Here's what happen i rooted, boot unlock the phone it was on 2.3.6 GB i installed beta-0.1.0-2d-cm-9.0.0-RC0-Atrix-KANG-signed.zip - ZIP archive and gapps problem orginally was there was no android market (play) and the interal sd card was not mounted i restarted the phone this menu came up (below ) when i went to 9 or 10 they said( Magic Value Mismatch) so i kept trying , nothing happen so i tried to flash recover then it said no OS will boot in 5 seconds so i used a factory stock 4-5-91-stock-firmware-52952 from a link i got from this site so now its at this point here again :
OS will boot in 5 seconds
Press a Key to stop count down
Available modes are:
1 RSD
2 Fastboot
3NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery
10 Boot Android (No BP)
11 Device UID
12 Console=tty50,115200n8
13 Early USB Enumeration
14 BP Tools
current choice is mode:
RSD
Poweringon BP
Cold- booting Linux
Reading ODM fuse: 1
I have no idea what to do and i just got this atrix yesterday and suggestions or tips ?
yungwunxxx said:
Here's what happen i rooted, boot unlock the phone it was on 2.3.6 GB i installed beta-0.1.0-2d-cm-9.0.0-RC0-Atrix-KANG-signed.zip - ZIP archive and gapps problem orginally was there was no android market (play) and the interal sd card was not mounted i restarted the phone this menu came up (below ) when i went to 9 or 10 they said( Magic Value Mismatch) so i kept trying , nothing happen so i tried to flash recover then it said no OS will boot in 5 seconds so i used a factory stock 4-5-91-stock-firmware-52952 from a link i got from this site so now its at this point here again :
OS will boot in 5 seconds
Press a Key to stop count down
Available modes are:
1 RSD
2 Fastboot
3NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery
10 Boot Android (No BP)
11 Device UID
12 Console=tty50,115200n8
13 Early USB Enumeration
14 BP Tools
current choice is mode:
RSD
Poweringon BP
Cold- booting Linux
Reading ODM fuse: 1
I have no idea what to do and i just got this atrix yesterday and suggestions or tips ?
Click to expand...
Click to collapse
Considering you have fastboot and RSD you should be able to fix this... Firstly is your bootloader unlocked?
yungwunxxx said:
Here's what happen i rooted, boot unlock the phone it was on 2.3.6 GB i installed beta-0.1.0-2d-cm-9.0.0-RC0-Atrix-KANG-signed.zip - ZIP archive and gapps problem orginally was there was no android market (play) and the interal sd card was not mounted i restarted the phone this menu came up (below ) when i went to 9 or 10 they said( Magic Value Mismatch) so i kept trying , nothing happen so i tried to flash recover then it said no OS will boot in 5 seconds so i used a factory stock 4-5-91-stock-firmware-52952 from a link i got from this site so now its at this point here again :
OS will boot in 5 seconds
Press a Key to stop count down
Available modes are:
1 RSD
2 Fastboot
3NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery
10 Boot Android (No BP)
11 Device UID
12 Console=tty50,115200n8
13 Early USB Enumeration
14 BP Tools
current choice is mode:
RSD
Poweringon BP
Cold- booting Linux
Reading ODM fuse: 1
I have no idea what to do and i just got this atrix yesterday and suggestions or tips ?
Click to expand...
Click to collapse
Are you sure your bootloader is unlocked, does it show unlocked on the top left corner when you power up the phone. If it does, I think you flashed the rom on older recovery to update the recovery just follow these steps
Download automatic bootloader unlock from here http://forum.xda-developers.com/show....php?t=1182871, unzip it, you will find img file named " recovery-clockwork-4.0.1.4" replace it with romracer recovery you downloaded and rename the romracer recovery as " recovery-clockwork-4.0.1.4". Just to be safe even replace the "recovery-en-goapk-0630-1029" with rom racer recovery and rename it as "recovery-en-goapk-0630-1029". Open main and select option 6 and follow the on screen instructions.
Related
Tried Flashing the pudding unlock through rsd. Didnt go so well. I have the same failed to boot 0x1000 error along with:
no os detected going to rsd mode in 5 seconds press a key to stop count down:
1 Rsd
2 Flash boot
3 NvFlash
4 BP HW Bypass Rsd
5 BP Hw Bypass Qc DLOAD
6 BP HW diag & Boot Ap
7 BP HW Bypass BP only
8 BP Sw Bypass RSD
9 Android recovery
10 Boot Android (no BP)
11 Device UID
12 Console=****,***
13 Early Usb Enumeration
14 BP tools
Is there anything I can Do?
Sthony said:
Tried Flashing the pudding unlock through rsd. Didnt go so well. I have the same failed to boot 0x1000 error along with:
no os detected going to rsd mode in 5 seconds press a key to stop count down:
1 Rsd
2 Flash boot
3 NvFlash
4 BP HW Bypass Rsd
5 BP Hw Bypass Qc DLOAD
6 BP HW diag & Boot Ap
7 BP HW Bypass BP only
8 BP Sw Bypass RSD
9 Android recovery
10 Boot Android (no BP)
11 Device UID
12 Console=****,***
13 Early Usb Enumeration
14 BP tools
Is there anything I can Do?
Click to expand...
Click to collapse
I'm not entirely sure if this is what you need to do, but...I had 1.83 stock locked, then used the the OTA 2.3.4 zip, then I flashed the Pudding through RSD 5.3.1, and finally I had to use the "moto-fastboot oem unlock" command to unlock my device. I believe I got the same error before doing the unlock command. Confirm with someone else besides me. I don't want to be responsible for anything you do.
Sthony said:
Tried Flashing the pudding unlock through rsd. Didnt go so well. I have the same failed to boot 0x1000 error along with:
no os detected going to rsd mode in 5 seconds press a key to stop count down:
1 Rsd
2 Flash boot
3 NvFlash
4 BP HW Bypass Rsd
5 BP Hw Bypass Qc DLOAD
6 BP HW diag & Boot Ap
7 BP HW Bypass BP only
8 BP Sw Bypass RSD
9 Android recovery
10 Boot Android (no BP)
11 Device UID
12 Console=****,***
13 Early Usb Enumeration
14 BP tools
Is there anything I can Do?
Click to expand...
Click to collapse
If you can get into RSD protocol, flash 4.1.57 full sbf, update to 4.1.83, try again.
OSNPA said:
If you can get into RSD protocol, flash 4.1.57 full sbf, update to 4.1.83, try again.
Click to expand...
Click to collapse
I can get into RSD. But i updated through the OTA 2.3.4 zip. Im not to sure if its safe to flash older SBF files.
Its safe as long as u used kenneth version
Sent from my MB860 using XDA Premium App
unknownerr said:
I'm not entirely sure if this is what you need to do, but...I had 1.83 stock locked, then used the the OTA 2.3.4 zip, then I flashed the Pudding through RSD 5.3.1, and finally I had to use the "moto-fastboot oem unlock" command to unlock my device. I believe I got the same error before doing the unlock command. Confirm with someone else besides me. I don't want to be responsible for anything you do.
Click to expand...
Click to collapse
Thanks.. Had really nothing to lose, so i took the gamble. Finished with the fastboot unlock by navigating through the options. Unlocked the BL.Then the phone rebooted back to gingerbread.
Xenocyde said:
Its safe as long as u used kenneth version
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
No I updated through System recovery.
kenneth version worked for me!
Your lucky you didn't flash any sbfs because you would have hard bricked. Good call on finishing unlock that's exactly how I had to do it. For anyone else if you flashed the ota don't flash any sbfs.
Sent from my MB860 using Tapatalk
I really throws the same error, what should I do? what is the easiest method
fix? thanks
Jnewell05 said:
Your lucky you didn't flash any sbfs because you would have hard bricked. Good call on finishing unlock that's exactly how I had to do it. For anyone else if you flashed the ota don't flash any sbfs.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Just so we're all on the same page, it IS alright to flash fruit cakes. Just a side note...
in this thread talking about flash version 4.1.57 of Kenneth (correct?), someone could help me a bit because they do not find it.
Ok so before I take my phone to the shooting range tomorrow. Can someone help me please?
I got this when I tried to flash the [HOWTO] Root any Atrix after .sbf flash. I got the following message when the SBF failed:
SVF: 105:1:2
Failed to boot 0x1000
No OS detected, going to RSD mode
in 5 seconds
Press a key to stop count down
Available Modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery
10 Boot Android (No BP)
11 Device UID
12 console=ttyS0,115200n8
13 Early USB Enumeration
14 BP Tools
--------------------------------------
Vol Up to select, Vol Down
for next choice
Current choice is:
RSD
Starting Fastboot protocol support
If I'm screwed then. I'm done buying phones with f**king locked bootloaders.....
And now the phone restarted and it got this message:
SVF:105:1:2
Failed to boot 0x1000
PwrReason: PWR_KEY_PRESS
Starting Fastboot protocol support
Chubby_Skunk said:
Ok so before I take my phone to the shooting range tomorrow. Can someone help me please?
I got this when I tried to flash the [HOWTO] Root any Atrix after .sbf flash. I got the following message when the SBF failed:
SVF: 105:1:2
Failed to boot 0x1000
No OS detected, going to RSD mode
in 5 seconds
Press a key to stop count down
Available Modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery
10 Boot Android (No BP)
11 Device UID
12 console=ttyS0,115200n8
13 Early USB Enumeration
14 BP Tools
--------------------------------------
Vol Up to select, Vol Down
for next choice
Current choice is:
RSD
Starting Fastboot protocol support
If I'm screwed then. I'm done buying phones with f**king locked bootloaders.....
Click to expand...
Click to collapse
Choose option 2 and follow the instructions to unlock your bootloader. fastboot oem unlock then fastboot oem unlock xxxxxxxxxxxxx(your specific code goes there) it will then bootup.
Sent from my MB860 using XDA Premium App
jruweaver said:
Choose option 2 and follow the instructions to unlock your bootloader. fastboot oem unlock then fastboot oem unlock xxxxxxxxxxxxx(your specific code goes there) it will then bootup.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
God im a dumba**.......
thanks a bunch
Chubby_Skunk said:
God im a dumba**.......
thanks a bunch
Click to expand...
Click to collapse
how were you in "Failed to boot 0x1000" and then had fastboot ????
In my case I get "Failed to boot 0x1000" and some other message pops up at the end and then the phone shuts down
I had this same issue however when i try to unlock it i hear the usb disconnect noise and then it says "FAILED (remote00180001)). I did the exact same things as op up to this point,
maybe this would be the place to look - DEBUG] Calling all (AT&T) 0x1000 'hard' bricks
http://forum.xda-developers.com/showpost.php?p=15573674&postcount=1
I believe this issue has been resolved.
hakemcpu said:
In my case I get "Failed to boot 0x1000" and some other message pops up at the end and then the phone shuts down
Click to expand...
Click to collapse
BUMP... same here. trying to find a resolution before paying 125 for the insurance to replace it with a refurb.
itsauniquesn said:
BUMP... same here. trying to find a resolution before paying 125 for the insurance to replace it with a refurb.
Click to expand...
Click to collapse
Do you have the menu screen?
Sent from my MB860 using XDA App
Hello every one,
I upadated my Bell Atrix to 2.3.4 gingerbread and I rooted but when i try to copy some files to frameworks file but i can't because the file is read only
how i can solve this issue ?
Messi 10 said:
Hello every one,
I upadated my Bell Atrix to 2.3.4 gingerbread and I rooted but when i try to copy some files to frameworks file but i can't because the file is read only
how i can solve this issue ?
Click to expand...
Click to collapse
You need to remount the filesystem to be writable. Use "adb shell" to do the following:
Code:
$ su // Be sure to allow superuser if prompted on the handset
# /bin/mount -o rw,remount /system
At this point, you should be able to copy files to /system.
Hope this helps.
Thank you kwick60073
Now after I do your solution it is work but i tried to copy some files to lib folder but my atrix shutdown and i opened the battery when i return it my cellphone show just motorloa logo !
how i can solve this issue
regards
Messi 10 said:
Thank you kwick60073
Now after I do your solution it is work but i tried to copy some files to lib folder but my atrix shutdown and i opened the battery when i return it my cellphone show just motorloa logo !
how i can solve this issue
regards
Click to expand...
Click to collapse
Are you doing this on PC or terminal?
by using root explorer app
I think I soft bricked my phone
Hello Evryone, I was in the process of trying to root my phone and I think I soft bricked it. I had done this once before with another atrix that had to get replaced. This was before the Gingerbread update. I went to the same site and tried the same method and somewhere it messed up. I've scoured the internet for the past 2 days trying to find something similar but I haven't found something that matches my case to the point that I'm comfortable taking a risk trying to follow their steps to fix it. The reason I'm posting this is because most of the recovery fixes I've found on the internet are from March, before the gingerbread update.
So here is exactly what I'm looking at. I now have the following text on the screen:
SVF:105:1:2
Failed to boot 0x1000
No OS detected, going to RSD mode
in 5 seconds
Press a key to stop count down
Available modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery
10 Boot Android (No BP)
11 Device UID
12 console-ttyS0,115200n8
13 Early USB Enumeration
14 BP Tools
---------------------------------------
Vol Up to select, Vol Down for next choice
Current choice is mode:
RSD
Starting Fastboot protocol support
I have downloaded RSDLite5.4.4 and SuperOneClick. I'm just not sure how to use them. I recognize I'm a noob and I am sorry if this is a redundant post, but if I could get any help at all, I would greatly appreciate it. Thank you so much in advance.
CantoErgoSum said:
Hello Evryone, I was in the process of trying to root my phone and I think I soft bricked it. I had done this once before with another atrix that had to get replaced. This was before the Gingerbread update. I went to the same site and tried the same method and somewhere it messed up. I've scoured the internet for the past 2 days trying to find something similar but I haven't found something that matches my case to the point that I'm comfortable taking a risk trying to follow their steps to fix it. The reason I'm posting this is because most of the recovery fixes I've found on the internet are from March, before the gingerbread update.
So here is exactly what I'm looking at. I now have the following text on the screen:
SVF:105:1:2
Failed to boot 0x1000
No OS detected, going to RSD mode
in 5 seconds
Press a key to stop count down
Available modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery
10 Boot Android (No BP)
11 Device UID
12 console-ttyS0,115200n8
13 Early USB Enumeration
14 BP Tools
---------------------------------------
Vol Up to select, Vol Down for next choice
Current choice is mode:
RSD
Starting Fastboot protocol support
I have downloaded RSDLite5.4.4 and SuperOneClick. I'm just not sure how to use them. I recognize I'm a noob and I am sorry if this is a redundant post, but if I could get any help at all, I would greatly appreciate it. Thank you so much in advance.
Click to expand...
Click to collapse
Go into the dev forum and download the pudding file that corresponds with your phone. Flash it, then boot into fastboot and use the command fastboot OEM unlock
Sent from my MB860 using xda premium
Hey every one!
Today I decided to give a chance for the new CM7 you've posted here. I installed it but Suddenly a problem I couldn't solve appeared!!!
When I turn on my phone it automaticly goes to a window which looks like safe mode or something.
I cant attach an image yet because im a new user here... but Ill describe exactly what boots when I power the phone.
PwrReason: PWR_KEY_PRESS
OS will boot in 5 seconds
Press a key to stop count down
Available modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC LOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP only
8 BP SW Bypass RSD
9 Android Recovery
10 Boot Android (No BP)
11 Device UID
12 console=ttyS0, 115200n8
13 Early USB Enumeration
14 BP Tools
______________________________
Vol Up to select, Vol Down for next choice
Current choise is mode:
RSD
Any one had this problem before???
P.S: I think I know What I've done.... i accidentally partitioned the internal memory
frans7777 said:
Hey every one!
Today I decided to give a chance for the new CM7 you've posted here. I installed it but Suddenly a problem I couldn't solve appeared!!!
When I turn on my phone it automaticly goes to a window which looks like safe mode or something.
I cant attach an image yet because im a new user here... but Ill describe exactly what boots when I power the phone.
PwrReason: PWR_KEY_PRESS
OS will boot in 5 seconds
Press a key to stop count down
Available modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC LOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP only
8 BP SW Bypass RSD
9 Android Recovery
10 Boot Android (No BP)
11 Device UID
12 console=ttyS0, 115200n8
13 Early USB Enumeration
14 BP Tools
______________________________
Vol Up to select, Vol Down for next choice
Current choise is mode:
RSD
Any one had this problem before???
P.S: I think I know What I've done.... i accidentally partitioned the internal memory
Click to expand...
Click to collapse
- Re-flash the PDS image. http://forum.xda-developers.com/showthread.php?t=1131649
- Do not partition internal memory in the future!!
Very upset and would appreciate any help. Cant afford another phone now.
I have been a Atrix user for sometime now (MB860, ATT)
Was very happy with my phone, running on stock, no root, no unlocked bootloader.
My friend was playing with my phone and decided to download and install the OTA update to
2.3.6, 4.5.145
First run went fine. Today, I opened the back cover to clean some accumulated dust near the
mouthpiece. When I re started the phone, I got this
SVF:105:1:2
Failed to boot 0x1000
No OS detected going to RSD mode in 5 seconds
Press key to stop countdown
Available modes are
1. RSD
2. FastBoot
3. NV Flash
4. BP HW Bypass RSD
5. BP HW Bypass QC DLOAD
6. BP HW Diag & Boot AP
7. BP HW Bypass BP Only
8. BP SW Bypass RSD
9. Android Recovery
10. Boot Android (No BP)
11 Device UID
12. Console=ttys0 115200n8
13. Early USB enumeration
14. BP Tools
---------------------------------------------------------------------------------
Vol Up to select, Vol Down for next choice
Unable to understand what happened exactly....How do I get my phone back???
Would appreciate any help and advice. Not exactly a noob on software dev, though not
related to android.
Thanks in advance.
Thread Closed as a duplicate...