Hello!
I have an international Samsung Galaxy S3 I9300 and i want to install TurkbeyROM v8 [XXBLG9][Aroma][14 August 2012]
After install when i restart the phone it freezes when logo is showed (Samsung Galasy S3)
I waited for 30 minutes and nothing. I tryed every kernel from that rom but with the same result.
I searched the forum for someone who had the same problem but i didn't find any. Seems like i am the only one.
What can it be the problem ?
szeby33 said:
Hello!
I have an international Samsung Galaxy S3 I9300 and i want to install TurkbeyROM v8 [XXBLG9][Aroma][14 August 2012]
After install when i restart the phone it freezes when logo is showed (Samsung Galasy S3)
I waited for 30 minutes and nothing. I tryed every kernel from that rom but with the same result.
I searched the forum for someone who had the same problem but i didn't find any. Seems like i am the only one.
What can it be the problem ?
Click to expand...
Click to collapse
Every kernel from that rom does not make sense and was pointless .
Download a new copy of the rom read the instructions and flash as instructed .
jje
szeby33 said:
Hello!
I have an international Samsung Galaxy S3 I9300 and i want to install TurkbeyROM v8 [XXBLG9][Aroma][14 August 2012]
After install when i restart the phone it freezes when logo is showed (Samsung Galasy S3)
I waited for 30 minutes and nothing. I tryed every kernel from that rom but with the same result.
I searched the forum for someone who had the same problem but i didn't find any. Seems like i am the only one.
What can it be the problem ?
Click to expand...
Click to collapse
The problem is you are stuck in boot loops...boot into recovery..vol up+menu+power..clear data + cache+ advaced>dalvik cache..reboot phone now..it will work
Hi
I did do all that and nothing. If i install CF-ROOT from odin and after that i recover from a back-up of stock rom it's working and it's fiximg my phone but i junt want to install the turkbeyrom and it seeamns that i'm the only one with this problem.
I am trying to understand what is the problem .... the kernel ... the modem ...
zoot1 said:
The problem is you are stuck in boot loops...boot into recovery..vol up+menu+power..clear data + cache+ advaced>dalvik cache..reboot phone now..it will work
Click to expand...
Click to collapse
szeby33 said:
Hi
I did do all that and nothing. If i install CF-ROOT from odin and after that i recover from a back-up of stock rom it's working and it's fiximg my phone but i junt want to install the turkbeyrom and it seeamns that i'm the only one with this problem.
I am trying to understand what is the problem .... the kernel ... the modem ...
Click to expand...
Click to collapse
Follow the instructions given its you not the kernel not the modem .
jje
szeby33 said:
Hi
I did do all that and nothing. If i install CF-ROOT from odin and after that i recover from a back-up of stock rom it's working and it's fiximg my phone but i junt want to install the turkbeyrom and it seeamns that i'm the only one with this problem.
I am trying to understand what is the problem .... the kernel ... the modem ...
Click to expand...
Click to collapse
1. wipe data/factory reset
2. install the rom
3. don't tick off "reboot system" when installation finish, wipe partition cache & dalvik cache
4. Reboot
Related
Hello gurus,
I got a SGS2 I9100G. I tried to flash the CF-Root kernel in order to root but it failed.
I then went to download mode and tried to install Litening rom.
it always fail at the modem part.
I am so stupid that I did not first check the firmware version already installed !
I am now trying to re-install a stock version and none is working.
I tried vilain rom 1 (supposed to wipe everything) it completes with no error , but it stays stuck at the writing Samsung I9100G . (not the Samsung logo).
I can not go into the recovery mode.
I tried to flash a kernel and things got worse... now I have the 2 computers screen.... Please helppppppppppppppp
Thanks
Ok looks like what you've done is flash software meant for the I9100 model and not the I9100G.
Search through the threads till you find threads specifically about the G model. Read and read a lot. Not joking...read a lot.
Your gonna need Odin, gonna need to boot into download mode and gonna need to flash firmware for the I9100G model.
Hope this points you in the right direction.
Sent from my GT-I9100 using XDA App
You think that flashing a firmware for I9100G will solve the issue ?
thanks
pierreammoun said:
You think that flashing a firmware for I9100G will solve the issue ?
thanks
Click to expand...
Click to collapse
Yes. The I9100 and the I9100G are two different devices.
