Help please,,my S2 dont boot and when i put it in CWM Recovery its say the following:
ClockworkMod Recovery v4.0.0.2
E:cant mount /cache/recovery/command
E:cant mount /cache/recovery/log
E:cant open /cache/recovery/log
E:cant mount /cache/recovery/last_log
E:cant open /cache/recovery/last_log
Im on stock gingerbread with CF-Root Kernel
Thanks in advance for your help
skull69pr said:
Help please,,my S2 dont boot and when i put it in CWM Recovery its say the following:
ClockworkMod Recovery v4.0.0.2
E:cant mount /cache/recovery/command
E:cant mount /cache/recovery/log
E:cant open /cache/recovery/log
E:cant mount /cache/recovery/last_log
E:cant open /cache/recovery/last_log
Im on stock gingerbread with CF-Root Kernel
Thanks in advance for your help
Click to expand...
Click to collapse
reboot to recovery
When i reboot to recovery it stays on the galaxy s II GT-I9100 screen with the yellow triangle
Sent from my GT-N7000 using xda premium
skull69pr said:
When i reboot to recovery it stays on the galaxy s II GT-I9100 screen with the yellow triangle
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
You might need to upgrade your CWM recovery, flash a gingerbread compatible custom kernel
Swyped from my Galaxy SII
Did that,,, same,,, dont reboot,,,stays in galaxy yellow triangle screen
Sent from my GT-N7000 using xda premium
Now,,,i cant even get into recovery
Sent from my GT-N7000 using xda premium
skull69pr said:
When i reboot to recovery it stays on the galaxy s II GT-I9100 screen with the yellow triangle
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
It is kernel panic mode. You should flash proper kernel to your rom or even entire firmware with Odin. You could use the same as installed now on your phone. 1 file firmware will not wipe your phone, but if it will stack on boot than you should wipe cache and dalvik or even wipe/factory reset.
--
i9.0.1.3k galaxy imperator
skull69pr said:
Now,,,i cant even get into recovery
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
which Siyah kernel did you flash?
3.x and 4.x, is for ICS , 2.x is for gingerbread
Swyped from my Galaxy SII
Jokesy said:
which Siyah kernel did you flash?
3.x and 4.x, is for ICS , 2.x is for gingerbread
Swyped from my Galaxy SII
Click to expand...
Click to collapse
i flash speedmod k16-11 for gb
im going to flash siyah and see what happen
Update- i flash siyah via odin,,the phone reboot and it says:
deleting Cryption Meta Data
installing package,,,blah,blah,blah
successfully installed package
--copying media files...
and it stop there
SirKunon said:
It is kernel panic mode. You should flash proper kernel to your rom or even entire firmware with Odin. You could use the same as installed now on your phone. 1 file firmware will not wipe your phone, but if it will stack on boot than you should wipe cache and dalvik or even wipe/factory reset.
--
i9.0.1.3k galaxy imperator
Click to expand...
Click to collapse
firmware first or kernel??
Kernel first. If this will not help than full rom.
i9.0.1.3k galaxy imperator
If you still can't fix your problem, please visit this thread: http://forum.xda-developers.com/showthread.php?t=1457458
Good luck
Swyped from my Galaxy SII
Related
Hi there,
I've got a huge problem.
After having tried the official Samsung ROM (2.3.5, I9100XXKI3), I rooted my phone using CF-ROOT 4.2. That works perfectly.
Then, I've downloaded a custom ROM.
I've put the .zip file at the root of my phone.
Then, I have rebooted in recovery mode.
I've done a data/cache/dalvik wipe.
I've done a "install zip from card", using the zip file of the rom.
The script says everything is allright... but after restart my phone stays blocked at the same point : the Samsung Galaxy SII logo with the yellow triangle.
Nothing more.
I've tried 4 different custom roms and it does the same with all (Cyanogenmod, MIUI, Litening, Revolution).
With the Cyanogenmod, it's a bit different : i have the same issue but it also seems to loop reboot...
The only ROM that works is the official Smasung ROM that I install using Odin.
Any idea of what I can do to fix this ?
Any idea of what I'm doing bad ?
Many thanks
PS : I would love to install a MIUI.
