Related
i have been searching these forums for the past few days and have come up dry.. i have an htc rezound and I want the OTA BUT i have perm rooted it and removed most (if not all) the bloat... how do i go about rebloat and relocking my phone? i have tried using cleantool and it keeps waiting for the phone or it just fails all over itself repeatedly
edit: i have it set to charge only, sync is off and closed, and it is in fastboot mode. I have also tried something I found on here which seems like it is very similar to cleantools with less functionality and it just says <waiting for device> indefinitely
twich12 said:
i have been searching these forums for the past few days and have come up dry.. i have an htc rezound and I want the OTA BUT i have perm rooted it and removed most (if not all) the bloat... how do i go about rebloat and relocking my phone? i have tried using cleantool and it keeps waiting for the phone or it just fails all over itself repeatedly
edit: i have it set to charge only, sync is off and closed, and it is in fastboot mode. I have also tried something I found on here which seems like it is very similar to cleantools with less functionality and it just says <waiting for device> indefinitely
Click to expand...
Click to collapse
There are a few different ways to do it. Easiest way I did it to make it foolproof, is flash stock recovery if your on a custom recovery and relock phone and run the RUU. It will put you back to stock and you can just download the OTA and update it, then Unlock and flash Amon Ra recovery and from the developer menu install SU and superuser to reroot.
If you need more instructions , just ask otherwise to me that was the easiest way.
P.S. Just be aware the internal SD card gets wiped after you unlock again so move anything off the internal SD to the external SD that you want to save prior to unlocking again.
I didnt take the ota, I used cons ota rom.. this was my steps for that
1) download rom from here http://forum.xda-developers.com/showthread.php?t=1467329
2) boot into recovery, flash rom....
here you can go two ways, if you dont want the new baseband, it will flash the ph98img and not do anything, if you want the new radios I will tell you how I did it, then tell you where you need to start if you wont want them.
3)perform nandroid
4)via adb (thing you used to unlock originally) fastboot oem lock YOU ARE NOW LOCKED.
5)boot into hboot it will flash the ph98img
6) Unlock bootloader (find the email with the unlock.bin code and follow those instructions)
7)Reboot phone
8)connect to pc, charge only usb debugging enabled
9)run one click root
Proceed with this if you get the mainver error ONLY otherwise if having wifi issues, proceed to step 13
10) after rooted follow this post http://forum.xda-developers.com/showthread.php?t=1467099 NOTE, op in the thread supplied his miscnew.img USE IT!
11)Read this thread http://forum.xda-developers.com/showthread.php?t=1459347&highlight=mainver it will explain how to get the ph98s to work.
11a) do the ph98 file thing to the ph98 img in amon ra to get it to flash in bootloader
12) after amon ra is restored, perform restore nandroid.
If wifi is not working, even if you dont have mainver issues do step 13
13) If having wifi issues as in not working go to this thread http://forum.xda-developers.com/showthread.php?t=1467793 and follow instructions EXACTLY!!!
Now you should be running new radios, hb2.11, the 2.6 kernel etc.
You will have to follow the post in step 11 to get any ph to work from now on.
I AM NOT RESPONSIBLE IF YOU BRICK YOUR PHONE, BURN YOUR HOUSE DOWN OR ABDUCTED BY ALIENS BY FOLLOWING THE ABOVE INSTRUCTIONS.
im having some trouble getting into recovery because clockworkmod says it does not have an officially supported recovery... how do i manually install one?
Assuming you installed a recovery, just boot to Hboot. Pull the battery, then hold the power button and volume down button. Once in Hboot you can choose Recovery.
twich12 said:
im having some trouble getting into recovery because clockworkmod says it does not have an officially supported recovery... how do i manually install one?
Click to expand...
Click to collapse
To flash a recovery do the above steps to get into hboot (power down, pull battery, hold volume down and power buttons) and once you are in hboot, choose fastboot. Then connect to your pc and in the pc cmd prompt type:
fastboot flash recovery nameofrecovery.img (name of stock recovery you need to download, trying to find a link for you...)
