Help! Micromax Funbook Pro not booting :( ;( - Android Q&A, Help & Troubleshooting
Please help me!
I Rooted my Micromax Funbook Pro Using Unlockroot.
It rooted successfully, i restared so many times after rooting it was all well..
but yesterday i installed clockworkmod recovery for ICS it succeeded, first time my tab booted in CWM recovery mod but no button was functioning , so i rebooted. from then my Tab is stuck on Micromax logo .. nothing happens..
Micromax funbook pro doesn't have hard button of home or menu to boot into recovery.. I searched everywhere how to boot into recovery but found no results.. please tell me the solution.,
Is there any application for pc from which i can reinstall my stock rom without booting my tablet?
Please reply.. :crying: :crying:
thatsgamer said:
Please help me!
I Rooted my Micromax Funbook Pro Using Unlockroot.
It rooted successfully, i restared so many times after rooting it was all well..
but yesterday i installed clockworkmod recovery for ICS it succeeded, first time my tab booted in CWM recovery mod but no button was functioning , so i rebooted. from then my Tab is stuck on Micromax logo .. nothing happens..
Micromax funbook pro doesn't have hard button of home or menu to boot into recovery.. I searched everywhere how to boot into recovery but found no results.. please tell me the solution.,
Is there any application for pc from which i can reinstall my stock rom without booting my tablet?
Please reply.. :crying: :crying:
Click to expand...
Click to collapse
try adb
And reboot recovery
Swyped on my blade
CWM stock recovery
thatsgamer said:
Please help me!
I Rooted my Micromax Funbook Pro Using Unlockroot.
It rooted successfully, i restared so many times after rooting it was all well..
but yesterday i installed clockworkmod recovery for ICS it succeeded, first time my tab booted in CWM recovery mod but no button was functioning , so i rebooted. from then my Tab is stuck on Micromax logo .. nothing happens..
Micromax funbook pro doesn't have hard button of home or menu to boot into recovery.. I searched everywhere how to boot into recovery but found no results.. please tell me the solution.,
Is there any application for pc from which i can reinstall my stock rom without booting my tablet?
Please reply.. :crying: :crying:
Click to expand...
Click to collapse
Micromax has stock CWM recovery built in and can be accessed by keeping the Vol+/Vol- button at the top pressed and then pressing the power button..
I Replaced the product
vNa5h said:
try adb
And reboot recovery
Swyped on my blade
Click to expand...
Click to collapse
Product was not booting (not in recovery mode also) how was i supposed to use adb?
I finally take it to micromax service center they annouced product dead, and handed over DOA policy to me, :silly:
I took that policy letter to Retailer and he replaced the product:good:
(It was only 2day old product)
anyway thanks for the help :fingers-crossed::good:
thatsgamer said:
Product was not booting (not in recovery mode also) how was i supposed to use adb?
I finally take it to micromax service center they annouced product dead, and handed over DOA policy to me, :silly:
I took that policy letter to Retailer and he replaced the product:good:
(It was only 2day old product)
anyway thanks for the help :fingers-crossed::good:
Click to expand...
Click to collapse
adb stands for android debugging bridge ..connect your phone via usb cd into folder containg adb and do adb reboot recovery
Micromax funbook pro stuck on boot image
Hey i got micromax funbook pro and i tried to install clockwork recover mod in it.after rebooting to recovery mode my device is stuck in micromax logo and not moving forward.could anybody tell me what to do now?
Live Suit is the solution
Listen Mr. thatsgamer
You can use the livesuit software for recovering your tablet, even I faced the same issue which i recovered using livesuit
For any information just message me in facebook at: fb.com/AdityaRRayala
If u thought the reply is appropriate and helped anyone kindly fire the thanks button
I Can Help!
thatsgamer said:
Please help me!
I Rooted my Micromax Funbook Pro Using Unlockroot.
It rooted successfully, i restared so many times after rooting it was all well..
but yesterday i installed clockworkmod recovery for ICS it succeeded, first time my tab booted in CWM recovery mod but no button was functioning , so i rebooted. from then my Tab is stuck on Micromax logo .. nothing happens..
Micromax funbook pro doesn't have hard button of home or menu to boot into recovery.. I searched everywhere how to boot into recovery but found no results.. please tell me the solution.,
Is there any application for pc from which i can reinstall my stock rom without booting my tablet?
Please reply.. :crying: :crying:
Click to expand...
Click to collapse
Press Vol+ button + Back Button + Power Button
Don't Hold
Related
Stuck on Canvas HD Logo - Please Help
Hi , Yesterday I tried changing my font using the Ifont application. After doing that my phone restarted and its stuck on the Logo screen. I tried going to the recovery mode but nothing is working. Please help me out.
