get into . fastboot directory first ):- It should look as this
c:\fastboot\ fastboot flash boot.img
That’s it! You should have a rooted device after a reboot!
pls hit thanks if i helped.!
Click to expand...
Click to collapse
But that's for unlocked bootloader only! With the method I posted, you can root without unlocking the bootloader...
@OP Please tell us which build number you have! You must go to settings -> About phone -> Build number and tell us the number (or at least the 3 or 2 last numbers). If .42, .58, .62, .69, .432, .578! Otherwise we can't help you
First off, greetings to all. Not trying to hijack the thread but I have a quasi-related question.
Have a LWW WT19i, with Android 4.1.B.0.431 rooted as per the instructions here, with a locked bootloader (unlock allowed: no). I want to install Real ICS r5.2 which states it works with a locked BL, however the instructions ask me to use CWM which I can find no clear tutorial on how to install (most guides suggest installing new kernel).
Any help would be appreciated. Also fini13, if you're as new to this as I am, the guide I listed should help you at least with the rooting.
Dark_Az_ said:
First off, greetings to all. Not trying to hijack the thread but I have a quasi-related question.
Have a LWW WT19i, with Android 4.1.B.0.431 rooted as per the instructions here, with a locked bootloader (unlock allowed: no). I want to install Real ICS r5.2 which states it works with a locked BL, however the instructions ask me to use CWM which I can find no clear tutorial on how to install (most guides suggest installing new kernel).
Any help would be appreciated. Also fini13, if you're as new to this as I am, the guide I listed should help you at least with the rooting.
Click to expand...
Click to collapse
When your phone is rooted, you sould install cwm with the Extreme Tweak installer. But make sure you select your phone, otherwise it could brick.
Give it a shot
mihahn said:
When your phone is rooted, you sould install cwm with the Extreme Tweak installer. But make sure you select your phone, otherwise it could brick.
Give it a shot
Click to expand...
Click to collapse
Sir I've installed cwm using xparts and I'M ABLE to get into CWM recovery mode using the one click button in xparts..bt i CANT do the same while swithing on the fon,by pressing (also tried tapping) vol down key, after seeing the blue light sensor..i've tried many times&many ways as explained in many threads..bt coudnt... :crying:
why its so?? Can u once again say the correct combination of keys pls?
live with walkman..locked bl..stock rom&kernal..just rooted..
EDIT: TAP POWER BUTTON TO ENTER INTO RECOVERY MODE....Its not vol down key now in pvyparts 5.5.0.4
follow
fini13 said:
can anyone make a tutorial about how to install cwm with SE Extreme Tweak Installer v1.8
it says suerimission denied
Click to expand...
Click to collapse
first root by this method by doomlord
only follow 1 and 2 steps if u wan Gingerbread
and all for Ics
link- http://forum.xda-developers.com/showthread.php?t=1695514
then insall cwm
download CWM v5.02.7 from here:
http://www.mediafire.com/download/73xv18tht0e8zt4/CWM-Install.rar
requirements:
rooted device
how to install CWM on any xperia
1.turn on USB debugging
2.connect your phone to comp
3.download tthe above file and extract it
4.install-cwm2 for (xperia mini/mini pro/
active/live with walkman)
5.switch off your device
6.turn on the device and wait till "SONY
ERICSSON" logo appers
7.after "SONY ERICSSON" logo appears just
tap the volume down button repeatedly till
CWM open.
The simple method is, try to unlock yor device then install custom kernel that support autoroot and cwm, much tutorial for that in xda. :thumbup:
Related
ROOT TO ROM IN X10 Mini PRO (from stock ROM or custom ROM)
(thanks to xda developers nobodyAtall, Spyderex, Emperor.dk and many)
updating my earlier post. The complications in installing recovery completely removed. Now it is easy as charm.
I had myself miniCM pro v21 in stock kernal in my x10 mini pro. So this post intends to do on
1. flashing back to custom sony rom
2. rooting (with busy box installing)
3. installing recovery
4. unlocking bootloader
5. flashing custom kernel
6. flashing cutom ROM and google apps
before that : there are many other steps and methods for this but many of them did not work for me. I am describing here what worked for me.
Before starting save all your needed apps using app saver or with my backup root / titanium backup (after root). Back up your account with google account or export your contacts as .vcf to sd card for later import.
You should have through out internet connection and sometimes you would have to switch off the Antivirus to get it done properly. Also allow adb.exe to connect to net through firewall when needed.
1. FLASHING TO CUSTOM ROM WITH SONY ERICSSON PC COMPANION ( if you are having a custom ROM: other wise proceed to next step of rooting)
1. download and install pc companion from here http://www.sonyericsson.com/cws/sup...ject/pccompanion/xperiax10minipro?cc=in&lc=en if you are not already having it. Then make it recognize the phone.
2. Select support and update. It may tell having the latest update but go for repair.
3. Follow the commands. This may take a while
4. correctly follow the command to connect the phone in flash mode (switched off and back switch pressed)
later you have your old blue sony rom back.
1. ROOTING
1. download superoneclik.exe from here. http://www.mediafire.com/file/x1l6n7owj7uldbl/SuperOneClick.zip The problem is that many versions do not help and this version did it for me. Unzip and run the .exe
2. Plug the phone and leave it as such (do not charg/ connect or anything)
3. click root and follow the commands when prompted (like want to test?)
4. done (donate if you feel so)
5. Check for the superuser app in menu if it have been rooted.
Then go to market and install
* busybox
* root explorer (just to be on safer side)
3. RECOVERY
found out the easy way. Thanks to devrruti and rect2049 in xda
1. Download this clockworkmod installer from here https://github.com/downloads/react2409/X10-Mini-Pro-Utilities/CWMInstaller-Windows-v4-dl.zip
2. switch on the phone and connect the phone (ensure debugging mode on)
3. unzip the downloaded zip file and run the install.bat file. Follow the instructions
4. now disconnect when finished, switch off phone
5. switch on and when sony logo comes start multiple pressing and releasing the back switch to enter recovery mode
so there is cwm recovery
4. UNLOCKING BOOTLOADER
download the flashtool from (0.5.3 -I used) here. http://androxyde.github.com/Flashtool/
1. before advancing further download the required ROM (for me miniCM7 from http://minicm.googlecode.com/files/MiniCM7-2.1.8-mimmi.zip )and google apps from http://cmw.22aaf3.com/gapps/gapps-gb-20110613-signed.zip and copy both to the root of sdcard
2. open the install location of flashtool and install the ggsetup-2.2.0.11.exe file inside and install Gordon’s Gate found in /drivers folder
3. then restart the computer, open the task manager and kill any process named adb.exe
4. donot open flashtool after this till needed.
