Hey.
Is it possible to use a micro usb to usb cabel, plug in a usb hub and then 2 xbox 360 usb Controllers? is it possible to Play like n64. with those two Controllers?
Related
Hi,
i have a Cube U23GT tablet. It supports OTG. The tablet can be charged only trough DC in with an adaptor, so not trough usb port. I have an OTG cable, and if i plug with that a mouse in, or keyboard, it works perfectly. I saw on youtube some videos where people connected mouse and keyboard at the same time to their tablets, for example: youtube.com/watch?v=benblX95ORM
So as i saw this video i thinked: all i need is an USB HUB, i bought one: logilink.eu/showproduct/UA0138.htm?seticlanguage=en
I plugged the HUB in trough OTG and the result was: the LED of the hub lights are on, but then, when i try to plug the mouse OR (not just "AND") the keyboard, it wont work. The infra of the mouse is lights too but the tablet dont detect it, i cant use it.
So can you tell me what can be the problem? Its not a powered HUB i know, but on the videos that i saw (for example what i linked here) arent powered hubs too, and works.
If you can, please help me, thanks!
Has anyone tried or know if i can connect usb port replicator to an android phone with OTG cable.
The idea s can i essentially connect 2 monitors to an android device and then use them with VNC to connect to actual computers therefore being able to use the tablet/phone as a very portable computer.
Regards
just tried it with an otg adapter on my note 3 and a lenovo port replicator.
usb ports work fine (keyboard, mouse etc) but I cannot get the monitor to light up...
I've noticed that USB OTG isn't as complete as it used to be since KitKat update..
I can still use usb keyboards however all my controllers have stopped working.
Previously I was able to use ps1/2 controllers via usb adapter and now I can't!
Wired 360 controllers don't work either..
Anyone know of a work around?
Hi all, I have a MK809III tv stick with Android 4.4.2 running. I use it as a mini PC with a LCD screen. I have attached to its USB OTG ports a quadrate 2.0 4 ports USB HUB (google for this and you can see it) , and connected to it, a PS/2 keyboard (using an usbtoPs2 adapter), an usb mouse, a usb ethernet dongle, and a usb sound card dongle. When I use this combo, all works fine, the mouse can drag and select, also wheel works, the keyboard works fine, the ethernet run smooth, and the sound works as player and mic recorder, the only thing not works is to reboot the tv stick, and launch android again (with other MK89III tv stick this also works flawlessly), to get this, I must to unplug RJ45 or usb ethernet. But this last question is not my main problem. The main problem is that I can not make the combo work anyway if I change usb hub model, If I use a 2.0 usb square hub (no name brand) with a little blue led installed, all works fine, but using other hub (I have tested two others), thare is no way to work. The main situation is that the hub stops work, and all item connected not works at all. But commonly, mouse works with a bad behaviour in button response, usb sound disconnects suddenly, or usb ethernet lagg or not works at all. My question is about this behaviour with usb hubs, if there is a special requirements in hardware to match an usb hub with this kind of android devices, or if thare are some drivers that can solve this.
Thank in advance.
Solved
I have solved the two main problems in order to use my MK809III RK3188 as a mini pc with usb hub and rj45 ethernet. The hub must to be a chip on board one, no an all-in-one glued ultra-cheap type, this is a mark of better quality and response, then you can conect keyboard/mouse, usb or ps2 with usb converters, usb sound, and usb pendrives. The ethernet must be an ASIX AX88772C, this a true usb ethernet 100mbps (7MB/s real) device, since I use it there is no lag, no boot errors, no delays or shorts in Tx/Rx. That´s all.
i recently brought a OTG Cable & USB Hub so i can Connect my Wired Mouse & Keyboard to my Device, i first test the OTG Cable with the Mouse Only to test if it works, and it does, then i Switch to Keyboard, which also works, so then i Connect the OTG Cable to the USB Hub and Plug the Mouse and Keyboard to the Hub, the problem is only the Mouse were Connected, not the Keyboard, i tried Unplugging the Mouse from the Hub, the Keyboard still won't connect i want to be able to use Both Mouse and Keyboard on my Device, if someone can help me with this, I'll really appreciate it, thanks!
Device: Xiaomi RedMi Note 2 with Resurrection Remix-N v5.8.2, SuperSU-Rooted Systemlessly
Mouse: Optical Mouse, 5V, 50mA
Keyboard: Dell USB Keyboard, 5V, 100mA