Related
hi all
Forgot to charge my EVO 3D (CDMA) and battery completely drained. Even after using another fully charged battery my phone goes to bootloop - just shows the HTC logo and reboots again and again. Here is what I have:
hboot : 1.5 (S-ON)
radio : 1.06.00.1216
ota : 2_17.651_5
(I am using this phone in India activated on Reliance)
As the phone doesn't boot I can't access it thru adb to give command 'adb reboot bootloader'
I can get bootloader by pressing vol_down+power
When I run the 2_17.651_5 RUU (exe) from my computer while phone is on fastboot, it completes successfully without errors. But still on reboot it just stays at the htc screen and reboots (guess it's becoz stock kernel not getting flashed as the phone is s-on)
kindly help to get back my phone boot again
thanks and regards
ananth
R.I.P
Sent from my HTC.EVO.3D.Xda Premium
Don't listen to the previous guy. Try using fastboot OEM lock and then ruuing. Or, try getting freezas stock kernel and extracting the boot.IMG and flashing it thru fastboot. Or, you could use fastboot flash recover recovery.IMG to get twrp or clockworkmod and do a superwipe and try flashing a new Rom. There are tons of options if you still have fastboot.
Sent from my HTC popout book.
jdeoxys said:
Don't listen to the previous guy. Try using fastboot OEM lock and then ruuing. Or, try getting freezas stock kernel and extracting the boot.IMG and flashing it thru fastboot. Or, you could use fastboot flash recover recovery.IMG to get twrp or clockworkmod and do a superwipe and try flashing a new Rom. There are tons of options if you still have fastboot.
Sent from my HTC popout book.
Click to expand...
Click to collapse
Thanx for responding. As I mentioned earlier,I have already relocked and RUU'd the exe file,but though it runs without errors doesn't solve problem. Again as it is s-on doesn't permit to flash boot.img. Though I am able to flash twrp recovery, not able to get into recovery from fastboot. Thanks again, really appreciate your help.
ananth001 said:
Thanx for responding. As I mentioned earlier,I have already relocked and RUU'd the exe file,but though it runs without errors doesn't solve problem. Again as it is s-on doesn't permit to flash boot.img. Though I am able to flash twrp recovery, not able to get into recovery from fastboot. Thanks again, really appreciate your help.
Click to expand...
Click to collapse
You don't need to relock once you unlock the HTC way. Just unlock the phone then flash via fastboot the boot.img and then ruu if you want.
Sent from my PG86100 using Tapatalk
megabiteg said:
You don't need to relock once you unlock the HTC way. Just unlock the phone then flash via fastboot the boot.img and then ruu if you want.
Click to expand...
Click to collapse
thanks. extracted boot.img from freeza's kernel and flashed from fastboot after unlocking. But still doesnt solve problem. Can you give me a link for boot.img
Pleassssssse HELP !!!!!!
I have the exactly the same problem, a full reboot result in boot loop, and can not fix it by now.
I guest the phone is rooted before OTA, so OTA can not flash kernel successfully because the wrong signature, and the phone will not boot because the wrong kernel.
I have tried ruu, fastboot boot recovery.img and etc, all failed.
The key point is that, the phone is rooted and you tried OTA. HTC OTA must have a stupid bug, it can not recovery from a partial update, or automatically roll back becasuse of the partial update, dem!
Please have a look at the guide/flashing notes in my signature. If u r unlocked u are likely not entering recovery correctly.
If u are trying to flash the Ruu u have to be locked or relocked. If u cant boot to android, run the xhausx's full Ruu zip from bootloader.
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
Please have a look at the guide/flashing notes in my signature. If u r unlocked u are likely not entering recovery correctly.
If u are trying to flash the Ruu u have to be locked or relocked. If u cant boot to android, run the xhausx's full Ruu zip from bootloader.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
1) flashed RUU (exe) after relocking - flash completed without errors
2) ran xhausx's full RUU zip (PG86IMG_2.17.651.5.zip) from bootloader (could get into bootloader by pressing volum_up + power button. adb cannot connect to phone (as phone does not boot), to run 'adb rebooot bootloader')
But still doesn't solve problem and phone keeps rebooting, apparently kernel has not flashed properly.
Please help !!!1
ananth001 said:
1) flashed RUU (exe) after relocking - flash completed without errors
2) ran xhausx's full RUU zip (PG86IMG_2.17.651.5.zip) from bootloader (could get into bootloader by pressing volum_up + power button. adb cannot connect to phone (as phone does not boot), to run 'adb rebooot bootloader')
But still doesn't solve problem and phone keeps rebooting, apparently kernel has not flashed properly.
Please help !!!1
Click to expand...
Click to collapse
You need to use the RUU 2.17 exe after you relock your phone... Then flash a copy of CWM or TWRP on it..
Then adb
fastboot boot recovery.img
Wipe and flash whatever you want
Just noticed u said India & carrier is reliance. Why would u be using a Sprint USA CDMA Ruu? Shouldn't u be using a GSM RUU version?
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
Just noticed u said India & carrier is reliance. Why would u be using a Sprint USA CDMA Ruu? Shouldn't u be using a GSM RUU version?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
I wonder the same thing all I saw was 1.5
Sent from my PG86100 using xda premium
mpgrimm2 said:
Just noticed u said India & carrier is reliance. Why would u be using a Sprint USA CDMA Ruu? Shouldn't u be using a GSM RUU version?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Reliance has both CDMA as well as GSM service in India. Mine is a Reliance CDMA MDN.
thanks and regards
reaper24 said:
You need to use the RUU 2.17 exe after you relock your phone... Then flash a copy of CWM or TWRP on it..
Then adb
fastboot boot recovery.img
Wipe and flash whatever you want
Click to expand...
Click to collapse
Yeah , as I mentioned earlier, I also tried using the RUU 2.17 exe after relocking (RUU completed successfully without errors) , and flashed twrp recovery from fastboot . But still it's a no go.
(Again would like to repeat that I can't boot into bootloader from adb - adb cannot connect as phone doesn't android boot. I get into fastboot by pressing vol_down + power)
thanks all for your responses and help, hope you all will continue guiding me till I get this done.
ananth001 said:
Yeah , as I mentioned earlier, I also tried using the RUU 2.17 exe after relocking (RUU completed successfully without errors) , and flashed twrp recovery from fastboot . But still it's a no go.
(Again would like to repeat that I can't boot into bootloader from adb - adb cannot connect as phone doesn't android boot. I get into fastboot by pressing vol_down + power)
thanks all for your responses and help, hope you all will continue guiding me till I get this done.
Click to expand...
Click to collapse
Have you tried to just run the RUU like you said boot turn debug on .... Then go to hboot flash your recovery...
Then fastboot boot recovery.img.
This should work I have unrooted my phone 3 times already in the past month Trial and Error on my part adb always found my phone...
I am tryin to figure out what is going wrong on the last part with TWRP...
Since you said after you do that it was a no go? What happend ? Adb should still be working since you just flashed the recovery...
Anyways I hope you get it solved man I am tryin to figure this problem out.
Do you have a rom already ready to be flashed on your SD card?
Problem is, since i’m not able to android boot I can't reboot bootloader from adb, as I can't connect adb without the phone normal booting. When I boot it just stays at the HTC white screen.
I have flashed twrp recovery from fastboot, but when I give command 'fastboot boot <twrpxxxxx>.img it just boots back to the HTC splash screen
You can go back to complete stock if you rename the RUU file PG86IMG.zip and load onto the root of sd card. Get into bootloader with [power+volume down] and it will automatically detect and load the zip file. This can only be done if you are relocked. I did this in order to get the latest update. After you get back to stock you can unlock and root again.
Android Cowboy said:
You can go back to complete stock if you rename the RUU file PG86IMG.zip and load onto the root of sd card. Get into bootloader with [power+volume down] and it will automatically detect and load the zip file. This can only be done if you are relocked. I did this in order to get the latest update. After you get back to stock you can unlock and root again.
Click to expand...
Click to collapse
As I mentioned in earlier post, have tried flashing PG86IMG.zip from bootloader, but still phone doesn't boot properly and is in a bootloop.
You've used the following file and done these exact steps and allowed the phone to boot to full stock OS? (assuming 2.17.651.5 is correct version)
OPTION 2 - RUU.zip info:
I prefer the .exe version but xHausx’s “FULL” PG86IMG_2.17.651.5.zip may work for you (must be renamed PG86IMG.zip). Make sure you have plenty of battery/charge left!
- (XDA) Xhausx full PG86IMG.zip RUU images (651.5 zips)
PG86IMG_2.17.651.5.zip http://forum.xda-developers.com/showpost.php?p=21593454&postcount=564
MD5: 8F82C2D8F98C077AF775266064BACB5D
From Scrosler's zip Directions : http://forums.androidcentral.com/htc-evo-3d-rooting-roms-hacks/107641-how-return-100-stock-all-versions.html
Scrosler; said:
USE ONLY FOR EMERGENCY PURPOSES. THIS OVERWRITES EVERYTHING!!!!
