Can anyone help me please ?
If I try to flash any ROM (Tried to install paranoindandroid, Ressurection Rom, Slim Rom) I get stucked in endless bootloop. From time to time the phone boots ROM, but only thing that happens is that I see "Enter your PIN code" for like 1-2 secs and then phone restarts and bootloop continues. Fortunately, I have Nandroid backup of my previous ROM which is old like hell (It´s RebelAOKP 1.3 ROM) so I can download other ROMs from xda. I tried full wipe, flashing other kernels, flashing ROM several times, fixing permissions and I don´t know, everything what is in CWM.
I´m so frustrated, whole day I´m searching for solution but I can´t find anything helpfull so I hope that someone will help me. Please be good to me I´m little bit noob but flashed lot of ROMs and this happens to me for first time. I will appreciate every response.
THX for your help.
Robotr0n said:
Can anyone help me please ?
If I try to flash any ROM (Tried to install paranoindandroid, Ressurection Rom, Slim Rom) I get stucked in endless bootloop. From time to time the phone boots ROM, but only thing that happens is that I see "Enter your PIN code" for like 1-2 secs and then phone restarts and bootloop continues. Fortunately, I have Nandroid backup of my previous ROM which is old like hell (It´s RebelAOKP 1.3 ROM) so I can download other ROMs from xda. I tried full wipe, flashing other kernels, flashing ROM several times, fixing permissions and I don´t know, everything what is in CWM.
I´m so frustrated, whole day I´m searching for solution but I can´t find anything helpfull so I hope that someone will help me. Please be good to me I´m little bit noob but flashed lot of ROMs and this happens to me for first time. I will appreciate every response.
THX for your help.
Click to expand...
Click to collapse
A.
If i get your question very well,
1. Your device can only boot if you restore your old ROM.
2. Anytime you flash a new ROM, you always end up in bootloops
Please correct me if i got something wrong.
B.
Please provide answers to these questions:
1. What's your ROM details? Press include your phone's model no (goto SETTINGS -About, post everything you see)
2. Was your device carrier branded?
3. Was your device SIMlocked?
4. Please post all the steps you normally take while flashing a new ROM
Swyped from my Galaxy SII
Jokesy said:
A.
If i get your question very well,
1. Your device can only boot if you restore your old ROM.
2. Anytime you flash a new ROM, you always end up in bootloops
Please correct me if i got something wrong.
B.
Please provide answers to these questions:
1. What's your ROM details? Press include your phone's model no (goto SETTINGS -About, post everything you see)
2. Was your device carrier branded?
3. Was your device SIMlocked?
4. Please post all the steps you normally take while flashing a new ROM
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Alright Sir,
A
1. Correct
2. Correct
B
1. GT-I9100, 4.0.4, I9100XXLPX
Kernel:
3.0.32-FLUXI-XX.01-RC5.2+
[email protected])) 1SMP PREEMPT Sun May 27 14:22:38 CEST 2012
Build No.
IMM76I
Mod version
RebelAOKP-1.3-ICS20120531-SGS2
2. No
3. No
4. It depends on ROM which I want flash. I always follow all the steps on installation info, but generally I always do full wipe, wipe dalvik & cache, install ROM, optionally gapps, then again wipe cache & dalvik, fix permissions and then reboot.
Robotr0n said:
Alright Sir,
A
1. Correct
2. Correct
B
1. GT-I9100, 4.0.4, I9100XXLPX
Kernel:
3.0.32-FLUXI-XX.01-RC5.2+
[email protected])) 1SMP PREEMPT Sun May 27 14:22:38 CEST 2012
Build No.
IMM76I
Mod version
RebelAOKP-1.3-ICS20120531-SGS2
2. No
3. No
4. It depends on ROM which I want flash. I always follow all the steps on installation info, but generally I always do full wipe, wipe dalvik & cache, install ROM, optionally gapps, then again wipe cache & dalvik, fix permissions and then reboot.
Click to expand...
Click to collapse
Do you have any ROM you want to flash now? If yes, please tell me the name of the Rom so that i can provide you with my own flashing instruction
Swyped from my Galaxy SII
Jokesy said:
Do you have any ROM you want to flash now? If yes, please tell me the name of the Rom so that i can provide you with my own flashing instruction
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Yes, in my phone I have latest version of:
ParanoidAndroid 1.992,
Ressurection ROM V3.0.6
SlimBean Rom
(prefer ParanoidAndroid)
Robotr0n said:
Yes, in my phone I have latest version of:
ParanoidAndroid 1.992,
Ressurection ROM V3.0.6
SlimBean Rom
(prefer ParanoidAndroid)
Click to expand...
Click to collapse
Ok. I'm using paranoid too.
- boot to CWM recovery
- If you don't have a backup, please do it now
- wipe data/factory reset
- wipe dalvik cache
- flash paranoid ROM
- Reboot recovery (under Advanced)
- wipe data/factory reset
- format /system (under mount and storage)
- wipe dalvik cache
- flash ROM
- flash gapps (gapps 4.1)
- fix permissions
- reboot phone
All should be fine now.
Note: this is not a standard flashing method. I only tried as much as possible to remove possibility of another round of bootloops.
-
-
Swyped from my Galaxy SII
Jokesy said:
Ok. I'm using paranoid too.
- boot to CWM recovery
- If you don't have a backup, please do it now
- wipe data/factory reset
- wipe dalvik cache
- flash paranoid ROM
- Reboot recovery (under Advanced)
- wipe data/factory reset
- format /system (under mount and storage)
- wipe dalvik cache
- flash ROM
- flash gapps (gapps 4.1)
- fix permissions
- reboot phone
All should be fine now.
Note: this is not a standard flashing method. I only tried as much as possible to remove possibility of another round of bootloops.
-
-
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Thanks a lot but unfortunately, this did not help me. Stucked in bootloops again. :-/
if the above doesn't work try flashing stock from download mode - ODIN
Robotr0n said:
Can anyone help me please ?
If I try to flash any ROM (Tried to install paranoindandroid, Ressurection Rom, Slim Rom) I get stucked in endless bootloop. From time to time the phone boots ROM, but only thing that happens is that I see "Enter your PIN code" for like 1-2 secs and then phone restarts and bootloop continues. Fortunately, I have Nandroid backup of my previous ROM which is old like hell (It´s RebelAOKP 1.3 ROM) so I can download other ROMs from xda. I tried full wipe, flashing other kernels, flashing ROM several times, fixing permissions and I don´t know, everything what is in CWM.
I´m so frustrated, whole day I´m searching for solution but I can´t find anything helpfull so I hope that someone will help me. Please be good to me I´m little bit noob but flashed lot of ROMs and this happens to me for first time. I will appreciate every response.
THX for your help.
Click to expand...
Click to collapse
I don't know if this will help but yeah.
http://forum.xda-developers.com/showthread.php?t=1108499
Robotr0n said:
Thanks a lot but unfortunately, this did not help me. Stucked in bootloops again. :-/
Click to expand...
Click to collapse
Something must have gone wrong somewhere. This shouldn't happen, normally.
Restore your backup. Sorry about that.
Can you confirm if the MD5 sum of the zips corresponds with the ones provided by the Rom developers?
Swyped from my Galaxy SII
serialteg said:
if the above doesn't work try flashing stock from download mode - ODIN
Click to expand...
Click to collapse
Thanks. I´ll try that.
Lushstep said:
I don't know if this will help but yeah.
http://forum.xda-developers.com/showthread.php?t=1108499
Click to expand...
Click to collapse
Also thanks, I was afraid of this, everytime when I´m flashing via ODIN I have bad feelings.
Jokesy said:
Something must have gone wrong somewhere. This shouldn't happen, normally.
Restore your backup. Sorry about that.
Can you confirm if the MD5 sum of the zips corresponds with the ones provided by the Rom developers?
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Yes MD5 sums match and they are allright, I downloaded all of them today from official repositories. Also thanks for helping
I´m goind off to bed, long day full of flashing and bootlooping Thank you all guys. :good:
But guys, if I flash stock ROM via ODIN how this will help me ? I will be able to install newest ROMs properly ? It will remove my problem ? I´m so confused...
Robotr0n said:
But guys, if I flash stock ROM via ODIN how this will help me ? I will be able to install newest ROMs properly ? It will remove my problem ? I´m so confused...
Click to expand...
Click to collapse
Yeah. Going back to stock and starting afresh should solve this issue.
Download a 4.0.3 ICS firmware, to make things safer and faster
Swyped from my Galaxy SII
Jokesy said:
Yeah. Going back to stock and starting afresh should solve this issue.
Download a 4.0.3 ICS firmware, to make things safer and faster
Swyped from my Galaxy SII
Click to expand...
Click to collapse
OK, I´m going to try it now.