5. Download the s1tool to confirm the unlock certificate of phone from http://db.tt/OrOQO33 and unlocking tools from here http://db.tt/0zUMR5S4
6. Unzip the s1 tool to the designated folder and run the s1.exe. Switch off the phone. Select the Do Job button and wait.
7. Connect the phone in flash mode (switched off and back button pressed)
8. proceed further only if the screen shows semc simlock certificate
9. unplug the phone, switch it phone, connect to the computer
10. run msm7227_semc.cmd in the directory you unzipped the unlocking files to and press any key to start the unlocking process.
11. If everything goes correctly the log will show press any key at the end.
5. CUSTOM KERNEL AND ROM
download the require kernel.ftf from auther’s site (for me the kernel suiting my ROM was nAa kernal from http://minicm.googlecode.com/files/U20_nAa-10_2.6.29.6-nAa-10.ftf
1. copy this to the /firmware folder in flashtool install folder
2. run the flashtool and select flash, then flashmode
3. select the desired kernel
4. switch off the phone and connect in flash mode when pop up requests
5. disconnect phone when the tool says so
6. switch on the phone and enter the recovery mode when kernel logo comes by repeatedly pressing and releasing the back switch
7. in the recovery mode, do a backup from backup and restore option (up and down by volume keys and select by middle switch)
8. do a factory wipe data
9. then flash the ROM zip by selecting the option install zip from sdcard option followed by gapps zip flashing
10. finish this and take reboot (long)
Enjoy the new experience
A guide that can be stickied for newbies. i like this.
You can even modify the thread by giving elaborate colors and headlines and make it attractive. (if you are interested in doing that so)
Appreciate your work bro!
Thanks!
Tim
Like it.. But the rooting part is gonna feel complex for newbies... There are flash file which root and install CWM recovery automatically without any complication...
unnecessary rooting and recovery installs
I appreciate what you are trying to do as SpyderX's thread can be daunting. I think it would be easier to keep people using one tool as you go around the houses a bit.
Perhaps a simpler route from stock using S1 tool and flashtool. This is just an overview as I've copied and pasted it from my blog and would need expanding with links and sufficient detail:
Backup part 1 - use apps such as SMS Backup +, Bookmark sort and backup, APN backup and restore
Check that your bootloader can be safely unlocked with S1 tool (download from here: http://forum.xda-developers.com/showpost.php?p=19624790&postcount=2)
Turn on USB debugging on the phone (in settings in the applications section)
Use flashtool to root the phone (download from the homepage http://androxyde.github.com/Flashtool/)
Backup part 2 - use a root backup app (Titanium backup or MyBackup Root)
Use flashtool to unlock the bootloader
Flash the kernel (e.g. nAa kernel) in flashtool
Boot into CWM Recovery (assuming and flash customised firmware (e.g. MiniCM7)
http://forum.xda-developers.com/showthread.php?t=1462278
SE Tweaker Tool v3.0 [26/1/12] Unlock Bootloader+Kernel Guide X10 minipro|X10 mini X8
Maybe a bit simpler but your work appreciated bro..!! Keep it up..
Sent from my U20i using xda premium
changed
updated on the complicated recovery installing
Complete clarification needed here.. Do I HAVE to have stock 2.1 or can I use my current GB rom to unlock my bootloader??
Sent from my U20i using xda premium
jimcantfixit said:
Complete clarification needed here.. Do I HAVE to have stock 2.1 or can I use my current GB rom to unlock my bootloader??
Sent from my U20i using xda premium
Click to expand...
Click to collapse
mate its not necessary it go on stock then unlock bootloader.. myself unlocked my bootloader when i was in Gintonic.SE.. also people in Ginger-dx have reported fine.. so dont worry.. ul unlock it safe!!
The drop box links in bootloader unlocking section are not working. Can you please post new links?
Now it can be done with the new version of stool and flashtool. Anyway I will update everything as soon as I get time.
Sent from my U20i using xda app-developers app
I made exactly the same thread quite ago, I was really motivated and stuff but mods just moved it and got it forgotten in the general section. It even had colors, headlines, sections, collaborators, and stuff, sorry to disappointing you but with staff like this it is impossible to help newbies.. I even explained why post it on the developers section: Strictly, it should have been posted on General, yes, but the guide is directed to new members. Most of them probably doesn't check nor even know there is that section. It got moved anyways without any warning or a single word from the one who did it..
Anyways, good luck.
Requirements
Xperia Ray [ST18i] - Unlocked Bootloader
Drivers for Windows - Install PC Companion
[Only for Android 4.0.3] KERNEL from this Link | I use this .img file
Updated to Last Firmware Version from OTA
After Install Update from OTA, you must Unlock you Bootloader.
Tested!
Model Number: ST18i
Android Version: 2.3.4 & 4.0.3
Baseband Version: XXXXX-XXXXXXXXX-XXXXXXX-64 & XXXXX-XXXXXXXXX-XXXXXXX-70
Build Number: 4.0.2.A.0.62 & 4.1.A.0.562
How to Install Root
Download rootxperia.zip here and place it in your sd card
Enter device in fastboot mode. Turn off phone, hold volume up while you connect the USB cable to computer
Download the recoverRAY.img, you will get a zip file, extract it.
Open folder inside Flashtool where fastboot.exe exists (/FlashTool/x10flasher_lib)
Place the recoveryRAy.img inside the folder
Open command line in this folder
Test if it recognize your device, to do this type fastboot devices, if there is a result here proceed.
Now here's the tricky part, to enter a temporary recovery type fastboot boot recoveryRAY.img
*Notice that we didn't use fastboot flash boot ****.img here because as bin4ry said this recovery is designed to work just as recovery, if you flash it to your device it will NOT boot system anymore! This is just a temporary recovery for you so be careful not to flash it.
Now wait and your phone will reboot, you will see the FREE XPERIA splash screen and your device will now enter temp CWM recovery
On your phone choose install custom zip, locate the rootxperia.zip you added earlier in your SD card and flash it.
Reboot, your device is now rooted.
Click to expand...
Click to collapse
How to install CWM (Only for 2.3.4!)