**THIS WILL RETURN YOU TO FRESH OUT OF THE BOX**
You will not need any special drivers loaded, etc...
1.Download the stock ROM ZIP image from here: and rename it "PG86IMG.zip"
2.Copy it to SD Card
3.Reboot phone into hboot mode by holding volume down and then press power.
Keep volume down held until you boot into hboot mode.
4.In hboot mode the phone will scan the SD card with the image. Once it finds it will ask you if you want to update. Press "Power" to update.
5.Wait.... For a while. When it gets to "system" it will loop a few times. Its quite nerve wracking actually but after about 5 or 6 times it will complete.
6.Once the entire flash is complete it will prompt you to "press power to reboot." Press power and your phone will reboot to 100% stock ROM.
Click to expand...
Click to collapse
I have a phone to return and would like to know how to remove Amon Ra Recovery I used the All-In-One Kit to install the recovery but i want to go back to stock and re-lock the bootloader ASAP can someone please help me I need to send this phone back. BTW what does the Stock option under kernel do would it return it back to stock recovery thanks.
flash the GB ruu and your phone will be stock but you will still have to relock the bootloader
Noob at Flashing RUU
Sorry for asking but I'm a noob at flashing but where do i get the stock RUU and how and where do i get it and flash it. Is there any links on how to do this. Would going to recovery and unzipping a file do the trick in my SD card. Not sure if i hit the spot on this but thanks for the help.
Got It
I figured it out thank you
JD164 said:
I figured it out thank you
Click to expand...
Click to collapse
If you could help me. What did you figure out and how did you do it?
Stock Recovery
I don't think you need to run an ruu to get the stock recovery back. search and you should be able to find a download link to get the stock recovery and you can just flash that with adb/fastboot.
the1Doctor said:
If you could help me. What did you figure out and how did you do it?
Click to expand...
Click to collapse
For stock recovery and latest ruu firmware: http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
Once you download, copy to root of micro sdcard, and rename to PH98IMG.zip
Then boot into bootloader, and it should detect it and flash automatically. note it has to flash twice. You must say yes, It will look like it rest and restarted, but it's normal.
Don't forget to delete or rename it after your done or
Sent from my Rezound using xda app-developers app
mvmacd said:
For stock recovery and latest ruu firmware: http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
Once you download, copy to root of micro sdcard, and rename to PH98IMG.zip
Then boot into bootloader, and it should detect it and flash automatically. note it has to flash twice. You must say yes, It will look like it rest and restarted, but it's normal.
Don't forget to delete or rename it after your done or
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
If you are on a stock ROM, all you have to do to replace amon ra is to do "fastboot flash recovery [stock recovery filename].img "
Then if you want to run amon ra again, just do "fastboot boot recovery [amon ra recovery].img"
I am running a rooted Rez with Amon Ra Recovery which is otherwise stock ICS. I have tried three times to install the latest Global OTA. Each time the install fails after an attempt is made to install the downloaded package. The phone reboots into Amon Ra and I see the following messages.
Installing Update
Wrong Task ID 221384E: Error in /cache/fumo/OTAPkg.zip
Status 1
Installation Aborted
Anyone know what is happening? Thanks in advance for the help.
You need the stock recovery to do update....
Sent from my SCH-1605 / Galaxy Note 2 using Tapatalk v 2.4.13
more
Found out hard way: you can't just be on the last official RUU (3.14.605.12) to get the new update from Verizon.
ALSO dammit you have to have previously taken the small February update to 3.14.605.13. The update's name mentions
605.13 in its title. The problem is that you can't get that little update anymore!!!!
Those of us with only 605.12 may have to wait until the next RUU is issued. Gripes me.
You realise someone posted the full ruu zip in this thread. You don't have to get it from software update thing
Sent from my ADR6425LVW using xda app-developers app
tried that
still looks for 605.13 and craps out with an error message!
how to solve that
In February, Flyhalf205 uploaded the 605.13 OTA.zip in another thread.
The one I could not find anywhere.
You take that little one, rename it update.zip, and flash in hboot.
Do a factory reset and it'll boot up.
Then you can get the current OTA from Verizon.
13 zip is here
13 zip
http://forum.xda-developers.com/showthread.php?p=40819479
Sent from my SCH-1605 / Galaxy Note 2 using Tapatalk v 2.4.13
Here is the FIX
michaelbsheldon said:
still looks for 605.13 and craps out with an error message!
Click to expand...
