hello
my phone has stucked on boot screen
after i flashed stock germany rom through odin
i was running RR jellybean and siyah kernel latest
any help well be reallly appreiciated
ssalehh said:
hello
my phone has stucked on boot screen
after i flashed stock germany rom through odin
i was running RR jellybean and siyah kernel latest
any help well be reallly appreiciated
Click to expand...
Click to collapse
Enter into recovery mode, wipe data, factory reset ,after reboot fix permissions...
ssalehh said:
hello
my phone has stucked on boot screen
after i flashed stock germany rom through odin
i was running RR jellybean and siyah kernel latest
any help well be reallly appreiciated
Click to expand...
Click to collapse
-boot to recovery mode (volume up + home + power buttons)
-perform factory data reset
-reboot phone
phone should boot now
rectangular essrub
...what the other post mentioned and reflashing. Be aware of kernel and what android version you are running.
chefen.chef said:
...what the other post mentioned and reflashing. Be aware of kernel and what android version you are running.
Click to expand...
Click to collapse
He is aware......hes bloomin posted his rom/kernel.Its only you that needs to be aware......lol
Sent from my GT-I9100 using xda premium
chefen.chef said:
...what the other post mentioned and reflashing. Be aware of kernel and what android version you are running.
Click to expand...
Click to collapse
Stop this spamming. Please!
Swyped from my Galaxy SII
Thanks for the first two posts got it fixed
Related
HyDrOG3N-ICS 10.04
http://forum.xda-developers.com/showthread.php?t=1530179
This is ROM is not working on my device, please can anyone help. when i flash it with wipin factory reset & system format after i rebooted the device but the rom is not getting load only startup screen appearing.
My firmware is : XXLA4
Android Version : 2.3.6
Please help me!
if u want to try aokp rom then resurrection rom 1.3 is also good which is customized using aokp and cm9.
CaptaiN Gosh said:
HyDrOG3N-ICS 10.04
http://forum.xda-developers.com/showthread.php?t=1530179
This is ROM is not working on my device, please can anyone help. when i flash it with wipin factory reset & system format after i rebooted the device but the rom is not getting load only startup screen appearing.
My firmware is : XXLA4
Android Version : 2.3.6
Please help me!
Click to expand...
Click to collapse
Usual reason is you are not following the instructions go back and read them then flash again . Make sure you are flashing a zip via CWM recovery .
possibly you would be better flashing a GB rom as a learning point first .
jje
Are you wiping data?
Sent from my GT-I9100 using xda premium
How long did you wait?
It takes the phone a couple of minutes to boot after a wipe.
JJEgan said:
Usual reason is you are not following the instructions go back and read them then flash again . Make sure you are flashing a zip via CWM recovery .
possibly you would be better flashing a GB rom as a learning point first .
jje
Click to expand...
Click to collapse
Yes...i did follow those instruction correctly. but its not working... , i realy like that rom.
macho3215 said:
Are you wiping data?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes am wiping data & formatting the system only.
thelossa said:
How long did you wait?
It takes the phone a couple of minutes to boot after a wipe.
Click to expand...
Click to collapse
I waited more than 5 mins...
MyLifeRocks10 said:
if u want to try aokp rom then resurrection rom 1.3 is also good which is customized using aokp and cm9.
Click to expand...
Click to collapse
thankz bro..ill try that also...!
Hi all I have problem.
I just inadvertently changed permisions to rrr-www----- so phone when Turn on he goes to stock recovery.
Is there sultonion(Bad english sorry) to save phone Without losing data ?
Or Kernel ?
Is Syiah v5 Work with Leaked ?
Paulius7 said:
Hi all I have problem.
I just inadvertently changed permisions to rrr-www----- so phone when Turn on he goes to stock recovery.
Is there sultonion(Bad english sorry) to save phone Without losing data ?
Or Kernel ?
Is Syiah v5 Work with Leaked ?
Click to expand...
Click to collapse
if u have 'Philz' custom recovery then , Goto Advance settings there do FixPermissions and then reboot and see
No i writed i have stock recovery. Is Syiah V5 work with Leaked Jb ?
Paulius7 said:
No i writed i have stock recovery. Is Syiah V5 work with Leaked Jb ?
Click to expand...
Click to collapse
No, It will not Boot ur phone with the Jbleaked rom on it
So What kernel you suggest to me ? flash throught Odin ? And my recovery is stock.
Paulius7 said:
So What kernel you suggest to me ? flash throught Odin ? And my recovery is stock.
Click to expand...
Click to collapse
u can use 'Philz' kernel which is a modified Stock kernel with his latest recovery
I fixed permisions but it's not working.... When i start phone shows samsung galaxy s2 Gt-I9100 with triangle then restarts and goes to recovery....
Sorry For double post but i very need help... I need phone...
Paulius7 said:
Sorry For double post but i very need help... I need phone...
Click to expand...
Click to collapse
then Re-flash the rom once again from ODIN since no other kernels r supporting leaked stock JB rom for now apart from 'Philz' kernel for u
Ok Thank you for help... I fixed.
guys i think i messed up my mobile. I just flashed
http://forum.xda-developers.com/showthread.php?t=1995697 this mod without reading that it was only for jelly Bean 4.1.2
I was on jelly bean 4.2.1 now when i start my phone it is stuck at samsung logo and is giving some sort of vibrating patterns. Guys i am scared as fu** please tell me what should I do?
swapniltiwari said:
guys i think i messed up my mobile. I just flashed
http://forum.xda-developers.com/showthread.php?t=1995697 this mod without reading that it was only for jelly Bean 4.1.2
I was on jelly bean 4.2.1 now when i start my phone it is stuck at samsung logo and is giving some sort of vibrating patterns. Guys i am scared as fu** please tell me what should I do?
Click to expand...
Click to collapse
Restore to your backup that you made before you installed the mod!
squ89r97 said:
Restore to your backup that you made before you installed the mod!
Click to expand...
Click to collapse
i didn't made any backup
swapniltiwari said:
i didn't made any backup
Click to expand...
Click to collapse
it is still opening in recovery . should I flash the ROM again?
Android Revolution hd 30.5
swapniltiwari said:
i didn't made any backup
Click to expand...
Click to collapse
well that was silly :silly:
you can flash through recovery but if' i we're you i'd do a stock rom install via odin. (if i ever get a bootloop, i start from fresh all over again)
squ89r97 said:
well that was silly :silly:
if' i we're you i'd do a stock rom install via odin.
Click to expand...
Click to collapse
What if I install Android Revolution from CWM
I don't have the Stock ROM right now and it is nowehere to be seen in sammobile.com (india)
swapniltiwari said:
What if I install Android Revolution from CWM
I don't have the Stock ROM right now and it is nowehere to be seen in sammobile.com (india)
Click to expand...
Click to collapse
wipe data/factory reset etc. and go for it!
Hello everyone,
i got samsung galaxy S II I9100 4.1.2 stock SEB(Baltic) rom. baseband version: I9100XXMS2. Kernel version: 3.0.31-1071752
And i want to root it by this way http://forum.xda-developers.com/showthread.php?t=1746794 Method #1, - Root_SuperSU.0.96-Busybox.1.20.2-S2-signed.zip to install superSU + busybox v1.20.2 from Linus Yang.
And its not written that i have to wipe data. Can i not wipe data? Cause i got all my settings and all, i know that on most of custom roms you must wipe. But what about just rooting stock?
Thanks in advance, and sorry for bad english, its not my native
Use this link http://forum.xda-developers.com/showthread.php?t=2116549
Edit : you don't need to wipe for just rooting.
Sent from my GT-I9100 using xda app-developers app
Thanks
king_below_my_lord said:
Use this link http://forum.xda-developers.com/showthread.php?t=2116549
Edit : you don't need to wipe for just rooting.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thank you, it worked, i rooted my s2 i pressed that thumbs up button thingy
Christonio said:
Thank you, it worked, i rooted my s2 i pressed that thumbs up button thingy
Click to expand...
Click to collapse
Good!
Now just add [SOLVED] to the title of ur post.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Good!
Now just add [SOLVED] to the title of ur post.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Okay, i done it. Thanks for tip
How to flash easily without Odin?
hi , im using S2 4.1.2 XWLST . How can i flash it with CWM-SuperSU? Is there any corresponding version for this xwlst firmware ????? if there, where i can find the corresponding CWM Super SU file for XWLST? pls help fellas
chemmutk said:
hi , im using S2 4.1.2 XWLST . How can i flash it with CWM-SuperSU? Is there any corresponding version for this xwlst firmware ????? if there, where i can find the corresponding CWM Super SU file for XWLST? pls help fellas
Click to expand...
