Hi am obviously new to these forums but not new to Android/Samsung development so I had custom roms installed on my I777 so I needed to revert back to stock in which I flashed a leak which apparently changed the pit so I was able to download all the stock files for Odin3 for my device in the Download Repository. My question is there any reason why my device just doesn't act as accurately as I though I remembered it being when it was stock. Is there any ultimately right process for flashing because most instructions including my own are all different, some say wipe cache and data first and battery pull then download mode Creepys says its not neccessary until after the flash as does ZedoMax. I've followed all of them and haven't understood why there is no ultimately right process if there is one at all using odin3 and one-click. And if this is the case what could possibly be going on with the force closes and hangups I'm getting? If someone is willing to take the time to help me with all these questions I'd greatly appreciate it.
Dunno if it'll help, but it won't hurt..
Boot into recovery and"fix permissions". *Should* help with the FC's - oh, and delete everything from your memory that you read on galaxys2root (zedomax). Whatever you've read from creepy, COMMIT to memory. The guy is ace!
Clay
Team Pirate
Sent from my PINK SGH-I777
clay101eve said:
Dunno if it'll help, but it won't hurt..
Boot into recovery and"fix permissions". *Should* help with the FC's - oh, and delete everything from your memory that you read on galaxys2root (zedomax). Whatever you've read from creepy, COMMIT to memory. The guy is ace!
Clay
Team Pirate
Sent from my PINK SGH-I777
Click to expand...
Click to collapse
I don't see the option for fix permissions first of all is that a cwm option? Also I know creepy is one of the best but what's wrong with gs2root? And I appreciate the help but which process is the ultimate right way? Do you flash pit,PDA,modem all together or is that incorrect?
GalaxyHackster85 said:
I don't see the option for fix permissions first of all is that a cwm option? Also I know creepy is one of the best but what's wrong with gs2root? And I appreciate the help but which process is the ultimate right way? Do you flash pit,PDA,modem all together or is that incorrect?
Click to expand...
Click to collapse
I don't remember for sure, but I don't think fix permissions in available in stock 3e recovery. It should be available in just about any custom recovery.
GalaxyS2Root, and it's owner who goes by the screen name zedomax, is a strictly commercial endeavour, designed to make money but not necessarily designed to help people. I think zedomax is a developer, but I'm not sure how good he is. Many of the offerings on that web site, and presumably on his dozens of other web sites for other phones, cause problems for folks, bricking phones, and other things. Further, he takes the work of developers here and posts their work on his sites without giving any attribution or remuneration. He's spread way too thin keeping up with all his various sites, and/or he just doesn't seem to care if his offerings cause problems. We've had so many people come to this forum with various problems due to GalaxyS2Root that when the name is mentioned, everyone is on it right away.
I would only use the pit to repartition on the I777 when everything else fails. It can be a help, but you should be sure that you are going to have a successful flash before you use it, since it repartitions the memory space of the phone.
Most firmware for the I777 has everything in one .tar file, which you put into the PDA slot. If you are flashing just a param.lfs or just a sbl.bin, then that goes into the PDA slot. You can also flash a modem at the same time as the rest of the firmware, using the Modem slot, but most firmware packages have the modem in them too.
So essentially the oneclicks are absolutely the only thing I need in order to ensure a 100% successful restocking? And if so am I always suppose to factory wipe/cache then battery pull (3e recovery doesn't have a power off option)? The reason why I ask so many questions is A. A lot of peoples data isn't accurate as you've stated and its better for me to have as much data as possible when potentially getting into these things. And B. I've been flashing my S2 like a madman with OCD because as soon as I'd get a force close or any sort of hiccup happened I assumed it was because I flashed it wrong when in fact I was just following some of the directions that I've aqquired from here or GS2Root and so far everything has flashed with the same results but as its been forever since my phone was purchased so I can recall if these are just the normal hiccups that come with the inconsistancy of android. So to me I'm just trying to.make sure that I'm doing things absolutely correct.
There is lots of material here to read. You can learn a lot about your phone by spending some time reading.
creepyncrawly said:
There is lots of material here to read. You can learn a lot about your phone by spending some time reading.
Click to expand...
Click to collapse
And you are absolutely correct and I have your guide bookmarked but with so many people having different takes on how to return to stock can you point me in a direction that's the completely right way of flashing your pit and attempt software. Or is your guide with one click the most surefire way to do it? Like I said before I'm a bit OCD when it comes to my phone so whenever I get a little hiccup I can't tell if those are just normal for I777 software or is it something I've done wrong which I probably haven't but it still worries me.
If you havn't done something absolutely ignorant, i.e. flash firmware for a different phone, then you should just use my guide with the linked one-click downloader. That package does not contain bootloaders or param.lfs. Those (the bootloaders and param) will always be good, and not needing replaced, if you only flash firmware from these forums and never flash leaked firmware (which usually contains bootloaders.) There should never, ever be a reason to use a pit file. As I said before, the phone has to be pretty seriously screwed before you need to repartition, and then it should be the absolutely last thing you try.
And inform yourself before you do any actual flashing. You should know exactly what you are doing to your phone, and also know what the remedy is before you do it. That way, you can avoid doing something stupid. If you really want to learn about your phone, read at least a little bit from the forums here every day for a few months, get involved in the discussions, and before you know it, you'll be one of the helpers.
Thank you so much for all of your prompt replies, I have been using the data from this site for quite some years now but never ran into any issues which required me to create an account (although I have wanted to), but for s**ts and giggles let me just say that due to the few hiccups I encountered and not knowing what would have caused them I have already flashed the pit and repartitioned as well as flashed the oneclick w/ bootloaders and param. Now asside from the few force closes that I ran into and the one time I bricked it and brought it back to fully functional is there any harm to the flashing of those tools that I've already done so far. Is there any negative side effects of what I've done that I may not be seeing or is it a case of well "there in the repository so theyre safe as long as I've flashed them correctly". And if so are these few force closes just everyday hiccups that every version of Android experiences and that I'm just overthinking it and it's just been a case of my ocd kicking me in the ass?
The danger in using those files is in the flashing. If a flash is inadvertantly interrupted or goes bad, then it can hard brick the phone. Once the flash is complete and successful, then you're fine. There are no side effects.
Force closes, and other anomalies can be caused by conflicting data is the system and data partitions. They can also be the result of bugs in the firmware distribution or in any of the various applications. To eliminate the first cause, following all the best proceedures when flashing such as wiping first, etc eliminates the possibility that the fc's are caused by improper proceedure.
With proper installation proceedure, and with a stable firmware, and with robust applications, you should experience little to no fc's.
creepyncrawly said:
The danger in using those files is in the flashing. If a flash is inadvertantly interrupted or goes bad, then it can hard brick the phone. Once the flash is complete and successful, then you're fine. There are no side effects.
Force closes, and other anomalies can be caused by conflicting data is the system and data partitions. They can also be the result of bugs in the firmware distribution or in any of the various applications. To eliminate the first cause, following all the best proceedures when flashing such as wiping first, etc eliminates the possibility that the fc's are caused by improper proceedure.