I have just updated to 4.0.4 on my galaxy s2 and have lost root. Ive looked about the forums and am really unsure of how to root it again, being concerned over the brick bug etc.
Is there a safe to re-root? CWM has been removed from apps so presume that has gone.
Anyone help please?
Cheers in advance
Lee
Method 1 from guide in my signature. No problems at all.
Odoslané z GT-I9100 cez Tapatalk 2
highlander317 said:
I have just updated to 4.0.4 on my galaxy s2 and have lost root. Ive looked about the forums and am really unsure of how to root it again, being concerned over the brick bug etc.
Is there a safe to re-root? CWM has been removed from apps so presume that has gone.
Anyone help please?
Cheers in advance
Lee
Click to expand...
Click to collapse
Which firmware did you upgrade to? Can you give more info...
Just flash Siyah kernel and you're good to go.
Sent from my Galaxy S2 GT i9100
boki9999 said:
Just flash Siyah kernel and you're good to go.
Sent from my Galaxy S2 GT i9100
Click to expand...
Click to collapse
I have the same issue. I am using the 3.0.15-I9100XWLPT-CL941023 blah blah blah Kernal, I updated to 4.0.4 with kies and lost root
If someone could explain to me how to get it back I would be very grateful.(noob here)
EnochPowell said:
I have the same issue. I am using the 3.0.15-I9100XWLPT-CL941023 blah blah blah Kernal, I updated to 4.0.4 with kies and lost root
If someone could explain to me how to get it back I would be very grateful.(noob here)
Click to expand...
Click to collapse
Download Siyah kernel (Tar for Odin!)
http://www.gokhanmoral.com/gm/2012/08/05/siyahkernel-s2-v4-0/
Kill all Kies processes in Task mnger
Open Odin (run as Administrator)
Boot phone in download mode (vol down+home+power)
Vol up to continue
Connect phone to pc, a field in Odin will turn yellow
Click PDA and select the file you downloaded
Make sure that Repartition is not ticked!!!!!!!!!
Click start
When it finishes, the field will turn green and say 'Pass!', phone will reboot
Thats it!
Sent from my Galaxy S2 GT i9100
kilometers4 said:
Which firmware did you upgrade to? Can you give more info...
Click to expand...
Click to collapse
I was om 4.0.3 just managed to flash to siyah kernal and that went ok. Now looking to flash to neutrino rom but not sure if I should do wipe or no wipe installation.
Cheers for the help so far
highlander317 said:
I was om 4.0.3 just managed to flash to siyah kernal and that went ok. Now looking to flash to neutrino rom but not sure if I should do wipe or no wipe installation.
Cheers for the help so far
Click to expand...
Click to collapse
When flashing a different rom, always do a full wipe(factory reset, wipe cache, dalvik cache) or else you'll end up in a bootloop.
Sent from my Galaxy S2 GT i9100
boki9999 said:
When flashing a different rom, always do a full wipe(factory reset, wipe cache, dalvik cache) or else you'll end up in a bootloop.
Sent from my Galaxy S2 GT i9100
Click to expand...
Click to collapse
SO now ive flashed to siyah kernal i cant get the brick bug is that right?
Sorry just dont wanna brick the phone so many horror stories out there
Cheers
Lee
No, you cant get the brick bug in Siyah. Its present only in Samsung kernels and ones based on it, like Cf-root.
Siyah is completely safe, dont worry.
Sent from my Galaxy S2 GT i9100
boki9999 said:
Download Siyah kernel (Tar for Odin!)
Kill all Kies processes in Task mnger
Open Odin (run as Administrator)
Boot phone in download mode (vol down+home+power)
Vol up to continue
Connect phone to pc, a field in Odin will turn yellow
Click PDA and select the file you downloaded
Make sure that Repartition is not ticked!!!!!!!!!
Click start
When it finishes, the field will turn green and say 'Pass!', phone will reboot
Thats it!
Sent from my Galaxy S2 GT i9100
Click to expand...
Click to collapse
TYTYTY
I am in your dept!
boki9999 said:
No, you cant get the brick bug in Siyah. Its present only in Samsung kernels and ones based on it, like Cf-root.
Siyah is completely safe, dont worry.
Sent from my Galaxy S2 GT i9100
Click to expand...
Click to collapse
Well I went ahead and flashed all looked ok but can't say that the neutrino rom was that good. Got problems with update me, saying new rom is available when 1.0.8 is install only to say 1.0.7 in about phone then simply crashes update me.
Think ill go back to stock before trying anything else for a while, should I go back to 4.0.3 or 4.0.4?Im staying with siayh kernal
Cheers
Siyah is compatible with 4.0.3, 4.0.4 (leaked / CM9) and 4.1.1 (CM10).
EnochPowell said:
TYTYTY
I am in your dept!
Click to expand...
Click to collapse
You're welcome.
Sent from my Galaxy S2 GT i9100
Hi i'm having a problem with this rom, I flashed the most recent lp7 kernel, the lp7 one from this thread http://forum.xda-developers.com/showthread.php?t=1631934
Used the latest version of the rom, flashed it no problems. Aroma completed the install without any troubles.
But now i'm stuck on the presentation screen of the phone that says samsung galaxy S2 model number (the first thing that pops up when you start the phone)
I've re wiped (dalvik and battery stats too) everything a couple of times, tried the latest syriah kernel, nothing works.
Any ideas or suggestions would be vastly welcome.
Ok reflashed a couple of times and now I 'm stuck on the cMIUI loading screen.
Beaverz said:
Hi i'm having a problem with this rom, I flashed the most recent lp7 kernel, the lp7 one from this thread http://forum.xda-developers.com/showthread.php?t=1631934
Used the latest version of the rom, flashed it no problems. Aroma completed the install without any troubles.
But now i'm stuck on the presentation screen of the phone that says samsung galaxy S2 model number (the first thing that pops up when you start the phone)
I've re wiped (dalvik and battery stats too) everything a couple of times, tried the latest syriah kernel, nothing works.
Any ideas or suggestions would be vastly welcome.
Click to expand...
Click to collapse
1. Siyah kernel is not compatible with GT I9100G. Don't flash kernels/ROMs meant for GT I9100.
2. Post the link of the Rom you flashed
3. List all the steps you took while flashing.
4. Please include any additional info, that you think will be relevant to solving your problem.
Swyped from my Samsung Galaxy SII
I think i might have found the problem, there was a link to a detailed install procedure in the thread which was for i9100 so the bad kernel flash soft bricked the phone i've restored it and i'm now trying a similar rom
Beaverz said:
I think i might have found the problem, there was a link to a detailed install procedure in the thread which was for i9100 so the bad kernel flash soft bricked the phone i've restored it and i'm now trying a similar rom
Click to expand...
Click to collapse
that's good news
Swyped from my Samsung Galaxy SII
Fixed it the unbrick procedure thats in the g forums worked perectly.
Looks like one must never flash anything on the g version unless it is specifically made for the g version
Beaverz said:
Fixed it the unbrick procedure thats in the g forums worked perectly.
Looks like one must never flash anything on the g version unless it is specifically made for the g version
Click to expand...
Click to collapse
Yeah. Never flash anything not meant for GT I9100G
Swyped from my Samsung Galaxy SII
i9000G Stuck on Samsung Logo
Beaverz said:
I think i might have found the problem, there was a link to a detailed install procedure in the thread which was for i9100 so the bad kernel flash soft bricked the phone i've restored it and i'm now trying a similar rom
Click to expand...
Click to collapse
Hi friend,
My phone is stuck on Samsung Logo. I think I accidently flashed a wrong kernel. Now, I am not able to go to download mode or recovery mode. Can you please guide me how to get my phone working please!!!!
Thanks.
Usb jig.
Sent from the little guy
Hello guys....
I am very thankful to the xda forum and all the members who helped me to get through a serious problem..
Recently I installed 4.3 Leaked version on my GT-I9300 and the ROM proved to be worst ROM of life. So I decided to go back to 4.1.2.
I installed the Stock ROM via Odin but I confronted a serious issue, when I was finished the installation I found that there was no network at all... Samsung's official told me that it is impossible to reverse the Android version...
I had no clue what to do. I flashed many ROMs but no solution at all. My IMIE was also kinda jumbled..
Many guys said it is EFS issue... But it is not EFS issue...
It is all because of different Modem issue.. all you need to do is just install a clean Stock ROM from http://www.sammobile.com/firmwares/2/ and Install the patched modem... you are done..
