Hello
I have a question to do with the jtag, actually a couple of questions.
So here is what happened:
I have (or had :crying: ) an samsung galaxy s2 and I think I have hard bricked it, don't know how tough. I was prompted to download the updates for the apps i have on the play store, afterwards i came across an error saying something like 'failed to install'. And after that everything started crashing, so i thought a restart would do the trick and fix it. So i left it for about 5 minutes and the it still hasn't shut down, so the best thing i could think of was to take out the battery, afterwards i couldn't turn it on(No vibration, screen was black) I have tried the usb jig and failed (either because i was using Stock ICS or probably because the bootloader has been messed up somehow), So the last thing i could try is to send it off to a company near my area who jtag phones(already found one).
The cost is not that big so it doesn't really matter to me (only £25) and im about 99.9% sure that i will do this, but i just want to know a couple things to be sure before i send it off to be jtagged.
1. Does my whole phone memory get deleted in the process?
2. Will a jtag solve my problem?
3. After the riff box or something other has finished jtagging my phone, will i be able to use the phone normally and be able to flash roms?
4. Does jtagging affect anything else other than the software (bootloader,modem etc....) ?
5. Will jtagging my phone bring any thing extra (except the fact that it will work :3 )?
And also i am not really worried if it don't ever work any more because i do have any other sgs2 that i can use but having 2 would be better for my personal use ( long story about why). Any answers will be appreciated. And sorry if i posted this in the wrong sub-forum but i guess it is mostly questions so i think i got it right.
Thanks
If you haven't rooted or installed a custom rom, send it for warranty repair. No need for Jtag.
Sent from my Galaxy S2 GT i9100
boki9999 said:
If you haven't rooted or installed a custom rom, send it for warranty repair. No need for Jtag.
Sent from my Galaxy S2 GT i9100
Click to expand...
Click to collapse
i have rooted and installed custom rom's on it many times, but i have reset my flash counter using some program by an xda dev. i dont seem to have a warranty and i'm willing to pay £25 for the jtag so that i don't have to wait long for my phone to be back where it belongs i just want to know a couple of things before i send it off
Well, as far as I know, Jtag brings your phone back into clean factory working state. And I think the entire memory is wiped.
A new bootloader is installed as well since the phone cant be booted. When the bootloader is screwed, the phone is bricked beyond repair for the user. Everything stock is installed, similar to flashing stock rom.
After that you can flash roms again like nothing happened.
And Jtag doesnt bring anything else than a working phone.
Sent from my Galaxy S2 GT i9100
boki9999 said:
Well, as far as I know, Jtag brings your phone back into clean factory working state. And I think the entire memory is wiped.
A new bootloader is installed as well since the phone cant be booted. When the bootloader is screwed, the phone is bricked beyond repair for the user. Everything stock is installed, similar to flashing stock rom.
After that you can flash roms again like nothing happened.
And Jtag doesnt bring anything else than a working phone.
Sent from my Galaxy S2 GT i9100
Click to expand...
Click to collapse
Thanks for the answer, i was hoping it wouldn't wipe the memory (Internal 16gb that i have) because i have data on it that would be useful for me but as long as i get this phone working i'm happy Thnaks again
Well, you could ask the serviceman what could be done with the data...
Sent from my Galaxy S2 GT i9100
I asked but no luck :L, because of how jtagging is done there is no way of retrieving the memory its self. Now i know to always use external SD cards. I still don't get how it happened though since i wasn't flashing anything and haven't flashed anything for the past 2-3 months
Related
I think I've bricked my Galaxy S II.. I got it yesterday and tried to flash 2.3.5. When I was flashing with Odin, the program went unresponsive and crashed. There was nothing else to do but take out the battery.. I shouldn't have done it, but I did. And now it won't turn on at all. I've tried the 3 button method, for download mode, and a jig from my old i9000. Nothing has worked. The screen wont even turn on. I don't know what to do... Help Please??
you need a jtag.If it wont go into download or recovery its gone.
What do you, Jtag? I've got a usb jig, does that work? Or are they the same thing?
*What do you mean
aren't jigs phone-specific?
Any new info on this? Did jtag worked or whatever. I keep eye on this thread but looks like OP disappeared. Genuinely curious what happened with the phone.
Hmm .. very wierd that phone wont turn on ... i have broken Odin flashes purposedly many times myself but always I can get back into it ...
