Related
Hello Everyone,
While trying to Flush my SGS2 with a cooked room using Odin my device got DEAD.
This is what happened exactly:
1- After successful room flushing the SGS2 got rebooted but unfortunately it did not loaded the room.(Stuck in boot screen_Black screen with Samsung Galaxy S2)
2- i waited several hours for the galaxy to let go the boot screen but it wont.!!
3- i pulled the battery then put the galaxy back to download mode and retried flushing the room but it was giving the same result.
4- unfortunately after doing the same several times the device got DEAD..
Now:
- I cant power on my galaxy
- When connecting it to PC nothing Happen (Odin does not show any device connected)
- Plugin in the charger, The galaxy got heated.
I am just thinking i have missed up the partition table, please mistake me if i am wrong.
Or any one can help in this.
Note:
- the same happened with my two devices.
- Since Galaxy s2 is not released in my country i bought them from outside the country with no warranty.
Any one can help.???
Thanking you in advance for the support.
Think you flushed it down the spout .
Can the phone go to download mode Have you a download recovery jig .
No phone power on at all either circuit boards blown or battery dead .
jje
thanks fro the reply.
The phone cant go to download mode.!!! no display at all when pressing the power button.
Either no display when charging the phone, it only get heated.!!!
I have heared about the download recovery jig.
My question shall i use the same Resistor (301K Ohm) for the galaxy s2???? i believe this is used for Galaxy s1.
Yes its the same .
jje
gamshid said:
thanks fro the reply.
The phone cant go to download mode.!!! no display at all when pressing the power button.
Either no display when charging the phone, it only get heated.!!!
I have heared about the download recovery jig.
My question shall i use the same Resistor (301K Ohm) for the galaxy s2???? i believe this is used for Galaxy s1.
Click to expand...
Click to collapse
yes the 301k resistor does work on the SGS2 aswell.
Just fro your information i have just checked with one of my friends he is having the same issue.
He used the same resistor 310K on both SGS2 & SGS1, unfortunately it only worked with SGS1.
Any way i will try it on my device and come back soon.
thanks again
http://forum.xda-developers.com/showthread.php?t=1068522
same jig for SGS2 .
jje
Damn, yeh i got the same problem, my galaxy s2 is dead. Won't power on and screen is completely blank. So i'm guessing a jig wont help it, unless proven otherwise.
The same thing happened on first boot of my first SGS2. I pressed the Power Button, played for like 2 mins with TW and then the phone stuck and switched itself off.
Long story short, I couldn't get it to switch on again, so I sent it to service and the response was it had a faulty motherboard.
So I think you should return it. My 2 cents.
stormrain said:
The same thing happened on first boot of my first SGS2. I pressed the Power Button, played for like 2 mins with TW and then the phone stuck and switched itself off.
Long story short, I couldn't get it to switch on again, so I sent it to service and the response was it had a faulty motherboard.
So I think you should return it. My 2 cents.
Click to expand...
Click to collapse
Thanks for the reply.
Unfortunately as i mentioned, i bought it without warranty.
Will wait for any other tips.
Can you guide me where to get the motherboard online.
thanks again.
i have heared about some think called Riff-Box.!!
Check this in Youtube
http://www.youtube.com/watch?v=x-w_NvaENcI&feature=related
And this in eBay
http://cgi.ebay.com/RIFF-BOX-JTAG-1...720069?pt=PDA_Accessories&hash=item4155677e05
Any one can advice on this.?
Thanks
Hmm my post Just been deleted.!!!!!
Any way, do any one have any idea about the Riff-Box tool.
well it help me in this
regards
HI
I have just noticed whenever i connect my SGS2, my computer pop ups a notification searching for a driver but it disconnect in seconds and the pc cant continue searching for the driver.
The driver is OMAP4430.
This happens every 1 minute if the SGS2 is connected to the PC.
Note: i cant see any think on my SGS2 screen.!!!!
Thanks
Have you tried booting into recovery? Power + home + volume up
Also buy a jig asap. Everyone should have one!
Sent from my GT-I9100 using XDA Premium App
tjjensen23 said:
Have you tried booting into recovery? Power + home + volume up
Also buy a jig asap. Everyone should have one!
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
i have tried all what u mentioned.!!!! nothing is working.
can u check my post #11 and advice please.
From item desciption it hasnt got i9100 listed as far as i can see
Sent from my GT-I9100 using XDA Premium App
What do you mean you bought it without warranty? Where did you buy it from? Most on-line stores should accept a warranty return
Micksta said:
What do you mean you bought it without warranty? Where did you buy it from? Most on-line stores should accept a warranty return
Click to expand...
