:crying:[Q] HELP! Galaxy S II Frozen at startup screen - Galaxy S II Q&A, Help & Troubleshooting

:crying: Help yesterday i rooted it with CF ( i think it was the wrong one) used ODIN thing ans whatever it show passed reboot and froze at startup with yellow triangle i tried Doing anything from Vol up / Vol down + home + power thing Everything !!! Please help me :crying: i dont want to buy again ( no warranty because rooted ) and doesnt know how to unroot without vol thing HELP!!!! :crying:

sounds similar to what happened to me yesterday - take a look here: http://forum.xda-developers.com/showthread.php?t=1849603
Also, what is your exact model? Don't worry, it's not the end of the world!
I fixed it by re flashing my original stock firmware.

Version
Samsung galaxy S II GT I9100G

Try flashing your stock firmware and see if it works.

Carlover1998 said:
Try flashing your stock firmware and see if it works.
Click to expand...
Click to collapse
hmm but i dont really know how to reflash because just bought last week:crying:

Yeah straight in without reading the rules/guides or doing a search.
Bet you joined here and 2 minutes later harping on about your faulty phone......lol
Sent from my GT-I9100 using xda premium

Centimeter said:
hmm but i dont really know how to reflash because just bought last week:crying:
Click to expand...
Click to collapse
Ok so basically I assume you know how to use Odin and what it is? You will need the phone's original firmware, which you can then flash to your phone via odin using the 'PDA' button. All of this will be done while your phone is connected via USB to your computer, and make sure it is in 'Download Mode' (vol down + home + power) when flashing it.

still crying
Carlover1998 said:
Ok so basically I assume you know how to use Odin and what it is? You will need the phone's original firmware, which you can then flash to your phone via odin using the 'PDA' button. All of this will be done while your phone is connected via USB to your computer, and make sure it is in 'Download Mode' (vol down + home + power) when flashing it.
Click to expand...
Click to collapse
yes then BTW thungerling is right i craeted this account 2 mins ago without reading rules and report my faulty phone it shows downloading like rooting process then what do i need to do

Centimeter said:
yes then BTW thungerling is right i craeted this account 2 mins ago without reading rules and report my faulty phone it shows downloading like rooting process then what do i need to do
Click to expand...
Click to collapse
Could have at least read the rules mate, and/or seen the xda 'noob' vid, search, but I understand your urge to fix your precious phone.
Anyway, I would go about it like I said above:
- Download original firmware (.tar.md5 file)
- Open Up Odin, then click on 'PDA' and select the original firmware file
- Make sure 'Auto Reboot' and 'F. Reset Time' are CHECKED
- Boot into Download Mode on your phone
- Connect the phone to your computer
- On Odin, press 'Start'
- Wait for it to finish flashing
After that, your phone should reboot automatically and work again

Centimeter said:
:crying: Help yesterday i rooted it with CF ( i think it was the wrong one) used ODIN thing ans whatever it show passed reboot and froze at startup with yellow triangle i tried Doing anything from Vol up / Vol down + home + power thing Everything !!! Please help me :crying: i dont want to buy again ( no warranty because rooted ) and doesnt know how to unroot without vol thing HELP!!!! :crying:
Click to expand...
Click to collapse
Stop panicing! That just makes everything worse
First of all; have you got a USB download-mode jig? If yes, use that. That will basically force the device into Odin mode, so you can re-do the flash
If you don't have one, then buy one from:
eBay
Amazon
mobiletechvideos(.com)
or get the stuff, make your own
Once you have any type of Jig/Dongle, whatever you want to call it, I call it a jig, plug it into the phone. Unplug the jig and plug the phone (via USB cable) into the computer, start Odin and flash stock firmware (Which ever you want, GB or ICS)
Once you've done that, flash any type of C.-recovery and then you can (carefully) flash a different ROM. I would recommend using recovery-programs anyway, as they esnure that everything goes to plan, Odin just flashes away and checks everything AFTERWARDS, CWM checks before AND after
Well, anyway, hope I could help you!

