Doomkernelv04 takes hard reset everytime on wifi on - Sony Xperia P, U, Sola, Go

So today i installed Doomkernelv04 and the wifi modules on the Xperia S. Its an 6.0.A.3.76 Firwmware (rooted). Some of my preinstalled apps crashed after flashing the kernel plus whenever i try to turn on the wifi, The Phone takes a hard reset. Any suggestions???
- Didnt Installed it from an img file
- Was using stock firmware 6.0.A.3.76 after rooting but with stock kernel.
- Is there anyway that i cant stay on DoomKernel0.4 but use wifi modules from stock? Download the stock 0.73 wifi modules from Doomkernel thread.
- Can i just update it from recovery and use it with DoomKernel? Or do i need to flash stock kernel to use the stock wifi modules??

SERIOUSLY!!??!! No suggestions????

Related

[Q] WIFI only (USA) rooted -Stock rom- update fails

my stock firmware update downloads fine and fails when try to apply after reboot.
I rooted my Tab back when it came out around 6/2011, I have install the cwm_4.0.0.4-sam-tab-10.1, supper user and USB wifi adhoc - did not delete any apk.
current version 3.1
kernel 2.6.36.3
I have not tried anything in CWM recovery for now.
Thanks for any help.

[Q] Wifi and phone refuse to work after flashing custom kernel

I have a X10 mini, after flashing the custom kernel by nAa and my phone wont make phone calls and use wifi. However when I tried to reflash into stock, it still wont work. How should I fix this without resorting it to flashing back to stock via Pc companion?
did u flash it properly? try flashing the stock kernel with flash tool again.

[Q] wifi error

I have installed wolf xperia ulbldoom rom on my x10. The kernel was doomkernel medium overclock. I was having problems with wifi disconnecting evey now and then so I installed the wifi modules using xrecovery. Now the wifi wont turn on and says error. After that i have tried installing the wifi modules using CWM recovery, tried installing the kernel again, tried installing the full overclock kernel but still getting wifi error. Please help!!!!
Make sure you have unlocked your bootloader, maybe a clean install can fix that.
r_raghupati said:
I have installed wolf xperia ulbldoom rom on my x10. The kernel was doomkernel medium overclock. I was having problems with wifi disconnecting evey now and then so I installed the wifi modules using xrecovery. Now the wifi wont turn on and says error. After that i have tried installing the wifi modules using CWM recovery, tried installing the kernel again, tried installing the full overclock kernel but still getting wifi error. Please help!!!!
Click to expand...
Click to collapse
Had the same problem make sure you have the correct wifi modules. if so try download again maybe a corrupted download (so it was for me)
Do a full wipe (factory reset) and clean the dalvic cache the reinstall the ulbldoom rom
You should also check if the bootloader is unlocked as written above by linkermix
Ther is a tool in the development thread for checking
hit thank button if i helped. feel free to pm for further questions
Greetz Darkmind
solved
thanks guys... so i installed the wolf mod again and since the last thing i did was flash the doomlord full overclock kernel, my phone is running faster than it has ever been. I could not be happier
i have problem too, can u tell me way of fix

Wifi module for stock kernel? Do I even need it?

Hi,
So this is what happened. I installed DoomKernel v06 kernel to try it out with DonutHD. Obviously I had to install wifi module to make it work.
I did not like to kernel and flashed the stock kernel back.
Now the problem is that wifi does not work. It gives "error" when enabled. How do I fix this? Do I have to install some stock wifi module?
nevermind... found it here: http://forum.xda-developers.com/showthread.php?t=1254322
1. flash kernel
2. install rom
3. install wifi modules
it should work, because I use doomkernel and Im doing it this way with no problems

Stock ROM but with modded kernel

I have installed CPU analyser, and with stock ROM I think the slowest it goes is 300mhz, WIth a modded ROM it slows down to 110mhz. So I'd like to use modded kernel with stock ROM (I've found no ROM's to be as quick or stable as stock)
Is it possible to have stock LK1 firmware, but with rafa's modded kernel? My procedure is
1) Recover LD1 firmware with ODIN
2) Reboot update LK1 in KIES
3) add super user. Boots, make calls etc
4) Apply kernel and modules. Boot and lost IEMI. I have tried restoring IEMI from my backup in galaxy toolbox, rebooted. But it still doesn't work.
Am I doing something wrong, or does the stock ROM not support modded kernel/modules in anyway?
Also if I do get it working, do I need some kind of CPU/battery saver or are the routines built into the kernel, no other apps are needed? I tried one app, it seems to work but it keeps on popping up with a message that it's using superuser priv, so it's quite annoying.
flash modules of kernel after flashing the kernel without rebooting in between!
this way u won't loose imei!!
whenever superuser permission message come up, there's an option below to remember the choice, click it and then message won't appear again!
ah so flash kernel, then modules without rebooting? I'm pretty sure a couple of guides say flash kernel, reboot (go straight back into recovery) then flash modules.
which specific (filename) kernel and modules to use with stock LK1 ROM?
201303051129-E3-boot.img
and
201303051129-modules
did that, emergency calls only! arggh
Try flashing modules after reboot.. Flashing modules should solve imei problem!
Sent from my GT-S5830i using xda app-developers app

Categories

Resources