Download this then extract
Make sure you enabled USB debugging, and also you need to set Screen timeout to 10 minutes so you don't miss the superuser promt
Run install-cwm1.cmd from the folder
Follow screen on screen instruction, reboot.
Click to expand...
Click to collapse
I use this method & success to Root My Xperia Ray.
Say Thanks please!
Another Great work by Persian-Devs
I cant install CWM by this method!
I cant see the error but i cant get into recovery using vol down.
When you see Sony Ericsson Logo (First Time), press 2 or 3 time Vol - & you can see CWM...
vagrik said:
When you see Sony Ericsson Logo (First Time), press 2 or 3 time Vol - & you can see CWM...
Click to expand...
Click to collapse
Ya i tried that. But i did not enter cwn.
I guess it hasnt been installed prop. idk why.
Do you Unlock Bootloader?
EDIT:
You must press Vol - in Sony Ericsson... not Logo picture. First Logo.
vagrik said:
Do you Unlock Bootloader?
EDIT:
You must press Vol - in Sony Ericsson... not Logo picture. First Logo.
Click to expand...
Click to collapse
Yes unlocked bootloader.
And yes vol- when i see SonyEricsson.
But i cant get into recovery!
I think you must do again (flash & more)
Sent from my ST18i using Tapatalk
That's awesome! Thanks!
Do you think this method will also work on the ARC S (ST18i)?
Sorry... TL18a
Your tutorial is a bit familiar LOL
As a newbe: some extra questions
You explain clear & idiot-proof, until I came along...
So as a newbe I have a few extra questions.
1. I have a new Xperia Ray 4.0.2.A.0.62 / 2.3.4 / ST18i out of the box. You mention OTA - update is recommended, as I already have 4.0.2.A.0.62; is that ok?
2. You mention You must unlock your bootloader, do you mean go to the offical Sony-Ericsson site and unlock bootloader the "official way"? (I have done this)
3. Which Flashtool, do you mean in point 4? And where can I find it/ download this flashtool?
4. After Unlocking the bootloader & Rooting my xperia ray, I believe I can remove bloatware like (wisepilot-trial, tetris-demo, facebook, topapps, etc.). But: what do I do to remove an app? Do I simply remove \system\apps\chinesetextinput.apk or do I have to uninstall it somehow like a computerprogram?
5. After rooting the system directory continues accessible? Is there a way to protect it again, after the removal of the bloatware? (my goal is just to remove the bloatware)
I hope my questions are not to dumb? With my first smartphone just for a couple of weeks I am a real newbe.
robertos37 said:
You explain clear & idiot-proof, until I came along...
So as a newbe I have a few extra questions.
1. I have a new Xperia Ray 4.0.2.A.0.62 / 2.3.4 / ST18i out of the box. You mention OTA - update is recommended, as I already have 4.0.2.A.0.62; is that ok?
2. You mention You must unlock your bootloader, do you mean go to the offical Sony-Ericsson site and unlock bootloader the "official way"? (I have done this)
3. Which Flashtool, do you mean in point 4? And where can I find it/ download this flashtool?
4. After Unlocking the bootloader & Rooting my xperia ray, I believe I can remove bloatware like (wisepilot-trial, tetris-demo, facebook, topapps, etc.). But: what do I do to remove an app? Do I simply remove \system\apps\chinesetextinput.apk or do I have to uninstall it somehow like a computerprogram?
5. After rooting the system directory continues accessible? Is there a way to protect it again, after the removal of the bloatware? (my goal is just to remove the bloatware)
I hope my questions are not to dumb? With my first smartphone just for a couple of weeks I am a real newbe.
Click to expand...
Click to collapse
1. No problem.
2. No problem.
3. Fastboot Tools : Download
4. I delete some application from system\apps, also "chinesetexinput & japanes..."
5. I can't find this application from system\apps!
Success !
Love u mate !
Of all the methods , this worked as told to perfection !
But i skipped the CWM install . this is no problem right ?
GKumaran said:
Love u mate !
Of all the methods , this worked as told to perfection !
But i skipped the CWM install . this is no problem right ?
Click to expand...
Click to collapse
I test all CWM version... still not found to the best version!
so... This is no problem!
Rooted
@Vagrik:
Tried it, done it, and got rid of facebook!. With "bloatware" I meant all the unwanted (cr)apps. Offcourse: chinese is gone too. Thanx.
@others:
I used the root, I had to try & see, a little bit of knowledge about ancient msdos helpt me.
First I was confused about placing the zip on the sdcard & the fastboot on my computer, but step by step it just worked out fine.
So I did use the step by step tutorial, including Fastboot, CWM, after that superuser & titanium backup. With titanium backup you can backup all apps; and uninstall the (cr)apps one by one. (I am glad I made a backup first...).
In the end: rooting was easier than the login at this forum... !!! I must have tried a hundred times to finally place this message!
Got one question left: does anyone know the apps connected to "latitude","places", "navigation"; it seems all google; but which apps exactly ?
When u install maps; places, latitude and navigation get installed along with maps
Hello, the tutorial is great but I have may questions.
Download rootxperia.zip here and place it in your sd card
there's two folders in the rootxperia.zip do I unzip the contents of rootxperia.zip in to my sd card or just place the rooxperia.zip in to sd card?
Open folder inside Flashtool where fastboot.exe exists (/FlashTool/x10flasher_lib)
You mean create folder in flashtool folder? could you explain in detail this part?
mrpeer_1 said:
Hello, the tutorial is great but I have may questions.
Download rootxperia.zip here and place it in your sd card
there's two folders in the rootxperia.zip do I unzip the contents of rootxperia.zip in to my sd card or just place the rooxperia.zip in to sd card?
Open folder inside Flashtool where fastboot.exe exists (/FlashTool/x10flasher_lib)
You mean create folder in flashtool folder? could you explain in detail this part?
Click to expand...
Click to collapse
Only ZIP file, not content or unzip!
no... np...
Is it possible to work with sk17???
Hi Moderators, Seniors and Experts,
Im new to android and new to xda developers.
Im using an Xperia mini pro and i would like to install Nerodroid in my phone.
its in the http://forum.xda-developers.com/showthread.php?t=1458963
Can somebody please tell me how to install it, i mean from A to Z, as i dont know anything about the process, rooting unlocking etc.
my phone is unlocked, i mean i can use any sim. other than that no interventions have been done, its just a new phone.
ple somebody post a tutorial or give me a link how to install nerodroid from A to Z.