With proper installation proceedure, and with a stable firmware, and with robust applications, you should experience little to no fc's.
Click to expand...
Click to collapse
i did zedo then s2 unlock then aokp then siyah kernal change forgot to do triangle away then tryed a ota update messed up rom cwm messed up then i just did zedo again to get cwm again then i did aokp again then ran triangle away then i return to stock backup after root then odin flash for stock non root then i took stock and did ota update to 2.3.6 i dont think we will ever get 2.3.7 because google wallet is on 2.3.7 and we cant have it correctly .....on reboot it hangs so i did 3e wipe and cache delete reboot all has been good since batt has been outragously long on uckk7 but after ota update it shows as uckk6 i used a non rooted file maybe u used a rooted return to stock file ?anyway file i used was I777UCKH7-CL503881-No-BL as stated just used pda slot .....idk after all the custom roms theres a distinct feeling in knowing your stock again but have the ability to go and do it all over again i honestly just miss the torch feature and the easy brightness slider on the pulldown
im getting h+ but it doesnt seem like true h+ speed and i also lose h+ while holding the phone im waiting for this to change with tmobile and thier 1900mhz i hope it does or ill be looking into whats going on with the modem maybe
colorsharpkid said:
i did zedo then s2 unlock then aokp then siyah kernal change forgot to do triangle away then tryed a ota update messed up rom cwm messed up then i just did zedo again to get cwm again then i did aokp again then ran triangle away then i return to stock backup after root then odin flash for stock non root then i took stock and did ota update to 2.3.6 i dont think we will ever get 2.3.7 because google wallet is on 2.3.7 and we cant have it correctly .....on reboot it hangs so i did 3e wipe and cache delete reboot all has been good since batt has been outragously long on uckk7 but after ota update it shows as uckk6 i used a non rooted file maybe u used a rooted return to stock file ?anyway file i used was I777UCKH7-CL503881-No-BL as stated just used pda slot .....idk after all the custom roms theres a distinct feeling in knowing your stock again but have the ability to go and do it all over again i honestly just miss the torch feature and the easy brightness slider on the pulldown
im getting h+ but it doesnt seem like true h+ speed and i also lose h+ while holding the phone im waiting for this to change with tmobile and thier 1900mhz i hope it does or ill be looking into whats going on with the modem maybe
Click to expand...
Click to collapse
Honestly, I have no idea what you just said, or what you're asking.
qwertyaas said:
Honestly, I have no idea what you just said, or what you're asking.
Click to expand...
Click to collapse
Me either, sometimes punctuation goes a long way
Sent from team Pirate! Using Tapatalk 2
colorsharpkid said:
i flashed zedo then used s2 unlock. then i flashed aokp and siyah kernel. I forgot to do triangle away (because I used zedo) and then tried an ota update. This messed up my rom because I couldn't access cwm. then i flashed zedo again to get cwm back. After that i flashed aokp again and ran triangle away.
I then did a return to stock backup after root and an odin flash for stock non root. While on stock i did an ota update to 2.3.6. (some nonsense about 2.3.7 and Google wallet)
.....on reboot it hangs so i did 3e recovery wipe and wiped cache. Reboot has been good since. My batt has been outragously long on uckk7!! But, after an ota update it shows as uckk6 i used a non rooted file, maybe I should have used a rooted return to stock file?
Anyway, the file i used was I777UCKH7-CL503881-No-BL as stated and i just used pda slot .....idk, after all the custom roms theres a distinct feeling in knowing your stock again but have the ability to go and flash custom ROMs all over again. i honestly just miss the torch feature and the easy brightness slider on the pulldown.
im getting h+ but it doesnt seem like true h+ speed and i also lose h+ while holding the phone. im waiting for this to change with tmobile and thier 1900mhz i hope it does or ill be looking into whats going on with the modem maybe
Click to expand...
Click to collapse
Fixed... I think. And "zedo" refers to the sh;t zedomax has on gs2root.
Clay
Team Pirate
Sent from my Buttery Pink SGH-i777
Ok thats where I'm a bit concerned because I ran into an issue before where I was going to do a flash and it choked up on me (mind you it was a pit and tar flash repartition) and it bricked on me but I was able to reflash the same process again once the pc was ok again. I also had on flash that was the 2.3.5 leak but flashed over that and it was fine. Now with that said the phone flashed well, and now it runs generally like it should have in the first place. But my question is did that fluke flash do anything negative to the device behind the scenes that will never be ok again?
creepyncrawly said:
The danger in using those files is in the flashing. If a flash is inadvertantly interrupted or goes bad, then it can hard brick the phone. Once the flash is complete and successful, then you're fine. There are no side effects.
Force closes, and other anomalies can be caused by conflicting data is the system and data partitions. They can also be the result of bugs in the firmware distribution or in any of the various applications. To eliminate the first cause, following all the best proceedures when flashing such as wiping first, etc eliminates the possibility that the fc's are caused by improper proceedure.
With proper installation proceedure, and with a stable firmware, and with robust applications, you should experience little to no fc's.
Click to expand...
Click to collapse
Ok thats where I'm a bit concerned because I ran into an issue before where I was going to do a flash and it choked up on me (mind you it was a pit and tar flash repartition) and it bricked on me but I was able to reflash the same process again once the pc was ok again. I also had on flash that was the 2.3.5 leak but flashed over that and it was fine. Now with that said the phone flashed well, and now it runs generally like it should have in the first place. But my question is did that fluke flash do anything negative to the device behind the scenes that will never be ok again?
Sorry for double post but I wanted to make sure my questions are targeting creepy seeing as this thread is getting a bit off topic.
GalaxyHackster85 said:
Ok thats where I'm a bit concerned because I ran into an issue before where I was going to do a flash and it choked up on me (mind you it was a pit and tar flash repartition) and it bricked on me but I was able to reflash the same process again once the pc was ok again.
Click to expand...
Click to collapse
As far as I know, that would be fine. Someone with dev experience could look into partition sizes on the phone, and see what actually happened. As long as the firmware is functioning correctly, then I would assume the partition sizes are correct.
I also had on flash that was the 2.3.5 leak but flashed over that and it was fine.
Click to expand...
Click to collapse
I guess you didn't get a crippled bootloader. That was the main problem with some of the leaks.
Now with that said the phone flashed well, and now it runs generally like it should have in the first place. But my question is did that fluke flash do anything negative to the device behind the scenes that will never be ok again?
Click to expand...
Click to collapse
I don't know how to look behind the scenes... but I would think your phone is fine.
creepyncrawly said:
As far as I know, that would be fine. Someone with dev experience could look into partition sizes on the phone, and see what actually happened. As long as the firmware is functioning correctly, then I would assume the partition sizes are correct.
I guess you didn't get a crippled bootloader. That was the main problem with some of the leaks.
I don't know how to look behind the scenes... but I would think your phone is fine.
Click to expand...
Click to collapse
OK great info and definitely a relief but just out.of curiousity what are the repercussions of a bad bootloader flash or an improper pit flash? And how would we know that whatever pit or bootloaders flashed weren't for our phone or are corrupted data?
creepyncrawly said:
As far as I know, that would be fine. Someone with dev experience could look into partition sizes on the phone, and see what actually happened. As long as the firmware is functioning correctly, then I would assume the partition sizes are correct.
I guess you didn't get a crippled bootloader. That was the main problem with some of the leaks.
I don't know how to look behind the scenes... but I would think your phone is fine.
Click to expand...
Click to collapse
And trust me I absolutely appreciate all the responses the answer to my last question is all I needed to know to truly understand how the i777 works and functions and I commend you for that. I felt that trying to find all these answers would have been trying to find a needle in a haystack.
Also regarding the repartioning I just wanted to make sure that everything is correct in terms of space. My device is showing only 1.89gb of "Device Memory" at the bout of the "Storage" screen is this normal I though it was higher before but I cant quite remember.
Related
Now I know this question, in general, has been asked a lot. I've literally searched and tried the solutions in other threads, but this phone might be beyond help. I just want to know if someone has another solution as to how to revive this phone. I honestly think my situation is different than most....I downloaded and installed Team Hacksung's ICS 4.0.3 Build 6.1 ROM and I was using it just fine for a couple of months. Everything was working the whole time. Today, I am browsing through my local news station's app and my phone freezes on me! I pulled the battery and restarted the phone. It boots up fine and gets to the startup screen with the time and the screen lock. I did notice right away that the digitizer screen was not responding to my touch because I could not slide my lock over to get into my phone. I tried a few more soft resets and still nothing. I did notice, however, that the soft keys at the bottom did respond to my touch and they blinked and provided haptic feedback, so at this point I'm thinking it shouldn't be a problem with my digitizer. So I took the battery out then put the phone into recovery and wiped data, cache and dalvik. Then I rebooted the phone once again and still no response to touch at the home/lock screen. I then proceeded to try to reflash the same ICS ROM all over again and that's where the problem started. I can get into download mode and I've already tried to load stock froyo and stock gingerbread, but nothing works. My phone will not go past the "Samsung" boot-up screen. I've already tried several other forums' threads on how to recover a bricked Fascinate, but no matter what I try to load with Odin, Heimdall or anything else, my phone won't load past the Samsung screen. I can get into Download mode and that's it. My phone will not go into recovery using the 3-finger method. When I run odin I get a success message each time. I've even tried to heimdall the files individually and even tried to reload the stock kernel. The other problem I am running into is a lot of the links on these sites are all broken so I am unable to get the files I need. Has anyone else ever had this problem?
Edit: P.S. When the phone is off and on the charger, the grey battery shows the "loading" circle (whatever you call it) in the middle of it, but never converts to showing the green bars moving up and down indicating the battery is being charged. The loading circle is also frozen and does not spin.
im dizzy after reading a few sentences lol...check out my guide in the general section.
droidstyle said:
im dizzy after reading a few sentences lol...check out my guide in the general section.
Click to expand...
Click to collapse
Are you referring to http://forum.xda-developers.com/showthread.php?t=1238070?
If so, I just did it and it won't go past "Samsung."
Did you do check repartition and use the atlas pit file? That would be key, I believe, in returning you properly to stock.
Droidstyle's guide has all the working links you'll ever need.
http://forum.xda-developers.com/showthread.php?t=1238070
jawman27 said:
Did you do check repartition and use the atlas pit file? That would be key, I believe, in returning you properly to stock.
Droidstyle's guide has all the working links you'll ever need.
http://forum.xda-developers.com/showthread.php?t=1238070
Click to expand...
Click to collapse
I did check re-partition and yes I did load the atlas pit file. Still nothing.
e
So you tried heimdall? What commands did you do? and what rom?
also which links were dead that you needed?
mvmacd said:
So you tried heimdall? What commands did you do? and what rom?
also which links were dead that you needed?
Click to expand...
Click to collapse
I used heimdall front end to load DI01 files, I didn't use any commands. Also, I was just referring to "Unbrick your samsung fascinate" threads on other websites. A lot of the links I found were outdated or broken.
yea unfortunately not many guides have working links these days...Mine is about the only one left that is kept up to date. Im very suprised a full odin session did not fix your issues. One thing left to try is to odin a older stock package like DL09
Found here:
http://forum.xda-developers.com/showthread.php?t=1526488
Just tried pushing the DL09 file in odin AND in heimdall and neither worked. I still get stuck on the "Samsung" boot and it goes no further. Can't even get into recovery....
I think I truly have a brick...
kinna long shot
but why not try a different PC and a new or different cable.
believe me a faulty cable did me in, a week back and i was sure at the time that my phone is gone, but then it wasn't as bad as the impression i am getting from your description.
all the best with this , and hoping that something solves this issue.
god bless
haoleflip said:
Now I know this question, in general, has been asked a lot. I've literally searched and tried the solutions in other threads, but this phone might be beyond help. I just want to know if someone has another solution as to how to revive this phone. I honestly think my situation is different than most....I downloaded and installed Team Hacksung's ICS 4.0.3 Build 6.1 ROM and I was using it just fine for a couple of months.....
Click to expand...
Click to collapse
I am having a similiar problem now. I was able to odin an older CWM (3.0 blue I got somewhere). From there I mounted usb and loaded ext4_formatter_all.zip. I ran this script and odin'd dh03 and finally got back to stock. That's where I am now.
Hope this helps
kduffman said:
I am having a similiar problem now. I was able to odin an older CWM (3.0 blue I got somewhere). From there I mounted usb and loaded ext4_formatter_all.zip. I ran this script and odin'd dh03 and finally got back to stock. That's where I am now.
Hope this helps
Click to expand...
Click to collapse
I have a blue recovery [3.x, voodoo], here it is if the OP wishes to try it.
[Use Heimdall and select recovery]
cwm3_voodoo-blue.bin http://www.mediafire.com/?4ls06x8gha88vtp
cwm4-bml-i500-fascinate.bin http://www.mediafire.com/?2ny1ql66yh69bn3
35c31418dbe9a9db70de954cdf7369ef cwm3_voodoo-blue.bin
05f3e376ca697fd0fb8700dea05254aa cwm4-bml-i500-fascinate.bin
I threw in an extra 4.x cwm for good measure, lol. [I saved these in a folder in case I ever needed them..I was going to delete the folder since I upgraded to THS ICS rom (build 7.1), but I decided not to delete them for some reason]
it seems OP sounds like he knows what he is talking about, but lets start simple.
Have you tried going all the way back to 100% stock?
In droidstlyes FANTASTIC guide
do section 5, perhaps try with out repartition or the atlas....that has worked for me in the past.
I know on my THS ICS 7.1 build i had a "sleep of death" (wouldnt wake up) and i was lazy and did the 3 finger salute and it would ONLY boot into CWM. a battery pop would have been fine but like i said i was lazy. i had to Odin back to stock in order to re-flash everything. [luckily i had a nandroid from a few days earlier]
Good Luck
Edit: I have never seen or heard of a fassy that CAN get into Download mode and not be recovered to 100% functional.
I'm just thinking out loud here, but here are two things to consider. Perhaps the senior members will comment.
