Related
hi could someone plse help i installed wm6 on my ameo the t mobile friendly rom but now i cant get a fix on my wifi ive got a belkin n1 router i know thats working because my universal works fine. i also tried pocket hack master to try and slow down the cpu on the ameo becase i found it in another forum but still could not get it to work. any suggestions plse .thanks in advance
Does the WiFi light flash when you switch WiFi on?
Do you have the latest radio rom (1.45.00)?
Can you ad-hoc WiFi between your Athena and Universal?
Have you tried looking for updated firmware for your Belkin?
The only reason I ask, is because I couldn't connect to my WiFi network either but my Universal could too. Did all of the above and it works fine now
hey yoor right the wifi light isnt flashing wat to do. pleasse post have to go will try wen i get back thanks
The first thing I would do is flash the radio Rom to 1.45.00.
http://forum.xda-developers.com/showthread.php?t=319993&highlight=radio
still not working
hi tried everything you guys suggested but no luck also tried flasing all the roms i could find with no luck can somone post me a link please who has a t mobile ameo of the rom they are using and wifi is working properly.thanks in advance
If you have re-flashed the Radio rom and WiFi still doesn't work, I would say your device is faulty. Send it back for repair.
if this is the case anybody know where i can get the t mobile rom from for waranty.thanks
In the Members FTP area
got the light to flash but still it tries to connect but no luck the one on the ftp sight is german rom or am i looking in the wrong place.ok tried the ameo at me cousins and it works fine his hermes wont work at mine my unieversal does so does my psp so its goto to be a isue with my belkin n1 router.he has a belkin pre n g + and all our phones are working fine on it. what do you guys sugest
Belkin & wm6
Hi,
I'm also suffering from this issue. Please assist before I'm forced to revert back to a previous unit and suffer all the associated reconfiguring...yawn. Whats the issue?
moh6299 said:
got the light to flash but still it tries to connect but no luck the one on the ftp sight is german rom or am i looking in the wrong place.ok tried the ameo at me cousins and it works fine his hermes wont work at mine my unieversal does so does my psp so its goto to be a isue with my belkin n1 router.he has a belkin pre n g + and all our phones are working fine on it. what do you guys sugest
Click to expand...
Click to collapse
Hi
I use Belkin and and PK3.0 wm6 with WPA-TSK security enabled Wi-Fi connection to my athena no problem. You may have set up 54g connection only enabled in the router settings.
on the device start>> settings>> connections>>Wi-FI>>network Adapters then select IEEE 802........ and Select "The internet". Then press ok and reset the device
Belkin routers sometimes don't connect to the devices if you select higher security in wireless settings in the router. Therefore check the router's wireless settings.
set the device settings as above then Try modify settings in the router's wireless security settings. then save and restart the router and try connecting to the device.
I hope this will help you to connect to the Wi-fi internet. good luck
I dont know if this will help, but I have trouble connecting to my netgear router at home. It connects, but then shortly after, although still connected, loses its connectivity to the internet. To fix it, I have to turn off the power save mode to the wifi card and have the slidy bar to maximum performance to keep a connection
My preferred setup for WIFI
First and foremost, do a hard reset on the router by holding in the reset hole at the back for a few seconds until the lights blink.
Make sure security is OFF on the router and try to connect to it with your Ameo. If it works then yeehaa.....
The best setup I have at the moment with my router is with security DISABLED (believe it or not).
I then log into the router on my main pc and add a MAC FILTER list (i.e. the MAC addresses of the devices I wish to be allowed to connect to my router)
People may see a security-free router but they will NOT be able to connect unless their MAC address is on my router's list.
leoni1980 said:
First and foremost, do a hard reset on the router by holding in the reset hole at the back for a few seconds until the lights blink.
Make sure security is OFF on the router and try to connect to it with your Ameo. If it works then yeehaa.....
The best setup I have at the moment with my router is with security DISABLED (believe it or not).