I mean from the very very beginning.
Thank u very much in advance..
kasunrs said:
Hi Moderators, Seniors and Experts,
Im new to android and new to xda developers.
Im using an Xperia mini pro and i would like to install Nerodroid in my phone.
its in the http://forum.xda-developers.com/showthread.php?t=1458963
Can somebody please tell me how to install it, i mean from A to Z, as i dont know anything about the process, rooting unlocking etc.
my phone is unlocked, i mean i can use any sim. other than that no interventions have been done, its just a new phone.
ple somebody post a tutorial or give me a link how to install nerodroid from A to Z.
I mean from the very very beginning.
Thank u very much in advance..
Click to expand...
Click to collapse
Ok, so 1st:
- Root the phone!
Currently ZergRush method by DoomLord is the simplest way to do it.
NOTE: If you have newer firmware(4.0.2.A.0.62 or 4.0.2.A.0.69), check tutorial 3 first to downgrade your firmware.
Download the attached file from here http://forum.xda-developers.com/showthread.php?p=18805532 , extract it to a folder using any .zip manager, for example 7-Zip.
Connect Phone to USB.
Execute "RUNME.bat" from the extracted folder.
Follow the instructions in the window.
The phone will be rebooted, after reboot you will have Superuser app and your phone is rooted!
Don't forget to thank DoomLord on the original link in the credits
Click to expand...
Click to collapse
- You have to unlock your bootloader.
Go to http://unlockbootloader.sonymobile.com.
Enter service menu, open keypad and enter *#*#7378423#*#*.
Service Info - Configuration, Bootloader Unlock Allowed: Yes/No. If it says Yes, continue. If it says No, do not continue, because it will not work.
On the website, click "Start Unlocking the bootloader".
In the text, there are instructions, what you need to do. Also there are drivers that are needed for this process. Follow the instructions.
Install the drivers, then click Continue.
Enter your IMEI, name and e-mail. Leave out the last number from the IMEI.
You get a code, leave the website open, you will need this code.
Turn off your phone, then connect USB cable to your PC, hold down Volume UP button and connect USB cable to your phone. Blue LED should light up.
You will be asked for drivers. Point to the usb_driver folder where you placed the android_winusb.inf-file, and select the Android Boot loader Interface-file.
Open command prompt, first enter this
Code:
cd C:\...\android-sdk\platform-tools
Replace C with the correct drive letter and ... with the path to the android-sdk folder. Next, enter this command
Code:
fastboot.exe -i 0x0fce oem unlock 0xKEY
Replace KEY with the key that you got from the website.
Bootloader is now unlocked.
Click to expand...
Click to collapse
- Now install the Custom ROM:
Requirements: Unlocked bootloader, ROM .zip file downloaded.
Nothing difficult here.
Place the downloaded .zip file to the root of your SDcard.
Install the custom kernel, explained in previous tutorial.
Enter Recovery(while booting, when screen gets brighter, press Volume Down button until phone enters Recovery).
Make factory reset, wipe cache partition and clear Dalvik Cache(under Advanced).
NB! Do NOT make format /system, because some ROMs require files from system folder and installation will not finish if files are not available. Then you have to install stock ROM again.
Choose install zip from sdcard, pick the downloaded .zip file on your SDcard.
Wait for it to finish and reboot your phone.
Click to expand...
Click to collapse
That's it! Thanks for the user Someguyfromhell for the posts!
OBTAINING ROOT FOR XPERIA P ICS
Download the .tft file here: http://forum.xda-developers.com/showthread.php?t=1838457&page=3 & then change the .tft to .zip & extract just kernel.sin, you will need this to get back to stock ICS kernel later on.
Enter Fastboot mode by holding UP volume key while plugging in USB
Fastboot flash this kernel: http://forum.xda-developers.com/showthread.php?t=1676862 & boot into CWM by holding UP VOL KEY when the blue light lights up
Download the SuperUser zip file located here: http://androidsu.com/superuser/ & choose the ARM device type
Send the Superuser zip file anywhere to the sdcard
Flash SuperUser & Power off again
Fastboot mode again, and flash the stock kernel.sin that you extracted from the .tft file
Enjoy root =)
Other Useful Things for our new-found ICS:
Google Now with working voice search: http://forum.xda-developers.com/show....php?t=1747224
S-Voice: http://forum.xda-developers.com/showthread.php?p=26300180#post26300180
what kernel did tou use?
Could you please give a link?
royalbloodvi said:
OBTAINING ROOT FOR XPERIA P ICS
Download the .tft file here: http://forum.xda-developers.com/showthread.php?t=1838457&page=3 & then change the .tft to .zip & extract just kernel.sin, you will need this to get back to stock ICS kernel later on.
[*]Enter Fastboot mode by holding UP volume key while plugging in USB
[*]Fastboot flash any 2.3.7 Kernel with CWM
[*]Download the SuperUser zip file located here: http://androidsu.com/superuser/ & choose the ARM device type
[*]Send the Superuser zip file anywhere to the sdcard
[*]Flash SuperUser & Power off again
[*]Fastboot mode again, and flash the stock kernel.sin that you extracted from the .tft file
[*]Enjoy root =)
Click to expand...
Click to collapse
I checked it works for SXP.
Thanks for your help! :good:
i used this methode yesterday! and works perfect.
thanks for your posting
hagen.von.tronje said:
what kernel did tou use?
Could you please give a link?
Click to expand...
Click to collapse
First post updated with kernel link
thanks !
need unlocked bootloader?
Do you need an unlocked bootloaderto root the device?
ste71m said:
Do you need an unlocked bootloaderto root the device?
Click to expand...
Click to collapse
Yes, you would need to unlock your bootloader.
EDIT: Working good. Now If I want to go to CWM how can I do that ?
http://forum.xda-developers.com/showthread.php?t=1742992&page=56
locked bootloader , with this guide http://forum.xda-developers.com/showpost.php?p=29752123&postcount=530
4rch0 said:
http://forum.xda-developers.com/showthread.php?t=1742992&page=56
locked bootloader , with this guide http://forum.xda-developers.com/showpost.php?p=29752123&postcount=530
Click to expand...
Click to collapse
Guess I'll wait for an easier method, if there will be one...
If I want a CWM I need to flash Doom's Kernel than again back to the stock ?