You could try power drain ... remove battery ... press power on button for 10 seconds (WITHOUT BATTERY IN) ... now put battery back in and try to go into Download mode.
Sorry but i got busy with other stuff but wanted to explain to him about the JTag.Its a special box called a RiffBox JTag and what it does is basically wipes the motherboard/bootloader and in most phones repears the bootloader aswell of a fully bricked phone so it can be put into download mode again letting you re-flash via Odin and thus saving your phone.A little miracle that means no more bricked phones.There doesnt seem to be that many around and to buy they aint cheap at all but if you can find a dealer or a phone shop who has one they can do it for you.For example.I bicked my phone and was going to buy the box on ebay.es imported (in spain there isnt any for sale) for 160euros complete or 140 without cables.Searched this site:
http://www.jtagbox.com/riff-jtag-bo...s-unbrick-bricked-phone-riff-box-owners-list/
and found a shop in Barcelona who did it for me for 35euros plus postage "BARGIN!!!!".If you search youtube and google for RiffboxJtag in your country you should find someone with a unit willing to help out or check the link ive given as it has a list of users worldwide.
EDIT:A jig is not a JTag.A jig will boot your SEMI-BRICKED(phone showing some kind of life ex.classic icon of phone/arrow/computor,menu and back arrow lights work e.t.c.) phone into download mode.A FULLY-BRICKED(dead,no signs of life.wont start.no download,recovery,lights nothing.DEAD!!!) phone needs a JTag
@cooza , Thanks for that explanation and site I even found one near me, that some day might come handy.
I must ask now to further clear my doubts, this riffjtag box, like you said is able to "revive" or "unbrick" _any_ bricked SGS2? No matter how bad is it? Im kinda new around these things and trying to suck up as much info/knowledge possible, before I decide to flash/root/?brick? xD haha ( hope not for last one) my phone.
Devourz said:
@cooza , Thanks for that explanation and site I even found one near me, that some day might come handy.
I must ask now to further clear my doubts, this riffjtag box, like you said is able to "revive" or "unbrick" _any_ bricked SGS2? No matter how bad is it? Im kinda new around these things and trying to suck up as much info/knowledge possible, before I decide to flash/root/?brick? xD haha ( hope not for last one) my phone.
Click to expand...
Click to collapse
Hi.As i said before there are semi and hard bricked phones.A semi bricked phone can normally be booted into download mode with the 3 button combo or a jig and your away again.It has the usuall symbol of a phone and a PC with a warning sign in the middle of them.Hard bricked is when the bootloader is damaged and there is basically no return.You got yourself a very expensive paper-weight for the office desk.Its like trying to turn on your phone with no battery in it.Dead,gone and not coming back.Before the Riffbox the only solution was the rubbish bin or maybe change the motherboard(but a few years ago that was an extremely pricey task if possible).Now we have the box.You can screw you phone to the point of no return and still the box will bring it back to life as it wipes the motherboard and in the case of the SGS2 also repears the damaged bootloader which is what boots your phone to start with.One thing to know,and i dont know if it happens to everyone but mine came back with 2.3.3 installed but there was no recovery mode.If this happens all you have to do is re-flash via Odin a more reciente firmware WITHOUT PIT FILE and yourll get recovery mode back at reboot.Obviously youll need to plug in your phone before hand to re-install the drivers.Same with Odin.boot to download,plug in,installs,unplug,then open Odin and flash.
EDIT:yourve got my name there so if something ever happens and you need a hand to re-flash after a jtag just send me a private message.Here to help.
SamBroomby said:
I think I've bricked my Galaxy S II.. I got it yesterday and tried to flash 2.3.5. When I was flashing with Odin, the program went unresponsive and crashed. There was nothing else to do but take out the battery.. I shouldn't have done it, but I did. And now it won't turn on at all. I've tried the 3 button method, for download mode, and a jig from my old i9000. Nothing has worked. The screen wont even turn on. I don't know what to do... Help Please??
Click to expand...
Click to collapse
im not juding you...but next time is better to flash with CWM.
