Related
I have flashed the Rezound to another CDMA carrier. I have a problem it adds 001 before the contact's 10 digits.(13 in total)
I have noticed that it actually calls rigth when dialing a non registered number(10 digits).
Could someone help me getting this unlocked? By any modification on the number registered or in the phone itself.
I have the CALL settings blocked, so not able to change from there, looked at ##778# and ##program# with no luck.
I used ALL of the ROMS with no luck, all the RUUs and i belive this will be reachable on any AOSP ROM, but currently there is not one working fine.
That is strange. What country are you in and carrier are you on?
Mexico, Iusacell. I figured placing an empty Sim card. And did the trick i cleared the assisted dialing. Returned to CDMA mode with no problems.
I post this if it is useful for someone in the future, but right now i am feeiln kinda dumb.
Hey Guys,
Ive done a search and havent come up with a concrete answer why my phone is not getting mobile network. Im able to connect with wifi but as soon as i leave wifi I have no luck. Im using Virtous Shooter v.3.0.5 and an HTC Evo 3D GSM. With the rooting and such the only thing I made a mistake on was in the revolutionary setup i selected CDMA and the incorrect HBoot. Could you guys give me a hand letting me know.
Thanks
MrToast
In addition im able to make and receive calls and text messages its just connecting to the internet when wifi is unavailable.
I can pay $5 via paypal to the person who helps me out fix this issue
You need to add the correct apn settings for your carrier under mobile network. Menu-settings-mobile network-access point names-menu add and then enter the settings then hit menu then save.
Just google your apn settings for your carrier or call and ask them for the proper settings, but google is quick and easy.
Sent from my HTC EVO 3D X515m using Tapatalk 2
I have the same problem sometimes.
Everything is correct in the settings.
I also have a connection to mobile network. But I often get a timeout...
On other Roms no problems.
I have GSM version of HTC Evo 3D, and I wanted to know how can I fix my problem.
No matter on what ROM I am i have problem sending SMS I am getting 'SMS not sent' error and I am not capable of sending SMS since i upgraded to ICS and new Radio.
Then I have problems with Wi-Fi, I dont know if its router or what but my Laptop is on that router and its alright but my phone just cant connect to it. While its not connected it shows me almost full signal strenght but when I am trying to connect strenght is very poor. I can test on other routers only tomorrow but I though that could be a common erorr maybe.
Maybe the kernel aren't flashing properly. Are you s-on?
Read, Search, Read again, ... Then Ask with Tapatalk 2
Do you know your security code for your wireless router, you must install that when you connect to wifi, sms make sure your sms settings are correct, your provider should have # for sending sms
Sent from my HTC EVO 3D X515m using xda premium
S-OFF
And of course i know about the secuirty code and where can i access SMS settings?
Hey guys,
I've been searching all over the tubes/threads and can't find a legit answer.
I have an EVO OG on Boost. Working 3G.
I have done all the standard steps in flashing the info over to the LTE.
I am able to get text/talk, but no 3G.
Specs:
S-ON
1.15 hboot
1.05.11.0606 radio
Donor: Evo OG > TP2
All keys, msl, important numbers acquired.
Flashed talk/text
I have QPST, QXDM, DFS 4.0.0.3, CDMA 2.7
There must be some step to flashing LTE phones. I've seen the SGSIII thread and the only different steps there are the PAP name ([email protected]), and I've seen members mentions 466_1 nams, and checking certain parameters and unchecking others, and none of it works.
Profile update gets error code 1233 so I can't even try that.
I'm at my wits end with this phone. I'd get CDMAWS3.8.7 if I knew for sure it'll get my 3G working. But others have got it without the software. What's missing from the standard incog/donor to EVO OG steps? Help guys.
YES
Alright! Got it working!
IDK about anyone else, but here's exactly what I did. I pray it helps at least one other out there!!
I was on hboot 1.15, custom rom, rooted, unlocked BLer, the works.
I flashed to Boost the EvoOG way. Got talk and text, no data working. Error 67/no 3G signal on Profile 1 (on prof 0 there was a 3g signal, but no connection)
Update Profile was the ONLY method I could not attempt because of Error 1233.
*Error 1233: Turns out this is some sort of connection issue between phone and sprint servers from what I gather. Some said it had to do with root, but I unrooted and still had this issue. Others said it was HTC specific. More on this later...