Thanks
Carlover1998 said:
Could have at least read the rules mate, and/or seen the xda 'noob' vid, search, but I understand your urge to fix your precious phone.
Anyway, I would go about it like I said above:
- Download original firmware (.tar.md5 file)
- Open Up Odin, then click on 'PDA' and select the original firmware file
- Make sure 'Auto Reboot' and 'F. Reset Time' are CHECKED
- Boot into Download Mode on your phone
- Connect the phone to your computer
- On Odin, press 'Start'
- Wait for it to finish flashing
After that, your phone should reboot automatically and work again
Click to expand...
Click to collapse
downloading new firmware I9300 and i will install ill thank you ok your right its not the end of the world

Centimeter said:
downloading new firmware I9300 and i will install ill thank you ok your right its not the end of the world
Click to expand...
Click to collapse
Hold on, Hold on, i9300 is the Galaxy S III! It's not the end of the world at the moment, but it will be if you flash something for an i9300!
I appreciate the thanks too - but you need your original firmware for i9100G (your phone)! NOT i9300!

Carlover1998 said:
Could have at least read the rules mate, and/or seen the xda 'noob' vid, search, but I understand your urge to fix your precious phone.
Anyway, I would go about it like I said above:
- Download original firmware (.tar.md5 file)
- Open Up Odin, then click on 'PDA' and select the original firmware file
- Make sure 'Auto Reboot' and 'F. Reset Time' are CHECKED
- Boot into Download Mode on your phone
- Connect the phone to your computer
- On Odin, press 'Start'
- Wait for it to finish flashing
After that, your phone should reboot automatically and work again
Click to expand...
Click to collapse
btw why i cant volume up + home + Power button if i can it will be so east that i just can reset

Centimeter said:
btw why i cant volume up + home + Power button if i can it will be so east that i just can reset
Click to expand...
Click to collapse
Resetting won't help anyways since you flashed for the wrong device. You need to go in the download mode which is power + vol. down + home button, then via Odin flash your firmware.
Sent from my GT-I9100 using Tapatalk 2

Carlover1998 said:
Hold on, Hold on, i9300 is the Galaxy S III! It's not the end of the world at the moment, but it will be if you flash something for an i9300!
I appreciate the thanks too - but you need your original firmware for i9100G (your phone)! NOT i9300!
Click to expand...
Click to collapse
dude where can i actually get to download this firmware

Centimeter said:
dude where can i actually get to download this firmware
Click to expand...
Click to collapse
Start here: [GUIDE] Fix an unflashable or soft bricked I9100G

theunderling said:
Yeah straight in without reading the rules/guides or doing a search.
Bet you joined here and 2 minutes later harping on about your faulty phone......lol
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Stop flaming, it's against the rules ^^

Related

Home button broke,How to get into Recovery?

evening
about to rma my sgs2 but stuck in a bootloop trying to flash via mobile odin
any help?
Use a usb jig to get into download mode and then flash via odin.
Cheers
Ades
cheers bought a jig today, its in odin mode saying downloading, do i now put my usb
sutty86 said:
cheers bought a jig today, its in odin mode saying downloading, do i now put my usb
Click to expand...
Click to collapse
Stock rom post then reset counter if need be .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
cheers just need to find my usb lead now
adrian5800 said:
Use a usb jig to get into download mode and then flash via odin.
Cheers
Ades
Click to expand...
Click to collapse
Or he can just download ANY of the ROM managers and use the "boot into download mode" option trololol...
gr4ndm4st3r_bl4ck said:
Or he can just download ANY of the ROM managers and use the "boot into download mode" option trololol...
Click to expand...
Click to collapse
he'll need a custom kernel for that, jig is much safer
gr4ndm4st3r_bl4ck said:
Or he can just download ANY of the ROM managers and use the "boot into download mode" option trololol...
Click to expand...
Click to collapse
Yeah that'd work. He's in a bootloop...
guys still having dramas managed to get hold of a windows pc, got odin loaded
downloading 2 stock orange firmwares from intratechs thread and also the old litning
still stuck in bootloop!!!
please no phone now for 4 days!
sutty86 said:
guys still having dramas managed to get hold of a windows pc, got odin loaded
downloading 2 stock orange firmwares from intratechs thread and also the old litning
still stuck in bootloop!!!
please no phone now for 4 days!
Click to expand...
Click to collapse
Look , i had the bootloop once. I tried to power down my device, but it wouldn't work. Took out the battery and it powered on itself - bootloop. Try holding Volume Up + Home + Power buttons to get into recovery mode and then clear data/cache. I remember holding the buttons for 10 seconds before it actually rebooted to recovery
But if you read the heading of this thread gr4ndm4st3r_bl4ck, it says the home button is broke....
ultramag69 said:
But if you read the heading of this thread gr4ndm4st3r_bl4ck, it says the home button is broke....
Click to expand...
Click to collapse
I'm not sure his button is really broke , cuz he didn't mention it anywhere in his post , just in the heading... Which makes no sense, who does any kind of flashing if their hardware button is broke... If it really is , then it's his fault for not taking it to repair first...

