<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLPU_I9100XXLQ6_I9100XEZLP3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img
While Flashing Latest Stock ODIN getting stuck again and again on same MSG "cache.img" any solution ????
IAmRizzler said:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLPU_I9100XXLQ6_I9100XEZLP3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img
While Flashing Latest Stock ODIN getting stuck again and again on same MSG "cache.img" any solution ????
Click to expand...
Click to collapse
If you did NOT check repartition and did NOT select a .pit file then you are safe. Then you can just try again. Or try again with a different rom and/or a different USB cable.
Sounds like the tar file you downloaded might be corrupt. Try downloading it again, and once you've done so/unpacked the tar, use 7Zip to test the integrity of the archive. If it comes up all files OK/no errors then that isn't your problem.
Related
Hi
I have downloaded I9300XXDLIB_I9300OXFDLI1_XEO and flashed in windows XP with ODIN 3.07 all went smooth but now the phone and odin does not advance..
ODIN kept at hidden.img
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXDLIB_I9300OXFDLI1_I9300XXDLIB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
and after 10 minutes does not finish flashing this rom...
I wonder if i must start the process again or what should I do?
i hope you can help me
Thanks in advance
I have followed all instructions I have seen and can not get it to work. Everytime I press start on odin it starts but then says failed shortly afterwards.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9305_CWM_Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am a newbie at this and I have no idea what to do but I cant get it to work please help
my s3 gt-i9300 is soft bricked... i have tried kies and odin but i didn't work... it gives the following error..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLH1_I9300OJVBLH1_I9300XXLH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> system.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help me out guyz...
Hi Guys,
I have AT&T Note edge and i tried to install kitkat on it by using the files from the following link
http://androidromupdate.com/att-gala...tock-firmware/
and i tried this also
http://www.androidrootz.com/p/galaxy...-firmware.html,
and this too
http://forum.xda-developers.com/note...files-t3108344
getting the error like this
<ID:0/006> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> CF-Auto-Root-trltetmo-trltetmo-smn910t.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/006> Odin v.3 engine (ID:6).. <ID:0/006> File analysis.. <ID:0/006> SetupConnection.. <ID:0/006> Initialzation.. <ID:0/006> Get PIT for mapping.. <ID:0/006> Firmware update start.. <ID:0/006> recovery.img <ID:0/006> NAND Write Start!! <ID:0/006> cache.img.ext4 <ID:0/006> FAIL! (Auth) <OSM> All threads completed. (succeed 0 / failed 1)
on phone i m getting this
sw rev check fail:[aboot] fused2>binary 1
[1]emmc write fail:aboot
and i bricked my phone, i can go only in to download mode.. pls help out.
same here =( nobody can help us
I'm having trouble with flashing the stock rom for the Samsung Galaxy S3 on Odin, as I get a fail everytime I try to flash the rom onto my device.
This comes up everytime I try to flash:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGOK1_I9300NZCGOK1_I9300XXUGOK1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The model number is a GT-i9300, and no stock roms so far have succeeded.
I have used Odin 3.07 and Odin 3.09, my samsung drivers are up to date and Odin still fails to flash the rom.
I've also tried different usb cables, along with trying out different ports, none of them have worked.
On the S3 it's currently running TWRP version 3.0.2-1, it also asks me whether or not I keep it "System Read only" whenever I go in recovery mode. And each time I always choose the option of keeping it read only. I don't know if these has anything to do with Odin failing to flash the rom but might as well mention it. I was also running CyanogenMod13 for roughly a month before the brick happened.
Any help would be appreciated !
Reply
Kiddzu said:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGOK1_I9300NZCGOK1_I9300XXUGOK1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
Click to expand...
Click to collapse
Hi, after NAND Write Start!! and this double !! means it start to WRITE on your Device Flash Memory when this fails it means that the cable dont transfer correct data / Cable Connection OK but wrong cable cannot write correctly on your device
I recommend you to use Original cable when flashing or a other cable but look for the compatibility to devices:good:
as far as I know it cant be a other opportunity to fix this because in the Download Mode of the s3 is the only way to Flash Original Firmware when this fails i dont now how to continue and i cannot help you more than that
And sry for my bad as fu** English