I've searched high and low for this, but I can't find an answer.
I am using the SSH Tunnel app on a rooted HTC One S which is otherwise stock. It works perfectly on my home wifi network (if I access an ip web page it shows my SSH server's ip).
If I then turn off the tunnel, disconnect from wifi, reconnect over 3g it connects fine, but when I access the same site it shows my phone's IP, not my servers.
Are there any known issues that prevent SSH Tunnel from working on 3G?
Any suggestions?
rsdza said:
I've searched high and low for this, but I can't find an answer.
I am using the SSH Tunnel app on a rooted HTC One S which is otherwise stock. It works perfectly on my home wifi network (if I access an ip web page it shows my SSH server's ip).
If I then turn off the tunnel, disconnect from wifi, reconnect over 3g it connects fine, but when I access the same site it shows my phone's IP, not my servers.
Are there any known issues that prevent SSH Tunnel from working on 3G?
Any suggestions?
Click to expand...
Click to collapse
i have the same problem
any fix?
Related
In the Wireless Networks it says "Connected" next to my "SSID" i have the correct key and dns/static ip setup. I go on Marketplace, internet browser (Opera), and another internet browser (Skyfire) and none of them work, so basically I'm connected to my router but I have no Internet.
I have HSPL3, ChuckyROM, and Radio Radio_2_11_50_26, I used to have Radio 2_12_50_02_2 but the internet didn't work with that one either.
What could be wrong??
Sekito said:
In the Wireless Networks it says "Connected" next to my "SSID" i have the correct key and dns/static ip setup. I go on Marketplace, internet browser (Opera), and another internet browser (Skyfire) and none of them work, so basically I'm connected to my router but I have no Internet.
I have HSPL3, ChuckyROM, and Radio Radio_2_11_50_26, I used to have Radio 2_12_50_02_2 but the internet didn't work with that one either.
What could be wrong??
Click to expand...
Click to collapse
First off why are you using static?
Second have seen these types of issues before with static , try dynamic(DHCP).
well i have to use the dns, i don't need the static ip, i switched to dhcp and only input the dns but it is still not working.
Sekito said:
well i have to use the dns, i don't need the static ip, i switched to dhcp and only input the dns but it is still not working.
Click to expand...
Click to collapse
In your settings, when you configured your wifi , in the box that says "connects to:" did you select "The Internet" or "My Work", this should be Internet ...
yea its says "The Internet" and by the way, after i removed the static IP my connection just says Unavailable when i try to connect (I hide my router's SSID so i input the stuff manually)
Oh and i had a motorola cliq before and it connected just fine
ok so for some reason i retried it just now and the internet works...so i guess problem is solved
Hi, I searched the forums and found this thread regarding wifi Internet problem so I'm posting my problems here.
I'm having similar wifi issue. I can connect to home router just fine but when I'm out using either free wifi from some stores (like panera or starbucks) or School wifi, it shows up as "Connected" but when I try browser it won't even show the home page or log in page. I switched from "Work" to "Internet" but it still won't work...
I don't think it's hardware problem but more so OS problem or something i'm missing. This problem only occurs with WinMo 6.5(I use stock rom), and when I boot Dan Android, wifi works fine. I'm not sure if Android's usage of wifi is somehow affecting my WinMo's ability to log into wifi but this is my wild guess.
If someone knows what my problem is could you please help me?
thanks
i think my problem was that when i tried to connect to my wifi, my hd2 was connected to my pc via usb. when i tried to connect when i'm not connected to my pc it worked
that's about all i know, hope it helps
did recognize this too...i think w-lan is disabled when active sync is activated...because the phone can use the internet connection of the pc.
back to topic: do you use static ip's in your home network or does the other networks (school) require a static but you're on dynamic ip?
DN41
hm, I have no idea which ip I use when I'm connected to home or public. How do I check?
Ok, so, I have a VPN setup at home, and I'm connected to it with my phone (AT&T Infuse 4G). Does every single packet go out through the VPN or only the ones destined for an IP on the private subnet? If it indeed passes every packet over the VPN (as with others I've used), why couldn't one just tether it after that? Would all data not then go over AT&Ts network and out to the internet via my home connection?
I've actually been musing about this for a while, but never bothered to actually connect my phone to my home VPN until now to even think about trying it.
Anybody have any unique insight on this?
I am having problem connecting VPN over AT&T's 3G network. It will log-in and get IP address from VPN server. VPN server shows it is logged in. Connection stays connected.
However, I cannot access any resources over VPN connection. Cannot even get into router. (I'm running VPN server in my router running DD-WRT).
Tried pinging router from terminal, no response.
It works perfectly when I'm connected using Wi-Fi.
Any idea what is the problem and how to fix?
No one using VPN??
Hi all,
Does FoxFi work for WiFi tethering when NOT yet rooted, on Dinc 4? Anyone actually tested it? I'm between this and the S III, and tethering will be one of my uses. Since VZ locked S III I think I may get a Dinc 4.
Thanks for any inputs!
I have the Dinc4g, and have not rooted it just yet.
I have been trying to get FoxFi to work. My laptop will connect to FoxFi and receive an IP address via DHCP with no problem (using WPA password). I can successfully ping the phone while connected, but can *not* get out to the internet. I may be rooting sooner than later, as I too need to tether on occasion. In the mean time, I will be settling for a USB tether..
Edit: FoxFi does appear to work if you use the Proxy option (requires the FoxFi add-on). I was able to browse using FireFox after setting up the FireFox network settings to use the Proxy.
junkmail9 said:
I have the Dinc4g, and have not rooted it just yet.