I then log into the router on my main pc and add a MAC FILTER list (i.e. the MAC addresses of the devices I wish to be allowed to connect to my router)
People may see a security-free router but they will NOT be able to connect unless their MAC address is on my router's list.
Click to expand...
Click to collapse
Errr - if they want to, yes they will. All they need do is scan the network for an active MAC address and then spoof their own MAC address to one already active on the network. OK, it's unlikely anyone would go that far but I would much rather simply use the security!
Hi,
so kernel sources are released. Is there any fix for hero's wifi problems? I mean dropping connection to AP. It is so annoying, I tried to do everything: change channel, mode, encryption... Nothing helped. It is Linksys wrt160nl. The same applies to other networks (some public hot spots).
I never had this problem with my Linksys WRT54GL...
mopodo said:
I never had this problem with my Linksys WRT54GL...
Click to expand...
Click to collapse
Could you paste your wifi settings? (mode, encryption mode, channel)
Using the Modaco custom ROM 2.8 (never had problems with modaco ROM and generic)
Router: Linksys WRT54GL running Tomato 1.25 firmware
Wireless Mode: Access Point
B/G Mode: Mixed
Channel: 1 - 2.412 Ghz (try a free one)
Security: WPA / WPA2 Personal
Encryption: AES
Group Key Renewal: 3600 seconds
No Mac Filter
Under Advanced Settings I changed "Transmit Power" to 251mW for a better signal, the rest are default values.
Try to update your router firmware
Are you alone with this problem?
greetz
In case you haven't done so yet. Check out the Wifi Sleep Policy (access by pressing menu when you are in wifi menu). Normally the Wifi is turned off then the screen is turned off which can cause problem.
Similar problem with netgear wnr2000
mopodo said:
Using the Modaco custom ROM 2.8 (never had problems with modaco ROM and generic)
Router: Linksys WRT54GL running Tomato 1.25 firmware
Wireless Mode: Access Point
B/G Mode: Mixed
Channel: 1 - 2.412 Ghz (try a free one)
Security: WPA / WPA2 Personal
Encryption: AES
Group Key Renewal: 3600 seconds
No Mac Filter
Under Advanced Settings I changed "Transmit Power" to 251mW for a better signal, the rest are default values.
Try to update your router firmware
Are you alone with this problem?
greetz
Click to expand...
Click to collapse
Hi got similar problem with my router netgear wnr2000.what i found funny is that when i reset the router, the phone connects perfectly to the router, but after abt 24hrs or so, it fails to connect.even if i reboot my phone, or reset the connection on phone.fails to connect.it will only connect when i reboot the router. i will try the 'aes' encryption n see if that helps.will update if it works
Thanks for your replies. Please could other members share their experiences, used options and solutions. This issue is too common to simply forget it. I am trying to find some kind of pattern or special options, it requires.
i dont have a problem with wifi apart from the wont find or connect to n-range device other wise i use wifi all the time it never drops, on stock orange uk firmware
I have a Sitecom WL-173 router.
I cannot connect at all. I can, but only with no or WEP security. That is no option for me.
When I use WPA or WPA2 my Hero does view my network, but does not connect.
I called HTC about this problem. He told me that they do not support all routers. He could not tell me which they support and which not.
mopodo said:
B/G Mode: Mixed
Click to expand...
Click to collapse
I also have the same problem. The way to solve it is to change the above setting to 'G' only. Not mixed/Hybrid.
Cheers!
I have not had any problems trying to connect to WiFi networks, until i went over to my mates place where he has the Virgin 50MB B-Band and also a D-Link wifi-N router, and my Hero could no see the network at all, even though his iPhone connected straight away.
markoc84 said:
..., even though his iPhone connected straight away.
Click to expand...
Click to collapse
Augghhhhh... that hurts. Please, do not curse in this forum
tembares said:
Augghhhhh... that hurts. Please, do not curse in this forum
Click to expand...
Click to collapse
I'm sorry, it hurt even more when i was sitting there pissed off that my Hero wouldnt connect to the Wifi!!!
