hi.When I am installing clockworkmod (any version) bluetooth is disabled and not working , what is problem ?
hack_boter said:
hi.When I am installing clockworkmod (any version) bluetooth is disabled and not working , what is problem ?
Click to expand...
Click to collapse
please provide your full Rom and kernel details
baseband:I9100GXXLPV
build number :IMM76D.XXLPY
kernel: 3.0.8.TH
hack_boter said:
baseband:I9100GXXLPV
build number :IMM76D.XXLPY
kernel: 3.0.8.TH
Click to expand...
Click to collapse
ok.
Your kernel info is not complete.
Do you have root access?
What clockworkmod were you trying to install? please provide link to it
3.0.8-th [email protected] #1 smp preet mon jun 11 19:40:06 cest 2012
yes i root my phone because i think bluetooth fixed but not fixed.when i factory reset my phone bluetooth working but when i install CWM bluetooth not working.sorry for my bad english
cwm:ICS - 5.5.0.4
http://forum.xda-developers.com/showthread.php?t=1631934
hack_boter said:
3.0.8-th [email protected] #1 smp preet mon jun 11 19:40:06 cest 2012
yes i root my phone because i think bluetooth fixed but not fixed.when i factory reset my phone bluetooth working but when i install CWM bluetooth not working.sorry for my bad english
cwm:ICS - 5.5.0.4
http://forum.xda-developers.com/showthread.php?t=1631934
Click to expand...
Click to collapse
I'm not so familiar with i9100G kernels, so you can correct me if i'm wrong
Codeworks kernel is a custom kernel right?
Is CWM recovery not bundled already with the kernel?
yes is a custom kernel.
im using cmw now.
hack_boter said:
yes is a custom kernel.
im using cmw now.
Click to expand...
Click to collapse
Does the kernel come with CWM recovery by default?
if your answer is yes, then why are you trying to flash another cwm recovery?
no kernel not coming with CWM recovery by default.i install manualy.
yes im tryed another cwm recovery bot not fixed.
can you Introduction another 4.0.4 for i9100G for my ?
hack_boter said:
no kernel not coming with CWM recovery by default.i install manualy.
yes im tryed another cwm recovery bot not fixed.
can you Introduction another 4.0.4 for i9100G for my ?
Click to expand...
Click to collapse
I'm sorry, I cannot because my understanding about your phone is very little.
is there any other good kernel for your phone? try to change your kernel
ok , thanks for your answer .
Related
Hey,
I've successfully rooted my SII and installed ROM Manager, but as I try to flash CWM Recovery and select GT-I9100 the install doesn't commence and I'm left with a message saying 'An error occurred while downloading your recovery'. Any solutions to fix this or flash CWM in a different way so I can install CM9?
Thanks for any help
XCQT said:
Hey,
I've successfully rooted my SII and installed ROM Manager, but as I try to flash CWM Recovery and select GT-I9100 the install doesn't commence and I'm left with a message saying 'An error occurred while downloading your recovery'. Any solutions to fix this or flash CWM in a different way so I can install CM9?
Thanks for any help
Click to expand...
Click to collapse
first, Don't use ROM manager, it's not full compatible with our phone. You have been warned!
Second, please provide the following information:
-Your Rom / firmware details (dial *#1234#)
-What kernel are you using (check Settings>about)
-How did you ROOt your phone
Your problem is very easy to solve. however, your response is important
Jokesy said:
first, Don't use ROM manager, it's not full compatible with our phone. You have been warned!
Second, please provide the following information:
-Your Rom / firmware details (dial *#1234#)
-What kernel are you using (check Settings>about)
-How did you ROOt your phone
Your problem is very easy to solve. however, your response is important
Click to expand...
Click to collapse
I used S2 root to root my phone.
My kernel is I9100XWLP3 (3.0.15-I9100XWLP3-CL287862
[email protected] #3).
Dialling *#1234# brings up
"PDA : I9100XWLP7
PHONE : I9100XXLPS
CSC : I9100XEULP5
Build Info : Tue Apr 3 19:44:49 KST 2012
Also, if we manage to fix this, how should I go about installing CM9 (if ROM Manager isn't fully compatible)?
