Kitchen sink tried AOKP and CNA need help with some features ! - Motorola Photon 4G

hello all respected developers,
your contributions to the photon 4g community and to the android community is wonderful. I hope I won't be pissing you guys off with my questions. Feel free to delete the post if you think its already asked and not worth it.
I'm what you would call a typical end user. Have only basic knowledge about flashing roms and I'm a huge motorola fan. Not the software but only the hardware they give.
Ok now for the questions and problems I face with the roms.
1. I installed AOKP rom with the newest and latest kitchen sink (kitchensink-v2.11-photon7). Installed perfectly.
=>After I installed the rom I wanted to take a picture with my camera, and i dont use an external SD card so i wasnt able to take picture with my camera because near the camera click button it kept saying "you need sd card" which I don't have and would not like to buy a new one.
I feel about 8 gb internal storage is more than enough for a cell phone and don't want to waste anymore money buying useless accesories.
How can I fix this?? I checked the aroma installer there is no option for use EMMC as primary storage. How do I turn my internal storage as the primary storage.
2.Now I thought i would give CNA rom a try, i installed it went perfectly well. Now I went into settings storage and storage configuration just like thebill said, and clicked on the option that says to use internal storage and rebooted phone, now camera works fine here.
=> BUT in this rom there is another problem, i go into settings and try to click on the mobile networks (because i want to edit APN and stuff) what i get is an error that says exactly this "Unfortunately the process com.android.phone has stopped" .
3. Now everyone says cm9 works very well is very stable. Now i want to see this cm9 for myself. so i downloaded " beta 0.8.1 AROMA - 23/08/2012 8:01pm EST " from www(dot)jokersax.com/developer-pages/jokersax/cyanogenmod9-photon/ It is aroma based so install it directly with full wipe and reboot phone after installing I get stuck in the "dual core technology screen" . I tried various suggestions given here for boot loop problem i cleared cache and data did factory reset try install it again still stuck in boot loop.
now out of these 3 problems solve any 1 for me please.
thanks in advance

CM9 does work well. But, I tried the Aroma version myself and had issues so maybe try one of the others first.

rituel said:
hello all respected developers,
your contributions to the photon 4g community and to the android community is wonderful. I hope I won't be pissing you guys off with my questions. Feel free to delete the post if you think its already asked and not worth it.
I'm what you would call a typical end user. Have only basic knowledge about flashing roms and I'm a huge motorola fan. Not the software but only the hardware they give.
Ok now for the questions and problems I face with the roms.
1. I installed AOKP rom with the newest and latest kitchen sink (kitchensink-v2.11-photon7). Installed perfectly.
=>After I installed the rom I wanted to take a picture with my camera, and i dont use an external SD card so i wasnt able to take picture with my camera because near the camera click button it kept saying "you need sd card" which I don't have and would not like to buy a new one.
I feel about 8 gb internal storage is more than enough for a cell phone and don't want to waste anymore money buying useless accesories.
How can I fix this?? I checked the aroma installer there is no option for use EMMC as primary storage. How do I turn my internal storage as the primary storage.
2.Now I thought i would give CNA rom a try, i installed it went perfectly well. Now I went into settings storage and storage configuration just like thebill said, and clicked on the option that says to use internal storage and rebooted phone, now camera works fine here.
=> BUT in this rom there is another problem, i go into settings and try to click on the mobile networks (because i want to edit APN and stuff) what i get is an error that says exactly this "Unfortunately the process com.android.phone has stopped" .
3. Now everyone says cm9 works very well is very stable. Now i want to see this cm9 for myself. so i downloaded " beta 0.8.1 AROMA - 23/08/2012 8:01pm EST " from www(dot)jokersax.com/developer-pages/jokersax/cyanogenmod9-photon/ It is aroma based so install it directly with full wipe and reboot phone after installing I get stuck in the "dual core technology screen" . I tried various suggestions given here for boot loop problem i cleared cache and data did factory reset try install it again still stuck in boot loop.
now out of these 3 problems solve any 1 for me please.
thanks in advance
Click to expand...
Click to collapse
The kitchen sink rom has not been updated in a very long time. All of the roms included are based on our ICS builds. We have since moved onto JB and most will say that our JB roms are much more stable than ICS roms. I would suggest downloading the jelly bean versions of AOKP and CNA and trying them out as they are in active development and getting more stable every week. You will have a better experience with these.

i have more questions now coz of my careless button pressing i formatted emmc in the cwm and now i dont have any files in internal storage and i formated system, cache data etc etc everything full wipe. But i still have cwm recovery and i can boot into it, My question is how do I move files into the internal storage of my mopho with CWM?

rituel said:
i have more questions now coz of my careless button pressing i formatted emmc in the cwm and now i dont have any files in internal storage and i formated system, cache data etc etc everything full wipe. But i still have cwm recovery and i can boot into it, My question is how do I move files into the internal storage of my mopho with CWM?
Click to expand...
Click to collapse
Should be able to go into mounts and storage and select mount emmc or sdcard and connect your phone to your computer. Then you'll be able to put files onto it. I noticed you said you didn't have an sdcard? Are you sure? My photon came with a 2gb sdcard already installed if I'm not mistaken. If its there, choosing to mount usb storage will work too.

well **** it..im gonna install jb like u guys said. Since ics development is stopped i hope gsm works in the new jb.
the mount usb storage doesnt work in cwm get some error (some unable lunfile error) is there way to push files using fastboot?

hi, i just bought an sd card lol and mounted it and installed cm9 beta. Now i got a problem earlier when i installed CNA i messed with the testing tools and clicked something and from there i lost my GSM signal completely gone (got x mark on the signal bar) and after that i did format system n installed another rom and even in that rom i dont get any signal (get x sign on the signal bar) i dont remember what i pressed exactly does anyone know how i can fix it? in the settings status and signal status it says radio off.

Again, you'll probably have better luck with any of the JB based roms. You'll never wanna go back to ics. Make sure you download the gsm version.
But to fix your current setup, you can try going into phone app and dialing *#*#4636#*#* then ensuring the network type is set to gsm auto prl. Set it to that if its not then reboot. If this doesn't help I don't know how to fix your current setup as I don't know what you changed.

