Hello All
I cant 'post in the Rom thread because I don't have enough post so I will ask it here
I'm running X-TremE JB AOKP 1.1 on my GT-1900
I saw 1.3 was released and it says "you can update to this version through OTA now"
but when I run OTA it says"No updates available"
does someone know how to fix this because I don't want to flash through recovery and wipe all data and files.
Thanks in advance
Menno
mennodings said:
Hello All
I cant 'post in the Rom thread because I don't have enough post so I will ask it here
I'm running X-TremE JB AOKP 1.1 on my GT-1900
I saw 1.3 was released and it says "you can update to this version through OTA now"
but when I run OTA it says"No updates available"
does someone know how to fix this because I don't want to flash through recovery and wipe all data and files.
Thanks in advance
Menno
Click to expand...
Click to collapse
even if you download via the OTA app, you will still probably have to flash the files downloaded via recovery.
Seriously, why are you afraid of CWM recovery?
Swyped from my Samsung Galaxy SII
mennodings said:
Hello All
I cant 'post in the Rom thread because I don't have enough post so I will ask it here
I'm running X-TremE JB AOKP 1.1 on my GT-1900
I saw 1.3 was released and it says "you can update to this version through OTA now"
but when I run OTA it says"No updates available"
does someone know how to fix this because I don't want to flash through recovery and wipe all data and files.
Thanks in advance
Menno
Click to expand...
Click to collapse
Just flash through cwm recovery. It's the safest way, and you will more than likely have problems if you don't wipe data..
Sent from my Nexus 7 using xda premium
Thank for you replies
I will update through Recobvery then.
thank you
Menno
Related
Stock Jelly Bean ROM for unlocked Transformer Prime
Info:
Stock ROM based on WW Jelly Bean 10.4.2.15 (Android 4.1.1)
Fully deodexed
Rooted
New JB bootloader included
TWRP 2.2.2.1 recovery for JB included
Can be flashed over any ROM
Warning:
Use this rom at your own risk. I am not responsible for any bricked devices.
I strongly recommend enabling NVFlash before flashing this ROM here. You CAN NOT enable NVFlash on JB bootloader!!
Use only recovery made for JB or you can brick device.
Instruction:
Download the ROM
Copy the file to your device and reboot into recovery
Wipe data/cache (factory reset) - optional
Flash the ROM update zip
Reboot and wait for final flash and then let the device boot up (it will take some time)
Enjoy Jelly Bean
Download:
WW_epad-user-redvirus-10.4.2.15.zip - 336.68 MB
MD5:a2ab74c20fd3bd1946396c1d0370c4b5
Version without bootloader and recovery:
Only for those with JB bootloader!!
WW_epad-user-redvirus-10.4.2.15-forJB.zip - 328.98 MB
MD5:a62c643ec27597c771b73d7f62ecbade
Thank you sparkym3 for your guide
Is step 3 (Wipe data/cache (factory reset)) absolutely required when updating from .28 rooted ROM for unlocked devices?
Stock ASUS update doesn't require wipe when you update from the older ASUS ROM.
Will this work without wipe if I'm updating from rooted 9.4.2.28 ROM?
Do we get to choose not to install bootloader and recovery during install for us that already have both the jb bootloader and jb recovery?
Sent from my HTC Sensation XE with Beats Audio using Tapatalk 2
CrazyCoder said:
Is step 3 (Wipe data/cache (factory reset)) absolutely required when updating from .28 rooted ROM for unlocked devices?
Stock ASUS update doesn't require wipe when you update from the older ASUS ROM.
Will this work without wipe if I'm updating from rooted 9.4.2.28 ROM?
Click to expand...
Click to collapse
You can install this ROM without wipe. /info updated
andy_rose said:
Do we get to choose not to install bootloader and recovery during install for us that already have both the jb bootloader and jb recovery?
Sent from my HTC Sensation XE with Beats Audio using Tapatalk 2
Click to expand...
Click to collapse
I made a version without bootloader and recovery.
redvirus said:
I made a version without bootloader and recovery.
Click to expand...
Click to collapse
Thanx man, appreciate it
Downloaded your latest JB for people already with new bootloader and TWRP but it failed to flash.
Can you send me recovery.log?
10x !!!!!!!!!!!
The md5 is fine but it just would not start got failed at the very beginning, I dont know if a recovery log is possible since it never recovered from anything.
Edit: Should have added I was on Craigacgomez US JB with TWRP.
Edit 2: Runing a log, should be ready in a few.
Edit 3: Sent!
Just for the record: I have a CM10 preview rom with CWM 5.8.3.4 currently on my Prime. Am I able to just wipe and flash this like any normal rom? I was told I'd have to revert back to stock ICS before flashing the new release or it might brick.
Sent from my SPH-D710 using xda premium
will try this when i get home and report back!
Hello i am on android 4.0.3 WSG Rom. Am i able to flash this rom?
Sent from my Transformer Prime TF201 using xda app-developers app
Ok the WW for JB bootloader and TWRP worked perfectly my earlier problem was I had TWRP 2.2.2.0 installed for some weird reason once on TWRP 21 it flash no problem. In my case I had to also reflash Superuser 3.2
Thanks for this Rom. Just a question. I have a US TF201 rooted and unlocked. All I am hoping to do is to install stock JB. Can I install this Rom or no? The only other Rom is see that is stock is the one that says JRO03C and that one is for US... But I don't know if it's completely based on the official release for the TF201. Thought it was based off of the update for the 300 or something. I appreciate the help
Sent from my SCH-I535 using Tapatalk 2
antnyp85 said:
Thanks for this Rom. Just a question. I have a US TF201 rooted and unlocked. All I am hoping to do is to install stock JB. Can I install this Rom or no? The only other Rom is see that is stock is the one that says JRO03C and that one is for US... But I don't know if it's completely based on the official release for the TF201. Thought it was based off of the update for the 300 or something. I appreciate the help
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I think its the same official tf201 US version many people prefer the ww tho and if i'm wrong someone will be shortly to correct me lol
---------- Post added at 01:21 AM ---------- Previous post was at 01:14 AM ----------
Nevermind i am wrong but i am running the US update one and is sold
I installed it and it work great, got the buildprop tweak done and browser2ram install, have no complaint, its very smooth and fast, I don't see any reason so far to OC and my Prime is one of the first BC0, still running strong
Thanks for this. Any chance of an odex version too for boot speed?
Sent from my HTC Sensation Z710e using xda premium
Works great on my prime. Thank you!
Had too flash the rom twice before it worked ( maybe because I delete the complete tablet incl. Rom before)
been having trouble since manually updating to official jb not being able to root or get adb to wrk to root just flashed this and it done it all for me ... thanks alot
Sent from my Transformer Prime TF201 using Tapatalk 2
adz63 said:
been having trouble since manually updating to official jb not being able to root or get adb to wrk to root just flashed this and it done it all for me ... thanks alot
Click to expand...
Click to collapse
I also manually updated, lost root, and can't get adb or fastboot to work... And now I'm stuck with the stock recovery, which won't let me select anything. Is there something I need to do first?
how to root leaked xxlsj 4.1.2 for s2??
gdstheking said:
how to root leaked xxlsj 4.1.2 for s2??
Click to expand...
Click to collapse
Download and flash the 'Philz' Kernel to root ur phone on xxlsj 4.1.2
since its the only Custom kernel that supports the same
ur 1st TM by me enjoy
Sun90 said:
Download and flash the 'Philz' Kernel to root ur phone on xxlsj 4.1.2
since its the only Custom kernel that supports the same
ur 1st TM by me enjoy
Click to expand...
Click to collapse
what about "Siyah-s2-v4.1.5"???
i flashed using philz kernal but no supersu >>??
Why not make a 3rd thread about that......you might get lucky.
Just flash the philz kernel and then install supersu via cwm
Click thanks if I helped you
ankur.co.in said:
Just flash the philz kernel and then install supersu via cwm
Click thanks if I helped you
Click to expand...
Click to collapse
given give a download link for supersu for philz kernel
Youu will not get root access if you flashed it via odin, download cmw version of it and.flash
Sent from my GT-I9100 using xda premium
philz kernel
ankur.co.in said:
Just flash the philz kernel and then install supersu via cwm
Click thanks if I helped you
Click to expand...
Click to collapse
first of all i clicked thanks already. Hehe.
Could you please send me the link where i can download philz kernel for jb.
It would be a great help.
I have stocked jb leaked and i want to change to rainbox.
Ill click thanks again just guide me where can i download the file.
droid_s2 said:
first of all i clicked thanks already. Hehe.
Could you please send me the link where i can download philz kernel for jb.
It would be a great help.
I have stocked jb leaked and i want to change to rainbox.
