My phone is stuck on CM logo after installing cm10 on neo v. Help please.
Monkey D.Luffy said:
My phone is stuck on CM logo after installing cm10 on neo v. Help please.
Click to expand...
Click to collapse
Flash the kernel that comes in the download.
Using fastboot
Code:
fastboot flash boot boot.img
read the installation instructions and follow each step for installing CM10.
u need install recovery, wipe, install rom, flash kernel, power it on, turn wifi on, reboot into recovery and flash gapps.
Related
Hello there,
I have recently attempted to install a custom ROM on my Xperia U . I rooted using bin4ry , then unlocked bootloader. Everything was fine up to that point. Then I tried to use RecoverX to install CWM. The tool said it was a success, but device could not boot into recovery.It looked like the tool did nothing. I then found a custom kernel by AOKP that had CWM Recovery in it. I flashed and got recovery , but stuck in bootloop. I recovered from this by flashing B.10 stock firmware on my Xperia U using flashtools. I am now looking for ways to install CWM recovery safely.
What's the best way to install CWM in my current situation?
What caused the bootloop I experienced(out of curiosity)?
digar4o said:
Hello there,
I have recently attempted to install a custom ROM on my Xperia U . I rooted using bin4ry , then unlocked bootloader. Everything was fine up to that point. Then I tried to use RecoverX to install CWM. The tool said it was a success, but device could not boot into recovery.It looked like the tool did nothing. I then found a custom kernel by AOKP that had CWM Recovery in it. I flashed and got recovery , but stuck in bootloop. I recovered from this by flashing B.10 stock firmware on my Xperia U using flashtools. I am now looking for ways to install CWM recovery safely.
What's the best way to install CWM in my current situation?
What caused the bootloop I experienced(out of curiosity)?
Click to expand...
Click to collapse
AOKP is not stock rom..
so its kernel is also not based n stok rom...thats why you got bootloop...
just download kernel which is based on sock rom like trancsend kernek...or phantom...
if you have jb then experimenatal kernel will be best....
and use flashtool to flash kernel...it is the easiest way to flash kernel..
all this kernels are prerooted and has cwm 6.x.x recovery.....
you will get this kernels in devlopment section....
Thank you!
Got it working!
I started off by installing transcendence kernel for stock ROMs. That went flawlessly and so I was presented with CWM recovery(which I started by repeatedly pressing Vol- when the transcendence logo comes up). Went to look for a ROM and found MIUI v4 for Xperia U, followed the instructions and flashed with CWM recovery.Very beautiful ROM. I got all my files from the Xperia U Development section.
Thanks for your help and a big thank you to the developers who make this possible. highfive:
digar4o said:
Got it working!
I started off by installing transcendence kernel for stock ROMs. That went flawlessly and so I was presented with CWM recovery(which I started by repeatedly pressing Vol- when the transcendence logo comes up). Went to look for a ROM and found MIUI v4 for Xperia U, followed the instructions and flashed with CWM recovery.Very beautiful ROM. I got all my files from the Xperia U Development section.
Thanks for your help and a big thank you to the developers who make this possible. highfive:
Click to expand...
Click to collapse
Most kernels nowadays have light notification or vibration or borh for the time you need to press the volume button for cwn, if yours does you only need to press it once within 3 seconds.
hello friends wanted to know if I could help with a rom I put my htc Rezound which was its official rom 4.0.3 with locked bootloader unlock with which HTCDev because my wifi and bluetooth problems and change the boot.img and the cell was bricked me in htc screen and there is no step more, then install android systen recovery and install the rom you liquidsmooth and kenel funky but the Rezound stays in the animation of the rom and there does not pass I wonder if someone could help me I'm s-on bootloader unlock if any rom that works well with me these try installing an exe ruu but I think the 115 Error error loading the image. Thanks I hope to fix my htc.
What recovery did you use? Did you ever flash the boot.img after flashing the ROM? Also, you can't run a RUU without really being S-OFF. If you want some good ROMs, try out Chucktr's CM 11, bunchies Liquid smooth 3.2, or some other newer ROMs. Any should do. But after flashing them in recovery. You have to flash the boot.img manually in fastboot. Or else you will be stuck on boot logo forever. If you want to get back to stock, we can do that after you get booted.
Sent from my HTC One M8 Running Paranoid Android. S-OFF.
pball52998 said:
What recovery did you use? Did you ever flash the boot.img after flashing the ROM? Also, you can't run a RUU without really being S-OFF. If you want some good ROMs, try out Chucktr's CM 11, bunchies Liquid smooth 3.2, or some other newer ROMs. Any should do. But after flashing them in recovery. You have to flash the boot.img manually in fastboot. Or else you will be stuck on boot logo forever. If you want to get back to stock, we can do that after you get booted.
Sent from my HTC One M8 Running Paranoid Android. S-OFF.
Click to expand...
Click to collapse
Cm11 install the rom,gapps and your boot.img with this rom in the list of downloads to make the wipes and install everything and install the boot.img from fastboot and start tefono becomes trapped in the circle of blue animation like liquidsmooth know what would be the problem
DrakoVains said:
Cm11 install the rom,gapps and your boot.img with this rom in the list of downloads to make the wipes and install everything and install the boot.img from fastboot and start tefono becomes trapped in the circle of blue animation like liquidsmooth know what would be the problem
Click to expand...
Click to collapse
Always ALWAYS extract boot.img from rom zip and use it.
Snuzzo said:
Always ALWAYS extract boot.img from rom zip and use it.
Click to expand...
Click to collapse
Push the boot rom but still I stay in the blue circle with the name of CyanogenMod in an infinite animation that does not happen there is a splash screen, try changing the put recovery v2.7.1.0 and good while trying to clean I get the factory reset: factory reset failed, then all is well wipe cache, data, system.davilk install the rom fine but when installing i get GASPP failed, will try to update the recovery to see if that's, if you think you know where is my mistake I could say? thank you
thanks and could solve my problem this way: install the TWRP recovery-2.7.0.1-OpenRecovery-vigor.img is that I could run to perfection only thing I did not wanted to install gapps.4.4.4 then me DOWNLOAD the gapps4.4.4 (standard) cache.davilk wipe, data, system. all well factory reset then install the rom cm-11-20140605-UNOFFICIAL-standart vigor.zip and gapps, clear cache went back to bootloader and install the boot.img reincie and ready. thanks!!!:victory:
Hi All,
I am new to the forum and new to rooting. I did loads of reading and thought that I would give rooting a go on my Sony Xperia Z Ultra. After rooting, and doing dual boot install I downloaded Dirty Unicorns 4.4.4 and Gapps. Booted into recovery and flashed the two zip files. After booting up the rom, it keeps crashing and giving a systemui fail / crash message. So I cannot do anything with the rom because the message comes up a second after I close it.
Not only that, there is now no custom recovery on my phone. Has anyone else been in this situation or can anyone please let me know what I can do to either flash a custom recovery?
I have also tried connecting my phone to the Flashtool to flash the stock rom, however as soon as I connect my phone to my pc it boots the system up and doesnt allow me to go into flash / fastboot mode.
Please help!
Thanks,
RJ
Hi,
I will have your thread moved to your device section.
Good luck!
Darth said:
Hi,
I will have your thread moved to your device section.
Good luck!
Click to expand...
Click to collapse
Thanks! Didnt know where to post.
Recovery should be included in the ROM (I've not flashed it though to test)
press the vol. up key just after booting when the LED turns purple should do the trick.
Do you want to load another custom ROM [1] or go back to Stock Sony [2]?
[1] Download custom ROM, flash boot.img in fastboot, flash ROM from recovery with wipes
[2] Download a FTF and flashtool (http://flashtool.net), flash FTF - fully clean Sony system again
RJacobz said:
Hi All,
I am new to the forum and new to rooting. I did loads of reading and thought that I would give rooting a go on my Sony Xperia Z Ultra. After rooting, and doing dual boot install I downloaded Dirty Unicorns 4.4.4 and Gapps. Booted into recovery and flashed the two zip files. After booting up the rom, it keeps crashing and giving a systemui fail / crash message. So I cannot do anything with the rom because the message comes up a second after I close it.