Thanks
XCQT said:
I used S2 root to root my phone.
My kernel is I9100XWLP3 (3.0.15-I9100XWLP3-CL287862
[email protected] #3).
Dialling *#1234# brings up
"PDA : I9100XWLP7
PHONE : I9100XXLPS
CSC : I9100XEULP5
Build Info : Tue Apr 3 19:44:49 KST 2012
Also, if we manage to fix this, how should I go about installing CM9 (if ROM Manager isn't fully compatible)?
Thanks
Click to expand...
Click to collapse
1. Visit here for CWM recovery, very simple!
2. Download and Flash Siyah kernel 4.1.1.
3. Visit CM9 thread and download ROM and Gapps.
4. follow the steps on CM9 thread about flashing the ROM
if you need any more help do let me know.
Jokesy said:
1. Visit here for CWM recovery, very simple!
2. Download and Flash Siyah kernel 4.1.1.
3. Visit CM9 thread and download ROM and Gapps.
4. follow the steps on CM9 thread about flashing the ROM
if you need any more help do let me know.
Click to expand...
Click to collapse
So I flash Siyah using Odin, run CWM, and then flash CM9+gapps?
Sent from my GT-I9100 using xda app-developers app
XCQT said:
So I flash Siyah using Odin, run CWM, and then flash CM9+gapps?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Once you've flashed the CWM recovery, then download the zip version of Siyah kernel and just flash in CWM recovery.
Very simple
Swyped from my Samsung Galaxy SII
Jokesy said:
Once you've flashed the CWM recovery, then download the zip version of Siyah kernel and just flash in CWM recovery.
Very simple
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Thank you so much. Got it up and running
CWM not getting installed
i flashed the siyah kernal v6 beta 4 which i guess is the lates but still in rom manager it show u have a cwm uupadte bt i am unable to it plz help because of this i am unable to update cynogenmod 10.1 in my cel.
Rom-Stock JB LSJ
kernal-siyah v6 bet 4
Jay_7 said:
i flashed the siyah kernal v6 beta 4 which i guess is the lates but still in rom manager it show u have a cwm uupadte bt i am unable to it plz help because of this i am unable to update cynogenmod 10.1 in my cel.
Rom-Stock JB LSJ
kernal-siyah v6 bet 4
Click to expand...
Click to collapse
Did you even bother reading the topic you replied to?
Rom Manager from market is not properley compatible with our devices, no matter what the manager says or if you see SGS2 in the list. Uninstall it and only use the "CWM" app that is installed by kernel or reboot into recovery.
TheATHEiST said:
Did you even bother reading the topic you replied to?
Rom Manager from market is not properley compatible with our devices, no matter what the manager says or if you see SGS2 in the list. Uninstall it and only use the "CWM" app that is installed by kernel or reboot into recovery.
Click to expand...
Click to collapse
M sorry bt i got that so what can i do to install the latest CWM ???
Jay_7 said:
M sorry bt i got that so what can i do to install the latest CWM ???
Click to expand...
Click to collapse
It doesnt matter, you have no reason to have latest, they are just updates to support more devices.
Just flash custom kernel, like latest Siyah, the kernels contain CWM.
Jokesy said:
1. Visit here for CWM recovery, very simple!
2. Download and Flash Siyah kernel 4.1.1.
3. Visit CM9 thread and download ROM and Gapps.
4. follow the steps on CM9 thread about flashing the ROM
if you need any more help do let me know.
Click to expand...
Click to collapse
for step 1, we are installing a temp CWM for flashing kernel in step 2?
phone stuck in restarting when flashing cwm
i had a SHW m250k ics.i converted it into gti9100 ics ,then flash jellybean 4.1.2 XWLST and rooted it with CWM-SuperSU-v0.97 from external sd card. i tried to install CWM GT-I9100_ClockworkMod-Recovery_4.0.1.4 by flashing with odin 1.85 . i used a sites. after flashing that phone stuck at restarting with yellow triangle,while CWM is working in recovery mode .i tried to battery remove but nothing worked.then i tried to again root CWM-SuperSU-v0.97 from sd card....but it wont start........the download mode and recovery mode is working ..........what can i do now...........please help..........if i posted this in a wrong page ,sorry...................
