noob question but just installed hellybean and its a great rom. trying to place widgets on main screens but long press only brings up wallpaper options. is there another way to place widgets?
also play store force closes. tried clearing and stopping program but no good
nyjw said:
noob question but just installed hellybean and its a great rom. trying to place widgets on main screens but long press only brings up wallpaper options. is there another way to place widgets?
Click to expand...
Click to collapse
go into your appdrawer and there should be a tab for widgets(top left).
Just flashed new helly bean but now when fone rings....no ringtone. Is this happening to anyone else?
HellyBean Showcase
Installed Hellybean (9/11/12 version) on my Showcase (Cspire) and it works fine as long as it is in airplane mode. When out of airplane mode I get the constant error of Process com.android.phone stopped unexpectedly. I've flashed it several times but this error is there every time. Have i missed something in the installation process or is it something that can be fixed within the settings. Any help and suggestions greatly appreciated,
nyjw said:
Just flashed new helly bean but now when fone rings....no ringtone. Is this happening to anyone else?
Click to expand...
Click to collapse
I have similar problem on aokp using Devil kernel. Ringer does not work if phone has not been touched for about 30 min or longer. If I understand right this is an issue with deep sleep. Maybe someone can confirm this.
winjen said:
Installed Hellybean (9/11/12 version) on my Showcase (Cspire) and it works fine as long as it is in airplane mode. When out of airplane mode I get the constant error of Process com.android.phone stopped unexpectedly. I've flashed it several times but this error is there every time. Have i missed something in the installation process or is it something that can be fixed within the settings. Any help and suggestions greatly appreciated,
Click to expand...
Click to collapse
Getting this also. really annoying. Using mezmerise clean install from ICS. Touchwiz and alt boot selection., Dont know what to do. ALSO... should a 3 key boot into devil recovery or CWM? I get CMW, but after going to boot, then restart to recovery its Devil
Related
I tried installing this today. My eris has been rooted and working correctly on plane jane and I was told this would be a better rom to use. so I used rom manager and installed KaosFroyo V38. now all i get is errors and my eris does not work. I try rebooting and going into recovery but i can not scroll down. all the options I have is to hit the power button and reboot. I get the lock screen fine but as soon as I unlock the phone I get 'the application autokiller memory optimizer has stopped unexpectedly. please try again. and all I can do is force close. I have spent all day looking for a fix and I am stuck. I do not get any icons to show up. how can I do a full wipe?
User Scary Alien has posted a version of Amon's Recovery that does not require the trackball. See here: http://androidforums.com/eris-all-t...2-custom-recovery-trackball-not-required.html
OMG! Thank you so much! it worked and everything seems to be running great now, I was a little worried there. Thanks again. now I need to go reinstall everything
I just installed Galaxy Task 14 slim coming from CM10 Upgraded cwm to newest through Odin Flashed made a backup and installed Worked great for a few minutes Tried front and back cam out then out of nowhere the screen turned scribbled I cant see nothing not even power off or reboot buttons what do I do?
Galaxy Tab 10.1 p7510wifi
JavaKid said:
I just installed Galaxy Task 14 slim coming from CM10 Upgraded cwm to newest through Odin Flashed made a backup and installed Worked great for a few minutes Tried front and back cam out then out of nowhere the screen turned scribbled I cant see nothing not even power off or reboot buttons what do I do?
Galaxy Tab 10.1 p7510wifi
Click to expand...
Click to collapse
I rebooted and it seems to come up right will someone with more experience please elaborate on what may have been the cause so I can fix whatever happened.
EDIT: Keeps coming back eventualls flashing another kernal now. Any info would be great thanks.
Also tried installing CM10.1 newest out.... Same issue distorts screen with horizontal lines then just kept doing it....Had to restore twice from recovery only one rom works what up? Am I alone in this?
The only stable kernal is 2.6.36.4 but when I flash it doesnt take for newer builds...... Does anyone have the answer? If I dont put the tablet to sleep it works fine once awaken from sleep its scrambled again???
FIXXXED!!!!!!!!!!!
JavaKid said:
I rebooted and it seems to come up right will someone with more experience please elaborate on what may have been the cause so I can fix whatever happened.
EDIT: Keeps coming back eventualls flashing another kernal now. Any info would be great thanks.
Also tried installing CM10.1 newest out.... Same issue distorts screen with horizontal lines then just kept doing it....Had to restore twice from recovery only one rom works what up? Am I alone in this?
The only stable kernal is 2.6.36.4 but when I flash it doesnt take for newer builds...... Does anyone have the answer? If I dont put the tablet to sleep it works fine once awaken from sleep its scrambled again???
Click to expand...
Click to collapse
Did not realize this help section was so dead...... Anyways a few hourse later I discovered this thread pertaining to the issue... Should have a sticky or something its rather important so you don't think your tab is junk. For anyone having this issue go to http://forum.xda-developers.com/showthread.php?t=1975407
Cleared the issue right up I am on the latest cm build and running great no more sleep scribble display crap.
Hi everybody thanks for your help in advance,
My SGs2 is currently running siyah kernel v6.0.0.12 (the fancy one with touch recovery and dual boot).
The problems started when i recently switched from SuperSu to the open-source alternative Superuser. I'm using an app called live logcat (by Chainfire). It shows the logcat entries live as a boot animation. It was all hassle free when I used SuperSu with it. After switching to Superuser it kept getting root permission over and over for at least a minute (a previously common problem). So I was looking forward to getting it fixed since other users reported the same problem. So whenever a new version came out, I tried if it was finally fixed.
After updating to the latest version yesterday and starting the app once again, the phone crashed with the screen turning black (status bar still visible). It then rebooted and a message stating
Android is upgrading..
Starting applications
Click to expand...
Click to collapse
appeared. Whenever I reboot my phone this message appears and won't go away. I can access recovery but clearing cache and/or dalvik cache makes the window say: Optimizing application <x> out of <y>. When it is through with optimizing, 'starting applications' reappears.
I honestly have no idea what else to do.
So my question is how can I get that darn thing to boot correctly?
I'm looking for a solution which doesn't involve factory reset.
If anybody can help he/she is much appreciated.
Last night my phone grew legs and ran all the way across the room while i was sleeping. When i woke up, after searching for my phone for 10 minutes, the vibration no longer works. I didnt know if it was a software or hardware problem. So, I flashed a backup from the day before (where vibration was working) and still no luck. So i flashed back to my current backup, when i rebooted, right before the bootanimation, it vibrates. Odd? It works when the phone is booting up, but not when the phone is booted. I'm running houstonn's Vanilla RootBox (4-20 v1) with houcha kernel. All help is appreciated!
Tyler44346 said:
Last night my phone grew legs and ran all the way across the room while i was sleeping. When i woke up, after searching for my phone for 10 minutes, the vibration no longer works. I didnt know if it was a software or hardware problem. So, I flashed a backup from the day before (where vibration was working) and still no luck. So i flashed back to my current backup, when i rebooted, right before the bootanimation, it vibrates. Odd? It works when the phone is booting up, but not when the phone is booted. I'm running houstonn's Vanilla RootBox (4-20 v1) with houcha kernel. All help is appreciated!
Click to expand...
Click to collapse
Thanks for everyones help...
I was able to fix this, and find the root of the problem (for me atleast). Everytime i click the Dark RootBox, vibration stops working. To fix, you must wipe the device completely, and reflash the rom.
Hi, I apologise if I posted this in the wrong section I wern't sure,
My Galaxy S Wifi 5.0 keeps freezing on start-up, It was working fine until I installed a app called, Go Launcher, once it installed, it was working fine until my device restarted after that, it just freezes after like 1 minute as soon as it comes on, I barely have enough time to put in the start code to unlock the device..
I can't remember what firmware it has, It was a custom one I think of this forum, all I know after I put it on it put a picture of a black tree on the main screen, not sure if that helps sorry..
It is rooted too.
I'm looking for some advice on what I can do to fix this.. I don't want to completly format I have some pictures I kind of don't want to lose.
Any help will be much appreciated.
Thank you in advance.
Try uninstalling it via the Google Play store, and then download another Launcher.
TheKryptonite said:
Try uninstalling it via the Google Play store, and then download another Launcher.
Click to expand...
Click to collapse
Thanks for replying, but I just fixed it, I managed to get into recovery mode and do a wipe data from there, it didn't delete none of my pictures but everything else and fixed my problem.