update to 6.1.a.2.45 problems - Sony Xperia P, U, Sola, Go

hey people i have a problem with the 6.1.a.2.45 update which is once i flash the firmware ce ftf all is fine until i re flash the advance stock kernel.
then OTA keeps telling me to update again??? my bootloader is unlocked and ive even tried the prerooted 6.1.a.2.45 kernel, any advice???

icy05 said:
hey people i have a problem with the 6.1.a.2.45 update which is once i flash the firmware ce ftf all is fine until i re flash the advance stock kernel.
then OTA keeps telling me to update again??? my bootloader is unlocked and ive even tried the prerooted 6.1.a.2.45 kernel, any advice???
Click to expand...
Click to collapse
Ignore the update notification.

Or if it's only root your after, you can now just flash the stock kernel back and retain root
Sent from my LT26i using Tapatalk 2

K900 said:
Ignore the update notification.
Click to expand...
Click to collapse
now why didnt i think of that , surly has to be away around it?? im from aus so maybe im flashing the wrong region firmware??

icy05 said:
now why didnt i think of that , surly has to be away around it?? im from aus so maybe im flashing the wrong region firmware??
Click to expand...
Click to collapse
Freeze or remove Update center.

del1701 said:
Or if it's only root your after, you can now just flash the stock kernel back and retain root
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
then id lose my cwm recovery wouldnt i??

K900 said:
Freeze or remove Update center.
Click to expand...
Click to collapse
dont know how to freeze but i removed UC problem solved, thanks

Related

Flashed kernel. Unable to get in to phone anymore. need help!

