Just bought this tablet this morning. Found out that the programs have been signed with the wrong id. Can't update programs without deleting them, which means I need to root the device. I'd like to know if any of the rooting methods are better than any other if they work. I'd also like jellybean. Would I have to try and make a custom rom? Or could I try one from another tablet?
I'd be grateful for some help, but I know everyone is busy with more interesting stuff, so I'll wait patiently.
In the mean time I'll try some of the methods out there and hope I don't brick the device.
jack3643 said:
Just bought this tablet this morning. Found out that the programs have been signed with the wrong id. Can't update programs without deleting them, which means I need to root the device. I'd like to know if any of the rooting methods are better than any other if they work. I'd also like jellybean. Would I have to try and make a custom rom? Or could I try one from another tablet?
I'd be grateful for some help, but I know everyone is busy with more interesting stuff, so I'll wait patiently.
In the mean time I'll try some of the methods out there and hope I don't brick the device.
Click to expand...
Click to collapse
+1 on the questions.
I think for root, some tools using generic exploits for 4.0.3 might work. but for custom roms we might be out of luck.
tabletrepublic.com/forum/iview-760tpc-ployer-momo9/iview-760tpc-k-ployer-momo9-firmware-rom-releases-1610.html
Go here there is lots of information about all winner A10 tablets..
we all should be polite enough to press thanks for anyone who helped US.
AJ88 said:
tabletrepublic.com/forum/iview-760tpc-ployer-momo9/iview-760tpc-k-ployer-momo9-firmware-rom-releases-1610.html
Go here there is lots of information about all winner A10 tablets..
we all should be polite enough to press thanks for anyone who helped US.
Click to expand...
Click to collapse
Thanks. does that mean we can use the ICS 4.04 firmware from http://en.ployer.cn/support.php?id=3 along with the install guide from it? (and that the firmware between the bauhn and momo units is the same, or compatible, despite physical appearance differences (like physical keys, and pooosibly another CPU (the bauhn tablets are all Amlogic Cortex A9...if the A10 in the allwinner is the CPU type ref))?
also, any idea if the page you linked to has cooked roms with root included?
OK.
Rooted with this...
http://forum.xda-developers.com/showthread.php?t=1601038
Seems to work. Have deleted youtube.apk from the system directory. Rebooted. Installed youtube 4.06? (I think) Now youtube just won't run. Did a full factory reset and cache wipe from recovery (wasn't even sure recovery existed on this thing, but there you go). Installed youtube again. Still doesn't work even after deleting program cache and deleting settings from app menu.
Will see how I go with the link from AJ88. See where it leads.
More later.
You may use 4.0.3 firmware in your tablet and may use clockwork recovery 5 in your tablet...
Many people use this firmware in micromax funbook..
Just give it a try many things in this player momo tab and your device is same..so do at your risk..
First try to run recovery if you can flash it successfully first backup your current firmware so that in future if things goes wrong you can get your original device back.
Best luck
we all should be polite enough to press thanks for anyone who helped US.
---------- Post added at 05:41 PM ---------- Previous post was at 05:34 PM ----------
If bauhn tablet is running on cortex A9 processor than this will not work for you...
Because this Chinese custom Roms and all stuff there on tablet republic is for A10 all winner tablets...
Inspite of that just read that forum throughout may be you can find any answer..
Or you can PM That forum admin for further help
we all should be polite enough to press thanks for anyone who helped US.
So I have to find firmware compatible with my processor and other hardware inside this thing? Do I have that right?
Time to start looking for something with the same hardware.
Yes that's because if your device ram is 512 and you flash a firmware of device which has 1gb ram than how it operate?
Same for processor
we all should be polite enough to press thanks for anyone who helped US.
Thanks AJ88. Do you know any common tablets with these specs?
Specification
CPU - Amlogic Cortex A9 8726-MX Dual Core Processor
Processor - 1.5GHz
Operating system - Google Android 4.0
Display - IPS 9.7" 4:3, LCD panel
Resolution - 1024 x 768 resolution
Touch Screen - Capacitive Multi touch
Battery life - Li-Polymer, (up to 6 hours)
Internal Memory - 16 GB (expandable with micro SD memory card)
Memory - DDR3 1GB
WLAN / Wi-Fi - IEEE 802.11 b/g/n
Bluetooth - 2.1
UMTS / 3G - No
G Sensor - Screen Rotation
Cameras - Web Cam 0.3, 2.0 Megapixels rear camera
Microphone - Internal Microphone
USB 2.0 Input
Headphone Jack - 3.5mm Stereo Output
HDMI Output
Google about it..
we all should be polite enough to press thanks for anyone who helped US.
AJ88 said:
Google about it..
we all should be polite enough to press thanks for anyone who helped US.
Click to expand...
Click to collapse
these might be silly questions, but since we now have root access - is there a standard Cyanogen mod for ICS we can install/along with the required CWM or do those need to be custom made for the specific customization of ICS 4.0.3/rom/kernel/bootloader/etc?
Not silly at all as far as I'm concerned.
But; from what I've read, there is no ROM that can be installed on everything. They all have to be modified to suit the hardware.
I'm still looking into ROM kitchens at this point to figure out what needs to be done to create a ROM.
Needless to say, this'll take a while though.
jack3643 said:
Thanks AJ88. Do you know any common tablets with these specs?