So here is the solution:
1. Download your desired Stock ROM for your Country from Sammobile...
Link http://www.sammobile.com/firmwares/2/
2. Install the ROM via Odin
3. Root it and Install your favorite recovery.
4. Install the Patched MG4 Modem Zip in Recovery Mode. Link https://www.dropbox.com/s/geispctijpxqjms/Patched_Modem_I9300XXEMG4.zip
You are done....
This problem is all about MODEM version, so I don't think if EFS tricks are involved here.....
Finally credits go to all the XDA Members who put their heart and soul to present all the required guidance for me to be able to downgrade to lower Android Version.. I have only compiled the whole stuff into a single thread....
Thanks,,,
Custom rom from sammobile ???????since when have sam made custom roms .
STOCK ROM yes .
The Downgrading from 4.3 to 4.2.1 and the No Network Issue...
Is well posted in the faqs and guides for those that actually read them .
Sadly most are to lazy /
Sorry for the Wrong Term...
JJEgan said:
Custom rom from sammobile ???????since when have sam made custom roms .
STOCK ROM yes .
The Downgrading from 4.3 to 4.2.1 and the No Network Issue...
Is well posted in the faqs and guides for those that actually read them .
Sadly most are to lazy /
Click to expand...
Click to collapse
Sorry I wrote that mistakenly...... My bad...
Thanks for the guide you save me from a lot of work :good::good:
hugs
First time flashing a Samsung device, are there any risks involved in the above process i.e. wrong country and secondly, @featherknox why is a custom recovery required, is there no way to flash a stock rom straight over another stock rom with out it?
featherknox said:
Hello guys....
I am very thankful to the xda forum and all the members who helped me to get through a serious problem..
Recently I installed 4.3 Leaked version on my GT-I9300 and the ROM proved to be worst ROM of life. So I decided to go back to 4.1.2.
I installed the Stock ROM via Odin but I confronted a serious issue, when I was finished the installation I found that there was no network at all... Samsung's official told me that it is impossible to reverse the Android version...
I had no clue what to do. I flashed many ROMs but no solution at all. My IMIE was also kinda jumbled..
Many guys said it is EFS issue... But it is not EFS issue...
It is all because of different Modem issue.. all you need to do is just install a clean Stock ROM from http://www.sammobile.com/firmwares/2/ and Install the patched modem... you are done..
So here is the solution:
1. Download your desired Stock ROM for your Country from Sammobile...
Link http://www.sammobile.com/firmwares/2/
2. Install the ROM via Odin
3. Root it and Install your favorite recovery.
4. Install the Patched MG4 Modem Zip in Recovery Mode. Link https://www.dropbox.com/s/geispctijpxqjms/Patched_Modem_I9300XXEMG4.zip
You are done....
This problem is all about MODEM version, so I don't think if EFS tricks are involved here.....
Finally credits go to all the XDA Members who put their heart and soul to present all the required guidance for me to be able to downgrade to lower Android Version.. I have only compiled the whole stuff into a single thread....
Thanks,,,
Click to expand...
Click to collapse
I can confirm that this method works. XEMB5 (4.1.2 stock rom) on top of the crappy 4.3 update, rooted it and then installed CWM. flashed the patch modem from the link he gave and the XEMB5 rom is working with network running again. but it seems like the battery is awful, 95% in just 10 minutes? lost 5 percent for that short amount of time -_-
then again, thanks for this!
Battery Drain
thehavoc said:
I can confirm that this method works. XEMB5 (4.1.2 stock rom) on top of the crappy 4.3 update, rooted it and then installed CWM. flashed the patch modem from the link he gave and the XEMB5 rom is working with network running again. but it seems like the battery is awful, 95% in just 10 minutes? lost 5 percent for that short amount of time -_-
then again, thanks for this!
Click to expand...
Click to collapse
Yes after flashing this modem the battery drains so quickly..
I am looking for any solution. Hopefully any developer would come with a good solution.
In battery system I see The Android System draining almost 25 to 30 percent of battery
I had the same issue, but with the help of xda , now everythings normal. but i have a question, with no oficial advances from samsung can i go back to flashing with no danger ?
thx , sorry for my english
Josemonteiro90 said:
I had the same issue, but with the help of xda , now everythings normal. but i have a question, with no oficial advances from samsung can i go back to flashing with no danger ?
thx , sorry for my english
Click to expand...