Odin only for root kernel...
cooza said:
Hi.As i said before there are semi and hard bricked phones.A semi bricked phone can normally be booted into download mode with the 3 button combo or a jig and your away again.It has the usuall symbol of a phone and a PC with a warning sign in the middle of them.Hard bricked is when the bootloader is damaged and there is basically no return.You got yourself a very expensive paper-weight for the office desk.Its like trying to turn on your phone with no battery in it.Dead,gone and not coming back.Before the Riffbox the only solution was the rubbish bin or maybe change the motherboard(but a few years ago that was an extremely pricey task if possible).Now we have the box.You can screw you phone to the point of no return and still the box will bring it back to life as it wipes the motherboard and in the case of the SGS2 also repears the damaged bootloader which is what boots your phone to start with.One thing to know,and i dont know if it happens to everyone but mine came back with 2.3.3 installed but there was no recovery mode.If this happens all you have to do is re-flash via Odin a more reciente firmware WITHOUT PIT FILE and yourll get recovery mode back at reboot.Obviously youll need to plug in your phone before hand to re-install the drivers.Same with Odin.boot to download,plug in,installs,unplug,then open Odin and flash.
EDIT:yourve got my name there so if something ever happens and you need a hand to re-flash after a jtag just send me a private message.Here to help.
Click to expand...
Click to collapse
Thank you mate! I am getting my SGS2 this week so ive been doing alot of reading and research about everything. Thanks for your contribution and kind offer to help if ever comes to that. Very appreciated.
No worries mate.truth is its very hard to fully hard-brick an i9100.The main thing to watch out for,and its a mistake that first-time users/flashers have done,is to flash there i9100 phones with i9000 firmware by mistake.An SGS is not an SGS2 and if they are mixed you WILL hard-brick your device.Here on XDA everything is clearly marked and on their right pages so you cant go wrong if you take your time dont rush-in.But just in case you havnt seen it heres the thread:
Firmwares:
http://forum.xda-developers.com/showthread.php?t=1075278
CF-Root Kernels: (if you feel the need)
http://forum.xda-developers.com/showthread.php?t=1103399
Hi, dont bother faffing with it mate, if you have only had it a day take it back and tell them it wouldnt boot after an automatic Kies update. If they cant turn it on they wont know you bricked it until it gets back to the factory and to be honest after selling 10 million of these babies they wont even bother checking it out, they'll just put it into spares or straight recondition it.
I did the same thing to my xoom, PC world couldnt turn it on so they just gave me another.
So I had previously rooted my SGSII, and decided to try installing CM7 on it. I used CWM Recovery and ran it off the SD card, and everything appeared to work fine. I think I had a bad/not fully functioning CWM or something, as it didn't list an option to backup anything (I'm guessing because I flashed the stock kernel after rooting?) Anyway, it will no longer boot. I can access download mode, but Odin fails everytime I try to flash anything back on there. When I try to boot my phone, I just get a "Firmware upgrade encountered an issue" error.
EDIT: I just tried again as I was writing this, after rebooting, reinstalling my drivers and rebooting my computer. I was able to get the Firmware to flash properly in Odin. Now I have my phone booting and getting stuck on the "Samsung Galaxy SII GT-I9100 splash screen... Doesn't seem to go any further than that though, unfortunately.
Any ideas what I can do? Is it possible that I need re-flash a bootloader or something ??
Any help would be supremely appreciated!
So I was just trying to re-install the Kernel, using the CF unsecured kernel, and it failed, but when I try to go into recovery mode, it looks as though it managed to install CWM Recovery. I have no idea what to do from here, and am sort of afraid to do anything for fear or bricking the phone completely...
I'm hoping someone out there knows how to fix this, I feel like such a tool
As long as you can get into download-mode, your phone isn't bricked.
If you switch from or to a TouchWiz-based ROM, you have to do a full-wipe in the recovery.
Sent from my GT-I9100 using XDA App
Go back to stock first via download mode via odin
Nah you're good. Similar thing happened to me at my first flashing attempt. Get your stock firmware from Intratech's thread, put the phone into download mode & flash the firmware via Odin.
Then maybe have another go at rooting the phone with the matching CFRoot kernel.
Porkchops said:
So I was just trying to re-install the Kernel, using the CF unsecured kernel, and it failed, but when I try to go into recovery mode, it looks as though it managed to install CWM Recovery. I have no idea what to do from here, and am sort of afraid to do anything for fear or bricking the phone completely...
I'm hoping someone out there knows how to fix this, I feel like such a tool
Click to expand...