Click to collapse
Download the PH98IMG.zip in the Attachment and put it on your SD Card
1. Flash the above file in Hboot and delete it after done flashing
2. Put the new update.zip on to your SD card.
3. Reboot into Bootloader and choose Recovery
4. It will flash the new update.
5. Download the new.global.firm.PH98IMG.zip from HERE ,rename it to PH98IMG.zip and flash it in Hboot to get the latest Hboot, Radio, ......
6. Done
Just to Be Sure
I managed to get the OTA getting me to 605.13. So if I want to get to 605.14, do I just get the new firmware zip file, rename it, place it onto the sd card, and install it in HBoot and I am good to go? Just checking to be sure. Thanks.
rjr1049 said:
I managed to get the OTA getting me to 605.13. So if I want to get to 605.14, do I just get the new firmware zip file, rename it, place it onto the sd card, and install it in HBoot and I am good to go? Just checking to be sure. Thanks.
Click to expand...
Click to collapse
I just tried but no go. It said there is no update script or something. Any solution?
nbhnohome said:
Download the PH98IMG.zip in the Attachment and put it on your SD Card
1. Flash the above file in Hboot and delete it after done flashing
2. Put the new update.zip on to your SD card.
3. Reboot into Bootloader and choose Recovery
4. It will flash the new update.
5. Download the new.global.firm.PH98IMG.zip from HERE ,rename it to PH98IMG.zip and flash it in Hboot to get the latest Hboot, Radio, ......
6. Done
Click to expand...
Click to collapse
Is this the same process if the device is s-on?
nissmo66 said:
Is this the same process if the device is s-on?
Click to expand...
Click to collapse
You can only use the official update with your bootloader locked and a non modified stock rom or you need to wait for a new RUU to come out.
mjones73 said:
You can only use the official update with your bootloader locked and a non modified stock rom or you need to wait for a new RUU to come out.
Click to expand...
Click to collapse
-or- s-off if s-off and on the latest ota it doesn't matter if you are locked or unlocked. You will need to flash a custom recovery and su when the ruu is done but the update will complete. You can also downgrade the bootloader (hboot) back to a modified one such as vinyl freaks if and only if s-off.
Sent from my Nexus 7 using Tapatalk HD
dottat said:
-or- s-off if s-off and on the latest ota it doesn't matter if you are locked or unlocked. You will need to flash a custom recovery and su when the ruu is done but the update will complete. You can also downgrade the bootloader (hboot) back to a modified one such as vinyl freaks if and only if s-off.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
If you're s-off, you can flash the firmware on it's own and not have to touch the recovery...
mjones73 said:
If you're s-off, you can flash the firmware on it's own and not have to touch the recovery...
Click to expand...
Click to collapse
True also.....
Sent from my Nexus 7 using Tapatalk HD
to get stock recovery open the zip take the recovery and use fastboot and flash recovery.img right guys?
dcasun said:
to get stock recovery open the zip take the recovery and use fastboot and flash recovery.img right guys?
Click to expand...
Click to collapse
yes... put the recovery.img in the same directory as your fastboot command and from a command prompt (at the same directory as your fastboot.exe) issue the command fastboot flash recovery recovery.img
dottat said:
yes... put the recovery.img in the same directory as your fastboot command and from a command prompt (at the same directory as your fastboot.exe) issue the command fastboot flash recovery recovery.img
Click to expand...
Click to collapse
place the recovery.img in platform tools
type fastboot flash recovery recovery.img
and lock the bootloader
run the update
reunlock the bootloader
flash custom recovery
and done
dottat said:
yes... put the recovery.img in the same directory as your fastboot command and from a command prompt (at the same directory as your fastboot.exe) issue the command fastboot flash recovery recovery.img
Click to expand...
Click to collapse
I was on 605.13 stock ICS, rooted and with Amon Ra recovery. I grabbed the 605.12 recover and flashed it and relocked the boot loader. I have tried multiple times to run the OTA (both pulling from Verizon and by putting it on the SD card). It keeps failing with the same 'Wrong Task ID' error mentioned by OP. I even wiped the SD Card, did clear storage from stock recovery, a couple of factory resets to no avail.
Can someone help? Is it possible that the 605.13 OTA a month or so ago didn't install properly since I had Amon Ra. In Software it shows I am at 605.13 so I doubt that. But would you suggest running the 605.13 Update.zip manually and then try to pull the OTA?
misalies said:
I was on 605.13 stock ICS, rooted and with Amon Ra recovery. I grabbed the 605.12 recover and flashed it and relocked the boot loader. I have tried multiple times to run the OTA (both pulling from Verizon and by putting it on the SD card). It keeps failing with the same 'Wrong Task ID' error mentioned by OP. I even wiped the SD Card, did clear storage from stock recovery, a couple of factory resets to no avail.
Can someone help? Is it possible that the 605.13 OTA a month or so ago didn't install properly since I had Amon Ra. In Software it shows I am at 605.13 so I doubt that. But would you suggest running the 605.13 Update.zip manually and then try to pull the OTA?
Click to expand...
Click to collapse
You will need to relock the bootloader then run the 605.12 RUU and let that boot up and not modify anything then you will get the 605.13 update first and then the latest after that, that is how I got the update and had no problems at all.
Hi.How do I install the files
plz help mee
http://forum.xda-developers.com/showthread.php?t=2376707&nocache=1
@ckpv5 Could you please help us here ?
mintyx said:
@ckpv5 Could you please help us here ?
Click to expand...
Click to collapse
You can't install the OTA as it will fail as you don't have the files it needs to patch.
But, you can manually update your hboot with it.
I'm busy at the moment with work commitment... I'll try to find time tonight to write the How-To. There are two ways of doing it.
ckpv5 said:
You can't install the OTA as it will fail as you don't have the files it needs to patch.
But, you can manually update your hboot with it.
I'm busy at the moment with work commitment... I'll try to find time tonight to write the How-To. There are two ways of doing it.
Click to expand...
Click to collapse
@ckpv5 Thank you. Thank you sooooo much. Appreciate it .
@musician_it thanks for the thread man.
ckpv5 said:
You can't install the OTA as it will fail as you don't have the files it needs to patch.
But, you can manually update your hboot with it.
I'm busy at the moment with work commitment... I'll try to find time tonight to write the How-To. There are two ways of doing it.
Click to expand...
Click to collapse
Thank you Thank you Thank you Thank you * 100000 Thank you:good::good::good::good::good:
updating hboot - method I
Hopefully this will work for you as it works for me.
As promised, here is the method I.
What you need :
1. your Unlock_code.bin that you received from hTC previously when you first unlocked your device. If you lose it, apply for a new one at htcdev.com
2. stock recovery - you can use the one that I posted here : http://forum.xda-developers.com/showpost.php?p=39658620&postcount=1
3. firmware.zip - download the OTA for your CID from http://forum.xda-developers.com/showthread.php?t=2376707 and extract the OTA.zip, you will find the firmware.zip inside the extracted folder
4. Rename the firmware.zip to PM66IMG.zip
(Note : it is best you enable extension name in your PC so you can see the extension .zip clearly so you won't have something like PM66IMG.zip.zip which is wrong)
5. Make a nand backup of your current ROM with ICS TWRP recovery (I recommend TWRP)
The Method
1. Put the PM66IMG.zip on your sdcard (not in any folder, just on sdcard)
2. Make sure the usb debugging is enabled (check Settings - Developer options - USB debugging is ticked)
3. Reboot to bootloader/fastboot and connect to PC (you should see fastboot usb in red)
4. Install the stock recovery either use the stock recovery installer that you downloaded earlier or use fastboot command fastboot flash recovery recovery.img
5. Still in fastboot mode/bootloader - relock your bootloader with command fastboot oem lock
6. Your DX will reboot to bootloader and you will see "RELOCKED" on bootloader and maybe "security warning" under it, just select reboot to bootloader again, you should have "RELOCKED" only.
7. Press power once to go to hboot mode
8. Then you will see the hboot seeking the PM66IMG.zip and will ask "Do you want to start update ?" .. select yes by pressing volume up button.
9. Sit back and relax, let it complete. Once it complete, it will ask to press power to boot, so press power button to boot.
10. Done .. your hboot now updated. (Your device may end up in bootloop if your previous ROM is ICS - so I suggest to flash a JB ROM before you do the procedure)
Additional
1. Reboot to bootloader.
2. Re-unlock your bootloader with the Unlock_code.bin using command fastboot flash unlocktoken Unlock_code.bin
3. You will see the unlock page - select yes to unlock (volume up)
4. Your device will reboot - either it will be in bootloop if your previous ROM is ICS ROM or it boots normally if your previous ROM is JB.
5. Put your device in bootloader again
6. Flash a JB TWRP Recovery
7. Restore your nand backup that you made earlier (If that is an ICS ROM, you need to flash an ICS boot.img before that).
8. Or flash any of your favorite ROM.
So try this Method I first. I will tell the method II which is more complicated if this is not working. If the CID is correct, there is no reason for this not to work.
@ckpv5 Thank you so much . My hboot is now 1.25.
But I forgot to flash jelly bean rom. It is in my sd card. But whenever I tried to go to the bootloader. It just go to the HBOOT, and it is asking me to update again. How do I flash JB rom now .