PS : I've justed tried again to install MIUI, and now, after rebooting after the installation from CWM, the phone goes to Recoverymode by itself and says :
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't mount /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't mount /cache/recovery/last_log
Try Cyanogen. I've heard a few things about installing from zip twice. After it's finished the first time, install from zip again. No guarantees off course.
You could try flashing an earlier official Rom first then cfroot then Custom Rom.
Read somewhere that you need to factory reset if you're downgrading which is possible since you're going from 2.3.5.
Sent from my GT-I9100 using XDA App
you may flash the rom twice. or u can downgrade to official 2.3.4 (KH3) via Odin and then flash other custom rom u like
First of all, many thanks yo you all.
@meranto : Already tried and the only thing it does is a boot loop.
@aceofclubs : Good idea. That's what I'm trying right now.
@Henrywcy81 : flash twice : see above. Downgrade : again, good idea
Any advice on which Kernel I should use ? Could it be a kernel problem ?
Many thanks guys.
Wow I've just tried to downgrade and WOW.
Never had so much error messages.
I loose root but everything crashes just after the first Samsung Galaxy SII logo.
I have a lot of error messages saying that the phone can't mount partitions.
Sounds bad :S
Did you flash the downgrade with Odin?
Sent from my GT-I9100 using XDA App
Rescue
Boot recovery
Mounts and storage
Format SD card system data cache dalvik
Power off
Download mode
Flash stock rom via Odin
jje
http://forum.xda-developers.com/showthread.php?t=1291282
firstly flash XXKI3 by repartitioning. i had this.
mariosraptor said:
http://forum.xda-developers.com/showthread.php?t=1291282
firstly flash XXKI3 by repartitioning. i had this.
Click to expand...
Click to collapse
Many thanks. It now works !
you are very welcome!!!
vanquishV12 said:
Many thanks. It now works !
Click to expand...
Click to collapse
i have same problem i cant flash custom rom only stock (KI3), always got boot loop, than i can only flash ki3 with repartition (pit file)..
have you installed at the end custom rom, and how (downgrade rom)?
After flashing with pit file flash xwki8 one file. Then cf-root 4.3 ki8.
Boot into recovery and flash whatever you want.
Sent from my GT-I9100 using xda premium
i tried, but i got boot loop again..
P.S. after fashing xwki8, basbend was KI3 and build number was KI3, only karnel was changed (xwki8)..
Hi, I have tried to method posted and nothing, I guess It has to do something with the pit file, I guess is messing and changing the way the phone is partitioned, and CWM Recovery cant find and mount the partitions.
The question is why some people manage to install custom roms? and other no?
I'm going to do it again, restore to stock KI3 with pit file (re-partitioning), modem and CSC and see if I can manage to install DarkyROM2_KI3_Base.
At this point I'm rooting my phone with cf-root 4.2.
Nope, it din't work!!!!! Any Suggestions?????
PDA: CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar
MODEM: MODEM_I9100XXKI3_REV_02_CL1062028.tar
PIT: u1_02_20110310_emmc_EXT4
CSC: GT-I9100-CSC-MULTI-OXAKI3.tar
CF-ROOT as PDA:CF-Root-SGS2_XX_OXA_KI3-42-v4.2-CWM4
Custom ROM: DarkyROM2_KI3_Base
What i'm doing wrong????
Im sorry for creating a new thread but i have little problem with my phone.
Yeah its my fault that i´ve checked the pit file in case trying to install beta ics rom
XXKP8 and after that my phone comes with an error. That error is CWM. Witch can´t install any rom. Phone is not compleately dead i can boot to original rom after flashing that through odin but thats it.. only original rom.. no 3rd party rom ..
i dont know how to fix this.. i´ve trying to search everywhere but it seems that i am the only one who have this problem.
so im begging you guys... open your file of mercy and help me
CWM-based Recovery v5.0.2.3
E:Can´t mount /cache/recovery/command
E:Can´t mount /cache/recovery/log
E:Can´t open /cache/recovery/log
E:Can´t mount /cache/recovery/last_log
E:Can´t open /cache/recovery/las_log
1) Flash the old bootloaders from this thread: http://forum.xda-developers.com/showthread.php?t=1075278 using odin
2) Flash a stock rom from that thread using odin
3) Flash root kernel of your choice using odin
Thank you so much. That finaly helped !
n3kobe said:
Thank you so much. That finaly helped !
