Hi,
While Updating andriod version from 2.3.3 to 4.0.3 (ICS ALPHA1) at last, I tried to boot for geeting new version for first time. But it is stuck on logo Sony Ericsson. I have waited till 4 + hrs but not still stuck to that logo.
Even unable to Switch on the Mobile
sanjays183 said:
Hi,
While Updating andriod version from 2.3.3 to 4.0.3 (ICS ALPHA1) at last, I tried to boot for geeting new version for first time. But it is stuck on logo Sony Ericsson. I have waited till 4 + hrs but not still stuck to that logo.
Even unable to Switch on the Mobile
Click to expand...
Click to collapse
Sony ericsson logo explains everything. You didn't change the kernel
Sent from my X10i using xda app-developers app
jakuburban said:
Sony ericsson logo explains everything. You didn't change the kernel
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
Then how can i on my mobile i am unable to switch on it..... the red light blinks 3 times when i try on it.
sanjays183 said:
Then how can i on my mobile i am unable to switch on it..... the red light blinks 3 times when i try on it.
Click to expand...
Click to collapse
is your bootloader unlocked?
Sent from my Desire HD using xda premium
z28tovette said:
is your bootloader unlocked?
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
yes..
sanjays183 said:
yes..
Click to expand...
Click to collapse
you need to flash a kernel,like mentioned before.
Sent from my Desire HD using xda premium
sanjays183 said:
Then how can i on my mobile i am unable to switch on it..... the red light blinks 3 times when i try on it.
Click to expand...
Click to collapse
And charge the phone for 3 or 4 hours before flashing the CM9 Kernel, your battery is discharged.
TAL333 said:
And charge the phone for 3 or 4 hours before flashing the CM9 Kernel, your battery is discharged.
Click to expand...
Click to collapse
i tried to charge it when charges up the logo comes up , i am unable to switch off it and after sometime again it is going off.....
just start over.
flash the stock 2.3.3 firmware via flashtool. you can find ftf files to be flashed in the thread linked in my signature.
Also, dont use ICS alpha 1 by zdzihu as its not usable for daily basis.
Instead go for cm9, aokp, etc roms which are also ICS.
THeLogiC said:
just start over.
flash the stock 2.3.3 firmware via flashtool. you can find ftf files to be flashed in the thread linked in my signature.
Also, dont use ICS alpha 1 by zdzihu as its not usable for daily basis.
Instead go for cm9, aokp, etc roms which are also ICS.
Click to expand...
Click to collapse
i have downloaded and started flashtool with flash kernel as u said. now it shows booting DOOM Kernel from last 30 mins what to do now
sanjays183 said:
i have downloaded and started flashtool with flash kernel as u said. now it shows booting DOOM Kernel from last 30 mins what to do now
Click to expand...
Click to collapse
not the kernel.
I meant this.
http://forum.xda-developers.com/showthread.php?t=1749426
download any firmware from that thread(if you dont know that to download just download global generic),unzip it get a ftf file. flash it through flashtool. you will get back to stock SE 2.3.3 firmware
sanjays183 said:
i have downloaded and started flashtool with flash kernel as u said. now it shows booting DOOM Kernel from last 30 mins what to do now
Click to expand...
Click to collapse
Why are you using doom kernel?
You need kernel from FXP to run cm9 or stable ICS ROMs... search for proper kernel and flash....
Sent from my Transformer TF101 using xda app-developers app
sanjays183 said:
i have downloaded and started flashtool with flash kernel as u said. now it shows booting DOOM Kernel from last 30 mins what to do now
Click to expand...
Click to collapse
Hi ,
Now i have revert it to2.3.3 ginger bread and it is successfully running. Please suggest which andriod 4 version should i go for my mobile
there are lot of them.
cm9 is the basic by fxp.
all other ICS roms are based on cm9 by fxp.
you should try it yourself and see. Havent used them at all. some one else might help you in choosing
THeLogiC said:
there are lot of them.
cm9 is the basic by fxp.
all other ICS roms are based on cm9 by fxp.
you should try it yourself and see. Havent used them at all. some one else might help you in choosing
Click to expand...
Click to collapse
All firmfares are of 2.3.3 version i need 4 andriod version firmfares. please can anyone suggest something.....
sanjays183 said:
All firmfares are of 2.3.3 version i need 4 andriod version firmfares. please can anyone suggest something.....
Click to expand...
Click to collapse
you can find about it here:
http://forum.xda-developers.com/showthread.php?t=1783068&highlight=ics
THeLogiC said:
you can find about it here:
http://forum.xda-developers.com/showthread.php?t=1783068&highlight=ics
Click to expand...