Flash siyah v6.
Sent from the little guy
gastonw said:
Flash siyah v6.
Sent from the little guy
Click to expand...
Click to collapse
Is this for me?...sorry...I didn't catch you.......Can you please elaborate or any link for my phone model and download links
---------- Post added at 07:52 AM ---------- Previous post was at 07:12 AM ----------
sunyreza said:
i had a SHW m250k ics.i converted it into gti9100 ics ,then flash jellybean 4.1.2 XWLST and rooted it with CWM-SuperSU-v0.97 from external sd card. i tried to install CWM GT-I9100_ClockworkMod-Recovery_4.0.1.4 by flashing with odin 1.85 . i used a sites. after flashing that phone stuck at restarting with yellow triangle,while CWM is working in recovery mode .i tried to battery remove but nothing worked.then i tried to again root CWM-SuperSU-v0.97 from sd card....but it wont start........the download mode and recovery mode is working ..........what can i do now...........please help..........if i posted this in a wrong page ,sorry...................
Click to expand...
Click to collapse
can anybody help with details.........my phone is likely dead man.........
Yes it was meant for you, flash siyah v6 .tar version via Odin.
Sent from...this is not even my S2
after rooting my GS S2 GT-I9100 [xxlsj] leaked firmeware can i flash any cwm recovery.zip from the stock recovery : )
tissaoui said:
after rooting my GS S2 GT-I9100 [xxlsj] leaked firmeware can i flash any cwm recovery.zip from the stock recovery : )
Click to expand...
Click to collapse
I assume you are talking about PhilZ recovery........
If all you want is a custom recovery on a stock firmware then you have to match the recovery to the firmware build......
And you *do* realise that the leak/test firmware is not as stable as release firmwares don't you?
http://i.imgur.com/rVnFwJM.jpg
I have updated my rom and I put android 4.1.2 with I9100XXLS8
Version kernel 3.0.31 ([email protected]#k5-3 SMP PREEMP Tue Feb 26 18:28:26 SGT 2013)
Version number: JZ054K.I9100XWLSD
I have french and arabic no prblems
when I open CWM, i have message:
This version of CWM Manager should be used with Cf-Root v5.0 or newer
Can you tell me how to do to resolve this problem. This CMW manager doen't have (backup up and restore) juste flash kerecovery and download mode).
I tried to put Siyak Kernel v 6. bet, phone stays in samsung and doen't work. I stays with the logo of samsung.
What I have to do ? please
The phone works good, battery is better, but with this problem I can not do a backu up in case of.
Thanks a lot for your help.
best regards
If some one likes to have this rom, I can send it to you. I work's with vocal input in arabic with sms also.
Tried latest philz?
Sent from the little guy
gastonw said:
Tried latest philz?
Sent from the little guy
Click to expand...
Click to collapse
Hello,
No, I didn't try it.
I don't know how to find it, and I don't know how to put it? Do I have to flash kernel with odin?
Thanks
nutellamarco said:
Hello,
No, I didn't try it.
I don't know how to find it, and I don't know how to put it? Do I have to flash kernel with odin?
Thanks
Click to expand...
Click to collapse
Dwnld the latest philz kernel zip file from HERE .
Flash the same from ur exsisting recovery the usual way
or u can dwnld the tar version of that and flash it thro PC odin
Hello
Iam currently on my New installed ROM the V7 Glamorous of mr henrylife http://forum.xda-developers.com/galaxy-s3/development/rom-glamours4-n3-s3-touch-note-3-t2258723/page678.
The thing is my phones kernel version is:
3.0.31-2429075
[email protected] #1
Fri Apr 4 22:16:11 KST 2014
Can i just Run Philz (CWM and install zip - the download link is: http://forum.xda-developers.com/devdb/project/dl/?id=6522 and flash it straight?
