I've been (at least trying to) patiently wait for Deck to post full install instructions for CM10 but the CM10 op is still bare as bones. Has anyone else posted an install guide or instructions yet?
I'm currently rooted with RegawMod and running MeanRom 2.1 and it's really terribly laggy and frustrating, I can't wait any longer for CM10. Do I need S-off to install CM10 or do I just wipe, flash, and go?
Thanks for any help or links!
If you are on hboot 1.15 or higher you have to fast boot flash the kernel.
Other than that its just like a normal aosp install. Wipe flash rom flash gapps.
Its been my daily for 3 weeks.
Sent from my EVO using Tapatalk 2
You don't need s-off. You will however have to flash the boot IMG separately by using fastboot or the app flash image GUI and a full wipe is definitely required. There is a helpful thread in Q&A called "don't panic" that will answer all your questions
Good luck
Sent from my EVO using xda app-developers app
corcgaigh said:
You don't need s-off. You will however have to flash the boot IMG separately by using fastboot or the app flash image GUI and a full wipe is definitely required. There is a helpful thread in Q&A called "don't panic" that will answer all your questions
Good luck
Click to expand...
Click to collapse
Dont use flash image gui unless you know how to do it manually through fastboot. You are just asking for issues
Instructions:
http://androidforums.com/evo-4g-lte-all-things-root/606748-how-install-kernels-h-boot-1-15-a.html
Rxpert said:
If you are on hboot 1.15 or higher you have to fast boot flash the kernel.
Other than that its just like a normal aosp install. Wipe flash rom flash gapps.
Click to expand...
Click to collapse
I'm on hboot 1.12, so does that mean I can just flash normally?
edit - From what I can tell from reading, hboot 1.12 doesn't have the same restrictions that 1.15+ do, so I think I'm OK but I would like verification.
Thanks for the help everyone.
Yes hboot 1.12 allows for access to the boot partition
Also luuuuucckkyyyyyy...
EdhyMonker said:
I'm on hboot 1.12, so does that mean I can just flash normally?
edit - From what I can tell from reading, hboot 1.12 doesn't have the same restrictions that 1.15+ do, so I think I'm OK but I would like verification.
Thanks for the help everyone.
Click to expand...
Click to collapse
If you are on Hboot 1.12 I'd strongly suggest looking into getting S-OFF. Theres really no reason not to.
Up to you though, its not required
Bit off topic, anyone check to see if you can push a new splash, right now I'm too lazy to start my PC just to fastboot one measly splash
Rxpert said:
If you are on Hboot 1.12 I'd strongly suggest looking into getting S-OFF. Theres really no reason not to.
Up to you though, its not required
Click to expand...
Click to collapse
The S-OFF guide was way over my head so I just let it be. If there's not a real good reason for doing it, and I can still run CM10, then I'd rather not.
It allows you to directly flash new firmware like radios to fix any problems a device might be having. If you have Son and want the latest firmware you have to revert back to stock and accept ota, then unlock reflash recovery and reflash custom ROM or rooted stock, you could also just flash root installer if you want to just root stock
om4 said:
It allows you to directly flash new firmware like radios to fix any problems a device might be having. If you have Son and want the latest firmware you have to revert back to stock and accept ota, then unlock reflash recovery and reflash custom ROM or rooted stock, you could also just flash root installer if you want to just root stock
Click to expand...
Click to collapse
No, S-ON people with 1.12 H-boot can flash radios and firmware from recovery. They can do whatever they please in recovery just like S-OFF. S-OFF users can flash things from bootloader and even change the appearance of their h-boot to read S-ON and **locked** even though they are S-OFF
To the OP, this is the best rooting guide I've seen. It really explains everything step by step. http://androidforums.com/evo-4g-lte...panda-s-htc-dev-ltevo-root-dummies-guide.html Its recommended to have Linux at least bootable, because in the small chance the phone gets bricked... the unbricker program requires linux.
I ran it in windows before the unbricker was available, no issues here
You basically just hook the phone up to it and run the program like you do for most other root programs. All 1-click
Ah yeah forgot to mention that, most everyone is on 1.15 or 1.19 sorry
om4 said:
Ah yeah forgot to mention that, most everyone is on 1.15 or 1.19 sorry
Click to expand...
Click to collapse
Alright, I got S-Off using Lazy Panda and it went better than expected!
Do I need to flash updated firmware / radios separately from CM10, or does CM10 include latest firmware?
Sorry to ask dumb questions, but I do hope this thread will also be a good resource for others like me.
You don't have to flash any firmware updates. There are a few users with issues although they may be related to the ROM update and not necessarily the firmware included. I haven't really checked since I'm s on. If you want to update the radios there's an update zip here somewhere, be sure to read through everything carefully. Radios are more risky then every day flashing
Alright everyone now I need some help!
I flashed CM10 after s-off, was on stocked 1.13 rooted rom.
Now when CM10 boots up I am faced with a phone activation screen. It says something like "you will not be able to place calls or access the mobile network until the device is activated". I am unable to make calls or receive calls or access the internet. I have tried reflashing cm10 and the problem persists.
In the mean time, I will try flashing a nand backup and see where that gets me. I appreciate any and all help, and I have found no posts in the CM10 thread with a similar issue.
Update: I wiped and restored a back-up, MeanRom 2.1. Upon boot, hands-free activation ran and activated the phone and downloaded a PRL update. Everything is working fine now. Not sure if I should try CM10 again or what? Any advice?
EdhyMonker said:
Alright everyone now I need some help!
I flashed CM10 after s-off, was on stocked 1.13 rooted rom.
Now when CM10 boots up I am faced with a phone activation screen. It says something like "you will not be able to place calls or access the mobile network until the device is activated". I am unable to make calls or receive calls or access the internet. I have tried reflashing cm10 and the problem persists.