Click to collapse
My problem is little different. I can flash any ROM via Odin[DO NOT FORGET TO CHARGE YOUR MOBILE ABOVE 80% battery level!]:
1. Goto recovery by pressing "vo upl+home+power" release when you Samsung's bootloader.
2. Do factory reset/wipe everything.
3. Remove battery for 10secs. Then put it back.
4. Now press "vol down+home+power" to bring it into download mode. Then follow odin flashing procedure. It will work for any Samsung rom. No need to intall any custum roms.
Now going to my problems:
A. My s3 shuts down when it's idle.
B. Bluetooth button does not work. It tries to go to ON position but goes back OFF after 2/3 sec.
After downgrading from earlier 4.3 [SWC] I have even upgraded it with latest 4.1.2 xxemh4 but no luck!
Every thing works network, wi-fi etc. except above two problems!
Help me please!!
I FOUND SOMETHING, WHEN I DO *#1234* IT SAYS CSC: UNKNOWN though my network is ok and wi-fi works fine. Lemme try patching CSC as featherknox suggested!
@featherknox, But your patched modem can not be flashed in recovery[stock] mode as it says "Signature verification failed". HELP ME WHAT I SHOULD DO?
problem after flashing rom
why when i flashing that rom to downgrade from 4.3 to 4.2.1(ROM from sammobile) it stuck at samsung logo and always repeat the samsung logo. help me please. thanks
wannn97 said:
why when i flashing that rom to downgrade from 4.3 to 4.2.1(ROM from sammobile) it stuck at samsung logo and always repeat the samsung logo. help me please. thanks
Click to expand...
Click to collapse
first of all 4.2.1 or 4.1.2 ?
secondly have you wiped data/cache/dalvik cache and format system ?
Third did you try flashing any other supported kernels for your current android version ?
Galaxy S3 Updating causes Emergency Calls Only
Hi People i want to share my problem here which im facing from many days , I have updated My Galaxy S3 from Android 4.0 ICS to Offical Android 4.1.2 Jelly Bean for my country which i have downloaded from Sammobile via Odin After updating my phone im facing Emergency Calls only problem and also lost my IMEI which changed like 0049 i have searched many time on google nut cannot find a perfect solution for it plz any one help me it will be appriciatiable Thanx
Go read the efs thread in general forum, stickies.
Sent from my GT-I9300 using Tapatalk
Unknown baseband and null IMEI on samsung gs3 (I9300) after downgrading from 4.3
Dear All, pls give me a solution for my problem.
i have intl version of GS3 (I9300), recently i have updated my GS3 to 4.3 via ODIN then i have rooted my mobile to install slimbean rom. all was well until yesterday. but i decided to go back to 4.1.2 and flashed official ROM with baseband (MG4). from then onwards my mobile is showing sim not found, unknown baseband and null imei.
can anyone help me in solving this problem. thousand thanks in advance.
rajugsg2702 said:
Dear All, pls give me a solution for my problem.
i have intl version of GS3 (I9300), recently i have updated my GS3 to 4.3 via ODIN then i have rooted my mobile to install slimbean rom. all was well until yesterday. but i decided to go back to 4.1.2 and flashed official ROM with baseband (MG4). from then onwards my mobile is showing sim not found, unknown baseband and null imei.
can anyone help me in solving this problem. thousand thanks in advance.
Click to expand...
Click to collapse
Read my signature for your answer.
Sent from my GT-I9300 using Tapatalk
i will test this tuto, because i have the same problem , the generic imei 0049 etc.. i dont have the efs backup , i hope this make my s3 funcional
sorry for my ingles!
Edit
Not working for me.... any ideas?
boomboomer said:
Read my signature for your answer.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
i am still waiting for solution to my problem. can anyone answer pls.
regards
rajugsg2702 said:
i am still waiting for solution to my problem. can anyone answer pls.
regards
Click to expand...
Click to collapse
Have You tried this solution by featherknox ??????