I have Virgin 50meg at home no problem at all, went to my GF's who has basic Virgin cable 10meg on netgear G and would not connect at all.
No idea why, as it should be all fine!
I have the same problem. It is so ****in annoying. My router is a Linksys WRT54G with Tomato firmware v1.25. Router is in "G only mode", WPA-2 PSK-AES security, I've set a static local IP for the phone, the phone's wireless is set to always ON... I basically tried everything I could think of. Ended up rooting the phone and installing Modaco 2.9... but didn't change anything. The only way I can get it work again when it drops is shut the Wi-Fi off then on...
Worst of all this is the problem seems widespread (but not universal)... What the **** does HTC think putting a ****in smartphone on the market with defective Wi-Fi... This is non-sense.
I really hope someone comes up with a fix or HTC updates this... otherwise we might want to start thinkin bout class action.
[email protected] said:
I also have the same problem. The way to solve it is to change the above setting to 'G' only. Not mixed/Hybrid.
Cheers!
Click to expand...
Click to collapse
Is it a router setup or a Hero setting?
Pleaes explain if it's one of the options
probs here too ...
Linksys WAP54G v3.1
vs
HTC Hero
was working perfectly for first month or so, but has been getting worse and worse. ie, for a few weeks it would see the wifi but would usually fail to connect. now I'm lucky if it can see it at all!
have reflashed the wap with dd-wrt and experimented with a lot of settings. no diff.
have reflashed the hero with hero21 comunitry v1.6. no diff. (and also latest radio)
it just starts and stops when it feels like it.
oh, and my eeepc works fine on the same wifi, so I know it's not some wap screw up.
tried every tip I can find like 'use mixed mode' or 'g only', etc etc.
I am starting to think it's a hardware fault?
Same problem
Siemens Gigaset Tiscali modem with wpa psk2 tkip and T-mobile hero rom.
Sees the modem and connects with security first time but then says 'remembered out of range' on wifi settings but interestingly in wifi buddy it constantly has the syncing symbol next to the network.
Really annoying.
I've tried WEP and security off, wireless g only etc etc.
I have problems too but seems different to yours... but who knows : in fact i can't connect to wifi when the SSID is masked. Even if - or course - i put manuualy the ssid before with the good wep key. It happens on a livebox ( orange box )... but if i press the button to show the wifi network - it has to be made when you connect a device for the first time on this box - then it connects to the network... else it tells me that the network is out of range...
So does the wifi on hero has problem with masked SSID ? To compare i never had this problem - on the same box - with the touch diamond and the touch hd... and at home, not masking the ssid, the connection is ok without doing anything.
Ciao
Fred
I had the same problem with a Zyxel 660 router. I was able to connect to the wifi (WPA/PSK enable) but there was no data transfer possible.
So I updated the Radio ROM to the 63.18.55.06JU_6.35.08.29 version and it solved the problem.
Hi just received my GTablet and have installed ClockworkMod v08. Next, I am attempting to install the TNT Lite Rom but I am having trouble connecting to my home router.
The response I keep getting when trying to connect is to the point of "Obtaining IP address.." then it disconnects. I am sure it's not the wireless router but just to be eliminate possibilities, I've even switched off all the security with connect to the router, but the sames results. It keeps trying to re-connect. I can easily connect with my other PCs and printers.
Any ideas? Thanks in advance.
Hello there,
did you ever solve your wifi problem, I am currently running the latest TnTlite, and this just started happening to me as well. It just hangs in Obtaining Ip then it disconnects.... I have never had this problem before in fact was online on the tab last night, now it seems i cannot connect... I will see if I can connect in another location hope nothing happened to the Tab..... BTW I tried restarting as what was suggested but that did nothing for me also....
Are you broadcasting your SSID?
Can you take the tablet somewhere else and try connecting at a Star Bucks, or a library, or something. See if it connects ok there?
Also, if it doesn't connect anywhere. Try flashing a different ROM to see if it is just that one.
I've had the same problem. I do not seem to be able to connect to any wifi that is encrypted with WPA. At work, we are WPA and I cannot connect at all. At home, I have WEP and can connect. I thought it might be something with the wifi settings on the tab, and have searched and searched and cannot find anthing.
By the way, this is my third tab and none of them could connect to a WPA encrypted router. The first two I returned as defective. IF there is an answer, I would love to hear about it.
Also, this is my first android device. I have been messing with Windows phones for a long time...thanks to the great people on this site.
Sorry to hear about your wifi problems. Just to let you know my experiences, I've (in the week I've owned my tablet) run TnT, VegaN and cyanogen (latest of each) and have never had a problem connecting to my home wifi - I do not broadcast my SSID at all and use WPA2/PSK encryption. You both mention WPA - can either of you try WPA2/PSK?
But on saying all of that, if you can't even connect to your wifi point without any security involved, it sounds either:
1) Hardware - faulty tablet but you said you're on your third so that sounds unlikely. Remember, while the tablet supports wifi G/N it does so over 2.4Ghz so if you have a router that only does 5Ghz or is set to work exclusively over 5Ghz, your router will not see your tablet
2) Software related - Have you reflashed your kernel at all? Did you possibly install a kernel (not rom) that does not have wifi drivers installed or something similar?
I hope something above might help you....
I was never able to connect to the wireless router. I shut all the security off, reset the router, rebooted the tablet but still the same results, "obtaining IP address" then it fails and tries again. I could connect to my neighbors Linksys so I know the tablet wifi is ok. I also so know that the router was ok since it had been serving my other PCs & printers for a number of years. It just wouldn't connect to each other.
The problem still persists.
+++++++++++++++++
Running TNT Lite 4.2.1
bevbeng said:
I was never able to connect to the wireless router. I shut all the security off, reset the router, rebooted the tablet but still the same results, "obtaining IP address" then it fails and tries again. I could connect to my neighbors Linksys so I know the tablet wifi is ok. I also so know that the router was ok since it had been serving my other PCs & printers for a number of years. It just wouldn't connect to each other.
The problem still persists.
+++++++++++++++++
Running TNT Lite 4.2.1
Click to expand...
Click to collapse
You didn't answer in your response above, is your router a 5Ghz router or 2.4Ghz? Could the frequency of your router be causing your problem here? Remember the tab only supports 2.4Ghz frequencies
1. if your tablet can connect to your neighbor's router, then problem lies between your router and the tablet.
2. is your router a linksys? what wireless router are you trying to use?
3. are you using mac address filtering? is dchp enabled on the router or by some sort of home server?
4. your tablet can see your router, but for some reaon they cant agree on how to talk to each other. i'm on a linksys wrt54gsv4 and havent had a problem, not with default settings or wpa2 or mac filtering or the custom firmware i eventually installed on it (ddwrt), tomato)
Sent from my GTablet-TnT-Lite using Tapatalk
bevbeng said:
Hi just received my GTablet and have installed ClockworkMod v08. Next, I am attempting to install the TNT Lite Rom but I am having trouble connecting to my home router.
The response I keep getting when trying to connect is to the point of "Obtaining IP address.." then it disconnects. I am sure it's not the wireless router but just to be eliminate possibilities, I've even switched off all the security with connect to the router, but the sames results. It keeps trying to re-connect. I can easily connect with my other PCs and printers.
Any ideas? Thanks in advance.
Click to expand...
Click to collapse
You are ATTEMPTING to install TnT ROM? You dont need the Internet connection, just sideload it then install. Am i Right?
Then after you install the TnT rom, sideload also the Kernel TnT base with wifi fix.
http://forum.xda-developers.com/showthread.php?t=895825
Hope this will solve your problem.
Good luck
powercrazy said:
You didn't answer in your response above, is your router a 5Ghz router or 2.4Ghz? Could the frequency of your router be causing your problem here? Remember the tab only supports 2.4Ghz frequencies
Click to expand...