In the mean time, I will try flashing a nand backup and see where that gets me. I appreciate any and all help, and I have found no posts in the CM10 thread with a similar issue.
Update: I wiped and restored a back-up, MeanRom 2.1. Upon boot, hands-free activation ran and activated the phone and downloaded a PRL update. Everything is working fine now. Not sure if I should try CM10 again or what? Any advice?
Click to expand...
Click to collapse
ive only ever seen this issue with cyanogenmod and the old htc vogues, still great phones for what they were
EdhyMonker said:
Alright, I got S-Off using Lazy Panda and it went better than expected!
Do I need to flash updated firmware / radios separately from CM10, or does CM10 include latest firmware?
Sorry to ask dumb questions, but I do hope this thread will also be a good resource for others like me.
Click to expand...
Click to collapse
Yes, you should be flashing the upgraded firmware. You'll see the full firmware as the very first downloadable link. Flash that
http://themikmik.com/showthread.php...dio-Collection&p=220556&viewfull=1#post220556
Rename the file to "PJ75IMG.zip", place on root of SD card, and boot into HBOOT to flash. Check the md5 to make sure its right. With radios you want to make sure its the correct file.
Welcome to S-OFF my friend
Rxpert said:
Yes, you should be flashing the upgraded firmware. You'll see the full firmware as the very first downloadable link. Flash that
http://themikmik.com/showthread.php...dio-Collection&p=220556&viewfull=1#post220556
Rename the file to "PJ75IMG.zip", place on root of SD card, and boot into HBOOT to flash. Check the md5 to make sure its right. With radios you want to make sure its the correct file.
Welcome to S-OFF my friend
Click to expand...
Click to collapse
Thanks, but I tried this and it says "no image or wrong image" when trying to flash the PJ75IMG.zip file.
Did you type in PJ75IMG.zip or PJ75IMG and kept it a zip file...you should do the 2nd.
joebarkho said:
Did you type in PJ75IMG.zip or PJ75IMG and kept it a zip file...you should do the 2nd.
Click to expand...
Click to collapse
I thought that might've been the issue so I tried it both ways, didn't work either way. I'll take another shot at it tomorrow.
Related
First time flashing. Unlocked using HTC method, thought I backed up my rom using rom manager, went and flashed to Cyanogenmod 9. Didn't like it, wanted to go back to stock, but can't find the back up. Now my radio doesn't work, can't figure out which version of stock rom I need to flash either. Any help appreciated.
with htc unlock root, you need to flash roms by booting to recovery through fastboot, there are other options, but this one works 100% of the time.
Well yeah, I did that, but how to I get a stock rom back on so my phone will work? I can't connect to the mobile network now. How do I know which stock rom to download? I guess I don't understand how to tell I'm getting the right rom.
U want the latest ruu it will update everything.. dunno how u flash cause I'm s off
Ps in the future please post questions in q&a and not* development thread
did it help? hit the button!
sent from a viper bitten alien
Thanks, and sorry for not posting in correct location. Guess I don't know how to flash the RUU without being in S-OFF.
Check the stickies, there's a link to stock rooted ROMs in there somewhere. I'd link it, but I'm in a crappy area and it takes ages to load a thread.
On the other hand, why not just pick a ROM that's not in alpha and actually has most features working?
Sent from my HTC EVO 3D using Tapatalk
mushroom_cult said:
Check the stickies, there's a link to stock rooted
On the other hand, why not just pick a ROM that's not in alpha and actually has most features working?
Sent from my HTC EVO 3D using Tapatalk
Click to expand...
Click to collapse
True, I'll have to take a look at the other roms
Use team wins HTC unlock flashing tool its on rootzwiki
Sent from my MB855 using xda premium
You would want to boot into the bootloader, relock it and DL the RUU found in this LINK. Once downloaded, run the RUU.exe file on your pc while your phone is in the bootloader. It will flash your phone with the stock 2.17 update. When you are completed, boot back into bootloader and unlock your phone again using the HTC Unlock method. From there, you can flash any ROM with a 2.17 base and should be fine, but remember do a backup and to wipe first.
Thanks doeboy711!
I'm not too impressed with TWRP2 as it wasn't completely wiping things when it should have been so I recommend the older TWRP 1.1 (recovery). Also since you have hboot 1.5 you'll probably find Flash Image GUI a little easier to use for flashing kernels. If you didn't flash the right kernel that might be why your radio is not working. You can find flash image gui Here. It's pretty self explanatory. Before you flash a new rom, open Flash image gui, select kernel, browse to the rom. Let it do it's thing and when it prompts you to reboot to recovery, flash your rom like normal.
Actually, do I want to flash the RUU since it's still S-ON?
Do you have a HBoot 1.5? If so, that is the only way to upgrade to the new 2.17 base, which is the base of all the new ROM's. Just ensure that you lock the bootloader before you run the RUU or it will fail. It won't brick your device, but you will have to run it twice, learned the hard way here lol. Just pull your battery and boot into bootloader, lock it and then run the RUU if you did run it while it was unlocked still.
If you have a lower Hboot and can gain S-off, then no, don't run the RUU. You should be able to get S-off and flash anything you want at anytime.
Not sure how I'm supposed to get the RUU without a premium account at filefactory
Which hboot are you on? 1.4 or 1.5?
Sorry, hboot 1.50
DrkNvmbr81 said:
Not sure how I'm supposed to get the RUU without a premium account at filefactory
Click to expand...
Click to collapse
Post 55 had another DL for it but I saved you the time to try and find it and here it IS.
doeboy711, you are awesome. Thanks for the help, I'm gonna try it right now.
Do I backup and wipe before I flash this RUU?
DrkNvmbr81 said:
doeboy711, you are awesome. Thanks for the help, I'm gonna try it right now.
Do I backup and wipe before I flash this RUU?
Click to expand...
Click to collapse
Well you will loose everything once you run the RUU, so if you want to back up apps it's up to you. The RUU will wipe everything for you though, so don't worry about that.