1. Download your desired Stock ROM for your Country from Sammobile...
Link http://www.sammobile.com/firmwares/2/
2. Install the ROM via Odin
3. Root it and Install your favorite recovery.
4. Install the Patched MG4 Modem Zip in Recovery Mode. Link https://www.dropbox.com/s/geispctijp...9300XXEMG4.zip
You are done....
plz try this again and tell me if this works...
Muhammad Ameen said:
Have You tried this solution by featherknox ??????
1. Download your desired Stock ROM for your Country from Sammobile...
2. Install the ROM via Odin
3. Root it and Install your favorite recovery.
4. Install the Patched MG4 Modem Zip in Recovery Mode.
You are done....
plz try this again and tell me if this works...
Click to expand...
Click to collapse
it didnt work for me. i did the sameway as u have mentioned, i have even read featherknox posts in this forum but failed to bring back baseband version. pls suggest me what next
rajugsg2702 said:
it didnt work for me. i did the sameway as u have mentioned, i have even read featherknox posts in this forum but failed to bring back baseband version. pls suggest me what next
Click to expand...
Click to collapse
Read the faqs and guides or take to a service centre .
I have Samsung Galaxy S Duos 2 S7562
I was running rooted stock rom S7562XXBMJ1 (INDIA)
Few days ago, suddenly "Process System Not Responding" Msg popped up & since then device restarts automatically.
(I guess its because of the sql debugger app I installed)
I wiped dalvik-cache followed by fix permissions& did hard-reset from recovery mode.. but still I get the msg
After doing hard reset:
BaseBand: S7562DDBMJ1
Kernel: 3.08-1260195
Android 4.0.4
So I thought may be flashing custom ROM will fix the problem.
I rooted & installed CWM recovery
My Question is Can I flash KyleOpen 3.4.1 on my mobile directly .. (please take country(INDIA) & baseband into consideration)
Below thread says { Before installing KyleOpen ROM, make sure you are running S7562XXBMD6 as base ROM. }
http://forum.xda-developers.com/showthread.php?t=2087177
Do I need to flash to this ROM(XXBMD6) Before installing KyleOpen (for India) ?
Will I get network problems??
Thanks In Advance!
You should be fine. The main reason they said that in the OP was to make sure you are on the right firmware and baseband, but if you search that thread with the word: India, it has some posts saying that as long as you have the newer (4.0.4+) radio/baseband/modems then it'll work for you. Worst case scenario - just find the firmware for your original carrier and flash via Odin.
es0tericcha0s said:
You should be fine. The main reason they said that in the OP was to make sure you are on the right firmware and baseband, but if you search that thread with the word: India, it has some posts saying that as long as you have the newer (4.0.4+) radio/baseband/modems then it'll work for you. Worst case scenario - just find the firmware for your original carrier and flash via Odin.
Click to expand...
Click to collapse
Dit it!
Everything Works Fine!
Thank You!
Trushant said:
I have Samsung Galaxy S Duos 2 S7562
I was running rooted stock rom S7562XXBMJ1 (INDIA)
Few days ago, suddenly "Process System Not Responding" Msg popped up & since then device restarts automatically.
(I guess its because of the sql debugger app I installed)
I wiped dalvik-cache followed by fix permissions& did hard-reset from recovery mode.. but still I get the msg
After doing hard reset:
BaseBand: S7562DDBMJ1
Kernel: 3.08-1260195
Android 4.0.4
So I thought may be flashing custom ROM will fix the problem.
I rooted & installed CWM recovery
My Question is Can I flash KyleOpen 3.4.1 on my mobile directly .. (please take country(INDIA) & baseband into consideration)
Below thread says { Before installing KyleOpen ROM, make sure you are running S7562XXBMD6 as base ROM. }
http://forum.xda-developers.com/showthread.php?t=2087177
Do I need to flash to this ROM(XXBMD6) Before installing KyleOpen (for India) ?
Will I get network problems??
Thanks In Advance!
Click to expand...
Click to collapse
same thing happen with me few days ago in my s duos
when I flash Same rom with recovery that problem gone
Vaibhav Chauhan said:
same thing happen with me few days ago in my s duos
when I flash Same rom with recovery that problem gone
Click to expand...
Click to collapse
Can you give me the link of original stock rom?
Trushant said:
Can you give me the link of original stock rom?
Click to expand...
Click to collapse
but I was on custom rom you can flash your stock from via odin
thats really so easy? Only flas per odin. Thx.