I was too late to read this
(Your device may end up in bootloop if your previous ROM is ICS - so I suggest to flash a JB ROM before you do the procedure)
Click to expand...
Click to collapse
Select no when it ask (volume down) or take out the sdcard and put in a card reader and delete the file
Yeah, but you should add an extra step for flashing the JB ROM so that people using this guide will know when to do it (I am already on jb hboot, I could update with OTA). I am sure that there are a many people who are first trying the steps without finishing the reading before.
ckpv5 said:
Select no when it ask (volume down) or take out the sdcard and put in a card reader and delete the file
Click to expand...
Click to collapse
@ckpv5 removed the sd card and delete the zip file. Working wonderfully. Thank you so much :good::good::good::good:
mintyx said:
@ckpv5 removed the sd card and delete the zip file. Working wonderfully. Thank you so much :good::good::good::good:
Click to expand...
Click to collapse
:good::good:
No problem
I should have helped when @supersonictt first asked the question but I was away and expect someone else will assist.
So.. enjoy your new hboot and new ROMs and I guess there is no need for Method II
My hboot is now 1.25.
But Now how did you flash the jelly bean?
Thanks
musician_it said:
My hboot is now 1.25.
But Now how did you flash the jelly bean?
Thanks
Click to expand...
Click to collapse
@musician_it It is already mentioned in ckpv5's post. I am pasting it here for you.
Additional
1. Reboot to bootloader.
2. Re-unlock your bootloader with the Unlock_code.bin using command fastboot flash unlocktoken Unlock_code.bin
3. You will see the unlock page - select yes to unlock (volume up)
4. Your device will reboot - either it will be in bootloop if your previous ROM is ICS ROM or it boots normally if your previous ROM is JB.
5. Put your device in bootloader again
6. Flash a JB TWRP Recovery
7. Restore your nand backup that you made earlier (If that is an ICS ROM, you need to flash an ICS boot.img before that).
8. Or flash any of your favorite ROM.
Click to expand...
Click to collapse
---------- Post added at 02:16 PM ---------- Previous post was at 02:12 PM ----------
@ckpv5 Thank YOU man. The method has worked for me and @musician_it. :good:
So i can install only jelly bean rom?
Right?
musician_it said:
So i can install only jelly bean rom?
Right?
Click to expand...
Click to collapse
No you can install ICS roms too, you only need to change something if the rom maker didn't do it already:
http://forum.xda-developers.com/showthread.php?t=2213663
But most roms have that already changed (Like ShadowDX, and MyONEdx), just look in the OP
GtrCraft said:
No you can install ICS roms too, you only need to change something if the rom maker didn't do it already:
http://forum.xda-developers.com/showthread.php?t=2213663
But most roms have that already changed (Like ShadowDX, and MyONEdx), just look in the OP
Click to expand...
Click to collapse
Good work:good:
Thanks:good:
My DNA is moonshined S-off, CWM, and WAS running like a champ. I've probably put 15 different ROMs on this, and I've never had a problem. I searched and couldn't find anything quite like the problem I'm having. In short, I flashed a new rom yesterday (NuSense 4.4.2) and now I can't get past the white HTC screen or the hboot/fastboot screen. If I select "recovery", CWM flashes on the screen for a few seconds then the phone reboots (to the HTC screen). USB'ing to my PC yields little, it installs all the drivers (except the MTP driver), but never shows up in device manager. I'm pretty much lost at this point. Did I kill it?
greatmoose said:
My DNA is moonshined S-off, CWM, and WAS running like a champ. I've probably put 15 different ROMs on this, and I've never had a problem. I searched and couldn't find anything quite like the problem I'm having. In short, I flashed a new rom yesterday (NuSense 4.4.2) and now I can't get past the white HTC screen or the hboot/fastboot screen. If I select "recovery", CWM flashes on the screen for a few seconds then the phone reboots (to the HTC screen). USB'ing to my PC yields little, it installs all the drivers (except the MTP driver), but never shows up in device manager. I'm pretty much lost at this point. Did I kill it?
Click to expand...
Click to collapse
No you don't, you need ROM Firmware Required: Latest hboot, firmware and radio,
Recovery:
USE TWRP .6 Beta
finanandroid said:
No you don't, you need ROM Firmware Required: Latest hboot, firmware and radio,
Recovery:
USE TWRP .6 Beta
Click to expand...
Click to collapse
OK, how do I get all that on the device if I can't get to anything (recovery, storage, etc...)?
greatmoose said:
OK, how do I get all that on the device if I can't get to anything (recovery, storage, etc...)?