Click to collapse
yes, if you can still go in download mode it's no so difficult..this "small brick" it's on of "Android things to do" once in your SGS2 life
Hi guys. I'm in a worst situation. As my phone after a failed ODIN downgrade from Android 2.3.6 to one stock kernel is completelly dead - it doesn't boot anymore - not even managed to put it back into download mode or revert to fact defaults (no keys, no lights not even battery charging displayed when pluged in) - tryed the USB jig also. Nothing worked.
The question is: Will Samsung manage to repair and how much will it cost - an average ammount offcourse. Because I guess it's out of the question to be considered a warranty issue. I guess it will be visible somebody have done smth to the ROM by a software approach....
This is the short story because I would bore you to discuss all the things I have been through - it was only my faoult out of stupidity
HELP!
I don't see why Samsung wouldn't fix it ? As to how much they'll charge you, I think you'll find that will vary from country to country (labour costs being variable, etc). No, I don't think you'll be able to have it repaired under warranty.
You might want to look at having it JTAG repaired by someone other than Samsung. This will possibly be cheaper than having Samsung repair it. Do a search on here/Google.
alexdonc said:
The question is: Will Samsung manage to repair and how much will it cost - an average ammount offcourse. Because I guess it's out of the question to be considered a warranty issue. I guess it will be visible somebody have done smth to the ROM by a software approach....
HELP!
Click to expand...
Click to collapse
Thank you very much. I have searched alot to actually understand - unfortunatelly for me it will cost... I saw on youtube a JTAG in action right now (cannot post the link yet). I understand now it is the only way. I'll keep you posted guys. Tomorrow I'll go to service.
I'm sorry it's going to cost Alex. A difficult thing to happen, I know
Here's a link for a JTAG repairer in the US who is also a member here, tho I see you've already found one. I'm sure doing it this way will be cheaper/probably faster than having Samsung do the repair as well.
alexdonc said:
Thank you very much. I have searched alot to actually understand - unfortunatelly for me it will cost... I saw on youtube a JTAG in action right now (cannot post the link yet). I understand now it is the only way. I'll keep you posted guys. Tomorrow I'll go to service.
Click to expand...
Click to collapse
Thax. Funny thing is that this is exactly the thing I found - the same mobiletechvideos in US Now I allready have an ideea of how much should cost that. Hopefully I'll find a local GSM repair shop with the posibilitty to unbrick it cheep - or at least not much than 50USD - in local currency ofcource.
I'm still thinking if it is possible to use an ATMEL copy process - like in the old times for EEPROMS - I have done that in the past. In theory it might work but I will never do it - alredy scared about what happened to my beloved droid.
Thx again Mistah and have a gr8 day and a wonderfull new 2012!
Yeah I've seen a report or two on here from people who have used his service & have been happy. Must admit I found his page when thought I'd bricked my phone after my first flash attempt messed up. Yeah you might be able to get it done cheaper somewhere local, and that will mean less time without the phone for you without the phone in mail from you to the US & back again.
Let us know how you get on, your experience will be a good guide for people in future who have the same problems as you.
No probs man, happy to give you the little help I did. You too Alex Hope you have a great year & you get your phone back & working soon
alexdonc said:
Thax. Funny thing is that this is exactly the thing I found - the same mobiletechvideos in US Now I allready have an ideea of how much should cost that. Hopefully I'll find a local GSM repair shop with the posibilitty to unbrick it cheep - or at least not much than 50USD - in local currency ofcource.
I'm still thinking if it is possible to use an ATMEL copy process - like in the old times for EEPROMS - I have done that in the past. In theory it might work but I will never do it - alredy scared about what happened to my beloved droid.
Thx again Mistah and have a gr8 day and a wonderfull new 2012!
Click to expand...
Click to collapse
Hello again. Solved right now. The service didn't charged me at all - I was kind of lucky after all. Unfortunately there are still some issues I have from the start. I'll keep on digging - software related.
Hi!
I just had the weirdest experience with my sgsii
I have been using the unofficial vsync patched cm10 rom for this modelfor the last month or so.
I have been updating at least one per week but this week I decided to give my phone a break and not flash it... i am actually really busy at job.
Suddenly tonight, the phone looked like when you have a SOD... so i just pulled the battery.
Now, it does not pass from the first logo stage, just prior to start booting.
I cannot access cwm recovery either, but download mode seems to work-
Now the odd thng is that i am attempting to flash somethng to get the phone working but it gets stuck in the step "NAND Write start!".... it goes no furter than that...
I have chosen the options auto reboot and f.reset time.
a pda file, phone and csc file from the eaked jb rom.....
The system I am attempting to flash from is a windows 7 pro 64 bit.... and odin is Odin3 v1.85...
Please, tell me i didnt get a brick and there is a way tofix it... :crying:
EDIT: Desperated, i tried to flash latest jb leak again, and chose the pit file that comes with it, which re-partitions the phone...
After 20 minutes not responding, i pulld the battery out... now i cannot even enter download mode....nothing....nada....
Sounds like you bricked it, good job.
Sent from my GT-I9100 using Forum Runner
GFXi0N said:
EDIT: Desperated, i tried to flash latest jb leak again, and chose the pit file that comes with it, which re-partitions the phone...
After 20 minutes not responding, i pulld the battery out... now i cannot even enter download mode....nothing....nada....
Click to expand...
Click to collapse
too bad never repartition unless you make your own pit file with heimdall .. if you would've wait a couple hours I just pmed you.
and for other people instead of flashing samsung's bricksquadroms you can flash CM9 resurrection edition. http://forum.xda-developers.com/showthread.php?t=1419102
Make a pit file with heimdall of your own device. Don't trust pitfile that comes with a rom.
I re-partitioned my device and i got like 3GB intern memory back.
There's probably a way to get your device alive. it isn't the mmc cap bug so. search some threads on xda about brickbugs etc of galaxy phones and you'll find people who hardbricked and unbricked their device.
Probably usb jig could get you into download mode i'm not sure though. Or else jtag. Ask some people over there they will know it
I will try to revive it with jig.... i must find the thingy though.,..... if not.. i will send it to the service but i'm not sure i'm on warranty....
Being not patient made me f*ck it up bad....
Any clue on how to recover a phone after re-partitioning.... i really don't know where to start...
EDIT: JIG does not switch it on either... why did i have to re-partition?!??!?!?!?!?!
That was a dumb move....... any more ideas?
If you cant enter recovery or download mode you have no choice but to JTAG repair or mobo replacement.
Hard brick.... on its way to service
Wish me luck..
Mobo replacement it is, this incident will at least teach you to be patient, I explained you my problem in PM, I waited for 1 week for USB jig to arrive from eBay then flashed stock ROM. I trust the f/w it came with the most.
Sent from my GT-I9100 using xda app-developers app
Sh4Dy said:
Mobo replacement it is, this incident will at least teach you to be patient, I explained you my problem in PM, I waited for 1 week for USB jig to arrive from eBay then flashed stock ROM. I trust the f/w it came with the most.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
USB JIG didn't work at all..... I have one and it was not able to boot the phone ....
Isn't this kind of brick fixable with Jtag?
Sent from my GT-I9100
Ok, before I repartitioned, making the problem worse, I was experiencing some kind of R/W problem..... there was something odd with the nand because I was able to boot in download mode, but not in recovery (CWM) mode....
Then, when I plugged the phone to the computer, Odin was able to recognize the phone.
I followed some thread around XDA to flash 4.1.2 leak from sammy and when I hit the "Start" button in Odin, it would not pass from the first stages, revealing that R/W or I/O problem.... the internal nand was, somehow broken.... it didn't read or write properly.... so, even If i could find a workaround, I would have lost some internal storage (some posts talk about around 3 Gb or something similar as lost space in these cases).... that is IF i had been able to fix it..... but then, that's what warranty is for..... so I gave it a last (dumb) try..... including the pit file, which attempted a format, which ended messing (i would say the f. word) everything up.
The good side is that unable to even boot, at least i lost the blue loading bar the vsync patched cm10 mod has in the first bootup screen.... which could have revealed to sammy that I was tempering with unofficial roms....
Lesson learned: Be patient people: But also, don't think this could not happen to you: The phone was perfectly working the last time I saw it... and I even was making some phone calls and browsing the internet.... I mean... it gave no prior symptoms or warnings... I t just died..... I guess I have to be glad I'm not one of those people whose phone gets caught up on fire on their pockets for malfunctioning.....
Now waiting for it to come back revived from samsung..... I have hope
hope it will be able to recover
Great: After losing the phone and past almost three months, samsung says the phone has been manipulated and the warranty is voided....
I wasn't able to flash back an original firmware prior to sending it to the tech service.....