Acvice said:
Again, you'll probably have better luck with any of the JB based roms. You'll never wanna go back to ics. Make sure you download the gsm version.
But to fix your current setup, you can try going into phone app and dialing *#*#4636#*#* then ensuring the network type is set to gsm auto prl. Set it to that if its not then reboot. If this doesn't help I don't know how to fix your current setup as I don't know what you changed.
Click to expand...
Click to collapse
ok i can tell u exactly what i did. in the CNA rom in the system settings there is an option called advanced testing i clicked on that --> next i clicked on "testing settings" ----> then phone information----> then i clicked on run ping test---> then scroll down and its selected as gsm auto(PRL) no worries there---> but then i clicked on turn off radio thats when the problem started ---> even though i turned it back on radio is still turned off any idea how to turn it back on???
EDIT: when dial *#*#4636#*#* before i even type in the last " * " it force closes settings and the dialer too man im kicking myself right now for messing with advanced testing options
EDIT: ok i remember what i else i clicked i pressed the menu button and clicked on select radio band and selected USA band even though i live in india. But there was only one option USA band so now how do i turn back to international???

rituel said:
ok i can tell u exactly what i did. in the CNA rom in the system settings there is an option called advanced testing i clicked on that --> next i clicked on "testing settings" ----> then phone information----> then i clicked on run ping test---> then scroll down and its selected as gsm auto(PRL) no worries there---> but then i clicked on turn off radio thats when the problem started ---> even though i turned it back on radio is still turned off any idea how to turn it back on???
EDIT: when dial *#*#4636#*#* before i even type in the last " * " it force closes settings and the dialer too man im kicking myself right now for messing with advanced testing options
EDIT: ok i remember what i else i clicked i pressed the menu button and clicked on select radio band and selected USA band even though i live in india. But there was only one option USA band so now how do i turn back to international???
Click to expand...
Click to collapse
I am unsure how to get you back to working in your current rom. Again though, doing a full wipe and installing the gsm version of cm10 should fix you right up as long as you wipe correctly. By that I mean, wipe cache, system, data, and dalvikcache before installing. Sorry I can't be of more help, I've never had to tinker with gsm nor have I left the country with my photon.

Acvice said:
I am unsure how to get you back to working in your current rom. Again though, doing a full wipe and installing the gsm version of cm10 should fix you right up as long as you wipe correctly. By that I mean, wipe cache, system, data, and dalvikcache before installing. Sorry I can't be of more help, I've never had to tinker with gsm nor have I left the country with my photon.
Click to expand...
Click to collapse
hmm... so do full system wipe and install cm10 again ok ill try it and edit this post later n see if i can get it back to international GSM bands. If anyone else knows a way to get my phone back to using international gsm bands please tell me !
UPDATE: had to do a rsd lite sbf flash back to stock to get the radio back to default didn't find any other solution really

Related

[Q] the process android.process.acore has stopped unexpectedly

Gtab- Stock 3358.
Previously I had Stock 3358 and rothnics enhancement pack. I installed an app from the market. As soon as I started the app the gtab screen went blank. Then the TapnTap logo as if it was rebooting then within 2 sec I was back at the home screen. If it rebooted it was a heck of a fast reboot.
then I started getting the error. Everything except stock email and settings work. But the error message pops up every few seconds. I can't go to settings and wipe. So I attempted to install stock 3358. it went fine but problem persist. Still can;t go to settings to check version or do a afactory reset.
Any and all help is appreciated.
+1
I had same problem and after debating the right courses to take, I nvflash'ed the device and started over again.
Still would like to understand that caused that error ?
This usually occurs as the result of contacts in your contact folder with blanks in the name fields. Delete any entries with blanks and you should be good to go.
PS. You will get faster resolution if you search before posting as this has been asked and answered several times in past week.
I have same problem...."The process android.process.acore has stopped unexpectedly. Please try again"
I went into my google account, deleted or put names in contacts that didnt have names, rebooted and still having problem. I tried going into the data/data file, but there was no data file to delete as indicated on other threads. There is not an easy to find thread for this problem. Please help or at least direct me.
Thanks!!!
I never had any contacts saved. Regardless I cannot even open the contacts folder to add/delete anything.
I am having problems with, email, contacts, settings. as soon as I attempt to open any of the above it gives the FC message and takes it back to home.
On the other hand I called Gtab support. As soon as I told the probelm the lady asked me if I could go to settings. Once I told her no I cannot she said you have to send the unit back for repair. She said that she helped another individual yesterday with exact same issue.
On aside note I was able to delete most of my apps using ES file explorer.
@Bekit @rothnic or other senior members is there any solution beside nvflash. I am a newbie.
thanks.
I had the same problem in February and fixed it by searching this forum and finding pieces to put together a solution. The rest of this message is what I posted back on 2/24/11. I think the important part is to repartition your SD card and clear all user data. I have had no problems since I did this fix.
Good luck.
I have had my GTablet since early December and have been running the Stock Enhancement since early January. I have had no problems except for a very occasional unexpected stop. It was never a real problem.
Yesterday I started getting the android.process.acore error literally anytime I tried to use any application. To my knowledge, I had not installed anything recently that would account for this.
The good news is that I followed multiple threads here and came up with what seemed to be a reasonable solution.
I installed Clockwork and reset the partition to 2048/0 as suggested by several posts. I also cleared everything that I could clear using their menu.
Then I installed NVFlash which I believe put me back to the plain vanilla factory OS. (I also think this wiped out Clockwork Mod but I'm not positive.)
I got the "update available" message and did the OTA update of the OS.
Then I installed the TnT Stock Enhancement update and applied the Market Fix.
Everything seems back to normal now.
I want to thank all of the forum members who posted the various instructions that allowed me to piece together this solution.
I realize that not everyone has the same issues when problems occur so there isn't one single fix that is right for everyone. I didn't really understand that until I had this problem. I feel lucky that I've had relatively no problems.
I have to admit that I'm looking carefully at the Motorola Xoom because I suspect it has a much more stable hardware/software infrastructure but I would rethink that if the Viewsonic folks would be more forthcoming about their plans to support upgrades for the GTab. I can live without 3G if I have stability.
Thanks again to all of you experts out there in xda-developers forumland.
Stuck SD card
I am having the same problem and tried to do the restore from the SD card and now the card is in the slot and I cant access the settings to eject it. to run the clockwork mod is there any way to force it to boot the clockwork mod?
For me, Clockworkmod "wipe data/factory reset" eliminated the pesky force close message about android.process.acore that several of us seem to have. NVflashing & Contacts data field corrections did not work for me. The problems seemed to come up after downloading an app from market.
Running VEGAn 1.00 beta 5.1.1 supplement, and happy!
got this last night/this morning as well. from other parts of the forum i went with the fix of using titanium backup to wipe data related to contacts (believe there were three separate items, contacts, contact synch, and something else). btw, I am running VEGAn 5.1.1.
after wiping the data, everything has appeared normal.
hope that helps.
I called CS yesterday. They help me delete most of the apps that I downloaded to see if that will fix the issue. That also helped in eliminating any personal data left behind in case I have to RMA the unit.
that makes my tablet completely stock. I don't have market any more. So can't get clockwork rom manager etc. Bigger probelm is the onscreen keyboard doesn't work either gives the error message.
I did some reading on how to NV Flash the device. Still trying to understand the process.
I have two options
1. NV flash the device and hope that everything still works.
2. I bought sears insruance. Just return the device and then be done with it.
Any help is much appreciated.
My experience level is limted to flashing stock and enhancement packs using the Power and + buttons.
You don't want to use the clockwork in Rom Manager. It doesn't work for the G Tablet.
Here are a couple other options off the top of my head...
1) cwmod for install from Micro SD card http://forum.xda-developers.com/showthread.php?t=865245
2) Try calkulin's format all http://forum.xda-developers.com/showthread.php?t=985705
flanghor said:
For me, Clockworkmod "wipe data/factory reset" eliminated the pesky force close message about android.process.acore that several of us seem to have. NVflashing & Contacts data field corrections did not work for me. The problems seemed to come up after downloading an app from market.
Running VEGAn 1.00 beta 5.1.1 supplement, and happy!
Click to expand...
Click to collapse
same thing with me. I downloaded a few apps and then I got it. Did the data wipe thing. Came back in and I am still getting the error. Not happening every 5 seconds, but still getting it.
okay, this is strange. I did the data wipe and I was still getting this error. After doing the market fix and got all my downloads available, I noticed that I am only getting this error when I hit the HOME button.
I hit the Home button and the error comes up, then the Android Market comes up. This only happens now when I hit the Home button. Error, Market comes up and I have to hit the Home button again to get home.
HELP!
only the home button
confirmed. Working on this the last 30 minutes, I am only getting this error when hitting the home button.
@ K J Rad
I downloaded caulkins format all zip. Now this may sound a silly question. Do I flash it like changing its name to update.zip and include the recovery file?
2nd question is if I am able to flash it successfully can I install the stock rom?
hipBob said:
got this last night/this morning as well. from other parts of the forum i went with the fix of using titanium backup to wipe data related to contacts (believe there were three separate items, contacts, contact synch, and something else). btw, I am running VEGAn 5.1.1.
after wiping the data, everything has appeared normal.
hope that helps.
Click to expand...
Click to collapse
Just wanted to say this single step worked for me as well.
Ok. Finally got rid of the problem.
First I attemted NVFlash. After some intial strugle setting up the drivers etc on windows got it to work. Everything worked but still had the exact same process.
B/w I noticed superuser still there. I thought NV Flash will bring it to out of box. Used Bekits image.
After some more reading took the plunge and did CWM internal. Dide wipe data. Rebooted and got it working again.
Again pardon my ignorance but do I have to manually update to 3358. And if I do it go stock would it get rid of CWM. How do i get it off the machine?
I would like to prepare for the OTA.
Please advise.
B/w it was fun going through the process.
Ok. Finally got rid of the problem.
First I attemted NVFlash. After some intial strugle setting up the drivers etc on windows got it to work. Everything worked but still had the exact same process.
B/w I noticed superuser still there. I thought NV Flash will bring it to out of box. Used Bekits image.
After some more reading took the plunge and did CWM internal. Dide wipe data. Rebooted and got it working again.
Again pardon my ignorance but do I have to manually update to 3358. And if I do it go stock would it get rid of CWM. How do i get it off the machine?
I would like to prepare for the OTA.
Please advise.
B/w it was fun going through the process.
Glad you got it working. Installing the stock 3588 update will replace the bootloader and removes CWM. That should leave you as close to real stock as you can get.
Oh, and welcome aboard ;-)
hipBob said:
got this last night/this morning as well. from other parts of the forum i went with the fix of using titanium backup to wipe data related to contacts (believe there were three separate items, contacts, contact synch, and something else). btw, I am running VEGAn 5.1.1.
after wiping the data, everything has appeared normal.
hope that helps.
Click to expand...
Click to collapse
Thank you very much, that was an incredibly painless fix. Worked on TnT-Enhanced v3.1.4b