Ill click thanks again just guide me where can i download the file.
Click to expand...
Click to collapse
Here is the link bro sorry for late reply btw thanks for your thanks
http://forum.xda-developers.com/showthread.php?t=2031042
hey all.. im a newbie looking for some help
i did root my sgs2 phone jb version with cwm and i have superuser app installed and i have verified that it is rooted.
however i download beats audio which jammed my music player ..
so i was wondering if i can flash the stock jb again via odin ??? and will my phone if flashing works make it unrooted again?
aboalghool said:
hey all.. im a newbie looking for some help
i did root my sgs2 phone jb version with cwm and i have superuser app installed and i have verified that it is rooted.
however i download beats audio which jammed my music player ..
so i was wondering if i can flash the stock jb again via odin ??? and will my phone if flashing works make it unrooted again?
Click to expand...
Click to collapse
Yeah after flashing the firmware via odin ur phone will be unrooted
That 'exynos exploit' by 'chaingire' can also be used to root XXLSJ in just one click, without any flashing etc.
Sent from my GT-I9100 using xda premium
Hi I hope someone on here can help me...
I recently flashed my girlfriends sgs2 (via odin pc) with the new XXLSJ jelly bean leak. Because its not 'officially' released we have to use Philz kernel, is that correct? I basically want completely stock and the update WITHOUT ROOT AND YELLOW TRIANGLE...
Is this possible?
I myself have the same phone and have custom rom based on this leak and Philz kernel, but for some reason have no triangle? ?
So, I want...
- Jelly Bean Stock rom
- No Root/Triangle.
Thanks. ..
Maybe I should have waited for the official release..
sent from the unknown
match_stick said:
Hi I hope someone on here can help me...
I recently flashed my girlfriends sgs2 (via odin pc) with the new XXLSJ jelly bean leak. Because its not 'officially' released we have to use Philz kernel, is that correct? I basically want completely stock and the update WITHOUT ROOT AND YELLOW TRIANGLE...
Is this possible?
I myself have the same phone and have custom rom based on this leak and Philz kernel, but for some reason have no triangle? ?
So, I want...
- Jelly Bean Stock rom
- No Root/Triangle.
Thanks. ..
Maybe I should have waited for the official release..
sent from the unknown
Click to expand...
Click to collapse
When u flashed that leaked firmware, ur phone was already in stock but with TW 5 unrooted condition.
Secondly, for that triangle problem....Use the 'triangle away' app from play store.
Also, if u want official update then for few weeks more :/
Sent from my GT-I9100 using xda premium
Cool. I've heard some stories of hardbrick when using that app... but will most likely wait for the official update
sent from the unknown
Hi guys, I'm a new Galaxy S3 owner that is french no brand i9300XXDLJ2 with 4.1.1 stock, now I want to update to 4.1.2 but i dont want to lose all my things, I'm wainting for OTA message that I haven't get yet.. I though to flash through clockwork the OTA but I don't know where to download it..
Is it possible to update flashing the OTA of another country? If yes, could someone post it with a link to download? I need the no brand or Vodafone version, thanks to those who'll reply
sammobile.com has I9300 firmwares. And yes, you can flash firmware from other countries. Flash them using Odin. XDA does have CWM versions on General section. Search. All files will stay as long as you don't wipe anything.
Rusl1TA said:
Hi guys, I'm a new Galaxy S3 owner that is french no brand i9300XXDLJ2 with 4.1.1 stock, now I want to update to 4.1.2 but i dont want to lose all my things, I'm wainting for OTA message that I haven't get yet.. I though to flash through clockwork the OTA but I don't know where to download it..
Is it possible to update flashing the OTA of another country? If yes, could someone post it with a link to download? I need the no brand or Vodafone version, thanks to those who'll reply
Click to expand...
Click to collapse
DID you try updating using KIES.
drraptor said:
DID you try updating using KIES.
Click to expand...
Click to collapse
This is the problem: yesterday I returned to stock recovery and I tried to get update with Kies but nothing and I haven't got OTA message..
xcly said:
sammobile.com has I9300 firmwares. And yes, you can flash firmware from other countries. Flash them using Odin. XDA does have CWM versions on General section. Search. All files will stay as long as you don't wipe anything.
Click to expand...