That will put the stock recovery on the phone, then you can run RUU to get the rest back to stock and you can then accept the OTA.
feralicious said:
To flash a recovery do the above steps to get into hboot (power down, pull battery, hold volume down and power buttons) and once you are in hboot, choose fastboot. Then connect to your pc and in the pc cmd prompt type:
fastboot flash recovery nameofrecovery.img (name of stock recovery you need to download, trying to find a link for you...)
That will put the stock recovery on the phone, then you can run RUU to get the rest back to stock and you can then accept the OTA.
Click to expand...
Click to collapse
got it! OTA and everything.. debating on rerooting for a bit thanks a lot everyone! +rep
All you have to do to reroot now is flash Amon Ra and then install su from within that. So it's super easy at this point.
su seems to have remained installed.... no root but su is definitely still installed! the only reason i am going to wait on rerooting is so i can learn more about it before i flash or anything
Yeah, it will show up in your apps but it doesn't work properly until you reinstall. I thought I had remained rooted but when I went to use Titanium Backup it couldn't get root access, then after I reinstalled su it worked fine.
But yeah, if you don't need it yet don't worry about it. The only good reason to do it is to use TiBU to save all your settings and if you have Amon Ra you can make a nandroid of your phone so that if something happens you have a backup image of everything and can restore it very easily via Amon Ra. You can still stay on stock ROM etc... the only thing you would need to flash is the Amon Ra recovery.
ya i see what you mean... I also want to get rid of this unbelievable amount of bloat... geez their are a ton of useless verizon apps never mind the stupid games
Ok, I was trying to flash the newest ICS leak and being the newb I am, its borked.
Right now I have an unlocked bootloader with H-Boot 2.11.0000
I have a blank SD card and I just need to know what files to copy to it and what steps to get back to stock or possibly getting the 5/8 ROM leak installed
I'm assuming your s-on still, follow the directions in the OP to install.
Installation for S-ON Devices on Gingerbread firmware
* Copy ROM to SD Card AND PH98IMG.zip AND GB Firmware Patch to ROOT of SD Card
* Reboot to recovery
* wipe data / Factory Reset
* Flash ROM
* Flash GB Fimrware Patch
* Use Developer Menu to reboot to bootloader and flash the boot.img file in the PH98IMG.zip
* Reboot
* Profit!
How exactly do you FLASH the rom without renaming it?
mjones73 said:
I'm assuming your s-on still, follow the directions in the OP to install.
Installation for S-ON Devices on Gingerbread firmware
* Copy ROM to SD Card AND PH98IMG.zip AND GB Firmware Patch to ROOT of SD Card
* Reboot to recovery
* wipe data / Factory Reset
* Flash ROM
* Flash GB Fimrware Patch
* Use Developer Menu to reboot to bootloader and flash the boot.img file in the PH98IMG.zip
* Reboot
* Profit!
Click to expand...
Click to collapse
I can't get past the bolded parts... How do you flash with those files on the SD card, everytime I return to the bootloaded it just runs the PH98IMG file and updates.... from there I'm stumped.
Jonger1150 said:
I can't get past the bolded parts... How do you flash with those files on the SD card, everytime I return to the bootloaded it just runs the PH98IMG file and updates.... from there I'm stumped.
Click to expand...
Click to collapse
Take out your sd card, then go to recovery, wipe. Pop your battery out put your sd card back in, then continue.
Jonger1150 said:
I can't get past the bolded parts... How do you flash with those files on the SD card, everytime I return to the bootloaded it just runs the PH98IMG file and updates.... from there I'm stumped.
Click to expand...
Click to collapse
1) Easiest thing for you is to turn USB Debugging on in Settings (Apps > Development), hook up to PC, and use the Hasoon2000 Noob-proof toolkit to reboot directly to recovery: http://forum.xda-developers.com/showthread.php?p=22696442
2)Many Custom ROMs have Reboot to Recovery in the power button menu
3)Ninja grab the battery at an angle and slide SD Card out, go to recovery, and slide in while mainitaining power connection. (Not ah, recommended but good in a bind)
skater95 said:
Take out your sd card, then go to recovery, wipe. Pop your battery out put your sd card back in, then continue.