Click to expand...
Click to collapse
First if you can access the bootloader /fastboot from there you can flash anything with ADB working updated.
Second: is good that you give more specific state of your phone so any kind guy from xda(beside me) can help you wisely
Ex; Did you took the VZW OTA 4.2.2 or are you GSM user?, access your bootloader and reply what you see there
S-off we know but are you lock or unlocked, hboot 1.33 xxxx ,Radio 1.308 xxx, or what OK
Look likely you have a old Hboot problem with the wrong Recovery as well non- compatible with Nunsense 4.4.2
http://forum.xda-developers.com/showthread.php?t=2629211
please read requirement to flash this Rom. here you can download the twrp beta and superuser to keep root.
here useful information http://forum.xda-developers.com/showthread.php?t=2612740
Latest radio 1.01.01.1112 Latest Hboot 1.54.0000 (3.06.605.4 OTA hboot )
I got TWRP installed (I think), but when I try to access it, it just flashes, then reboots.
finanandroid said:
First if you can access the bootloader /fastboot from there you can flash anything with ADB working updated.
Second: is good that you give more specific state of your phone so any kind guy from xda(beside me) can help you wisely
Ex; Did you took the VZW OTA 4.2.2 or are you GSM user?, access your bootloader and reply what you see there
S-off we know but are you lock or unlocked, hboot 1.33 xxxx ,Radio 1.308 xxx, or what OK
Look likely you have a old Hboot problem with the wrong Recovery as well non- compatible with Nunsense 4.4.2
http://forum.xda-developers.com/showthread.php?t=2629211
please read requirement to flash this Rom. here you can download the twrp beta and superuser to keep root.
here useful information http://forum.xda-developers.com/showthread.php?t=2612740
Latest radio 1.01.01.1112 Latest Hboot 1.54.0000 (3.06.605.4 OTA hboot )
Click to expand...
Click to collapse
I believe that's exactly what happened. I had CWM installed instead of TWRP, then flashed NuSense. I was coming from CM11, radio 1.01.01.1112, hboot 1.33.4444. Not sure if it's locked or unlocked (how do I check?)
greatmoose said:
I got TWRP installed (I think), but when I try to access it, it just flashes, then reboots.
Click to expand...
Click to collapse
do you have a back up or any other Rom in your phone, so you can restore or flash other rom
and start from the scratch, also you didn't check what hboot/radio you have. turn off your phone
then hold together power and volume rocker down. to access the bootloader.
my Break is up, (working) back to you later on, but the more info you give is a + so other member may can help you
for now if not, Ill be back with you later.
finanandroid said:
do you have a back up or any other Rom in your phone, so you can restore or flash other rom
and start from the scratch, also you didn't check what hboot/radio you have. turn off your phone
then hold together power and volume rocker down. to access the bootloader.
my Break is up, (working) back to you later on, but the more info you give is a + so other member may can help you
for now if not, Ill be back with you later.
Click to expand...
Click to collapse
radio 1.01.01.1112
hboot 1.33.4444
There should be a couple of ROMs in my storage, but I can't access them. I can access the bootloader screen (fastboot usb, bootloader, reboot, reboot bootloader, power down) but I can't get to the roms.
greatmoose said:
I believe that's exactly what happened. I had CWM installed instead of TWRP, then flashed NuSense. I was coming from CM11, radio 1.01.01.1112, hboot 1.33.4444. Not sure if it's locked or unlocked (how do I check?)
Click to expand...
Click to collapse
If you used Moonshine to root before you are unlocked. you need to update u HBoot to 1.54.0000 version
or flash this Rom with those radios and current hboot http://forum.xda-developers.com/showthread.php?t=2626050 this is android 4.4.2/ sense 5.5 Stable*
read Second post I did with those radios
---------- Post added at 12:16 PM ---------- Previous post was at 12:09 PM ----------
greatmoose said:
radio 1.01.01.1112
hboot 1.33.4444
There should be a couple of ROMs in my storage, but I can't access them. I can access the bootloader screen (fastboot usb, bootloader, reboot, reboot bootloader, power down) but I can't get to the roms.
Click to expand...