Specification
CPU - Amlogic Cortex A9 8726-MX Dual Core Processor
Processor - 1.5GHz
Operating system - Google Android 4.0
Display - IPS 9.7" 4:3, LCD panel
Resolution - 1024 x 768 resolution
Touch Screen - Capacitive Multi touch
Battery life - Li-Polymer, (up to 6 hours)
Internal Memory - 16 GB (expandable with micro SD memory card)
Memory - DDR3 1GB
WLAN / Wi-Fi - IEEE 802.11 b/g/n
Bluetooth - 2.1
UMTS / 3G - No
G Sensor - Screen Rotation
Cameras - Web Cam 0.3, 2.0 Megapixels rear camera
Microphone - Internal Microphone
USB 2.0 Input
Headphone Jack - 3.5mm Stereo Output
HDMI Output
Click to expand...
Click to collapse
If you find something that works let me know. I'm happy with ICS on mine, but I've found that the USB firmware is not exactly perfect and doesn't work properly through the Android API. You have to resort to the Kernel Native driver. I wouldn't mind finding a firmware that actually works properly.
If anyone is making a rom for this device, I'll be happy to assist, but i don't have any programing skills.
There are too many bugs on this system with Ice scream sandwich and hoping a rom would clean them out. Especially with updating the youtrube app on Google play.
paul.pavlinovich said:
If you find something that works let me know. I'm happy with ICS on mine, but I've found that the USB firmware is not exactly perfect and doesn't work properly through the Android API. You have to resort to the Kernel Native driver. I wouldn't mind finding a firmware that actually works properly.
Click to expand...
Click to collapse
Try the Ainol novo7 Elf2 Tablet at SlateDroid.com
After countless protests we've finally gotten the company AMLogic and Ainol to release sources. Though its dirty and incomplete, its something.
Some had a go at making CM9 too. The tablet uses the same SoC (AML-M6) so it has some compatible drivers, it would need to be cooked a certain different way to make it compatible though.
As for r00t, try:
SuperOneClick http://forum.xda-developers.com/showthread.php?t=803682
Download: http://shortfuse.org/?p=193
That should work, if it doesn't then try:
CF_ROOT http://forum.xda-developers.com/showthread.php?t=1687590
Download: https://play.google.com/store/apps/details?id=eu.chainfire.adbd
And if that shouldn't work, this one is guaranteed to work:
ADB Remount Timing Exploit *NEW*
http://forum.xda-developers.com/showthread.php?t=1886460
And if that didn't work, then its not the tablet's fault, you're to blame ; )
Kangal said:
Try the Ainol novo7 Elf2 Tablet at SlateDroid.com
After countless protests we've finally gotten the company AMLogic and Ainol to release sources. Though its dirty and incomplete, its something.
Some had a go at making CM9 too. The tablet uses the same SoC (AML-M6) so it has some compatible drivers, it would need to be cooked a certain different way to make it compatible though.
As for r00t, try:
SuperOneClick http://forum.xda-developers.com/showthread.php?t=803682
Download: http://shortfuse.org/?p=193
That should work, if it doesn't then try:
CF_ROOT http://forum.xda-developers.com/showthread.php?t=1687590
Download: https://play.google.com/store/apps/details?id=eu.chainfire.adbd
And if that shouldn't work, this one is guaranteed to work:
ADB Remount Timing Exploit *NEW*
http://forum.xda-developers.com/showthread.php?t=1886460
And if that didn't work, then its not the tablet's fault, you're to blame ; )
Click to expand...
Click to collapse
Thanks heaps,
I have successfully rooted my AMID-972XS device using the 3rd option, "ADB Remount timing Exploit *NEW*"
Removed youtube.apk with ES File Explorer from Google play Store.
Downloaded youtube app from http://forum.xda-developers.com/showthread.php?t=1699849 and installed it using Astro, from Google play store.
All works fine, thanks heaps
Hi, I'm experiencing weak wireless signal on the AMID-972XS while other devices like phone and laptop seem to pick a better signal at the same location.
Has anyone had this problem? I'm wondering if it's normal due to the hardware spec of the wireless card or is my unit faulty.
mrbarbz said:
Hi, I'm experiencing weak wireless signal on the AMID-972XS while other devices like phone and laptop seem to pick a better signal at the same location.
Has anyone had this problem? I'm wondering if it's normal due to the hardware spec of the wireless card or is my unit faulty.
Click to expand...
Click to collapse
mine works better than my phone and two laptops wifi reception-wise
svyr said:
mine works better than my phone and two laptops wifi reception-wise
Click to expand...
Click to collapse
I first thought it was a faulty tablet then I replaced it and I'm having the same problem with the new one.
When I try and load a youtube videos it takes a while and when it loads it keeps cutting out.
I check the wireless bar and find that there's only 2 of the 3 bars of signal.
But on my iPhone same located youtube videos load fast and no drop outs.
Related
Hello i bought a Flytouch 5, I'm wondering what people know about this tablet.
And also i like to learn here if it's possible to change the Android version to one that are around here.
I'm not really happy with the pre installation that came from the manufacturer. It works but i know it can be better.
I would be really happy with any info what is out there about this tablet.
Info from tablet.
Model Number: YOSPAD
Android Version: V2.3 2011-07-17(001112)
Kernel Version: 2.6.32.9 [email protected] #216
Build Version:FR858
Update
I noticed to that when i post with the tablet the footnote on the bottom of the message says "Sent from my mercury using XDA App"
I hope this extra info will help.