Click to expand...
Click to collapse
When my options are
FASTBOOT
RECOVERY
FACT Reset
Clear Storage
SIMLOCK
IMAGE CRC
Which one flashes the rom?
Jonger1150 said:
When my options are
FASTBOOT
RECOVERY
FACT Reset
Clear Storage
SIMLOCK
IMAGE CRC
Which one flashes the rom?
Click to expand...
Click to collapse
You need to first flash a custom recovery and then select that option (AmonRa 3.15 recommended, CWM is buggy on charging battery). That Hasoon2000 kit in last post can do that for you too if you don't have AmonRa installed.
PhantasmRezound said:
You need to first flash a custom recovery and then select that option (AmonRa 3.15 recommended, CWM is buggy on charging battery). That Hasoon2000 kit in last post can do that for you too if you don't have AmonRa installed.
Click to expand...
Click to collapse
That seems to be the biggest issue, can I flash a recovery without being able to boot my phone up... I only have access to the bootloader.
All the instructions fail to mention the requirement for the recovery app... That was the newb boo-boo.
I think there is a zip somewhere, but it's easier with adb.
fastboot flash recovery (name of recovery).img
I recommend S-Off. It makes all of this super easy. I promise its really not that hard. The wire trick looks worse than it is.
Edit: fixed. I'm retarded in the morning.
Sent from my ADR6425LVW using Tapatalk 2
Jonger1150 said:
That seems to be the biggest issue, can I flash a recovery without being able to boot my phone up... I only have access to the bootloader.
All the instructions fail to mention the requirement for the recovery app... That was the newb boo-boo.
Click to expand...
Click to collapse
Yeah, manually you can flash a custom recovery via the same method, a PH98IMG.zip from bootloader. You delete the existing PH98IMG file and replace with one containing AmonRa (what exactly is that zip, do you need it still?)
But, adb fastboot commands when hooked up to PC can flash the recovery directly to memory from an img file. Just need USB Debugging turned on in the Settings on a regular boot to the ROM.
Sooo just use the toolkit on a PC to eliminate hassle if ya can lol. It uses that second paragraph's method. Just need to click an option and it runs the script. Now ya know both ways.
Oh, link in earlier post from my XDA app is not working :/ here is the thread http://forum.xda-developers.com/showthread.php?p=22696442
I guess until I find the zip and instructions I have a brick.
PhantasmRezound said:
Yeah, manually you can flash a custom recovery via the same method, a PH98IMG.zip from bootloader. You delete the existing PH98IMG file and replace with one containing AmonRa (what exactly is that zip, do you need it still?)
But, adb fastboot commands when hooked up to PC can flash the recovery directly to memory from an img file. Just need USB Debugging turned on in the Settings on a regular boot to the ROM.
Sooo just use the toolkit on a PC to eliminate hassle if ya can lol. It uses that second paragraph's method. Just need to click an option and it runs the script. Now ya know both ways.
Oh, link in earlier post from my XDA app is not working :/ here is the thread http://forum.xda-developers.com/showthread.php?p=22696442
Click to expand...
Click to collapse
USB debugging in my PC? I can't access Android OS. I'm 100% limited to the bootloader with NO recovery tool.
OK!!
Got Clockwork installed!
Jonger1150 said:
USB debugging in my PC? I can't access Android OS. I'm 100% limited to the bootloader with NO recovery tool.
Click to expand...
Click to collapse
Ah, I meant the ROM, but not even the ROM boots because of bad flash. No worries. Don't need to be in the ROM anyway, toolkit works in the bootloader.
1) Ensure drivers for phone are properly installed on PC. (Google and download HTC Sync if unsure.)
2) Download and extract toolkit. Run the All In One exe file. The GUI comes up with your options.
3) With phone off, remove SD Card.
4) Boot into bootloader. Select Fastboot option.
5) Connect to PC via USB.
6) Select AmonRa from toolkit options and install.
7) Power down phone, disconnect and insert SD Card.