Is it safe to FLASH KERNEL VIA CWM?
Ya that's the easy way to go..
Just flash and reboot
Press thanx if i helped you in anyway...
kunal1540 said:
Ya that's the easy way to go..
Just flash and reboot
Press thanx if i helped you in anyway...
Click to expand...
Click to collapse
Thanks! already pressed thanks!
Update:
After flashing, seems that nothing has changed on my Kernel @ my phones about.. is that normal?
Update:
Its OK now
Reflashed for the 2nd time. Seems that it didnt work the 1st time lol
Q&A for [CWM][Repo]ClockWorkMod Recovery - ||Kit-Kat 4.4 Compatible||
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
I just flashed your CWM 6.0.4.7 and now my phone wont boot . What can I do now ?
I just flashed your CWM 6.0.4.7 and now my phone wont boot . What can I do now ?
afelipe.carvalho said:
I just flashed your CWM 6.0.4.7 and now my phone wont boot . What can I do now ?
Click to expand...
Click to collapse
Hi, Is there any mode the device can boot into? Download mode? If the recovery flash went wrong you can still go into download mode. Do this by pressing (Vol Down + Home + Power ) all at the same time.
More information about the device would be great as well, ROM etc. :good::highfive:
Hardware MT6572 help for root
Hardware
MT6572
Cloudfone Excite 401dx
kitkat 4.4.2
Build date UTC
20141021-075342
Baseband version
MOLY.WR8.W1315.MD.WG.MP.V47,2014/06/28 21:20
KERNEL VERSION
3.4.67 ([email protected]) (gccversion 4.7 (GCC)) #1 SMP Tue Oct 21 15:4745 CST 2014
Sat oct 18 15:48:45 CST 2014
Build number Cloudfone_Excite_401dx_FS20141018_V05
pls help me how to root... i try iroot towelroot etc is not working pls help me..
5.1?
Will this cwm support Lollipop 5.1+ ?
can i use this recovery to install cm 12.1
I am presently on cm 9 running on galaxy s2 GT-9100
Harsh Gangwani said:
I am presently on cm 9 running on galaxy s2 GT-9100
Click to expand...
Click to collapse
Yes, just flash it via your recovery, then reboot back into recovery(not system). Then do your backups, wipes etc and follow the steps from OP
are you sure it's working? and is not a fake that mirror?
Would CWM Base Version 6.0.3.3 Work
Hi All,
I m having PhilZ Touch 5 Build Version 5.08.5 - i9100 CWM Base Version 6.0.3.3. with Stock ROM. Would this suffice to upgrade to Kitkat or Do I need to upgrade the CWM ?
Just a Noob, taking one step a time.
Thanks in advance
DEvice Info :
PDA : I9100XWLST
PHONE : I9100XXKH3 (Changed to this, from I9100DDLS9, after trying Overheating Fix)
CSC: I9100DDLSE
Build Info : Moday, April 22 16:44:57 KST 2013
Android Version : 4.1.2
[email protected] said:
Hi All,
I m having PhilZ Touch 5 Build Version 5.08.5 - i9100 CWM Base Version 6.0.3.3. with Stock ROM. Would this suffice to upgrade to Kitkat or Do I need to upgrade the CWM ?
Just a Noob, taking one step a time.
Thanks in advance
DEvice Info :
PDA : I9100XWLST
PHONE : I9100XXKH3 (Changed to this, from I9100DDLS9, after trying Overheating Fix)
CSC: I9100DDLSE
Build Info : Moday, April 22 16:44:57 KST 2013
Android Version : 4.1.2
Click to expand...
Click to collapse
Yes, you need to use a newer version. CWM 6.0.4.5+ will work for kitkat and above
noppy22 said:
Yes, you need to use a newer version. CWM 6.0.4.5+ will work for kitkat and above
Click to expand...
Click to collapse
Thanks Noppy22 you are my Saviour .
Where and how can I update that just a link to some thread. Though I have downloaded
CWM_6.0.4.7_I9100.zip
Simply flash it from recovery or any other way there?
[email protected] said:
Thanks Noppy22 you are my Saviour .
Where and how can I update that just a link to some thread. Though I have downloaded
CWM_6.0.4.7_I9100.zip
Simply flash it from recovery or any other way there?
Click to expand...
Click to collapse
Yes, just flash it in recovery and reboot back to the new recovery. Then flash the KitKat ROM and gapps(after wipes) and you're done
noppy22 said:
Yes, just flash it in recovery and reboot back to the new recovery. Then flash the KitKat ROM and gapps(after wipes) and you're done
Click to expand...
Click to collapse
Thanks Again. Will try and update here
Use kingroot and boom
??? It worked on my cloudfone excite 401 dx+
[email protected] said:
Thanks Again. Will try and update here
Click to expand...
Click to collapse
Dear Friends,
I did updated my CWM with CWM_6.0.4.7_I9100.zip. It installed properly. I restarted the phone and its now showing the SGS2 Logo and then black screen.
I can get into recovery. Need help to revive it again. Though I m searching for the threads and posts in the forum. but any direct reference would be handful. My handset details and history of rooting and CWM update are as below :
Rooted with PhilZ Touch 5 Build Version 5.08.5 - i9100 CWM Base Version 6.0.3.3. with Stock ROM. updated CWM, with CWM_6.0.4.7_I9100.zip, by installing Zip option using recovery .
Device Info :
PDA : I9100XWLST
PHONE : I9100XXKH3 (Changed to this, from I9100DDLS9, after trying Overheating Fix)
CSC: I9100DDLSE
Build Info : Moday, April 22 16:44:57 KST 2013
Android Version : 4.1.2
Thanks in advance to you all.
[email protected] said:
I did updated my CWM with CWM_6.0.4.7_I9100.zip. It installed properly. I restarted the phone and its now showing the SGS2 Logo and then black screen.
I can get into recovery. Need help to revive it again. Though I m searching for the threads and posts in the forum. but any direct reference would be handful. My handset details and history of rooting and CWM update are as below :
Rooted with PhilZ Touch 5 Build Version 5.08.5 - i9100 CWM Base Version 6.0.3.3. with Stock ROM. updated CWM, with CWM_6.0.4.7_I9100.zip, by installing Zip option using recovery .
Click to expand...
Click to collapse
The CWM 6.0.4.7 is only useful to you to directly upgrade to a kitkat rom. When you flashed the recovery it replaced your kernel. Only use the newer recovery if you want to flash a new rom. Otherwise it is of no use to you.
So you can either use CWM 6.0.4.7 to flash kitkat or just flash the philz kernel you used before. You might need to wipe cache and dalvik cache before you reboot(this won't wipe any data).
noppy22 said:
The CWM 6.0.4.7 is only useful to you to directly upgrade to a kitkat rom. When you flashed the recovery it replaced your kernel. Only use the newer recovery if you want to flash a new rom. Otherwise it is of no use to you.
So you can either use CWM 6.0.4.7 to flash kitkat or just flash the philz kernel you used before. You might need to wipe cache and dalvik cache before you reboot(this won't wipe any data).
Click to expand...
Click to collapse
Thanks again Noppy22. That really helped me understand the cause and I've revived it back to original.
This time took backup of everything, which I didn't even after reading in each and every OP to take backup first and then move on. Well then thats the way to learn
Thanks
hi guys i just got a Samsung Galaxy fame lite GT-S6790N , and i tried a lot of things but cannot root , install cwm or costum rom .
It has jelly bean 4.1.2 installed and it is laggy as hell it is very slow so thats why i want to change the rom , so please any suggestions links or tutorials ... i tried Root_with_Restore_by_Bin4ry_v33 and some other root methods but doesn't work idk what to do because can't find any other root , cwm , rom , tutorial
more info about my phone :
Samsung Galaxy fame lite GT-S6790N
current version : Jelly bean 4.1.2
Baseband version : S6790NXXAMJ1
kernel version : 3.0.15-1496475
[email protected]#1
Fri Dec 20 13:33:53 KST 2013
Build Number : JZO54K.S6790NXXAML2
THANK FOR ANY HELP
ltoptic said:
hi guys i just got a Samsung Galaxy fame lite GT-S6790N , and i tried a lot of things but cannot root , install cwm or costum rom .