Click to collapse
Back of the truck special AKA five finger discount lol
But yes from a site such as clove you be able to return for warranty
Sent from my GT-I9100 using XDA Premium App
Micksta said:
What do you mean you bought it without warranty? Where did you buy it from? Most on-line stores should accept a warranty return
Click to expand...
Click to collapse
I bought it without warranty.!!
warranty is not really an issue, I belive under UCC and under normal statutory law in EU that the retialer is legally responsable for 2 years. If it's unfit for purpose in that time, you simply return it. If they refuse, you ask them to put their refusal on paper for the record. Often it turns out fine
Hi!
While installing the revolt rom, downloaded here from the xda, the screen suddenly went black and the phone died. I have tried everything. I can't get to download mod or recovery mode. There's any sign from it... I read somewhere that a jig can help out! What do you think?
Thanks in advance!
[EDIT] The phone is a Samsung Galaxy S2!
Cheers!!
Did your phone shut off during the install?
Phone model? When exactly did it shut off?
Sent from my GT-I9100 using Tapatalk 2
Based on what you've said, I'm afraid your phone is hard bricked. I say this because the same thing occured to me, only I knowingly pulled the USB out whilst it was flashing a pit file. You mentioned your battery died, maybe leaving it plugged in to charge for over an hour or so might revive it, does the phone become slightly (if not) warm near the camera? If it does, you then atleast know the phone isn't completely dead (from fixing, that is).
I ordered a jig and that didn't work, luckily, my carrier provided a repair service guarantee in which they repaired the phone in a couple of weeks, I just played dumb over the phone prior to sending it off.
Good luck and keep us posted.
fagundes666 said:
Hi!
While installing the revolt rom, downloaded here from the xda, the screen suddenly went black and the phone died. I have tried everything. I can't get to download mod or recovery mode. There's any sign from it... I read somewhere that a jig can help out! What do you think?
Thanks in advance!
Cheers!!
Click to expand...
Click to collapse
please provide your ROM kernel details before you attempted to flash revolt ROM.
Swyped from my Samsung Galaxy SII
jthatch12 said:
Did your phone shut off during the install?
Click to expand...
Click to collapse
Hi!
I forgot to mention...My phone is a Samsung Galaxy SII!
Like jthatch12 said, the phone just shut off during the install process.
I've already instaled a lot of roms downloaded here from xda and never got this kind of trouble! I read somewhere that a jig would take to download mode... Hope so!
Thank you all!
Cheers!
BlurrOVO said:
Based on what you've said, I'm afraid your phone is hard bricked. I say this because the same thing occured to me, only I knowingly pulled the USB out whilst it was flashing a pit file. You mentioned your battery died, maybe leaving it plugged in to charge for over an hour or so might revive it, does the phone become slightly (if not) warm near the camera? If it does, you then atleast know the phone isn't completely dead (from fixing, that is).
I ordered a jig and that didn't work, luckily, my carrier provided a repair service guarantee in which they repaired the phone in a couple of weeks, I just played dumb over the phone prior to sending it off.
Good luck and keep us posted.
Click to expand...
Click to collapse
You pulled the usb cable out, while flashing a pit file?!
Why? Pit files are extremly dangerous.
I almost flashed a SGS1 pit file once..
Have you tried to remove the battery and leave for a few mins.
Sent from my HTC Desire using xda app-developers app
s.d.oconnor said:
Have you tried to remove the battery and leave for a few mins.
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
Try that too... Several times! There's no sign of life...
fagundes666 said:
Try that too... Several times! There's no sign of life...
Click to expand...
Click to collapse
If you connect to your computer via USB are you getting any responce from your computer or phone at all. Also do you know anyone that has a galaxy s2, so you can see if it's the battery that has gone.
Sent from my HTC Desire using xda app-developers app
S II? Ok.
I9100/G/M/P/T? Your previous ROM? What are you did, more details. more.
If it doesn't go into Download Mode with a jig, then it looks like a full hard-brick.
Do you know why it shut off? Did you fully charge the phone before flashing the ROM? Did you compare the MD5 sums to check that the ROM wasn't corrupt?
I bricked my phone last year. I got Odin FAIL (corrupt ROM) and I pulled the battery. That was it - it was bricked. No download mode - nothing. I sent it off to Three and played dumb. Two weeks later, my phone was fixed.