Click to collapse
Go to philz kernel thread you will get what you are serching follow the op correctly.
Sent from my GT-I9100 using Tapatalk
pls help.... a newbi here
Jeetu said:
Go to philz kernel thread you will get what you are serching follow the op correctly.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
can u post me the link jeetu which mentions xwlst corresponding philz?
chemmutk said:
can u post me the link jeetu which mentions xwlst corresponding philz?
Click to expand...
Click to collapse
Here you go - http://d-h.st/oDn
Download this zip file and flash it from recovery.
Good luck
@jeetu
Jeetu said:
Here you go - http://d-h.st/oDn
Download this zip file and flash it from recovery.
Good luck
Click to expand...
Click to collapse
Thank you a lot jeet..So little more help ...Is this an integrated SuperSu root kernal. ? Or shud i install superSU again.?
2) Can i wipe data and dalvik cache (of the stock kernel) staying inside this kernal itself and flash a Custom rom after wiping ?
i Dont wanna Brick my phone by doing anything wrong. Pls help jeet.
chemmutk said:
Thank you a lot jeet..So little more help ...Is this an integrated SuperSu root kernal. ? Or shud i install superSU again.?
2) Can i wipe data and dalvik cache (of the stock kernel) staying inside this kernal itself and flash a Custom rom after wiping ?
i Dont wanna Brick my phone by doing anything wrong. Pls help jeet.
Click to expand...
Click to collapse
Don't worry buddy just flash this zip file you will get CWM recovery from that you can flash any custom rom whatever you like.
If you stuck anywhere feel free to PM me.
Good luck :thumbup:
Cheers
cannot get into recovery !!!!!
Jeetu said:
Don't worry buddy just flash this zip file you will get CWM recovery from that you can flash any custom rom whatever you like.
If you stuck anywhere feel free to PM me.
Good luck :thumbup:
Cheers
Click to expand...
Click to collapse
im going to root my S2 for first time.im using a 4.1.2 xxwlst version .i want to install NeatRom 3.1 . But i cannot get into recovery by holding Vol UP + home button + power button. Everytime its restarting to main menu only. what to do ?
chemmutk said:
im going to root my S2 for first time.im using a 4.1.2 xxwlst version .i want to install NeatRom 3.1 . But i cannot get into recovery by holding Vol UP + home button + power button. Everytime its restarting to main menu only. what to do ?
Click to expand...
Click to collapse
Try to press these button at a same time mate . Buttons are working properly?
Thanks jeet..
Jeetu said:
Try to press these button at a same time mate . Buttons are working properly?
Click to expand...
Click to collapse
ya...i flashed kitkat rom. The problem was with the Home key. it does have some mechanical issues. When i pressed too hardly , it worked and i got into recovery.
hey jeet , im going to install NeatRom Jelly Bean , i will be flashing from Kitkat rom rite. So inorder to flash JB , shud i change the kernal or not.
chemmutk said:
ya...i flashed kitkat rom. The problem was with the Home key. it does have some mechanical issues. When i pressed too hardly , it worked and i got into recovery.
hey jeet , im going to install NeatRom Jelly Bean , i will be flashing from Kitkat rom rite. So inorder to flash JB , shud i change the kernal or not.
Click to expand...
Click to collapse
To go back on a stock NeatROM:
Go to recovery
Flash Philz kernel from external SD
Reboot recovery
Wipe data/clean to install a new ROM
Flash ROM or restore your nandroid
Reboot device
Is it Safe ?
Jeetu said:
To go back on a stock NeatROM:
Go to recovery
Flash Philz kernel from external SD
Reboot recovery
Wipe data/clean to install a new ROM
Flash ROM or restore your nandroid
Reboot device
Click to expand...
Click to collapse
Is it safe to flash PhilZ Rooting Kernal again from a rooted device running on CMW kitkat kernal + ROM ??
---------- Post added at 09:54 AM ---------- Previous post was at 09:46 AM ----------
chemmutk said:
Is it safe to flash PhilZ Rooting Kernal again from a rooted device running on CMW kitkat kernal + ROM ??
Click to expand...
Click to collapse
forgot to mention , i am already on a NeatROM kitkat 4.4.2..... i want to go bck to NeatRom JB 5.8
Do u knw y the Zip file is so big .?
chemmutk said:
Is it safe to flash PhilZ Rooting Kernal again from a rooted device running on CMW kitkat kernal + ROM ??
---------- Post added at 09:54 AM ---------- Previous post was at 09:46 AM ----------
forgot to mention , i am already on a NeatROM kitkat 4.4.2..... i want to go bck to NeatRom JB 5.8
Do u knw y the Zip file is so big .?
Click to expand...
Click to collapse
Yes if you read OP on Neat rom kitkat 4.4.2 you will know and yes it's the only way to go back to stock.
The zip is so big because it is aroma rom and having lots of mods.
hey guys. Uh, I have samsung galaxy ace S5839i and I flashed rom on it. Then, I found out, it is not such a good rom as I wanted and I have run another rom on it. And there is a problem right now. My phone do not want to turn on. (It is not bricked) It will turn on, but it is stuck on a bootloader (It shows an android logo and under that is Rafael Baugis Kernel). So, I do not know what to do, can you guys help me? Please!!
Thanks in advance!
LiQuDiAk said:
hey guys. Uh, I have samsung galaxy ace S5839i and I flashed rom on it. Then, I found out, it is not such a good rom as I wanted and I have run another rom on it. And there is a problem right now. My phone do not want to turn on. (It is not bricked) It will turn on, but it is stuck on a bootloader (It shows an android logo and under that is Rafael Baugis Kernel). So, I do not know what to do, can you guys help me? Please!!
Thanks in advance!
Click to expand...
Click to collapse
Go to cwm and there clear data/cache..then mount data/system/cache and then flash rom and then reboot..
Which rom u flashed?
Sent from my GT-S5830i using Tapatalk 2
LiQuDiAk said:
hey guys. Uh, I have samsung galaxy ace S5839i and I flashed rom on it. Then, I found out, it is not such a good rom as I wanted and I have run another rom on it. And there is a problem right now. My phone do not want to turn on. (It is not bricked) It will turn on, but it is stuck on a bootloader (It shows an android logo and under that is Rafael Baugis Kernel). So, I do not know what to do, can you guys help me? Please!!
Thanks in advance!
Click to expand...
Click to collapse
Go to CWM and do Wipe data/ factory reset, Wipe Cache partition, Advanced> Wipe Dalvik Cache. Now just flash any other custom rom from CWM or flash the stock rom back using odin. That should solve your problem. Hope I Helped
amolgosavi said:
Go to cwm and there clear data/cache..then mount data/system/cache and then flash rom and then reboot..
Which rom u flashed?
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1862253 this one was the first one and http://forum.xda-developers.com/showthread.php?t=2708888 this second, the last one...
LiQuDiAk said:
http://forum.xda-developers.com/showthread.php?t=1862253 this one was the first one and http://forum.xda-developers.com/showthread.php?t=2708888 this second, the last one...[/QUOTE
2nd rom is cm7.2 so first u have to format your system to ext4..use multiformater for format system to ext4..after that flash biels specific cm kernel..and then flash rom
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
amolgosavi said:
LiQuDiAk said:
http://forum.xda-developers.com/showthread.php?t=1862253 this one was the first one and http://forum.xda-developers.com/showthread.php?t=2708888 this second, the last one...[/QUOTE
2nd rom is cm7.2 so first u have to format your system to ext4..use multiformater for format system to ext4..after that flash biels specific cm kernel..and then flash rom
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Yop, that is exactly what I have done, but phone is still stuck. Do you think, flashing stock rom will fix this?
Click to expand...
Click to collapse
LiQuDiAk said:
amolgosavi said:
Yop, that is exactly what I have done, but phone is still stuck. Do you think, flashing stock rom will fix this?
Click to expand...
Click to collapse
flashing stock roms always helps.
Click to expand...
Click to collapse
LiQuDiAk said:
amolgosavi said:
Yop, that is exactly what I have done, but phone is still stuck. Do you think, flashing stock rom will fix this?
Click to expand...
Click to collapse
Yes flash stock rom thru odin
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Thanks guys!! You've helped me! Thanks so much!:good::good::good: