Disable HW Overlways - Galaxy S III Q&A, Help & Troubleshooting

Why is it when i select this anytime after i reboot i have to select it again, certain apps like the Eurosport player,etc will not work properly unless this is selected (why is this BTW?) but why do i have to keep ticking it anytime i reboot, is there no way i can just keep this selected?

plus one, would like to know.....i have the same problem.

Doesn't anyone know about this, surely there has to be a way instead of having to select it every time it's bloody annoying

if u change debug.mdpcomp.maxlayer in rom toolbox to 2 instead of 3 problems should be gone. Reboot after changing to 2. I am on the note but this is what we have done for temp fix until devs implement the fix.
Edit. Under build.prop editor
GALAXY Note i717 Paranoid Android Cm10 hybrid Aug20 Nightly

n82k said:
if u change debug.mdpcomp.maxlayer in rom toolbox to 2 instead of 3 problems should be gone. Reboot after changing to 2. I am on the note but this is what we have done for temp fix until devs implement the fix.
Edit. Under build.prop editor
GALAXY Note i717 Paranoid Android Cm10 hybrid Aug20 Nightly
Click to expand...
Click to collapse
Thanks but ive just checked ROM Toolbox and i cannot see
debug.mdpcomp.maxlayer
Click to expand...
Click to collapse
there at all?

Hm... Should be in build.prop editor you should see mdcomp. Logs and mdcomp.maxlayer I'm not sure why it's not there for you guys it is on the note and basically changes that for you permanently. I don't have an s3 on hand anymore I'm sorry wish I could do more to help you guys troubleshoot this
GALAXY Note i717 Paranoid Android Cm10 hybrid Aug20 Nightly

Cheers mate but definitely not there from what i can see.
Anyone else have any ideas?

Are you running one of the jellybean leaks?

Yeah Liquid Smooth ROM although even when i had Android Revolution ROM (before the JB leak) it was the same.

When the rom is working as its meant to you shouldn't need to touch that setting to get things working, I know you do at the moment for the jellybean roms, but it would be very strange for you to need it in any ICS stock rom.

Lennyuk said:
When the rom is working as its meant to you shouldn't need to touch that setting to get things working, I know you do at the moment for the jellybean roms, but it would be very strange for you to need it in any ICS stock rom.
Click to expand...
Click to collapse
i rarely if ever use stock ROM on ICS (or JB) ill mention it on the Liquid Jellybean ROM thread and see if nocast can do something

Related

[ROM][4.0.4][Smooth]|l|l|l|l|l|l| Aberration 1.3 |l|l|l|l|l|l|l| 08/25/12

​ (Click on image above to go to the Aberration website)​
This is a continuation of my previous ShishirROM series of ROMS that started out on Gingerbread 2.3.4, and have evolved and expanded to today, where the latest version of ShishirROM is based off of XWLPG 4.0.3. Aberration is built completely independent of those and the only resemblance to my old ROMs is the dialer, which was an original creation anyways, but at it's heart, it's the next step. The ROM focuses on speed and smoothness and battery life. It incorporates common-sense fixes and ground-breaking features as well as third-party applications that bring something new to the table every time you use them. The ROM was inspired by the old Samsung gingerbread ROMS -- they were stable, fast, and just worked. This ROM manages to bring the same sort of feel back to the table while maintaining an updated look similar to the Galaxy S3 series of phones, and Android's resident Holo design. The Aberration Settings application is an extension of this ROM that lets you change some deeper settings, such as using Lidroid's beautiful 14 Notification Widget Mod instead of the default themed widgets, as well as provide an easier way for users to update to the latest version of Aberration, no matter which model of the Galaxy S2 they're running. This ROM aims to be the ONE ROM that supports every Galaxy S2 phone, and brings them on par with the super-phones coming out later this year. It's an update away from giving your phone four cores, two gigs of RAM, and a 4.8" SAMOLED HD display.
Features:
ODEXED (for smoothness)
Based on XWLPM
Siyah
Aberration Settings app
Lidroid 14 Quick Toggles
AROMA Installer
Google Now
Lux Auto-brightness
Opensource Sensors library (more accurate and faster)
Holo/Jellybean inspired styling
Apex/GS3/GS2 Launcher
GS2/GS3 Music application
Easy-Update
Samsung Dive
Complete development cycle
Directions:
Install i9100 zip in CWM
Wipe Data
Configure installation & install ROM
Reboot
Set-up ROM, download apps, etc.
Reboot again to settle everything
Download Link on the Aberration website. Click on the picture above.
FM Radio if you want it: Here
Wrong section, Should be in Development, not original development. However can you explain the features of this ROM and perhaps a link to the original.
Sent from my GT-I9100 using xda premium
uppon2 said:
Wrong section, Should be in Development, not original development. However can you explain the features of this ROM and perhaps a link to the original.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I built this ROM directly from XXLPM stock, not ported it from another unrelated device, sorry if that was unclear. The Galaxy S2 i777 and Galaxy S2 i9100 are EXTREMELY alike, so alike in fact that about five files hold the changes between them. No actual porting was done.
And I can't provide a link to the original since I made this, and this is the original lol. It's just a Stock Samsung ROM based off of 4.0.4 LPM with a few tweaks and fixes thrown in.
EDIT: Let me try and be more clear: this ROM was built off of XXLPM. It was initially tested on the i777 because that happens to be the device I have, but the development of the ROM was exactly the same for both versions. The i777 and i9100 versions are very different. Different modems, kernels, libs, etc. This ROM truly was built for both devices in mind, therefore it isn't a port.
EDIT2: Moved
shishir95 said:
I built this ROM directly from XXLPM stock, not ported it from another unrelated device, sorry if that was unclear. The Galaxy S2 i777 and Galaxy S2 i9100 are EXTREMELY alike, so alike in fact that about five files hold the changes between them. No actual porting was done.
And I can't provide a link to the original since I made this, and this is the original lol. It's just a Stock Samsung ROM based off of 4.0.4 LPM with a few tweaks and fixes thrown in.
EDIT: Let me try and be more clear: this ROM was built off of XXLPM. It was initially tested on the i777 because that happens to be the device I have, but the development of the ROM was exactly the same for both versions. The i777 and i9100 versions are very different. Different modems, kernels, libs, etc. This ROM truly was built for both devices in mind, therefore it isn't a port.
Click to expand...
Click to collapse
What he means is that what special features or original features does the rom have in order for it to stay in the original development for example paranoidandroid, it has the capability of changing per app dpi, from phone ui to a tablet ui etc. Jkay framework which can customize almost everything from the lockscreen to the notification bar. Because if it is just a cooked rom with some features that has been gotten from other devs, it should belong to android development. But i may be wrong, maybe you have something special in the settings you mention on the OP. Good luck on your rom bdw.
Cheers!
Sent from my GT-I9100 using xda premium
EDIT: Moved
Also, on a somewhat related note, pictures are uploaded to the ROM site.
//FM Radio attached.
Please comment with your experiences with Aberration! It'll help me build a better version for the i9100!
It's fantastic, thanks man.
Sweet looks like it works Removing all beta tags right now.
Can I use touchUX and lkewise aosp mms posted in nexus thread? Can I flash them?
download now and flash later... but where i can see the SS of this ROM guys??
allaboutarif said:
download now and flash later... but where i can see the SS of this ROM guys??
Click to expand...
Click to collapse
Everything's on the website. Click on the picture in the OP.
legola said:
Can I use touchUX and lkewise aosp mms posted in nexus thread? Can I flash them?
Click to expand...
Click to collapse
Depends specifically which zip. Go for it and if it messes up, just flash this ROM again to go back to default
Hello,
I wanted to try your rom, so i downloaded the i9100 zip and followed the installation steps and i got installation completed without any problems.
Then i choosed to reboot. The screen showed the Siyah logo, then the phone gave me a sound... and then nothing. Black screen. I have tried again and again but the same result. Maybe i am doing something wrong.
Thanks
too much bloatware dude.. maybe make a slim version
same issue. after siyah bootanimation a sound and then the screen blanks out.
uppon2 said:
Wrong section, Should be in Development, not original development. However can you explain the features of this ROM and perhaps a link to the original.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
What kind of a rude person are you ? This is no way to post something on a thread
Anybody else facing this issue. Any suggestions for this issue.
For everyone facing the black screen issue, first make sure you're running the i9100 version, and confirm that you wiped data before installing, then try flashing another i9100 kernel before you boot up for the first time. It sounds like the kernel didn't get flashed for some reason. I'll have to do some more digging. If anyone can grab a logcat then i'd appreciate it, although I don't know if the Log service got started after the Siyah screen.
If it still doesn't work, it may not have gotten installed properly. Try going into mounts/storage in CWM and wipe /system, manually do a factory reset/wipe data, and wipe cache as well. That should get everything.
EDIT: If you're getting the sound after boot, that just means the boot animation isn't showing for some reason. Give it five minutes and see if the phone boots up. If so then I'll upload a fix for this when someone confirms that's the issue.
shishir95 said:
EDIT: If you're getting the sound after boot, that just means the boot animation isn't showing for some reason. Give it five minutes and see if the phone boots up. If so then I'll upload a fix for this when someone confirms that's the issue.
Click to expand...
Click to collapse
I left the phone on black screen after sound nearly for 25 minutes, but the phone didn't boot up
bervin said:
too much bloatware dude.. maybe make a slim version
Click to expand...
Click to collapse
I don't quite understand what you mean by bloatware, since I allowed you to pick if you wanted to install most of it, and I allowed you to remove bloatware post-install anyways. Can you list some apps that you'd want an option to remove?
xscreations said:
I left the phone on black screen after sound nearly for 25 minutes, but the phone didn't boot up
Click to expand...
Click to collapse
:/ Try a different kernel. or any of the other solutions I outlined.
shishir95 said:
:/ Try a different kernel. or any of the other solutions I outlined.
Click to expand...
Click to collapse
Sorry none of the solutions worked...

[Q] Unable to mod my stock rom via Gravity Box

I am facing several prolems in my XOLO A500s ROM (MTK 6572)
I have deodexed my stck rom + rooted but i am unable to implement the Gravity BOX fetures
Like: i can't get the data speed monitor mod,nor the clock mod and many more.
But there's custom rom which has this fuctionality to apply all the gravity box mods.
Is there something i need to change in my stock rom.
Please guide me through this.:highfive:
NOTE: I don't want to use the custom ROM because they have some problems in them some of them don't have gps on/off,another have the 1 MP camera insted of 5MP.
Another show internel memory as SD card and SD Card as internel.
The worst ROM problem can't turn on/off wifi (I managed to solve this on my own but still they have some other problems)
Click to expand...
Click to collapse
I want you guys to help me in out so that i can have a better stock rom
prashantvrm said:
I am facing several prolems in my XOLO A500s ROM (MTK 6572)
I have deodexed my stck rom + rooted but i am unable to implement the Gravity BOX fetures
Like: i can't get the data speed monitor mod,nor the clock mod and many more.
But there's custom rom which has this fuctionality to apply all the gravity box mods.
Is there something i need to change in my stock rom.
Please guide me through this.:highfive:
I want you guys to help me in out so that i can have a better stock rom
Click to expand...
Click to collapse
probably your stock rom is not real aosp.it is modded.so that,this problem happened.
droidmahadi said:
probably your stock rom is not real aosp.it is modded.so that,this problem happened.
Click to expand...
Click to collapse
is there any solution for this
could someone help me out
prashantvrm said:
is there any solution for this
Click to expand...
Click to collapse
there is solution but it is better to use custom rom without trying to solve these.You should be edit system ui & framework to solve this
droidmahadi said:
there is solution but it is better to use custom rom without trying to solve these.You should be edit system ui & framework to solve this
Click to expand...
Click to collapse
i dont think its the problem with systemui and framework
prashantvrm said:
i dont think its the problem with systemui and framework
Click to expand...
Click to collapse
i think its the problem with systemui & framework
droidmahadi said:
i think its the problem with systemui & framework
Click to expand...
Click to collapse
could you help me in this
prashantvrm said:
could you help me in this
Click to expand...
Click to collapse
It is simple, nothing will work if the ROM is not close to AOSP.
In order to get GB to work, you will need to ditch your stock ROM and install a custom ROM which are extremely AOSP-based (CM won't get it work too).
If you insist, then you can do only nothing as the dev behind GB already stresses that GB are for AOSP ROMs and he will never ever interested on giving unsupported devices any support
Unless you're so desperate for it
You can learn compiling and decompiling so that you can grab some GB source code and make it work on your stock ROM.
TechnoSparks said:
It is simple, nothing will work if the ROM is not close to AOSP.
In order to get GB to work, you will need to ditch your stock ROM and install a custom ROM which are extremely AOSP-based (CM won't get it work too).
If you insist, then you can do only nothing as the dev behind GB already stresses that GB are for AOSP ROMs and he will never ever interested on giving unsupported devices any support
Unless you're so desperate for it
You can learn compiling and decompiling so that you can grab some GB source code and make it work on your stock ROM.
Click to expand...
Click to collapse
I tried to to replace all the files(/system/app and /system/framework) inside the stock rom with a working custom rom(in which GB was full functioning) but when i replaced th the device was working as it was supposed to work but still GB was not working after this method
prashantvrm said:
I tried to to replace all the files(/system/app and /system/framework) inside the stock rom with a working custom rom(in which GB was full functioning) but when i replaced th the device was working as it was supposed to work but still GB was not working after this method
Click to expand...
Click to collapse
That's not how custom ROM works. And what you have done is seriously wrong
Flashing a completely new ROM is better than the unsafe file overwriting inside /system/xxxxx . Though it might be working in your eyes, however I am pretty sure there are many errors in the logcat since you have mixed up your ROM with unfamiliar files.
Flash a custom ROM that is AOSP or code a new app that does what GB does for your device
Please take note of the above paragraph. That's the choices you have.
I was using GB before. Since I tried CM, and loved it, I have been known that GB won't be supported on CM. What I did was I completely abandon GB. I even have donated to such app. I feel sad, but yea life must go on
TechnoSparks said:
That's not how custom ROM works. And what you have done is seriously wrong
Flashing a completely new ROM is better than the unsafe file overwriting inside /system/xxxxx . Though it might be working in your eyes, however I am pretty sure there are many errors in the logcat since you have mixed up your ROM with unfamiliar files.
Flash a custom ROM that is AOSP or code a new app that does what GB does for your device
Please take note of the above paragraph. That's the choices you have.
I was using GB before. Since I tried CM, and loved it, I have been known that GB won't be supported on CM. What I did was I completely abandon GB. I even have donated to such app. I feel sad, but yea life must go on
Click to expand...
Click to collapse
thanks for your reply
now i am going to get to work with on your suggestion thanks
thanks for your reply
now i am going to get to work on your suggestion thanks