What do you recommend me to do?
I guess paying for the repair would be quite expensive....
GFXi0N said:
Great: After losing the phone and past almost three months, samsung says the phone has been manipulated and the warranty is voided....
I wasn't able to flash back an original firmware prior to sending it to the tech service.....
What do you recommend me to do?
I guess paying for the repair would be quite expensive....
Click to expand...
Click to collapse
Well what is it you expect us to say, some secret magic word that will fix it for free?
The choice is pay for it to be fixed or dont.
So no magic word or secret passphrase so they will upgrade my device to a SGSIV for free?
Damn.....
I'm asking for advice, since I'm convinced the brick was not caused by flashing anything.....
Does anyone have any experience with this in the past to know more or less how expensive bill could I be facing for the repair?
GFXi0N said:
So no magic word or secret passphrase so they will upgrade my device to a SGSIV for free?
Damn.....
I'm asking for advice, since I'm convinced the brick was not caused by flashing anything.....
Does anyone have any experience with this in the past to know more or less how expensive bill could I be facing for the repair?
Click to expand...
Click to collapse
Dude, it WAS caused by flashing something.
Initially your device wasn't "bricked" and was likely a kernel issue and possibly a dirty usb data connection.
The point when it was bricked was when you tried flashing the pit file, had bad connection and you then pulling battery. This f**ked your nand chip up and only way to fix it is to replace motherboard.
You will need to either purchase a mobo replacement and replace it yourself or pay somebody to purchase/replace it for you. Probably looking at around £100.
When bricks happen, you really need to BRICK it before claiming warranty.
I've got a couple of guys here that own a PhD in bricking.
Brick is the new flash.
Sent from the little guy
Jig wasn't working
Flashing anyting.. even just a recovery wasn't working
FLashing official didnt work
Flashing CM didnt work either
Tested different cables and different ports
It was f*cked up already... anyway: 4 samsung devices owned: 3 gave problems of hardware..... that cannot be a coincidence...
Repartitioning erased my tracks, if anything... because the 3 key combo for recovery was working until then..... but either way they managed to access the memory somehow, I guess.....
GFXi0N said:
anyway: 4 samsung devices owned: 3 gave problems of hardware..... that cannot be a coincidence....
Click to expand...
Click to collapse
Maybe a PEBCAK?
GFXi0N said:
Jig wasn't working
Flashing anyting.. even just a recovery wasn't working
FLashing official didnt work
Flashing CM didnt work either
Tested different cables and different ports
It was f*cked up already... anyway: 4 samsung devices owned: 3 gave problems of hardware..... that cannot be a coincidence...
Repartitioning erased my tracks, if anything... because the 3 key combo for recovery was working until then..... but either way they managed to access the memory somehow, I guess.....
Click to expand...
Click to collapse
Don't blame the phone, blame the user.
Yeah, sure... anyway... thanks for the help... I hope some day you need it and someone will come not trying to mocking you..... anyway... this is the trend around here lately...
Happy trolling
I'm running stock JB with siyah kernel on my SGS3 GT-I9300. I wanted to try out a rom from CyanogenMod but when I was flashing it through CWM, my phone froze!! Now, it's not powering on. It's not going to download mode or recovery mode. I'm scared now. I flashed the right file, I know that. But somehow, it didn't work. Any ideas?
Also, I wanna know, that if I take it to Samsung Care, will they be able to make out that my phone was rooted before? Because device status was modified & flash counter was around 12 before I hard-bricked (atleast that's what I think) my phone.
Please help me out.
P.S. I'm new here. So, move my thread to any category which you think is suitable for it. I thought it should be in this category, so I posted here.
saurabh_goyal93 said:
I'm running stock JB with siyah kernel on my SGS3 GT-I9300. I wanted to try out a rom from CyanogenMod but when I was flashing it through CWM, my phone froze!! Now, it's not powering on. It's not going to download mode or recovery mode. I'm scared now. I flashed the right file, I know that. But somehow, it didn't work. Any ideas?
Also, I wanna know, that if I take it to Samsung Care, will they be able to make out that my phone was rooted before? Because device status was modified & flash counter was around 12 before I hard-bricked (atleast that's what I think) my phone.
Please help me out.
P.S. I'm new here. So, move my thread to any category which you think is suitable for it. I thought it should be in this category, so I posted here.
Click to expand...