Operating System Android 2.3
Model Fly Touch 5
Product Type Tablet
Keyboard Touch screen
Battery Type 6400MAH Li-ion Battery
Battery / Run Time (up to) about 4~6 hours
Power Device Type AC Adapter
Voltage required 100/240V
Miscellaneous / Color Silver
Dimensions / W x D x H 170.mm(W) x 270.0mm(D) x 16.mm(H)
Net Weight 0.68kg
Performance
Processor Type ARM 11
Processor Clock Speed 1GMHz
Processor Model Infotmic X220
Cache Memory / Type I-Cache
Cache Memory / Installed Size 2M
RAM / Technology DDR 2
RAM Installed Size 512MB
Display Diagonal Size 10.2 inch
Max Resolution 1024 X 600
Display Technology Resistive touch screen
Graphics Type Integrated Graphics
Graphics Model Support 1080P
Storage and Expansion
Hard Drive Type NAND Fast Flash
Hard Drive Capacity 4GB
Hard Drive Spindle Speed NAND Fast Flash
PCMCIA Expansion Support 16GB MAX
Communications
Net Connection
Fast Ethernet
Wireless Connection
Wifi
Wireless Protocol 802.11 b/g
Support Format
Video RM/RMVB,DAT,MPG,VOB,MP4,
AVI/MK,TS,FLV,WMV,MOV
Audio MP3,AAC,AAC+,EAAC+,
WMA,WMA PRO,RA
Picture JPG, GIF, BMP ,PNG
Ebook TXT(Support TTS reading function)
Input/Output Connectors
Ports
2 x USB
1 x Output HDMI
1 x SD slot
1 x DC jack
1 x Ethernet Jack
Digital Zorro said:
Hello i bought a Flytouch 5, I'm wondering what people know about this tablet.
And also i like to learn here if it's possible to change the Android version to one that are around here.
I'm not really happy with the pre installation that came from the manufacturer. It works but i know it can be better.
I would be really happy with any info what is out there about this tablet.
Info from tablet.
Model Number: YOSPAD
Android Version: V2.3 2011-07-17(001112)
Kernel Version: 2.6.32.9 [email protected] #216
Build Version:FR858
Click to expand...
Click to collapse
Hi, I have the same one since a week ago. Unfortunatelly I updated it with another Android OS and now I don't have WIFI. May I ask you if you are still on the original firmware to send me the file wpa_supplicant.config? Or if you have the original ROM it will the best way if you can send me the link to download it. Thanks.
teddy_irish said:
Hi, I have the same one since a week ago. Unfortunatelly I updated it with another Android OS and now I don't have WIFI. May I ask you if you are still on the original firmware to send me the file wpa_supplicant.config? Or if you have the original ROM it will the best way if you can send me the link to download it. Thanks.
Click to expand...
Click to collapse
Yes i still have the original firmware installed.
I really like to help you solve your problem. How i do get the "wpa_supplicant.config" File from the tablet?
Digital Zorro said:
Yes i still have the original firmware installed.
I really like to help you solve your problem. How i do get the "wpa_supplicant.config" File from the tablet?
Click to expand...
Click to collapse
Thank you for your answer! Is your device rooted? Because only if it's rooted you can go to the folder where the file is. Or maybe you have the ROM? That will be the best way if you have the ROM to send it to me. Or to ask your reseller to send it to you? By the way where did you buy it from? That might help me to obtain the original firmware.
Thanks
teddy_irish said:
Thank you for your answer! Is your device rooted? Because only if it's rooted you can go to the folder where the file is. Or maybe you have the ROM? That will be the best way if you have the ROM to send it to me. Or to ask your reseller to send it to you? By the way where did you buy it from? That might help me to obtain the original firmware.
Thanks
Click to expand...
Click to collapse
How is the folder named? Let me look in to that first, i don't think the site allows direct company names that sell this product.
I'm surprised about the low info here on this tablet.
Maybe new info i found will help, it's also known as superpad.
And I'm sure it's no fake. Google it. I will not advertise here.
Still need some good info and answers.
Send from my Flytouch 5. (Mercury)
I bought one of these chunks of crap, it ran for 24 hrs now it won't boot it had newer yospad firmware but I can't remember the exact build cause it won't boot now. What I need to know is how to do a hardware reset, not the little reset button it just restarts it or another yospad rom.
Any help would be greatly appreciated thanks
Sent from my V9 using Tapatalk
Found out how to hard reset this chunk of gold and its good now
Peace
Sent from my GT-I9000 using Tapatalk
richarddwyer10 said:
I bought one of these chunks of crap, it ran for 24 hrs now it won't boot it had newer yospad firmware but I can't remember the exact build cause it won't boot now. What I need to know is how to do a hardware reset, not the little reset button it just restarts it or another yospad rom.
Any help would be greatly appreciated thanks
Sent from my V9 using Tapatalk
Click to expand...
Click to collapse
I see you already found it...This for the people who still don't know it. http://www.youtube.com/watch?v=YyWTEr2NeDo
I think Gingerbreak might of bricked this but now this is running I'm reluctant to try again. Have you rooted you're yospad yet?
I've been sent the latest firmware from the supplier as well as the flash player file if you want it
Sent from my V9 using Tapatalk
Upgrade file for YosPad
How were you able to upgrade the firmware and flash file on your YosPad ?
mikeema said:
How were you able to upgrade the firmware and flash file on your YosPad ?
Click to expand...
Click to collapse
Yes, i'm interested in that too.
Yes format SD card put Fw update on SD and turn power on and it will flash itself. Btw use z4root to root this because it is fake back ported 2.3 in other words its 2.2
Sent from my V9 using Tapatalk
Who the hell gives names to this devices .. ? Flytouch 5 ? zomg!
this is the ONLY company that has the Infotmic SoC available for implementing into tablets:
http://www.shuoying.com/global/index.asp
http://www.shuoying.com/global/Product.asp?/3.html (tablet page)
I Know that, cause I personally visited the head of Infotmic SoC design (Shenzhen) and ShuoYing CEO, also in Shenzhen (Infotmic HQ is from Shanghai)
If there is any other tablet with "Flytouch" design, then they are tempered from the original tablet made by Shuoying, or they are so wild that it is really a mystery of it's origin.
My guess is that those are regular FT2 (since all have the same CPU) tweaked by some wild chinese people, Kernel and OS, and RAM/ROM
not to all - dont buy tablets from companies that dont show up in 1-2 hours search. You'll end up with tablet that someone assembled by hand and a screwdriver, and most probably extremely bad OS.
flashing rom on yospad
Use only Z4 to root the yospad. Can someone leave link for fw flash for yospad
Igoritza said:
Who the hell gives names to this devices .. ? Flytouch 5 ? zomg!
this is the ONLY company that has the Infotmic SoC available for implementing into tablets:
http://www.shuoying.com/global/index.asp
http://www.shuoying.com/global/Product.asp?/3.html (tablet page)
I Know that, cause I personally visited the head of Infotmic SoC design (Shenzhen) and ShuoYing CEO, also in Shenzhen (Infotmic HQ is from Shanghai)
If there is any other tablet with "Flytouch" design, then they are tempered from the original tablet made by Shuoying, or they are so wild that it is really a mystery of it's origin.
My guess is that those are regular FT2 (since all have the same CPU) tweaked by some wild chinese people, Kernel and OS, and RAM/ROM
not to all - dont buy tablets from companies that dont show up in 1-2 hours search. You'll end up with tablet that someone assembled by hand and a screwdriver, and most probably extremely bad OS.
Click to expand...
Click to collapse
I think your completely right there.
I use it for a remote control know.
Thanks for the input btw.
Digital Zoro - im sorry for your failed tablet device.
On the other hand - I find the FT2 design to be the best tablet design ever. it obviously lacks the fine finish, and better materials, but - 10 inch wide tablet, with every god damn port there is - pure win.
I saw the "actual" FT3 in Infotmic Shenzhen, and it looks awesome - capacitive screen, ARM Cortex A8 based infotmic SoC (about time dudes, you are sooo late) .. dont know why isnt out yet, cause all those named "FT3" dont have same specs as the one I saw.
Igoritza said:
Digital Zoro - im sorry for your failed tablet device.
On the other hand - I find the FT2 design to be the best tablet design ever. it obviously lacks the fine finish, and better materials, but - 10 inch wide tablet, with every god damn port there is - pure win.
I saw the "actual" FT3 in Infotmic Shenzhen, and it looks awesome - capacitive screen, ARM Cortex A8 based infotmic SoC (about time dudes, you are sooo late) .. dont know why isnt out yet, cause all those named "FT3" dont have same specs as the one I saw.
Click to expand...
Click to collapse
My Flytouch 5
The design is not really bad and i like that it has the rj-45 port.
The screen I find bad. No multitouch and slow reaction when touched.
Its thick and heavy to hold.
Flytouch 5 should have GPS build in, but it doesn't.
The Flytouch 2 3 4 5 are all the same design. On one moment it lost the second mini sd slot.
Is this only with the fake ones?
No, they are all faulty. the forementioned Shuoying company makes crapy tablets
I took for bussines 30 units the first time around, and I still have 6 broken units. others had flaws, mostly of how they are assembled - everything is sticking out, and such. USB/SD slots die more often than you could imagine.
buttons are the biggest problem - they are not glued in & soldered - they are JUST soldered. so the only thing that holds them into place is Tin (Sn) and we all know how that is firm and solid
oh, there is also a screen problem - there are 3 types of ZIF wire-to-board connector types for the screen, so if you ever need a screen replacement - dont even think about it.
the best assembled chinese tablet is from a company Utopia, in my expirience. you can find them by the name "imx515" A8 or A10 tablet. it turns out that solutions for assemble is better than most of the branded companies.
Hi,
I have an HCL ME Tablet Model AP10-A1. Technical Specifications are mentioned below.
- High-performance, low-power system, Cortex A9, 1GHz Processor (Dual Core)
- 10 inches super slim Capacitive multitouch display
- 1GB (DDR II RAM)+16GB iNAND (In-Built )+ Micro SD card for expandibility upto 32GB
- GPS/E-compass ( This doesn't work on my unit )
- Wi-Fi – 802.11 b/g/n
- Bluetooth 2.1 + EDR
- Built in 3G (HSDPA/HSUPA)
- Inbuilt 1.3MP Front Camera
- 3D Accelerometer
- Light Sensor
- Full HD 1080p video playback
- SD / MMC slot
- 1×USB 2.0 & 1×USB mini
- Headphone & MIC: 3.5mm stereo jack & Internal MIC
- SIM card Slot
- Docking port connector for expandibility to USB2.0×1,Ethernetx1,HDMIx1
- Speaker: 2 x 1W (built in highquality speaker)
- Android 2.2 (Froyo) OS
- Built-in Li polymer rechargeable 3650mAH battery
- Dimension: 267 x 173 x 11-14.3mm
- Weight (Kg): 750gm
I see the maker of the device as "Nvidia" in Android Market.
I rooted this device successfully. But now, I want to upgrade it to Gingerbread or any other better version of Android. I don't know which ROM to use. I tried googling a lot but seems I am the only person who bought this device. Can you guys please help me with this? If you guys need anymore details here, please let me know.
I have rooted my Samsung Galaxy I7500 in past and has been playing with it since years, meaning, I know what root is, ROM is and other related commands, etc.
-Javid
*EDIT*
Our tab is tasting Honeycomb here..
http://forum.xda-developers.com/showpost.php?p=20100557&postcount=42
No reply yet
Sent from my AP10-A1 using XDA App
dude even I'm searching for the same....
even I got one HCL AP10 A1.. bought from ebay...
aah.. I too got it from ebay. atleast we can start sharing our apps / experiences until someone gets us an update.
have you changed the recovery on it? or still the stock one?
do you have any wonderful achievements on it?
well it kinda sucks doesnt it .. even i have got the same one ... things i of what i know ppl use rom manager after rooting .. but after installing rom manager .. what i noticed was that HCL is not at all in their list ... for crying out loud it even has Spice Mi tablet on their list but not HCL .. so i think we are stuck
it doesn't really suck that much.. hehe. I love the performance of it.. almost everything works with mine.. Skype Video calls, High End Games (Trial Extreme, etc), Jabber VOIP Calls, etc. I use VTL Launcher and it adds a lot of space on this tab. I use MultiLing Keyboard for Tab which increases the productivity. I wanted to make Junos Pulse Work on it. If that works, I see nowhere else. Any help there guys? may be the tun.ko file is needed for this
Please use the Q&A Forum for questions Thanks
Moving to Q&A
its a good tab... i played all high end games THD games on it... using wifi/ 3g/2g for browsing and chatting with friends... installed spb 3d shell...
here is my email id [email protected] sajavid.
Thanks lufc.
Parmesh, is gps working on your unit? Mine juz doesn't lock my position. Neither I see the gps icon in statusbar like other android phones.
Sent from my AP10-A1 using XDA App
I too am planning to buy this tablet.
I'm quite sure its either the Malata SMB-A1004 or The SMB-A1009.
If it is then you all can install honeycomb meant for the Notion Ink Adam.
Here is the link to the Adam ROM http://www.megaupload.com/?d=V4T971PL
Learn to use nvflash first if in case u brick the pad.
Then flash it in recovery mode.
If any of u r successful, pls post it.
HCL ME Tablet AP10-A1
i am planning to buy HCL ME Tablet AP10-A1 but before i go ahead i had some questions in my mind.
i would really apprciate if some one could answer them.
1)how is the touch screen response, is it pretty good or just ok?
2)does it has android market installed by default, if not can it be installted by rooting in to the device?
3)have you tried upgrading this device to gigerbread or honeycomb? is it possible?
4)how is the 3G coverage from this device?
5)how is the overall build quality, si it cheap or looks up market?
what is your final verdict on this tap, should i go ahead and buy it?
sajavid said:
Hi,
I have an HCL ME Tablet Model AP10-A1. Technical Specifications are mentioned below.
- High-performance, low-power system, Cortex A9, 1GHz Processor (Dual Core)
- 10 inches super slim Capacitive multitouch display
- 1GB (DDR II RAM)+16GB iNAND (In-Built )+ Micro SD card for expandibility upto 32GB
- GPS/E-compass ( This doesn't work on my unit )
- Wi-Fi – 802.11 b/g/n
- Bluetooth 2.1 + EDR
- Built in 3G (HSDPA/HSUPA)
- Inbuilt 1.3MP Front Camera
- 3D Accelerometer
- Light Sensor
- Full HD 1080p video playback
- SD / MMC slot
- 1×USB 2.0 & 1×USB mini
- Headphone & MIC: 3.5mm stereo jack & Internal MIC
- SIM card Slot
- Docking port connector for expandibility to USB2.0×1,Ethernetx1,HDMIx1
- Speaker: 2 x 1W (built in highquality speaker)
- Android 2.2 (Froyo) OS
- Built-in Li polymer rechargeable 3650mAH battery
- Dimension: 267 x 173 x 11-14.3mm
- Weight (Kg): 750gm
I see the maker of the device as "Nvidia" in Android Market.
I rooted this device successfully. But now, I want to upgrade it to Gingerbread or any other better version of Android. I don't know which ROM to use. I tried googling a lot but seems I am the only person who bought this device. Can you guys please help me with this? If you guys need anymore details here, please let me know.
I have rooted my Samsung Galaxy I7500 in past and has been playing with it since years, meaning, I know what root is, ROM is and other related commands, etc.
-Javid
Click to expand...
Click to collapse
Hey, even I got this tablet from eBay, and came without warranty... and guess what, I also have issue with the GPS...it doesn't work is that the problem with all these models??
I have one more problem, it has facility of inserting Sim Card, but I am not able to make the voice calls from my Airtel SIM (2G). However, I am able to send and receive messages just like normal mobile phones. Do you have any idea about this?
One more thing to add, as it doesn't have warranty, it's product no. is not registered with HCL Service center and they are not able to provide any support on this.
Mine also comes with Nvidia Tegra.
Can you please guide me how to root it successfully? Does Android Market work after rooting it?
---------- Post added at 08:58 PM ---------- Previous post was at 08:49 PM ----------
Can anybody please suggest which all applications or games are worth keeping on this tablet?
I am currently using a few games like Angry Birds, Fruit Ninja, Chess etc. Apart from that it works as a good e-book reader...good to read books on big screen
Also, did any of you manage to register it for HCL support atleast, if not the warranty?
Even if it is a bit bulky, I feel it is worth the price we got on eBay!!
Please keep posting your experiences and new things you learn about it, which others can take advantage of
chaskarn said:
i am planning to buy HCL ME Tablet AP10-A1 but before i go ahead i had some questions in my mind.
i would really apprciate if some one could answer them.
1)how is the touch screen response, is it pretty good or just ok?
2)does it has android market installed by default, if not can it be installted by rooting in to the device?
3)have you tried upgrading this device to gigerbread or honeycomb? is it possible?
4)how is the 3G coverage from this device?
5)how is the overall build quality, si it cheap or looks up market?
what is your final verdict on this tap, should i go ahead and buy it?
Click to expand...
Click to collapse
1)how is the touch screen response, is it pretty good or just ok?
A) its Awesome...
2)does it has android market installed by default, if not can it be installted by rooting in to the device?
A) android Market is not available by default.
3)have you tried upgrading this device to gigerbread or honeycomb? is it possible?
A) No update on.. and we are getting this tab with 2.2 test keys
4)how is the 3G coverage from this device?
A) Working fine.. No issues with 2 g 3g n wifi
5)how is the overall build quality, si it cheap or looks up market?
you can compare this tab with samsung tablets....
what is your final verdict on this tap, should i go ahead and buy it?
for 15k its worth to take it ...
---------- Post added at 12:57 AM ---------- Previous post was at 12:37 AM ----------
sajavid said:
Thanks lufc.
Parmesh, is gps working on your unit? Mine juz doesn't lock my position. Neither I see the gps icon in statusbar like other android phones.
Sent from my AP10-A1 using XDA App
Click to expand...
Click to collapse
No GPS is not working .. i have installed mapmyindia and it was not locking the location...
we can fix all this issues once we upgrade this device to final FROYO version or 2.3 Gingerbread version..
---------- Post added at 01:11 AM ---------- Previous post was at 12:57 AM ----------
kank_fraud said:
I too am planning to buy this tablet.
I'm quite sure its either the Malata SMB-A1004 or The SMB-A1009.
If it is then you all can install honeycomb meant for the Notion Ink Adam.
Here is the link to the Adam ROM
Learn to use nvflash first if in case u brick the pad.
Then flash it in recovery mode.
If any of u r successful, pls post it.
Click to expand...
Click to collapse
I think it is SMB-A1002
uploded few models check it out guys
Okay. Seems GPS locking is a global issue.
@chaskarn - i agree with every word of @parmesh in his reply.
@vishalblr - there is not warranty or support from HCL for this Tab. But hey, who needs it.
There is no voice call support on this Tab. only SMS works along with GPRS/EDGE/3G.
I tried using the internet on GPRS, EDGE, 3G and Wifi and everything works perfect. I'm pretty much impressed with that.
You can install every thing on it after rooting. Android Market, Google Contacts, Google Calendar, Facebook, Google Maps, Google Talk.. etc which are compatible with the hardware and Andoird 2.2
For rooting the device, I used SuperOneClick v2.1.1 - ShortFuse. You can google for the instructions on rooting with this tool.
And about the games, I say every game works perfect. HomeBattle3D, CricketFever, other 3D games, Droidhen, etc etc..
I am very much satisfied with the Tab. I never felt a lag or force close on this device unnecessarily. I am trying to get Junos Pulse working on it. If any of you have become successful in connecting to VPN with it, please let me know.
Hi parameshwaran/sajavid
thanks a ton for your reply, i indeed order this tablet yesterday.
don't really care if i don't able to make voice calls but looks like this is disabled by manufaturer (same as ipad 2), should able to crack this.
also i am interested to upgrade OS of this device, looking at the hardware specification i think this device can be upgraded to gingerbread/honeycomb/iCS
if anyone able to upgrade it, please post here.
sajavid said:
Okay. Seems GPS locking is a global issue.
@chaskarn - i agree with every word of @parmesh in his reply.
@vishalblr - there is not warranty or support from HCL for this Tab. But hey, who needs it.
There is no voice call support on this Tab. only SMS works along with GPRS/EDGE/3G.
I tried using the internet on GPRS, EDGE, 3G and Wifi and everything works perfect. I'm pretty much impressed with that.
You can install every thing on it after rooting. Android Market, Google Contacts, Google Calendar, Facebook, Google Maps, Google Talk.. etc which are compatible with the hardware and Andoird 2.2
For rooting the device, I used SuperOneClick v2.1.1 - ShortFuse. You can google for the instructions on rooting with this tool.
And about the games, I say every game works perfect. HomeBattle3D, CricketFever, other 3D games, Droidhen, etc etc..
I am very much satisfied with the Tab. I never felt a lag or force close on this device unnecessarily. I am trying to get Junos Pulse working on it. If any of you have become successful in connecting to VPN with it, please let me know.
Click to expand...
Click to collapse
@sajavid HI.. check this link out...http://forum.xda-developers.com/showthread.php?t=874258
haaa my pad got crashed after doing factory reset.. its not turning up.... it says that loading recovery boot image and nothing happening
@ Sajavid - I have a few queries. First of all, Thanks for the info.
Did u try updating the OS? I think h/w has the capability to take on the higher versions...Is it possible with this tab after rooting? what other features r u using after rooting? What about GPS and blocked voice calls?
Also, please tell me what if something goes wrong during rooting, i mean is there any backup plan to counter such situation?
Thanks again for sharing ur experience!
@sajavid i recovered my ME with nvFlash and updated with Viewsonic g tablet files and its working now.. when booting up it showing viewsonic bird logo and g tablet logo... i just came from office and did this thing it took me around 15 minz to recover. Now I'm going to bed. ill post more on this today afternoon ...
here iis the link i followed after bricking my pad http://forum.xda-developers.com/showthread.php?t=861950
@ Parmesh: Seems ur HCL ME has become ViewSonic G Tablet now!! Awesome man!!
Now let us all know what all extra features u r able to use...my greed is of course GPS and voice calls... , and what abt OS?
Eager to know ur experience
Released today, these are flying off the shelves at Tesco.. Huge push for them from Tesco.. Built by Archos
RK3188 processor (i think)
Great spec and a very solid tablet.. I've bought two of them...
Specifications:
7" 1440 x 900 HD screen
Android Jellybean 4.2.2
16GB storage which can be expanded to 48GB with microSD cards.
1GB RAM
Quad-core 1.5GHZ processor
9 hours video battery life (Conditions may vary dependent on video format and content, audio volume, screen brightness and processor load)
Micro-HDMI port
Bluetooth 4.0, GPS
Dual band Wi-Fi for a more stable connection
Access to over a million apps via Google Play™
Comes in 4 colours: black, blue, red, purple
Wi-Fi only
Sleek, high-quality design, with a durable, matte, soft-touch back for better grip
Scratch resistant touch screen
'Getting started' app that offers tips and guidance
Can we have its own forum ? I think it will probably warrant it in a few weeks time..
jonoathome said:
Released today, these are flying off the shelves at Tesco.. Huge push for them from Tesco.. Built by Archos
RK3188 processor (i think)
Great spec and a very solid tablet.. I've bought two of them...
Specifications:
7" 1440 x 900 HD screen
Android Jellybean 4.2.2
16GB storage which can be expanded to 48GB with microSD cards.
1GB RAM
Quad-core 1.5GHZ processor
9 hours video battery life (Conditions may vary dependent on video format and content, audio volume, screen brightness and processor load)
Micro-HDMI port
Bluetooth 4.0, GPS
Dual band Wi-Fi for a more stable connection
Access to over a million apps via Google Play™
Comes in 4 colours: black, blue, red, purple
Wi-Fi only
Sleek, high-quality design, with a durable, matte, soft-touch back for better grip
Scratch resistant touch screen
'Getting started' app that offers tips and guidance
Can we have its own forum ? I think it will probably warrant it in a few weeks time..
Click to expand...
Click to collapse
This tablet has a 'T' icon on the lower left corner of the screen. I have no knowledge of Android but would it be possible to install a 'clean' version of Android to remove the Tesco link? If so, would it still recognise the GPS which is the primary reason for wanting this tablet ?
TIA Paul
Just bought one myself. Had a few HTC phones, tinkered with my first windows ROM (old version) with xda guides so have come looking for a guide to rooting. But not much when searching for hudl so my guess is to start there.
Sent from my Hudl HT7S3 using xda app-developers app
Modaco has a bit of activity in relation to these (including rooting guides) - have a look over there
Sent from my Nexus 5 using Tapatalk
matchworker said:
This tablet has a 'T' icon on the lower left corner of the screen. I have no knowledge of Android but would it be possible to install a 'clean' version of Android to remove the Tesco link? If so, would it still recognise the GPS which is the primary reason for wanting this tablet ?
TIA Paul
Click to expand...
Click to collapse
Pop over to Modaco and get the edited systemui. It has removed the T icon.
You can also find CWM there
How can I get into flash mode to install Robs custom Rom?
Thanks in anticipation
John
johnsiddle said:
How can I get into flash mode to install Robs custom Rom?
Thanks in anticipation
John
Click to expand...
Click to collapse
HI John,
I'm probably late to the party, but the instructions for flashing my custom ROM are linked from here: https://github.com/remay/tmf-hudl/wiki If you're still having problems with it then start a discussion here: https://github.com/remay/tmf-hudl/discussions
Rob.
TigerRob said:
HI John,
I'm probably late to the party, but the instructions for flashing my custom ROM are linked from here: https://github.com/remay/tmf-hudl/wiki If you're still having problems with it then start a discussion here: https://github.com/remay/tmf-hudl/discussions
Rob.
Click to expand...
Click to collapse
THanks Rob, I did find a link somewhere and managed to re-flash the tablet eventually, I think I got a bit confused over the instructions, but someone sorted me out.
Thank you for the info.
Take care and stay safe.
John
Hi,
In case anyone is looking for clear instructions on how to overcome the problem after a factory reset of the Tesco Hudl 1 & 2 you will find them here (works for Hudl 2 as well). Use a date between 27 June 2019 and 26 June 2020 :
HUDL bricked after factory reset and how to fix it - Hey Munky!
I did a factory reset on my HUDL and bricked it. Here's a quick step-by-step guide on how to unbrick it after a factory reset.
www.heymunky.co.uk
Or the same with pictures but remember to use a date between 27 June 2019 and 26 June 2020 :
Rob's stuff - Hudl - Fix
Update 23 May 2023: This mechanism for recovery of a factory reset Hudl 1 no longer works. Due to the Tesco server at https://device.tesco.mobile.com/ no longer responding correctly to requests this technique no longer works and will fail after Step 18. As far as I know my Custom ROM is now the
rob.themayfamily.me.uk
(If this date solution ever fails then another option is to create a new user in the settings menu and reboot into it.)
Post if it works for you
So a trail/game camera company has released this tablet little more detail right away just Google it and you can find it on their website
FEATURES:
Ideal for viewing and managing trail camera images and videos in the field
7" multi-touch screen
Built-in WiFi technology
Apps with social media capability
Android operating system
Dual-core processor
Easy, ready-to-use setup
Ultra-thin, heavy-duty design
Kryptek Highlander™ camo housing
8GB internal memory
SD/SDHC Card slot
Headphone jack
Micro USB port
Weather resistant
Model: VU100
Wildgame Innovations
SPECS:
Display: 7" color multi-touch (800 x 480 Resolution)
Audio Port: 3.5mm 10mW stereo out
Processor: 1.2 GHZ Dual Core
RAM: 1 GB
Internal Memory: 8 GB
Camera: 2MP rear camera
Operating System: Android 4.4
SD Card Slot: Standard SD/SDHC card slot (up to 32GB)
Power Supply: 5.0V/2A
Battery Life: 3-6 hours
What I'm wondering is who made it for them because I highly doubt they developed it on there own. Their web site says android 4.1 which is correct unless you buy it from dicks sporting goods they exclusively have (for now) the 4.4 version. I would really like to know how easy it would be to root this thing. I do a lot of hunting and it would be a great tool to have in the woods considering that it has the decoding software for the trail cameras android devices unfortunately cant do it on there own I've tried with my Rooted Verizon Samsung Galaxy Note II SCH-i605 and my old Rooted Samsung Stratosphere SCH-i405.
Please help with root ideas/info
Ive tried towelroot with no success and not finding any root build anywhere online. Does anyone have any ideas? I'm not a developer, so taking on the root programming on my own would be beyond me... Attached screengrab of kernel and build info.
Thx
Successful root
Hope this isn't too late of news for ya,
I successfully rooted my VU100 on 4.4.2 using Kingo Root. I tried using Root Genius but it got stuck on 64%. I stopped Root Genius in the middle of the root and restarted my tablet with no ill effects. Then I started Kingo Root and it succeeded no problem. I just followed the directions at http(colon)//devs-lab(dot)com/2015/06/root-any-android-device-in-single-click(dot)html
I also emailed Wildgame Innovations to see if they were able to give out any info as into different OS updates, so I'm still waiting to hear about that.
Hope this info is valuable to you,
Blake
EDIT:
I was playing around trying to figure out how to create a backup of the ROM and ended up having to redo the Kingo Root and this time instead of showing "VU100" as the device, it showed "86V_HD". I did a google search and found this.. http(colon)//www(dot)androiddevice(dot)info/submission/25358/show .
It seems to follow along with everything about the device and it looks like a guy by the name of Peter Guo made the custom ROM for WGI Innovations, atleast that is what I am gathering....
bootloop
Now my tablet is in a boot loop because I changed some things in build.prop and there is no CWM recovery for this tablet. Be careful if you decide to root your tablet.
Blake
Hello sorry if this out of line or off topic, novice here.
Can someone tell me how to have my podkicker storage moved and future downloads moved to my sd card. Got as far as storage options in app settings it states not recommended dont know what to do then which folders to click on do input, not seeing keyboatd
Hey guys,
I have not used the forums in a long time. My previous time I came here looking for help rooting my old Samsung Galaxy S3, and I was able to root.
This time however, I NEED to root my NeuTab 10.1.
I have tried searching xda without much luck, perhaps because is not a big name tablet.
The reason I said I NEED to do it its because some bloatware I am not able to remove (G-Sensor Calibration), it causes my internet browser to open 2-3 new windows with advertisements every-single-time I use the power button to bring my tablet out of stand-by mode.
Specification:
Google Android 5.1 (Lollipop)
10.1 inch multi-touch screen with 1024x600 resolution
A83T Octa-Core, ARM Cortex A7 @ up to 2.0GHz x8 Processor
1GB RAM, 16GB Storage
HD 2MP rear camera, 0.3 MP front camera
Mini HDMI
Bluetooth 4.0
- Thanks in advance for any help you can provide
PS- I was redirected to ask my question on this board, hope I am on the right place.
If any mods can delete my other post, here is the link
http://forum.xda-developers.com/general/xda-assist/neutab-10-1-rooted-please-help-t3413966
I have the 10.1 and it doesn't have that issue. Also it is running 6.01. you should check for updates.
dave
Kuilontli said:
Hey guys,
I have not used the forums in a long time. My previous time I came here looking for help rooting my old Samsung Galaxy S3, and I was able to root.
This time however, I NEED to root my NeuTab 10.1.
I have tried searching xda without much luck, perhaps because is not a big name tablet.
The reason I said I NEED to do it its because some bloatware I am not able to remove (G-Sensor Calibration), it causes my internet browser to open 2-3 new windows with advertisements every-single-time I use the power button to bring my tablet out of stand-by mode.
Specification:
Google Android 5.1 (Lollipop)
10.1 inch multi-touch screen with 1024x600 resolution
A83T Octa-Core, ARM Cortex A7 @ up to 2.0GHz x8 Processor
1GB RAM, 16GB Storage
HD 2MP rear camera, 0.3 MP front camera
Mini HDMI
Bluetooth 4.0
- Thanks in advance for any help you can provide
PS- I was redirected to ask my question on this board, hope I am on the right place.
If any mods can delete my other post, here is the link
http://forum.xda-developers.com/general/xda-assist/neutab-10-1-rooted-please-help-t3413966
Click to expand...
Click to collapse
Kuilontli said:
Hey guys,
The reason I said I NEED to do it its because some bloatware I am not able to remove (G-Sensor Calibration), it causes my internet browser to open 2-3 new windows with advertisements every-single-time I use the power button to bring my tablet out of stand-by mode.
Click to expand...
Click to collapse
)
Use Kingo Root PC Version. Fairly hard to download though, if you can, reports say you can use iRoot (formally known as vRoot) PC version. Also Try KingRoot AS A LAST RESORT