Media Scanner issue on all cm10 based roms

Hi,
This is a unique kinda problem (not very unique actually but only faced by couple of people) on any cm10 based rom I have tried till now.
The issue is that after I properly flash the rom (yes, I have double checked and flashed roms exactly following OP's instructions in all cases), I find that pre-existing media files (pictures,music and videos) are not getting scanned at all and added to the stock gallery/music app. if I take any picture or upload any media using MTP with the rom, its added properly.
So, I have tried all suggestions (fixing permission, full wipe, delete .nomedia etc) and still no solutions. I am sure that the issue is with mediascanner and I have monitored it and found that eventhough I manually stop and start it using "Rescan Media ROOT", after runnnig for like 20-30 secs, it just says restarting again and again.
Additionally I have also found that when connecting via MTP, eventhough the SD Card and internal memory has alot of stuffs, they are not shown. So I think issue can be with the this also.
I've grown very frustated over last few days due to this and I cannot use any of the amazing cm10 roms that we have and have to go back to my old ics rom.
PLEAZZZ HELP !!!
I also encourage all others who are facing similar issue to post here which would definately help in understanding and fixing the issue.
Thanks !!!
really man? CM10 is not even beta yet. its got bugs. deal with them or use ICS. Im on ICS still due to them.
Complaining about bugs in a build that is so far from being stable, that'll cause trouble.
MotoMudder77 said:
really man? CM10 is not even beta yet. its got bugs. deal with them or use ICS. Im on ICS still due to them.
Complaining about bugs in a build that is so far from being stable, that'll cause trouble.
Click to expand...
Click to collapse
If it would be a bug in the build only, then it should have affected all who are using it, why only few are getting affected.
And yes, I know its not right to complain about still in beta cm10 releases and thats why I'm not bothering any Devs for it. I have started this thread in Q&A so that guys who are facing the issue can match the different conditions/scenarios it is happening as I know its not a coincidence that its happening on some devices and not on others.
dev997 said:
If it would be a bug in the build only, then it should have affected all who are using it, why only few are getting affected.
And yes, I know its not right to complain about still in beta cm10 releases and thats why I'm not bothering any Devs for it. I have started this thread in Q&A so that guys who are facing the issue can match the different conditions/scenarios it is happening as I know its not a coincidence that its happening on some devices and not on others.
Click to expand...
Click to collapse
Its either s/w or h/w man.
And from what I can tell its s/w. so its on them. get logs, and send them in.
Entropy has said to set screen to stay awake while charging in dev options. Then plug your phone into charger and reboot then give it about 15 min. to scan. This is to keep media scanner from eating battery, but you could try it and see if has any effect on your issue.
adfurgerson said:
Entropy has said to set screen to stay awake while charging in dev options. Then plug your phone into charger and reboot then give it about 15 min. to scan. This is to keep media scanner from eating battery, but you could try it and see if has any effect on your issue.
Click to expand...
Click to collapse
That is not at all what he asked...
122ninjas said:
That is not at all what he asked...
Click to expand...
Click to collapse
I assume that this allows for a complete scan which would help. If it doesn't help then what was lost?
http://forum.xda-developers.com/showpost.php?p=30017461&postcount=2348
MotoMudder77 said:
Its either s/w or h/w man.
And from what I can tell its s/w. so its on them. get logs, and send them in.
Click to expand...
Click to collapse
Yes, I do have commonsense and have already posted the issue in CM forum along with logcat, but no replies yet.
122ninjas said:
That is not at all what he asked...
Click to expand...
Click to collapse
Yeah , my issue is completely opposite of what most guys were facing (which is supposedly been solved in latest builds). In my case, mediascanner is not running at all to scan all media.
adfurgerson said:
I assume that this allows for a complete scan which would help. If it doesn't help then what was lost?
http://forum.xda-developers.com/showpost.php?p=30017461&postcount=2348
Click to expand...
Click to collapse
Same thing , this solution is for those whose battery is getiing hit by wakelock and cpu overload due to mediascanner.
dev997 said:
Yes, I do have commonsense and have already posted the issue in CM forum along with logcat, but no replies yet.
Yeah , my issue is completely opposite of what most guys were facing (which is supposedly been solved in latest builds). In my case, mediascanner is not running at all to scan all media.
Same thing , this solution is for those whose battery is getiing hit by wakelock and cpu overload due to mediascanner.
Click to expand...
Click to collapse
I would do a clean install of cm10, and NOT use the root media scanner app, and then follow what entropy said (keep display on while it scans).
Also, go to manage apps and clear data on DRM, Galley, and Media storage. Reboot and then play some music through your favorite file explorer. The Media Scanner will rebuild data in about 10 minutes to half an hour (try to keep screen on if you can)
(Semi quoted from 1weener)
Sent from my SGH-I777 using xda app-developers app
diabolicalangle said:
I would do a clean install of cm10, and NOT use the root media scanner app, and then follow what entropy said (keep display on while it scans).
Also, go to manage apps and clear data on DRM, Galley, and Media storage. Reboot and then play some music through your favorite file explorer. The Media Scanner will rebuild data in about 10 minutes to half an hour (try to keep screen on if you can)
(Semi quoted from 1weener)
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Just tried this as I'm having the same problem, no luck. My music player was working fine yesterday then it decided to forget where all the songs were.
Same problem here with Task's AOKP latest(04/9)
I didnt have any problem with the previous release... BUT:
What i already did:
1- Full wipe to flash the new aokp release.
Tibe restore the rescanMedia Root... didnt touch it.
Media not working
2- Flash again without full wipe. Media not working
searched for .nomedia files. No results.
3- Flash again with another full wipe plus system format.
Checked with no Apps installed, media scan not working.
Installed RescanMediaRoot... didnt work.
After that i quit and decided to sleep. All my work on it was with the phone pluged. I dont know why but after unpluged a few musics show up. Only 40 of 2000. No pics.
4-Full wipe + chache format + System format + flash the previous AOKP release. MEDIA NOT WORKING.
was working yesterday...
5- Nandroid restore to number 3.
Thats where i am now. Stuck with the problem with aparently any JB release.
PS. Any new pic shows on gallery...
RatusNatus said:
Same problem here with Task's AOKP latest(04/9)
I didnt have any problem with the previous release... BUT:
What i already did:
1- Full wipe to flash the new aokp release.
Tibe restore the rescanMedia Root... didnt touch it.
Media not working
2- Flash again without full wipe. Media not working
searched for .nomedia files. No results.
3- Flash again with another full wipe plus system format.
Checked with no Apps installed, media scan not working.
Installed RescanMediaRoot... didnt work.
After that i quit and decided to sleep. All my work on it was with the phone pluged. I dont know why but after unpluged a few musics show up. Only 40 of 2000. No pics.
4-Full wipe + chache format + System format + flash the previous AOKP release. MEDIA NOT WORKING.
was working yesterday...
5- Nandroid restore to number 3.
Thats where i am now. Stuck with the problem with aparently any JB release.
Click to expand...
Click to collapse
I'm still facing the issue with apparently any JB build till now .. right from the first one entropy released as cm10 previes build and trust me , I tried all (well almost)
Now , from your problem it seems that once with some particular way of flashing roms, we do something that causes media scan to get corrupt..
Tell me this .. before when it was working.. have u ever tried going to gallery and then settings ?? I never got that menu on any JB release...