Click to collapse
That`s weird, did it just froze during the flashing? I can`t imagine how that could hardbrick your phone since Cyanogenmod doesn`t touch the bootloader. At least download mode should work. BTW what version of Siyah Kernel did you use?
Yeah if you can`t even access download mode then there is probably nothing you can do. You can try a USB Jig but if that`s not working too then take it to a Samsung Service Center and play dumb. Say the phone just wouldn`t come on. And if they can`t access download mode then I highly doubt that they can see if your phone is rooted.
Thanks a lot
Scarface1991 said:
That`s weird, did it just froze during the flashing? I can`t imagine how that could hardbrick your phone since Cyanogenmod doesn`t touch the bootloader. At least download mode should work. BTW what version of Siyah Kernel did you use?
Yeah if you can`t even access download mode then there is probably nothing you can do. You can try a USB Jig but if that`s not working too then take it to a Samsung Service Center and play dumb. Say the phone just wouldn`t come on. And if they can`t access download mode then I highly doubt that they can see if your phone is rooted.
Click to expand...
Click to collapse
Thanks a lot for your answer. I'm an experienced flasher and I flash roms on daily basis that's why I'm also very shocked at this.
I have a USB jig from the days when I used to have Samsung Galaxy S2, but it's not working with my S3.
Anyways,I'll take my phone to Samsung Care only I guess. :crying:
P.S. Even after changing the motherboard or something, they won't know? Cuz otherwise I'm out 40000 rupees!! (I live in India)
EDIT: I was using Siyah kernel v1.8.9.
If Samsung get it to boot then its no warranty but probable that they will put it down to SDS and just change the motherboard .
jje
saurabh_goyal93 said:
Thanks a lot for your answer. I'm an experienced flasher and I flash roms on daily basis that's why I'm also very shocked at this.
I have a USB jig from the days when I used to have Samsung Galaxy S2, but it's not working with my S3.
Anyways,I'll take my phone to Samsung Care only I guess. :crying:
P.S. Even after changing the motherboard or something, they won't know? Cuz otherwise I'm out 40000 rupees!! (I live in India)
EDIT: I was using Siyah kernel v1.8.9.
Click to expand...
Click to collapse
Ok that`s really weird. I suppose it`s just some hardware failure then. Of course that it happened while you flashed a ROM is very unfortunate.
If they change the whole mainboard then all information that was on the old mainboard will be gone. There is no way after they change the mainboard that they will see if you were rooted or not.
Hey guys !
Well...
Yesterday, I decided to flash a new ROM on my aunt's SII...
It wasn't the first time I did this : my own phones have all been flashed, I know how it works !
But... I got a problem ! While I was wiping the data/cache, the phone got stuck on this step. Then, shut down. And now, it doesn't boot anymore. Screen stays black. I did everything I found on the web : tried to boot on recovery and on download mode, tried to press the buttons to get into these modes and inserting the battery while pressing, tried to connect it on USB (not even detected)...
After some researches, I found out that it was a eMMC problem...
Anyway, in a nutshell, my phone is hard bricked. What can I do ?
Thanks.
rohecla said:
Hey guys !
Well...
Yesterday, I decided to flash a new ROM on my aunt's SII...
It wasn't the first time I did this : my own phones have all been flashed, I know how it works !
But... I got a problem ! While I was wiping the data/cache, the phone got stuck on this step. Then, shut down. And now, it doesn't boot anymore. Screen stays black. I did everything I found on the web : tried to boot on recovery and on download mode, tried to press the buttons to get into these modes and inserting the battery while pressing, tried to connect it on USB (not even detected)...
After some researches, I found out that it was a eMMC problem...
Anyway, in a nutshell, my phone is hard bricked. What can I do ?
Thanks.
Click to expand...
Click to collapse
what stock firmware version was the Phone when u did the wipe from recovery (if it was on ICS 4.0.4 then ur phone will be bricked because of the kernel of ICS4.0.4 being plagued with the 'EMMMC' brick bug and only a JTAG or a MB replacement is the solution for it) .
JTAG won't work; motherboard replacement or bin.
I think it was 4.0.4...
Motherboard replacement is the only thing I can do ?
Mate.... Samsung KNOWS this is a problem.......I'd try for warranty repair/replacement.....if the phone is less than two years old, you have a good chance......