Robotr0n said:
OK, I´m going to try it now.
Click to expand...
Click to collapse
Perform a factory data reset in recovery before flashing via Odin
Swyped from my Galaxy SII
Jokesy said:
Perform a factory data reset in recovery before flashing via Odin
Swyped from my Galaxy SII
Click to expand...
Click to collapse
I flashed stock ROM XWLPE then CF Root, then i flashed ParaAndroid ROM and guess what ?
reboot
reboot
reboot
So then I formated everything: emmc, system, etc., again flashing stock rom, CF root (completely clear phone) flashed ROM again and its still bootlooping... I really dont know what to do.
Can you not provide a logcat?
Sent from my Galaxy S2 running JellyBean
Robotr0n said:
I flashed stock ROM XWLPE then CF Root, then i flashed ParaAndroid ROM and guess what ?
reboot
reboot
reboot
So then I formated everything: emmc, system, etc., again flashing stock rom, CF root (completely clear phone) flashed ROM again and its still bootlooping... I really dont know what to do.
Click to expand...
Click to collapse
i believe something is either wrong with the zip files you downloaded, or something else.
You shouldn't be facing all these
Swyped from my Galaxy SII
---------- Post added at 06:54 AM ---------- Previous post was at 06:27 AM ----------
Robotr0n said:
I flashed stock ROM XWLPE then CF Root, then i flashed ParaAndroid ROM and guess what ?
reboot
reboot
reboot
So then I formated everything: emmc, system, etc., again flashing stock rom, CF root (completely clear phone) flashed ROM again and its still bootlooping... I really dont know what to do.
Click to expand...
Click to collapse
Ok.
Any other time you face bootloops, Try this:
- flash Siyah kernel (4.x.x zip) via CWM recovery
-reboot phone
Swyped from my Galaxy SII
*boy*racer* said:
Can you not provide a logcat?
Sent from my Galaxy S2 running JellyBean
Click to expand...
Click to collapse
I don´t know how to get these logcats.
Jokesy said:
i believe something is either wrong with the zip files you downloaded, or something else.
You shouldn't be facing all these
Swyped from my Galaxy SII
---------- Post added at 06:54 AM ---------- Previous post was at 06:27 AM ----------
Ok.
Any other time you face bootloops, Try this:
- flash Siyah kernel (4.x.x zip) via CWM recovery
-reboot phone
Swyped from my Galaxy SII
Click to expand...
Click to collapse
You really think that all these files which I downloaded are damages ? Uhm I don´t know but I don´t think so.
I tried this with Siyah kernel once and nothing happend. But I´ll give it a try again.
EDIT:
OH, God. I tried different stock ROM and even the new stock ROM wont boot... after i restart mobile, I´m in factory mode :-/
How to do a logcat
Ok so this is what i do.
. Download attachment and extract anywhere
.Open up Platform-tools folder and hold Shift+right click on an empty space within the folder.
.Click on "Open command window here"
.In the command window, type "adb logcat"
.Plug in device & turn it on
.It should do a logcat
leave it for about 1 min then disconnect device. Right click the logcat and select mark then highlight all and right click again. go to pastebin.com or something like that then paste it and save and give us the link.
hope this helps
Related
So i managed to solve the problem that i had.
When i said that i could flash only the stock one, i was flashing XXKI3 as one file after each failed attempt to flash a custom one.
So i tried and flashed another stock rom, again as 1 file. after the flash was done the phone again stucked at first screen wit the triangle.
After that i thought that something was really messed up in the phone and flashed again XXKI3 with PIT and multiple files and offcourse RE-Partition.
After that flash a stock rom with 1 file and modified bootloader from Intratech's thread, this way you can also reset the binary caunter with a jig (can find many on ebay).
After finish flashing and first boot
root with CF kernel and flash any custom rom. It worked as it should. Now i am on a custom rom and trying to see which one suits me best.
Thank Jiganet for some may be needed modified bootloader which is recommended so you can reset binary counter.
Everyone tha nk you for your suggestions and help.
any rom that i install is not getting beyond the bootlogo. i had xxki3 stock with cf-root xxki3 kernel.
every install i make full wipe on everything before(data, cache, dalvik).
any body any idea?
only stock rom working.
The first boot takes some time. Are you waiting that long?
mariosraptor said:
any rom that i install is not getting beyond the bootlogo. i had xxki3 stock with cf-root xxki3 kernel.
every install i make full wipe on everything before(data, cache, dalvik).
any body any idea?
only stock rom working.
