Hello i got a brand new S2 L9100 XWLPT 4.0.4 i did the firmware before i started doing anything, still when i was done i checked if i had root access with S2 root.exe and it it worked.
Sadly i could not get it to work with superuser i got no permission popup or anything and all the root apps kept telling me i had no root access so i decided to unroot and flash back to original and it worked fine.
Still i really want to root access and i will gladly spend some money to get if possible via apps.
If you want to easily obtain root permissions, it uses this tool http://www.unlockroot.com/ .....
saucefar said:
Hello i got a brand new S2 L9100 XWLPT 4.0.4 i did the firmware before i started doing anything, still when i was done i checked if i had root access with S2 root.exe and it it worked.
Sadly i could not get it to work with superuser i got no permission popup or anything and all the root apps kept telling me i had no root access so i decided to unroot and flash back to original and it worked fine.
Still i really want to root access and i will gladly spend some money to get if possible via apps.
Click to expand...
Click to collapse
If it was me I would flash a custom Kernel such as Siyah kernel because the stock kernel that comes with LPT firmware has the brick bug which BAD!
If you going to take the next step and root your phone, you really should remove that brick bug.
Siyah is probably most widely used custom kernel on the S2 but there are many out there and all good for differnet things
For easy root use method 1 from 1st guide in my signature. For free
Odoslané z GT-I9100 cez Tapatalk 2
saucefar said:
Hello i got a brand new S2 L9100 XWLPT 4.0.4 i did the firmware before i started doing anything, still when i was done i checked if i had root access with S2 root.exe and it it worked.
Sadly i could not get it to work with superuser i got no permission popup or anything and all the root apps kept telling me i had no root access so i decided to unroot and flash back to original and it worked fine.
Still i really want to root access and i will gladly spend some money to get if possible via apps.
Click to expand...
Click to collapse
Dear Saucefar,
Your firmware has brick bug on its kernel. This means it can potentially spoil your phone,if you need with it.
There is no need to panic though, just continue reading.
After rooting your device,
-Please do not wipe your DATA or FACTORY Reset your phone. Don't try it
- Flash a custom kernel immediately. I recommend Siyah or Speedmod kernel.
It's better to be safe than sorry
Swyped from my Samsung Galaxy SII
Related
Hi everyone I just bought a Galaxy S 2 four days ago. I rooted it with CF root via Odin. Thanks to Chainfire for that. What I wanted to ask was that the kernel just roots the phone and provides us with Superuser and all the rest of the apps. If I make a back up from CWM will it back up my whole Os which is Stock Samsung Touchwiz?
And also I would like to ask, Can I start flashing Roms now through CWM Flash zip option?
I am facing another problem I am trying to check for any updates but the problem is that when i try to check for updates it always says that it has failed even when i am connected to wifi!
Can anyone please help me with that too!
Thanks in advance!
frankimm said:
Hi everyone I just bought a Galaxy S 2 four days ago. I rooted it with CF root via Odin. Thanks to Chainfire for that. What I wanted to ask was that the kernel just roots the phone and provides us with Superuser and all the rest of the apps. If I make a back up from CWM will it back up my whole Os which is Stock Samsung Touchwiz?
Whole OS and apps but you need first time have an EFS backup seperate see threads .
And also I would like to ask, Can I start flashing Roms now through CWM Flash zip option?
Only if the rom instructs you to flash via CWM .
I am facing another problem I am trying to check for any updates but the problem is that when i try to check for updates it always says that it has failed even when i am connected to wifi!
OTA updates on phone do nor work use KIES but you have changed your firmware and codes may no longer match for KIES updates .
jje
Click to expand...
Click to collapse
JJE, sort your quoting out man xD
Anyway.
1) Yes if you make a backup in CWM it will back everything on your phone up, including everything in /system.
2) Yes you can start flashing ROMs.
3) Because you're rooted Kies stuff will not longer work.
Hi,
i bought a Samsung Galaxy S3 GT-I9300 about two months ago, it's a Spanish device. I think the device came with 4.0.1 update of ICS, some weeks after buying it got 4.0.4 update and then using CF-Root 6.4 and Odin 1.85 managed to get root access so i was able to install busybox and UMS application from xda forums. So everything was working fine. Then, about 3 days ago i got an update notification which showed me a message which said "Updates will be provided in the request order preference" or something like this, i tried to update a few times more but no luck, i always got the same messages so i thought i had to wait for 4.1 update to get published but anyway everything was working fine.
The curious thing is yesterday ( August 25, 2012), when i woke up i noticed a firmware update was ready to be installed so went through it (without uninstalling CF-Root 6.4, supersu, etc.) but the strange thing was, after the update completed fine, went to settings to check the version and i saw it still/again was 4.0.4 version of ICS. Also noticed Google Play Books and Google Play Movies got installed so on one hand it seemed everything went fine cause new apps were there and everything worked as expected but on the other hand i think i already had 4.0.4 update installed on the device. Till that point one can think i got confused on the versions i got installed before the update and no major problem here. After that, as i already had root access on the device, i went to check if i still could run UMS app but it complained about missing root access so as i did before that last Android update took CF-Root 6.4 and Odin 1.85 to flash the device and get root access again (Without removing any previous install of CF-Root, super su, busybox, etc. ) but had no luck, so now it's not possible for me get root access again but i'm also still wondering how is it possible that today's update left the phone with the same Android version as before the update.
The only explanation i can find is the phone came with 4.0 version, first update got me to 4.0.1 and today's update guided me to the 4.0.4 but i'm still wondering why root access is not working as it should.
So my questions are, did i got confused about each version update? Then why can't i get root access again just repeating the same first process?
When opening busybox i can read "Not Enough Free Space in /system". Opening /system directory with Root Explorer i can read 1.05GB used, 436.39MB free. Is it right /system directory takes up to 1GB of the space? Why Busybox thinks there is 0.0MB free there?
Hope someone can help. Thanks in advanced!
Thousands of posts say OTA updates may fail if the phone is rooted .
Usual is to fail part way through an update ..
Suggest wipe the phone flash stock rom with Odin then root .
jje
JJEgan said:
Thousands of posts say OTA updates may fail if the phone is rooted .
Usual is to fail part way through an update ..
Suggest wipe the phone flash stock rom with Odin then root .
jje
Click to expand...
Click to collapse
Thanks a lot for the info. Am i going to loose installed apps, system settings, etc when doing the suggested process? Do i really need to wipe the phone before flashing the phone? I suppose i can find stock rom for my model here in the forums. Thanks!!
Hi,
i'm looking for a stock firmware for my SGS3 BaseBand I9300XXLH1 but i'm not able to find it. I think the firmware which came with my phone is unbranded and from Spain. But the question which i'm wondering is, do i really need to flash the phone? Isn't possible to solve the issue in another manner? After updating through OTA the rooted device, what's supposed to went wrong?
Lastly, what's wrong on updating a stock rooted firmware using Phone/Android update system? Don't understand how doing that can break the phone forcing me to wipe data and flash the phone.
Hope someone can help. Thanks a lot!
PD: After rebooting the phone in recovery mode i can see stock recovery has been installed with last update. Hope someone can make a bit of sense about it all. Thanks in advanced.
sibok said:
Hi,
i'm looking for a stock firmware for my SGS3 BaseBand I9300XXLH1 but i'm not able to find it. I think the firmware which came with my phone is unbranded and from Spain. But the question which i'm wondering is, do i really need to flash the phone? Isn't possible to solve the issue in another manner? After updating through OTA the rooted device, what's supposed to went wrong?
Lastly, what's wrong on updating a stock rooted firmware using Phone/Android update system? Don't understand how doing that can break the phone forcing me to wipe data and flash the phone.
Hope someone can help. Thanks a lot!
PD: After rebooting the phone in recovery mode i can see stock recovery has been installed with last update. Hope someone can make a bit of sense about it all. Thanks in advanced.
Click to expand...
Click to collapse
Get your firmware from here http://www.samfirmware.com/
then use odin to flash it, I had the same problem
Baseband is modem not firmware.
jje
Sent from my GT-I9300 using xda premium
Thanks to both for your answers. Maybe it's stupid but i'm some what more peaceful knowing other people also happened the same issue although it still feels very weird. All i did is flashing with CF-Root 6.4.
I've been looking for the stock firmware which is supposed to came with my phone at sammobile site but i'm not able to find it, although at that point ( where the phone got the same update twice, 4.0.4 ) i don't think i can trust the information provided by the phone. Under phone settings i can see Model Number is GT-l9300 and Base Band Version is i9300XXLH1 but i can't find it no sammobile site. What i find at sammobile site is I9300XXBLH1 ( notice B letter ) but i think that before this weird behaviour happened the phone showed Base Band Version I9300XXBLFB.
Is it all possible or the weird one is me?
Kickasskev, did you got 4.0.4 update twice?
Thanks again to all!
REPEAT BASEBAND IS NOT FIRMWARE nor is it firmware version .