Click to expand...
Click to collapse
NP, beware ICS bootloaders, lots of people have got themselves in a pickle because of them.
well.. it seemed that everything is alright again. but it is not.. well maybe partialy i dunno. i´ve flashed KL1 stock rom from that thread everything was going well exept 3G wont work. Then, i´ve flashed syah´s kernel for CWM through odin. again.. everything ok. But then i´ve flashed CM7 through CWM5 -> restart -> kernel panic. i tought that CM7.zip has kernell inside so that wasnt be a problem.. but something is wrong.. i´ve trying install miui.. same thing.. but with another kernell. With syah´s, it was ok because syah´s is compatible with miui but CM7 is not ? its like a merry-go-round
so im asking again please... what is wrong ?
Did you flash the modem as well?
There seems to be some random problems with the newest SiyahKernel and CM7, do the following
Put CM7 zip in internal sd card
Flash any CWM kernel
Flash CM7 zip
Reboot to recovery
Flash CM7 zip again
Wipe data/cache/dalvik cache
hmm interesting.. phone is trying to boot but it loops at trying to boot
triangle triangle triangle ... :>
Bootloop thread
been there, done that, doest not solve anything
only going bat to stock rom and then i can continue again:
flashing stock XXKK5 -> ok
flashing siah -> boots -> ok
flashing cm7 nightly 116 -> kernell panic
flashing cf-root -> flashing cm7 nightly 116 -> "boot loop"
again -> "boot loop" (not boot logo but triangle keeps going)
flashing CWM recovery 5.0.2.3.
CWM-based Recovery v5.0.2.3
E:Can´t mount /cache/recovery/command
E:Can´t mount /cache/recovery/log
E:Can´t open /cache/recovery/log
E:Can´t mount /cache/recovery/last_log
E:Can´t open /cache/recovery/las_log
now what ? :/
Back to/stay on stock then :-|
ok so i camed with an solution !
im a total jackass trying to install ICS - > screwing my phone with a .pit file -> only leaving me option of siahs kernell with MIUI or original stock or everything what works witch siahs or cf-root. classic CWM recovery kernell from codeworks just do not seem to work
Did you use the .pit when you flashed ICS?
Yep -> fail
n3kobe said:
Yep -> fail
Click to expand...
Click to collapse
Did you tick repartition when you flashed ICS with the pit? If so see below
edit removed as i am comparing the pits
i think yes.
n3kobe said:
i think yes.
Click to expand...
Click to collapse
The pits seem to be identical, so I dont think thats the problem, you *could* try flashing a GB rom with a GB pit, but of cause if something happens mid flash you could hardbrick your phone, at your own risk, and I don't even think it would help.
Apart from that I am all out of ideas..
nwm thank you for all your help i think ill be just using stock or miui or i will w8 for cm 9
I seem to have a similar problem. Originaly Running stock 2.3.4 i flashed ICS 4.0.3 following a guide on or linked at samfirmware which insisted we should tick repartition and add .pit file. I tried flashing without the repartition + .pit but didnt work so ticked the box and added the .pit file, flashed pass ICS runs.
Every other rom i flashed never required repartition + .pit now i am only able to run 2.3.6 or ics but nothin below 2.3.6 if i flash anything else i get the same as op.
Hi guys, I recently flashed Clockwork Recovery but I've got slightly problem. I can't get back into my phone now as it just hangs at the samsung logo and I can get into clockwork recovery however I've got another issue:
E:Can't mount /cache/recovery/log
E:Can't open /cache/recover/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recover/last_log
E:Can't mount /sdcard
Any ideas anyone? I have no idea whats gone wrong with it. I've got a Samsung Galaxy S2 UK sim free handset I9100 so don't understand where it could have gone wrong and now I can't flash anything to it and don't know where to get a stock rom for use with odin.
Please help!
Thanks in advance
Dave
You can get stock roms at samfirmware.com
Thanks but...