I have been trying to get FoxFi to work. My laptop will connect to FoxFi and receive an IP address via DHCP with no problem (using WPA password). I can successfully ping the phone while connected, but can *not* get out to the internet. I may be rooting sooner than later, as I too need to tether on occasion. In the mean time, I will be settling for a USB tether..
Edit: FoxFi does appear to work if you use the Proxy option (requires the FoxFi add-on). I was able to browse using FireFox after setting up the FireFox network settings to use the Proxy.
Click to expand...
Click to collapse
Absolutely 100% same issue here, connects, grabs an IP instantly, but it cannot browse out. The proxy-add on gives me instant web access when configured, but obviously I cannot use any other services over the proxy (like RDP, Ping, VPN, etc.) It seems almost like there's a firewall or routing issue on the phone on the NAT side of things. I can ping the gateway (192.168.43.1) but cannot route beyond it.
Can't grab IP
I'm using a Motorola Atrix HD and I can't seem to get my Nexus to grab an IP from FoxFi, even with the app.
working for me right now: FoxFi Addon, Firefox set on 'no proxy'
Hello everybody.
Since last saturday i'm testing a Galaxy S3.
I want to test if everything works properly before buying it.
I have some problems deling with the WIFI stuff.
I gave him a static IP (192.168.1.15), configured the gateway as the ip of my router (192.168.1.1),
the network class is 255.255.255.0 (network prefix = 24), the DNS points to the IP of the Router (192.168.1.1)
It connects without problems. form the S3 i can ping any device in my network and from other devices i can ping the S3.
I can connect to the configuration site of the router and from the page of connected devices i can see that the S3 is connected
with the correct ip and also the MAC adress is correct.
And for now everything is fine.
Problems raise up when i try to surf internet. The answer is always "Page not found"
If i open the browser and try to navigate to google] the answer is "Page not found". Same for any other site i try to connect with.
I cannot ping external adresses from the S3. Only the ones inside my LAN.
On the same LAN there are 3 laptops, 1 IPhone, 1 TV, NAS NETGEAR , home automation screen, all connected in WIFI.
All of them configured in the same way. (static ip, gateway=ip router, dns = ip router, network class 255.255.255.0),
And they all access internet without any problem.
The network is protected with WPA2/PSKey, encryption AES.
I tried to configure channel with WPA, WEP, without protection, but no changes.
The S3 connects to router but does not connect to internet,
I also tried to make it point to a public DNS 8.8.8.8. No WAY!
Works for other devices.
I tried to reset S3 to factory parameters, same thing i did for the router.
I reconfigured everything from scratch but no result.
I do not have any filtering based on IP or MAC adress on my Router.
I tried with DHCP, with reservation of IP adresses or without reservation. No change.
Other devices can access internet. S3 does not.
I have to say i'm quite desperate.
If you guys have some good ideas to solve or diagnostic the problem i would be grateful.
Cheers,
Fabio
I get that around my office as I walk around, I find that when I change AP in range my internet connection drops. I have to constantly disable/re-enable WiFi.
Even around my house, I have the handset to WiFi always on, yet when I wake up in the morning the internet connection is not working yet there is an IP. I couldn't be bothered to telnet to port 80 etc., but I hear that the Jellybean update will resolve this issue.
Same problem
nickzap said:
Hello everybody.
Since last saturday i'm testing a Galaxy S3.
I want to test if everything works properly before buying it.
I have some problems deling with the WIFI stuff.
I gave him a static IP (192.168.1.15), configured the gateway as the ip of my router (192.168.1.1),
the network class is 255.255.255.0 (network prefix = 24), the DNS points to the IP of the Router (192.168.1.1)
It connects without problems. form the S3 i can ping any device in my network and from other devices i can ping the S3.
I can connect to the configuration site of the router and from the page of connected devices i can see that the S3 is connected
with the correct ip and also the MAC adress is correct.
And for now everything is fine.
Problems raise up when i try to surf internet. The answer is always "Page not found"
If i open the browser and try to navigate to google] the answer is "Page not found". Same for any other site i try to connect with.
I cannot ping external adresses from the S3. Only the ones inside my LAN.
On the same LAN there are 3 laptops, 1 IPhone, 1 TV, NAS NETGEAR , home automation screen, all connected in WIFI.
All of them configured in the same way. (static ip, gateway=ip router, dns = ip router, network class 255.255.255.0),
And they all access internet without any problem.
The network is protected with WPA2/PSKey, encryption AES.
I tried to configure channel with WPA, WEP, without protection, but no changes.
The S3 connects to router but does not connect to internet,
I also tried to make it point to a public DNS 8.8.8.8. No WAY!
Works for other devices.
I tried to reset S3 to factory parameters, same thing i did for the router.
I reconfigured everything from scratch but no result.
I do not have any filtering based on IP or MAC adress on my Router.
I tried with DHCP, with reservation of IP adresses or without reservation. No change.
Other devices can access internet. S3 does not.
I have to say i'm quite desperate.
If you guys have some good ideas to solve or diagnostic the problem i would be grateful.
Cheers,
Fabio
Click to expand...
Click to collapse
I'm having the exact same problem, I'd really like to know if you were able to solve the problem.
Phoenix_Dean said:
I'm having the exact same problem, I'd really like to know if you were able to solve the problem.
Click to expand...
Click to collapse
Me too... Is anybody has solution for this issue?
Oh poor fellows ....try to add DNS manually according to your ISP...not add public DNS
Try forgetting the network and connecting again and make sure all the other devices are using different ip address
Sent from my GT-I9300 using xda app-developers app