After making too much efforts in vain to get it right , I have resorted to the alternatives :
1. Quickpic as replacement to Gallery app.. Keep the default gallery app running for camera..
2. Poweramp full version as replacement to Music.. It has a folder rescan option under setting and searches all ur music..
3. MX video player for video playback.. However I still find few codecs doesn't support audio till now.. but it is issue with all roms for all people afaik..
Let me know if you find a solution and get it working again...
I'm on AOKP for months. Never used any other rom. Never even installed to see what happens.
So, recently Task release his JB AOKP. It is 1 week older and he released 3 or 4 builds.
The first release i did not installed, The second one was released on same day and i did a full wipe to install it from AOKP ICS.
So far everything was working good.
Then came another release, the 30/08. Installed without a full wipe, just dalvik and cache, and everything was working fine.
From the build 30/08 to the build 04/09 i did bought Tibu Pro.
So i did a full wipe to install the 04/09 and the bug show up as you can see on my previous post.
The weirdest thing is full wiping + format System + format cache + install an old AOKP(30/08) and the bug are still there.
Could be that app RescanMediaRoot? Do you have it?
what do this app do to disable the scan? If we disable and uninstall what happens?
I do have setting options on gallery but when i click it nothing happens. No setting there.
Edited:
I just checked BetterBatteryStats and it looks weird. No kernel wakelocks... not even 1.
The most interesting was the Partial wakelocks:
MediaScannerService is the number one with 12min. Its running but nothing changes.
I dont like poweramp cuz the AwesomeBeats wont work with it.
RatusNatus said:
I'm on AOKP for months. Never used any other rom. Never even installed to see what happens.
So, recently Task release his JB AOKP. It is 1 week older and he released 3 or 4 builds.
The first release i did not installed, The second one was released on same day and i did a full wipe to install it from AOKP ICS.
So far everything was working good.
Then came another release, the 30/08. Installed without a full wipe, just dalvik and cache, and everything was working fine.
From the build 30/08 to the build 04/09 i did bought Tibu Pro.
So i did a full wipe to install the 04/09 and the bug show up as you can see on my previous post.
The weirdest thing is full wiping + format System + format cache + install an old AOKP(30/08) and the bug are still there.
Could be that app RescanMediaRoot? Do you have it?
what do this app do to disable the scan? If we disable and uninstall what happens?
I do have setting options on gallery but when i click it nothing happens. No setting there.
Edited:
I just checked BetterBatteryStats and it looks weird. No kernel wakelocks... not even 1.
The most interesting was the Partial wakelocks:
MediaScannerService is the number one with 12min. Its running but nothing changes.
I dont like poweramp cuz the AwesomeBeats wont work with it.
Click to expand...
Click to collapse
I don't think "rescan Media root' app has anything to do with it .. actually
in my case , I never had this working since the start and at that time I didn't even knew about this app.
I have also noticed the partial wakelocks and if you go to running apps , you will see media storage running when u start a music/gallery app , but nothing happens..
I did tried alot to figure the problem out and seek help from all dev's that I can from this one and i9100 forum , but no results.. So finally I made peace with the workaround I mentioned...
One thing you can try in ur case is full wipe + format system/cache/data and then install a ICS rom.. after reboot.. try any JB rom again....
Good luck !! :good:
dev997 said:
I don't think "rescan Media root' app has anything to do with it .. actually
in my case , I never had this working since the start and at that time I didn't even knew about this app.
I have also noticed the partial wakelocks and if you go to running apps , you will see media storage running when u start a music/gallery app , but nothing happens..
I did tried alot to figure the problem out and seek help from all dev's that I can from this one and i9100 forum , but no results.. So finally I made peace with the workaround I mentioned...
One thing you can try in ur case is full wipe + format system/cache/data and then install a ICS rom.. after reboot.. try any JB rom again....
Good luck !! :good:
Click to expand...
Click to collapse
I'l try that and repport back.
The problem with media on the external SD card I believe is directly due to the change made in the location of the external SD card card within the directory. Many apps were built for ICS and GB and so when the scan is performed, the app isn't picking up the external SD card which used to be found within the internal SD. Now if media scanner isn't finding media within the internal SD card, that is a whole different story. I have media on my internal SD card and it has worked flawlessly. If you have music on the extsd and are using poweramp you can go into setting and check the box for the extsd outside the internal SD storage and it imports fine. Oh, and I'm running the latest AOKP with the Fluxxi kernel.
beaverslayer said:
The problem with media on the external SD card I believe is directly due to the change made in the location of the external SD card card within the directory. Many apps were built for ICS and GB and so when the scan is performed, the app isn't picking up the external SD card which used to be found within the internal SD. Now if media scanner isn't finding media within the internal SD card, that is a whole different story. I have media on my internal SD card and it has worked flawlessly. If you have music on the extsd and are using poweramp you can go into setting and check the box for the extsd outside the internal SD storage and it imports fine. Oh, and I'm running the latest AOKP with the Fluxxi kernel.
Click to expand...
Click to collapse
I do have pics on the Camera360 folder(internal SD) and it wont show on gallery.
I'll wipe everything and flash JB without the external. But i just find out something strange.
Im on recovery right now and using the file explorer of MrRobinson aroma to test it.
looks like the external its NOT on MNT folder. There are not and MNT folder on root. The external is called Sdcard and there is an emmc folder that looks empty.
Is it right? I really dont know nothing about the folder structure.
Edited:
Second time on Aromas file manager the emmc show all files now.
I belive all this means nothing.
Not all file explorers are equal. You need a root explorer to see the folders. Your music if on the internal, should be in the Music folder following the path home/sdcard/Audio/Music. Pictures on internal should be under home/sdcard/DCIM/Camera. When the external sd card is inserted it should show up in three places. At the root of the directory,you will find it as home/extSdCard, then under home/mnt/extSdCard and finally under home/storage/sdcard1. sdcard is the internal memory. I just moved photos to my extSdCard and rebooted the phone and media scanner didn't find them and setting don't exist on the gallery so you can't direct it to the new path of the extSdCard. So, I just replicated what you have been experiencing. If you move your photos to the Camera folder following the path I listed they should show up. The only reason my music works on Poweramp is because I can go to settings and check the sdcard1 folder under storage. Man I hope you don't mind all this rambling I'm doing and I hope I'm not insulting your intelligence.
No you are not. All this is new to me.
Thanks for all the info. It helped me.
Problem is gonne here.
What I did was:
1- clear cache and dalvik
2- data/factory reset
3- format system
4- format cache
5- format data
6- format internal SD
7- installed latest AOKP+ Gapps. Task's gapps don't come with Gmusic so I installed from Justin's Aroma with 1 or 2 inverted and Apex as a system app. But I did installed the normal gapps before try the Aroma.
First boot fine. I did config WiFi and gaccount slowly.
I didn't let the screen turn off.
When I first open the Gmusic everything was there.
Then I installed Titanium backup pro and did my full restore.
Tested another player , Mixzing, and was all there.
I forgot to save any pic on external since I do have Dropbox and it send it to my PC asap. So I didn't worry about pics.
Everything is working!!!!:beer:
Thank you for all your help.
Sent from my SGH-I777 using xda app-developers app

I need to make sure!

Most of you may remember. About a year ago my Vibrant got water damage on the USB port and I have not been able to mount it to a computer since. The last rom I flashed was :
Kernel : 2.6.35.12-gdf10700 [email protected] #1
Mod Version : CyanogenMod-7.1.0.1-Vibrant
Build # : GWK74
And I've kept the phone alive by once a month doing a factory reset, clearing Dalvik and re flashing this rom. I'd know its time cause force close would pop up for EVERYTHING, and if that wasn't the case the phone would lock up shortly after reboot. And I'd normally have to reboot it a few times before I could keep it alive.
Well. It seems that isn't working anymore. The Google Play store keeps locking up, and that's if the phone itself doesn't lock up.
I've had it up to here with this damned phone. I've been patiently waiting for my full upgrade discount and have been drooling over the S Relay. Of course tmo still wants to much for it and I know here in the next few weeks prices will be dropping.
I just need to buy myself a little more time!!!
Listed on the cyanogenmod page, Vibrantmtd? Is that the same as my tmobile vibrant?
With the above listed stats, and without the ability to plug into a computer, what rom should I download?
I had thought that cyanogenMod stopped supporting the Vibrant. But see on their page that I can get 10. Would I need to change my kernel to use it? Or can I put cm-10-20121026-NIGHTLY-vibrantmtd.zip on my sd and install it from recovery?
[EDIT]I'd also like to format or atleast clear the internal SD without being able to plug it in, but I'm thinking this isn't possible?[EDIT]
Please keep in mind that I cannot sync with a PC.
My contract isn't up until march. If this could get me there I'd be soo happy.
Thanks!
Nick
Formatting the internal storage is easy, go to Settings -> Storage, it should have an option to format it. You can also format /sdcard partition in the 'mount and storage' section within CWM.
Since you already have CWM I presume, you can easily install CM10. Just flash a CM10 rom three times. The first time you will get an error. Flash it again and it will reboot. Pull the battery and boot back to CWM, which will now be updated. Flash it the third time and it will work.
I suggest SlimRoms (link in my sig), also install their all-in-one addon. You might also have to set the dpi back to 240 and clear the playstore data and reboot in order to get playstore apps compatible with your device. Or you can install the multi-dpi play store patch.
Sent from my Nexus S
CyanogenMod does still support the Vibrant, it was dropped but reinstated. vibrantmtd is your phone, yes. Also, don't run CM7.1, it's E911 may be completely broken. Keep in mind the disclaimer at the top of the CM10 thread.
If you are interested in a new contract, call T-Mobile loyalty dept. If you've been good with your bill you may be able to sweet talk them into a good deal on a new phone.
Even though its early and your not technically up for a full upgrade, in my experience it can certainly be done...
eksasol said:
Formatting the internal storage is easy, go to Settings -> Storage, it should have an option to format it. You can also format /sdcard partition in the 'mount and storage' section within CWM.
Since you already have CWM I presume, you can easily install CM10. Just flash a CM10 rom three times. The first time you will get an error. Flash it again and it will reboot. Pull the battery and boot back to CWM, which will now be updated. Flash it the third time and it will work.
I suggest SlimRoms (link in my sig), also install their all-in-one addon. You might also have to set the dpi back to 240 and clear the playstore data and reboot in order to get playstore apps compatible with your device. Or you can install the multi-dpi play store patch.
Sent from my Nexus S
Click to expand...
Click to collapse
You are my hero!!!!!!!!!!!!!!!!!!

My thoughts and what i learned so far.