Click to collapse
I have an older Microsoft 2.4Ghz B/G wireless Router. I'll try to sideload the Kernel TNT base with the WiFi fix.
Thanks for the tips.
Since the original posting I have got TNT Lite installed (using my neighbors router)
bevbeng said:
I have an older Microsoft 2.4Ghz B/G wireless Router. I'll try to sideload the Kernel TNT base with the WiFi fix.
Thanks for the tips.
Let us know if it solve. If not, I think you have defective unit.
Goodluck!
Click to expand...
Click to collapse
Something else occurs to me out of pure ignorance. I'm not sure how Android stores profile information. But I know with both mac and windows I've had occasion where "forgetting" the network and letting the device rediscover it has solved problems.
It sounds like you've been down that road already. However, it does bear asking. It's the more obvious things we often forget to consider.
Well it looked like the tablet needed to be reset a couple of times as i was just online with it... now the tab just froze, shut off and now i cannot turn it on... off to another thread to see what to do now... god i hope this thing is not bricked....any suggestions on what is a good thread would be appreciated... off i go.......
edit: found a thread now to find the internal reset button. thanks to all at xda....
RyuFDAC01 said:
Well it looked like the tablet needed to be reset a couple of times as i was just online with it... now the tab just froze, shut off and now i cannot turn it on... off to another thread to see what to do now... god i hope this thing is not bricked....any suggestions on what is a good thread would be appreciated... off i go.......
edit: found a thread now to find the internal reset button. thanks to all at xda....
Click to expand...
Click to collapse
Try to hold the power button for a long time and maybe it may turn back on. Before doing your last resort (disecting the tablet).
I had a problem with my wifi going into loops when I first got the unit. It would show it connecting/disconnecting/connecting/etc as described in the first post.
I had another router (both the same makes - Linksys WRT54G but different model numbers) so I tested the other router and I connected fine. I haven't gone back to test the first router yet and I am using the 2nd one.
The router I couldn't connect to has DD-WRT micro on it, and I haven't had problems connecting other wireless devices to. The one that is working fine with the g-tablet now has Tomato on it (it is a lower version number which supported Tomato).
Too bizarre... I now have this problem.
I received my gtablet today and installed clockwork mod recovery and vegan-tab ginger RC 1. Or, essentially, I followed the instructions here and got everything working. http://forum.xda-developers.com/showthread.php?t=865245
Wifi worked fine until the evening. Wifi is on, and in the settings under the SSID of my wifi network, it says Obtaining IP address for a minute until it says Disabled, network in range. I've done some common trouble shooting, like restarting, turning wifi off and on, forgetting the network and reentering password. That didn't work. My cell phone has a mobile hotspot feature and the gtablet CAN join that. I wonder what gives... I hope someone can help.
(This could be just coincidence, but it's about when I powered up my desktop computer. The desktop connects to the internet through a DMZ router that has a wired connection to the wifi router in another room. The desktop is now off and the gtablet still has this problem.)
Ok. Resetting my router fixed it. I never thought that my router could just "dislike" one particular device. I thought for sure something had to be wrong with the device. Forgive my ignorance!
G Tablet Wifi
I do not transmit my SSID and this has never been a problem with any of our laptops or netbooks. When I first received my G Tab and tried to connect to my network, even though I had entered the SSID and Passphrase correctly, it still would not connect. As soon as I set my wireless router to transmit the SSID the G Tab connected without any problems.
This is the first time I've encountered a problem of this nature. Comments?
This is what worked for me. I posted this in a similar thread as well.