If the jig doesn't work, your options are JTAG or service center.
epic118 said:
If it doesn't go into Download Mode with a jig, then it looks like a full hard-brick.
Do you know why it shut off? Did you fully charge the phone before flashing the ROM? Did you compare the MD5 sums to check that the ROM wasn't corrupt?
I bricked my phone last year. I got Odin FAIL (corrupt ROM) and I pulled the battery. That was it - it was bricked. No download mode - nothing. I sent it off to Three and played dumb. Two weeks later, my phone was fixed.
If the jig doesn't work, your options are JTAG or service center.
Click to expand...
Click to collapse
I didn't test any of those. The battery was ok.
I also did what s.d.oconnor said, I plug it into the computor but got no response.
The only response I got from the phone, is the warm up near the camera when I plugged it into charge for over an hour.
@bkjugg my previous rom was Wanan lite.
Thank you all.
Cheers!
I feel your pain!.. I just bricked my SGS2 yesterday. Knowing fully how I did it, but just had a brain-f*ck at the time..
I searched everywhere high and low on how to unbrick a hard brick. Already had a jig which didn't work.. tried every type of combo.. It's now going to get dropped into my local samsung repairer tomorrow to get looked at under warranty (as they can not tell how you hard brick it because they is no way of retrieving that information).
Jtag is for US customers, an I am not waiting 5 weeks for my phone.
Although until tomorrow, I am still going to look for a method to wake it up possibly..
I just took it as a known risk of flashing 100's of roms and kernels to my beloved phone..
markymark0055 said:
I feel your pain!.. I just bricked my SGS2 yesterday. Knowing fully how I did it, but just had a brain-f*ck at the time..
I searched everywhere high and low on how to unbrick a hard brick. Already had a jig which didn't work.. tried every type of combo.. It's now going to get dropped into my local samsung repairer tomorrow to get looked at under warranty (as they can not tell how you hard brick it because they is no way of retrieving that information).
Jtag is for US customers, an I am not waiting 5 weeks for my phone.
Although until tomorrow, I am still going to look for a method to wake it up possibly..
I just took it as a known risk of flashing 100's of roms and kernels to my beloved phone..
Click to expand...
Click to collapse
Hi!
I didn't try a jig because I don't have one. I've ordered one on ebay and I have to wait a few days now and see if it works. If not, I'll send the phone to samsung and try to get it repaired under warranty. If they say that it isn't covered by warranty, I'll try a guy on ebay uk. Just search for jtag s2.
Cheers!!
markymark0055 said:
I feel your pain!.. I just bricked my SGS2 yesterday. Knowing fully how I did it, but just had a brain-f*ck at the time..
I searched everywhere high and low on how to unbrick a hard brick. Already had a jig which didn't work.. tried every type of combo.. It's now going to get dropped into my local samsung repairer tomorrow to get looked at under warranty (as they can not tell how you hard brick it because they is no way of retrieving that information).
Jtag is for US customers, an I am not waiting 5 weeks for my phone.
Although until tomorrow, I am still going to look for a method to wake it up possibly..
I just took it as a known risk of flashing 100's of roms and kernels to my beloved phone..
Click to expand...
Click to collapse
Yep, same shiat. I can enter in download but can't in recovery + can't charge my phone ( has flashed 100500 ROMs, kernels, and all is ok, but not checked md5 - full wipe - bye bye until I return home. I hope I'll recover my phone.
Good luck OP.
I'm in the club for a brick SGS II, no smiles here too....
ChardC said:
I'm in the club for a brick SGS II, no smiles here too....
Click to expand...
Click to collapse
Since the jig didn't work, I sent my phone to samsung, under warranty! Now I just have to wait for better news...
my phone seems to have been bricked as well
Phone was about 80% power and plugged into the wall, all of a sudden, screen goes blank
- was browsing twitter at the time
cannot
- enter download mode
- enter recovery mode
- power on
- charge
tried
- usb jib (i have tried before while my phone actually worked and it didnt work then either)
- taking out battery, sim , microsd for 24 hours and trying to boot again
- swapped batteries with friends working i9100 , he boots up, i still dont
running
- CM9 cm-9-20120916-NIGHTLY-galaxys2.zip
- Siyah kernel SiyahKernel S2-v4.1.5
- GAPPS 20120429
- LPX modem
any ideas ?