Hi after i flashed the ddr kernel from here http://forum.xda-developers.com/showthread.php?t=1956283 to my xperia mini i am unable to go into my phone anymore. the DDR logo shows up and then the screen goes black while the touch keys are lit up. I have also tried flashing a custom rom after the kernel problem by going into the cwm recovery but it stys the same no matter what. Please help me guys. really need your help. maybe the problem is not big for you but i am new to this android thing. any help would be highly appreciated.
Sorry but u are on the wrong section, questions should be posted at General, but i think that DDS Kernel are only for mini pro right? try to flash the FXP cm10 kernel, this will help you
jamy_hallian said:
Hi after i flashed the ddr kernel from here http://forum.xda-developers.com/showthread.php?t=1956283 to my xperia mini i am unable to go into my phone anymore. the DDR logo shows up and then the screen goes black while the touch keys are lit up. I have also tried flashing a custom rom after the kernel problem by going into the cwm recovery but it stys the same no matter what. Please help me guys. really need your help. maybe the problem is not big for you but i am new to this android thing. any help would be highly appreciated.
Click to expand...
Click to collapse
First, wrong section.
Secondly, flash stock firmware and then flash another kernel
Thank you guys. Solved the problem by flashing rage kernel. Sorry for posting in wrong section. It was not intentional.
jamy_hallian said:
Thank you guys. Solved the problem by flashing rage kernel. Sorry for posting in wrong section. It was not intentional.
Click to expand...
Click to collapse
The mistake you did was you flashed jellybean kernel for ics Rom
Sent from my SK17i
tanny90 said:
The mistake you did was you flashed jellybean kernel for ics Rom
Sent from my SK17i
Click to expand...
Click to collapse
i am now back to stock ROM 4.1.B.0.587. because i didnt really like any of the custom roms. i guess i am a stock rom guy
can i flash the rage kernel using flashtool. will it bring any improvements to the phone?
jamy_hallian said:
i am now back to stock ROM 4.1.B.0.587. because i didnt really like any of the custom roms. i guess i am a stock rom guy
can i flash the rage kernel using flashtool. will it bring any improvements to the phone?
Click to expand...
Click to collapse
Your rom will be pre-rooted and you will have a permanent recovery. Also you can overclock your phone.
andogeek10 said:
Your rom will be pre-rooted and you will have a permanent recovery. Also you can overclock your phone.
Click to expand...
Click to collapse
so you are saying i CAN flash the rage kernel (or any ics kernel?) to my phone now?
jamy_hallian said:
so you are saying i CAN flash the rage kernel (or any ics kernel?) to my phone now?
Click to expand...
Click to collapse
If you have an unlocked bootloader you can flash any kernel you want.
Sent from a mango
andogeek10 said:
If you have an unlocked bootloader you can flash any kernel you want.
Sent from a mango
Click to expand...
Click to collapse
how do i check whether my bootloader is locked or unlocked? i mean where is its status located?
jamy_hallian said:
how do i check whether my bootloader is locked or unlocked? i mean where is its status located?
Click to expand...
Click to collapse
If you were able to flash the rage kernel and DDS kernel then that means that you have an unlocked kernel. Also if you are able to boot into fastboot then you have an unlocked bootloader.
Sent from a mango
jamy_hallian said:
how do i check whether my bootloader is locked or unlocked? i mean where is its status located?
Click to expand...
Click to collapse
If you said that you solved your problem flashing Rage Kernel, then your bootloader is unlocked. Cause locked bootloaders cannot flash kernels
thank you andogeek10 & pastillero
jamy_hallian said:
thank you andogeek10 & pastillero
Click to expand...
Click to collapse
You are welcome
Sent from a mango
jamy_hallian said:
how do i check whether my bootloader is locked or unlocked? i mean where is its status located?
Click to expand...
Click to collapse
On stock rom type *#*#7378423#*#* -> Service Info -> Configuration -> Rooting Status: Bootloader unlocked: yes
Or you connect it in fastboot mode to flashtool, it should say Bootloader Status: Rooted (or simliar) :good:
jamy_hallian said:
i am now back to stock ROM 4.1.B.0.587. because i didnt really like any of the custom roms. i guess i am a stock rom guy
can i flash the rage kernel using flashtool. will it bring any improvements to the phone?
Click to expand...
Click to collapse
Where did you get the stock rom .587? I am using Cyanogenmod 10 but still need it incase of a backup plan... And if you have it please post me the stock kernel which came with .587 too... thanks.
icarious said:
Where did you get the stock rom .587? I am using Cyanogenmod 10 but still need it incase of a backup plan... And if you have it please post me the stock kernel which came with .587 too... thanks.
Click to expand...
Click to collapse
http://naw32fsystem.blogspot.com/2012/09/all-xperia-2011-official-stock-firmware.html
you can find it here
saqib nazm said:
http://naw32fsystem.blogspot.com/2012/09/all-xperia-2011-official-stock-firmware.html
you can find it here
Click to expand...
Click to collapse
thanks for that mate.. it includes the stock kernel in the image too?
icarious said:
Where did you get the stock rom .587? I am using Cyanogenmod 10 but still need it incase of a backup plan... And if you have it please post me the stock kernel which came with .587 too... thanks.
Click to expand...
Click to collapse
I got it from here http://www.4shared.com/rar/29kaVZ1E/Xperia_Mini_ST15i_41B0587.html
And just for the record, when I go into the update centre app on my phone it still asks me to update to 4.1.B.0.587 with 0.1 mb of update download. I dont know why this is so. but in the about phone section the software version is 4.1.B.0.587. but it still asks to update to 4.1.B.0.587.
jamy_hallian said:
I got it from here http://www.4shared.com/rar/29kaVZ1E/Xperia_Mini_ST15i_41B0587.html
And just for the record, when I go into the update centre app on my phone it still asks me to update to 4.1.B.0.587 with 0.1 mb of update download. I dont know why this is so. but in the about phone section the software version is 4.1.B.0.587. but it still asks to update to 4.1.B.0.587.
Click to expand...
Click to collapse
its pretty obvious.. when you flash the stock rom manually, some of the stuffs are not in order as the factory one even if the version is same.. so to put it in order perfectly you have to install the update...
---------- Post added at 09:14 PM ---------- Previous post was at 09:13 PM ----------
by the way.. what tool did you use to flash the stock rom ?? flashtool ??

[Q] Is there a way to root Sony Xperia U latest android (6.1.1.B.1.54)

Well i have tried flasttool, Binary's solutin and neither of them have worked. Have anybody even rooted 6.1.1.B.1.54 or the only solution is to roll back?
johhu12 said:
Well i have tried flasttool, Binary's solutin and neither of them have worked. Have anybody even rooted 6.1.1.B.1.54 or the only solution is to roll back?
Click to expand...
Click to collapse
Yes, first flash with flashtool B10 Kernel, then root with Binary's method, then flash B54 kernel, and you're done
Remember, only flash the kernels with flashtool, so u wont lose any data, nothing else
Regards
Thanks mate, it worked.
How did you get it to work? Wasn't the screen unreadable?
Sent from my Jellybean Xperia S
Ben36 said:
How did you get it to work? Wasn't the screen unreadable?
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
If you have a unlocked bl just flash my autoroot kernel
Ben36 said:
How did you get it to work? Wasn't the screen unreadable?
Click to expand...
Click to collapse