Pls help I m in panic

I was trying to update-upgrade my S2 via Kies (everything up to date) to ICS, it got stuck at 0% an error message came up said pull out battery and connect again. Did it but nothing. A yellow triangle with black ! inbetween of a phone and a PC only appears. Tried Hard reset but nothing. can't connect to kies, can;t do anything...
Tried to look if there were is another thread like this but couldnt find.
Im a newbie in Android and as you can see I am in PANIC
any help appreciated.
is brick.you need jig usb to put in download mode for flash.
Inviato dal mio GT-I9100 usando Tapatalk
Thx for the quick reply. But how do I do-find it???
Did I do sth wrong? My fault?
You can buy it at ebay.
yeah looked it up. any other quicker solution isnt there?
volakas said:
Thx for the quick reply. But how do I do-find it???
Did I do sth wrong? My fault?
Click to expand...
Click to collapse
I would say first try getting into download mode(by pressing volume up & the power button simultaneously). After that, connect your phone to your PC,run "Odin 1.85"(just google that sentence, you will get it), after that use odin to flash a stock samsung ROM to your phone.
download this stock ROM to be used with odin :
http://skywanker.net/download/downl...9100_XEO_I9100XWLP8_I9100OXALPS_I9100XXLPS.7z
the exact details on how to flash the link I gave above to your phone is on this link:
http://forum.xda-developers.com/showthread.php?t=1075278
Good luck!!
Tried Vol up and power button but nth happend. Still Yellow triangle and black question mark....
For download mode its volume down home and power key.Try this if it goes in to download mode then follow the rest of the steps from the above post
volakas said:
Tried Vol up and power button but nth happend. Still Yellow triangle and black question mark....
Click to expand...
Click to collapse
You need to press the Home button as well.
I'd remove batteries, wait for at least 5 s. Then try entering Download mode with
(Vol Down Home, Power)
If it still won't work then you'd need to get a USB jig as noted in previous posts.
And no it is not your fault, KIES is not a very good piece of software.
Elythor said:
You need to press the Home button as well.
I'd remove batteries, wait for at least 5 s. Then try entering Download mode with
(Vol Down Home, Power)
If it still won't work then you'd need to get a USB jig as noted in previous posts.
And no it is not your fault, KIES is not a very good piece of software.
Click to expand...
Click to collapse
Tried that as well but nothing..... will go the store I bought it to see if they want any fees or else I wil order the jig and wait 3 weeks for it to arrive
volakas said:
A yellow triangle with black ! inbetween of a phone and a PC only appears.
Click to expand...
Click to collapse
Are you still getting this screen? This is a forced download mode. You can try an Odin flash from here.
apparently you are new to this so..... here it goes
1: first check you got i9100 not i9100G
2: kies told you to remove and reconnect blaa blaa so it can restore the error. if you cant manage to fix it, than easy method is like post above said. use odin.
3: read about how to use odin, close kies, download stock ROM (checkfus / sammobile ) and flash, it will be fixed.
4: no need for jig at the moment.
if ur in download mode jus use odin an c if it recognizes,yes means flash up....by the way kies is safe
Well i think i ve got I9100G, can i still use Odin?????
YES,
though search threads in this section :http://forum.xda-developers.com/forumdisplay.php?f=1550
cant you make sure or still think it is "G"
Yes it is MODEL:GT-I9100G
volakas said:
Yes it is MODEL:GT-I9100G
Click to expand...
Click to collapse
G section of the forum .
i9100 firmware will brick a G model .
jje
Well i opened ODIN put an I9100G Rom as PDA and pressed start but after half an hour it is still <ID:0/008> SetupConnection..
It's in forced download mode, it should still be coming up "COM:x" in ODIN right? You should be able to flash a recovery package from there. It should take 5 minutes at the most, not 30.
where did you get ROM from...what type of file????