Just a noob sharing some thoughts, hope it can help some other noobs like me.
A no wipe in my book:
Here is how i do a no wipe.
In recovery, mount and storage and choose format system.
Go back and wipe Cache and Dalvik
Install / flash the rom.
A full wipe in my book:
Into recovery, mount and storage and format system, data and cache.
Go back, wipe/ reset data, cache and dalvik.
Install/flash rom
Format of the internal SD:
Here is what i do:
Make a app backup with TB to my external sd
Make a nandroid to my external sd
Make sure i also have a efs backup on my external sd
I only save mods, roms on my internal sd in my download map and this map i move to my external sd.
Then i reboot to recovery.
Mount and storage and format internal sd.
And to be save and have it nice a clean, also format system, data and cache and because i am not only a flashohalic but also a cleanohalic, i then wipe/reset factory reset, cache and dalvik.
Probably a big overkill, but he, done it several times it works for my and it only cause a few seconds.
Then i reboot, skip the setup/registration, move my download map back to my internal sd (don't like flashing from external sd).
Back in cwm, again a full wipe which includes the formats data, system and cache.
Then flash the rom and setting it up.
This way, you have a nice clean fresh S3, but and this is a big BUT.
Backup, backup backup and don't forget a efs backup to your external sd and pc.
Don't think lightly about those backups, when imei is broken and you don't have a backup, your a done, only thing left is a visit to Samsung.
Good luck when you are going for it.
And i know, Aroma installer is also doing some automatic wiping, but i am just a bit old fashion and like to do some stuff manually.
Bootloader.
As you all know, the new bootloader can be a pain in the ass.
But, i am still not sure that Samsung only released the new bootloader just to discourages us to flash custom stuff.
So, if you like flashing stuff and you are on the new bootloader like me, just remember when you entered recovery and you are done flashing stuff, use Triangle Away from Chainfire,
But, for some, like on my wifes phone, the latest version works without problem, but on my S3, i need to use the older version, 2.37, why, don't have a glue.
Not all S3 are the same, although have the same name and using the same chipsets.
But you can also use the old bootloaders, with does, you just have to run Triangle Away just once, when entering recovery, it will not count.
Your own choose.
About Sudden Death.
A lot of threads are open for this.
My 5 cents:
I have the "sudden Death" chips VTU00M chip with 0xf1 on both our phones.
Mine is running since 27 may 2012 without problems, still fast and smooth.
The other is up and running since 31 Augustus 2012 and also still fast and smooth.
Both have been rooted from day one, the only thing i do, is turning the devices off completely for a few minutes 4 to 5 times a week.
Old habit to clear memory, anyway, gives me time to do a good cleaning of my screen.
Here is the code to check your revision and to see from which day you are running your S3 *#12580*369#
Further more, AndreiLux found i string in the ELLA kernels released by Samsung that looks like that it solves the sudden death issue.
So, if indeed if fixes this issue, then off course the latest kernels releases from Sammy has also the fix and not just the custom kernels.
As far as i know, all the custom kernels has the fixes integrated this string by now, but i myself like the stock kernels, Indie puts in the Omega Roms.
Phil3759 has also made a repack of recovery based on CWM touch 6.0.2.7 to get it all safe.
More to come in the future, because i am learning everyday here on XDA and like to share and help others.
Edit, here is quote from AndreiLux about the new bootloader:
http://forum.xda-developers.com/showpost.php?p=37163086&postcount=1298
Do I need any particular Bootloader? No - There is no evidence to suggest this fixes anything
Apparently that's wrong, download mode on the device uses a microkernel from inside the bootloader instead of the full blown Linux kernel. When flashing something via Odin in download mode you'd be using the bootloader's MMC driver and thus be at risk.
All-day users are still safe via recovery and live kernel, but are not advised to flash things in download mode with an older bootloader. This also explains why they updated the bootloader in LLA. The security checks are a mere update to bring it up with what the 9305 and Note 2 users already have in terms of not able to get rid of the exclamation mark.
Personal note:
Maybe i am seeing this wrong, to much thinking in terms of home computers, but here is some thoughts regarding above.
From cold, turned off device,.
Turning the device on, micro kernel inside the bootloader kicks in to send information how to start the device correctly.
If it works this way and you are on the old bootloader, then every time you start the device with the old bootloader, you are at risk?
Some useful links:
My struggle with TA
Omega roms S3
Chris_84 Faq
Triangle Away
http://www.chainfire.eu/articles/118/Triangle_Away_vs_Samsung/
Old bootloader
Philz recovery
https://www.google.nl/search?q=andr...s=org.mozilla:en-US:official&client=firefox-a
https://play.google.com/store/apps/details?id=com.electricsheep.asi&hl=nl
https://play.google.com/store/apps/...sIm5ldC52aW5hZ3JlLmFuZHJvaWQuZW1tY19jaGVjayJd
Here i will post stuff that comes along the road like question about batterystats at recovery.
We used to have a option to wipe the battery stats at recovery, also there are some tools at Play store that claims to give a better battery life by just wiping those stats.
But after reading this excellent article, it comes clear that wiping those stats are bull.
So i am glad that option isn't available anymore and perhaps in time, the questions about those stats will faint away in oblivion
And another one i like to share.
Fast Dormancy.
Here is a great article about it, made by Erica.
For me, my provider is saying it's not supporting FD, but when use the method to check, it is supported.
So i tested it for a few days on and off and found that when it's off, i do get some better battery life, but it's just minor.
Instead of losing 5% battery at 8 hours standby, i lost 6%.
Also, i didn't see any benefits in speeds, so i turn it off every time after a flash of a new rom using gokhanmoral tool.
Another thing i like to add.
Wifi.
I have seen many posts about wifi problems.
Here what always works for me.
Sometimes just a reboot of the router will help.
Also, i find changing from dynamic (default) to static that my connection is faster connecting to my router (always use the never setting at wifi advanced to save battery).
Here is how to do it the easy way.
First set it up using it with the default dynamic settings, this way all will be filled in for you.
To change it to static.
Long press your connection and choose modify network config and check show advanced options.
Scroll down a bit and tap on IP settings and choose Static.
And that is all, now you have changed it to static and there is no more need for ip adress to negotiation any more.
https://www.google.nl/search?q=wifi...s=org.mozilla:en-US:official&client=firefox-a
Also if still having problems, adding some more permissions can solve it.
I use root explorer for this
ETC > Long press wifi folder and choose permissions (remember to change Mount R/W to Mount R/O) and check all nine boxes.
Hit back and go to Data > Misc and again long press wifi folder and again, check all nine boxes.
Space
I know, i am a control freak and i hate it when i see space just vanish.
So did some search and found a thumbnail map with more then 1gb size.
Looked at some submaps and i only saw some old stuff.
So, selected all the submaps and just deleted it without problems and gain more then a gb free space.
Here is where you can find it using root explorer:
storage > sdcard0 > .thumbnails.
Edit:
As bigmo7 pointed out, the thumbnails will be rebuild, but off course not off stuff that isn't present on the S3 anymore.
So, if you are someone that is just making pictures or making / creating movies and never delete then from your S3, there is no point off deleting the thumbnails.
But if you like me, moving, creating copying and deleting this kind off stuff, then you can gain space.
Battery life
Always a hot item.
First all, the S3 is a mini computer and computers need juice, just remember this.
Here are some stuff i always do after flashing a new rom.
If the rom comes with a aroma installer which let you select stuff to install or not install, look careful to the list.
Stuff you don't use, can just eat resources and i myself, just find it a waste.
Next, after flashing and setting up the new rom, you will be presented with the option to use wifi.
I always go to advanced when making a wifi connection to choose Never when phone is in standby.
For me, but this can be different for you, wifi is a bit off a drainer so do some testing, let it run overnight with Always selected and another night with Never and see the difference.
Next you will be present if you want to restore and let google backup your phone.
I always deselect backup my phone, first reason, i am a control freak and i decide when and what i want to backup.
And second it can give you wakelocks and this will cost you battery life.
Next step i do is going into settings and to sounds, i don't like the clicking sounds and i deselect all the system sounds.