Timstah said:
my phone seems to have been bricked as well
Phone was about 80% power and plugged into the wall, all of a sudden, screen goes blank
- was browsing twitter at the time
cannot
- enter download mode
- enter recovery mode
- power on
- charge
tried
- usb jib (i have tried before while my phone actually worked and it didnt work then either)
- taking out battery, sim , microsd for 24 hours and trying to boot again
- swapped batteries with friends working i9100 , he boots up, i still dont
running
- CM9 cm-9-20120916-NIGHTLY-galaxys2.zip
- Siyah kernel SiyahKernel S2-v4.1.5
- GAPPS 20120429
- LPX modem
any ideas ?
Click to expand...
Click to collapse
does it get hot if you plug it in the charger?
i bricked my SII last month trying to format internal sd in ext3, dont know what really happened, i rebooted and it just died, same symptoms as your phone.
i took it to a repair center under warranty and they replaced the motherboard for free.
hi i have hard bricked my sgs2, it happened while i was restoring a rom from rom manager and my battery died. what i need to know is whether its worth trying a jig because from what i have read ,if the damage is in the emmc chip its un recoverable. and yes i have tried putting recovery mode and download mode but the phone is comlpetely dead , i have two batterys and a desk charger so i know that the battery is ok.. is it worth buying a jig and waiting for it to arrive just to find it wont work or do i put it straight in the shop.. the question is will a flat battery during a restore damage the emmc chip or is it recoverable in anyones opinion. thanks in advance guys............UPDATED ON MY LAST THREAD
Well since there is no such thing as a "soft brick" there is no such thing as a "hard brick". Your device is just "bricked".
Yes its probably worth getting a jig, they cost about £1 of ebay or you could even make your own so why not?
If it is your chip or bootloader then the device is most likely screwed and you will need to send it away for a JTAG or maybe mobo replacement.
TheATHEiST said:
Well since there is no such thing as a "soft brick" there is no such thing as a "hard brick". Your device is just "bricked".
Yes its probably worth getting a jig, they cost about £1 of ebay or you could even make your own so why not?
If it is your chip or bootloader then the device is most likely screwed and you will need to send it away for a JTAG or maybe mobo replacement.
Click to expand...
Click to collapse
hi thanks for the reply , i have just ordered a jig off fleabae, ill try it but im expecting the worse . if it does not work will i need to buy a motherboard or is it cheaper to send it off to be fixed.
toppertighe said:
hi thanks for the reply , i have just ordered a jig off fleabae, ill try it but im expecting the worse . if it does not work will i need to buy a motherboard or is it cheaper to send it off to be fixed.
Click to expand...
Click to collapse
Depends. If you still have the warranty it is cheaper to send it for a fix to samsung service centre..
Sent from my GT-I9100 using Tapatalk 2
Spiralzz said:
Depends. If you still have the warranty it is cheaper to send it for a fix to samsung service centre..
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
yeah they might not fix it when they find out that it is rooted, will post results of jig . thanks guys
toppertighe said:
yeah they might not fix it when they find out that it is rooted, will post results of jig . thanks guys
Click to expand...
Click to collapse
Well, if you used triangle away to remove the yellow triangle and reset the flash counter, they wont know whether it was rooted or not. Plus, in a hardbrick, they cant access anything, so you're safe anyways.
Sent from my GT-I9100 using Tapatalk 2
It has happened the same to me,from rom manager,worst apk ever.
If your device is under warranty Samsung must fix it for free,they cannot proove that was rooted.
I was afraid for the same reason but in a hour they had fixed it with the last ics update,they dont asked me anything, the evening the device was root again..
Sent from my GT-I9100 using xda premium
toppertighe said:
hi i have hard bricked my sgs2, it happened while i was restoring a rom from rom manager and my battery died. what i need to know is whether its worth trying a jig because from what i have read ,if the damage is in the emmc chip its un recoverable. and yes i have tried putting recovery mode and download mode but the phone is comlpetely dead , i have two batterys and a desk charger so i know that the battery is ok.. is it worth buying a jig and waiting for it to arrive just to find it wont work or do i put it straight in the shop.. the question is will a flat battery during a restore damage the emmc chip or is it recoverable in anyones opinion. thanks in advance guys
Click to expand...
Click to collapse
when you revive your phone or get another please, run away from ROM MANAGER. that app maybe good for other phones but it's very deadly on our phone.
Swyped from my Samsung Galaxy SII
well i have recieved my jig and it hasnt worked . i have contacted tmob and they are fixing it under warrenty. just the waiting game now.
toppertighe said:
hi i have hard bricked my sgs2, it happened while i was restoring a rom from rom manager and my battery died. what i need to know is whether its worth trying a jig because from what i have read ,if the damage is in the emmc chip its un recoverable. and yes i have tried putting recovery mode and download mode but the phone is comlpetely dead , i have two batterys and a desk charger so i know that the battery is ok.. is it worth buying a jig and waiting for it to arrive just to find it wont work or do i put it straight in the shop.. the question is will a flat battery during a restore damage the emmc chip or is it recoverable in anyones opinion. thanks in advance guys
Click to expand...
Click to collapse
UPDATE .........i have recieved my phone back from tmob service centre and it is all fixed for free under warranty. they replaced the main board and did not pick up on any rooting/flashing. total time from posting to recieveing back was 13 days inc weekends. makes me think twice about messing on with it cos when i didnt have it i really missed it. think ill leave well alone looking at the amount of ppl in the last couple of months who have bricked there sgs2 .
toppertighe said:
UPDATE .........i have recieved my phone back from tmob service centre and it is all fixed for free under warranty. they replaced the main board and did not pick up on any rooting/flashing. total time from posting to recieveing back was 13 days inc weekends. makes me think twice about messing on with it cos when i didnt have it i really missed it. think ill leave well alone looking at the amount of ppl in the last couple of months who have bricked there sgs2 .
Click to expand...
Click to collapse
Congratulations
Swyped from my Samsung Galaxy SII
Supercharged ParanoidAndroid 2.12
Dorimanx kernel 5.78
GT I9100
Next phone: Galaxy NOTE II
Hi,
I think I may have bricked my phone somehow.
I have an international Samsung galaxy S3 I9300.
I'm using SiyahKernel S3 v1.7rc1 for dual-boot.
ParanoidAndroid 2.51 as primary ROM and Stock Samsung JB as secondary.
I have used the battery mod that comes with the kernel to speed up charging.
Here's what happened:
I have been using this setup for quite some time without any problems, but I have noticed lately that the phone have been rebooting automatically a few times. I didn't think too much about it. Annoying, but didn't happen often. Yesterday I put my phone on charging before I went to bed, and the phone was on. When I woke up the phone had turned off (alarm didn't go off either, so I missed work..) and the green charging notification light was stuck on permanently. I couldn't turn on the phone, it didn't react at all. I took out the battery to reset it, put it back in and tried again. The charging light was gone, but still couldn't turn it on. No sign of life.
I tried my battery in a friends phone and it worked fine. Also tried his battery in my phone, but no change. So seems the battery is not the problem. I have tried to keep the battery out for some time, holding buttons to drain all power, but no change.
It doesn't respond to any cable being plugged in either (USB or charging), so can't flash anything.
I'm lost here really. The phone doesn't respond to anything any more so I have no idea what to do to fix it. And I'm guessing if I send it back for repair they're not going to accept it as it's not stock. Would really appreciate any help.
Hi,
Are you able to put your phone in download mode at least? It happened with my old Galaxy S and the only thing worked was download mode.
If download mode is possible, try to flash a new rom via odin and than install siyah kernel to remove the 2nd rom partition.
Good luck.
Cheers
ramsorriso said:
Hi,
Are you able to put your phone in download mode at least? It happened with my old Galaxy S and the only thing worked was download mode.
If download mode is possible, try to flash a new rom via odin and than install siyah kernel to remove the 2nd rom partition.
Good luck.
Cheers
Click to expand...
Click to collapse
No, can't enter download mode either
You're boned....
Unless you can enter download mode or CWM theres nothing to be done....
Send it to a Samsung Service center.
Overdriving the battery charging circuit comes with a cost. That is it and now your phone is FUBAR.
Have you tried shouting at it loudly and calling it a few names? You're out of luck, it seems (needs returning to Samsung) but at least it'll make you feel better!
Simonetti2011 said:
Send it to a Samsung Service center.
Overdriving the battery charging circuit comes with a cost. That is it and now your phone is FUBAR.
Click to expand...
Click to collapse
Hmm that sucks. Back to my iPhone 1 then
But will they not be able to see that It's not stock firmware on it?
Kryten2k35 said:
Have you tried shouting at it loudly and calling it a few names? You're out of luck, it seems (needs returning to Samsung) but at least it'll make you feel better!
Click to expand...
Click to collapse
I'm usually a calm person, but I'll try that shouting and see if it makes me feel better. Don't have the money for a new S3 so shouting will have to do.
star85 said:
Hmm that sucks. Back to my iPhone 1 then
But will they not be able to see that It's not stock firmware on it?