Bricked! ...help... :(

Hello to everynoe. Neo v user, rooted but bricked phone... Had stock ics kernel rooted with f/w .587. Flashed UHD but changed mind and wanted to downgrade to gb, .62... The mistake? I flashed immediately the f/w, the ftf file... Of course it stuck at the file "system.[i can't remember]" for too long. After that flashed kernel .562 and tried to flash the same f/w but nothing. Now i downloaded .587 ftf, full... What should i do??? My phone stucks at sony logo...
I know i messed it up but,
help... (Desperate)
Can your phone enter flashmode or fsstboot?
venoma333 said:
Can your phone enter flashmode or fsstboot?
Click to expand...
Click to collapse
If you mean connect it to flashtools and be recognized, yes. As try to flash ftf through flashmode.
Well why don't you just flash a stock ftf?
georgiougio said:
If you mean connect it to flashtools and be recognized, yes. As try to flash ftf through flashmode.
Click to expand...
Click to collapse
well if flashtool recognises your device..then just flash the .587ftf using flashtool.. :good:
Edit: Sorry bout the similar reply..was typin when venoma replied
venoma333 said:
Well why don't you just flash a stock ftf?
Click to expand...
Click to collapse
LoneWanderer said:
well if flashtool recognises your device..then just flash the .587ftf using flashtool.. :good:
Edit: Sorry bout the similar reply..was typin when venoma replied
Click to expand...
Click to collapse
I tried to flash ftf stock but it stucks flashing system.sin... Now i m waiting 14min to flash it.... Same percentage... Should i be more patient??
Is your phone's bootloader unlocked?
venoma333 said:
Is your phone's bootloader unlocked?
Click to expand...
Click to collapse
No.
Then try repairing with SEUS.
Use Google to find it.
venoma333 said:
Then try repairing with SEUS.
Use Google to find it.
Click to expand...
Click to collapse
Well, i tried it too but it tells me "You have the latest version"... I ll try again. Does this program has more functions??? Isn't it just for repairing?
The tool is mainly for updating, but sometimes solves issues like yours.
And which version does it say you have?
Oh and can you use adb?
venoma333 said:
The tool is mainly for updating, but sometimes solves issues like yours.
And which version does it say you have?
Oh and can you use adb?
Click to expand...
Click to collapse
The strange is that it doesn't say any version, just phone model, and "You have the latest version"... I try to flash now gb ftf .62 and i will wait how long it takes... Even 45'! Patience. Nothing else i can do!
Yeah well try that for as long as it takes, I can't think of anything that would solve your issue right now
I upload 2 pic to see how s the situation and give some help... When i open it these 2 appear. Forst the logo. Then the other and closes by its own...
What can i do?????
Try flashing just the stock Kernel of your phone version..
Had the same problem three weeks ago, can't flash system.sin . As far as I know, there's no solution for you. Fortunately, I took the phone to a repair centre and my phone was fixed under warranty (bricked while updating with SUS).
TodorSRB said:
Try flashing just the stock Kernel of your phone version..
Click to expand...
Click to collapse
Yes Todor, this is what i ve done many times in the past and what i tried yesterday and i m going to do it now too. It's just that for some reason yesterday it didn't flash system.sin FOR NOTHING after 25'! I ve unistalled flashtools now, cleaned up reg, and i ll set it up again as i ll update my java.
1 quest: is there ANY possibility that flashtools won't work with a well set up system and software???
Ok. Finally flashed succesfully! Just needed other computer because the one i used was TOOOOOO slow... :laugh: :laugh: :laugh: :laugh: :laugh:
This flashtool issue is becoming more and more common... The best thing to do when flashtool fails is to try in another y computer...
Sent from my Xperia Neo V using xda app-developers app
i think my phone is bricked
unlocked bootloader , still trying to root , no cwm or any recovery . flashed a kernel using flashtool . after that , it just restart at sony logo . is it hopeless or can be saved ?

reroot xperia go

i rooted my xperia go using bin4ry and after i updated my phone the root was gone, i tried rooting again with bin4ry and it didnt work.
how can i reroot my phone?
ad1ad2 said:
i rooted my xperia go using bin4ry and after i updated my phone the root was gone, i tried rooting again with bin4ry and it didnt work.
how can i reroot my phone?
Click to expand...
Click to collapse
Build that you're running on ?
6.1.1.b.1.54
ad1ad2 said:
6.1.1.b.1.54
Click to expand...
Click to collapse
It won't root using binary method.....
There is another method in the deb section which uses kernel files flash to get root.....
Sent from my Xperia Sola using xda app-developers app
can you give my a guide?
ad1ad2 said:
can you give my a guide?
Click to expand...
Click to collapse
Flash 6.1.1.B.1.10 Kernel only
Root using root with restore by Bin4ry
Flash 6.1.1.B.1.54 kernel only
You're done
I Searched for tutorial but didn't find any
Auto Root
I think you should find and flash a kernel with auto root in it's features.
This can help: http://forum.xda-developers.com/showthread.php?t=1829729
vuluke said:
I think you should find and flash a kernel with auto root in it's features.
This can help: http://forum.xda-developers.com/showthread.php?t=1829729
Click to expand...
Click to collapse
That would require an unlocked bootloader, oops :fingers-crossed:
Nabeel. said:
That would require an unlocked bootloader, oops :fingers-crossed:
Click to expand...
Click to collapse
Yes, of course, guys! However, I think everything is more easy after you unlocked bootloader
vuluke said:
Yes, of course, guys! However, I think everything is more easy after you unlocked bootloader
Click to expand...
Click to collapse
no offences but plz check before posting..... the guys wants to root .54 ICS FW which the latest and the link which you provided is not for ICS.......
so what should i do?
ad1ad2 said:
so what should i do?
Click to expand...
Click to collapse
Didn't you read my reply above friend ?
Check it, that's the only procedure on locked bootloader
You know how to flash only kernels outta a firmware ?
If not then check the screenshot attached. Mark the same in flashtool
You can get the 6.1.1.B.1.10 firmware from here talk.sonymobile.com/thread/35239
And .54 you already have
Nabeel. said:
Didn't you read my reply above friend ?
Check it, that's the only procedure on locked bootloader
You know how to flash only kernels outta a firmware ?
If not then check the screenshot attached. Mark the same in flashtool
You can get the 6.1.1.B.1.10 firmware from here talk.sonymobile.com/thread/35239
And .54 you already have
Click to expand...
Click to collapse
atfer i flash this firmware i can root the same way i rotted before?
ad1ad2 said:
atfer i flash this firmware i can root the same way i rotted before?
Click to expand...
Click to collapse
Yes, but do not flash the whole firmware.
Just flash the kernel, I uploaded an attachment in my reply above that tells you how to flash kernel only.
So fash .10 kernel
root using bin4ry
flash .54 kernel
easy
where can i find the .54 firmware?
ad1ad2 said:
where can i find the .54 firmware?
Click to expand...
Click to collapse
In this thread, you'll find many links
http://forum.xda-developers.com/showthread.php?t=2021474