Click to expand...
Click to collapse
1. Enter Clockworkmod recovery
1a. Do a Backup (not a must, but i suggest) from the cwm recovery of your current rom/settings.
2. Wipe Data/Cache Factory reset
3. Flash the new rom you want
4. Again (not needed but well..) Wipe Data/Cache Factory Reset
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache (this is why you get bootloops)
7. Reboot to system
Wait 4-5 minutes and you will have your new, shiny working rom.
Hope it helps, cheers
yes. more than 10 minutes.
kanefox said:
The first boot takes some time. Are you waiting that long?
Click to expand...
Click to collapse
i am not getting any bootloops. it just gets stucked at the first screen with the triangle.
i have no experience in samsung but i have done all that you mention.
still no luck. i will try once more and let you know in about 20 minutes.
thanks for your help.
rembrandtlnx said:
1. Enter Clockworkmod recovery
1a. Do a Backup (not a must, but i suggest) from the cwm recovery of your current rom/settings.
2. Wipe Data/Cache Factory reset
3. Flash the new rom you want
4. Again (not needed but well..) Wipe Data/Cache Factory Reset
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache (this is why you get bootloops)
7. Reboot to system
Wait 4-5 minutes and you will have your new, shiny working rom.
Hope it helps, cheers
Click to expand...
Click to collapse
Mh strange, the strange is.. with the stock rom is working.
Looks like your phone dosnt like the rom you are flashing so the quesion now is:
Are you sure, you are flashing a rom your phone can read? I know the i9100G and the AT&T versions cant be flashed with the standard (i9100) S2 roms (there is a specific thread i think here on xda for those versions)
mine is an unbranded i9100 from Greece. i am flashing the correct roms.
rembrandtlnx said:
Mh strange, the strange is.. with the stock rom is working.
Looks like your phone dosnt like the rom you are flashing so the quesion now is:
Are you sure, you are flashing a rom your phone can read? I know the i9100G and the AT&T versions cant be flashed with the standard (i9100) S2 roms (there is a specific thread i think here on xda for those versions)
Click to expand...
Click to collapse
the same. more than 15 minutes of waiting time. flashing stock again.
Im sorry cant rly help you then, let's wait for some more experienced user answer
thanks. no worries. stock is good. matter of speaking
rembrandtlnx said:
Im sorry cant rly help you then, let's wait for some more experienced user answer
Click to expand...
Click to collapse
next time when u flash try formatting system.
In CWM >mounts and storage> format system
Please state detailed steps you did when flashing a ROM and what kind of ROM.. That will help alot on trouble shooting your problem.
Sent from my GT-I9100 using xda premium
every body read first post managed to solve this.
Hi was there a solution to this problem as I seem to get it with EVERY rom I try to install from zip?
Hi to all, this is my first Post and this is my First Android I come from an iPhone 2G, iPhone 3g, iPhone 3GS and my last phone was an iPhone 4!!! now I'm extremely happy with my new SGS2!!!
I have been searching a lot!!! for a solution for this flash loop issue,
1 - I have flash to a stock 2.3.5 KI3 samfirmware,
2- then I have Odin>PDA>cf-root-KI3-4.2.tar to root my phone.
3 - After that I downloaded 3 custom roms, DarkyROM2_KI3, VillainROM-3.0.0-signed and Cyanogen cm_galaxys2_full-112. put them on my root internal sdcard.
4 - booted to ClockworkMod Recovery menu.
5 - Wipe Data/Factory Reset
6 - Wipe Partition Cache.
7 - Install Zip from sdcard.
and every thing seems ok, but when i restart, it stays on the boot loop, even if i manage to enter to CWM Recovery menu it says that E: Can't Mount ... bla bla bla
I had been trying to put a custom rom so much that my binary counter is now on 10
I'm going to try what you wrote on the first post!
Restore to stock KI3 firmware using pit file and repartition.
after that install the cf-root kernel. Restart and try to install any custom firmware.
Hope it works
Not it did not work, Maybe the problem was Wipe Partition cache after installing new rom, going to stock and repeating
I'm having this exact same problem, please post here if you find an answer to your problem.
I first installed checkrom with no problems, then i decided to wipe and try install dlevrom but after rebooting i'm left with the same problem as above.
It's only when i flash stock 2.3.5 KI3 through odin with pit, repartition, all checked that my phone works.