Yes, or wait until someone creates a new kernel for ICS.
royalbloodvi said:
OBTAINING ROOT FOR XPERIA P ICS
Download the .tft file here: http://forum.xda-developers.com/showthread.php?t=1838457&page=3 & then change the .tft to .zip & extract just kernel.sin, you will need this to get back to stock ICS kernel later on.
Enter Fastboot mode by holding UP volume key while plugging in USB
Fastboot flash this kernel: http://forum.xda-developers.com/showthread.php?t=1676862 & boot into CWM by holding UP VOL KEY when the blue light lights up
Download the SuperUser zip file located here: http://androidsu.com/superuser/ & choose the ARM device type
Send the Superuser zip file anywhere to the sdcard
Flash SuperUser & Power off again
Fastboot mode again, and flash the stock kernel.sin that you extracted from the .tft file
Enjoy root =)
Other Useful Things for our new-found ICS:
Google Now with working voice search: http://forum.xda-developers.com/show....php?t=1747224
S-Voice: http://forum.xda-developers.com/showthread.php?p=26300180#post26300180
Click to expand...
Click to collapse
I on stock ICS 4.0.4 , Should i try this method directly or i need to unlock bootloader as someone has asked before ??
Will the method for unlocking / relocking bootloader remains same as that for GB ? i cant find a post about bootloader locking & unlocking for ICS !!
And after i have locked bootloader after performing the whole process, will my DRM keys ( track id etc ) remain intact ??
aayush_neov said:
I on stock ICS 4.0.4 , Should i try this method directly or i need to unlock bootloader as someone has asked before ??
Will the method for unlocking / relocking bootloader remains same as that for GB ? i cant find a post about bootloader locking & unlocking for ICS !!
And after i have locked bootloader after performing the whole process, will my DRM keys ( track id etc ) remain intact ??
Click to expand...
Click to collapse
Use this to unlock the BL
http://forum.xda-developers.com/showthread.php?p=29281222
after you have unlocked follow the instructions on this topic
What about CWM?
is there anyway to CWM work?
so for the one who can't unlock their bootloaders
Which SuperUser zip file should I download? there is a long list on the site and some fo them marked as x86 and ARM
EDIT- never mind this one worked "Superuser-3.2-arm-signed.zip"
3.2 is beta release. You can use 3.1.3 and 3.2. Make sure its for arm v7.
royalbloodvi said:
OBTAINING ROOT FOR XPERIA P ICS
Download the .tft file here: http://forum.xda-developers.com/showthread.php?t=1838457&page=3 & then change the .tft to .zip & extract just kernel.sin, you will need this to get back to stock ICS kernel later on.
Enter Fastboot mode by holding UP volume key while plugging in USB
Fastboot flash this kernel: http://forum.xda-developers.com/showthread.php?t=1676862 & boot into CWM by holding UP VOL KEY when the blue light lights up
Download the SuperUser zip file located here: http://androidsu.com/superuser/ & choose the ARM device type
Send the Superuser zip file anywhere to the sdcard
Flash SuperUser & Power off again
Fastboot mode again, and flash the stock kernel.sin that you extracted from the .tft file
Enjoy root =)
Other Useful Things for our new-found ICS:
Google Now with working voice search: http://forum.xda-developers.com/show....php?t=1747224
S-Voice: http://forum.xda-developers.com/showthread.php?p=26300180#post26300180
Click to expand...
Click to collapse
After unlocking bootloader with this method http://forum.xda-developers.com/showthread.php?t=1794800
I can proceed directly to this thread ??
And for relocking bootloader, do i have to flash the ICS rom again ?
Does anyone know how to root the .167 firmware of the M4 Aqua? I don`t want to downgrade due to the improvements made on this firmware, I have the E2303 model of the phone
With unlocked bootloader, you can simply flash twrp and then the supersu zip. With locked bootloader i dont know.
George0501 said:
Does anyone know how to root the .167 firmware of the M4 Aqua? I don`t want to downgrade due to the improvements made on this firmware, I have the E2303 model of the phone
Click to expand...
Click to collapse
Yeah man. Unfortunately you do gotta downgrade first if your bootloader is locked. Otherwise just do what the other guy said.
Here's what you do if you've got locked bootloader.
Get the full source and files here: http://forum.xda-developers.com/m4-aqua/development/bl-locked-twrp-touch-recovery-bl-locked-t3257430
1. Downgrade
2. Flash root through adb
3. Flash recovery through adb
4. Build pre-rooted upgrade zip
5. Flash with recovery
6. Now you're on .167 with root and bootloader locked.
cmstew said:
Yeah man. Unfortunately you do gotta downgrade first if your bootloader is locked. Otherwise just do what the other guy said.
Here's what you do if you've got locked bootloader.
Get the full source and files here: http://forum.xda-developers.com/m4-aqua/development/bl-locked-twrp-touch-recovery-bl-locked-t3257430
1. Downgrade
2. Flash root through adb
3. Flash recovery through adb
4. Build pre-rooted upgrade zip
5. Flash with recovery
6. Now you're on .167 with root and bootloader locked.
Click to expand...
Click to collapse
Hi! I really need some help...
Would you mind being a bit specific about a couple of those steps? I'm sorry but i'm a bit noob, and im a little confused about all of these ways and step to root your phone. How do i downgrade and is 26.1.A.1.128 the right version for the E2203? Are the steps you just referred explained with more detail anywhere? I'm sorry for all these questions but this is being an harder process than i was expecting...
Thanks
If you're having problems with random reboots after following this procedure please check the very end of this post!
Filipedls said:
Hi! I really need some help...
Would you mind being a bit specific about a couple of those steps? I'm sorry but i'm a bit noob, and im a little confused about all of these ways and step to root your phone. How do i downgrade and is 26.1.A.1.128 the right version for the E2203? Are the steps you just referred explained with more detail anywhere? I'm sorry for all these questions but this is being an harder process than i was expecting...
Thanks
Click to expand...
Click to collapse
Sure thing friend.
I'm going to assume you meant 2303 correct? If it is indeed a 2203 like you say, you don't have an xperia m4 aqua. You have an xperia e3 and you'll have to go get support in another thread.
ADB, Fastboot, Drivers
First you'll need to make sure you have ADB, Fastboot and Drivers to interact with your android device.