To locate firmware try CHECKFUS .
Or stock providers roms from the sticky on XDA .
jje
sibok said:
Hi,
i bought a Samsung Galaxy S3 GT-I9300 about two months ago, it's a Spanish device. I think the device came with 4.0.1 update of ICS, some weeks after buying it got 4.0.4 update and then using CF-Root 6.4 and Odin 1.85 managed to get root access so i was able to install busybox and UMS application from xda forums. So everything was working fine. Then, about 3 days ago i got an update notification which showed me a message which said "Updates will be provided in the request order preference" or something like this, i tried to update a few times more but no luck, i always got the same messages so i thought i had to wait for 4.1 update to get published but anyway everything was working fine.
The curious thing is yesterday ( August 25, 2012), when i woke up i noticed a firmware update was ready to be installed so went through it (without uninstalling CF-Root 6.4, supersu, etc.) but the strange thing was, after the update completed fine, went to settings to check the version and i saw it still/again was 4.0.4 version of ICS. Also noticed Google Play Books and Google Play Movies got installed so on one hand it seemed everything went fine cause new apps were there and everything worked as expected but on the other hand i think i already had 4.0.4 update installed on the device. Till that point one can think i got confused on the versions i got installed before the update and no major problem here. After that, as i already had root access on the device, i went to check if i still could run UMS app but it complained about missing root access so as i did before that last Android update took CF-Root 6.4 and Odin 1.85 to flash the device and get root access again (Without removing any previous install of CF-Root, super su, busybox, etc. ) but had no luck, so now it's not possible for me get root access again but i'm also still wondering how is it possible that today's update left the phone with the same Android version as before the update.
The only explanation i can find is the phone came with 4.0 version, first update got me to 4.0.1 and today's update guided me to the 4.0.4 but i'm still wondering why root access is not working as it should.
So my questions are, did i got confused about each version update? Then why can't i get root access again just repeating the same first process?
When opening busybox i can read "Not Enough Free Space in /system". Opening /system directory with Root Explorer i can read 1.05GB used, 436.39MB free. Is it right /system directory takes up to 1GB of the space? Why Busybox thinks there is 0.0MB free there?
Hope someone can help. Thanks in advanced!
Click to expand...
Click to collapse
0. Remove all root apps from your phone.
1. Back up your rooted rom in cWM.
2. Use triangle away to get rid of the traingle.
3. Format system and cache.
4. Flash an official rom.
5. You should have all your apps + settings on a stock rom without the status being 'modified'.
victorator said:
0. Remove all root apps from your phone.
1. Back up your rooted rom in cWM.
2. Use triangle away to get rid of the traingle.
3. Format system and cache.
4. Flash an official rom.
5. You should have all your apps + settings on a stock rom without the status being 'modified'.
Click to expand...
Click to collapse
I've used checkfus and now i know my firmware.
Thanks for the step by step tips, but my phone is not rooted so i cannot use cwm, triangleapp and so. I. Annot also remove cwm manager nor supersu. I suppose i'll have to flash stock firmware first of all. Am i right?
Pretty strange, first time i rooted the device through cf-root6.4 it run flawlessly, but now i had to remove the battery after flashing ( while device was on ) and enter into recovery mode by hand which started the rooting process.
Thanks!
Hi guys. I have a Samsung Galaxy s3 GT-i9300 running 4.1.1 Baseband 19300XXDLIB.
I have been trying and trying and trying for the last few days to root my mobile. I take care following all of the steps and I have tried every type of root program and files I think are available but even though they download to the phone and reboot into their custom recovery, then install the files needed to root, none of them have worked!!
It's strange because the phone is just unrootable it seems. I have tried several versions of Odin. I've tried what should be 1 click rooters but nothing works! The most recent files I have used to download to my phone via Odin were CF-Auto-Root-m0-gti9300, CF-Root-SGS3-v6.4, SuperOneClickv2.2-ShortFuse, SuperOneClickv2.3.1-ShortFuse and SuperOneClickv2.3.3-ShortFuse all of which have been recommended to me and I have strictly followed YouTube videos and written guides. I don't think I am doing anything wrong yet I still have no root access. The last root I tried installed a CWM app (I know it stands for Clock Work Mod but not sure what I am supposed to do with it) but not SuperSU which is supposed to come with it.
Please can someone help? I'm tearing my hair out here!
I should probably point out I am not using the stock ROM as I did manage to brick my phone at one point and had to install another firmware, although I would like to go back to my original firmware yet I am not sure what it was...is it possible to figure out what the stock firmware should be? The phone is unbranded from the UK.