So to update profile, I decided to go ALL the way back to Stock.
Unrooted.
Relocked via ADB (fastboot oem lock)
DL'd stock Jewel Rom (unfortunately, put me up to 1.19 hboot from 1.15. No other RUU worked -- all said bootloader error except for this one, so I just went with this one.)
Once that was done, I tried updating Profile on my fresh phone.
Error 1233.
I reflashed Nams and Profile data and NV items.
Error 1233 on profile update. No 3G.
I did ##768#, reset everything. I was going to attempt to do another clean flash of Nams etc...
Phone reset information.
Here's the good part:
On android attempting Hands Free Activation, it failed. It then said "If you are not with rep, press activate", bringing up the hands free self-service screen. It failed, saying no connection, bla bla.
I went to standard android setup, and here's what I think did the trick:
-I made an HTC Account on the spot
-I connected to WiFi when directed
-Left location services on
Once done, it tried to activate AGAIN, and said "If you are not with rep, press actiavte"
Brings up the self-service screen, and for some magical reason,
It validated my account, showed my boost number, and now I've got talk, text, web on my Evo LTE on Boostmobile.
Went online, dled apps, checked ##debug#, and EVDOrevA for true 3G.
I strongly believe HTC account setup is what allowed the phone to bypass Error 1233. Or not. But it's the one variable that changed of my MANY tries. Perhaps having an HTC account allows the phone to use that HTC update profile service? In the description of the account setup it said "and allows you to connect to HTC software updates...", and I lumped this with update PRL firmware, profile, and HTC update, so I went and made an account via wifi.
Well! That's it! Hope it helps. Maybe someone can make more sense of it.
Special thanks to "iBlowpot" for giving some tips, albeit they didn't work, it's nice that at least one person tried to help.
I can confirm this is wierd but worked for me on 2 evo lte make sure it is on cdma only no lte thought. Great job
Alvaster said:
Alright! Got it working!
IDK about anyone else, but here's exactly what I did. I pray it helps at least one other out there!!
I was on hboot 1.15, custom rom, rooted, unlocked BLer, the works.
I flashed to Boost the EvoOG way. Got talk and text, no data working. Error 67/no 3G signal on Profile 1 (on prof 0 there was a 3g signal, but no connection)
Update Profile was the ONLY method I could not attempt because of Error 1233.
*Error 1233: Turns out this is some sort of connection issue between phone and sprint servers from what I gather. Some said it had to do with root, but I unrooted and still had this issue. Others said it was HTC specific. More on this later...
So to update profile, I decided to go ALL the way back to Stock.
Unrooted.
Relocked via ADB (fastboot oem lock)
DL'd stock Jewel Rom (unfortunately, put me up to 1.19 hboot from 1.15. No other RUU worked -- all said bootloader error except for this one, so I just went with this one.)
Once that was done, I tried updating Profile on my fresh phone.
Error 1233.
I reflashed Nams and Profile data and NV items.
Error 1233 on profile update. No 3G.
I did ##768#, reset everything. I was going to attempt to do another clean flash of Nams etc...
Phone reset information.
Here's the good part:
On android attempting Hands Free Activation, it failed. It then said "If you are not with rep, press activate", bringing up the hands free self-service screen. It failed, saying no connection, bla bla.
I went to standard android setup, and here's what I think did the trick:
-I made an HTC Account on the spot
-I connected to WiFi when directed
-Left location services on
Once done, it tried to activate AGAIN, and said "If you are not with rep, press actiavte"
Brings up the self-service screen, and for some magical reason,
It validated my account, showed my boost number, and now I've got talk, text, web on my Evo LTE on Boostmobile.
Went online, dled apps, checked ##debug#, and EVDOrevA for true 3G.
I strongly believe HTC account setup is what allowed the phone to bypass Error 1233. Or not. But it's the one variable that changed of my MANY tries. Perhaps having an HTC account allows the phone to use that HTC update profile service? In the description of the account setup it said "and allows you to connect to HTC software updates...", and I lumped this with update PRL firmware, profile, and HTC update, so I went and made an account via wifi.
Well! That's it! Hope it helps. Maybe someone can make more sense of it.
Special thanks to "iBlowpot" for giving some tips, albeit they didn't work, it's nice that at least one person tried to help.
Click to expand...
Click to collapse
rx7mike said:
I can confirm this is wierd but worked for me on 2 evo lte make sure it is on cdma only no lte thought. Great job
Click to expand...
Click to collapse
Real glad to hear that. And yes, CDMA only or CDMA HDR only must be selected under ##data#.
rx7mike said:
I can confirm this is wierd but worked for me on 2 evo lte make sure it is on cdma only no lte thought. Great job
Click to expand...
Click to collapse
Im getting the error 16 message too. everything is swiched over meid esn it even displays boost but no 3g i cant make calls or send texts, but if someone calls me it rings then hangs up. ive done what you said but when i reboot to go through the andriod setup it doesnt ask me to setup an htc account. i wondering how to go about that. Also, when i go to ##786# and reset everything and reboot the hands free activation actually activates, but when i get into the phone sprint is displayed again. im so close i can tast it and i know its something small. any help would be awesome
Thanks
evo 4g lte to boost
cdublu33 said:
Im getting the error 16 message too. everything is swiched over meid esn it even displays boost but no 3g i cant make calls or send texts, but if someone calls me it rings then hangs up. ive done what you said but when i reboot to go through the andriod setup it doesnt ask me to setup an htc account. i wondering how to go about that. Also, when i go to ##786# and reset everything and reboot the hands free activation actually activates, but when i get into the phone sprint is displayed again. im so close i can tast it and i know its something small. any help would be awesome
Thanks
Click to expand...
Click to collapse
I keep getting error code 67 wen i try n activate the 3g connection and use the web. ive successfully flashed it to boost but can't seem to get 3g working do u or do u know of another place to look on the web that can help. will be more than willing to share any past present or future info with u or others. email me at [email protected].
Factory resets
cdublu33 said:
Im getting the error 16 message too. everything is swiched over meid esn it even displays boost but no 3g i cant make calls or send texts, but if someone calls me it rings then hangs up. ive done what you said but when i reboot to go through the andriod setup it doesnt ask me to setup an htc account. i wondering how to go about that. Also, when i go to ##786# and reset everything and reboot the hands free activation actually activates, but when i get into the phone sprint is displayed again. im so close i can tast it and i know its something small. any help would be awesome
Thanks
Click to expand...
Click to collapse
I don't think most of you fully understand what happens when you perform the ESPT command ##786# (## RUN#), this is one of 2 types or of factory resets.
- The traditional Factory Reset that you normally do from either the settings menu> Back-up /Reset or from a Recovery (TWRP or CWM), only removes and your Google Account settings, it it does not change the Radio and Hardware settings within the phone. It does not remove your settings to MDN, MSID or Network Radios (basically the way the phone identifies with the network)
- ## RUN# > Reset, removes ALL phone identity modifications to the phone, less MEID , HEX, and DEC changes, and thus is a TRUE factory reset as it will remove your M.IP Usernames, MDN, MSID, and other settings that identify the phone to a network, thus leaving your phone with the ability to get back on the network upon reprogramming of account identities
You should only use this when flashing or giving/selling to phone to someone to prevent them from using your account or info. Use the traditional factory reset when simply trying to clear out your settings and not changes carriers or phone numbers.
First of all, I'd like to thank you guys for everything you have posted on these forums. They have provided me with all the answers I've needed so far. But I'm finally stuck. I recently flashed a Sprint Evo 4G LTE to the Boost Mobile network. When I first completed the flash I had both error 16 and the data call failure error. I got rid of the error 16 by contacting Boost and complaining that my donor phone couldn't call out. They quickly amended the problem by doing whatever on their end. I played with the HA and AAA keys, and got the data call failure to go away by using the hex code from nv item 466, which was 34 digits long, where I just dropped the first two numbers. I also had to drop the first two digits of my second AAA key because it was 14 digits long. Using these numbers, I no longer get error 67 or a data call failure popup. When I enter ##debug# > EVDO Engineering, at the very bottom it just always says 1 = authenticated.
For the record, I have the Boost Mobile 61009 prl, but have tried various Sprint prls as well, because I read on this forum that might help. I currently have the Sense-based MeanRom installed in order to use the ## codes, and this forum has suggested to try to update profile and update prl, neither of which work. When I choose update profile, I get an error 1012, when I choose update prl, I get an error 1233. Any suggestions are much appreciated
As of right now, I am installing a different Sense based Rom, called MeanBean v2.3. I'll see if I have any luck.