Next, location services and deselect GPS and Location and Google search.
I want GPS active only when i need it, some apps like Facebook will activate GPS when running and i don't like this.
And i don't want Google to know where i am all the time.
Some weather apps needs Location and Google search to determine your location, but i use Weather pro and it don't need it.
Next step is going into accounts and look what you have selected for syncing.
I always deselect Google photos, Internet and Picasa web albums.
Stuff i don't need .
Location settings at accounts is also off.
Next step is using the Fast Dormancy toggle to disable Fast Dormancy, although my provider is supporting it, enabled costs me a little more juice. Although it's minor, but a lot off minors things makes it bigger .
Then starting Playstore and at settings, deselect Notifications.
And finally freeze stuff i don't use with Titanium Backup pro.
http://forum.xda-developers.com/showpost.php?p=31576747&postcount=105
All this, is giving me a great battery life, with screen on time between 4 1/2 to 6 1/2 hours, depends what i am doing.
And with the latest JB roms, 1 to 2% battery los in 7 hours standby.
No need for me to toggle Airplane mode, mobiledata or some other powersaving setting or app.
I am also always running the stock insecure kernel that comes with the rom, for me no need for a custom one.
Reserved
KeesStolk said:
I only save mods, roms on my internal sd in my download map and this map i move to my external sd.
Click to expand...
Click to collapse
Hello, when we flash a rom that already has mods ... do you know a way to save them ? (where to find them)
I mean. For example, my rom has a mod (and theme) on the toggles (pandoriam i9305). How can I save that mod ? Do you know a good tutorial to learn (safe) modding ?
thorcyar said:
Hello, when we flash a rom that already has mods ... do you know a way to save them ? (where to find them)
I mean. For example, my rom has a mod (and theme) on the toggles (pandoriam i9305). How can I save that mod ? Do you know a good tutorial to learn (safe) modding ?
Click to expand...
Click to collapse
I never save mods because most of the time when flashing a new rom, it's based on a new build and not every time mods are compatible, just like some themes by the way.
I just safe the mod files and thems, when i am sure they are compatible, i just flash them again.
Indie's Omega roms has already a lot of mods in it by default by the way, but i don't think he was for a 9305.
Good work Kees! Now I'm learning from you.
Chris_84 said:
Good work Kees! Now I'm learning from you.
Click to expand...
Click to collapse
Thank you for your kind words, but it is l who is learning from you every day .
Sent from my GT-I9300 using Tapatalk 2
and why dint i see this , brilliant my friend .... one of the best posts , well explained and really good stuff all at one place
thanks my friend
vegeta1 said:
and why dint i see this , brilliant my friend .... one of the best posts , well explained and really good stuff all at one place
thanks my friend
Click to expand...
Click to collapse
Thank you very much, but from you, Chris, Indie and the rest of the omega team are the ones I learn all this great stuff every day.
Sent from my GT-I9300 using Tapatalk 2
i always feel like a noob when ever i read here
big big thanks my friend for pointing out all this so nicely
Very nice posts KeesStolk. Maybe you should write a manual for us?
I'm about to post this in Q&A (searching for an answer brought me here )
I just (3 days ago) upgraded my Omega ROM to v40. All seemed fine - I did as normal but in v35, my last Omega there wasn't a Full Wipe option. I chose not to wipe and everything went as per usual with Omega. I reinstalled my extras (6 x 5 icons, Loud phone hack, Increasing ring phone, Note2 Keybd) and was back to normal.
Except, now my apps will not update.
I found out the hard way. I had a problem with Play Store - open it and it would flash briefly then close. Tried all I knew of but nothing worked so, logic said, Omega v40 is different enough I need a wipe and that why they put it in there as a choice this time. (I checked the Omega thread and couldn't see anything relevant but I was in the pub at the time and may not have been as thorough as I should have been)
I had a TB backup and Nandroid on my ExtSD from 2 days back and an EFS so I ran the install again and chose Full Wipe - again everything went well... until I tried to download TB so I could restore all my apps and data. Play Store opened and stayed Open (yaaaay!) and TB acts like it is downloading but nothing comes through - it just sits until it times out on an error.
I tried several apps and none would DL but then AuWeather DL'd just fine. I went back to TB - no go.
After much frustration I Restored my Nandroid and got back to where I was (Omega v35) but still I can't DL and update for TB. At least Play Store stays open though. I tried running the v40 update again, installing the Default, just in case, (& I have just finished DL'ing v41) but the DL/Update problem persists.
I'm now on:
AP – I9300XXEMA2
CP – I9300BUELK1
CSC – I9300LBEMA1
RF cal – 2012.6.28
HW Rev – MP 1.100
Any ideas? If I can't DL TB once I have flashed, I can't get my data back so a wipe isn't really an option until I fix the DL issues.
As I said, this will also be in Q&A but you seem to have a good grasp on the basics so I thought maybe...? :fingers-crossed:
So... I tried restoring back to v35 and got the same problem. And yet that version has been running since v35 came out, at least a couple of months. So I did it again but this time used the Android Revolution Wipe zip, then a straight install of v35. I could then load TB from Play Store and restore my apps and data. Phone seems back to normal now although I have lost some logs data from the couple of days between my backup and now - no biggie... I also now can update my apps.
So it seems it is something to do with Omega v40.
I've just DL'd v41 so will give that a try. Any help with what might have gone wrong would be much appreciated.
Thank you for your kind words, just sharing what i know and hoping this info can help others.
And how is it with v41?
Did you tried it with wifi and 3g, any difference?
Also tried removing your google account, reboot and setting it up again?
Hi kees !
Nice idea you've got with this thread but ... I hope it won't turn into another omega q&a thread . I would like to direct people here but it will be quite difficult if they will see Omega issues all over. Please point them out to the correct thread as you already posted the link to it. Just a thought , correct me if I'm wrong
Thanx !
Sent from my GT-I9300 using Tapatalk 2
xanthrax said:
Hi kees !
Nice idea you've got with this thread but ... I hope it won't turn into another omega q&a thread . I would like to direct people here but it will be quite difficult if they will see Omega issues all over. Please point them out to the correct thread as you already posted the link to it. Just a thought , correct me if I'm wrong
Thanx !
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Thanks and you are right, but the main purpose for me, is just help others with the noobish knowledge i have and let people and myself learn and share.
I don't mind which rom people are running, that's everyone his or here's choice and i totally respect that.
I think this thread deserves to be in General, since you're not asking anything. Hit "report" and see what a mod thinks about it
KeesStolk said:
Thanks and you are right, but the main purpose for me, is just help others with the noobish knowledge i have and let people and myself learn and share.
I don't mind which rom people are running, that's everyone his or here's choice and i totally respect that.
Click to expand...
Click to collapse
absolutely !!!
everyone`s choice ! but people must follow proper threads , i`ve got nothing against a certain rom but against disarray when users post or open endless threads about same thing .
some users hates me for this , i know it well , in my thread i always pointed out but somehow is unfair to maintain same topic on more threads .
that`s a bad habit for new users and not only for the rule`s sake but this is the way should be in a human community .
-=-=-
i was thinking as well to open a thread as yours but due to lack of time i didn`t. as soon as i`ll find interesting things i`ll let you know .
i myself am a NOOB !
---------- Post added at 11:28 AM ---------- Previous post was at 11:24 AM ----------
Glebun said:
I think this thread deserves to be in General, since you're not asking anything. Hit "report" and see what a mod thinks about it
Click to expand...
Click to collapse
... and i must agree with you this time ...
Thanks guys.
@xanthrax, i know the feeling, kind off busy family
But i like your comments, just straight forward, the way i like it.
Glebun said:
I think this thread deserves to be in General, since you're not asking anything. Hit "report" and see what a mod thinks about it
Click to expand...
Click to collapse
I think it should stay here as it "Helps" other users. General is more for discussions IMO.
But how about these?
http://forum.xda-developers.com/showthread.php?t=1749214
http://forum.xda-developers.com/showthread.php?t=1827635
http://forum.xda-developers.com/showthread.php?t=1732722
http://forum.xda-developers.com/showthread.php?t=1895737
http://forum.xda-developers.com/showthread.php?t=1946481
http://forum.xda-developers.com/showthread.php?t=2041679
and that's just the first page. all of the above are for "help"

[Q] Razr Doesn't Recognize Internal Storage Running Liquid Smooth

Obviously, I'm new to this site, as I imagine most are when they have their first big issue.
Right off the bat, I want to admit that this is solely my fault, and I have been trying to fix it for the past day... To make matters worse, the phone was a gift from my wife for our anniversary, so, I feel pretty bad about it...
The situation:
I rooted my phone yesterday with RazrBlade. I had to do a factory reset to get it to stick, but that was fine. I then installed Boot Menu Manager. I set up the necessary partitions, system_3 system.img (300mb), cache.img (300mb), and data.img (2Gb). I realize I probably should have given system more room... but I didn't think that was app related. I then flashed Liquid-JB-v2.8-OFFICIAL-spyder and gapps-jb-20130301-signed from goo.im. It didn't tell me the system partition was out of memory, so I assumed (like a fool) that everything was OK...
After a few reboots to the wrong system, namely the stock system, I decided to go into BMM and change the default to system_3, and then I did the dumbest thing possible: I thought to myself, "Wow, it would be a pain to see this bootloader each time my phone reboots. I'll turn the delay to 0!" So... I did...
The Problem:
My phone now boots straight past the recovery to system_3, which seems to have no space allocated for applications at all, including system ones. I attached a picture of the storage details. It goes through the setup process each time I reboot, and wipes any changes I make. I can't download apps, and I can't install them via APK because the phone thinks there is no space left. I don't have BMM installed in this system so I can't turn the delay up, to my knowledge. There is no file explorer on this system, so I can't go into the app files directly. I have tried connecting with "Android Commander" but it doesn't want to detect my device. I installed the ADT bundle for windows to get the usb driver, but still nothing... I also tried a factory reset again, but that does the same thing as rebooting for me now.
The Challange:
To my knowledge, I'm out of options, but I know most of you guys do this to see what you are capable of. I'm sure you've dealt with bigger issues. Can anyone help? Would Verizon techs be smart enough/have the right software to actually reset the phone?
Thanks!
RustyRazr said:
Obviously, I'm new to this site, as I imagine most are when they have their first big issue.
Right off the bat, I want to admit that this is solely my fault, and I have been trying to fix it for the past day... To make matters worse, the phone was a gift from my wife for our anniversary, so, I feel pretty bad about it...
The situation:
I rooted my phone yesterday with RazrBlade. I had to do a factory reset to get it to stick, but that was fine. I then installed Boot Menu Manager. I set up the necessary partitions, system_3 system.img (300mb), cache.img (300mb), and data.img (2Gb). I realize I probably should have given system more room... but I didn't think that was app related. I then flashed Liquid-JB-v2.8-OFFICIAL-spyder and gapps-jb-20130301-signed from goo.im. It didn't tell me the system partition was out of memory, so I assumed (like a fool) that everything was OK...
After a few reboots to the wrong system, namely the stock system, I decided to go into BMM and change the default to system_3, and then I did the dumbest thing possible: I thought to myself, "Wow, it would be a pain to see this bootloader each time my phone reboots. I'll turn the delay to 0!" So... I did...
The Problem:
My phone now boots straight past the recovery to system_3, which seems to have no space allocated for applications at all, including system ones. I attached a picture of the storage details. It goes through the setup process each time I reboot, and wipes any changes I make. I can't download apps, and I can't install them via APK because the phone thinks there is no space left. I don't have BMM installed in this system so I can't turn the delay up, to my knowledge. There is no file explorer on this system, so I can't go into the app files directly. I have tried connecting with "Android Commander" but it doesn't want to detect my device. I installed the ADT bundle for windows to get the usb driver, but still nothing... I also tried a factory reset again, but that does the same thing as rebooting for me now.
The Challange:
To my knowledge, I'm out of options, but I know most of you guys do this to see what you are capable of. I'm sure you've dealt with bigger issues. Can anyone help? Would Verizon techs be smart enough/have the right software to actually reset the phone?
Thanks!
Click to expand...
Click to collapse
I like to see you getting out of that one anyway,have you tried switching default storage? I mean try that I think that way the phone "thinks" your external sd is your internal memory and vice versa that might give you a chance to install BMM or a root explorer and debloat system..you got nothing to loose give it a try man,go to settings/advance and switch default storage,good luck.
Sent from my XT910 using xda premium
FIXED!
AztekSoul said:
go to settings/advance and switch default storage,good luck.
Click to expand...
Click to collapse
Unfortunately, I tried that. The problem was that it requires a reboot, which wiped any settings
HOWEVER, the fix was along that line, it just required me to go into android shell and tell it manually.
I followed these steps to make the phone install to the SD card (internal phone app partition really) by default (because I'm a newb, I can't post links, so just google "how-to-install-android-apps-to-the-sd-card-by-default-move-almost-any-app-to-the-sd-card").
After doing so, I still had a problem downloading BMM from the market, but I think that was due to the market being outdated and troublesome, so I had to find an apk version instead.
I installed it, and restored the boot delay to 30 secs.
I then immediately booted to system_1 to feel safe.
I may try loading the Liquid Smooth rom again once I've fixed the partitions, but I will NEVER turn BMM's boot delay to 0 s EVER again...

Categories

Resources