Click to collapse
THanks all... i have now updated to 4.0.4 version....
sanjays183 said:
THanks all... i have now updated to 4.0.4 version....
Click to expand...
Click to collapse
glad to hear that.
Related
My friends,any one please help me ...my phone behaves peculiarly..i have full signal strength but my mobile shows selected network unavailable...
from my NEO V ICS reverted to GB
Try a different sim card. Maybe this particular sim card has a problem.
sdk16420 said:
Try a different sim card. Maybe this particular sim card has a problem.
Click to expand...
Click to collapse
I have changed many cards bro ..stil the same
Sent from my MT11i using xda premium
This happens to my Neo V too, since I have baseband .72.
When phone is in deep sleep mode only. When it wakes up, sometimes, it takes a few seconds to restore connection to Vodafone Portugal Network.
JohnnyCarlos said:
This happens to my Neo V too, since I have baseband .72.
When phone is in deep sleep mode only. When it wakes up, sometimes, it takes a few seconds to restore connection to Vodafone Portugal Network.
Click to expand...
Click to collapse
I m indian I have BSNL network..i have even switched networks ..but it still persists
Sent from my MT11i using xda premium
sudarsan s said:
I m indian I have BSNL network..i have even switched networks ..but it still persists
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
I think you misunderstood... I'm not talking about switching networks. I'm talking about downgrading baseband (from .72 to .70 or even .64).
sudarsan s said:
I m indian I have BSNL network..i have even switched networks ..but it still persists
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
what baseband are you on? was it working earlier?
JohnnyCarlos said:
I think you misunderstood... I'm not talking about switching networks. I'm talking about downgrading baseband (from .72 to .70 or even .64).
Click to expand...
Click to collapse
My baseband version is .56
Sent from my MT11i using xda premium
bombayboy said:
what baseband are you on? was it working earlier?
Click to expand...
Click to collapse
Wen I was on stock GB I had no problems ..then I updated to ics and then reverted to GB back by flashing the rom again
Sent from my MT11i using xda premium
How did you update to ICS? Flashed zip? Flashed entire .ftf? Updated trough SEUS or PCC?
How did you revert back to GB, by flashing zip in CWM, or restore backup in CWM, or full flash with .ftf?
Madfysh said:
How did you update to ICS? Flashed zip? Flashed entire .ftf? Updated trough SEUS or PCC?
How did you revert back to GB, by flashing zip in CWM, or restore backup in CWM, or full flash with .ftf?
Click to expand...
Click to collapse
I updated ICS thru SUES...and reverted to GB by flashing entire fft
Sent from my MT11i using xda premium
sudarsan s said:
I updated ICS thru SUES...and reverted to GB by flashing entire fft
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
You can try flashing baseband 70 or 64. The links are in neo section. A collection of kernels & baseband.
http://forum.xda-developers.com/showthread.php?t=1504700
Sent from my MT11i using Tapatalk 2
bombayboy said:
You can try flashing baseband 70 or 64. The links are in neo section. A collection of kernels & baseband.
http://forum.xda-developers.com/showthread.php?t=1504700
Sent from my MT11i using Tapatalk 2
Click to expand...
Click to collapse
Is the baseband version 64 and 70 rootable?i saw in some dev section its not rootable..
Sent from my MT11i using xda premium
sudarsan s said:
Is the baseband version 64 and 70 rootable?i saw in some dev section its not rootable..
Click to expand...
Click to collapse
Baseband itself doesn't have anything with rooting possibility.
Madfysh said:
Baseband itself doesn't have anything with rooting possibility.
Click to expand...
Click to collapse
yeah Madyfish
but we got to enlighten him.... that it is with the latest official firmware update
i remember my early days too (not that i am an expert now, am still a noob )
@ Sudarsan,
you can flash the baseband as per your preference and see if you phone indeed works as a phone rooting can be done later
bombayboy said:
yeah Madyfish
but we got to enlighten him.... that it is with the latest official firmware update
i remember my early days too (not that i am an expert now, am still a noob )
@ Sudarsan,
you can flash the baseband as per your preference and see if you phone indeed works as a phone rooting can be done later
Click to expand...
Click to collapse
Thank u,very much ..iwill try the above.said
Sent from my MT11i using xda premium
I have na11 kernel and minicm7 2.2.1 custom rom.To flash naA 12 do I need to first go back to stock rom ? Or I can flash the kernel with flashtool on minicm7 custom rom.
playcool69 said:
I have na11 kernel and minicm7 2.2.1 custom rom.To flash naA 12 do I need to first go back to stock rom ? Or I can flash the kernel with flashtool on minicm7 custom rom.