For the record:
Baseband: 1.12.11.0809
Build number: 2.13.651.1
Donor phone: Samsung Rant
Plan: $50.00/month Unlimited Plan
Update: Changing to this ROM has not yielded any results.
I'm going to relock the bootloader and update my firmware with the 2.13 RUU, and then unlock the bootloader and reinstall MeanBean 2.3 to see if that helps. In the MeanBean documentation, it states
If your baseband is less than 1.12.11.1119, you have old firmware and should update else you could have problems with your data connection, reboots, etc.
Click to expand...
Click to collapse
Data Fix (Profile Switch)
datatype_void said:
First of all, I'd like to thank you guys for everything you have posted on these forums. They have provided me with all the answers I've needed so far. But I'm finally stuck. I recently flashed a Sprint Evo 4G LTE to the Boost Mobile network. When I first completed the flash I had both error 16 and the data call failure error. I got rid of the error 16 by contacting Boost and complaining that my donor phone couldn't call out. They quickly amended the problem by doing whatever on their end. I played with the HA and AAA keys, and got the data call failure to go away by using the hex code from nv item 466, which was 34 digits long, where I just dropped the first two numbers. I also had to drop the first two digits of my second AAA key because it was 14 digits long. Using these numbers, I no longer get error 67 or a data call failure popup. When I enter ##debug# > EVDO Engineering, at the very bottom it just always says 1 = authenticated.
For the record, I have the Boost Mobile 61009 prl, but have tried various Sprint prls as well, because I read on this forum that might help. I currently have the Sense-based MeanRom installed in order to use the ## codes, and this forum has suggested to try to update profile and update prl, neither of which work. When I choose update profile, I get an error 1012, when I choose update prl, I get an error 1233. Any suggestions are much appreciated
Click to expand...
Click to collapse
Open QPST and connect to ypur device,
Open QPST Service Programming
Go to M.IP Tab, click Read tab, enter your SPC/MSL Code,
On the right side under ACTIVE USER, (not in profiles) change it to "1" instead of 0,
(0 is only meant for Evo 4g not LTE )
Click "write to phone"
Restart the device and you should have data.
There are additional ways to increase 3g speeds as well, but they need to be performed AFTER this process.
Error 67 Fix
Note: Make sure you're on a Sense ROM or the ESPT codes you need will not respond or function (##3282#, ##3424#, etc).
Also, if you have questions about how to use the programs listed, then you're too far ahead and need to do a quick read/ trial and error of the basics so you know how to use them.
If you are having a hard time getting data back up and running, for the Evo LTE then I suggest the following using the following items:
work.
CDMA Workshop
QPST - Service programming
DFS
- Connect your donor phone and open DFS
Click on the Programming Tab (Main Tabs),then read in the values from your donor phone and take screenshots of The Following Sub Tabs: NAM, Data, and Mobile IP
Within the Mobile IP Tab there are 2 radio buttons for Profile, click on each and make sure to get good screenshots of each.
First Check and Compare your Data Info in with what you have saved in your Donor Phone Items/Notes, if not save both your old and new notes to compare and change later.
Connect your EVO LTE and open DFS, and your screen shots. Compare and make any changes that do not match from your Screenshots, to your EVO LTE.
- Close DFS.
- Open QPST - Service Programming, read in your EVO LTE's info, enter your SPC (MSL). Click on the M.IP Tab and compare the information
with your and check for any errors, also be sure that Profile 1 is the active profile.
(Profile 0 is for non-LTE phones)
- Close out of QPST - Service programming.
- Open CDMA Workshop.
Click the Security Tab and send your SPC (MSL). Next click on the NAM tab and load and write your NAM 1 and NAM 2 files for their respective profiles
(hopefully you saved this as well as your NV Items from your donor phones profile).
Next, click on the Memory Tab and write your NV Items to your phone (465, 466, 1192, and 1194)
Finally click on the Other tab and write your donor's PRL (or one you've downloaded) Choose LG not Universal. and choose NAM1.
After which DO NOT disconnect, simply attempt to close the program and it will ask if you would like to restart the phone to apply modifications, click OK or restart your phone manually and you should be good to go.