Cheers for that dude! The issue I have though is once I'm done with that does that mean I can't get CWM Recovery to work on my handset, if thats the case then that means I can flash any custom roms. Also could it be a problem with the bootloader? I unlocked the bootloader on my Galaxy Nexus but don't know if I should have done that on my S2.
Any ideas as I'm still canny new to this and not sure with the S2.
Thanks again!
Try just Chainfire's CF-Root, it is just a kernel package that roots the phone, adds busybox and CWM.
Type in *#1234# into your phone dialer, and download the package that meets the PDA section in that menu. In my case, it is I9100XWLP3, so I would download Chainfire's LP3 Root. When you have found your PDA, post it back here for the correct download.
Chris.
Also samsung doesn't lock your bootloader, there's no need to unlock
Sent from my Transformer Prime TF201 using XDA Premium App
Before doing anything just wipe Cache and Dalvik partitions and check the error exist or not,
I had same issue and above solved it for me
How did you install cwm? Did you use cf root
Sent from my GT-I9100 using xda premium
Hi, I'm new to these forums and need some help!
I just rooted my Samsung Galaxy S3 i9300 yesterday using the Odin ver 1.85 tool and it was working perfectly all day. I was doing a little research as to how you can use custom ROMs and so I decided to give it a try.
I downloaded the ROM Manager application and flashed the ClockworkMod Recovery that comes with it before attempting to flash a ROM. I then proceeded to download the CyogenMod ver. 9.1.0 that comes with ROM Manager as well. I made sure to make a backup of my current ROM on both my internal and external SD cards and then went ahead and flashed the Cyogen ROM using the application. I also chose to wipe the data/factory reset before confirming.
After the process was done, the phone rebooted with the Cyogen logo and it was all working fine for the first 2 minutes. Then all of a sudden while going through the new ROM's screens, my phone rebooted showing the "Samsung GALAXY S III GT-I9300" message and with a little red "!" mark on the top left. It stays like that all the time. I tried turning the power off and taking out the battery but it always goes back to that screen immediately after.
I'm able to go into the ClockworkMod recovery by holding the volume up+power+home buttons but I see the following lines below:
ClockworkMod Recovery v6.0.3.2
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
I've tried wiping the cache, wipe data/factory reset, and wiping the dalvik cache options but it doesn't seem to work. I also tried flashing the ROM again from the SD card, but when I try to do it, it says "E: Can't mount /sdcard/". Same thing with my external SD card.
When I plug the phone to my computer, it doesn't seem to detect my device either. Is my phone bricked and will I have to get a new one if this is the case?
I tried to do some searching and this thread seems to be similar to what I'm facing but not quite as the methods suggested by the users are unknown to me: http://forum.xda-developers.com/showthread.php?t=1500947
I appreciate any help I can get!
Zernell said:
Hi, I'm new to these forums and need some help!
I just rooted my Samsung Galaxy S3 i9300 yesterday using the Odin ver 1.85 tool and it was working perfectly all day. I was doing a little research as to how you can use custom ROMs and so I decided to give it a try.
I downloaded the ROM Manager application and flashed the ClockworkMod Recovery that comes with it before attempting to flash a ROM. I then proceeded to download the CyogenMod ver. 9.1.0 that comes with ROM Manager as well. I made sure to make a backup of my current ROM on both my internal and external SD cards and then went ahead and flashed the Cyogen ROM using the application. I also chose to wipe the data/factory reset before confirming.
After the process was done, the phone rebooted with the Cyogen logo and it was all working fine for the first 2 minutes. Then all of a sudden while going through the new ROM's screens, my phone rebooted showing the "Samsung GALAXY S III GT-I9300" message and with a little red "!" mark on the top left. It stays like that all the time. I tried turning the power off and taking out the battery but it always goes back to that screen immediately after.
I'm able to go into the ClockworkMod recovery by holding the volume up+power+home buttons but I see the following lines below:
ClockworkMod Recovery v6.0.3.2
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
I've tried wiping the cache, wipe data/factory reset, and wiping the dalvik cache options but it doesn't seem to work. I also tried flashing the ROM again from the SD card, but when I try to do it, it says "E: Can't mount /sdcard/". Same thing with my external SD card.
When I plug the phone to my computer, it doesn't seem to detect my device either. Is my phone bricked and will I have to get a new one if this is the case?
I tried to do some searching and this thread seems to be similar to what I'm facing but not quite as the methods suggested by the users are unknown to me: http://forum.xda-developers.com/showthread.php?t=1500947
I appreciate any help I can get!
Click to expand...
Click to collapse
put your phone to download mode and flash rom with odin.
That should fix it.
austibor said:
put your phone to download mode and flash rom with odin.
That should fix it.
Click to expand...
Click to collapse
How can he do that?
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
How can he do that?
Click to expand...
Click to collapse
power off the phone than hold power + menu + down key till you get to download mode.
than connect USB to pc run odin and flash a rom of your choice.
austibor said:
power off the phone than hold power + menu + down key till you get to download mode.
than connect USB to pc run odin and flash a rom of your choice.
Click to expand...
Click to collapse
Thanks this post should be a sticky .
jje
Thanks for the responses!
I tried to flash the i9300 firmware using Odin as suggested but it failed during the process (attached screen shot). I tried doing this 2 or 3 times but I always got the FAIL message. Is there anything else I can try doing before giving up on my phone? Maybe I flashed the wrong file?
Zernell said:
Thanks for the responses!
I tried to flash the i9300 firmware using Odin as suggested but it failed during the process (attached screen shot). I tried doing this 2 or 3 times but I always got the FAIL message. Is there anything else I can try doing before giving up on my phone? Maybe I flashed the wrong file?
Click to expand...
Click to collapse
Hmm not an expert here but can you try to check the "Re-Partition" checkbox
take your sdcard out, it should not matter but just in case
austibor said:
Hmm not an expert here but can you try to check the "Re-Partition" checkbox
take your sdcard out, it should not matter but just in case
Click to expand...
Click to collapse
If you're not an expert, please don't make suggestions.
Re-partition bricks the s3. I understand its semi bricked now but there is no return from re-partition.
Sent from my GT-I9300 using Tapatalk 2
---------- Post added at 07:45 AM ---------- Previous post was at 07:43 AM ----------
Zernell said:
Thanks for the responses!
I tried to flash the i9300 firmware using Odin as suggested but it failed during the process (attached screen shot). I tried doing this 2 or 3 times but I always got the FAIL message. Is there anything else I can try doing before giving up on my phone? Maybe I flashed the wrong file?
Click to expand...
Click to collapse
You're system partition looks broken. What info does it say on the screen in download mode
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
You're system partition looks broken. What info does it say on the screen in download mode
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
When I enter download mode on the top left it says:
Odin Mode
Product Name: GT-I9300
Custom Binary Download: Yes (1 counts)
Current Binary: Custom
System Status: Custom
austibor said:
Hmm not an expert here but can you try to check the "Re-Partition" checkbox
take your sdcard out, it should not matter but just in case
Click to expand...
Click to collapse
Expert sir you are a positive danger .
jje
Zernell said:
When I enter download mode on the top left it says:
Odin Mode
Product Name: GT-I9300
Custom Binary Download: Yes (1 counts)
Current Binary: Custom
System Status: Custom
Click to expand...
Click to collapse
OK we can rule out SDS at least....
The firmware you have tried to flash is the leak. Try the official firmware from http://forum.xda-developers.com/showthread.php?t=1646610
It might help, not sure
mikep99 said:
The firmware you have tried to flash is the leak. Try the official firmware from http://forum.xda-developers.com/showthread.php?t=1646610
It might help, not sure
Click to expand...
Click to collapse
Sorry if this is a dumb question, but how do I know which firmware out of the ones from the list on that thread should I use? Does it matter?
Zernell said:
Sorry if this is a dumb question, but how do I know which firmware out of the ones from the list on that thread should I use? Does it matter?
Click to expand...
Click to collapse
Doesnt matter - try EME2 that's in the first post.
You will probably end up with an ODIN fail again but its worth trying...
mikep99 said:
The firmware you have tried to flash is the leak. Try the official firmware from http://forum.xda-developers.com/showthread.php?t=1646610
It might help, not sure
Click to expand...