Not only that, there is now no custom recovery on my phone. Has anyone else been in this situation or can anyone please let me know what I can do to either flash a custom recovery?
I have also tried connecting my phone to the Flashtool to flash the stock rom, however as soon as I connect my phone to my pc it boots the system up and doesnt allow me to go into flash / fastboot mode.
Please help!
Thanks,
RJ
Click to expand...
Click to collapse
Can you clarify what you mean by "doing dual boot install", are you referring to the multirom mod or something else.
Did you unlock your bootloader?
Because I see no mention of that and when I flashed scrubbers port of kitkat via twrp it bricked my ultra and I had to buy a new one.......
blueether said:
Recovery should be included in the ROM (I've not flashed it though to test)
press the vol. up key just after booting when the LED turns purple should do the trick.
Do you want to load another custom ROM [1] or go back to Stock Sony [2]?
[1] Download custom ROM, flash boot.img in fastboot, flash ROM from recovery with wipes
[2] Download a FTF and flashtool (http://flashtool.net), flash FTF - fully clean Sony system again
Click to expand...
Click to collapse
Hey how to unlock the bootloader in sony phones and after its unlocked how to go to fastboot mode..
HI Friends, my z ultra stuck with sony logo.
i've tried to install custom rom. i did wiped sustem,accidently.
my phone was unlocked bootloader, rooted and installed dual recovery.
PLEASE HELP ME.
ARUNNREVA said:
HI Friends, my z ultra stuck with sony logo.
i've tried to install custom rom. i did wiped sustem,accidently.
my phone was unlocked bootloader, rooted and installed dual recovery.
PLEASE HELP ME.
Click to expand...
Click to collapse
You wiped system so yes of course you are stuck on the sony logo. You need to flash a rom to have a system to boot to.
Download any rom and boot to recovery and plug-in your usb cable to mount mtp storage and push the .zip file. Remove the cable and flash the rom.
Example of rom
http://forum.xda-developers.com/xperia-z-ultra/development/rom-c6833-hybrid-rom-t3157992
http://forum.xda-developers.com/xpe...m-xperia-z-ultra-pre-rooted-firmware-t3149504
or flash an .ftf stock rom if you want full stock rom
Yeah just flashtool ftf it happens to me.
thank you super user. i'll try to flash.
my phone won't boot recovery mode. how to boot recovery?
thanks lot.
I installed Evolution X 5.9 and my Lineage Recovery is missing. I tried to install again the recovery image and it didn't install. I went to bootlooping the fastboot logo. Any help?
What do you mean by bootlooping the fastbokt logo, it won't stay on the fast boot or it keeps cycling
Kenora_I said:
What do you mean by bootlooping the fastbokt logo, it won't stay on the fast boot or it keeps cycling
Click to expand...
Click to collapse
I already solve it. But one thing is not clear to me. When I install PE recovery and install custom rom, after installing the rom, my PE recovery change to Lineage Recovery. How does this happen?
Recovery is currently part of boot.img
The alternative recovery must be on the ramdisk.
haniels6x said:
I already solve it. But one thing is not clear to me. When I install PE recovery and install custom rom, after installing the rom, my PE recovery change to Lineage Recovery. How does this happen?
Click to expand...
Click to collapse
Some roms including recovery installation, Such as Xperience rom when you flash it successfully it will change your recovery to Xperience recovery.
haniels6x said:
I already solve it. But one thing is not clear to me. When I install PE recovery and install custom rom, after installing the rom, my PE recovery change to Lineage Recovery. How does this happen?
Click to expand...
Click to collapse
Cuz Recovery of RMN10 is inside the boot image. Therefore when u flash new ROM, if the Dev placed other Recovery inside boot.img , then ur recovery will be changed to that one.
Oke oke. All good now. Thanks for the help guys! Much appreciated!