It has jelly bean 4.1.2 installed and it is laggy as hell it is very slow so thats why i want to change the rom , so please any suggestions links or tutorials ... i tried Root_with_Restore_by_Bin4ry_v33 and some other root methods but doesn't work idk what to do because can't find any other root , cwm , rom , tutorial
more info about my phone :
Samsung Galaxy fame lite GT-S6790N
current version : Jelly bean 4.1.2
Baseband version : S6790NXXAMJ1
kernel version : 3.0.15-1496475
[email protected]#1
Fri Dec 20 13:33:53 KST 2013
Build Number : JZO54K.S6790NXXAML2
THANK FOR ANY HELP
Click to expand...
Click to collapse
Have you tried using towelroot yet?
shimp208 said:
Have you tried using towelroot yet?
Click to expand...
Click to collapse
yeah i have it says device not supported or something like that
ltoptic said:
yeah i have it says device not supported or something like that
Click to expand...
Click to collapse
Did you try changing the mod strings in towel root to fit your device?
shimp208 said:
Did you try changing the mod strings in towel root to fit your device?
Click to expand...
Click to collapse
no i didn't try and i don't know how to do it can you do it for me and tell me how to install it ?
ok i did that string after pressing make it rain phone restarted ? rootchecker shows that i am rooted but
i cannot install cwm or twrp ??
ltoptic said:
no i didn't try and i don't know how to do it can you do it for me and tell me how to install it ?
ok i did that string after pressing make it rain phone restarted ? rootchecker shows that i am rooted but
i cannot install cwm or twrp ??
Click to expand...
Click to collapse
Glad you could get rooted, is there a CWM or TWRP recovery image available for your device? If there isn't one available you may have to compile it yourself using this guide. What are you currently using to try and install recovery?
shimp208 said:
Glad you could get rooted, is there a CWM or TWRP recovery image available for your device? If there isn't one available you may have to compile it yourself using this guide. What are you currently using to try and install recovery?
Click to expand...
Click to collapse
My phone is very slow and laggy i thought you guys have any good fast stable rom for my phone . I don't have ubuntu and really this stuff isn't that easy lol but still if you could do this compile for me would be great . thanks for any help
ltoptic said:
My phone is very slow and laggy i thought you guys have any good fast stable rom for my phone . I don't have ubuntu and really this stuff isn't that easy lol but still if you could do this compile for me would be great . thanks for any help
Click to expand...
Click to collapse
For any ROMs you would need a custom recovery. Unfortunately as the winter is my busiest time at school, I won't have time to compile a recovery for you until at least the end of March. However if you send me your stock recovery.img and stock boot.img I will see if I have time earlier.
shimp208 said:
For any ROMs you would need a custom recovery. Unfortunately as the winter is my busiest time at school, I won't have time to compile a recovery for you until at least the end of March. However if you send me your stock recovery.img and stock boot.img I will see if I have time earlier.
Click to expand...
Click to collapse
ok tell me how to do that , do you need any backup or something from my phone or just the original stock img from my phone ?
ltoptic said:
ok tell me how to do that , do you need any backup or something from my phone or just the original stock img from my phone ?
Click to expand...
Click to collapse
I just need the original boot.img and stock recovery.img for your phone, you can use either terminal emulator or adb shell to dump those. Let me know if you need more detailed instructions.
shimp208 said:
I just need the original boot.img and stock recovery.img for your phone, you can use either terminal emulator or adb shell to dump those. Let me know if you need more detailed instructions.
Click to expand...
Click to collapse
i have the stock recovery , cuz i try to install every cmw or twrp and it brick my phone so i use odin to recover my recovery mode, this is the download link for my stock rom http://www.nextwap.net/down-firmware/7513/samsung-galaxy-fame-lite-gt--s6790n.html
just tell me how to make that dump