Many thanks
I should probably point out I am not using the stock ROM as I did manage to brick my phone at one point and had to install another firmware, although I would like to go back to my original firmware yet I am not sure what it was...is it possible to figure out what the stock firmware should be? The phone is unbranded from the UK.
No you can only guess .
TO ROOT .
Factory reset the phone and install CF root 6.4 via Odin .
But its really pointless rooting when you don't have a clue as to why or what .
BASICS .
http://forum.xda-developers.com/showthread.php?t=1927113
jje
May also be because your computer hasn't been installed with the samsung drivers yet? Kies i think it's called..
Have you tried downloading supersu from the play store? And be sure to not try superuser but supersu.
I had the same thing with cf-autoroot. supersu wasn't there and I didn't have root. Tried several times, never worked. After that I tried rooting with the old cf-root that also installs cwm recovery. Recovery was there but no supersu and the phone didn't get root. Tried that several times too but that didn't help either, although that is how I rooted my phone successfully right after I had bought it. Went back to cf-autoroot, same result, no root. But as soon as I downloaded the app supersu manually and updated the binarys as it tells you to at first start, I had root.
Zelmer said:
May also be because your computer hasn't been installed with the samsung drivers yet? Kies i think it's called..
Click to expand...
Click to collapse
Kies is not required (and its junkie bloatware that doesn't properly clean itself up on uninstall anyway)
Windows can pull the drivers from WU.
You Sir, are a legend! Thank you very much, you have sorted my problem I had SuperUser instead of SuperSU like you stated. Who would've thought it'd be so easy to fix?
shamez23 said:
Have you tried downloading supersu from the play store? And be sure to not try superuser but supersu.
I had the same thing with cf-autoroot. supersu wasn't there and I didn't have root. Tried several times, never worked. After that I tried rooting with the old cf-root that also installs cwm recovery. Recovery was there but no supersu and the phone didn't get root. Tried that several times too but that didn't help either, although that is how I rooted my phone successfully right after I had bought it. Went back to cf-autoroot, same result, no root. But as soon as I downloaded the app supersu manually and updated the binarys as it tells you to at first start, I had root.
Click to expand...
Click to collapse
You should probably not just imagine that just because someone has a problem that they don't have a clue what they are doing. I have done this numerous amounts of times with several phones, my Samsung was just slightly more difficult since I had made an easy mistake by not taking note of my original firmware and by not realizing that I needed SuperSU and not SuperUser (which I'm sure is a common and easy mistake).
Try next time not to put a fellow site member down.
JJEgan said:
I should probably point out I am not using the stock ROM as I did manage to brick my phone at one point and had to install another firmware, although I would like to go back to my original firmware yet I am not sure what it was...is it possible to figure out what the stock firmware should be? The phone is unbranded from the UK.
No you can only guess .
TO ROOT .
Factory reset the phone and install CF root 6.4 via Odin .
But its really pointless rooting when you don't have a clue as to why or what .
BASICS .
http://forum.xda-developers.com/showthread.php?t=1927113
jje
Click to expand...
Click to collapse
I did actually install Kies but thanks for the help anyway
Zelmer said:
May also be because your computer hasn't been installed with the samsung drivers yet? Kies i think it's called..
Click to expand...
Click to collapse
Hi folks,
Ive been having a strange problem with a couple Galaxy Mega I9200. I have rooted both before without any problems using KINGO originally. The i decided to update both of them with version UBUCNA2. When i tried to re root them back, even though the process have run fine a couple times the phone is not rooting. At this point i dont know what else to do to try to root those phones. I have tried every single method around this forum i think not just KINGO this time. And have not been able to reach root the way it should. Titanium backup shows not able to aquire root priviledges, and other root apps also. Can someone please help me on this?? Keep in mind im not a newbie so dont give me the recovery method advice without something new or to use KINGO because ive have done that already. Thanks a lot guys
You upgraded your phones to the latest knox enabled firmware which has the knox bootloader. You cannot go back to an older firmware or flash a custom rom now.
To root, try the directions provided in this thread and use the melius3gxx files instead of meliusltexx.
Silesh.Nair said:
You upgraded your phones to the latest knox enabled firmware which has the knox bootloader. You cannot go back to an older firmware or flash a custom rom now.
To root, try the directions provided in this thread and use the melius3gxx files instead of meliusltexx.
Click to expand...
Click to collapse
Ok thanks, the phones already had the knox apk so my guess was that it was going to be the same thing. Thanks for clarifying that one. And thanks for the advice.
Thanks again, turns out the only thing that is failling root access is when i try to unlock the phone via box. For some reason when its checking for SU access it fails. But thanks anyway i managed to solve the Root problem.
root.
I rooted through Phill touch Recovery.
Hi Guys,
Noob asking a question thats probably been asked a billion times!
anyway I've owned an S3 for about 2 years and am looking to root for the first time, but i am having trouble doing so,
Phone: Samsung Galaxy S3 (UK Orange/EE Network)
Model Number: GT-19300
Android Version: 4.3
Baseband Version: 19300XXUGMK6 (is this improtant for root?)
Build Number: JSS15J.19300XXUGMK6 (is this important for root?)
i have tried to use Towelroot but it says "This phone isn't currently supported" (tried changing modstring but no joy) and i was wondering what way of rooting is best for my device? just doing some research before i try anything.
Also am i right in thinking that root just effects the permissions and as a result the apps and files wont be wiped from the device and the carrier settings wont be changed?
Thanks
Steve
gulleyHD2 said:
Hi Guys,
Noob asking a question thats probably been asked a billion times!
anyway I've owned an S3 for about 2 years and am looking to root for the first time, but i am having trouble doing so,
Phone: Samsung Galaxy S3 (UK Orange/EE Network)
Model Number: GT-19300
Android Version: 4.3
Baseband Version: 19300XXUGMK6 (is this improtant for root?)
Build Number: JSS15J.19300XXUGMK6 (is this important for root?)
i have tried to use Towelroot but it says "This phone isn't currently supported" (tried changing modstring but no joy) and i was wondering what way of rooting is best for my device? just doing some research before i try anything.
Also am i right in thinking that root just effects the permissions and as a result the apps and files wont be wiped from the device and the carrier settings wont be changed?
Thanks
Steve
Click to expand...
Click to collapse
Try this method >> http://forum.xda-developers.com/gal...3-07-2012-cf-root-6-4-supersu-cwm5-5-t1695238 << No apps or files will be wiped. I recommend the first thing for you to do when you have rooted and before modifying anything is for you back up everything including your efs.
tallman43 said:
Try this method >> http://forum.xda-developers.com/gal...3-07-2012-cf-root-6-4-supersu-cwm5-5-t1695238 << No apps or files will be wiped. I recommend the first thing for you to do when you have rooted and before modifying anything is for you back up everything including your efs.
Click to expand...
Click to collapse
thanks mate, can i verify this root after doing it by installing Root checker?, im also abit confused as to what "supersu" is as i have seen it mentioned on other root threads, admittedly i havent done much research on it, what is it?
also after i complete the root do i need to do anything to ensure all is working as it should ?
sorry to be a pain,
cheers
gulleyHD2 said:
thanks mate, can i verify this root after doing it by installing Root checker?, im also abit confused as to what "supersu" is as i have seen it mentioned on other root threads, admittedly i havent done much research on it, what is it?
also after i complete the root do i need to do anything to ensure all is working as it should ?
sorry to be a pain,
cheers
Click to expand...
Click to collapse
Imagine supersu as the guard at the gate waiting for any app wanting root permissions to ask if it can enter. Every time a root app asks to use root supersu will stop it and ask you (with a pop up) if it is safe to let this app through for it to use or modify anything in the root of your phone.
To check root just install any root app I suggest Titanium Backup because the first thing you should do is back everything up because messing with root can make your device unusable if you do something wrong.
Look at this >> http://forum.xda-developers.com/galaxy-s3/general/ref-understanding-basics-rooting-s3-gt-t2362743 <<
tallman43 said:
Imagine supersu as the guard at the gate waiting for any app wanting root permissions to ask if it can enter. Every time a root app asks to use root supersu will stop it and ask you (with a pop up) if it is safe to let this app through for it to use or modify anything in the root of your phone.
To check root just install any root app I suggest Titanium Backup because the first thing you should do is back everything up because messing with root can make your device unusable if you do something wrong.
Look at this >> http://forum.xda-developers.com/galaxy-s3/general/ref-understanding-basics-rooting-s3-gt-t2362743 <<
Click to expand...
Click to collapse
Thanks mate really helpful, i completed the process, Odin detected my phone, it said pass and all that jazz, the phone rebooted and i saw that CWM and SuperSU had been installed, i then went on SuperSU to update the binaries and is says "installation failed" i went on root checker (before i saw your last post) and it said that it has not rooted the phone
any additional advice would be great
cheers bud