Click to expand...
Click to collapse
It's an upgrade to your current kernel, it should just flash fine and your rom should keep working.
playcool69 said:
I have na11 kernel and minicm7 2.2.1 custom rom.To flash naA 12 do I need to first go back to stock rom ? Or I can flash the kernel with flashtool on minicm7 custom rom.
Click to expand...
Click to collapse
First do a backup via cwm and then flash kernel nAa-12 wipe cache via cwm after flash and then restore your rom. And your done
Sent from my E10i using xda app-developers app
SmG67 said:
It's an upgrade to your current kernel, it should just flash fine and your rom should keep working.
Click to expand...
Click to collapse
Thank you!!
Is it possible to update the kernel through the phone or we need a computer to do it?
Sent from my E10i using xda app-developers app
terislg said:
Is it possible to update the kernel through the phone or we need a computer to do it?
Sent from my E10i using xda app-developers app
Click to expand...
Click to collapse
Kernels always need to be flashed with a computer.
Thx mate
Sent from my E10i using xda app-developers app
SmG67 said:
Kernels always need to be flashed with a computer.
Click to expand...
Click to collapse
Sure dude? Can't we upgrade replacing the ftf somewhere with shell and modifying some init config file, as we do on linux?
If not, i wonder why the MiniCM notification has the download option.
mortadelax said:
Sure dude? Can't we upgrade replacing the ftf somewhere with shell and modifying some init config file, as we do on linux?
If not, i wonder why the MiniCM notification has the download option.
Click to expand...
Click to collapse
MiniCM is the ROM, not the kernel, If you have an official CM-ROM on your phone you can get OTA updates for that, but that doesn't include the kernel of your phone.
The main reason you can't update kernels without a computer is because your phone has to be in flash-mode in order to reach the parts where the kernel and loader are stored, and if your phone is in flashmode, you can't access it manually to edit anything.
SmG67 said:
MiniCM is the ROM, not the kernel, If you have an official CM-ROM on your phone you can get OTA updates for that, but that doesn't include the kernel of your phone.
The main reason you can't update kernels without a computer is because your phone has to be in flash-mode in order to reach the parts where the kernel and loader are stored, and if your phone is in flashmode, you can't access it manually to edit anything.
Click to expand...
Click to collapse
Thanks. Didnt know the flashmode thing.
By the way, i know minicm is the rom, but the minicm notification has both rom and kernel (nAa kernel) update notication. It is a cm based rom.
Sent from my U20i using xda app-developers app
mortadelax said:
Thanks. Didnt know the flashmode thing.
By the way, i know minicm is the rom, but the minicm notification has both rom and kernel (nAa kernel) update notication. It is a cm based rom.
Sent from my U20i using xda app-developers app
Click to expand...
Click to collapse
Yes, i know minicm is cm-based, but it's an 'unofficial' port, so i'm not sure if you actually get Over-The-Air updates (where the relevant parts of the ROM are updated on the fly), or just notifications that updates are available and that you can download them from somewhere, or if you even get notifications, i haven't used it long enough to find out
I dowloaded the kernel with the notification to sd... But need flashtool anyway. Maybe it is for quick flash because don't have to visit xda thread.
Thanks for answers
that does make it a bit easier i suppose anyway, you're welcome
It is actually possible to flash kernels without a PC. It just hasn't been coded into our CWM and the correct way hasn't yet been found/added for the Mini/MiniPro. It is possible but you'd need a JTAG as you'd probably kill the phone quite a few times!
Hello, i need some help.
The kernel i have been trying to use is: X10_4.1X_CMX10_bootmanager_v13 + v_14 and alot more, but i can't come in to the recovery after changing kernel. but with the "Stock" kernel in flashtool i can get into recovery. cwm and the other, but then i can't install the rom i want, i need to install the kernel above before i can install the rom. Sry for my bad english, but i hope u understand.
bump since i edited.
Comeone guys, someone know why i cant get into cwm after changing kernel
The problem is you are trying to install kernels that is not supported by your ROM.
Have you unlocked your bootloader? Check it using S1Tool
I had the same problem with that kernel I couldn't get into recovery. Which rom are you trying to install JB? Or ICS? Try armin kernel for ics or jb and see that's what I used
Sent from my X10i using xda premium
dunc4n88 said:
I had the same problem with that kernel I couldn't get into recovery. Which rom are you trying to install JB? Or ICS? Try armin kernel for ics or jb and see that's what I used
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Im on donutHD now and original kernel that comes when i unlocking bootloader with flashtool, everything goes ok when uim flashing kernel but it's just bootlooping and i cant get into recovery with all kernels i have tried. i cant try to install anyrom because just of that, but it's slimbean, and paranoid android i wan't to install.
jai554 said:
The problem is you are trying to install kernels that is not supported by your ROM.
Have you unlocked your bootloader? Check it using S1Tool
Click to expand...
Click to collapse
Yes i have unlocked my bootloader.
baxee said:
Yes i have unlocked my bootloader.
Click to expand...
Click to collapse
try to install CM7 based rom then flash DoomKernel... see if it works
Yeah just remembered you have to flash a cm7 kernel before flashing any sort of cm10 kernel
Sent from my X10i using xda premium
jai554 said:
try to install CM7 based rom then flash DoomKernel... see if it works
Click to expand...
Click to collapse
dunc4n88 said:
Yeah just remembered you have to flash a cm7 kernel before flashing any sort of cm10 kernel
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Someone have the link? can't find.
baxee said:
Someone have the link? can't find.
Click to expand...
Click to collapse
Try search Zdzihu-003 CM7.1
jai554 said:
Try search Zdzihu-003 CM7.1
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1213843
There? And shall i flash both rom and kernel`? then after flash the kernel and rom i want? thx for the help dude.
Problem solved, thx guys.
i have tried to flash several roms. i unlocked the bootloader with flashtool and installed bussybox and root. but when i try to flash a rom and install it i get stock at the loading screen. i installed Naa kernel. so i really dont now what to do now.
dgaa1991 said:
i have tried to flash several roms. i unlocked the bootloader with flashtool and installed bussybox and root. but when i try to flash a rom and install it i get stock at the loading screen. i installed Naa kernel. so i really dont now what to do now.
Click to expand...
Click to collapse
seems u didnt flashed the kernel properly
and which kernel u flashed ?
p.s.
u posted in wrong section
Sent from my U20i using Tapatalk 2
i did use U20_nAa-jb-03_2.6.29.6-nAa-jb-03
dgaa1991 said:
i did use U20_nAa-jb-03_2.6.29.6-nAa-jb-03
Click to expand...
Click to collapse
did u tried repairing it back via sony companion ?
and which rom did u used ?
Sent from my U20i using Tapatalk 2
AW: Cant start my phone after flashing....
Have u wipe data and cache? If not, Boot into recovery and Marke the wipes. than restart again.
Sent from my U20i using xda app-developers app
Brother, you flashed a jelly bean kernel so you can just run CyanogenMod10 based roms(android 4.1.2 roms)
If you're going to flash a gingerbread rom(CyanogenMod7) (android 2,3) you must use a gingerbread kernel like : "nAa 14 gingerbread for x10mini"
Good Luck
sent via ULTIMATE GB beta
How long is usually installing a rom takes? Coz after i install custom mod from cmw its restarted and at when its come to boot it loading for somewhat forever..im afraid is gonna brick if i force it to shut down
katshura007 said:
How long is usually installing a rom takes? Coz after i install custom mod from cmw its restarted and at when its come to boot it loading for somewhat forever..im afraid is gonna brick if i force it to shut down
Click to expand...
Click to collapse
Wait a couple of minutes if the phone don't reboot try to reflash the rom again..
Sent from my SGH-I997 using xda app-developers app
alexischino said:
Wait a couple of minutes if the phone don't reboot try to reflash the rom again..
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
Im already in booting screen actually, but i already waiting for half hour and still booting..
btw installing infamous custom rom btw have any idea? im instaling it from rooted stock rom, should i upgrade it to ics first? if yes, want version should i go?
katshura007 said:
Im already in booting screen actually, but i already waiting for half hour and still booting..
btw installing infamous custom rom btw have any idea? im instaling it from rooted stock rom, should i upgrade it to ics first? if yes, want version should i go?
Click to expand...
Click to collapse
If you're still on HC, its best to upgrade to stock ics first.
Sent from my GT-P7500 using Tapatalk HD
eushaun99 said:
If you're still on HC, its best to upgrade to stock ics first.
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
That's correct. Stock ICS will give you the correct Bootloader required for the custom ROM you wish to to flash.
Cheers.
Sent from my GT-P7500 using xda app-developers app
stock 4.0.4
then custom rom + gapps....dont forget right gapps
recovery 6.0.3.3 from droidbasement is what i use