I've got it back to normal. Thanks for your help.
I have an HTC EVO 3D That I purchased yesterday, and It's been flashed to Boost Mobile (A company owned and operated by Sprint) Boost is a CDMA service. I am interested in rooting my device, but when I tried this method: http://forum.xda-developers.com/showthread.php?t=1218193 I was stopped because my HBOOT isn't supported. Baffled, I went searching the forums and found this:http://forum.xda-developers.com/showthread.php?t=1547695 unfortunately, I'm not sure if it's safe to proceed with this procedure, because I wasn't there when my phone was flashed, and I don't know if HTC Dev was used. Furthermore, I don;t know if I have S-On of S-OFF, because I didn't flash my phone. Also, it has come to my understanding that linux is required for that method of HBOOT downgrade. Is there any way I can avoid that? It's kind of a lot of trouble.
You can check if you're s-on or s-off by looking at the top of the hboot screen. Pull the batt, put it back in, hold vol down + power.
If you don't have s-off, the downgrade is easy, linux is easy. After the downgrade you have to use revolutionary.io to achieve s-off and it'll likely screw up your boost flash. I'll edit with a thread link for prepping to downgrade with a carrier flashed phone.
Edit... http://forum.xda-developers.com/showthread.php?t=1646815
wikdNoob said:
You can check if you're s-on or s-off by looking at the top of the hboot screen. Pull the batt, put it back in, hold vol down + power.
If you don't have s-off, the downgrade is easy, linux is easy. After the downgrade you have to use revolutionary.io to achieve s-off and it'll likely screw up your boost flash. I'll edit with a thread link for prepping to downgrade with a carrier flashed phone.
Click to expand...
Click to collapse
Hboot says I have S-ON. By following the steps in that link you'll give, will I be able to restore my flash without losing MMS and 3G, etc.?
I'm really not sure, I've never flashed a phone. If you don't mind me asking, why do you want s-off? It's nice to have because it makes flashing roms easier but its not required to flash roms, and if your not sure you can flash your phone back, its probably not worth the risk.
wikdNoob said:
I'm really not sure, I've never flashed a phone. If you don't mind me asking, why do you want s-off? It's nice to have because it makes flashing roms easier but its not required to flash roms, and if your not sure you can flash your phone back, its probably not worth the risk.
Click to expand...
Click to collapse
Well the whole idea is that i need to downgrade HBOOT in order to root, and I was under the impression that to downgrade Hboot i needed to have S-OFF.
No, you just need to unlock at htcdev. Then you can root, give me a sec and ill give you another link. Once you think you can flash your phone to boost, I suggest getting s-off. Just less issues with s-off flashing.
Edit... A lot of guides out there, check the roll up sticky thread. This one will probably work. http://forum.xda-developers.com/showthread.php?t=1239821
wikdNoob said:
No, you just need to unlock at htcdev. Then you can root, give me a sec and ill give you another link. Once you think you can flash your phone to boost, I suggest getting s-off. Just less issues with s-off flashing.
Edit... A lot of guides out there, check the roll up sticky thread. This one will probably work. http://forum.xda-developers.com/showthread.php?t=1239821
Click to expand...
Click to collapse
THank man, i wish i could click thanks a thousand times. I'll try this method and see what i get.
Any time.. btw, you might be able to do the wire trick to get s-off without messing up the flash. It's in the dev section, called something like junoputabear s-off. Ask in that thread, maybe someone will know.
wikdNoob said:
Any time.. btw, you might be able to do the wire trick to get s-off without messing up the flash. It's in the dev section, called something like junoputabear s-off. Ask in that thread, maybe someone will know.
Click to expand...
Click to collapse
I got root, and recovery but for some reason the fastboot method wher you extrtact the boot.img and use fastboot to load recovery doesn't work for ICS roms, they bootloop. I found a working Gingerbread rom and I like it. Only issue is i wanted an ICS app. Btw, which gapps should I flash for 2.3.4?
_xNova said:
I got root, and recovery but for some reason the fastboot method wher you extrtact the boot.img and use fastboot to load recovery doesn't work for ICS roms, they bootloop. I found a working Gingerbread rom and I like it. Only issue is i wanted an ICS app.
Click to expand...
Click to collapse
From what I remember, if you boot a recovery from fastboot (fastboot boot recovery.img), you wouldn't need to extract any boot image. When you boot a recovery from fastboot, you'll be able to write to the boot partition, so all you need to do is flash the rom and it should work. With that said, I've read a lot of times that flashing ics roms with s-on will cause bootloops. I've never seen that personally, I was s-off before ics came along.
Btw, which gapps should I flash for 2.3.4?
Click to expand...
Click to collapse
You probably know this but ill say it just incase. You only flash gapps on aosp roms. I think all the ics gapps say ics in the name, and most of the time gapps for any rom are linked in the same thread as the rom.
Look at your pm in a little bit. I'm gonna send you some stuff that'll help you figure out how to correctly flash a phone so that you can s-off without worry. I can't really post it here.
Edit... Sent
I don't want to be giving my friend the wrong information. When his sprint 3d was boot 1.5 I took it and soff it for him downgrading to 1.4. Now recently he upgraded to hboot 1.58 and it says relocked at the top. Of course he still has recovery and still is rooted.
My question is since his phone is soff can't he just still flash whatever with no issues? Does he have to do dev unlock again?
I own a rezound and have had many HTC devices and soff has always been the key to everything for me. Any help would be appreciated
With s-off there's no need to unlock his boot loader again. (For example) If he wants to flash an aosp rom, all he's gotta do is downgrade his hboot via boot loader.
Perfect. Already installed JP bear latest hboot and went to twrp. Making a backup now. That's what I was thinking but I wanted some confirmation. Its been a while since I messed with an Evo 3d
Hmmm. It won't flash paranoid android. Even tried the 1.04 eng hboot. Any ideas? Using twrp recovery. Latest radios and 1.04 eng hboot.
stkiswr said:
Hmmm. It won't flash paranoid android. Even tried the 1.04 eng hboot. Any ideas? Using twrp recovery. Latest radios and 1.04 eng hboot.
Click to expand...
Click to collapse
A lot of people have had better luck with 4EXT on the Evo 3D. You can download the Recovery Updater for free from the www.4ext.net website and install the current version of 4EXT Recovery from that app. Then "format all partitions except SD card" in the wipe/format menu of the recovery, and try flashing PA again.
ramjet73
ramjet73 said:
A lot of people have had better luck with 4EXT on the Evo 3D. You can download the Recovery Updater for free from the www.4ext.net website and install the current version of 4EXT Recovery from that app. Then "format all partitions except SD card" in the wipe/format menu of the recovery, and try flashing PA again.
ramjet73
Click to expand...
Click to collapse
K. I'm working on that now. I let you know soon its backing up now. Thank you for the heads up. Do you think I should go back yo the latest jbear hboot? Or just leave the 1.04 eng hboot? He wants to be able to run these jellybean builds that are out
stkiswr said:
K. I'm working on that now. I let you know soon its backing up now. Thank you for the heads up. Do you think I should go back yo the latest jbear hboot? Or just leave the 1.04 eng hboot? He wants to be able to run these jellybean builds that are out
Click to expand...
Click to collapse
Stay with the ENG 1.04 hboot for now. The GB and AOSP based ROM's won't boot with the latest JBear (1.58.5858) so if you want to use a JBear version 1.50.5050 is better.
ramjet73
ramjet73 said:
Stay with the ENG 1.04 hboot for now. The GB and AOSP based ROM's won't boot with the latest JBear (1.58.5858) so if you want to use a JBear version 1.50.5050 is better.
ramjet73
Click to expand...
Click to collapse
Wow thank you for all the help. I just did everything and unfortunately it is just stuck in a never ending splash loop. Doesn't seem like the kernel/boot is being flashed. Made a backup so I should be good. Just sucks doing all the steps and being stuck.
What kernel are you flashing with pa?
Jsparta26 said:
What kernel are you flashing with pa?
Click to expand...
Click to collapse
It doesn't come with a kernel?
stkiswr said:
Wow thank you for all the help. I just did everything and unfortunately it is just stuck in a never ending splash loop. Doesn't seem like the kernel/boot is being flashed. Made a backup so I should be good. Just sucks doing all the steps and being stuck.
Click to expand...
Click to collapse
Are you doing the "format all partitions except SD card" in 4EXT right before flashing the ROM? Make sure to give it plenty of time to boot since sometimes the first boot can take up to 10 minutes.
ramjet73
stkiswr said:
It doesn't come with a kernel?
Click to expand...
Click to collapse
Well go with ramjets suggestion and try format all partitions minus sdcard along with full factory data wipe and cache/dalvik wipe and see if it boots up all the way.( it couldn't hurt to do all the wipes two or three times before you flash the rom). Just to make sure everything was wiped all the way.
Oh yeah. Step by step . It just never gets past splash. I looked into the ROM downloaded and saw a boot IMG but it really seems like a boot issue. Doesn't make a lot of sense to me. Soff, everything in right place, correct recovery and no boot. Not complaining, he still has his backup he is running and it restores backup correctly.
His phone was soff and he upgraded firmware to the 1.58 so it said locked in hboot. I just flashed 3 dif bootloader with no issues. Its def soff.
Ok, try flashing a different kernel. Try the Mac kernel that's located in Mazda's aokp jb thread. I believe buttered toast came with pa that your trying to flash. It could also be a bad download as well. You could always redownload the rom as well to see if that works. You never know about these things sometimes.
stkiswr said:
Oh yeah. Step by step . It just never gets past splash. I looked into the ROM downloaded and saw a boot IMG but it really seems like a boot issue. Doesn't make a lot of sense to me. Soff, everything in right place, correct recovery and no boot. Not complaining, he still has his backup he is running and it restores backup correctly.
His phone was soff and he upgraded firmware to the 1.58 so it said locked in hboot. I just flashed 3 dif bootloader with no issues. Its def soff.
Click to expand...
Click to collapse
You've tried all the standard stuff to get AOSP ROM's to boot on the Evo 3D. At this point I can only suggest that you flash the 2.89.651.2 SPrint ICS RUU from here, then reflash a custom bootloader and recovery. That will make sure everything is in sync and has cleared up this problem for other users.
You don't need to relock the bootloader (although I think you said it is already relocked) when flashing the RUU if the phone is S-OFF.
ramjet73
Yes, I will try to download ROM again and also grab that kernel.
I soff this phone for him when it was hboot 1.50. Then I reverted to 1.40 via brick method to get it soff. He has ran some form of an hboot/radios update because he was told to do that. Now we are working together and I am trying to fix all his stuff and get him setup correctly. I have an soff rezound and am sure his phone isn't seeing the boot.IMG.
Now today his phone said locked or relocked am not sure. I went ahead an changed his hboot to a recommended 1.04eng hboot. Installed 4ext recovery via the app that was linked. I am downloading gangam style cm10 to test just to see if something will boot. It successfully flashed a sense based ROM and booted fine thru an aroma installer that came with the ROM. In the installer I stated it was soff and had no issues. I will try the ROM and it doesn't boot I will jump back to recovery and flash a kernel and see. Thanks very much for all the help
Well, I have done it all. Not much more I can do. He may try to run the ICS ruu later but I just can't get any cm10 jb based ROM to boot. Y'all have been more than helpful catching me back up to speed on the 3d and while I agree this should be flashing alas it is not booting. I am positive its just not accepting the boot img for what ever reason because it never makes it far enough after reboot from recovery. Just endless quick splash screen reboots.
No problem. I just wanted to add that a lot of users are having weird issues with paranoid android. ( I'm subscribed to the thread) so it could be that your phone doesn't like pa for some reason. ( Not a diss on Lens Flare at All) but he's been having some issues with the rom and is more than likely trying to work on it. Hopefully you can get gangnam style up and running or even aokp jb. If none of these work, I would go with ramjets suggestion and run a ruu and then back to Asop.
Edit: guess you already tried them. Hopefully you get some better luck after you try the ruu method. Good luck.
Hey guys i gota semi bricked EVO LTE on the 3.16 SW i was wondering if anyone can help me fix. I tried to root it and thats what caused this issue. I did the bootloader unlocked, loaded TWRP recovery, then installed SU, then it wouldn't turn on, would only flash to sprint screen.
I have tried to to a full wipe / factory - didn't work
i have tried to load the 3.15 RUU - does not work (it just shows loading the rom forever)
i have tried to load it through fastboot via Ulimited.IO (it just freezes during the loading of the SW)
what else can i try? I seems like everytime the phone tries to take a ROM it will just not respond.
thanks
OK your on the latest firmware I think 3.16 and if your s-on that means you have the new touch panel driver which limits what ROMs will work on your device.
You need to download a ROM with a s-on installer included or pull the boot IMG from the ROM and flash via fast boot because you can't flash kernels easily when your S-ON .You also will need a rom that's compatible with the latest fw. AFAIK most of the sense ROMs will be good to go, I really don't know which ones cause I'm s-off and don't have the tp driver problem.
If you need more info there's s thread stickied in Q&A called "don't panic" that will answer most of questions
Once your up and running you should go about getting S-Off.
SENT FROM MY LTEVO
corcgaigh said:
OK your on the latest firmware I think 3.16 and if your s-on that means you have the new touch panel driver which limits what ROMs will work on your device.
You need to download a ROM with a s-on installer included or pull the boot IMG from the ROM and flash via fast boot because you can't flash kernels easily when your S-ON .You also will need a rom that's compatible with the latest fw. AFAIK most of the sense ROMs will be good to go, I really don't know which ones cause I'm s-off and don't have the tp driver problem.
If you need more info there's s thread stickied in Q&A called "don't panic" that will answer most of questions
Once your up and running you should go about getting S-Off.
SENT FROM MY LTEVO
Click to expand...
Click to collapse
thanks for the info. So i need to get a rom with s-on installer and flash it via fastboot flash zip xxxxxx.zip? But i'm not even sure if i'm rooted. I did install the SU in there, it said okay, but now i cant access the recovery. only fastboot. would this damage the phone in anyways?
thanks
right now its showing
**tampered***
** relocked **
** security warning**
Jewel PVT SHIP S-ON RL
HBOOT - 2.09
RADIO - 1.12.11.1210
OpenDSP - V31.1.0.45.0815
emmc- Boot
oct 18 2012
I just tried to flash MeanBean v309 on it via fastboot and it didn't work? is it because the file is too big? I am pretty sure the bean mean is a S-on ROM
Looks like u need to unlock again. Use the same command as the last time
"Fast boot OEM unlock" or whatever it is. Flash twrp recovery thru fast boot. Once you have twrp installed flash a rooted ROM to gain root.
SENT FROM MY LTEVO
corcgaigh said:
Looks like u need to unlock again. Use the same command as the last time
"Fast boot OEM unlock" or whatever it is. Flash twrp recovery thru fast boot. Once you have twrp installed flash a rooted ROM to gain root.
SENT FROM MY LTEVO
Click to expand...
Click to collapse
took your advice, re-unlocked it and installed TWRP recovery on it, and now i get recovery, but i cant use it because the touch screen does not work so i'm in the process of trying to find a CMW recovery instead and try to install a newer rom.
truwrxtacy said:
took your advice, re-unlocked it and installed TWRP recovery on it, and now i get recovery, but i cant use it because the touch screen does not work so i'm in the process of trying to find a CMW recovery instead and try to install a newer rom.
Click to expand...
Click to collapse
Do not use CMW. It was abandoned a long time ago for our phones. Something about it screwing up partitions. Install a new version of TWRP. 2.4 or higher. And Venom rom has an s-on installer for sure. Other roms might have one but I'm not sure which ones. Stay away from CMW.
The s-on installer is just an installer added to the ROM zip so that you don't have to flash the boot.img seperately. Just get a working version of TWRP and flash Venom (or other s-on friendly rom). That should work.
tilltheend714 said:
Do not use CMW. It was abandoned a long time ago for our phones. Something about it screwing up partitions. Install a new version of TWRP. 2.4 or higher. And Venom rom has an s-on installer for sure. Other roms might have one but I'm not sure which ones. Stay away from CMW.
Click to expand...
Click to collapse
ahh okay thanks, i'll give it a shot and report back.
truwrxtacy said:
ahh okay thanks, i'll give it a shot and report back.
Click to expand...
Click to collapse
thanks guys so i got it working! i appreciate everyones help! I ended up loading a new TWRP recovery, and loading the new Meanbean and it works now.
I have one last question, does this mean i can only install roms compatible with 3.16 now? The only reason i went through all of this was because i wanted ICS on it. The new JB diag drivers dont work, and the only way i can make the diag drivers work is to downgrade to ICS. If i try to downgrade will i mess it up again?
thanks
truwrxtacy said:
thanks guys so i got it working! i appreciate everyones help! I ended up loading a new TWRP recovery, and loading the new Meanbean and it works now.
I have one last question, does this mean i can only install roms compatible with 3.16 now? The only reason i went through all of this was because i wanted ICS on it. The new JB diag drivers dont work, and the only way i can make the diag drivers work is to downgrade to ICS. If i try to downgrade will i mess it up again?
thanks
Click to expand...
Click to collapse
Yes, you are stuck on 3.16 roms. Anything below and your touchscreen won't work. I highly recommend going for s-off. Makes everything so much easier. The only other option is to use babyracun from unlimited.io then ruu to 3.15. But if you're doing that you might as well go for s-off.
tilltheend714 said:
Yes, you are stuck on 3.16 roms. Anything below and your touchscreen won't work. I highly recommend going for s-off. Makes everything so much easier. The only other option is to use babyracun from unlimited.io then ruu to 3.15. But if you're doing that you might as well go for s-off.
Click to expand...
Click to collapse
Agreed. I did babyracun and then Facepalm afterwards. Worked great on Windows 7 64bit of which isn't supported by the developers, of course
Delakit said:
Agreed. I did babyracun and then Facepalm afterwards. Worked great on Windows 7 64bit of which isn't supported by the developers, of course
Click to expand...
Click to collapse
Which is what this guy should do since he doesn't have ubuntu and probably doesn't want to use a live disc.
thanks alot guys, i was not aware of the babyracoon. I'll give that a shot.
thanks
i have a question about baby racoon, as it does not have a separate thing for it.
So do i download baby racoon and run all the adb commands, and then run face palm, then ruu?
or do i download baby racoon and run all the adb commands, and ruu then face palm?
sorry i'm a noob
truwrxtacy said:
thanks alot guys, i was not aware of the babyracoon. I'll give that a shot.
thanks
i have a question about baby racoon, as it does not have a separate thing for it.
So do i download baby racoon and run all the adb commands, and then run face palm, then ruu?
or do i download baby racoon and run all the adb commands, and ruu then face palm?
sorry i'm a noob
Click to expand...
Click to collapse
Do steps 6-9 on unlimited io. That will leave your phone at stock 3.15. Then go and find out what facepalm requires and continue with that.
So I'm currently on Flyhalf's CM10.1 (S-ON), and I checked the recommended firmware/radios for the ROM and realized I'm outdated. It calls for Hboot 2.26 and radio 2.23.10.0123r, 2.23.10.0124r. but I'm on 2.25 and 1.22.10.0421r/1.22.10.0424r. I just updated to the latest version of the rom and I keep getting random bootlooping as well as the rom being way more unstable than the previous build I was on for about 4 months.
So, I'm trying to use Wildhorse's guide to updating firmware through RUU in hopes that it will solve my problems and it just plain isn't working. I've put the RUU in my external SD as PH98IMG, waited for my battery to charge to 90%, shut off the phone, pulled the battery, then gone into Hboot to flash it but I keep getting "No Image or Wrong Image" and it just goes back to the main Hboot screen every single time. Can anyone explain to me why this is happening even though I'm following everybody's directions exactly? I've been searching through the forums for about 2 hours now and I can't get an answer.
I'm still kind of new to HTC devices and how they work, so if anyone could help me figure this out I'd be very thankful.
BrahManty said:
So I'm currently on Flyhalf's CM10.1 (S-ON), and I checked the recommended firmware/radios for the ROM and realized I'm outdated. It calls for Hboot 2.26 and radio 2.23.10.0123r, 2.23.10.0124r. but I'm on 2.25 and 1.22.10.0421r/1.22.10.0424r. I just updated to the latest version of the rom and I keep getting random bootlooping as well as the rom being way more unstable than the previous build I was on for about 4 months.
So, I'm trying to use Wildhorse's guide to updating firmware through RUU in hopes that it will solve my problems and it just plain isn't working. I've put the RUU in my external SD as PH98IMG, waited for my battery to charge to 90%, shut off the phone, pulled the battery, then gone into Hboot to flash it but I keep getting "No Image or Wrong Image" and it just goes back to the main Hboot screen every single time. Can anyone explain to me why this is happening even though I'm following everybody's directions exactly? I've been searching through the forums for about 2 hours now and I can't get an answer.
I'm still kind of new to HTC devices and how they work, so if anyone could help me figure this out I'd be very thankful.
Click to expand...
Click to collapse
You are on a leaked firmware, the currently available RUUs are all older than that, and you can't go back when you are S-ON. You need to S-OFF then you can RUU back to 3.14.605.12 and then OTA back up to the current 4.5.605.14
acejavelin said:
You are on a leaked firmware, the currently available RUUs are all older than that, and you can't go back when you are S-ON. You need to S-OFF then you can RUU back to 3.14.605.12 and then OTA back up to the current 4.5.605.14
Click to expand...
Click to collapse
Okay, I was really hoping that wasn't the case. I hate to ask for more help, but I don't really understand how I'm supposed to get S-Off when I need to be on the stock RUU to do it, and I can't get on the stock RUU because I need to be S-Off to do so...
I hope I'm not stuck this way. Technically I'm on all the same software as I was yesterday, but now I'm getting random reboots all the time as well as bootloops that either go on for ten minutes or never end. I was on a build of CM10.1 from may with Amon Ra recovery, then tried to flash the newest TWRP that requires the new firmware (didn't realize I was on older firmware) and it bricked my phone. So I put on an older CWM recovery, tried to backup and it froze in the middle of every backup it tried to make. Put on an old TWRP, backups worked, so I flashed the newest version of CM10.1 (again not knowing I didn't have newest firmware) and that's when the bootlooping/rebooting started. I recovered to the old version of CM10.1 and the issue didn't go away, so now I'm just trying to figure out what I can do to get my phone in a usable state again.
BrahManty said:
Okay, I was really hoping that wasn't the case. I hate to ask for more help, but I don't really understand how I'm supposed to get S-Off when I need to be on the stock RUU to do it, and I can't get on the stock RUU because I need to be S-Off to do so...
I hope I'm not stuck this way. Technically I'm on all the same software as I was yesterday, but now I'm getting random reboots all the time as well as bootloops that either go on for ten minutes or never end. I was on a build of CM10.1 from may with Amon Ra recovery, then tried to flash the newest TWRP that requires the new firmware (didn't realize I was on older firmware) and it bricked my phone. So I put on an older CWM recovery, tried to backup and it froze in the middle of every backup it tried to make. Put on an old TWRP, backups worked, so I flashed the newest version of CM10.1 (again not knowing I didn't have newest firmware) and that's when the bootlooping/rebooting started. I recovered to the old version of CM10.1 and the issue didn't go away, so now I'm just trying to figure out what I can do to get my phone in a usable state again.
Click to expand...
Click to collapse
Hey, wait a sec... :laugh:
My bad, I just double checked, and with that Hboot/radio combination you are on stock ICS firmware already! Just RUU version 3.14.605.12, that should work without issues if done correctly and you should be back to pure ICS and can then allow the OTA to upgrade you in a few steps to 4.5.605.14
acejavelin said:
Hey, wait a sec... :laugh:
My bad, I just double checked, and with that Hboot/radio combination you are on stock ICS firmware already! Just RUU version 3.14.605.12, that should work without issues if done correctly and you should be back to pure ICS and can then allow the OTA to upgrade you in a few steps to 4.5.605.14
Click to expand...
Click to collapse
Oh, thank god. Hahah. I didn't remember ever flashing any leaked firmware before, so I was kind of confused there. I figured I may have done it somewhere in the unlocking/rooting process and just couldnt remember. Okay, thanks again for the help. RUU's have always confused me with the way they work. I should be stable in no time hopefully.
And now I'm having more issues... I can't use the Rom Updater because somethings wrong with my usb connection. I can plug it in and transfer files and such, but trying to use any ADB commands results in "Device not found" and the Rom Updater says it can't connect to my device either. My HTC Drivers are up to date, so I'm not sure why this is happening. Is there any way I can just get the PH98IMG.zip for 3.14.605.12 instead of having to use the RUU?
Not really sure what you are trying to run, I didn't think there was a 3.14.605.12 executable RUU, but use this page and instructions and grab the file: http://www.androidpolice.com/2012/0...cream-sandwich-ruu-for-final-ota-3-14-605-12/
Remember you will need to RELOCK the bootloader if I am not mistaken it is possible to hard brick if you don't!
Then copy to external SD card, name the file PH98IMG.zip (beware of the Windows "double zip" issue), verify MD5 on the SDcard, then reboot into hboot and go. Do it twice!!! Let it boot up and sit for about 10 minutes to calm down, then remove the PH98IMG.zip file from the SD card. Everything should be smooth sailing from there...
You should then be S-ON, completely stock. You will need to unlock again to do anything more
acejavelin said:
Not really sure what you are trying to run, I didn't think there was a 3.14.605.12 executable RUU, but use this page and instructions and grab the file: http://www.androidpolice.com/2012/0...cream-sandwich-ruu-for-final-ota-3-14-605-12/
Remember you will need to RELOCK the bootloader if I am not mistaken it is possible to hard brick if you don't!
Then copy to external SD card, name the file PH98IMG.zip (beware of the Windows "double zip" issue), verify MD5 on the SDcard, then reboot into hboot and go. Do it twice!!! Let it boot up and sit for about 10 minutes to calm down, then remove the PH98IMG.zip file from the SD card. Everything should be smooth sailing from there...
You should then be S-ON, completely stock. You will need to unlock again to do anything more
Click to expand...
Click to collapse
Strange, re-locking the bootloader was all I needed to get the RUU to update in my bootloader. No one else said to do that in any of the instructions, but I did it and immediately it started updating with the PH98IMG that I was originally trying to flash (from here: http://forum.xda-developers.com/showpost.php?p=38527788&postcount=745&nocache=1&z=1965375486761331).
I'm back to stock now, but firmware is 4.03.605.2, not 4.03.605.14. Is that going to be an issue or can I go right ahead with re-unlocking the bootloader and flashing recovery/roms?
BrahManty said:
Strange, re-locking the bootloader was all I needed to get the RUU to update in my bootloader. No one else said to do that in any of the instructions, but I did it and immediately it started updating with the PH98IMG that I was originally trying to flash (from here: http://forum.xda-developers.com/showpost.php?p=38527788&postcount=745&nocache=1&z=1965375486761331).
I'm back to stock now, but firmware is 4.03.605.2, not 4.03.605.14. Is that going to be an issue or can I go right ahead with re-unlocking the bootloader and flashing recovery/roms?
Click to expand...
Click to collapse
Well, I have some good news and bad news...
Bad news is you are now on a leaked firmware and will have to S-OFF to go up or down in versions unless a full RUU is released for the current OTA of 4.5.605.14...
Good news is you are the global leak, and you can use the JuopunutBear S-OFF exploit from http://unlimited.io/index.htm just as if you were on the original ICS release. Also, you can S-OFF and use most ROMs and recoveries as you are now on a global mode firmware.
acejavelin said:
Well, I have some good news and bad news...
Bad news is you are now on a leaked firmware and will have to S-OFF to go up or down in versions unless a full RUU is released for the current OTA of 4.5.605.14...
Good news is you are the global leak, and you can use the JuopunutBear S-OFF exploit from http://unlimited.io/index.htm just as if you were on the original ICS release. Also, you can S-OFF and use most ROMs and recoveries as you are now on a global mode firmware.
Click to expand...
Click to collapse
Lol, all right, I would have tried to get the right firmware on there but my phone got so buggy that it wouldn't even boot into the rom anymore. So I couldn't get it on the SD card and I had to make do with what I had on there. At this point, I'm just glad the phone is usable again and I might leave it stock for a while. Thank you so much for all your help, I couldn't have figured this out without you!
BrahManty said:
Lol, all right, I would have tried to get the right firmware on there but my phone got so buggy that it wouldn't even boot into the rom anymore. So I couldn't get it on the SD card and I had to make do with what I had on there. At this point, I'm just glad the phone is usable again and I might leave it stock for a while. Thank you so much for all your help, I couldn't have figured this out without you!
Click to expand...
Click to collapse
Cool, glad you got it working.
That firmware is actually pretty decent and rock solid stable, you shouldn't have any more software related issues... Plus you can root/ROM like normal from that version, the radios may be slightler lower than most recommended versions, but they should work fine. If you do decide to go the ROM route again, I would suggest going S-OFF before starting, it will just make it easier in the long run.
Hey, just wanted to ask some questions as a follow-up since this seems to be the most relevant (and active) thread to my issue:
Long story short, got a new (to me) Rezound. It was running CM10, from the forthnightly thread. New SIM card from Verizon and I was getting data, but the no mobile network found error. After reading the threads I could find on the error, went with the suggestion of a wipe and so I did. A few too many beers while reading thru the forums, and I did the wipe a bit too thoroughly. Now I have a no OS found, and instead of thinking I know what I'm doing I'd like to ask to make sure I understand this correctly.
Currently, the phone is S-OFF, with TWRP 2.5.0.0. It's saying I'm not rooted, but then again no OS to be rooted. The dump from my bootloader is as follows:
*** TAMPERED ***
*** LOCKED ***
VIGOR PVT SHIP S-OFF RL
HBOOT-2.28.0000
RADIO-2.23.10.0123r/2.23.10.0124r
OpenDSP-v14.6.0.7708.00.0507
eMMC-boot
Sep 20 2012, 17:40:22
Click to expand...
Click to collapse
After checking this thread and this one here it looks like the following applies:
* I can just run the regular RUU (executable) to load a stock image without having to revert back to S-ON first.
* I will have to re-unlock the bootloader thru htcdev after RUUing
* I'll need to reinstall TWRP
Is this right? Am I missing anything?
JoeKamel said:
Hey, just wanted to ask some questions as a follow-up since this seems to be the most relevant (and active) thread to my issue:
Long story short, got a new (to me) Rezound. It was running CM10, from the forthnightly thread. New SIM card from Verizon and I was getting data, but the no mobile network found error. After reading the threads I could find on the error, went with the suggestion of a wipe and so I did. A few too many beers while reading thru the forums, and I did the wipe a bit too thoroughly. Now I have a no OS found, and instead of thinking I know what I'm doing I'd like to ask to make sure I understand this correctly.
Currently, the phone is S-OFF, with TWRP 2.5.0.0. It's saying I'm not rooted, but then again no OS to be rooted. The dump from my bootloader is as follows:
After checking this thread and this one here it looks like the following applies:
* I can just run the regular RUU (executable) to load a stock image without having to revert back to S-ON first.
* I will have to re-unlock the bootloader thru htcdev after RUUing
* I'll need to reinstall TWRP
Is this right? Am I missing anything?
Click to expand...
Click to collapse
You should be able to just boot into twrp and flash a rom
Sent from my ADR6425LVW using xda premium
izzaeroth said:
You should be able to just boot into twrp and flash a rom
Click to expand...
Click to collapse
Okay, that's good to know. For now though, if I just wanted to get my phone working, make sure there's not a SIM issue and such I could go back to a stock image without worrying? I just would rather do a lot more reading and make sure I understand what I'm doing before I try to put a rom on and screw things up further.
JoeKamel said:
Okay, that's good to know. For now though, if I just wanted to get my phone working, make sure there's not a SIM issue and such I could go back to a stock image without worrying? I just would rather do a lot more reading and make sure I understand what I'm doing before I try to put a rom on and screw things up further.
Click to expand...
Click to collapse
No doubt its good to be cautious when you are s-off. If you are just wanting plain jane stock then you could just flash a ruu from boot loader.
Sent from my ADR6425LVW using xda premium
izzaeroth said:
No doubt its good to be cautious when you are s-off. If you are just wanting plain jane stock then you could just flash a ruu from boot loader.
Click to expand...
Click to collapse
Okay, so if I go with the image here: http://forum.xda-developers.com/showpost.php?p=38527788&postcount=745&nocache=1&z=1965375486761331
Would I still need to relock the bootloader since I'm S-OFF or can I just flash that from TWRP and go from there?
JoeKamel said:
Okay, so if I go with the image here: http://forum.xda-developers.com/showpost.php?p=38527788&postcount=745&nocache=1&z=1965375486761331
Would I still need to relock the bootloader since I'm S-OFF or can I just flash that from TWRP and go from there?
Click to expand...
Click to collapse
Honestly I don't remember if you would have to relock to flash that in boot loader sine you are s-off, but I do know it won't flash from recovery
Sent from my ADR6425LVW using xda premium
izzaeroth said:
Honestly I don't remember if you would have to relock to flash that in boot loader sine you are s-off, but I do know it won't flash from recovery
Click to expand...
Click to collapse
Recovery as in HBoot or TWRP? Because I still have TWRP. I can get the windows executable RUU for ICS if need be.
JoeKamel said:
Recovery as in HBoot or TWRP? Because I still have TWRP. I can get the windows executable RUU for ICS if need be.
Click to expand...
Click to collapse
Recovery = twrp
Sent from my ADR6425LVW using xda premium
izzaeroth said:
Honestly I don't remember if you would have to relock to flash that in boot loader sine you are s-off, but I do know it won't flash from recovery
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
S-off is S-off... installing a RUU wont change that, it may set you back to 'Locked", but you are S-off so it doesn't matter, you can stay locked&s-off and its no different than unlocked/S-off.
If you are going back to stock and are S-off I would use the Global Mode Leak (4.3.605.2) available on AndroidPolice and flash in Hboot... rename file to PH98IMG.zip and place in root of SD card (how it gets there is a irrelevant) then reboot into Hboot, confirm and wait.
Sent from my HTC Aria (Liberty) running CM 7.2 using xda app-developers app