1. Have you considered flashing a different bootloader?
2. Is it possible you have a corrupt stock and/or pit file? Have you tried re-downloading them and giving it another go?
OP, can you post the md5sums of the files, along with the filenames that you are using in Odin/Heimdall?
thanks
Well, I ended up getting a droid bionic from a friend, so I will turn this fassy into a project phone. If I can get it to work I will sell it or keep it for backup. Anyway...
I have not tried the older blue recovery yet. I will try that when I get back to my computer. It seems like I've gone beyond anything I've ever had to try with this phone. I read on one thread that if odin did not work, keep trying heimdall over and over until the phone boots up. I must have tried at least 8 times on one run. It still won't go past samsung screen. I can get into download just fine. No matter how many different cwms I try, I can't get into recovery using the three finger method. Im pretty knowledgeable when it comes to this stuff and I didn't flash the wrong rom or kernel or anything like that. I was running smoothly on an ics rom until my phone froze. I did have it overclocked with ns tools, but not at the time the phone froze. I honestly don't think its hardware related, but merely a glitch in the software or a bad kernel that does not want to come out? I have no clue....help me revive this baby lol...
Sent from my DROID BIONIC using Tapatalk
jawman27 said:
I'm just thinking out loud here, but here are two things to consider. Perhaps the senior members will comment.
1. Have you considered flashing a different bootloader?
2. Is it possible you have a corrupt stock and/or pit file? Have you tried re-downloading them and giving it another go?
Click to expand...
Click to collapse
I've tried different pit files from different threads. Even the one from droidstyle's thread. I've also tried different versions of the following stock files from different "known" and trusted sites: DI01, DL09, ED01, EB01, EH03, CM7, CM9 other ICS roms and different kernels that suit each both voodoo and non voodoo. And excuse my newbness on the terms, but what do you mean by flashing a new bootloader?
Sent from my DROID BIONIC using Tapatalk
haoleflip said:
... but what do you mean by flashing a new bootloader?
Sent from my DROID BIONIC using Tapatalk
Click to expand...
Click to collapse
Bootloaders can be flashed in Odin the same way a ROM can. A bootloader is the rudimentary software that gets the other software up and running. When Glitch's kernel started requiring Gingerbread bootloaders for complete functionality, a lot of us realized that just having GB didn't mean you had GB bootloaders.
http://www.mediafire.com/?fqojvsynkff93hc
Hopefully this link will work. It's certainly worth a try. It doesn't seem like you have much to lose. I'd recommend flashing it the exact same way you do a ROM. There's a bootloader section in Odin, but most people avoid it. Good luck.
Alright I need some help please. First off i need to re-partition my modem and i have no idea how to. Due to constant flashing it screwed something up and i can no longer receive data coverage. Now i looked and looked and i couldn't find anything. So i decided to start a new thread. I need a step by step walk through this will be my first time doing it. And i really don't want to say this cuz i am myself a noob (please no noob's on this one i cant afford another phone). i have had some help by some other people witch was good advice but i have exhausted my options here. I have tried everything from flashing new modems to flashing new ROMS to odin'ing back to stock A.T.T. I'm Stumped i have done absolutely everything i can think of to this phone and still no data. I have the correct apn settings i know that. I'm just completely stumped i dont know what to do.
Phone: Att Samsung Galaxy Note SGH-I717
Android Version: 2.3.6
Okay brother ....I've been digging for gold, And to clarify your issue, you do not need to partition a modem.
You need to repair the device partitions.
Now, this doesn't mean that you should just start changing partitions using CWM or TWRP, or ODIN.
What it does mean, is you need to let Odin do it for you.
I won't take the time to go into PIT files and mapping, as we both would explode from boredom in 10 seconds.
But I will tell you that there are different levels of depth regarding roms and how they flash.
Odin stock roms go pretty deep, but sometimes not deep enough, and Odin will sometimes ignore the PIT remapping function during the flash if the file structure is already present on the device.
That being said, an Odin return to stock is not always successful when seeking a complete restructuring of the device partitions.
However, I have located a rom (factory ICS leak) that contains the entire device partition package, the PIT.IMG Package, baseband, and factory ICS image.
By using this one click Odin file, you will force the device back to factory status using ICS.
This will allow you to push the UCLE2 modem again once you root using CWM.
The ICS root method is slightly different than GB, so check the ICS root info in the super thread before rooting again. This will prevent errors or worse if done incorrectly.
The link below is the most complete package I can find, and includes files not found in the GB Odin.tar.
The file is good. And has been used many times to repair issues we see here.
Take your Time, and read read read....especially when rooting again.
Note: prior to pushing this Odin file, you "MUST" wipe all data and factory reset the device to ensure a "CLEAN" build of the file structure.
And once flashing is complete, follow the root method for ICS... And once rooted, flash the modem by using CWM.
You will need to manually add and save your new APN settings.
Once these steps are complete, you should have a working device with data..
If not, you may have device damage of some kind, which requires a repair of the device by an authorized service center.
I'm uncertain of the software having the ability to damage hardware, but I'm certain it is possible, and you may have this issue.
But if you are willing to try this rom, it will likely help.
Beyond my advice above, I've got nothing more to offer, other than moral support.
Of Course, standard disclaimers apply, and you do this at your own risk ...
Best of luck to you ....g
http://rootzwiki.com/topic/25980-sgh-i717ucle2-official-leak/
alright how do i flash in odin just like a normal .tar file????
nope didnt work
alright man i fill completely stupid 180% i put my girl friends att micro sim in my note it turns out my sim card is bad cuz i got her 4g as soon i i put her sim in but thank u at the same time as i apologize to you cuz i have learned alot from u and u have helped me alot through this issue of mine i fill so dumb right now i truly am sorry for the hassle i have put u through in the last couple of days
Deleted... not a useful comment
Sk84all20 said:
alright man i fill completely stupid 180% i put my girl friends att micro sim in my note it turns out my sim card is bad cuz i got her 4g as soon i i put her sim in but thank u at the same time as i apologize to you cuz i have learned alot from u and u have helped me alot through this issue of mine i fill so dumb right now i truly am sorry for the hassle i have put u through in the last couple of days
Click to expand...
Click to collapse
Dont feel stupid.
We all come here to learn about devices, and the problems that are associated with them.
If nothing else, you've learned many things about Odin, and the importance of taking your time with these things, and about proper setup of the device.
I'm pleased to hear that your device is not damaged, and you are up and running.....g
gregsarg said:
Dont feel stupid.
We all come here to learn about devices, and the problems that are associated with them.
If nothing else, you've learned many things about Odin, and the importance of taking your time with these things, and about proper setup of the device.
I'm pleased to hear that your device is not damaged, and you are up and running.....g
Click to expand...
Click to collapse
agreed, OP my last post wasn't intended to make you feel stupid, I do things exactly like this more than I'd care to admit and I facepalm a lot. I completely forgot to recommend trying different sim chip which is one of the things I always check. My brother gets tired of me stealing his sim card to test my phone haha.
Happy to hear your phone is working!
Thank u all for ur help greatly appreciate it
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
I717 Back from the Dead....AWESOME THANKS!!!
WoW I just about wrote off my I717 after a botched JellyBean upgrade. Came across this file and thought it was too good to be true...but is wasn't...GREAT THANKS!!!
Hello first time rooting this phone. Its a SGH-I777. I used the guide from galaxys2root.com/. At first it didnt work because my computer didnt recongnize my phone. I tried a different computer and it seemed successful until it rebooted. When the phone rebooted it did nothing but stay on the first screen. I still have the ability to get into Odin mode(download mode), but that is it. When i put the phone in download mode and use Odin it allows me to download the "zimage" but after rebooting it is the same exact thing. I have tried the one click root, one click factory restore. Tried restoring it on Kies. and nothing work took it to a store and the guy said he tried but it would stop in the middle of the download the only option i had with him was purchasing a new mother board for $80. Does anyone have a solution that can help me fix my phone.
Before i attempted to root it, it had OS 2.3.6 with kernal 2.6.35.7.
Go to the development section and read the stickies. There you will find stock rooted packages you can flash with Odin.
Sent from my SGH-I777 using xda premium
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
creepyncrawly said:
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
Click to expand...
Click to collapse
the only option that i have is to put the phone in download mode. when i try to download any kernel it reboots and does not go past the booting screen with the triangle.
jmula said:
the only option that i have is to put the phone in download mode. when i try to download any kernel it reboots and does not go past the booting screen with the triangle.
Click to expand...
Click to collapse
You should be able to enter recovery. Hold down all three buttons, vol+ vol- and pwr, continuously until the phone boots into recovery. It could take 10 or 15 seconds or more. If that is unsuccessful, then since you can enter download mode, you will need to flash back to stock, or stock plus root. That is not just a kernel, but the entire package. Please see the links in my sig for instructions.
The dropbox links in the download repository are temporarily suspended until probably Monday night or Tuesday as someone abused and over-downloaded. But the hotfile links still work.
creepyncrawly said:
You should be able to enter recovery. Hold down all three buttons, vol+ vol- and pwr, continuously until the phone boots into recovery. It could take 10 or 15 seconds or more. If that is unsuccessful, then since you can enter download mode, you will need to flash back to stock, or stock plus root. That is not just a kernel, but the entire package. Please see the links in my sig for instructions.
The dropbox links in the download repository are temporarily suspended until probably Monday night or Tuesday as someone abused and over-downloaded. But the hotfile links still work.
Click to expand...
Click to collapse
i Downloaded ''UCLE5 Stock ICS plus Root'' . i placed the phone in download mode started Odin and placed file in PDA. It starts but gets stuck at cache.img
jmula said:
i Downloaded ''UCLE5 Stock ICS plus Root'' . i placed the phone in download mode started Odin and placed file in PDA. It starts but gets stuck at cache.img
Click to expand...
Click to collapse
The next thing I would suggest is to try and flash the UCKH7 full stock package with bootloaders. However, as the dropbox links in the download repository are currently suspended, you will have to download it from SamFirmware. To be able to download, you will need to register for free if you havn't already. Search sgh-i777 in the upper right hand corner of the page, then download the I777UCKH7 version. Let us know if that will flash.
Ok it finally wokred after countless times of changing usb ports. I used the one click recovery. It restroed my phone to 2.3.4 i had 2.3.6. I tried to update by kies to 4.01 and it didnt work. Kies froze. The queestion is how do i safltey root the phone?
jmula said:
Ok it finally wokred after countless times of changing usb ports. I used the one click recovery. It restroed my phone to 2.3.4 i had 2.3.6. I tried to update by kies to 4.01 and it didnt work. Kies froze. The queestion is how do i safltey root the phone?
Click to expand...
Click to collapse
Flash a .tar version of a custom kernel with Odin. I always use an old siyah.tar, but that's just me. There are other methods floating around but that's the quickest and easiest for me. I think there's an old entropy dd.tar around somewhere too. But just flash it through Odin and you're good to go, assuming you flashed one for your version of android. If you just want to get into recovery to flash something this works as well.
There may be links to tar versions of the kernels in creepy's sig I don't remember offhand.
Ok since i do not want to brick my phone again where it is just stuck at the boot loop. I tried looking for ways to root and when i tried some of them my phone went back to the problem it had it the beginning. Should i just call it quits or do you guys have a guide?
jmula said:
Ok since i do not want to brick my phone again where it is just stuck at the boot loop. I tried looking for ways to root and when i tried some of them my phone went back to the problem it had it the beginning. Should i just call it quits or do you guys have a guide?
Click to expand...
Click to collapse
Give up???
I personally don't think flashing a kernel with odin is the best way to root. It increments the flash counter, for one thing, though I'm not sure how many people care about that anymore. I would suggest that you use the stock plus root package to root the phone with odin. See the links in my sig.
Guide... did someone say guide?
Feeling the pain....
creepyncrawly said:
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
Click to expand...
Click to collapse
First, to Creepy....you've been a great resource here and I read a lot of what you post and you got me out of the very jam being discussed here. I made the mistake of trying to root via the galaxys2root.com site (actually, I thought it was a different site...was redirected), got the i9100 screen and a boot loop...couldn't go anywhere. I came back here and found resources eventually unrooting my phone all the way back to 2.3.4, then moved to 2.3.6, then the stock android 4.0.3 which updated to 4.0.4.
But I still want to root (4.0.4 shuts itself down A LOT...more than 4.0.3) and I have a Galaxy note 10.1 with JB 4.1.2 and I LOVE IT! I feel on a mission to get rooted and try out some of the JB roms I see talked about here, but can't seem to find the best way to root. I've heard exynosabuse referenced here (no links to it though) and I don't want to use the wrong one and mess up my phone. I've been reading for weeks here and there's obviously a lot of great material, but I'm not sure which material is critical to understand, and which is "nice to know" but might not even apply, and which material isn't even right. Very frustrating.
Judi
judib said:
First, to Creepy....you've been a great resource here and I read a lot of what you post and you got me out of the very jam being discussed here. I made the mistake of trying to root via the galaxys2root.com site (actually, I thought it was a different site...was redirected), got the i9100 screen and a boot loop...couldn't go anywhere. I came back here and found resources eventually unrooting my phone all the way back to 2.3.4, then moved to 2.3.6, then the stock android 4.0.3 which updated to 4.0.4.
But I still want to root (4.0.4 shuts itself down A LOT...more than 4.0.3) and I have a Galaxy note 10.1 with JB 4.1.2 and I LOVE IT! I feel on a mission to get rooted and try out some of the JB roms I see talked about here, but can't seem to find the best way to root. I've heard exynosabuse referenced here (no links to it though) and I don't want to use the wrong one and mess up my phone. I've been reading for weeks here and there's obviously a lot of great material, but I'm not sure which material is critical to understand, and which is "nice to know" but might not even apply, and which material isn't even right. Very frustrating.
Judi
Click to expand...
Click to collapse
The ExynosAbuse application is the only practical way to root 4.0.4 without changing base. You can download it as an attachment in the OP of the developer's thread, but read through the thread first to understand its limitations and risks.
Alternatively, you could flash 4.0.3 plus root from the development forum. If you choose that route, please read the thread to understand how to install a custom kernel, which is recommended whether you plan to install a custom firmware or not. The custom kernel will contain ClockworkMod Recovery so you can flash the firmware of your choice if you wish.
There are really several routes you could choose. All of them work. Another would be to flash back to stock Gingerbread plus root. For that see my guide How to Flash Custom Binaries Without Ever Incrementing the Flash counter!! (link in sig)
Hmmmmm..
Well, I see that their are many, more experienced than me following this thread and my following comment is not meant to jump on the knowledge train here, but............... I had the same event happen as the orig poster earlier today. I had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII, What I did was go into recovery ,cleared the Dalvik cache and that is all I cleared. Then I re-installed the RR Rom .rar, which I keep on my SD, over everything and rebooted, it came back as it was 4 mins before . All I did after, was do a system restore(only) using Titanium BU. So when I see all the "clear and restore this and that" I started to doubt some of the more experienced than I. My 2 cents is, that, if one does not know EXACTLY ,how to correct an issue,leave it for our more knowledgeable brothers and sisters.
If I am wrong ,please except my appology.
b0bb said:
Well, I see that their are many, more experienced than me following this thread and my following comment is not meant to jump on the knowledge train here, but............... I had the same event happen as the orig poster earlier today. I had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII, What I did was go into recovery ,cleared the Dalvik cache and that is all I cleared. Then I re-installed the RR Rom .rar, which I keep on my SD, over everything and rebooted, it came back as it was 4 mins before . All I did after, was do a system restore(only) using Titanium BU. So when I see all the "clear and restore this and that" I started to doubt some of the more experienced than I. My 2 cents is, that, if one does not know EXACTLY ,how to correct an issue,leave it for our more knowledgeable brothers and sisters.
If I am wrong ,please except my appology.
Click to expand...
Click to collapse
I don't know what you're trying to get across here. Yes, restoring a backup nandroid works. Yes, you can try wiping cache and dalvik to see if it fixes an issue. Yes you can restore apps via titanium backup. All these things are indeed true.
Phalanx7621 said:
I don't know what you're trying to get across here. Yes, restoring a backup nandroid works. Yes, you can try wiping cache and dalvik to see if it fixes an issue. Yes you can restore apps via titanium backup. All these things are indeed true.
Click to expand...
Click to collapse
Well if you did not fully grasp what I was trying to get across,you seemed to get it correct with your statement.
b0bb said:
Well if you did not fully grasp what I was trying to get across,you seemed to get it correct with your statement.
Click to expand...
Click to collapse
And yet you say, "All I did after, was do a system restore(only) using Titanium BU." This may have worked for you, but this is an absolute recipe for disaster, and should not be given as a recommendation.
And further, from what you say, you did not have the "same event happen as the orig poster." Instead you "had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII." This is by far not the same as trying to root with a tool from GalaxyS2Root.
creepyncrawly said:
And yet you say, "All I did after, was do a system restore(only) using Titanium BU." This may have worked for you, but this is an absolute recipe for disaster, and should not be given as a recommendation.
And further, from what you say, you did not have the "same event happen as the orig poster." Instead you "had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII." This is by far not the same as trying to root with a tool from GalaxyS2Root.
Click to expand...
Click to collapse
Hey Bro, I think you think that I am challenging you, trust me I am not and I thank you for correcting me and putting me in my place, which is a bit phone techie challenged, I'll stick to building submarines. Thanks for what you do here.
b0bb said:
Hey Bro, I think you think that I am challenging you, trust me I am not and I thank you for correcting me and putting me in my place, which is a bit phone techie challenged, I'll stick to building submarines. Thanks for what you do here.
Click to expand...
Click to collapse
Not at all. I want people to help others here. I want you to help other here as well. But it is important to post only accurate information. Inaccurate information can cause someone to do the wrong action. So I always correct misinformation.
Okay, before any of the regular contributors here say something nasty to me for asking a question that's been asked and answered, I want you to know that I have spent 2 days reading through -all- xda forums that might even -remotely- relate to my problem, without finding any answers. I also spent several hours searching all the common Android forums elsewhere, as well as, silly sites like Yahoo answers, etc., but have not been able to find the answer to my question. I'm the first to admit that reading the exorbitant amount of information in here causes my brain to short circuit due to all the numbers, versions, etc. It's like reading tax code; use C1.4.6 unless you've submitted b45.1. In that case, use d16.9, unless you've also filed a p32 in the last 2 years...if so, then....blah blah blah.
I love all you cell phone OS gurus and am quite envious of your ability to effortlessly wade through the technology involved in these phones. I wish, wholeheartedly, that I didn't have to ask any questions here because I know how irritated many of you become over people like me asking stupid questions, but I have no where else to turn. Believe me, if I could go elsewhere, I would, for your sake.
I was running 2.3.4, rooted, stock ROM. Froze the system with TB Pro to prevent the upgrade to 2.3.6. Unfroze it. Upgraded. Decided to unroot so I could sell my phone in favor of another. Ran Odin. Ran SuperOneClick. Ahhh...and there's the problem. SOC doesn't work with 2.3.6. So now, I don't know what to do. My phone is half rooted. I can't unroot and I can't reroot. I get the triangle, but TB Pro doesn't work because I'm not rooted, well. sort of not rooted. I guess I'm a little rooted. I don't know what to do next mainly because, every time I find what I think is a solution, I find another source that says, "DON'T DO IT! YOU'LL BRICK YOUR PHONE!" So, here I am, hoping someone will point me in the right direction without chastising me for asking a stupid question. I checked the solution in here and it's great, except, and I quote "Not working for KK6 2.3.6"
Thanks for any help....
So, what you need to do at this point is flash back to stock 2.3.4 using the instructions in the How to prepare your phone ... thread which is a sticky in the general section of this I777 forum. Since you were stock before, and evidently didn't flash any custom firmware, you should be fine flashing the stock distribution with Odin or Heimdall, or using the Odin one-click downloader.
First enter 3e recovery and perform a wipe data/factory reset, then do the Odin or Heimdall flash. The thread has instructions to clear your personal data as well.
Now, you know, I read that post along with all the stickies, about how to return the phone to stock, but I couldn't find any mention of whether or not it worked with a half rooted phone. I didn't want to be one of those people who blindly followed directions not intended for her situation, only to wind up bricking my phone or in a constant boot loop.
Thank you for not criticizing me for my apparent stupidity. I do my best.
Thank you so much for pointing me in the right direction.
tunie said:
Now, you know, I read that post along with all the stickies, about how to return the phone to stock, but I couldn't find any mention of whether or not it worked with a half rooted phone. I didn't want to be one of those people who blindly followed directions not intended for her situation, only to wind up bricking my phone or in a constant boot loop.
Thank you for not criticizing me for my apparent stupidity. I do my best.
Thank you so much for pointing me in the right direction.
Click to expand...
Click to collapse
You can't have a "half rooted" phone, and it wouldn't matter at all anyway since you're going to be booting into download mode in order to flash to stock.
Sent from my Zanpakuto using Getsuga Tensho!
First of all:
Understand what 'ROOT' is.
IT IS ADMINISTRATOR ACCESS TO YOUR DEVICE, NOTHING MORE, NOTHING LESS.
everything for 'root' resides in the OS under the /system partition...which means when you load a new/stock rom on it, everything in /system gets wiped...
root has nothing to do with recovery mode or download mode. you cant be 'half-rooted'. you either have administrator access or you dont, plain and simple.
When I rooted so very long ago, I used SGH-I777_ClockworkMod-Recovery_5.0.2.3 that I downloaded with su-3.0-efgh-signed. At the time, I didn't understand what this was. I only understood that this would root my phone. I didn't want to flash any custom ROM's because, to this day, I really don't understand what a ROM is. Yes, I've read about it. Still don't get it. So, did I flash a custom ROM? As far as I knew, all I did was root so I could use TBPro to backup and freeze, and use LBE to keep my information as private as possible.
<edit> So I've just reread many of your posts. You really are great at explaining this stuff and I thank you for that. It seems, from what I've read, that I can just do a factory reset and the phone should go back to its original state, with 2.3.4. Is that correct?
Thank you, again. I swear I'll be out of everyone's hair in here as soon as is humanly possible.
creepyncrawly said:
So, what you need to do at this point is flash back to stock 2.3.4 using the instructions in the How to prepare your phone ... thread which is a sticky in the general section of this I777 forum. Since you were stock before, and evidently didn't flash any custom firmware, you should be fine flashing the stock distribution with Odin or Heimdall, or using the Odin one-click downloader.
First enter 3e recovery and perform a wipe data/factory reset, then do the Odin or Heimdall flash. The thread has instructions to clear your personal data as well.
Click to expand...
Click to collapse
Pirateghost said:
First of all:
Understand what 'ROOT' is.
IT IS ADMINISTRATOR ACCESS TO YOUR DEVICE, NOTHING MORE, NOTHING LESS.
everything for 'root' resides in the OS under the /system partition...which means when you load a new/stock rom on it, everything in /system gets wiped...
root has nothing to do with recovery mode or download mode. you cant be 'half-rooted'. you either have administrator access or you dont, plain and simple.
Click to expand...
Click to collapse
Thank yes, I understood what root was which is why I did it. I just didn't understand the mechanics of getting there. Perhaps it's the same thing that made pre-med chemistry so difficult for me in college. I could do the work, but didn't get the big picture, so I couldn't build a knowledge base. Anyway, I see the triangle and GT I9100 at boot up, yet I cannot access TB Pro as it states I'm not rooted. So, I guess I did unroot, but didn't go all the way because 2.3.6 doesn't play nice with popular root/unroot apps. Thanks for explaining.
tunie said:
Thank yes, I understood what root was which is why I did it. I just didn't understand the mechanics of getting there. Perhaps it's the same thing that made pre-med chemistry so difficult for me in college. I could do the work, but didn't get the big picture, so I couldn't build a knowledge base. Anyway, I see the triangle and GT I9100 at boot up, yet I cannot access TB Pro as it states I'm not rooted. So, I guess I did unroot, but didn't go all the way because 2.3.6 doesn't play nice with popular root/unroot apps. Thanks for explaining.
Click to expand...
Click to collapse
The triangle has nothing to do with root. It only means you flashed a kernel using Odin.
Sent from my Galaxy Nexus
tunie said:
It seems, from what I've read, that I can just do a factory reset and the phone should go back to its original state, with 2.3.4. Is that correct?
Click to expand...
Click to collapse
No. When you do a wipe data/factory reset, this wipes the data partition but does not touch the system partition. So you will still have whatever firmware you started with, which in your case I believe is 2.3.6, but it will be put back to like it was when it was first installed.
That's why I recommended that you perform a wipe data/factory reset, and then flash the 2.3.4 stock firmware. The factory reset is so that when the new 2.3.4 stock firmware boots up, there will be no problems.
Pirateghost said:
The triangle has nothing to do with root. It only means you flashed a kernel using Odin.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
Well thank you. I give up. Really, I do.
creepyncrawly said:
No. When you do a wipe data/factory reset, this wipes the data partition but does not touch the system partition. So you will still have whatever firmware you started with, which in your case I believe is 2.3.6, but it will be put back to like it was when it was first installed.
That's why I recommended that you perform a wipe data/factory reset, and then flash the 2.3.4 stock firmware. The factory reset is so that when the new 2.3.4 stock firmware boots up, there will be no problems.
Click to expand...
Click to collapse
Well, I actually understand that. Thank you. My concern now is whether or not I flashed a custom ROM. Clockworkmod appears to be a custom ROM, no? If it isn't, I know what to do, thanks to you. If it is a custom ROM, I don't know what to do next.
tunie said:
Well, I actually understand that. Thank you. My concern now is whether or not I flashed a custom ROM. Clockworkmod appears to be a custom ROM, no? If it isn't, I know what to do, thanks to you. If it is a custom ROM, I don't know what to do next.
Click to expand...
Click to collapse
clockwork mod is NOT a custom ROM. clockwork mod is RECOVERY and on this device it is compiled WITH the kernel.
YOU HAVE A CUSTOM/MODIFIED KERNEL
I really dont understand why you dont just follow creepyncrawly's advice and tutorials...you are making this out WAAAAAY harder than it really is.
Pirateghost said:
clockwork mod is NOT a custom ROM. clockwork mod is RECOVERY and on this device it is compiled WITH the kernel.
YOU HAVE A CUSTOM/MODIFIED KERNEL
I really dont understand why you dont just follow creepyncrawly's advice and tutorials...you are making this out WAAAAAY harder than it really is.
Click to expand...
Click to collapse
Just want to insure that I've relayed all the necessary information, correctly. I guess I have. Thank you and I'm sorry I took anyone's time.
tunie said:
Well thank you. I give up. Really, I do.
Click to expand...
Click to collapse
That dreaded yellow triangle show up when you flash a custom (non-stock) kernel. When you flash a stock kernel, it will go away. So... if you flash back to stock like I suggested, it will go away.
Pm me if you need more assistance
creepyncrawly said:
So, what you need to do at this point is flash back to stock 2.3.4 using the instructions in the How to prepare your phone ... thread which is a sticky in the general section of this I777 forum. Since you were stock before, and evidently didn't flash any custom firmware, you should be fine flashing the stock distribution with Odin or Heimdall, or using the Odin one-click downloader.
First enter 3e recovery and perform a wipe data/factory reset, then do the Odin or Heimdall flash. The thread has instructions to clear your personal data as well.
Click to expand...
Click to collapse
Thank you. It worked like a charm. Back to stock. Wonderful. Thank you so much. It wasn't as much a nail-biter as I thought it would be.
Hey guys, has anyone had this issue where your camera refuses to focus on anything further away than say about 6 inches? It can focus just fine close up, but beyond that it's garbage. It goes through the 'animation' of focusing, turns red like i can't focus, and doesn't actually adjust the focus at all. It started in about October and has persisted through 3 or 4 ROMs and various camera APKs.
Has anyone replaced their camera before? I doubt verizon would trade me for a new phone seeing as I've rooted it and flashed a lot of ROMs on it. What should I do? What have you done if this has happened to you? This thread outlines exactly the same thing I'm experiencing and seems as they've concluded it's hardware failure.
Thoughts?
Bump in hopes of someone's experience or advice.
falkon114 said:
Hey guys, has anyone had this issue where your camera refuses to focus on anything further away than say about 6 inches? It can focus just fine close up, but beyond that it's garbage. It goes through the 'animation' of focusing, turns red like i can't focus, and doesn't actually adjust the focus at all. It started in about October and has persisted through 3 or 4 ROMs and various camera APKs.
Has anyone replaced their camera before? I doubt verizon would trade me for a new phone seeing as I've rooted it and flashed a lot of ROMs on it. What should I do? What have you done if this has happened to you? This thread outlines exactly the same thing I'm experiencing and seems as they've concluded it's hardware failure.
Thoughts?
Click to expand...
Click to collapse
I think you're right on the hardware issue. You could always use ODIN to restore the phone back to stock and turn it in for replacement. Verizon can't tell the difference as long as you restore it with the proper factory image. Bad thing is, replacement will probably come locked down with the currently unlockable 4.3 bootloader. At the very least you can restore it with ODIN just to see if it helps the focus issue.
*see below*
Jiggabitties said:
I think you're right on the hardware issue. You could always use ODIN to restore the phone back to stock and turn it in for replacement. Verizon can't tell the difference as long as you restore it with the proper factory image. Bad thing is, replacement will probably come locked down with the currently unlockable 4.3 bootloader. At the very least you can restore it with ODIN just to see if it helps the focus issue.
Click to expand...
Click to collapse
Yeah, i think I might try going back to stock. I wanted to a little while ago just to remember what it was like having a stock system, but I can't find all the files I need. Wasn't there a sticky with Odin and all the right files in one thread? Thought it was stickied, but either I'm blind, or I'm not finding it.
Edit:
Nvm, I'm an idiot
falkon114 said:
Yeah, i think I might try going back to stock. I wanted to a little while ago just to remember what it was like having a stock system, but I can't find all the files I need. Wasn't there a sticky with Odin and all the right files in one thread? Thought it was stickied, but either I'm blind, or I'm not finding it.
Edit:
Nvm, I'm an idiot
Click to expand...
Click to collapse
Yeah sometimes I go back to stock for a day or two just to remind myself why crack flashing is so worth it. But sometimes it's just needed to iron out some bugs. I was having radio issues not too long ago, tried different roms and radios and couldn't fix it. Flashed back to stock, worked like a charm. Haven't had an issue since.
Jiggabitties said:
Yeah sometimes I go back to stock for a day or two just to remind myself why crack flashing is so worth it. But sometimes it's just needed to iron out some bugs. I was having radio issues not too long ago, tried different roms and radios and couldn't fix it. Flashed back to stock, worked like a charm. Haven't had an issue since.
Click to expand...
Click to collapse
Alright, so I remember having some problems when I was first rooting/modifying/Custom recovery-ing...
Couple questions.
1. I use TWRP as my recovery of choice. Can I backup my current ROM as is and store it through there like I normally would when going to a new ROM in case I want to after I go back to stock? Or will going back to stock completely erase all saved ROM images?
If I go back to stock, can I boot into TWRP again like I do now, or is there some process I'll need to follow again to be able to flash my current ROM image? Should I flash the Root66 stock VRALJB 4.1.1 (12/2/12) in the previously linked thread so I can still use custom recovery?
What else should I know? I've become quite good and confident in flashing ROMs, but I'm nervous going back to stock since it seems easier to brick it/lock it down. I remember when I first downloaded and tried installing TWRP, it showed that infamous Yellow Triangle saying the device found unauthorized software and to take it to Verizon, and I remember spending hours trying to flash things to get past that, I don't want to have to deal with that again.
falkon114 said:
Alright, so I remember having some problems when I was first rooting/modifying/Custom recovery-ing...
Couple questions.
1. I use TWRP as my recovery of choice. Can I backup my current ROM as is and store it through there like I normally would when going to a new ROM in case I want to after I go back to stock? Or will going back to stock completely erase all saved ROM images?
If I go back to stock, can I boot into TWRP again like I do now, or is there some process I'll need to follow again to be able to flash my current ROM image? Should I flash the Root66 stock VRALJB 4.1.1 (12/2/12) in the previously linked thread so I can still use custom recovery?
What else should I know? I've become quite good and confident in flashing ROMs, but I'm nervous going back to stock since it seems easier to brick it/lock it down. I remember when I first downloaded and tried installing TWRP, it showed that infamous Yellow Triangle saying the device found unauthorized software and to take it to Verizon, and I remember spending hours trying to flash things to get past that, I don't want to have to deal with that again.
Click to expand...
Click to collapse
Yes, backup your current ROM, if you use the root66 Odin image it should not erase anything you have stored. But to be safe, I would copy your TWRP backup to either an external SD or to your computer for safe keeping. TWRP should survive, as long as you use root66, the others will overwrite recovery and lock the bootloader.
The only reason you should ever get the "Yellow Triangle", or trip any sort of security is if you attempt to install a custom recovery or ROM while the bootloader remains locked, or, you attempted to install the recovery via ODIN.
The most important thing here is, whatever you do, under any circumstance, DO NOT accept any OTA updates. As long as you don't accept the 4.3 OTA, you should be able to keep your TWRP.
You may want to try this flashable version of the stock VRAMC3 before you resort to ODIN http://forum.xda-developers.com/showthread.php?t=2261478
Jiggabitties said:
Yes, backup your current ROM, if you use the root66 Odin image it should not erase anything you have stored. But to be safe, I would copy your TWRP backup to either an external SD or to your computer for safe keeping. TWRP should survive, as long as you use root66, the others will overwrite recovery and lock the bootloader.
The only reason you should ever get the "Yellow Triangle", or trip any sort of security is if you attempt to install a custom recovery or ROM while the bootloader remains locked, or, you attempted to install the recovery via ODIN.
The most important thing here is, whatever you do, under any circumstance, DO NOT accept any OTA updates. As long as you don't accept the 4.3 OTA, you should be able to keep your TWRP.
You may want to try this flashable version of the stock VRAMC3 before you resort to ODIN http://forum.xda-developers.com/showthread.php?t=2261478
Click to expand...
Click to collapse
Thanks. I tried the last link there, and am back to relatively stock and still have the camera issue.
I'm excited for the 4.3 update to be hacked since I would really, really like multi-window and SNote capabilities on my 4.3 ROM, but who knows when that might happen.
Thanks for you help man!
falkon114 said:
Thanks. I tried the last link there, and am back to relatively stock and still have the camera issue.
I'm excited for the 4.3 update to be hacked since I would really, really like multi-window and SNote capabilities on my 4.3 ROM, but who knows when that might happen.
Thanks for you help man!
Click to expand...
Click to collapse
Glad I could help in any way. Bummer about your camera.