Click to expand...
Click to collapse
If they can't boot the phone, they'll simply replace the defective board, restore your original IMEI, wipe your phone and send it back to you.
At least that is what has happened to other users whose phones had the same fault as yours, and for the same reasons.
I guess your phone is still under warranty, isn`t it? If so, just get it repaired under warranty and let this be a lesson that nothing comes free, including fast-charging the battery.
Simonetti2011 said:
If they can't boot the phone, they'll simply replace the defective board, restore your original IMEI, wipe your phone and send it back to you.
At least that is what has happened to other users whose phones had the same fault as yours, and for the same reasons.
I guess your phone is still under warranty, isn`t it? If so, just get it repaired under warranty and let this be a lesson that nothing comes free, including fast-charging the battery.
Click to expand...
Click to collapse
This ^
Plus, the phone is knackered, so you don't have anything to lose by trying, really!
Man: had this happen to me today as well, and now that I notice, I see LOTS of similar reports.
FWIW: Most people weren't "fast charging" their phones; there's clearly just a hardware fault somewhere.
What was your official stock firmware you were running?
Sent from my GT-I9300 using xda app-developers app
Simonetti2011 said:
If they can't boot the phone, they'll simply replace the defective board, restore your original IMEI, wipe your phone and send it back to you.
At least that is what has happened to other users whose phones had the same fault as yours, and for the same reasons.
I guess your phone is still under warranty, isn`t it? If so, just get it repaired under warranty and let this be a lesson that nothing comes free, including fast-charging the battery.
Click to expand...
Click to collapse
Thanks for your help. Yes it's still under warranty.
Hi, my Galaxy's counter - even if rooted - is set back to zero and the triangle did not show anymore.
Now the actual issue: Yesterday I tried to take a screenshot which miserably failed while the device froze and I had to force reboot it. This proved to be in vain as well, though, as it always stopped with the first graphic (samsung galaxy s2 logo). After two forced shutdowns, unfortunately, it did not bestir itself at all no more.
A change of the battery did not turn out successful either. Not surprisingly, the download mode is not accessible and, similarly, putting it on the charger it does not show any response as well.
What can I do? Would the repair center be able to find that it was rooted?
Best regards,
didb
Can you get into recovery? More info. What Rom? What recovery? Is it rooted?
andrewwright said:
Can you get into recovery? More info. What Rom? What recovery? Is it rooted?
Click to expand...
Click to collapse
Can't get into recovery mode. Rom was the official jelly bean one which was "unofficially" transferred to the Galaxy S2 by developers but not released by Samsung officially. Hope that makes sense. And yup - as I mentioned - it is rooted.
Yes it makes sence. Jig to force it to download mode and flash with Odin. Have you pulled the battery out for 5 mins then try? Sometimes work.
andrewwright said:
Yes it makes sence. Jig to force it to download mode and flash with Odin. Have you pulled the battery out for 5 mins then try? Sometimes work.
Click to expand...
Click to collapse
I tried taking it out for the whole night twice now. No success.
Jig doesn't help either.
Jtag may work.if service Center brings it to life and sees the custom Rom then yes they will be able to tell you rooted it.
andrewwright said:
Jtag may work.if service Center brings it to life and sees the custom Rom then yes they will be able to tell you rooted it.
Click to expand...
Click to collapse
That's what they call riff box, mh? Or "Android Debug Bridge"? The weird thing is it didn't even happen while flashing. It worked for almost a year without hesitation and then I took a screenshot and it just dies? -.-
Does seem funny to happen like that. No one messed with it? Screen shot and after that dead? If jig isn't getting it to download mode then there is something bad that has happened
andrewwright said:
Does seem funny to happen like that. No one messed with it? Screen shot and after that dead? If jig isn't getting it to download mode then there is something bad that has happened
Click to expand...
Click to collapse
I know it's crazy. After the screenshot it would only load until the Samsung logo and right after that it was fully dead. Would you try your luck with the service partner ?
Tbh you don't have a choice. Or take it to local shop for Mb repair. :thumbup: either way Mb needs to be replaced now so go with service Center if they find its your fault and cost to much get it sent Bk to you and take to local shop for repair.
andrewwright said:
Tbh you don't have a choice. Or take it to local shop for Mb repair. :thumbup: either way Mb needs to be replaced now so go with service Center if they find its your fault and cost to much get it sent Bk to you and take to local shop for repair.
Click to expand...
Click to collapse
thanks for your help. ill try my luck.