Just remember to 'act dumb' at the service center..... Tell them you were trying to use kies to update from ICS and the phone died...... If it is the emmc brickbug, there's NO WAY they can check what os was on ur phone or whether you'd rooted or modified it in any way.....right now it's an unrecoverable (expensive) paperweight........
This might be my S2, or it might be my W...but it's definitely CM
Yeah, I saw this is a quite common problem... But often, it's just a soft brick. In my case, it's a hard brick...
And warranty expired two months ago...
Well, it's unlikely to succeed, but you could try emailing Samsung explaining your situation regarding expired warranty and going on to explain that updating with kies is a 'normal' procedure and that it's that 'normal' Samsung provided procedure plus the 'unstable' OS version (having read on the internet about 4.0.4 brickbug) that have killed a phone that would otherwise be working today. Stress the point that the ICS firmware AND kies were both supplied by Samsung for official (end user) use on Samsung devices......see what they say.....can't hurt right?
This might be my S2, or it might be my W...but it's definitely CM
Yeah, they're going to honour an expired warranty. That happens all the time
Mb....I *did* say right at the start that it probably wouldn't work..... But what has he got to lose?
Lol.....they *might* be suffering from an excess of Xmas and new year goodwill.......
This might be my S2, or it might be my W...but it's definitely CM
I have twice super bricked my two SGS-2s.... EMMC bug is one hell of a pain in ass. You have to let go some SD card space, but u can revive you phone using the URL in my signature. I revived both my phones losing about a GB space in one and a couple GBs in other. Good Luck
alvinasnow said:
but u can revive you phone using the URL in my signature
Click to expand...
Click to collapse
People have said he needs a new motherboard.Do you know something they dont?.
S4 victim
The problem is that I can't flash anything ! The phone simply doesn't turn on ! No recovery mode, no download mode, nothing ! It doesn't even charge !
Yes try this link from alvinasnow
http://forum.xda-developers.com/showthread.php?t=1667886
So far as I know if you only connect your phone normally if it os charging then it already has some kind of connection with the pc I believe its adb.
But since you dont have warranty you can give it a shot to save money so just give it a try and read carefully. I was surprised when I got this phone, that samsung would make a big mistake like that its a just shame.
Edit: i dont know or you need jtag or riff and I will not test it cause I dont have a superbrick phone with mmc cap erase.
But just open device manager on the pc and connect the phone and see if there is a new device connected.
In my opinion my previous phone has one of the best options to make it unbrickable
It was nvflash but it sucked.nvidia wouldnt release sources.
Gooodluck with your phone
Sent from my GT-I9100 using Tapatalk
Which part of this phone needs a motherboard replacement are you lot having trouble comprehending ?
OK...For all the slow kids who keep posting to this thread (including the OP); this phone needs a new motherboard. No threads promising magical fixes are going to work, there is no other way to fix this.
Is this clear now or do I have to make another post in bolded caps to make it really clear ?
There is a SLIGHT chance that if a JTAG recovery house can boot a kernel via JTAG (I do not know if RIFFBox can do this or not), they can use the solution that the Kindle Fire community used. (This was a recent discovery 2-3 months ago)
The problem is, I have attempted to provide information on this solution to these JTAG houses with no response. I don't know if they can boot a modified kernel via JTAG or not.
Currently:
All Exynos4 devices that are Superbricked are unrecoverable, as Samsung refuses to provide any way to boot these from USB, and anyone who could develop a solution hasn't responded (since most dead devices are long gone at this point...)
All Qualcomm-based Samsungs that are Superbricked are hosed too
Kindle Fires that are Superbricked are recoverable as of 2-3 months ago thanks to some discoveries by Oranav that were used by Hashcode to develop a recovery solution. This solution can't be used on Samsung Exynos4 devices as it depends on the ability to boot the device from USB.
And folks...... @Entropy512 needs to be listened to.......he is the dev who has done the most research into this issue and (somebody cmiiw) was the one who discovered the "emmc cap erase" command was the culprit. I think he also wrote the original (much copied) 'got brickbug' app which tells you if your phone is affected or not. If what he says doesn't work, then as @MistahBungle says, the ONLY OTHER OPTION is a new motherboard........
This might be my S2, or it might be my W...but it's definitely CM
Well...
I think I'm just going to call the insurance, and see what they can do ! Even if my warranty is now void, they may replace the phone !
Thank you all !