Stuck with Doomlords bootloops - Sony Xperia P, U, Sola, Go

Hi, i think i have a problem with the wrong kernel installed.
I have a SXSwith ICS and since a couple of days i tried to unlock the bootloader, put Doomlords CWM on it an root it, because i like to try another ROM.
I Unrooted it via the official way wich worked out good, the only thing strange was that i restarted and it seemed the whole phone was resetted.
Than i wanted to root and i had to put the phone in recovery mode, and i choose the doomlord CWM and flashed it using this guide
.
Xperia S
1.Download the Doomlord CWM Recovery image (download link here) and the Wi Fi Module for Doom Kernel (download link here) and place the same to the computer.
2.Go and rename the “S-DooMKernel-v01_kernel.elf” file into “kernel.elf”.
3.Copy the file renamed on the same folder with ADB / fastboot.
4.Take your phone and its USB cord and by using both connect it with the computer.
5.Copy-paste the “S-DooMKernel-v01-Modules.zip” file from the PC to the Xperia S SD card.
6.Disconnect the smartphone from the computer.
7.Reboot it by entering in fastboot; press the Volume Up button while connecting the phone with the PC.
8.On the computer open command prompt (Start -> run -> cmd) and enter the command: fastboot flash boot kernel.elf. If this isn’t working try with: fastboot -i 0x0fce flash boot kernel.elf.
9.The handset should reboot.
10.When you see the light turn blue hold the Voluem Up button. The Xperia S will enter in recovery mode.
11.In the recovery menu select “install zip from sd card” and pick the file copied there on step 3.
12.The installation procedure should begin. Don’t press anything as the process might take up to 10 minutes to complete.
13.In the end, from the recovery mode menu select “reboot system now” and you are done.
There you have it; that was the easiest and fastest way in which you can learn how to install Doomlord’s ClockworkMod Recovery on your Xperia S smartphone. Do tell us if there were problems on your way, of if you had issues in understanding one of my directions. Now you can go and update your Xperia S with the lasts ROMs available. Take a look and see if the
Everything seemed to be working but the phone is stuck in Doomlords bootloops.
If i hold the volume up than i can enter CWM but the phone doesn,t start anymore.
The phone was running on a stock ICS ROM (i believe the Swiss one)
I flashed this kernel, 2.6.35.11/Doomkernel.nr1 and SDoomkernel v01 Modules.zip
Who can help me out since i,m stuck here.

---

doomlord kernel is for GB since youre on ICS try KA Kernel, XSX Kernel, and the Advanced stock ICS. look in the development section. you can flash it in CWM since youve flash doomlord kernel or try to flash via fastboot.

---

Thanks for your quick response, how can i put the kernel on the internal sd?
the phone doesn't start, so it wont be recognised by windows, i tried to mount in CWM but windows doesn't see it.
If i flash in fastboot mode, do i have to change the name again and wich name if i take the KA kernel for example.
Thanks

---

koossmatrooz said:
Thanks for your quick response, how can i put the kernel on the internal sd?
the phone doesn't start, so it wont be recognised by windows, i tried to mount in CWM but windows doesn't see it.
If i flash in fastboot mode, do i have to change the name again and wich name if i take the KA kernel for example.
Thanks
Click to expand...
Click to collapse
Just downlaod the advanced stock kernel (the fastboot link) and flash it in fastboot
It will boot :good:

---

just download any of the 3 but u need the .elf file and then flash via fastboot you dont need to change the name just used the name youve downloaded to flash.
for example : ics14.elf
used fastboot or adb
fastboot flash boot ics14.elf
you can also used the flashtool, flash via fastmode then choose the ics firmware you have then flash only the kernel. uncheck everything except the kernel.
but the easy way to do is flash via fastboot mode.

---

I just tried using flashtool, everything goes fine exept it doesnt flash.
Downloaded the Stock "Swiss" ROM and tried to flash with flashtool, it recognised the device, because it says device connected, then it askes to unplug en plug in the device, which i've done then the pop up that tells to disconnect/connect the device stays on and nothing happens.
I'm getting a little worried now...
Thanks for your replie

---

hey you have working fastboot right or adb? flash a kernel like what ive said above using fastboot,
or you can try this, dont connect your phone to pc yet, make sure it is turn off (hold power button +power up wait till it vibrates 3 times.)
1. open flashtool
2. choose your firmware.
3. when it says unplugged your phone,connect your phone to pc then hold power button +volume up wait till it vibrates 3 times, then hold power button + volume down then release it will flash.

---

Thanks for all the replies, i got it working.
Seems that i turned my phone one in fastboot mode and not the flashmode...oops
Flashed the original Swiss ROM again and it works again, thankgod!
But i dont want the original anymore, can i just flash another available rom on the android dev section or do i need to root? Sorry for beeing such a noob.

---

yes you can just flash any custom kernel it will give you auto root, then u can start flashing rom via cwm. just follow the instructions in every rom.

---

I am having the same problem as I am stuck with DoomLord's boot loop. I tried to flash ICS stock rom but cant get to flash it. I tried holding the power button + volume up key(until i get the three vibration) and then hold power button + volume up key and release, I get the same DoomLord's boot loop again. I am using X10 Flashing Tool Version 0.8.0.0 Somebody please help me. The device can fast boot.

---

download the latest flashtool, then download ICS stock firmware of your choice on the general section, then flash it via flashmode. (power+volume down)