8) Connect phone, power it up and select Reboot to Recovery on the toolkit.
From recovery, you can enable USB mass storage option for memory and download/transfer files you need from your PC, delete the PH98IMG.zip, etc.
Jonger1150 said:
OK!!
Got Clockwork installed!
Click to expand...
Click to collapse
Ah good Still please be careful though:
PhantasmRezound said:
You need to first flash a custom recovery and then select that option (AmonRa 3.15 recommended, CWM is buggy on charging battery). That Hasoon2000 kit in last post can do that for you too if you don't have AmonRa installed.
Click to expand...
Click to collapse
Several user reports in the forum say ClockworkMod (CWM) has an issue with charging our batteries when the drain gets low. Risk not being able to charge phone at all and brick that way. AmonRa or TWRP from the Development section are still recommended for this particular phone for now.
Hope you get sorted out on the ROM
Sounds like you're getting instructions to do more than you asked.
Go to post three on the following page and scroll down to "Latest leak and installation instructions".
Make sure it flashes twice. I just did this procedure this afternoon without any trouble.
http://forum.xda-developers.com/showthread.php?t=1508118
I got the ROM up and running.... Updating my backup settings... Next step will be to replace clockwork and flash a recovery image... Gotta figure that all out now.
Is it possible to flash AMON recovery over CWM?
Jonger1150 said:
I got the ROM up and running.... Updating my backup settings... Next step will be to replace clockwork and flash a recovery image... Gotta figure that all out now.
Is it possible to flash AMON recovery over CWM?
Click to expand...
Click to collapse
Yes, just install the new recovery normally, will be okay.
I guess I did end up installing AMON recovery, I just checked. Creating Nandroid right now....
Does a Nandroid basically recover EVERYTHING?
I have a phone to return and would like to know how to remove Amon Ra Recovery I used the All-In-One Kit to install the recovery but i want to go back to stock and re-lock the bootloader ASAP can someone please help me I need to send this phone back. BTW what does the Stock option under kernel do would it return it back to stock recovery thanks.
flash the GB ruu and your phone will be stock but you will still have to relock the bootloader
Noob at Flashing RUU
Sorry for asking but I'm a noob at flashing but where do i get the stock RUU and how and where do i get it and flash it. Is there any links on how to do this. Would going to recovery and unzipping a file do the trick in my SD card. Not sure if i hit the spot on this but thanks for the help.
Got It
I figured it out thank you
JD164 said:
I figured it out thank you
Click to expand...
Click to collapse
If you could help me. What did you figure out and how did you do it?
Stock Recovery
I don't think you need to run an ruu to get the stock recovery back. search and you should be able to find a download link to get the stock recovery and you can just flash that with adb/fastboot.
the1Doctor said:
If you could help me. What did you figure out and how did you do it?
Click to expand...
Click to collapse
For stock recovery and latest ruu firmware: http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
Once you download, copy to root of micro sdcard, and rename to PH98IMG.zip
Then boot into bootloader, and it should detect it and flash automatically. note it has to flash twice. You must say yes, It will look like it rest and restarted, but it's normal.
Don't forget to delete or rename it after your done or
Sent from my Rezound using xda app-developers app
mvmacd said:
For stock recovery and latest ruu firmware: http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
Once you download, copy to root of micro sdcard, and rename to PH98IMG.zip
Then boot into bootloader, and it should detect it and flash automatically. note it has to flash twice. You must say yes, It will look like it rest and restarted, but it's normal.
Don't forget to delete or rename it after your done or
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
If you are on a stock ROM, all you have to do to replace amon ra is to do "fastboot flash recovery [stock recovery filename].img "
Then if you want to run amon ra again, just do "fastboot boot recovery [amon ra recovery].img"
I am running a rooted Rez with Amon Ra Recovery which is otherwise stock ICS. I have tried three times to install the latest Global OTA. Each time the install fails after an attempt is made to install the downloaded package. The phone reboots into Amon Ra and I see the following messages.
Installing Update
Wrong Task ID 221384E: Error in /cache/fumo/OTAPkg.zip
Status 1
Installation Aborted
Anyone know what is happening? Thanks in advance for the help.