The easiest way is to follow this guide to get all of those: http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Downgrade Firmware
1. First get yourself firmware version 26.1.A.1.128 for your variation. You can probably find your firmware at this link: http://forum.xda-developers.com/m4-aqua/general/stock-xperia-m4-aqua-xperia-m4-aqua-dual-t3141061 (Get the 26.1.A.1.128 version or any firmware that has xx.x.x.1.xxx! The x's can be anything but the 1 is important)
2. Once you have that, you'll need to make sure you have a program called FlashTool.
Download: http://www.flashtool.net/downloads.php
Open it and click the lightning bolt in the top left and make sure flashmode is selected and click okay. Then click the 3 dot's button in the top right of the window that pops up and browse to the folder that your FTF file is located. Then choose the ftf file. check both options under wipe. If you see any .ta files in the firmware content area, make sure you exclude them. Then Press OK.
3. Unplug your phone (if it's not already) and turn it off. Now, plug the one side of the cord into the computer with the other side not connected to your phone yet. Then hold down the volume down button while plugging in the other end of the cord. sometimes you get a popup asking about a script file. just click okay and let it proceed.
4. once this whole bit is done. You have downgraded your firmware.
Installing Root on downgraded firmware
1. Download this rootkit file:
https://www.dropbox.com/s/edse0h6b02odzn1/rootkitXperia_E23xx.zip?dl=0
2. Extract it.
3. make sure USB debugging is turned on in your phone settings. Go to settings. Tap about phone a whole bunch of times till it says you're a developer. Then go back and just above about phone should be another section called something like development. click that and scroll down and find a checkbox that says something like enable usb debugging. Click it and you're ready to root.
4. Now run install.bat in the rootkit folder. If your phone asks you a question about permissions, just click allow.
5. your phone should restart and you should now see the SuperSu app in your app drawer. If you don't see it, try installing the root again.
Installing Custom Recovery on any firmware with root
1. Download this recovery install file:
https://www.dropbox.com/s/yomdwq3p2le9hvi/M4Aqua-lockedTWRP-0.1-installer.zip?dl=0
2. Extract it
3. run install.bat
4. your phone should ask about root privileges for ADB. Sometimes it takes awhile to pop up. Just click allow.
4. your phone wont restart with this one but you should now have a custom recovery
Booting into the custom recovery
1. Turn off your phone and unplug it from your computer
2. Now turn your phone on
3. When you feel it vibrate and see the notification light turn blue (sometime while it says sony on the screen) press the volume down button and hold it.
4. You should now be booted into the custom recovery
Installing the latest version of android while keeping root
1. Download this file below:
https://www.dropbox.com/s/z0tgziwx8epdu38/twrp_prerooted_M4.zip?dl=0
2. Extract it
3. Download 7 zip from the below link:
http://www.7-zip.org/
choose if you're 64 or 32 bit system.
4. Install 7 zip
5. Make sure you have an FTF file of the version of android you want to upgrade to. (probably whatever version you were running before all of this)
6. Open the ftf file in 7 zip and drag the system.sin and kernel.sin file out of it onto your desktop
7. now open flashtool again.
8. Choose the advaced menu item and click Sin Editor
9. Browse to where you put the .sin files and repeat these next steps for each one.
9a. click on the .sin file and click open.
9b. Then click extract data
9c. the extracted file should be in the same location as your original file. (repeat this step to extract other sin files)
10. Once you have kernel.elf and system.ext4 copy them into your twrp_prerooted_M4 folder
11. Then select everything in the folder and right click on them and click Add to zip...
12. It should open a window that has a bunch of settings. Don't worry about most of them but just make sure that you have the compression level set to 'store' and the type set to zip. Then compress it.
13. now make sure your phone is plugged into your computer and still in recovery mode.
14. transfer your newly created zip file over to the sd card of your phone
15. on your phone in the recovery, click install and browse to where the zip file is. Select it and install it.
16. Reboot your phone and you should now be on the latest firmware with root.
17. after your phone reboots, you will have lost your recovery so go back and install the recovery like i mentioned before if you still want it.
That's it. I hope this was clear enough for you. If you have any questions, feel free to PM me for more clarification.
Fixing Random Reboots - New Information
There is a guy in the general forums named @thewailer that seems to have come up with a solution to the random reboot problem. I'm currently trying it out and it seems to be holding up so far.
Check out his guide over here: http://forum.xda-developers.com/m4-aqua/general/guide-fixing-random-gplay-app-install-t3338362
cmstew said:
Sure thing friend.
I'm going to assume you meant 2303 correct? If it is indeed a 2203 like you say, you don't have an xperia m4 aqua. You have an xperia e3 and you'll have to go get support in another thread.
...
Click to expand...
Click to collapse
Yeah its a 2303, im sorry. Thanks for your help! I was a little hard to get into the xperia world I've downgraded and rooted my phone i ll try to update to the .167 while keeping the root tonight. Once again thank you very much
Filipedls said:
Yeah its a 2303, im sorry. Thanks for your help! I was a little hard to get into the xperia world I've downgraded and rooted my phone i ll try to update to the .167 while keeping the root tonight. Once again thank you very much
Click to expand...
Click to collapse
Hey, no worries. I just wanted to make sure I wasn't assisting you in bricking your device.
Most of the tutorials on this forum are not detailed enough. So I hope this one was for you. Please feel free to mention any parts you had trouble with still and I can try to make it clearer for other members.
cmstew said:
Sure thing friend.
I'm going to assume you meant 2303 correct? If it is indeed a 2203 like you say, you don't have an xperia m4 aqua. You have an xperia e3 and you'll have to go get support in another thread.
Anyways, it's really quite simple. Assuming you've already got proper drivers installed on your computer to interact with your android device. Do you have them? Let me know if you don't.
Downgrade Firmware
1. First use that firmware you've got. 26.1.A.1.128. Otherwise, here's a link to downlaod it again if you forgot where it is. https://userscloud.com/vywbd26o2g1g
2. Once you have that, you'll need to make sure you have a program called FlashTool.
Download: http://www.flashtool.net/downloads.php
Open it and click the lightning bolt in the top left and make sure flashmode is selected and click okay. Then click the 3 dot's button in the top right of the window that pops up and browse to the folder that your FTF file is located. Then choose the ftf file. check both options under wipe. If you see any .ta files in the firmware content area, make sure you exclude them. Then Press OK.
3. Unplug your phone (if it's not already) and turn it off. Now, plug the one side of the cord into the computer with the other side not connected to your phone yet. Then hold down the volume down button while plugging in the other end of the cord. sometimes you get a popup asking about a script file. just click okay and let it proceed.