[Q] My Sgh i777 can't enter in download mode eighter in recovery mode

Well, my phone cant enter in this modes, but the problem its that also cant enter to the system, i can only see the logo of samsung and then the screen turn off, I dont know what to do, because I cant use the odin because I cant enter in download mode, I dont know if there is a button to hard reset the phone. I was trying to put a rom of ics but i believe that the firmware was wrong for my phone. please help me.
Sounds like you flashed something in Odin that was not for your phone. You probably need to get it J-tagged to get it fixed. Check out mobiletechvideos.com
It's like $50 dollars for the service, they'll J-tag your phone and flash the correct bootloader.
Sent from my SPH-D710 using xda premium
Mattix724 said:
Sounds like you flashed something in Odin that was not for your phone. You probably need to get it J-tagged to get it fixed. Check out mobiletechvideos.com
It's like $50 dollars for the service, they'll J-tag your phone and flash the correct bootloader.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Thanks for your fast answer Mattix but you don't know another way to fix it, because I'm not in United States then its very dificult ( and take to much time ) to send my phone.
How did you try to get into download and recovery. Be as specific as possible
JoseDavid said:
Thanks for your fast answer Mattix but you don't know another way to fix it, because I'm not in United States then its very dificult ( and take to much time ) to send my phone.
Click to expand...
Click to collapse
Since the phone will turn on, and initiate the boot process, it should be able to recover it yourself. Jtag is for true hard bricks, which your phone is NOT.
Please give a full description of what led up to your problem. What firmware was on the phone before, what did you attempt to flash, and anything that you can think of that would provide any additional information for trouble shooting. Also, a link to the firmware you tried to flash.
122ninjas said:
How did you try to get into download and recovery. Be as specific as possible
Click to expand...
Click to collapse
Well, when I try to get into recovery I press the buttons of power and up and down of volume, and the same way to get into download but in this time with the phone connected in the pc. When I try to get into download mode, I can't see neither the samsung logo
JoseDavid said:
Well, when I try to get into recovery I press the buttons of power and up and down of volume, and the same way to get into download but in this time with the phone connected in the pc. When I try to get into download mode, I can't see neither the samsung logo
Click to expand...
Click to collapse
To get the SGH-I777 into download mode, continuously hold down both volume buttons (but not the power button) while plugging in the usb cable.
Can you answer my previous question?
creepyncrawly said:
Since the phone will turn on, and initiate the boot process, it should be able to recover it yourself. Jtag is for true hard bricks, which your phone is NOT.
Please give a full description of what led up to your problem. What firmware was on the phone before, what did you attempt to flash, and anything that you can think of that would provide any additional information for trouble shooting. Also, a link to the firmware you tried to flash.
Click to expand...
Click to collapse
I had a rom of supernexus for jelly bean, this rom run very fine, but i was trying to put the modem of one rom the ics, and in this moment the problems started, but i could enter in download mode and try to flash with a rom of ics, the topic its in spanish, and I couldn't read well because the rom its for s2, they don't specified the model sgh i777 :S, now I downloaded the rom what i need but i can enter in the download mode, I cant put the link because I'm new here
creepyncrawly said:
To get the SGH-I777 into download mode, continuously hold down both volume buttons (but not the power button) while plugging in the usb cable.
Can you answer my previous question?
Click to expand...
Click to collapse
I'm doing the try right now without pressing the power button and then my phone screen display "Forcerd Upload by key pressing"
that help??
JoseDavid said:
I cant put the link because I'm new here
Click to expand...
Click to collapse
I would like to see what you flashed, and if it contains the secondary bootloader for a different device. Just type in the link and I can cut and paste it.
creepyncrawly said:
I would like to see what you flashed, and if it contains the secondary bootloader for a different device. Just type in the link and I can cut and paste it.
Click to expand...
Click to collapse
SamMobile.com_Android_4.0.1_CUSTOM.rar
this is the name of the rom I downloaded,maybe you can google it,
http://drblackberry.com.ve/?p=7343&replytocom= 880, this is the page
JoseDavid said:
SamMobile.com_Android_4.0.1_CUSTOM.rar
this is the name of the rom I downloaded,maybe you can google it,
http://drblackberry.com.ve/?p=7343&replytocom= 880, this is the page
Click to expand...
Click to collapse
Looks like he loaded bootloaders.
122ninjas said:
Looks like he loaded bootloaders.
Click to expand...
Click to collapse
Yes one step in the topic was put a bootloaders, right now I'm in Forced Upload by key pressing, I read in another site that it is something like download mode.
JoseDavid said:
Yes one step in the topic was put a bootloaders, right now I'm in Forced Upload by key pressing, I read in another site that it is something like download mode.
Click to expand...
Click to collapse
Nobody knows what can I do in that moment?
I put my i777 on download mode by removing the battery and putting it back. Hold the volume button down and connect the USB charger wait for the buttons to flash and disconnect the charger while holding the volume down button. If that doesn't work nothing will.
Sent from my SGH-I777 using Tapatalk 2
JoseDavid said:
Nobody knows what can I do in that moment?
Click to expand...
Click to collapse
Try this:
Pull the battery and leave it out.
Hold down volume button and plug in the USB cable. (PC will supply the power)
This should boot the phone into download mode.
If the above works to get into download mode, do the following:
Download the I777 secondary bootloader .tar from the Download Repository. See the link in my signature.
Unplug the phone (to shut off)
Open Odin v1.85 on screen of pc.
Enter download mode as above.
When connected put the secondary bootloader in the PDA slot in Odin and flash.
creepyncrawly said:
Try this:
Pull the battery and leave it out.
Hold down volume button and plug in the USB cable. (PC will supply the power)
This should boot the phone into download mode.
If the above works to get into download mode, do the following:
Download the I777 secondary bootloader .tar from the Download Repository. See the link in my signature.
Unplug the phone (to shut off)
Open Odin v1.85 on screen of pc.
Enter download mode as above.
When connected put the secondary bootloader in the PDA slot in Odin and flash.
Click to expand...
Click to collapse
Hey you all thanks for everything, I could fix the phone,
I could enter in the download mode and then install the secondary bootloader like creepyncrawly says to do,
Thanks :victory::silly:
JoseDavid said:
Hey you all thanks for everything, I could fix the phone,
I could enter in the download mode and then install the secondary bootloader like creepyncrawly says to do,
Thanks :victory::silly:
Click to expand...
Click to collapse
Glad u got it fixed! In the future only download roms from this Site and never flash bootloaders.
Sent from Team Pirate Headquarters
help please
I just recently got my SGS2 (i777) and decided to root it. Unfortunately I got the root from another site (dumb move) and today the phone went into a reboot loop. I can connect it and get it into download mode, but everytime I try to flash back to the stock rom, or anything else (bootloader) Odin says connection failed, unable to open COM Port. I know it connects because it installs the drivers for the phone. Can someone MUCH smarter that me assist with this one?
jck203 said:
I just recently got my SGS2 (i777) and decided to root it. Unfortunately I got the root from another site (dumb move) and today the phone went into a reboot loop. I can connect it and get it into download mode, but everytime I try to flash back to the stock rom, or anything else (bootloader) Odin says connection failed, unable to open COM Port. I know it connects because it installs the drivers for the phone. Can someone MUCH smarter that me assist with this one?
Click to expand...
Click to collapse
can you interrupt the bootloop by trying to get to recovery (holding VOL UP + VOL DOWN + POWER until recovery menu appears) and then go to backup-restore and restore a backup? That's what I would try. IF that does not work, I would reinstall the drivers for andoid on your pc --even though you had them working (presumably) once before. After reinstalling the drivers then odin should (may!) see the phone and work.
good luck

Need Help! SGS3 stuck at boot logo.

Hey,
I have a Samsung galaxy s3 GT-i9300 that wont boot up (it only shows the samsung logo).
Ive rebooted, removed the battery but no success. The only thing that works is download mode. It is still stock (not rooted).
I know theres some similar threads already however theyre rooted with custom roms. Any suggestions? What can I do?
Nath
ronin201085 said:
Hey,
I have a Samsung galaxy s3 GT-i9300 that wont boot up (it only shows the samsung logo).
Ive rebooted, removed the battery but no success. The only thing that works is download mode. It is still stock (not rooted).
I know theres some similar threads already however theyre rooted with custom roms. Any suggestions? What can I do?
Nath
Click to expand...
Click to collapse
You could try reflashing your firmware via Odin, you can download it from Sammobile quite easily
NewAussiefromCanada said:
You could try reflashing your firmware via Odin, you can download it from Sammobile quite easily
Click to expand...
Click to collapse
The only things stopping me is that the handset is still completely stock and under warranty. I dont want to try it and risk losing that warranty...
Try go into recovery and factory reset
Sent from my GT-I9300 using xda app-developers app
Arsaw said:
Try go into recovery and factory reset
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
How can I get in to recovery? Power+VolDown+Home only put me in download mode with no other options.
Hi recovery is different. Power+home+vol up
Sent from my GT-I9300 using xda premium
madcable said:
Hi recovery is different. Power+home+vol up
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks, tried it, failed.
I turned teh phone off, held power+home+vol up until I saw the logo and then it didnt go any further.
ronin201085 said:
The only things stopping me is that the handset is still completely stock and under warranty. I dont want to try it and risk losing that warranty...
Click to expand...
Click to collapse
If you flash a official release from sammobile it should not increase your binary count, thus leaving your warranty intact. It is when you root or flash a custom Rom your binary will increase.
Worst case you need to use triangleaway if counter increases
Sent from my Jelly Omega SIII using XDA App
If anyone's interested, I had to return the phone under warranty where they replaced the main PBA.
The combination to get to recovery is this (for future reference)
Vol-up + home + power button. Once galaxy s 3 logo pops up quickly let go of the power button and hold in again then let all three go once in recovery.
Sent from my GT-I9300 using xda premium
please help meeeee
i did every thing..wipe my data ,factory rest it,wipe every thing but still my s3 is stuck on boot logo...i rooted it then i opend chainfire3d and updaate it ..after that all this happend..and i am also noob
jehanzaib1 said:
i did every thing..wipe my data ,factory rest it,wipe every thing but still my s3 is stuck on boot logo...i rooted it then i opend chainfire3d and updaate it ..after that all this happend..and i am also noob
Click to expand...
Click to collapse
I had a problem once where my phone wouldn't get past the Samsung boot logo all I did was remove the external SD card tried again and it worked! Try it?
Sent from my GT-I9300 using xda premium
jehanzaib1 said:
i did every thing..wipe my data ,factory rest it,wipe every thing but still my s3 is stuck on boot logo...i rooted it then i opend chainfire3d and updaate it ..after that all this happend..and i am also noob
Click to expand...
Click to collapse
It's forbidden here to spoon feed people but I think I'll help you since I've experienced that myself.
Check your inbox for my PM.
Help wanted also.
EtienneBordeaux said:
It's forbidden here to spoon feed people but I think I'll help you since I've experienced that myself.
Check your inbox for my PM.
Click to expand...
Click to collapse
PM me also?
You guy´s soft bricked your phones thats why u dont get any where re-flashing, but heres something worth trying without risking anything!!
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
JUST GET YOUR SAMMY STOCK ROM FIRST FROM THEIR SITE
Use this Odin version >android.gs/download-odin-1-85/.
Above the country code and you can know the three-letter code which applies to your country. Now look for the date of release and select an appropriate update release for your phone.
Step-4 Rebooting
Reboot by holding Home, Volume Down and Power buttons. Remember you need to hold the Volume Down button and not the Volume Up button as in the first step. You will get into the download mode. So, you phone is now ready to get the firmware via USB.
The phone will flash a warning about the dangers involved. You should not worry as you are putting the firmware back on the phone.
On the computer, now unzip the Samsung firmware folder you downloaded from the official website. Now extract the .md5 file.
Now open Odin, select.md5 file in the 'PDA' section of Odin.
Make sure that Auto Reboot and F. Reset Time is ticked.
Connect your Galaxy S3 to your computer via the USB lead. Odin will automatically detect the phone and a pop-up message will show. Now start the process of transferring the file.
Step-5
Wait for the file to download. Odin will show 'PASS!' in the box once the transfer is successful. And the phone will then, reboot.
If it hangs on the Samsung logo, don't worry reboot into the recovery mode by holding down Home, Volume Up and Power buttons. Wipe the data/factory reset and reboot.
This will in all chances bring your phone to a functioning mode. Sign in and start working.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The extent of you phone being bricked may vary, but the symptoms are often the same -- a reboot loop, switching itself off after the Samsung logo or never getting into the operating system. As long as you can get into the recovery mode, there is hope to recover the Samsung Galaxy S3,
no success
Hi guys,
your solutions are great but in my case it didnt help at all.
My phone still stucks at logo. Only download mode is possible, but odin wanted a pit file always when i tried to download the sammy firmware rom. After all i even downloaded the pit file GT-I9300_mx_20120329.pit. But even with the pitfile and Re-Partitioning it didnt function at all.
My SGS3 T-Mobile can not start at all.
PLEASE HELP ME, i am helpless.
with best regards
ghostworm
spoonymoon said:
You guy´s soft bricked your phones thats why u dont get any where re-flashing, but heres something worth trying without risking anything!!
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
JUST GET YOUR SAMMY STOCK ROM FIRST FROM THEIR SITE
Use this Odin version >android.gs/download-odin-1-85/.
Above the country code and you can know the three-letter code which applies to your country. Now look for the date of release and select an appropriate update release for your phone.
Step-4 Rebooting
Reboot by holding Home, Volume Down and Power buttons. Remember you need to hold the Volume Down button and not the Volume Up button as in the first step. You will get into the download mode. So, you phone is now ready to get the firmware via USB.
The phone will flash a warning about the dangers involved. You should not worry as you are putting the firmware back on the phone.
On the computer, now unzip the Samsung firmware folder you downloaded from the official website. Now extract the .md5 file.
Now open Odin, select.md5 file in the 'PDA' section of Odin.
Make sure that Auto Reboot and F. Reset Time is ticked.
Connect your Galaxy S3 to your computer via the USB lead. Odin will automatically detect the phone and a pop-up message will show. Now start the process of transferring the file.
Step-5
Wait for the file to download. Odin will show 'PASS!' in the box once the transfer is successful. And the phone will then, reboot.
If it hangs on the Samsung logo, don't worry reboot into the recovery mode by holding down Home, Volume Up and Power buttons. Wipe the data/factory reset and reboot.
This will in all chances bring your phone to a functioning mode. Sign in and start working.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The extent of you phone being bricked may vary, but the symptoms are often the same -- a reboot loop, switching itself off after the Samsung logo or never getting into the operating system. As long as you can get into the recovery mode, there is hope to recover the Samsung Galaxy S3,
Click to expand...
Click to collapse
ghostworm said:
Hi guys,
your solutions are great but in my case it didnt help at all.
My phone still stucks at logo. Only download mode is possible, but odin wanted a pit file always when i tried to download the sammy firmware rom. After all i even downloaded the pit file GT-I9300_mx_20120329.pit. But even with the pitfile and Re-Partitioning it didnt function at all.
My SGS3 T-Mobile can not start at all.
PLEASE HELP ME, i am helpless.
with best regards
ghostworm
Click to expand...
Click to collapse
___________________________________________________________________________
If you using Jelly bean then Chainfire 3D not compatible you will need to wipe and reflash
bunglebp said:
___________________________________________________________________________
If you using Jelly bean then Chainfire 3D not compatible you will need to wipe and reflash
Click to expand...
Click to collapse
i am not able to get into the wipe mode of the phone with 3 finger button mode, only download mode is available.
is there a special procedure how to wipe and reflash with odin or any software?
If there is a tutorial link it would be great to send it to me.
Many thanks in advance.
ghostworm
ghostworm said:
i am not able to get into the wipe mode of the phone with 3 finger button mode, only download mode is available.
is there a special procedure how to wipe and reflash with odin or any software?
If there is a tutorial link it would be great to send it to me.
Many thanks in advance.
ghostworm
Click to expand...
Click to collapse
_________________________________________________________________
This is worth a try - ROM Flash using ODIN and Download Mode: http://forum.xda-developers.com/showthread.php?t=1835931
bunglebp said:
_________________________________________________________________
This is worth a try - ROM Flash using ODIN and Download Mode: http://forum.xda-developers.com/showthread.php?t=1835931
Click to expand...
Click to collapse
i will try it out. First i have to download 859MB !!!
I will tell you if it was successfull.
Thank you very much