You need the stock recovery to do update....
Sent from my SCH-1605 / Galaxy Note 2 using Tapatalk v 2.4.13
more
Found out hard way: you can't just be on the last official RUU (3.14.605.12) to get the new update from Verizon.
ALSO dammit you have to have previously taken the small February update to 3.14.605.13. The update's name mentions
605.13 in its title. The problem is that you can't get that little update anymore!!!!
Those of us with only 605.12 may have to wait until the next RUU is issued. Gripes me.
You realise someone posted the full ruu zip in this thread. You don't have to get it from software update thing
Sent from my ADR6425LVW using xda app-developers app
tried that
still looks for 605.13 and craps out with an error message!
how to solve that
In February, Flyhalf205 uploaded the 605.13 OTA.zip in another thread.
The one I could not find anywhere.
You take that little one, rename it update.zip, and flash in hboot.
Do a factory reset and it'll boot up.
Then you can get the current OTA from Verizon.
13 zip is here
13 zip
http://forum.xda-developers.com/showthread.php?p=40819479
Sent from my SCH-1605 / Galaxy Note 2 using Tapatalk v 2.4.13
Here is the FIX
michaelbsheldon said:
still looks for 605.13 and craps out with an error message!
Click to expand...
Click to collapse
Download the PH98IMG.zip in the Attachment and put it on your SD Card
1. Flash the above file in Hboot and delete it after done flashing
2. Put the new update.zip on to your SD card.
3. Reboot into Bootloader and choose Recovery
4. It will flash the new update.
5. Download the new.global.firm.PH98IMG.zip from HERE ,rename it to PH98IMG.zip and flash it in Hboot to get the latest Hboot, Radio, ......
6. Done
Just to Be Sure
I managed to get the OTA getting me to 605.13. So if I want to get to 605.14, do I just get the new firmware zip file, rename it, place it onto the sd card, and install it in HBoot and I am good to go? Just checking to be sure. Thanks.
rjr1049 said:
I managed to get the OTA getting me to 605.13. So if I want to get to 605.14, do I just get the new firmware zip file, rename it, place it onto the sd card, and install it in HBoot and I am good to go? Just checking to be sure. Thanks.
Click to expand...
Click to collapse
I just tried but no go. It said there is no update script or something. Any solution?
nbhnohome said:
Download the PH98IMG.zip in the Attachment and put it on your SD Card
1. Flash the above file in Hboot and delete it after done flashing
2. Put the new update.zip on to your SD card.
3. Reboot into Bootloader and choose Recovery
4. It will flash the new update.
5. Download the new.global.firm.PH98IMG.zip from HERE ,rename it to PH98IMG.zip and flash it in Hboot to get the latest Hboot, Radio, ......
6. Done
Click to expand...
Click to collapse
Is this the same process if the device is s-on?
nissmo66 said:
Is this the same process if the device is s-on?
Click to expand...
Click to collapse
You can only use the official update with your bootloader locked and a non modified stock rom or you need to wait for a new RUU to come out.
mjones73 said:
You can only use the official update with your bootloader locked and a non modified stock rom or you need to wait for a new RUU to come out.
Click to expand...
Click to collapse
-or- s-off if s-off and on the latest ota it doesn't matter if you are locked or unlocked. You will need to flash a custom recovery and su when the ruu is done but the update will complete. You can also downgrade the bootloader (hboot) back to a modified one such as vinyl freaks if and only if s-off.
Sent from my Nexus 7 using Tapatalk HD
dottat said:
-or- s-off if s-off and on the latest ota it doesn't matter if you are locked or unlocked. You will need to flash a custom recovery and su when the ruu is done but the update will complete. You can also downgrade the bootloader (hboot) back to a modified one such as vinyl freaks if and only if s-off.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
If you're s-off, you can flash the firmware on it's own and not have to touch the recovery...
mjones73 said:
If you're s-off, you can flash the firmware on it's own and not have to touch the recovery...
Click to expand...
Click to collapse
True also.....