4. once this whole bit is done. You have downgraded your firmware.
Installing Root on downgraded firmware
1. Download this rootkit file:
https://www.dropbox.com/s/edse0h6b02odzn1/rootkitXperia_E23xx.zip?dl=0
2. Extract it.
3. make sure USB debugging is turned on in your phone settings. Go to settings. Tap about phone a whole bunch of times till it says you're a developer. Then go back and just above about phone should be another section called something like development. click that and scroll down and find a checkbox that says something like enable usb debugging. Click it and you're ready to root.
4. Now run install.bat in the rootkit folder. If your phone asks you a question about permissions, just click allow.
5. your phone should restart and you should now see the SuperSu app in your app drawer. If you don't see it, try installing the root again.
Installing Custom Recovery on any firmware with root
1. Download this recovery install file:
https://www.dropbox.com/s/yomdwq3p2le9hvi/M4Aqua-lockedTWRP-0.1-installer.zip?dl=0
2. Extract it
3. run install.bat
4. your phone should ask about root privileges for ADB. Sometimes it takes awhile to pop up. Just click allow.
4. your phone wont restart with this one but you should now have a custom recovery
Booting into the custom recovery
1. Turn off your phone and unplug it from your computer
2. Now turn your phone on
3. When you feel it vibrate and see the notification light turn blue (sometime while it says sony on the screen) press the volume down button and hold it.
4. You should now be booted into the custom recovery
Installing the latest version of android while keeping root
1. Download this file below:
https://www.dropbox.com/s/z0tgziwx8epdu38/twrp_prerooted_M4.zip?dl=0
2. Extract it
3. Download 7 zip from the below link:
http://www.7-zip.org/
choose if you're 64 or 32 bit system.
4. Install 7 zip
5. Make sure you have an FTF file of the version of android you want to upgrade to. (probably whatever version you were running before all of this)
6. Open the ftf file in 7 zip and drag the system.sin and kernel.sin file out of it onto your desktop
7. now open flashtool again.
8. Choose the advaced menu item and click Sin Editor
9. Browse to where you put the .sin files and repeat these next steps for each one.
9a. click on the .sin file and click open.
9b. Then click extract data
9c. the extracted file should be in the same location as your original file. (repeat this step to extract other sin files)
10. Once you have kernel.elf and system.ext4 copy them into your twrp_prerooted_M4 folder
11. Then select everything in the folder and right click on them and click Add to zip...
12. It should open a window that has a bunch of settings. Don't worry about most of them but just make sure that you have the compression level set to 'store' and the type set to zip. Then compress it.
13. now make sure your phone is plugged into your computer and still in recovery mode.
14. transfer your newly created zip file over to the sd card of your phone
15. on your phone in the recovery, click install and browse to where the zip file is. Select it and install it.
16. Reboot your phone and you should now be on the latest firmware with root.
17. after your phone reboots, you will have lost your recovery so go back and install the recovery like i mentioned before if you still want it.
Thats it. I hope this was clear enough for you. If you have any questions, feel free to PM me for more clarification.
Click to expand...
Click to collapse
Hey, i tried this thing, but at the 15. step (from the last one) the flashing doesn't work, the installation of the zip only takes about 5 seconds, says finished, but i don't see any changes on the phone and still have .128. Any solution for this?
cmstew said:
Sure thing friend.
......
Thats it. I hope this was clear enough for you. If you have any questions, feel free to PM me for more clarification.
Click to expand...
Click to collapse
Hi
I've flashed E2303_26.1.A.2.167_CE.ftf and everything works fine but I still got the BL locked. if I flash other ftf I get no network signal on my phone, I just get signal with this ftf.
if I follow your instructions I will have .128 unlocked but I will still not have signal on my phone, right?
if I flash .167 after unlock the 128 will I get the .167 unlocked? if anything goes wrong and flash .167 again will everything works fine?
many thanks, and great detailed explanation on how to unlock our phone.
.167 with root and bootloader locked
jorginhopc said:
Hi
I've flashed E2303_26.1.A.2.167_CE.ftf and everything works fine but I still got the BL locked. if I flash other ftf ......
Click to expand...
Click to collapse
If I`ve understood correctly, it will remain unlocked:
1. Downgrade
2. Flash root through adb
3. Flash recovery through adb
4. Build pre-rooted upgrade zip
5. Flash with recovery
6. Now you're on .167 with root and bootloader locked.
---------- Post added at 02:39 PM ---------- Previous post was at 02:34 PM ----------
Will we loose the DRM keys?
Can somebody check them after successful rooted firmware upgrade, please?
as long as the Bootloader is locked, the DRM keys are safe.
cmstew said:
Hey, no worries. I just wanted to make sure I wasn't assisting you in bricking your device.
Most of the tutorials on this forum are not detailed enough. So I hope this one was for you. Please feel free to mention any parts you had trouble with still and I can try to make it clearer for other members.
Click to expand...
Click to collapse
Hey! Done, my phone is rooted and with the firmware 2.167. I only had time to do it today and i ****ted my pants , the first time i booted it took 1 min for all the apps and menus to appear, but then everything is working!
Thanks for everything men!
Filipedls said:
Hey! Done, my phone is rooted and with the firmware 2.167. I only had time to do it today and i ****ted my pants , the first time i booted it took 1 min for all the apps and menus to appear, but then everything is working!
Thanks for everything men!
Click to expand...
Click to collapse
Guess I could have mentioned the first boot could take awhile.
I should also mention that because the bootloader is still locked that it is nearly, if not actually completely, impossible to brick your device. There is almost always a way back to a functional device.
I'm glad this all worked for you though.
cmstew said:
Yeah man. Unfortunately you do gotta downgrade first if your bootloader is locked. Otherwise just do what the other guy said.
Here's what you do if you've got locked bootloader.
Get the full source and files here: http://forum.xda-developers.com/m4-aqua/development/bl-locked-twrp-touch-recovery-bl-locked-t3257430
1. Downgrade
2. Flash root through adb
3. Flash recovery through adb
4. Build pre-rooted upgrade zip
5. Flash with recovery
6. Now you're on .167 with root and bootloader locked.
Click to expand...