[WARNING] New 4.3 Update locks you to 4.3

Well today i found out after getting tired of this trying to root 4.3 i decided to use a custom rom again.
Guess what happend...
No custom rom works anymore as imei magically dissapears. It only returns if you ... guess what...
Use Sony 4.3.
Well thank you very much Sony assholes for updating s1boot and making it irreversibel.
Luckily it seem that it might be able to get fixed with new proprietary blobs but that will maybe take some time for some dev's to add on their builds.
Downgrade Via Flashtool
Reb0rn said:
Well today i found out after getting tired of this trying to root 4.3 i decided to use a custom rom again.
Guess what happend...
No custom rom works anymore as imei magically dissapears. It only returns if you ... guess what...
Use Sony 4.3.
Well thank you very much Sony assholes for updating s1boot and making it irreversibel.
Luckily it seem that it might be able to get fixed with new proprietary blobs but that will maybe take some time for some dev's to add on their builds.
Click to expand...
Click to collapse
Are you trying to downgrade with Flashtool?, cause in Xperia Z1 is the same, the IMEI goes to 00000 but when you downgrade to 4.2.2 exclude the baseband and everything is ok and then you can flash your custom rom.......
cgomezparra said:
Are you trying to downgrade with Flashtool?, cause in Xperia Z1 is the same, the IMEI goes to 00000 but when you downgrade to 4.2.2 exclude the baseband and everything is ok and then you can flash your custom rom.......
Click to expand...
Click to collapse
i could kiss yo dawg
Thanks!!!
cgomezparra said:
Are you trying to downgrade with Flashtool?, cause in Xperia Z1 is the same, the IMEI goes to 00000 but when you downgrade to 4.2.2 exclude the baseband and everything is ok and then you can flash your custom rom.......
Click to expand...
Click to collapse
Oh god thanks :good:
i had this experience: i have the 6802, and i was on the stock 4.3 update, flashed the adv. stock kernel to get recovery, and restored a CM10.2 nandroid. when it booted up i had no radio signal, so i restored everything from a .257 FTF except system and kernel, and after that everything was fine. i don't know if this was 'correct', but it worked. i didn't check to see if i lost IMEI, but i definitely have it after doing those steps.
Reb0rn said:
i could kiss yo dawg
Thanks!!!
Click to expand...
Click to collapse
you might mark the OP as SOLVED and list the solution
I simply did a nandroid restore with the CWM recovery from the CM 10.2 boot.img - all up and running, IMEI still there.
lmemma16 said:
i had this experience: i have the 6802, and i was on the stock 4.3 update, flashed the adv. stock kernel to get recovery, and restored a CM10.2 nandroid. when it booted up i had no radio signal, so i restored everything from a .257 FTF except system and kernel, and after that everything was fine. i don't know if this was 'correct', but it worked. i didn't check to see if i lost IMEI, but i definitely have it after doing those steps.
Click to expand...
Click to collapse
Yes, flashing .257 FTF fixed it for me too (C6802). I flashed everything.
ChillyChan said:
Yes, flashing .257 FTF fixed it for me too (C8602). I flashed everything.
Click to expand...
Click to collapse
ah hey, cool. yeah, i would'a flashed everything but i wanted to stay on CM10.2. so i just made sure the other firmware was downgraded.
but again, it seems possible that there cold be other differences between the 6802 and the others? i dunno, but some people seem to be saying to use the baseband from .290 even if you downgrade back to .257?
lmemma16 said:
ah hey, cool. yeah, i would'a flashed everything but i wanted to stay on CM10.2. so i just made sure the other firmware was downgraded.
but again, it seems possible that there cold be other differences between the 6802 and the others? i dunno, but some people seem to be saying to use the baseband from .290 even if you downgrade back to .257?
Click to expand...
Click to collapse
In my case, I wanted to go back to stock. That's why I flashed everything About the baseband, I don't know cause I didn't note down the version before I flashed .290 so I have nothing to compare to. The one major difference of C6802 from other models is that we can flash ROMs without needing fastboot 'cause kernels are somehow allowed to be flashed from recovery.
please edit the original post title to reflect there's no problem
thanks
so im on 4.3 unrooted
was planning on flashing omni 4.4 .. i need to flash 4.2 (without the baseband) root it and then install omni? kinda confused! lol
androidindian said:
so im on 4.3 unrooted
was planning on flashing omni 4.4 .. i need to flash 4.2 (without the baseband) root it and then install omni? kinda confused! lol
Click to expand...
Click to collapse
Ya thts right.Plus you have to unlock the bootloader too if u havnt yet.
Hrm... You know, for the life of me, every time I flash from the 4.3 update with Flash Tool, I still lose my IMIE data and thus can't use the mobile connection.
Shadow of Chaos said:
Hrm... You know, for the life of me, every time I flash from the 4.3 update with Flash Tool, I still lose my IMIE data and thus can't use the mobile connection.
Click to expand...
Click to collapse
u and me both... if i jump to a older FTF i get imei 000000000
But if i jump to the newest before 4.3 i get imei 0
and excluding baseband didnt work... so no its not solved.
Reb0rn said:
u and me both... if i jump to a older FTF i get imei 000000000
But if i jump to the newest before 4.3 i get imei 0
and excluding baseband didnt work... so no its not solved.
Click to expand...
Click to collapse
I went from 290 to 532 without baseband and lost IMIE.
Flashed 290 WITH baseband and now have imei back. :good:
kable said:
I went from 290 to 532 without baseband and lost IMIE.
Flashed 290 WITH baseband and now have imei back. :good:
Click to expand...
Click to collapse
Same here but it's not good as I can't flash custom roms...
Sent from my C6833 using Tapatalk 4
Reb0rn said:
Same here but it's not good as I can't flash custom roms...
Sent from my C6833 using Tapatalk 4
Click to expand...
Click to collapse
what about fastboot boot an image to get into recovery to do a nandroid, that should retain your imei
velvetmxo said:
what about fastboot boot an image to get into recovery to do a nandroid, that should retain your imei
Click to expand...
Click to collapse
Don't have a nandroid.
Sent from my C6833 using Tapatalk 4
Reb0rn said:
Don't have a nandroid.
Sent from my C6833 using Tapatalk 4
Click to expand...
Click to collapse
oh man

Categories

Resources