Hey, I had WiFi connection issues too. I just got a Viewsonic G-Tablet with the Android 3.0 OS and have a D-Link DI-524 wireless router. It could see router and would try to connect, but would cycle and never connect. I could try to connect to other available networks in the area. It connected fine to an unsecure network, and when I tired to connect to secure networks there was a place where I could enter a network key/password. However, I noticed this option was not available on my network when I tried to connect. I reset my router which did not help. I then chose the option to add a network on the tab. This worked!! I was able to enter the key from the add a network option. I then told the "bad" connection to be forgotten. Hope this helps someone else, as I had looked on the internet for awhile for an answer. I was about to buy a new wireless router too!! Oh, I am using WEP too.
edit: ok when I power my tablet back on the same issue was happening. This time I could enter a network and the cycling still contiuned. I even forgot and re-entered the network. The fix this time was to reboot the tab. However, my internet has been acting up lately so IDK.
Hello,
I´ve got problems with the wifi on my folio. I can connect to my Router (D´link- DIR635) but i cant surf in the internet. It loads one site very slow and then its over. Reconnect doesn´t solve this. This probem is with all the roms for folio. What i dont understand is, my neighbour has the D´link - DIR615 and it works???? Any solution for this problem? Thanks
I think that problem is in your router. Try setting up it.
My Router is on default settings and the firewal is deactivated. No portforwarding or anything else.
Did you have that problem with stock rom?
Sent from my Xoom using Tapatalk
yes with stock rom too
Strange...u have other devices that use the same wi-fi network? I have a folio with FolioMod 1.4 installed and yes, it take a long time to obtain a network connection to the router, but not tu surf internet...can u try with another router?
the problem is 100% the router, other routers are no problem. Maybe there are some settings in the configuration of the router to get this thing working. Maybe someone of you knows something about that
I have two routers, identical, Folio doesnt like the SSID on one , but its fine with letters, weird but true !
Try changing the router's channel to 11. Sometimes fixes Folio issues.
bartsled said:
Try changing the router's channel to 11. Sometimes fixes Folio issues.
Click to expand...
Click to collapse
You can try power off your device, after turn off batterry & try again.
my ROM is Jellybam, 5.1
since yesterday i havnt been able to connect to WIFI or to my mobile network.
for example the wifi, it says that it has connected to my router, but i still can't surf the internet.
same thing with the mobile network, it shows on the top of the screen that im on "H+" or "3g" but i still can't access the internet.
I've never had such a problem..what to do?
thanks.
U tried play store?
Sent from my iPhone using Tapatalk
check the access point on your phone to see if is pointing to the apn for your provider. To check access point go to menu - settings - more settings - mobile networks - access point names.
On wifi check your router to see if it sees your phone. The router may need a static ip or the router version is out of date and doesn ot support the wifi of your phone.
Omaxe said:
U tried play store?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
yes.
Cosmic Blue said:
check the access point on your phone to see if is pointing to the apn for your provider. To check access point go to menu - settings - more settings - mobile networks - access point names.
On wifi check your router to see if it sees your phone. The router may need a static ip or the router version is out of date and doesn ot support the wifi of your phone.
Click to expand...
Click to collapse
already done it. my mobile network settings(APN) are fine.
and i even tried to connect to my friend's wifi and still nothing. it connects, but there is no signal and i cant use the internet.
try calling your provider, your account may need to be reset to get rid of the problem with the phone internet.
To check on wifi you may need to try another kernal as there mabe an issue with the wifi files in the kernal.
but how is it possible? i had this ROM for 3 weeks and never had a problem with my internet connection. and i havn't changed my kernel or my modem since i flashed the ROM.
and the internet access and the WIFI problem had started at the same time. so i assumed that there's just 1 problem that causes the wifi and the network problem.
internet and wifi are seperate problems it is a coincident that they both failed at the same time.
Wifi software issues are located in the kernal. Internet issues could also be kernal or firmware related. These issues could strike at any time without warning.
We know it is not a hardware issue as it connects, so it must be a software isuue.
Cosmic Blue said:
internet and wifi are seperate problems it is a coincident that they both failed at the same time.
Wifi software issues are located in the kernal. Internet issues could also be kernal or firmware related. These issues could strike at any time without warning.
We know it is not a hardware issue as it connects, so it must be a software isuue.
Click to expand...
Click to collapse
i've flashed another ROM and the problem is fixed now.
thanks.