I then repeat the steps of flashing cf root through odin and then try flash a custom rom, either checkrom or dlevrom and neither work.
Another try another fail!
I have no idea on what else can I do!!! tried again and nothing! I tied cf-root 4.1 and nothing and cf-root 4.2 and nothing!.
I'm having this exact same problem, please post here if you find an answer to your problem.
I first installed checkrom with no problems, then i decided to wipe and try install dlevrom but after rebooting i'm left with the same problem as above.
It's only when i flash stock 2.3.5 KI3 through odin with pit, repartition, all checked that my phone works.
I then repeat the steps of flashing cf root through odin and then try flash a custom rom, either checkrom or dlevrom and neither work.
Click to expand...
Click to collapse
After i got the stuck on boot! I can restore to stock by only using the PDA, I don't need to set the pit file again!, but I'm usign all the files on Odin to see If that makes any difference but nothing!!!
I wonder how mariosraptor did it!!!! Can you throw us a light???
I have explained it on first post. Just follow step by step the first post directions.
Sent from my GT-I9100 using xda premium
Nope it didn't work
The steps I did:
1. Restore to stock using PIT, PDA, PHONE, CSC.
2. After it boots root the phone with cf root 4.1 for ki3
3. Use CWM Recovery to flash the new rom on internal sdcard.
I have been doing it with wipe data, wipe cache, wipe develk.
Nothing is there a step that im missing?
Thanks
SOLVED!!!!!! JAJAJA
The only problem, was one minor thing, a little thing called Bootloader!
I installed the old bootloader!
find it here: http://forum.xda-developers.com/showthread.php?t=1075278
And after that every thing worked perfectly, no boot loops!!!!
Hope it helps!!!
I have a galaxy S2 I9100M with bell mobility with ICS 4.0.3. It is rooted and running siyah kernel 4.1.2. And for some reason it will not flash ANY Rom. I do the whole wipe process. install the rom. and the phone just gets stuck on the Samsung screen. Won't boot into recovery only download mode? so i have to re flash my stock firmware through odin. I have tried many roms, all with the same outcome? I had previously flashed paranoid 4.1.1 and CM9 9.0.0 before but now it will not let me boot either. Is anyone else having this problem or does anyone know what I'm doing wrong?
Ethanp said:
I have a galaxy S2 I9100M with bell mobility with ICS 4.0.3. It is rooted and running siyah kernel 4.1.2. And for some reason it will not flash ANY Rom. I do the whole wipe process. install the rom. and the phone just gets stuck on the Samsung screen. Won't boot into recovery only download mode? so i have to re flash my stock firmware through odin. I have tried many roms, all with the same outcome? I had previously flashed paranoid 4.1.1 and CM9 9.0.0 before but now it will not let me boot either. Is anyone else having this problem or does anyone know what I'm doing wrong?
Click to expand...
Click to collapse
Sorry about that bro.
Visit this thread, for possible solution to your problem
Good luck
Something I do now after flashing a custom ROM is to "format /system" from the mount menu in recovery and also "fix permissions". Might be worth a try. Also, you could try removing folders on your SD card that contain data that are interfering with booting a custom ROM.
---------- Post added at 09:41 AM ---------- Previous post was at 09:06 AM ----------
Sorry, I should clarify what I said above, as format /system is done prior to flashing. What I do is:
Wipe data/factory reset
Mounts and storage-> Format /system
Flash custom ROM
Wipe Cache
Advanced-> Wipe dalvik cache
Fix permissions
Reboot
Thank's for the responses. I have tried both options and neither work. I managed to flash cm9 through odin but the gapps won't flash threw cwm and the home button is unresponsive in the rom. Very frustrating.
Ethanp said:
Thank's for the responses. I have tried both options and neither work. I managed to flash cm9 through odin but the gapps won't flash threw cwm and the home button is unresponsive in the rom. Very frustrating.
Click to expand...
Click to collapse
Your power button will work as home button too
Swyped from my Galaxy SII
Jokesy said:
Your power button will work as home button too
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Yea i noticed that. I'm just going to keep it stock I don't want to damage it worse then it is.
Hello,
I was trying to do a factory reset on my S2, and I noticed it doesn't delete my other files (Music, Photos, Etc.) but it does reset my apps installed. Because I want to totally erase my files, I went to recovery mode and did a wipe, and I think I may have wiped the data, system, dalvic, etc on the process. And now my phone wont boot up. It is stuck at the Siyah logo (Because I flashed siyah on it before and it was a success). After this, I tried to flash siyah again into my device and its still stuck. I dont know what to do anymore, I also tried factory resetting using recovery mode. I have flashed other kernels but it still doesn't work. BTW I am using a jelly bean device
Newbees said:
Hello,
I was trying to do a factory reset on my S2, and I noticed it doesn't delete my other files (Music, Photos, Etc.) but it does reset my apps installed. Because I want to totally erase my files, I went to recovery mode and did a wipe, and I think I may have wiped the data, system, dalvic, etc on the process. And now my phone wont boot up. It is stuck at the Siyah logo (Because I flashed siyah on it before and it was a success). After this, I tried to flash siyah again into my device and its still stuck. I dont know what to do anymore, I also tried factory resetting using recovery mode. I have flashed other kernels but it still doesn't work. BTW I am using a jelly bean device
Click to expand...
Click to collapse
did you fix permissions ?
slimlo said:
did you fix permissions ?
Click to expand...
Click to collapse
Sorry I'm nub, what is permissions? Can I find that on recovery mode?
Newbees said:
Sorry I'm nub, what is permissions? Can I find that on recovery mode?
Click to expand...
Click to collapse
yep in recovery mode
I found the fix permission Sir. Shall I flash again the kernel and do a fix permission?
Sir, it's still stuck at the Siyah logo
If you've formatted system as you say you will need to flash a rom, I'm running the latest neatrom lite, I'm confused by your post its 4am here
Sent from my GT-I9100 using Tapatalk 2
Hello sir, sorry if I disturbed your sleep XD no I did not flash a ROM. I just flashed a kernel using ODIN. Should I flash a ROM?
If I flash a new ROM, say the latest Snapdragon for S2 will the kernel be included in the package? I still cant pass the logo screen even though I have flashed different kernels
Newbees said:
If I flash a new ROM, say the latest Snapdragon for S2 will the kernel be included in the package? I still cant pass the logo screen even though I have flashed different kernels
Click to expand...
Click to collapse
the kernel is included most all roms doe and also make sure you follow all instructions on flashing properly... always make sure you do a backup )
gl
slimlo said:
the kernel is included most all roms doe and also make sure you follow all instructions on flashing properly... always make sure you do a backup )
gl
Click to expand...
Click to collapse
Thanks Sir Slim, I will try to flash the Snapdragon ROM as soon as after I finish downloading it. Because I believe I have cleared out the operating system and other important data on my device, that's why I need a new ROM.
Hi mate,
Do you run a stock ROM on your phone like you didnt flash any custom ROM on it....
Did you check if the SIYAH kernel you flashed on your device has STOCK ROM support, cause if the siya kernel you flashed has no support for stock rom it will just stay on the siyah logo the whole day until it drains out your battery.....
if you want to go to this website : http://dorimanx.shine.sk/ and dowload the v8.xxx those got stock rom support..... then do a wipe data factory reset....
if your phone booted up, and want to you wipe the phone completely, go to settings and do a factory reset there, your phone will prompt you if you want to wipe the memory card too.... put a check on it then follow the steps okay....
[email protected] said:
Hi mate,
Do you run a stock ROM on your phone like you didnt flash any custom ROM on it....
Did you check if the SIYAH kernel you flashed on your device has STOCK ROM support, cause if the siya kernel you flashed has no support for stock rom it will just stay on the siyah logo the whole day until it drains out your battery.....
if you want to go to this website : http://dorimanx.shine.sk/ and dowload the v8.xxx those got stock rom support..... then do a wipe data factory reset....
if your phone booted up, and want to you wipe the phone completely, go to settings and do a factory reset there, your phone will prompt you if you want to wipe the memory card too.... put a check on it then follow the steps okay....
Click to expand...
Click to collapse
Thank you sir! You are right that I did not have a custom ROM when I installed the Siyah kernel. Maybe that's the reason I was stuck
Newbees said:
Thank you sir! You are right that I did not have a custom ROM when I installed the Siyah kernel. Maybe that's the reason I was stuck
Click to expand...
Click to collapse
Nope it's not the right reasons may be you flashed a wrong siyah kernel.
Tell me your android version is it jellybean or ics
Sent from my GT-I9100 using xda premium
Hi, all!
I have that annoying problem with all the 4.3 ROM I've tried with no exception. Everything is fine until the first reboot. Then it's stuck on the first Galaxy SIII boot logo. I'm using TWRP - the latest version if it matters.