Click to collapse
As expected, it failed even after using the suggested firmware. Does this mean the phone is completely bricked now and nothing can be done?
Did you fix your phone?
Maybe you should consider this?
http://forum.xda-developers.com/showthread.php?t=1840030
austibor said:
Did you fix your phone?
Maybe you should consider this?
http://forum.xda-developers.com/showthread.php?t=1840030
Click to expand...
Click to collapse
Great advice only trouble its a totally different phone you are linking to .
jje
JJEgan said:
Great advice only trouble its a totally different phone you are linking to .
jje
Click to expand...
Click to collapse
Yeap you are right, I should have stated that!
The article states that you should user root66 and Linked boot chains for your device.
This sounds like it might help with OP problem.
He for sure has wrong kernel ... that is similar enough to work but screw is mounting point. Try change kernel with odin ... then flash with odin twrp or philz recovery and flash a proper rom
Sent from my GT-I9300 using xda premium
I have the same problem and still searching the forums for an answer.
does your problem solved? does this flashing and kerneling and odining worked? because I think the internal memory in baked!!
My Samsung Galaxy S3 GT-I9300 Freeze On Samsung Glowing Logo and when trying to factory reset it shows, E: failed to mount /efs (invalid argument)
When i use Odin to restore a stock firmware it successful but its still not pasting Samsung Glowing Logo.
PLEASE HELP!!!!! MY FRIENDS.:
custom recovery
Alton56 said:
My Samsung Galaxy S3 GT-I9300 Freeze On Samsung Glowing Logo and when trying to factory reset it shows, E: failed to mount /efs (invalid argument)
When i use Odin to restore a stock firmware it successful but its still not pasting Samsung Glowing Logo.
PLEASE HELP!!!!! MY FRIENDS.:
Click to expand...
Click to collapse
Install siyah kernel and see what happens I had a similar problem on my s2 when installed flash a custom rom like cm11 and then go back to stock
AndroidNerdz said:
Install siyah kernel and see what happens I had a similar problem on my s2 when installed flash a custom rom like cm11 and then go back to stock
Click to expand...
Click to collapse
How do i go about to install Siyah Kernel on my GT-I9300?
Alton56 said:
How do i go about to install Siyah Kernel on my GT-I9300?
Click to expand...
Click to collapse
On Google search up siyah Kernel I9300
Flash it via Odin
Then mount storage to computer and put cm11 on it
And flash it
Please hit that thank button
Why My Samsung Galaxy S3 GT-I9300 Freeze On Samsung Glowing Logo
AndroidNerdz said:
On Google search up siyah Kernel I9300
Flash it via Odin
Then mount storage to computer and put cm11 on it
And flash it
Please hit that thank button
Click to expand...
Click to collapse
It Still Doesn't Work Is There Any Other Way You Could Help Me???? When i do It i get a purple glowing icon and its not pasting there .. then i try to put the cm11 on it and when i try to install it from my SD card It still shows the message E: Fail to mount/ efs/ invalid argument.
Alton56 said:
My Samsung Galaxy S3 GT-I9300 Freeze On Samsung Glowing Logo and when trying to factory reset it shows, E: failed to mount /efs (invalid argument)
When i use Odin to restore a stock firmware it successful but its still not pasting Samsung Glowing Logo.
PLEASE HELP!!!!! MY FRIENDS.:
Click to expand...
Click to collapse
There is a small chance that the efs folder might be corrupted.
You can install a custom recovery like Philz Touch and try to do factory reset from there.
My Samsung Galaxy S3 GT-I9300 Freeze On Samsung Glowing Logo
RazorMC said:
There is a small chance that the efs folder might be corrupted.
You can install a custom recovery like Philz Touch and try to do factory reset from there.
Click to expand...
Click to collapse
Yeah i installed it and it work but when i do the factory reset it still not pasting the Samsung Glowing Logo...
Format the efs and restore your efs backup, if you don't have a backup then you'll need to pay for a repair.
Sent from my GT-I9300 using Tapatalk
Thanks man
boomboomer said:
Format the efs and restore your efs backup, if you don't have a backup then you'll need to pay for a repair.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
I really appreciate your help thanks again..