Related
it wont let me post this in the dev forum and i did a seperate thread to the tips one to get my specific question looked at.
firstly, i believe due to it being a vodafone device, i dont get the update offered in kies which i believe is up to ke7, mine is ke1 and i cant see vodafone getting their fingers out very quickly to authorise the update. if i root it, should this then offer the update or is it only likely if i also completely unbranded it?
i dont want to flash any custom roms or anything so if the update still doesnt get offered after rooting, what other benefits would i see from rooting? what programs, inc vodafones own, could i remove?
if i do root it, i should download the unsecure .tar xwkdd even though i am currently on ke1? will i need to re-root again if/when there was any further updates such as ke8/9 etc etc?
also download odin and superoneclick and follow the guide.
to get rid of the yellow exclamation i the follow the same initiall process but use ke1 as i would have been on this if i still hadn't managed to update with kies or ke7 if i had managed to update? if i had to root first to GET that ke7 update would i root, update firmware through kies THEN reflash with ke7? OR root, reflash with ke1 THEN update? as you can see from this last paragraph, having vodafone branded phone makes it more confusing for such a newbie as i dont know what to do with that update.
please be gentle guys as i want to get the best from this phone but dont want to brick my phone and being a newbie i am very worried about getting it wrong
If you have to ask you shouldnt be doing it, but if you insist then follow the guide step by step and you cant go wrong. And if you do go wrong, insert your jig and flash away.
Also a post like this shouldnt go in the dev forum as it would get locked/deleted so you got the post in the right section.
Sent from my GT-I9100 using XDA Premium App
thx mate.
surely everyone here had to start somewhere and that would have meant learning how to do it, possibly by asking questions.
as of following the guide, sorry but my question points out that i simply wanted a little extra reassurance about what rooting can help with but also what way round i would approach the update of the firmware and the rooting. i have already looked at the guide and it doesn't really have the finer points of the update built into the guide so thats why i posted.
One updates are released by Vodafone the latest is KE1 you wait for them to update .
Rooting is nothing to do with update and will void warranty .
You need to follow the instructions if you want to root
Long Guide for beginners .
Root phone then install Ke1 Kernel from post 2 ..
If you want total debrand use the debrand guide but you lose Voda update path .
jje
JJEgan said:
Long Guide for beginners .
Click to expand...
Click to collapse
Long guide (for beginners)
- Download the attached ODIN file and extract the .zip file
- Download the attached XWKDD, but do NOT extract the .tar file
- Download and extract SuperOneClick (Some say you should not be using the very latest version 1.9, but 1.5 or so)
- If you do not have Samsung's KIES 2.0 installed, download and install it. You need it to install the correct USB drivers, so the programs can communicate with the device. Reboot your computer after installation of KIES.
- Make sure your device is in USB debugging mode: Settings -> Applications -> Development -> USB debugging
- Reboot your device into download mode: Turn the device off, then power it on again by pressing and holding VolumeDown + Home + Power simultaneously. You will know when you are in download mode, it is really obvious
- Start ODIN
- Connect the device to your computer using USB
- Wait a few seconds, the ODIN screen should show you that a device is now connected
- Make sure that in ODIN NOTHING is checked, except the "Auto reboot" and "F. Reset Time" checkboxes. Press the "PDA" button, and select the "XWKDD_insecure.tar" file.
- Press "Start". ODIN you should now be flashing the kernel, and the device should reboot.
- Wait until the device is rebooted, and while still being connected over USB, start SuperOneClick, and press ROOT.
- Reboot the device
- Done !
http://forum.xda-developers.com/showthread.php?t=1056334
Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
CurtisAndroid5 said:
Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
Click to expand...
Click to collapse
No need to worry about it.
Uninstall the drivers associated with the phone. Are you using Windows?
For XP: Go to start > Control Panel > System > Click on the Hardware tab and then Device Manager. Find the driver for the phone. I remember it has a yellow icon, and the drivers name is a mix of capital letters
It's probably similar for Windows 7, but i wouldn't know.
Uninstall the driver associated with the phone, then reinstall by plugging your phone into the computer in download mode. It would help to uninstall and reinstall Odin as well, just in case.
If you get Odin to work, just work away like you would.
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
CurtisAndroid5 said:
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
Click to expand...
Click to collapse
I think it'll fail again if your phone isn't rooted. You can't get rid of the Computer-Caution-Phone image without succesfully using Odin.
You could try to flash the .tar and .ops file again. I can't see it working though unfortunately.
Any ideas then? Is there a way to root my phone via Odin or anything?
CurtisAndroid5 said:
Any ideas then? Is there a way to root my phone via Odin or anything?
Click to expand...
Click to collapse
I've never heard of rooting your phone through the download mode or through Odin.
Maybe there's a file you can put on your phone through Odin which doesn't require root? I'll take a look around for you.
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
CurtisAndroid5 said:
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
Click to expand...
Click to collapse
Just thinking that Odin is a program which requires root so there won't be any file you can transfer when unrooted. I had a quick glance over at the Odin thread, and the first step is that you have to root your phone.
I'm sorry, but there's nothing else I can think of which might help. Maybe if somebody with a bit more knowledge/expeerience sees this thread, they might help.
Can Odin detect your phone?
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
I don't know of any others, but Superoneclick works fine for the Galaxy 5. Like I said, I've never heard of using it during download mode so just be careful with that.
If Odin detects your phone, have you tried just closing Odin and plugging out the USB safely?
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
CurtisAndroid5 said:
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
Click to expand...
Click to collapse
It's a bad idea because it just won't work. Odin will crash again.
I don't know what to do I'm afraid.
Looks like my phone is shagged due to my own stupidity, I forgot to root it because my phone was previously rooted and it went back for repairs, then I completely forgot i didnt install Root access -.-
Do you think i can recover my phone or is it well and truly gone?
Well it's not like your phone is bricked or anything. It's just broken a connection to Odin and it won't boot until it's completed.
You could always return it for repairs again. Your warranty might be broken though.
If I happen to come across a DIY fix then I'll post it here.
Thanks for your help mate, i've decided to just send my phone back for repairs, buy a new phone (Probably a Blackberry for BBM and stuff with all my mates), and sell my phone once i get it back.I have gave up on Samsung mobiles.
Thank you.
Did you send your phone alredy? Uncompress the firmware.tar file and unselect "one package in Odin" . On the boot in odin select the boot file of the .tar and run odin. Maybe that will help
Sent from my Galaxy5 using XDA App
Dude have u tryd using samsung kies it might detect it n let u do an emergancy firmware recovery or maybe (a verry unlikely maybe but still a maybe) it will detect the problem and provide u a solution hope this helps.
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
Hi, had the very same issue as you. Odin crashed just few sec after start. What I did ; uninstalled everything (Odin & files comes with it, KIES). Then restart PC, go to Samsung.com and download latest KIES, when downloaded go to Tools and check for updates. Accept/run them, when done restart PC. Now, read the steps bellow, and see the attached picture.
1. Extract Odin v4.28 and Ops File.zip I5500XXXX.rar
2. Open Odin v4.28,
- Select OPS tab: EUROPA_v1.0.ops
- Make sure Auto Reboot & Protect OPS selected in Option tab
- get this I5500XFJPQ from samfirware.com ( for some strange reason only this package worked!), download, and unzipp to folder called GT-I5500. In to this folder place Odin and ops as well.
- Make sure One Package selected in Option tab
3. Turn off phone, remove battery for 5second, put it back
4. Hold "Volume Down, Center button & Power button" in the same time to enter Download Mode (yellow triangle)
5. Connect to PC with USB cable
6. When the data line and the phone connection is successful, com port shows yellow in Odin
7. Press Start on Odin
8. Waitin & Pray!
9. PASS, its done!
*Hard reset after flashing *2767*3855#
*Check ur Phone Info *#*#1234#*#*
Note: my i5500 was rooted, so if was yours then ok. When pressing buttons you must see an yellow triangle! If you don't see it don't try connect. Remove battery for 3-5 minutes and try again...
Thanks for the replies, I've got my 'broken' phone in its box on my wardrobe, Carphone Warehouse have ordered me a brand new G5 to replace mine, I should get that sometime next week, but I'm buying a HTC Wildfire S pretty soon anyway!
Thanks for your help, I'd rather keep my broken phone well, broke aha.
Have you tried flashing twrp recovery then using cf-autoroot?
Hi everyone,
I brought a new galaxy s2 phone about 4 weeks ago and it has spent most of that time soft bricked since I tried to update it to the newest firmware, K14....
I am using windows 7 starter, 32bit. I have installed kies, uninstalled and re-installed kies, tried uninstalling kies and just using the drivers.
Recently I did a clean install of windows, installed kies, as more drivers seem to be recognized and downloaded odin v1.85. I restart the computer, start task manager end all processes that say kies, run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start and the process only goes as far as boot.bin.
I have tried all of my usb ports and the only difference is the number of the modem installed driver and how far along odin gets. With two ports it only goes as far as setup connection which was as far as anything went before I re-installed windows. I have replaced the usb cable and made sure the phone battery is fully charged. The phone was put into usb debugging mode before it was bricked. I have attached a picture of what drivers get installed when I plug in the phone. The firmware I am attempting to flash is the uk 3 version off the firmware page of this website.
Please can somebody give me the solution it is driving me nuts!
Sorry for waffling but I figure you need to know what I've tried so that I don't waste anybodies time.
Thanks guys
Did you try a different stock rom? Did you try a different pc? Or if you want to, flash a CF-root kernel. Then boot in recovery and flash a rom of your choice.
The flashcounter will start and stock roms can't be flashed this way (at least as far as I know).
Is your phone a I9100 model?
I ask this to make sure you are trying to flash the correct firmware for your device.
Sent from my GT-I9100 using XDA App
Cookoospite said:
Hi everyone,
I brought a new galaxy s2 phone about 4 weeks ago and it has spent most of that time soft bricked since I tried to update it to the newest firmware, K14....
I am using windows 7 starter, 32bit. I have installed kies, uninstalled and re-installed kies, tried uninstalling kies and just using the drivers.
Recently I did a clean install of windows, installed kies, as more drivers seem to be recognized and downloaded odin v1.85. I restart the computer, start task manager end all processes that say kies, run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start and the process only goes as far as boot.bin.
Possibility one bad firmware file or wrong file ,
Or not using Samsung USB cable .
jje
Click to expand...
Click to collapse
Hi Lenny,
Yh, i have tried it on my desktop which runs 7 home premium. Clean install with same results. Tried the K14 firmware a few times but that never got any further than setup connection. Don't understand the rest of your post sorry. Can you do a flash for dummies thing? And is there a firmware you would recommend trying?
@ aceofclubs -the box says i9100 and so does the sticker in the back.
@ JJEgan - the first cable I used was the one in the box and while the one I have replaced by ebay, they had good feedback. The K14 firmware was given to be by a user of the galaxy s2 that he had successfully flashed with.
Does the phone look to have installed correctly, the guy who gave me the firmware said he had abd appear in device manager, which I haven't got. Also after the phone is finished installing drivers if I click in the system tray, the green icon that shows devices that are present is not there and neither is the phone but if I go into device manager samsung composite device is.
Cookoospite said:
Hi Lenny,
The K14 firmware was given to be by a user of the galaxy s2 that he had successfully flashed with.
Does the phone look to have installed correctly, the guy who gave me the firmware said he had abd appear in device manager,
Better of following the instructions than second hand stuff .
Download firmware from stock rom thread no excuses of bad firmware then .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Cookoospite said:
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Click to expand...
Click to collapse
No you dont need a ADB neccesarily for flashing. ADB (Android Debug Bridge) is a tool that comes with the Android SDK that allows you to control and interface with your Android device. Well do u have the phone specifications before bricking it, like Model No, Built, CSC, Kernal Etc.
First try to uninstall Kies and Install the latest version, so that you have the latest drivers.
Check the Intratech thread on Stock ROM ( http://forum.xda-developers.com/showthread.php?t=1075278) and download the correct rom.( I presume you have I9100 Intenational Version of S2). Open Odin 1.85, do not change any options, brownse and put the stock rom u downloaded into the PDA section and click on start button, you should be good.PM me if you have any issues.
The above didn't work. Here's what I got:
Cookoospite said:
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Click to expand...
Click to collapse
AS you have the yellow box in Odin you have the drivers all the firmware in that link works .
run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start
Lets do this the right way just to be sure . Open Odin put the tar file in PDA
go to download mode at first screen download mode on phone follow instruction ( vol up from memory ) after next screen connect Samsung USB cable to phone and PC .
jje
Thanks, think I've done that anyway but, just to check, what do you mean by next screen?
The screen when you are in download mode and press volume up.
Yh that is what I'm doing, thanks tho. Can someone please give me a reliable link to an older version of Odin to try? At the mo I am using v1.85, this the latest version?
Sent from my GT-I9100 using XDA App
Odin 1.3 here
Cookoospite said:
Yh that is what I'm doing, thanks tho. Can someone please give me a reliable link to an older version of Odin to try? At the mo I am using v1.85, this the latest version?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
So close! I plugged the phone in and got as far as cache with the green progress bar showing just the tiniest bit. Left it for over an hour but the bar didn't move at all! Encouraged I restarted the computer to try again only to find that now the computer and odin won't recognize the phone until I uninstall and reinstall kies and always hangs on cache. I restarted in the first place as the phone never shows in the system tray. Sorry to be a bore but have you any idea why everyone else can plug in and flash and my machines refuse to! I welcome any ideas you have. Thank you.
Instead of Odin, you could try Heimdall. Maybe that will work for you.
http://forum.xda-developers.com/showthread.php?t=1104826
Thanks Lenny. Don't know how to use it tho no boxes like on the tutorials I have watched in the latest version. Can you clue me in please?
Sent from my GT-I9100 using XDA App
Here is a guide, it should work the same for our phone.
http://forum.xda-developers.com/showthread.php?t=878686
Thanks. Have to wait a couple of days to try it now. Happy Christmas
Sent from my GT-I9100 using XDA App
hey hope everyone had a good christmas and new year. Still no joy, where do I get PIT files to flash with the newest version of heimdall to go with our firmware? The newest version won't let me add files until I enter a PIT. I tried version 1.1 but I couldn't get it to recognise a compatible device.
On the odin front: I thought I'd cracked it. It started flashing, took hours but I had half a green progress bar and then it just seem to freeze. Also this seems replicable a few times and then I get stuck at setup connection again. I then have to do a system restore to get it to flash to the furthest point again. Does this give anyone any clues? Or does anyone know of any heimdell packages I could try? And the long shot, any way of getting firmware on to an sd card and flashing that way when a phone is soft bricked?
Sorry if I'm annoying you but there has to a way round this. I brought a rooted one to use while this is sorted, love the phone but need to know I can update and be able to sort it out if things go wrong.
Thanks again for your help and suggestions.
Hi everyone.
i own a international samsung s3 gt-i9300T
i noticed it behaving strangly as apps where locking up and then it would restart in the middle of web surfing etc
last night i restarted it and now it has frozen in ODIN MODE and states DOWNLOADING-DO NOT TURN OFF TARGET...
Its been on this page for hrs..
i have a custom Hyperlight rom installed.
Any suggestions would be greatly appreciated.
thankyou.
john
Press and hold the power button to restart it. Does it still reboot into the Download mode?
If yes, then try and install a stock ROM.
Sent from my GT-I9300 using xda app-developers app
it's already in download. read the instructions on installing a stock rom
Oomahey said:
Press and hold the power button to restart it. Does it still reboot into the Download mode?
If yes, then try and install a stock ROM.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
hi
srry fr the late reply but it freezes on the samsung galaxy s 3 gt i9300t screenafter it reboots
im totally lost im about to dump the phone in the garbage and get another one tomorro
ive also tried using odin again but it just stalls for hrs when trying to reinstal flash another rom
thnx heaps for ur advise
Glebun said:
it's already in download. read the instructions on installing a stock rom
Click to expand...
Click to collapse
thnks buddy but when i hold the power button it does what i explained in the above reply when i hold power vol down and home the warning screen comes up informing me that a custom rom can cause critical problems etc so when i press down to cancel it goes back to the previously mentioned screen but when i press up to install rom it goes into odin mode with the android robot with
product name blank (previosly it stated gt i9300t)
custom binary download no (previously stated4)
current binary samsung official (said something different before)
system settings custom
i swear this is doing my head in :0
Basics as its very difficult to understand your posts .
Download mode first screen vol up .
Open Odin
Load firmware file as PDA
Connect USB cable
First box in Odin should show yellow then hit start .
Note at what point fails .
JJEgan said:
Basics as its very difficult to understand your posts .
Download mode first screen vol up .
Open Odin
Load firmware file as PDA
Connect USB cable
First box in Odin should show yellow then hit start .
Note at what point fails .
Click to expand...
Click to collapse
hi im using the latest odin file odin3 v1.85 and is this the right firmware file to use as i used this to root my s3 CF Root-SGS3-v6.4.tar
when i do it it says
<ID:0/005> "cant open the serial (com) port.
<OSM> All threads completed (succeeded 0/ failed 1)
if the product name is empty in download, then it's time to get a new phone. it's SDS
Glebun said:
if the product name is empty in download, then it's time to get a new phone. it's SDS
Click to expand...
Click to collapse
thanks matey
so in other words my phone is bricked :0
by the way what does sds stand for ???
anyway thnx again
Glebun said:
if the product name is empty in download, then it's time to get a new phone. it's SDS
Click to expand...
Click to collapse
hi again
i tried it again and now it says there is no pit partition ???
who wants a samsung s3 brick b4 it goes into the trash ???
antway thnx buddy this rooting is not fr me :0
Put it on ebay just say what the problem is .
Someone who reads your post will come to the conclusion its just a user who has not followed the instructions annd may think its worth a cheap buy .
Odin is not firmware CF Root is not firmware .
jje
Make sure that uve downloaded the correct CF-Root file (for i9300T and NOT i9300)... I think its nothing to do with SDS... Anyway try the following link and download the package again...
http://www.androidegis.com/how-to/how-to-root-galaxy-s3-i9300t-with-cf-root-tool/
Hope it works....
Sent from my GT-I9300 (Hassan Khalid Malik) using xda premium
A friend send me a Samsung Galaxy SII GT-9100 from Luxembourg. The mobile is rooted. It has Gingerbread.XXK13, version 2.3.5 , os archit : Armv71, Os kernel : Linux , and Pc code Gt-I9100LKAKOR. So I put a number on the screen and find out the original version was Phone MS2 CSC LS2LUX, PDA LSW. I had a change hide my root from Superuser so I can download throught Odin 3-1.85 the official firmware for Luxembourg Jelly bean 4.1.2 (I live in Greece and Kies supportes Jelly bean 4.1.2 but when I plug in the mobile Kies was recognizing it was rooted and says no update ) Anyway I tried to flash and Odin says Added with yellow but then I place PDA from Lux and its not working, odin is freezing and I have to close it. And from the first time and then my phone starts to have a signal that is overheated even if it cold. and It dosent rebboot only if it is at socket and charges.
Any help how I will escape overheating problem and do the update correct ??
thank you !
vasilikiser said:
A friend send me a Samsung Galaxy SII GT-9100 from Luxembourg. The mobile is rooted. It has Gingerbread.XXK13, version 2.3.5 , os archit : Armv71, Os kernel : Linux , and Pc code Gt-I9100LKAKOR. So I put a number on the screen and find out the original version was Phone MS2 CSC LS2LUX, PDA LSW. I had a change hide my root from Superuser so I can download throught Odin 3-1.85 the official firmware for Luxembourg Jelly bean 4.1.2 (I live in Greece and Kies supportes Jelly bean 4.1.2 but when I plug in the mobile Kies was recognizing it was rooted and says no update ) Anyway I tried to flash and Odin says Added with yellow but then I place PDA from Lux and its not working, odin is freezing and I have to close it. And from the first time and then my phone starts to have a signal that is overheated even if it cold. and It dosent rebboot only if it is at socket and charges.
Any help how I will escape overheating problem and do the update correct ??
thank you !
Click to expand...
Click to collapse
start odin with admin rights and close kies in task-manager (KIES.exe)
thank you but Odin is not working if I open it as administrator .. other solution
vasilikiser said:
thank you but Odin is not working if I open it as administrator .. other solution
Click to expand...
Click to collapse
dont try flashing a rom using odin but flash a custom kernel instead
siyah v6.0b5 would be the best option to start and then try flashing the rom using the recovery
Hope it helps mate
Thank you for youe time ,, can you be little bit more specific ? sorry I dont have the knowdledje and I need my mobile I dont want to make a damage..
me galaxy is rooted the real is PDA : LSW phone MS2 and CSC LS2 (LUX) but now after rooting (this is how I got it rooted is CSC OXAK13 Phone K13 AND PDA K13.. so ? what do I do ?
Thank you for youe time ,, can you be little bit more specific ? sorry I dont have the knowdledje and I need my mobile I dont want to make a damage..
me galaxy is rooted the real is PDA : LSW phone MS2 and CSC LS2 (LUX) but now after rooting (this is how I got it rooted is CSC OXAK13 Phone K13 AND PDA K13.. so ? what do I do ?
vasilikiser said:
Thank you for youe time ,, can you be little bit more specific ? sorry I dont have the knowdledje and I need my mobile I dont want to make a damage..
me galaxy is rooted the real is PDA : LSW phone MS2 and CSC LS2 (LUX) but now after rooting (this is how I got it rooted is CSC OXAK13 Phone K13 AND PDA K13.. so ? what do I do ?
Click to expand...
Click to collapse
use the following link mate for flashing the kernel i suggested
http://www.google.co.in/url?q=http:...iA4ZzA&usg=AFQjCNEyxoN6ZrQnShBzL3rSb4aKGkJGyw
And then this to flash a rom of your choice
Get into CWM
Power off the phone.
Hold down the Volume Up button at the same time as your hold the power button and home button until the phone vibrates once. As soon as the phone vibrates once release the power button while continuing to hold Volume Down
Step 1: Understanding CWM, usage.
Before doing anything, navigate to "Backup and Restore" and select backup and confirm. This is known as a nandroid backup. If you ever are caught in a bind you will navigate here and select Restore instead of Backup in this menu.
Now is play time without many worries. Restart back into the normal Android system and gain access to your internal SD card via USB on your computer. Copy your ROM to "the root" of your SD card.
Restart back into CWM.
You're ready to flash, but right before flashing any ROM perform the following steps:
Select wipe data/factory reset and confirm
Select wipe cache partition and confirm
Select advanced - wipe dalvik cache and confirm
Select install zip from SD card
Select from internal SD card or wherever you placed it.
Select the ROM file and confirm.
Once the bottom line says complete you'll have access to the menu to select Go Back and then Reboot system now.
All done!
Gud luck mate
Read well before you start