90Rocker said: Hi , Yesterday I tried changing my font using the Ifont application. After doing that my phone restarted and its stuck on the Logo screen. I tried going to the recovery mode but nothing is working. Please help me out. Click to expand... Click to collapse No worry bro !! Just download 4.2.1 custom firmware and flash it via SP Flash Tools. For more Information, Go to : http://micromaxcanvas.co.in/upgrade-canvas-hd-from-v4-1-2-to-v4-2-1/ Hit thanks :good: if answer helped you
90Rocker said: Hi , Yesterday I tried changing my font using the Ifont application. After doing that my phone restarted and its stuck on the Logo screen. I tried going to the recovery mode but nothing is working. Please help me out. Click to expand... Click to collapse U hv to boot into Recovery Mode......der is no other way..... Press Vol Up+Vol Down+Power OFF to get into Recovery Mode If U hv a Nandroid Backup......then u cn use Restore option......or else u hv to flsh d stock ROM.......
I went to the service center and they upgraded my OS from 4.1.2 to 4.2.1 its resolved. thanks for your reply. next time will try to do by myself.
[Q] How to save my canvas HD (A116) stuck in BootLoop
Hi guys, i'm a bit of a noob and new to these things. My Canvas HD (A116) is stuck in a Boot Loop and not even going to recovery mode. History:- I had rooted my Canvas HD, installed Carliv touch recovery-2 and tried Cynogenmod Port and JellyXperia-V6, afterwards I restored my phone using ClockWorkMod recovery backup I made earlier. Then Problem Occurred when I reset my phone using "Factory Data Reset" in settings, since then the phone is stuck in bootloop- it just shows the CANVAS HD flash then Carliv Recovery Processing loop and this keeps repeating again & again. The trouble is that the USB connector of my phone has also become faulty. Any advise to what can I do? OR should I take it to micromax service center???
Flash stock firmware With this tutorial http://forums.droidbeans.com/microm...)-(stock-recovery)-for-micromax-a116-hd/?wap2 Hope u helped u Sent from my GT-S5282 using Tapatalk
ArshArora said: Flash stock firmware With this tutorial forums.droidbeans.com/micromax-a116-canvas-hd-rom-index/(stock-rom)-(stock-recovery)-for-micromax-a116-hd/?wap2 Hope u helped u Sent from my GT-S5282 using Tapatalk Click to expand... Click to collapse Thanks for the reply but the USB port of my canvas A116 is also causing problem and I can't get a stable connection. Any other advise???
Use traditional method (SP Flash Tool) Raveesh Delhi said: Thanks for the reply but the USB port of my canvas A116 is also causing problem and I can't get a stable connection. Any other advise??? Click to expand... Click to collapse Use sp flash tool... Video link for it http://m.youtube.com/watch?v=7pCiWR_H7wc Enjoy bro!! Hope it will help you.
Raveesh Delhi said: Hi guys, i'm a bit of a noob and new to these things. My Canvas HD (A116) is stuck in a Boot Loop and not even going to recovery mode. History:- I had rooted my Canvas HD, installed Carliv touch recovery-2 and tried Cynogenmod Port and JellyXperia-V6, afterwards I restored my phone using ClockWorkMod recovery backup I made earlier. Then Problem Occurred when I reset my phone using "Factory Data Reset" in settings, since then the phone is stuck in bootloop- it just shows the CANVAS HD flash then Carliv Recovery Processing loop and this keeps repeating again & again. The trouble is that the USB connector of my phone has also become faulty. Any advise to what can I do? OR should I take it to micromax service center??? Click to expand... Click to collapse OK so as the recovery is accessible by u Flash som other ROM 4 nw Nd thn download a flashable zip of stock Nd thn flash it
Rooted Canvas HD stuck on logo I rooted my Canvas HD and installed SamFlare V5.1 ROM on this, I tried to increase my phone storage using Re-Partition.apk and after that I reboot into recovery, it shows error and when I tried to restart it, it stuck on CANVA SHD logo. Please help.
Bheem_Singh said: I rooted my Canvas HD and installed SamFlare V5.1 ROM on this, I tried to increase my phone storage using Re-Partition.apk and after that I reboot into recovery, it shows error and when I tried to restart it, it stuck on CANVA SHD logo. Please help. Click to expand... Click to collapse You need to flash the files given in the thread using SP Flash Tools !!