Click to collapse
may you can push the Rom
Download your rom and put it into your fasboot directory* on your PC
Boot into recovery and choose "install" then "install zip from sideload"
It should say to now type into command promt "adb sideload romfilename.zip"
It then loads it, and you just hit flash after it loads.
adb push rom_name.zip /sdcard/0
finanandroid said:
If you used Moonshine to root before you are unlocked. you need to update u HBoot to 1.54.0000 version
or flash this Rom with those radios and current hboot http://forum.xda-developers.com/showthread.php?t=2626050 this is android 4.4.2/ sense 5.5 Stable*
read Second post I did with those radios
---------- Post added at 12:16 PM ---------- Previous post was at 12:09 PM ----------
may you can push the Rom
Download your rom and put it into your fasboot directory* on your PC
Boot into recovery and choose "install" then "install zip from sideload"
It should say to now type into command promt "adb sideload romfilename.zip"
It then loads it, and you just hit flash after it loads.
adb push rom_name.zip /sdcard/0
Click to expand...
Click to collapse
Problem is, i have no way to flash anything.
Flash TWRP first
To flash the Recovery:
Place the file in your fastboot/adb directory on your computer.
Put the device in fastboot mode:
(Volume down and power until menu appears, select fastboot using power button)
Connect the device to the computer
The image is easily installed via an unlocked bootloader with the following command:
Code:
fastboot flash recovery imagename.img
For example, I provided a recovery img named twrp.img
So you would type:
fastboot flash recovery twrp.img
---------- Post added at 12:32 PM ---------- Previous post was at 12:27 PM ----------
greatmoose said:
Problem is, i have no way to flash anything.
Click to expand...
Click to collapse
you have to connect the phone via usb, first boot in to bootloader/ fastboot
then connect the phone/ select fastboot usb
finanandroid said:
Flash TWRP first
To flash the Recovery:
Place the file in your fastboot/adb directory on your computer.
Put the device in fastboot mode:
(Volume down and power until menu appears, select fastboot using power button)
Connect the device to the computer
The image is easily installed via an unlocked bootloader with the following command:
Code:
fastboot flash recovery imagename.img
For example, I provided a recovery img named twrp.img
So you would type:
fastboot flash recovery twrp.img
---------- Post added at 12:32 PM ---------- Previous post was at 12:27 PM ----------
you have to connect the phone via usb, first boot in to bootloader/ fastboot
then connect the phone/ select fastboot usb
Click to expand...
Click to collapse
Tried that, says twrp installed successfully, but when I try to enter recovery, twrp flashes then the phone reboots.
greatmoose said:
Tried that, says twrp installed successfully, but when I try to enter recovery, twrp flashes then the phone reboots.
Click to expand...
Click to collapse
Flash Hboot 1.54.0000 (3.06.605.4 OTA hboot) then you can RUU
Download new hboot and put in the pc adb folder
1.54.000 hboot.zip
Rename to: PL83IMG.zip
adb reboot bootloader
fastboot oem rebootRUU
fastboot flash zip PL83IMG.zip
fastboot reboot-bootloader
finanandroid said:
Flash Hboot 1.54.0000 (3.06.605.4 OTA hboot) then you can RUU
Download new hboot and put in the pc adb folder
1.54.000 hboot.zip
Rename to: PL83IMG.zip
adb reboot bootloader
fastboot oem rebootRUU
fastboot flash zip PL83IMG.zip
fastboot reboot-bootloader
Click to expand...
Click to collapse
Awesome. Where can i get them?
soul ichnolud
finanandroid said:
Flash Hboot 1.54.0000 (3.06.605.4 OTA hboot) then you can RUU
Download new hboot and put in the pc adb folder
1.54.000 hboot.zip
Rename to: PL83IMG.zip
adb reboot bootloader
fastboot oem rebootRUU
fastboot flash zip PL83IMG.zip
fastboot reboot-bootloader
Click to expand...
Click to collapse
Nevermind, found them. I'll let you know what happens. Thanks for all your help!
OK, the hboot update installed (1.33.0001), now it says ****TAMPERED**** ****UNLOCKED****.
OK, I can get into TWRP now (Yay!), but I have nothing to flash. THe device won't show up in windows, so adb doesn't work, How can I send a ROM to the phone without adb?
greatmoose said:
OK, I can get into TWRP now (Yay!), but I have nothing to flash. THe device won't show up in windows, so adb doesn't work, How can I send a ROM to the phone without adb?
Click to expand...
Click to collapse
OK, first you flashed other hboot no the one I instructed to , but its ok man let try this: get into TWRP tap advanced then File Manager scroll
down look for Data>media...if you had any Rom should be there look in legacy or 0 then move that rom to sdcard so twrp see it and you can flash it. got it
Can you tap Install in twrp and browse to sd card?
IT'S ALIVE!!!! All my thanks! You're awesome!
greatmoose said:
IT'S ALIVE!!!! All my thanks! You're awesome!
Click to expand...
Click to collapse
you're welcome! Glad you got it man! :victory: