Hi guys,
I just flashed criskelo rom to my phone, but I tried to do a hard reset using the code (*2767....) and now my phone is stuck on the boot screen (SAMSUNG). I've waited a long time already, left it over night and nothing.
Also I tried to recover the back up I made with CWM, but I'm again stuck on boot screen...
Any ideas on what I can do??
Thanks
go to recovery, do a data reset and wipe cache..hope this helps..worked for me a few times.
ahmedmaaiee said:
go to recovery, do a data reset and wipe cache..hope this helps..worked for me a few times.
Click to expand...
Click to collapse
Already tried data/factory reset, wipe cache partition and wip Dalvik Cache. Still not working :crying:
Ryudo0 said:
Already tried data/factory reset, wipe cache partition and wip Dalvik Cache. Still not working :crying:
Click to expand...
Click to collapse
have you tried flashing to the stock rom using Odin?
Ryudo0 said:
Already tried data/factory reset, wipe cache partition and wip Dalvik Cache. Still not working :crying:
Click to expand...
Click to collapse
Try either flashing a stock firmware through Odin, or go into recovery and format /system in addition to wiping data, cache and Dalvik, and install the ROM zip again.
Arachnid92 said:
Try either flashing a stock firmware through Odin, or go into recovery and format /system in addition to wiping data, cache and Dalvik, and install the ROM zip again.
Click to expand...
Click to collapse
OMG THX...
I just flashed a stock firmware through ODIN and it's ALIVE!! Thanks...
(before i flashed on ODIN I restarted my laptop and it was stuck on BOOT... its like a curse omg... i had to go to safe mode to make it work again...)
Its all working now thanks
EDIT: Well... i rooted the phone again, flashed the rom, but this time I tried to make the wipe cache and factory reset through the CWM (volup+home+power), but I got stuck on boot screen again.... Guess I'll have to stay with the rom but without wiping it
Ryudo0 said:
OMG THX...
I just flashed a stock firmware through ODIN and it's ALIVE!! Thanks...
(before i flashed on ODIN I restarted my laptop and it was stuck on BOOT... its like a curse omg... i had to go to safe mode to make it work again...)
Its all working now thanks
EDIT: Well... i rooted the phone again, flashed the rom, but this time I tried to make the wipe cache and factory reset through the CWM (volup+home+power), but I got stuck on boot screen again.... Guess I'll have to stay with the rom but without wiping it
Click to expand...
Click to collapse
If I remember correctly, Criskelo ROM does not require you to wipe anything if you're coming from a stock ROM (it does everything through the install script). So just install it and live happily ever after
getting stuck on the boot screen is normal...i did twice already while flashing new rooms...usualy for forgeting to wipe. reflashing the stock rom always works.
Related
Hello guys,
Just got my new I9100 yesterday.
Phone Specs:
PDA: I9100XWKL1
Phone : I9100DDKL1
CSC: I9100DDKL1
I flashed CF Root I9100XWKL1 and rooted my phone. Later I downloaded official MIUI and flashed it via CWM Recovery. Wiped cache and Dalvik cache. Now the phone is stuck at MI logo. I just hear the galaxy sII startup tone and the phone shows logo and does not moves ahead. What to do now guys? Have I went somewhere wrong?? Guide me
Try reflashing the rom without any wipe.
Or boot into recovery if you can & do a wipe/factory reset.
m2smoe said:
Try reflashing the rom without any wipe.
Click to expand...
Click to collapse
I tried reflashing still stuck at logo.
MistahBungle said:
Or boot into recovery if you can & do a wipe/factory reset.
Click to expand...
Click to collapse
Done. Booted now after factory reset Thanks
As strange as this may sound, I usually wipe cache and dalvik before flashing the ROM...I had similar issues with CM7 when I wiped cache and dalvik after install. Enter recovery again, wipe cache and dalvik and flash ZIP, then reboot and see...
Otherwise, the only other possible explaination is that the first bootup does take some time...but usually never pauses or stops the animation.
0semaj0 said:
As strange as this may sound, I usually wipe cache and dalvik before flashing the ROM...I had similar issues with CM7 when I wiped cache and dalvik after install. Enter recovery again, wipe cache and dalvik and flash ZIP, then reboot and see...
Otherwise, the only other possible explaination is that the first bootup does take some time...but usually never pauses or stops the animation.
Click to expand...
Click to collapse
Hmmm that's not very strange. Also I was considering that first boot will take time as dalvik cache is prepared and then system gets running. But the wait time was abnormal in first case.
Sent from my GT-I9100 using Tapatalk
Hi,
I was previously on leaked firmware XXELK4(4.1.2) and then I flashed XXDLJ5(4.1.1) On top of that and now my phone doesnt start. it is stuck at samsung logo. Some one please tell me how to fix this please
can you get in to recovery then factory reset it if that don't work re flash 4.1.2 with odin
got-petrol said:
can you get in to recovery then factory reset it if that don't work re flash 4.1.2 with odin
Click to expand...
Click to collapse
I presume you have tried taking the battery out and outting it back in again,
If you can get into recovery, wipe data, wipe dalvik cache and cache.
If you cannot get into recovery, flash cf-root first. After that, enter to recovery. Wipe all and format system. Flash dlj5 again with ODIN.
Greetings.
thanks guys ! I did wipedata/factory reset and it got solved
ok i had download odin, and flashed everything went great, it reset and just hung on the boot logo for like 5 min, then installed TWRP and flashed Superuser and wiped cache and dalvik and then rebooted, same thing it will not get past the att boot logo, i do not have kies installed but i do have the usb drives. could that be and issues?
Bradl79 said:
ok i had download odin, and flashed everything went great, it reset and just hung on the boot logo for like 5 min, then installed TWRP and flashed Superuser and wiped cache and dalvik and then rebooted, same thing it will not get past the att boot logo, i do not have kies installed but i do have the usb drives. could that be and issues?
Click to expand...
Click to collapse
If you used Odin kies wouldn't be involved. I had similar problem. I did a complete wipe (both caches, system and data) then installed via Odin again. Now all is good.
Sent from my SAMSUNG-SGH-I717 using xda premium
thank you, that worked.
if anyone has this problem again save yourself some time. reboot into recovery and factory reset. Worked for me.
440bro said:
if anyone has this problem again save yourself some time. reboot into recovery and factory reset. Worked for me.
Click to expand...
Click to collapse
also rebooted into stock recovery and factory resetted. FInally booted, give it some time (likke 5-10 minutes) after the ATT logo freeze, Its probably building the bloatware cache.
Keep in mind installing this rom is a change of rom base and not just a little tweek -- all the wipes we usually do and backups of everything should be done to ensure a clean install.
It is a nice stock rom, and I was shocked at the amount of at&t bloat included.
chrisrotolo said:
also rebooted into stock recovery and factory resetted. FInally booted, give it some time (likke 5-10 minutes) after the ATT logo freeze, Its probably building the bloatware cache.
Click to expand...
Click to collapse
Lololol bloatware cache
It's building the dalvik cache, just like every Rom does when you wipe dalvik cache, or factory reset as dalvik is on the data partition.
AT&T are just freaking amateurs, they didn't make the boot animation loop at all... so once it's done and is building the cache. It appears to have just stopped there.
Hi,
Last night my I9300 decided to randomly reboot and get stuck in a bootloop. This morning I took the time to wipe my cache, data, etc. through CWM but it still would not boot. I did a wipe data/factory reset, wiped cache again and installed the latest AOKP nightly, but it still will not boot.
I can start the bootloader through CWM and I can also get into download mode, but it just won't boot Android.
ADB does list my device while in the bootloop, but I get a "device unauthorized" message.
I've had bootloops before and wiping cache/data/factory reset/installing a new rom always worked, but in this case I am clueless.
What can I do? Is there maybe a way to connect logcat without unauthorizing, or authorizing from CWM, or something?
Do you have the newest CWM?? Or try any other custom recovery
As above, use the latest recovery then manually format system, data, cache preload and data/media/0
Sent from my GT-I9300 using Tapatalk
verny94 said:
Do you have the newest CWM?? Or try any other custom recovery
Click to expand...
Click to collapse
How can I do this if I cannot authorize a ADB connection?
If yours recovery works flash the newest version
If not flash a stock ROM via Odin
dalvik cache
art0rz said:
Hi,
Last night my I9300 decided to randomly reboot and get stuck in a bootloop. This morning I took the time to wipe my cache, data, etc. through CWM but it still would not boot. I did a wipe data/factory reset, wiped cache again and installed the latest AOKP nightly, but it still will not boot.
I can start the bootloader through CWM and I can also get into download mode, but it just won't boot Android.
ADB does list my device while in the bootloop, but I get a "device unauthorized" message.
I've had bootloops before and wiping cache/data/factory reset/installing a new rom always worked, but in this case I am clueless.
What can I do? Is there maybe a way to connect logcat without unauthorizing, or authorizing from CWM, or something?
Click to expand...
Click to collapse
On Cwm click advance and try wiping dalvik cache if that doesn't work install your stock rom
Hey Guys, I'm new here,
I am really confused, i am trying to flash stock rom using odin 4.38, but it got stuck at FORMATTING CACHE,
It will not move anywhere from there.
arifsenri said:
Hey Guys, I'm new here,
I am really confused, i am trying to flash stock rom using odin 4.38, but it got stuck at FORMATTING CACHE,
It will not move anywhere from there.
Click to expand...
Click to collapse
Just do another wipe data/factory reset and reboot system and it'll work normally
Chastomber said:
Just do another wipe data/factory reset and reboot system and it'll work normally
Click to expand...
Click to collapse
thanks for the reply man, but i have done the wipe data/factor reset so many time, but it still stuck at the same stage which is formatting cache. i would be very happy if you can help me :')