samsung galaxy s2 software bricked ?

I have used the tutorial for rooting my phone, it goes through the first stage on pda flashing an insecure rom, phone reboots and i have the yellow triangle, then the phone just locks on black screen, tried running the easy root software, it connects to the phone then stops.
I can enter recovery mode and tried a different kernal but still same problem, Thanks in advance for any help.
Jaycee
jayceemcg said:
I have used the tutorial for rooting my phone, it goes through the first stage on pda flashing an insecure rom, phone reboots and i have the yellow triangle, then the phone just locks on black screen, tried running the easy root software, it connects to the phone then stops.
I can enter recovery mode and tried a different kernal but still same problem, Thanks in advance for any help.
Jaycee
Click to expand...
Click to collapse
reflash stock via odin (get firmware at sammobile.com)
and... dont try to root it again, for sure u screwed up cuz u didnt read enough, i dunno
C4SCA said:
reflash stock via odin (get firmware at sammobile.com)
and... dont try to root it again, for sure u screwed up cuz u didnt read enough, i dunno
Click to expand...
Click to collapse
Couldnt see a flash file for uk s2 on there, but thanks for the info
jayceemcg said:
Couldnt see a flash file for uk s2 on there, but thanks for the info
Click to expand...
Click to collapse
there u go, jellybean; http://www.hotfile.com/dl/200899346/20a7989/I9100XWLSN_I9100OXXLS8_NEE.zip.html
thanks for the link, being a newbie do i use odin and just select pda again ?
jayceemcg said:
thanks for the link, being a newbie do i use odin and just select pda again ?
Click to expand...
Click to collapse
download, unzip the downloaded file until u get a tar.md5 file
got o recovery and wipe data/factory reset (and format system, preload, data and cache if on a custom recovery, check under mount and storage)
reboot to download mode, plug your phone
open odin, click pda, select the tar.md5 file, hit start and wait.
if the phone does boot after flashing, wait a minute, reboot to recovery, wipe data/factory reset and reboot (even if the device boots at first time, i advise u to do this wipe anyway)
back working again, couldnt get into the recovery mode, tried the up volume home and power, also searched and tried the up down power also, all i want to do is unlock my phone lol
jayceemcg said:
back working again, couldnt get into the recovery mode, tried the up volume home and power, also searched and tried the up down power also, all i want to do is unlock my phone lol
Click to expand...
Click to collapse
But now is the phone fixed or not?
Or are u still stuck trying to get into recovery mode?
Remove battery, and press vol up, home, and power. Release the power when samsung galaxy s2 appears but keep holding vol up and home
Sent from my Nexus 7 using xda app-developers app
phone is working, but want it unlocking....cannot access recovery mode, tried Remove battery, and press vol up, home, and power. Release the power when samsung galaxy s2 appears but keep holding vol up and home.
phone it's working fine and you can't get into recovery mode?
Keep trying that combo, do it while the device is off, press it till you get there.
And why the hell do you want to get into recovery in order to unlock the phone?
Sent from the little guy
the guy above recommended i go to recovery and delete all data, so thats what i was trying to do, he also helped get my phone back working, is it possible to unlock without rooting ?
Yes, by getting the unlock code from your carrier.
I suggest you read a couple of threads before you attempt rooting it.
Sent from the little guy
i bought the phone on my carrier from ebay, i have now changed carrier but like the phone.
Root it is.
Did you get into recovery yet?
Sent from the little guy
cant get into recovery mode, struggling now.. think i will just get rid and get a different phone.... been at it for hours with no joy.... thanks for all the help guys
http://forum.xda-developers.com/showthread.php?t=2219755
Follow that tutorial
AndroidPlant
An everyday user.

Categories

Resources