Sent from my Nexus 7 using Tapatalk HD
to get stock recovery open the zip take the recovery and use fastboot and flash recovery.img right guys?
dcasun said:
to get stock recovery open the zip take the recovery and use fastboot and flash recovery.img right guys?
Click to expand...
Click to collapse
yes... put the recovery.img in the same directory as your fastboot command and from a command prompt (at the same directory as your fastboot.exe) issue the command fastboot flash recovery recovery.img
dottat said:
yes... put the recovery.img in the same directory as your fastboot command and from a command prompt (at the same directory as your fastboot.exe) issue the command fastboot flash recovery recovery.img
Click to expand...
Click to collapse
place the recovery.img in platform tools
type fastboot flash recovery recovery.img
and lock the bootloader
run the update
reunlock the bootloader
flash custom recovery
and done
dottat said:
yes... put the recovery.img in the same directory as your fastboot command and from a command prompt (at the same directory as your fastboot.exe) issue the command fastboot flash recovery recovery.img
Click to expand...
Click to collapse
I was on 605.13 stock ICS, rooted and with Amon Ra recovery. I grabbed the 605.12 recover and flashed it and relocked the boot loader. I have tried multiple times to run the OTA (both pulling from Verizon and by putting it on the SD card). It keeps failing with the same 'Wrong Task ID' error mentioned by OP. I even wiped the SD Card, did clear storage from stock recovery, a couple of factory resets to no avail.
Can someone help? Is it possible that the 605.13 OTA a month or so ago didn't install properly since I had Amon Ra. In Software it shows I am at 605.13 so I doubt that. But would you suggest running the 605.13 Update.zip manually and then try to pull the OTA?
misalies said:
I was on 605.13 stock ICS, rooted and with Amon Ra recovery. I grabbed the 605.12 recover and flashed it and relocked the boot loader. I have tried multiple times to run the OTA (both pulling from Verizon and by putting it on the SD card). It keeps failing with the same 'Wrong Task ID' error mentioned by OP. I even wiped the SD Card, did clear storage from stock recovery, a couple of factory resets to no avail.
Can someone help? Is it possible that the 605.13 OTA a month or so ago didn't install properly since I had Amon Ra. In Software it shows I am at 605.13 so I doubt that. But would you suggest running the 605.13 Update.zip manually and then try to pull the OTA?
Click to expand...
Click to collapse
You will need to relock the bootloader then run the 605.12 RUU and let that boot up and not modify anything then you will get the 605.13 update first and then the latest after that, that is how I got the update and had no problems at all.
I have no os on my phone anymore, i have no idea where to even start. Ive been searching and searching forever now.
S-On
Hboot- 2.28
No Backup and Non-Root as well
Bootloader Unlocked
Is there anything i can do? I know the Hboot 2.28 RUU hasnt came out yet that i know of and researched of as well....Thanks in advance!
Your fine, did you just wipe everything or re-did the ruu?
If your did the ruu than you need to get your recovery back in your phone
If you just wiped everything in recovery than you need to download the ROM you want to use than install the zip in recovery but don't boot into it yet. Pull the battery and boot into bootloader and go into fastboot. Than on your PC take the boot.img file out of the ROM zip you just installed and flash it over ADB.
Fastboot flash boot boot.img
If you need any more help or questions I can continue to help or others will pop in
Edit: IF your trying to get back to just stock than you need to ruu again http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
You need to have a locked bootloader when flashing the ruu,
After downloading the file, rename it to "PH98IMG.zip" (no quotes)
Place the renamed file onto the root of the SD Card
Than boot into bootloader and it should load it up and install it, make sure to just leave it be. The phone might turn off than back on by itself once during the installation and that's normal, it'll continue installing and it will let you know when its finished
Sent from my ADR6425LVW using xda app-developers app
Add a rom zip file to your external sd card via your computer. And install it via yiur custom recovery. If for some reason you don't have a custom recovery, use Odin to go back to stock.
sent from a small tablet aka N2
Ok ive got a ROM installed but every time i try to flash the Boot.img it says "Failed (data transfer failure)"