Bheem_Singh said: I rooted my Canvas HD and installed SamFlare V5.1 ROM on this, I tried to increase my phone storage using Re-Partition.apk and after that I reboot into recovery, it shows error and when I tried to restart it, it stuck on CANVA SHD logo. Please help. Click to expand... Click to collapse Bheem I hope your problem has been solved. As for my problem, my device is unsavable.
try wiping dalvik cache otherwise reflash after clearing all the necessary things
Without working usb connection, you should not try flashing different roms. I lost Samsung galaxy i5000 due to same problem. I didnot have button combination option to go to recovry. However your device can survive. 1. Turn off the phone by removing battery. 2. Press and hold the Power button along with both the ‘Volume +’ and ‘Volume -’ buttons until the screen displays two options.(volume keys first then power key . after 5-10 seconds holding, Then 2 option will appear) 3. Press the ‘Volume +’ button to enter Recovery Mode. wipe dalvik, data, cache partion. install MIUI or pure xperia z2(my choice only, you can try any stable rom) from your memory card. This should work and get usb repaired aSAP.
Hey guys I have Micromax A114. It just won't boot up. No logo nothing. When I connect it to my laptop it keeps connecting and disconnecting. Please help me guys. Can't even flash stock ROM as the phone keep disconnecting. Can't go to fastboot or recovery. Its bricked
You can always go to the Service Center but they will not touch your mobile because your phone is rooted .. If you unroot it also it will have traces so going to service center is a bad idea
[Q] Not booting into recovery mode
My Canvas nitro is not booting into recovery mode. I rooted the device to install MiUI ROM using Kingo root. Also by using mobile uncle tools I tried to install TWRP, but instead of booting into recovery mode, it is fall into a loop shoeing the starting screen i.e screen showing "Micromax powered by Android". IF I release Volume UP and Power button , it is rebooting into normal mode. Please help.. I need to install custom rom in my Canvas.
Try installing CWM recovery through Mobile Uncle Tools and then try going into recovery mode. Use Philz recovery if any issues arise with CWM recovery. Links to download both the recoveries can be found in the forum. Do revert back if any issues persists. Hit thanks if i helped.
Sam prblm bro .......
my a311 is showing com.android.phone has stopped continuosly also it is not opening recovery mode now how do i hard reset it ??
i had the same problem. What you have to do is boot into fastboot and then flash recovery.Keep doing this till it succeeds. It took me 5 tries to actually get the recovery up and running. Wipe all the data in the internal storage and flash a new rom.
gnujozef said: My Canvas nitro is not booting into recovery mode. I rooted the device to install MiUI ROM using Kingo root. Also by using mobile uncle tools I tried to install TWRP, but instead of booting into recovery mode, it is fall into a loop shoeing the starting screen i.e screen showing "Micromax powered by Android". IF I release Volume UP and Power button , it is rebooting into normal mode. Please help.. I need to install custom rom in my Canvas. Click to expand... Click to collapse Flash the new twrp recovery using rashr tool. I Hope it will work Feel free to ask if you get any trouble.
Gt s7262 white screen dead
Hi i bought a new samsung galaxy ace 3 but it is also known as gt s7262 i am running andriod jelly bean 4.1.2 i rooted mu phone using kingo root computer app and then i wanted to install custom roms but i heard u should have recoveries installed so i tried to install CWM recovery on by phone using andriod app FLASHFY i flashed cwm recivery and restarted my phone it goes into somthing like andriod system recovery 3e i have four option: 1)wipe cache partion 2)factory reset 3) reboot 4) apply update from adb I restarted my phone several times but as it show samsung logo in boots directly into this recovery thing. When i press home+volume up+power up button it boots in nothing just a white screen apperas and restarts and boots again into wht called system recovery. plz help me plz plz plz i really need ur help i am new of xda plz.
Gionee p3 troubleshooting
hi everyone , question: what can i do when my gionee p3 got stuck at 'gionee logo' and cwm recovery is also not working ? detail: I tried to flash TRPW.ZIP file using cwm recovery and after reboot phone get stuck at company logo and when tried to open cwm using vol up+power button phone started flashing i.e cwm is not opening. i tried to use adb and run the command ‘adb reboot bootloder' but it shows ‘waiting for device’ and some times 'null device found' . i also used odin but my phone is not getting decected. I was using stock jelly bean rom and my device was roooting. IF YOU WANT MORE DETAILS THEN I CAN SHARE IT. I HOPE YOU GUYS WILL HELP ME Please note that iam not an advance user but i know some little things about rooting. (Iam new to xda so, if their is any mistake in the question then iam sorry)