Click to collapse
Hey can you help me with something? I'm trying to downgrade to .112 but when ever i try to flash it, it gives me an error on boot delivery, it says that there are some files missing. I already tried with several ftfs, and other flashtool version including latest one. The only ftf that i'm able to flash is stock 26.1.A.2.167 adn i got it from xperifirm. I already tried to flash everything except for bootboundle, but it will still get in a boot loop.
If you have flashed xperia m4, can you please tell me what flashtool version you used, and what ftf compilance? I have E2306.
cmstew said:
Sure thing friend.
I'm going to assume you meant 2303 correct? If it is indeed a 2203 like you say, you don't have an xperia m4 aqua. You have an xperia e3 and you'll have to go get support in another thread.
......
Thats it. I hope this was clear enough for you. If you have any questions, feel free to PM me for more clarification.
Click to expand...
Click to collapse
BRex68 said:
If I`ve understood correctly, it will remain unlocked:
....
Can somebody check them after successful rooted firmware upgrade, please?
Click to expand...
Click to collapse
Thank you, thank you all. I finally did it.
just some remarks that can help other guys with same issue:
1. I need to use the newest version of Flashtool. without the final patch 26.1.A.1.128 was always rebooting the phone.
2. After the last step (Installing the latest version of android while keeping root) I had version 167, network signal was working fine but mobile data doesn't. I went to Settings -> Wireless & Networks -> ... More and clicked "Internet Settings". mobile data started working and no further issues found.
3. Finally, in the end I got .167 rooted but no able to enter the custom recovery. As my device was rooted I just repeated the step "Installing Custom Recovery on any firmware with root" and now everything was as expected.
many thanks
How to build prerooted .167 firware?
Thanks in advance
hi
just a quick question. will i be able to upgrade to the official android 6 update once it comes out OTA.
my biggest problem with the device is that i am constantly low on storage so with root i could solve the problem unto android 6 brings SD as internal
thank you
cmstew said:
Sure thing friend.
I'm going to assume you meant 2303 correct? If it is indeed a 2203 like you say, you don't have an xperia m4 aqua. You have an xperia e3 and you'll have to go get support in another thread.
Anyways, it's really quite simple. Assuming you've already got proper drivers installed on your computer to interact with your android device. Do you have them? Let me know if you don't.
Downgrade Firmware
1. First use that firmware you've got. 26.1.A.1.128. Otherwise, here's a link to downlaod it again if you forgot where it is. https://userscloud.com/vywbd26o2g1g
2. Once you have that, you'll need to make sure you have a program called FlashTool.
Download: http://www.flashtool.net/downloads.php
Open it and click the lightning bolt in the top left and make sure flashmode is selected and click okay. Then click the 3 dot's button in the top right of the window that pops up and browse to the folder that your FTF file is located. Then choose the ftf file. check both options under wipe. If you see any .ta files in the firmware content area, make sure you exclude them. Then Press OK.
3. Unplug your phone (if it's not already) and turn it off. Now, plug the one side of the cord into the computer with the other side not connected to your phone yet. Then hold down the volume down button while plugging in the other end of the cord. sometimes you get a popup asking about a script file. just click okay and let it proceed.
4. once this whole bit is done. You have downgraded your firmware.
Installing Root on downgraded firmware
1. Download this rootkit file:
https://www.dropbox.com/s/edse0h6b02odzn1/rootkitXperia_E23xx.zip?dl=0
2. Extract it.
3. make sure USB debugging is turned on in your phone settings. Go to settings. Tap about phone a whole bunch of times till it says you're a developer. Then go back and just above about phone should be another section called something like development. click that and scroll down and find a checkbox that says something like enable usb debugging. Click it and you're ready to root.
4. Now run install.bat in the rootkit folder. If your phone asks you a question about permissions, just click allow.
5. your phone should restart and you should now see the SuperSu app in your app drawer. If you don't see it, try installing the root again.
Installing Custom Recovery on any firmware with root
1. Download this recovery install file:
https://www.dropbox.com/s/yomdwq3p2le9hvi/M4Aqua-lockedTWRP-0.1-installer.zip?dl=0
2. Extract it
3. run install.bat
4. your phone should ask about root privileges for ADB. Sometimes it takes awhile to pop up. Just click allow.
4. your phone wont restart with this one but you should now have a custom recovery
Booting into the custom recovery
1. Turn off your phone and unplug it from your computer
2. Now turn your phone on
3. When you feel it vibrate and see the notification light turn blue (sometime while it says sony on the screen) press the volume down button and hold it.
4. You should now be booted into the custom recovery
Installing the latest version of android while keeping root
1. Download this file below:
https://www.dropbox.com/s/z0tgziwx8epdu38/twrp_prerooted_M4.zip?dl=0
2. Extract it
3. Download 7 zip from the below link:
http://www.7-zip.org/
choose if you're 64 or 32 bit system.
4. Install 7 zip
5. Make sure you have an FTF file of the version of android you want to upgrade to. (probably whatever version you were running before all of this)
6. Open the ftf file in 7 zip and drag the system.sin and kernel.sin file out of it onto your desktop
7. now open flashtool again.
8. Choose the advaced menu item and click Sin Editor
9. Browse to where you put the .sin files and repeat these next steps for each one.
9a. click on the .sin file and click open.
9b. Then click extract data
9c. the extracted file should be in the same location as your original file. (repeat this step to extract other sin files)
10. Once you have kernel.elf and system.ext4 copy them into your twrp_prerooted_M4 folder
11. Then select everything in the folder and right click on them and click Add to zip...
12. It should open a window that has a bunch of settings. Don't worry about most of them but just make sure that you have the compression level set to 'store' and the type set to zip. Then compress it.
13. now make sure your phone is plugged into your computer and still in recovery mode.
14. transfer your newly created zip file over to the sd card of your phone
15. on your phone in the recovery, click install and browse to where the zip file is. Select it and install it.
16. Reboot your phone and you should now be on the latest firmware with root.
17. after your phone reboots, you will have lost your recovery so go back and install the recovery like i mentioned before if you still want it.
Thats it. I hope this was clear enough for you. If you have any questions, feel free to PM me for more clarification.
Click to expand...
Click to collapse
If your Bootloader is locked, then OTA update will work.
If BL is unlocked then use Flashtool to update.
HI
sorry to ask again i have a problem.
i cant select the firmware update in flashtool.
i can open the folder it is in but i dont see the Firmware file
Hello,
I am troubled by constant reboots after following this guide. Especially when downloading apps. Anyone having the same issues ?
thank you