I always wipe everything first.
Please give more details on how you flash it.
Enviado do meu GT-I9305 utilizando o Tapatalk now Free
nikolav75 said:
Hi, all!
I have that annoying problem with all the 4.3 ROM I've tried with no exception. Everything is fine until the first reboot. Then it's stuck on the first Galaxy SIII boot logo. I'm using TWRP - the latest version if it matters.
I always wipe everything first.
Click to expand...
Click to collapse
!!ALL QUESTIONS GO IN THE Q&A FORUM!! OR THEY MAY BE DELETED!!
nikolav75 said:
Hi, all!
I have that annoying problem with all the 4.3 ROM I've tried with no exception. Everything is fine until the first reboot. Then it's stuck on the first Galaxy SIII boot logo. I'm using TWRP - the latest version if it matters.
I always wipe everything first.
Click to expand...
Click to collapse
If you did all required wipes and followed the instructions did you try a different recovery? I read in the SB thread for example of people having issues with TWRP
Sent from my Nexus 7 (2013)
I am sorry for the wrong section. May I ask some to move it to Q&A?
I always wipe data, cash, dalvik cash, system. Then install the ROM and gapps...
After the restart I set up the google account and etc. And after the first restart the phone freezes. That's all.
I'll try with different recovery.
PS. I've just tried CWM recovery 6.0.3.3. and Omega AOSP v9. Still the same.
Try cwm 6.0.3.6 and after you install the rom and after its set up go to recovery and factory reset
nikolav75 said:
I am sorry for the wrong section. May I ask some to move it to Q&A?
I always wipe data, cash, dalvik cash, system. Then install the ROM and gapps...
After the restart I set up the google account and etc. And after the first restart the phone freezes. That's all.
I'll try with different recovery.
PS. I've just tried CWM recovery 6.0.3.3. and Omega AOSP v9. Still the same.
Click to expand...
Click to collapse
That's strange, I run Philz recovery and every 4.3 flash till now went through without issue.
Sent from my GT-I9300 using xda app-developers app
I tried all the recoveries I could find. Including Philz. Still the same.
And something else strange. I installed CWM, CWM, touch and Philz and with them I made backups. After restoration of the backup the phone freezes. I also tried to install Omega 49 and the installation goes OK, but freezes before the first start-up.
The only solution was to install manually TWRP (Odin) to restore some of my old backups. I'm beginning to think that there is something wrong with my phone. It's black if it is important.
Suggest total wipe of phone install your stock rom and test
Hi,
I just want to say I'm also having the same problem.
Started using TWRP with full wipe, same issue on 4.3 and no issues on 4.2.
On latest CWM same problem and 4.2 wont even pass the first boot on Samsung logo.
Also had to use Odin to get back on TWRP and flash a 4.2 rom again.
Anyway there is one more thing I would like to try but haven't had the chance to do so, is installing the latest modem and ril. But I'm kind skeptic about that currently because there is also some risks and my S3 is my daily driver.
Don't change the ril on any custom as you stand a big chance of breaking the calls and Tex's. Modem yes but not ril. Do change to cwm and retry.
andrewwright said:
Don't change the ril on any custom as you stand a big chance of breaking the calls and Tex's. Modem yes but not ril. Do change to cwm and retry.
Click to expand...
Click to collapse
Thanks for the info, I was planning to read more about it before I would make an attempt. BTW already tried CWM that only made things worse, couldn't flash any rom without getting stuck on samsung screen.
bla166 said:
Thanks for the info, I was planning to read more about it before I would make an attempt. BTW already tried CWM that only made things worse, couldn't flash any rom without getting stuck on samsung screen.
Click to expand...
Click to collapse
You are doing a full wipe?. System and data is the main thing to wipe not just factory reset. So go into mounts and storage and format data,system and cache there then flash the rom /gapps.
andrewwright said:
You are doing a full wipe?. System and data is the main thing to wipe not just factory reset. So go into mounts and storage and format data,system and cache there then flash the rom /gapps.
Click to expand...
Click to collapse
yes tried that, also used the mega wipe zip thing
Start fresh and flash stock with Odin then try again after you root and install cwm.
andrewwright said:
Start fresh and flash stock with Odin then try again after you root and install cwm.
Click to expand...
Click to collapse
Tried to go stock and flashed a 4.3 rom again that fixed my problem. =)
Thanks! :good:
I'll try it too. And one stupid question. Where do I find a stock ROM? I never did it before
nikolav75 said:
I'll try it too. And one stupid question. Where do I find a stock ROM? I never did it before
Click to expand...
Click to collapse
http://www.sammobile.com/
Thank you!
But nothing helped. I flashed a stock ROM, with Odin. First I tried with TWRP, and the second time (again after flashing stock) with CWM recovery. I tried two 4.3 ROMs. They both can't boot after the first reboot.
nikolav75 said:
Thank you!
But nothing helped. I flashed a stock ROM, with Odin. First I tried with TWRP, and the second time (again after flashing stock) with CWM recovery. I tried two 4.3 ROMs. They both can't boot after the first reboot.
Click to expand...
Click to collapse
Hi, I think I did the following steps to get it working on my device.
1. Flash stock with odin
2. Hard reset
3. Boot up and finish first run menus
4. Flash twrp with odin
5. Format data with twrp
6. Flash 4.3 rom
This phone is the Samsung Note 2 SHV-E250K.
I have had the this problem occur after a backup. I was messing about with boot animations and when I followed a tutorial on changing it, I ended up with a blank screen as my boot up. I had created a backup before it so I restored. I rebooted and suddenly I was stuck in a bootloop where the olleh splash shows up and then stays there. I followed tutorials to get rid of the bootloop but it has stayed. I wiped my data, the cache, the dalvik cache and even done a factory reset to try and fix my problem. I am still plagued with this. I was wondering if anybody can help me please.
The phone is rooted with TWRP as the recovery. I really need help with this.
Thanks.
Either this or that :/
Two things you can do:
1. Download the firmware from Sammobile and flash it via Odin
2. Download a ROM (Preferably Cyanogenmod) and wipe system -> wipe data -> wipe cache and flash the rom, followed by gapps
Hit thanks if it helped you!
Gokulbalram said:
Two things you can do:
1. Download the firmware from Sammobile and flash it via Odin
2. Download a ROM (Preferably Cyanogenmod) and wipe system -> wipe data -> wipe cache and flash the rom, followed by gapps
Hit thanks if it helped you!
Click to expand...
Click to collapse
Do I have to have CyanogenMod or can I have any ROM?
Like an AT&T Rom and then flash the SJKernal
Let me phrase this better. Cyanogenmod isn't available for my device, but it is available for the AT&T version. Would it be possible for you to give me a step to step guide on how to install that along with touchWiz because I want to keep the S-pen.
stayfrosty48 said:
Do I have to have CyanogenMod or can I have any ROM?
Like an AT&T Rom and then flash the SJKernal
Let me phrase this better. Cyanogenmod isn't available for my device, but it is available for the AT&T version. Would it be possible for you to give me a step to step guide on how to install that along with touchWiz because I want to keep the S-pen.
Click to expand...
Click to collapse
I'm not quite used to a Note 2. I've even read about ROMs for the Note 2, but I think the S-pen would be out of the question.
EDIT: You could try porting a ROM to your Note 2 from another device with the same type of chipset/processor.
Hit Thanks if it helped!
Gokulbalram said:
Two things you can do:
1. Download the firmware from Sammobile and flash it via Odin
2. Download a ROM (Preferably Cyanogenmod) and wipe system -> wipe data -> wipe cache and flash the rom, followed by gapps
Hit thanks if it helped you!
Click to expand...
Click to collapse
Would you please tell where can I find Cyanogen Mod for SHV-E250K? Porting the ROM.... You mean to restore the backup of ROM from other similar phone to mine?
bakhtjs said:
Would you please tell where can I find Cyanogen Mod for SHV-E250K? Porting the ROM.... You mean to restore the backup of ROM from other similar phone to mine?
Click to expand...
Click to collapse
I tried searching, but didn't find any. Anyway, I found an official 4.4.2 update http://nasirtech.blogspot.in/2014/06/e250kktukne6-android-442-kitkat.html?m=1
PFFFFFFFFFFFFFFFFTTT, sent from my i9000
sjkernel SHV-e250k
Hi,
I would like to flash latest CM, I read i can download any AT&T rom>install it> install sjkernel on my SHV-E250K and it will work.
I wanted to try it, where can i get sjkernel? sjkernel thread on xda is dead
flash stock firmware
Gokulbalram: i have also Korean SHV-E250K with boot loop only show galaxy note 2 and no recovery option i try many firmware but still boot loop and no recovery mode please help