Twizz 4.4.4 base with qmg support

I'm dropping this in here for people to use as a base, I don't intend to support it but will add any fixes that people upload. It's a stock 4.4.4 twizz base with qmg support for note 4 apps. It's stable and everything seems to work but there are issues with the spen as I have only added spen libs and there are no spen options in settings, you can probably just drop n2 settings in but I haven't tried too busy working with the eteam.
Its a port of the s3 lte 4.4.4 official stock from here:
[I9300] [Touchwiz Android 4.4.4]
It works with both agni and devil kernel but devil is included. Please feel free to use it but it would be nice if credit was given as not being a developer I spent a lot of time on it.
I would like to thank @bsbachert and @Bajanman for their help
Download http://www.mediafire.com/download/sb08uib2ek6175m
XDA:DevDB Information
Port I9305NXXUFNI4, ROM for the Samsung Galaxy Note II
Contributors
sawdoctor, Bajanman
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2014-10-07
Last Updated 2014-10-11
Thanks a lot, I downloaded the rom to my pc this afternoon from the very first link and now it's on my sdcard waiting for a test
I saw there should be some issues with spen detach sounds, but inside /system/media/audio/ui I seem to see no pen sounds, so I have just put them there by myself... Just a try before flashing.
I am looking forward to testing the new look and I will report my experience, though I suppose Dn3 4.4.2 will still be my daily rom for a while.
We're working with the eteam to port the n4 stuff, well they're porting it we're just getting it to work on our device. So hopefully we'll get a 4.4.4 base for dn3
I'll hold on to this spot...[emoji13]
sawdoctor said:
I'm dropping this in here for people to use as a base, I don't intend to support it but will add any fixes that people upload. It's a stock 4.4.4 twizz base with qmg support for note 4 apps. It's stable and everything seems to work but there are issues with the spen as I have only added spen libs and there are no spen options in settings, you can probably just drop n2 settings in but I haven't tried too busy working with the eteam.
Its a port of the s3 lte 4.4.4 official stock from here
http://http://forum.xda-developers....ck-rom-4-4-4-gt-i9305n-i9305nxxufni4-t2886807
It works with both agni and devil kernel but devil is included. Please feel free to use it but it would be nice if credit was given as not being a developer I spent a lot of time on it.
I would like to thank @bsbachert and @Bajanman for their help
Download http://www.mediafire.com/download/sb08uib2ek6175m
XDA:DevDB Information
Port I9305NXXUFNI4, ROM for the Samsung Galaxy Note II
Contributors
sawdoctor, Bajanman
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2014-10-07
Last Updated 2014-10-07
Click to expand...
Click to collapse
I had trouble with settings constantly force closing so I couldn't complete setup.
Downloading now
I couldn't get it to boot on Philz or twrp
I got it to boot using the newest TWRP but couldn't get it beyond initial setup. Settings kept force closing on me.
I may try some amateur editing with this but I have far less experience than most anybody.
Thanks for posting this, Saw Doctor!
Sent from my Note 2 SGH-I317
Can you flash this on T-Mobile note 2?
Sent from my GT-N7105 using XDA Premium HD app
When I tried on philz it said to update to the newest binary then rebooted and when i tried to flash it in trwp it said to os was installed
I did the same thing! Did a full wipe, flashed with TWRP and after flash I went to reboot and it said no OS installed. So I just flashed again dirty and it installed and booted fine into set-up! During set up the screen froze and just pulled battery and rebooted to continue setup! After setup I got a few more screen freezes and just pulled battery and it was fine after it settled for a while:thumbup: Seemed very smooth and fast. I had to restore back cause I didnt have much time to test, but will redownload and report back
Great base @sawdoctor! Thanks for your hard work and i hope you and e team come up with somthing sick! Cause DN5v2.2 is frickin awesome and has been my daily driver for a while now and rock solid
Sent from my SGH-T889 using xda app-developers app
Goody68 said:
I did the same thing! Did a full wipe, flashed with TWRP and after flash I went to reboot and it said no OS installed. So I just flashed again dirty and it installed and booted fine into set-up! During set up the screen froze and just pulled battery and rebooted to continue setup! After setup I got a few more screen freezes and just pulled battery and it was fine after it settled for a while[emoji106] Seemed very smooth and fast. I had to restore back cause I didnt have much time to test, but will redownload and report back
Great base @sawdoctor! Thanks for your hard work and i hope you and e team come up with somthing sick! Cause DN5v2.2 is frickin awesome and has been my daily driver for a while now and rock solid
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Thanks, I had no issues with the base I uploaded and neither did @Bajanman. I'll re upload another copy later incase it's a bad upload as I'd fixed all the fc issues. Just having issues with my own phone atm think my pit file is corrupt but then I don't think flashing as many zips as i have is ever going to do the phone any good
sawdoctor said:
Thanks, I had no issues with the base I uploaded and neither did @Bajanman. I'll re upload another copy later incase it's a bad upload as I'd fixed all the fc issues. Just having issues with my own phone atm think my pit file is corrupt but then I don't think flashing as many zips as i have is ever going to do the phone any good
Click to expand...
Click to collapse
Sorry for OT, but is it intended by the team (or a teammember) to share a stable n7100 base also? Thx :fingers-crossed:
(Must admit, that my own efforts were not successful enough :crying
Androidwizzard said:
Sorry for OT, but is it intended by the team (or a teammember) to share a stable n7100 base also? Thx :fingers-crossed:
(Must admit, that my own efforts were not successful enough :crying
Click to expand...
Click to collapse
I can only tell you what I know, the eteam are concentrating thier efforts on updating dn3 to a 4.4.4 base and porting n4 features. It's not really my place to say what they have working and what they don't but I believe they have a stable base. I know what we have working on the n7105 and it is promising but there are a lot of bugs to iron out. The base I dropped I was using as a daily driver it's that stable
Just to share my experience:
- N7105, 4.1.2 booloader;
- all wipes but internal sd;
- with TWRP 2.6.31 (the one modified for 4.4.4) I got "no OS installed" so as other users have already reported;
- with the latest cwm, I was able to flash and get the rom booted, but I could not go beyond settings.
I have had neither the time to try any solution, nor to use adb for a log, because my backup to the extsd was corrupted and I was compelled to using odin with a rather damaged usb cable and it was very late (so I am now back to 4.1.2 and tbh battery life was really good) but I think that the issues could be related to the old bootloader, as I could see a very short lasting popup message referring to wifisettings.
Anyway, the rom boots even with the first shift kernel.
I will try again tonight and post a log, if adb and the usb cable are my friends
I will also try a dirty flash over 4.1.2, just to see what happens.
I have had the same results but dirty flashed a second time to get the rom to boot (but again, couldn't get beyond initial setup with settings force closes after a quick flash of wifi settings). I am on the AT&T NE5 4.4.2 bootloader for the SGH-I317 so I don't think it is exactly bootloader related.
Dirty flashing on top of a 4.1.2 build works flawlessly. Everything seems to work pretty nice, since I could skip settings, but the spen works only as a pointer and with the keyboard, while I cannot activate neither air command, nor use the pen to air scroll.
And in settings it is shown as 4.4.2, instead of 4.4.4, but it must be a typo.
I changed the SecSettings.apk and SecSettingsProvider.apk and got it to setup. But when trying to access settings after it setup would FC. Didnt really test it out because of that..
Here's a few screenshots..
Double0EK said:
I changed the SecSettings.apk and SecSettingsProvider.apk and got it to setup. But when trying to access settings after it setup would FC. Didnt really test it out because of that..
Here's a few screenshots..
https://mega.co.nz/#!09kHwCAC!wGLsrWU1mfD3UqwWHsKEimGYU8Uy-KFt6bMOsPFVUb4
Click to expand...
Click to collapse
Thanks for your effort. I downloaded, but it must have been corrupted download because now i can't even start installation.
Just wait till ops drop his fixed version.
Sent from my GT-N7105 using Tapatalk
rob_z11 said:
Thanks for your effort. I downloaded, but it must have been corrupted download because now i can't even start installation.
Just wait till ops drop his fixed version.
Sent from my GT-N7105 using Tapatalk
Click to expand...
Click to collapse
You might need to update your recovery or reboot back into recovery after a wipe.
I used TWRP 2.8.0.1 and had no issues. Also, im using Tmo T889 with 4.1.2 Bootloader.

[Q&A] [Audio Mod] eXtremeBeats™ Any Device

Q&A for [Audio Mod] eXtremeBeats™ Any Device
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
This mod work very well but i have little problem with version 2.0. I have lg l9 ii with stock 4.1.2 jb on it, version 1.0 work with viper4android and it sound great but when i installed version 2.0 on clean rom (ofc still 4.1.2 jb) system run good without any issues or fcs but after installing viper i cant run it...! I dont know why but viper cant just run, it is in app drawer but when i click it make screen black for 3 sec and come back to app drawer wiothout any screens or something, he should ask about su permissions and install drivers but this not happen. Ofc super su and busy box are installed and work good, dont know why it happen, i tried install viper later extreme and first extreme later viper in both ways still same problem. I come back to 1.0 because viper for me is a must, maybe you people know how to fix it. Installing viper as system app dont change anything, i tried to add viper drivers on my own by copying its file from old system to lib folder and adding necessary lines in audio_effect.conf but app still cant run
I have installed ver 1.0 on my sgs 3. I am running CM 11 on KitKat 4.4.4 . I use Nova Launcher. I do not see the icon to run the EBS program. I looked in the appp drawer for it with no luck. I do see the build prop entries in my buildprop. Poweramp loads and runs fine. Can any one assist me? BTW, I did try to install ver 2 and ver 2 update. Separately of course. The fc behavior reported by others happened to me. I restored backup then installed version 1. Please advise how to locate the icon to use this program. TIA. Gary
IaKnightHawke said:
I have installed ver 1.0 on my sgs 3. I am running CM 11 on KitKat 4.4.4 . I use Nova Launcher. I do not see the icon to run the EBS program. I looked in the appp drawer for it with no luck. I do see the build prop entries in my buildprop. Poweramp loads and runs fine. Can any one assist me? BTW, I did try to install ver 2 and ver 2 update. Separately of course. The fc behavior reported by others happened to me. I restored backup then installed version 1. Please advise how to locate the icon to use this program. TIA. Gary
Click to expand...
Click to collapse
Their is no app to say anything is open. Just trust the buildprop lines.
---------- Post added at 10:59 AM ---------- Previous post was at 10:58 AM ----------
masterganja said:
This mod work very well but i have little problem with version 2.0. I have lg l9 ii with stock 4.1.2 jb on it, version 1.0 work with viper4android and it sound great but when i installed version 2.0 on clean rom (ofc still 4.1.2 jb) system run good without any issues or fcs but after installing viper i cant run it...! I dont know why but viper cant just run, it is in app drawer but when i click it make screen black for 3 sec and come back to app drawer wiothout any screens or something, he should ask about su permissions and install drivers but this not happen. Ofc super su and busy box are installed and work good, dont know why it happen, i tried install viper later extreme and first extreme later viper in both ways still same problem. I come back to 1.0 because viper for me is a must, maybe you people know how to fix it. Installing viper as system app dont change anything, i tried to add viper drivers on my own by copying its file from old system to lib folder and adding necessary lines in audio_effect.conf but app still cant run
Click to expand...
Click to collapse
Sorry, looks like it is incompatible. Keep using 1.0.
Thanks
OK Thanks for the response.
Does it work on miui?
Sent from my HM 1SW
bobinx said:
Does it work on miui?
Sent from my HM 1SW
Click to expand...
Click to collapse
Providing it's Android 4 or up, sure.
Opss, until now I found problem with my phone: even I install busybody 15 or 18, then flash this mod (v2), then I found nothing add into my system/app and system/framework, ... only string was add into my build.prop. I don't know why, but before I installed successful this mod, with full file in this zip into my system, now didn't, even I mount system in recovery before flash zip. My phone is rooted, of course. Anyone like that?
hey guys,
I've installed this mod and I have a question.
Is there any app where I can configurate settings like in viper4android? Or is this mod made of various libs and Service's running in the background without a primary app?
Sony Xperia Z Ultra 4.4.4 Stock not compatible
Flashinh this to my leads my Sony Xperia Z Ultra 4.4.4 Stock to infinite reboots. Device reboots after several seconds of booting into system
Please help me sir,
Im new to this thread. I have galaxy note 2 n7100 and i have installed ditto note 4 rom and having viper4android installed. When i flashed ExtremeBeats audio mod through recovery the phone gets started and when i try to unlock my phone by swiping on lockscreen phone get stuck and then i have to format my phone. Please help me in this situation.
taus3q said:
Please help me sir,
Im new to this thread. I have galaxy note 2 n7100 and i have installed ditto note 4 rom and having viper4android installed. When i flashed ExtremeBeats audio mod through recovery the phone gets started and when i try to unlock my phone by swiping on lockscreen phone get stuck and then i have to format my phone. Please help me in this situation.
Click to expand...
Click to collapse
More specific please... EB version? do you have custom kernel installed or just stock kernel from rom? do you mount /system before flashing EB? The best way to install EB is after flashing the new rom. You need to mount /system then flashing EB. Reboot. After that install v4a and its drivers. Reboot again. If you follow that method and found it's not working try another version of EB. If the problem still persists, seems like it come from your rom side not supporting it.
Hi!
This beats-mod seems very promissing.
I wonder if it will work on my brand new I9301 S3 Neo ???
Because I also need to root it and wonder if it worth?
Please let me know, I love hi-fi music.
Cheers!
Sent from my GT-I9301I using XDA Free mobile app
How much time it take for installing the library?
My rom already as the viper4android... Liquidsmooth 5.0.1 LG G3 how dö i install the mod? Pl help me
iGordy said:
My rom already as the viper4android... Liquidsmooth 5.0.1 LG G3 how dö i install the mod? Pl help me
Click to expand...
Click to collapse
Just flash this in your recovery, and you are done.
Download link
Pls tell where is the download link of zip file
i flashed version 2.1 on my evo 4g lte with TWRP recovery and it flashed fine, but when i rebooted and played music, it stayed the same. Was an app supposed to be installed or something? I have Viper4android installed already, but extremebeats doesnt show up anywhere...are there more steps besides flashing with recovery?
Stock Rom?
I'm new in this kind of topics. Does it work with a Stock Rom?
This mod doesn't work on my HTC One M8. Android 4.4.4 3.28.xxx.x Rooted Stock, S-on. Tried it a bunch of times with different practices, it just soft bricks the phone every time.
OP, what can you say about this? It says in your page that my device is supported but it doesn't work. Or maybe it's just me, what should I do if it is? Help please, I'm really eager to have this mod.

(ROM) BOF3 Thunderbolt V 2.9 N-915-G stock,deodexed 19JUL

THUNDERBOLT V2.9
DOWNLOAD: http://forum.xda-developers.com/showpost.php?p=61852408&postcount=190
THUNDERBOLT V2.7 BOE1
Deodexed
busybox
zipalligned
fix ext sd
init.d
kernel with init.d
STOCK EXPERIENCE
3minit battery flash separately( install before setting up xposed wanam or it will not work)
DOWNLOAD
http://forum.xda-developers.com/showpost.php?p=61485120&postcount=156
OLDER LINKS
apps:
titanium
esfile explorer
lazy swipe
n4 hidden features
toolbox
universal init.d
wiziconizer
power menu
removed some samsung apps (you will notice blank icons in edge menu)
FLASHING:LOLLIPOP
must be on stock BOE1 rooted with twrp or cwm
flash as normal
***do not wipe data or anything else
First boot takes a while.
AFTER FIRST BOOT
freeze or delete
sknox 1.0
sknox II 1.0
& anything else you need
DOWNLOAD
v2.3 13APR
https://www.androidfilehost.com/?fid=95916177934554247
$$ network speed indicator & 3minit (flashable) thanks: myself (long due lol)
REMOVED: sfinder & qconnect BAR
https://www.androidfilehost.com/?fid=95916177934555731
https://www.androidfilehost.com/?fid=95916177934554633
5Way Reboot: https://www.androidfilehost.com/?fid=95916177934554683
older
https://www.androidfilehost.com/?w=files&flid=26847
CHECK POST 2 FOR TW LAUNCHER BY CLCK
thanks:
archi awesome kitchen
kmokhtar79
micky387 3minit mod
arpanbag1996
Beetle84 (TESTING)
TW Launcher by CLCK
http://forum.xda-developers.com/note-edge/themes-apps/edge-5x5-launcher-lollipop-n915g-rom-t3065401
15 toggles ( OPTIONAL)
for this mod you need sqlite editor app installed.
open:-- data/data/com.android.provider.settings/databases/settings.db/system/
in the list go to number 268 & 269 and change the value from 10 to 15 press save and exit.
remove brightness slider
open:-- data/data/com.android.provider.settings/databases/settings.db/system/
go to 265 notification_panel_brightness_adjustment and change value to 0
NITRO X SPARK (this is not my work sharing)
PERFORMANCE TWEAK not integrated in the rom
please read the forum before proceeding.
http://forum.xda-developers.com/and...mod-projct-mod-boost-nitro-x-edition-t2809443
DOWNGRADE to KITKAT
EASIEST WAY TO REVERT TO KK
: Enable USB debugging reboot into recovery (in lollipop)
: WIPE:-- SYSTEM, DATA, CACHE, INTERNAL SD, DALVIK (dont reboot)
: battery out 3 button reboot into DOWNLOAD MODE (safe bet)
: odin 3.09 and install the kk tar file
and you'll be back at kitkat
So, just checking as you didn't say, is this Kitkat or the new Lollipop rom?
If anyone has gone to Lollipop there's a chance, if the bootloader was flashed,that they can't go back to 4.4.4 kitkat. It'll just result in bootloops until they reflash Lollipop...
ultramag69 said:
So, just checking as you didn't say, is this Kitkat or the new Lollipop rom?
If anyone has gone to Lollipop there's a chance, if the bootloader was flashed,that they can't go back to 4.4.4 kitkat. It'll just result in bootloops until they reflash Lollipop...
Click to expand...
Click to collapse
Good find
Wow ! Finally somone has begun providing a Custom debloated ROM for 915G.
Can the OP give a list of what has been done to the original ROM i.e. softwares removed, tweaks etc... I am use to REVOLUTION style custom roms, smooth, fast, stable and tweaked for performance without being unstable. Thanks for providing this rom.
Looking forward to the develpments here.
Well done.
globalgpj said:
Wow ! Finally somone has begun providing a Custom debloated ROM for 915G.
Can the OP give a list of what has been done to the original ROM i.e. softwares removed, tweaks etc... I am use to REVOLUTION style custom roms, smooth, fast, stable and tweaked for performance without being unstable. Thanks for providing this rom.
Looking forward to the develpments here.
Well done.
Click to expand...
Click to collapse
this was a test build which happen to work very smooth so i decided to share it, didnt keep any record of what i removed
next build will be a bit more professional.
panjaby said:
this was a test build which happen to work very smooth so i decided to share it, didnt keep any record of what i removed
next build will be a bit more professional.
Click to expand...
Click to collapse
No worries mate, Thanks for this... :good:
Excellent the first G rom!
Thx for the effort mate.
panjaby said:
this was a test build which happen to work very smooth so i decided to share it, didnt keep any record of what i removed
next build will be a bit more professional.
Click to expand...
Click to collapse
Yes, fully understand. I guess you will start giving them version numbers as you develop your custom Lollipop ROM.
It takes time to add tweaks and test them out. But in the end, it should just get better.
I pop over to the Note 4 thread every now and then and see what tweaks they are coming up with, as there are a lot more Note 4 users than Note 4 Edge users.
I will defintely be keeping and eye out here and will install your next ROM and give it a go.
Keep up the great work.
No one else is really doing anything for 915G, so you're the Man !
globalgpj said:
Yes, fully understand. I guess you will start giving them version numbers as you develop your custom Lollipop ROM.
It takes time to add tweaks and test them out. But in the end, it should just get better.
I pop over to the Note 4 thread every now and then and see what tweaks they are coming up with, as there are a lot more Note 4 users than Note 4 Edge users.
I will defintely be keeping and eye out here and will install your next ROM and give it a go.
Keep up the great work.
No one else is really doing anything for 915G, so you're the Man !
Click to expand...
Click to collapse
yeah i was getting sick of no development of G and a laggy phone, guess it was an incentive to put some effort in.
at least now we are open to some of the tweaks available on xda. i'm not a dev but i will try my best.
by the way anyone getting f.c with stock front facing camera.
panjaby said:
by the way anyone getting f.c with stock front facing camera.
Click to expand...
Click to collapse
No FC here.
If you need a hand testing or whatever send me a message, glad to see something for the 'g' around here. I used the zip you linked to earlier @panjaby and my phone is snappier now.
And yes, im getting fc on front camera, ive cleared the camera apps data and reset but still no good. I did dirty flash over stock lollipop so that may be the issue.
panjaby said:
yeah i was getting sick of no development of G and a laggy phone, guess it was an incentive to put some effort in.
at least now we are open to some of the tweaks available on xda. i'm not a dev but i will try my best.
by the way anyone getting f.c with stock front facing camera.
Click to expand...
Click to collapse
Yep, was gonna mention it if no-one else did... I did a clean install, wonder if those with no problems did a dirty flash?
Gotta scroll through all the repliesas theat was answered but just got home from work and gotta be back there in less than 8 hours...
Also found the 3 minit battery mod by micky387 doesn't work in this rom but does in stock lollipop rom...
ultramag69 said:
Also found the 3 minit battery mod by micky387 doesn't work in this rom but does in stock lollipop rom...
Click to expand...
Click to collapse
Working fine here, i installed the zip micky387 posted in the lollipop leak thread
Beetle84 said:
Working fine here, i installed the zip micky387 posted in the lollipop leak thread
Click to expand...
Click to collapse
Yep, I went back and tried again. Found I'd installed the KK mod instead.
I seriously need some sleep. What a stupid thing to do..
Fantastico and many kudos. Thankyou for very for finally getting one going, I'm going to be watching this thread very carefully
panjaby said:
yeah i was getting sick of no development of G and a laggy phone, guess it was an incentive to put some effort in.
at least now we are open to some of the tweaks available on xda. i'm not a dev but i will try my best.
by the way anyone getting f.c with stock front facing camera.
Click to expand...
Click to collapse
yes got fc with front cam so reverted back to stock rooted...flashed it with cwm and right not i flashed twrp 2.8.1.1... not able to find the recovery u mentioned..if u could give me the link of twrp ur rom works with i shall install it again n see !!
dhingra_vinay_in said:
yes got fc with front cam so reverted back to stock rooted...flashed it with cwm and right not i flashed twrp 2.8.1.1... not able to find the recovery u mentioned..if u could give me the link of twrp ur rom works with i shall install it again n see !!
Click to expand...
Click to collapse
http://teamw.in/project/twrp2/266
There you go mate i am using 2.8.4

Categories

Resources