Click to collapse
I'll try as you said, thanks :thumbup:
EDIT: Done and it works perfect! Thanks to everyone
Hi, I have updated and rooted my phone a while ago so I have forgotten a few things... I have CyanogenMod 9.1.0 and android version is 4.0.4... And now I came here and saw that there is android 4.2 and CM 10.1.... But I didn't found any information for updating between those two, there is only for coming from stock firmware. Can I just download 10.1 and install it from Clockwork mod or should I first update to 4.2 and how to do it?
Wipe data/factory reset after flashing the kernel for the new version and install the rom in cwm. All your data will be lost, but your phone should boot
Btw please ask questions in the Q&A forum
Sent from my Nexus 4 running Android 4.2.2
mihahn said:
Wipe data/factory reset after flashing the kernel for the new version and install the rom in cwm. All your data will be lost, but your phone should boot
Btw please ask questions in the Q&A forum
Sent from my Nexus 4 running Android 4.2.2
Click to expand...
Click to collapse
Sorry for the wrong forum...
And tnx for the reply... So no need to update to 4.2 manually, just kernel for rom and then rom?? Will it be like that for any onther custom rom?
filipbg said:
Sorry for the wrong forum...
And tnx for the reply... So no need to update to 4.2 manually, just kernel for rom and then rom?? Will it be like that for any onther custom rom?
Click to expand...
Click to collapse
Yes it's the same for all custom roms. Flash the kernel, boot in cwm and do the wipes, then flash the rom
Btw you could read my guide on how to install a custom rom/kernel to get more information. The link is in the "Roll up sticky thread" in the stickies in general forum :good:
Sent from my Nexus 4 running Android 4.2.2
filipbg said:
Sorry for the wrong forum...
And tnx for the reply... So no need to update to 4.2 manually, just kernel for rom and then rom?? Will it be like that for any onther custom rom?
Click to expand...
Click to collapse
this is the manual way (automatic is SEUS ).. but to ur question yes, it so:
before installing rom, check which kernel needed for this (or if its inside zip, to flash BEFORE install; via fastboot..)
if u switch between stock ics & cm builds OR between cm9 and cm10(.1) FULL WIPE IS recommended!!
if u do only a upgrade like install newest version of smae rom on ur phone u can WIPE NOTHING! (only if u get problem )
yes 1st kernel (recovery (CWM) built in) then ROM ; maybe some addons/gapps (google apps), dun
peace
Guys I am using a Samsung galaxy s2 gt i9100 running jelly bean 4.1.2 stock xwlst firmware and i rooted my phone using the one click root using exploits. I am all new to this rooting process and so i installed titanium backup and i was trying to remove playstore inorder to install modded play store and all of a sudden my device rebooted and now its stuck with the boot screen. So i tried to flash canogenmod 10.2 for the first time and used clock work mod recovery. I wiped my memory cleared the cache(couldnt find dalvik cache and the advanced menu either) and applied the latest cyanogen mod 20130827 from the cyanogenmod.org using my external sdcard. It displayed assert failed )==gti9100t status 7 error. I can assure you that i downloaded the international version of the cyanogenmod and not any other variant. Kindly help me with a solution or a link to the correct cyanogenmod rom package. Thank you. Looking forward to an earlier response sorry if i had posted in a wrong section. i am new to the forum
machokingjim said:
Guys I am using a Samsung galaxy s2 gt i9100 running jelly bean 4.1.2 stock xwlst firmware and i rooted my phone using the one click root using exploits. I am all new to this rooting process and so i installed titanium backup and i was trying to remove playstore inorder to install modded play store and all of a sudden my device rebooted and now its stuck with the boot screen. So i tried to flash canogenmod 10.2 for the first time and used clock work mod recovery. I wiped my memory cleared the cache(couldnt find dalvik cache and the advanced menu either) and applied the latest cyanogen mod 20130827 from the cyanogenmod.org using my external sdcard. It displayed assert failed )==gti9100t status 7 error. I can assure you that i downloaded the international version of the cyanogenmod and not any other variant. Kindly help me with a solution or a link to the correct cyanogenmod rom package. Thank you. Looking forward to an earlier response sorry if i had posted in a wrong section. i am new to the forum
Click to expand...
Click to collapse
ok donw get worry u have to update cwmr to the latest version so u dont get that annoing 7 error
btw i succeded instal cyanogen and omega with twrp...allso got 7 error on cyanogen mod with cwmr
Laurentiu27 said:
ok donw get worry u have to update cwmr to the latest version so u dont get that annoing 7 error
btw i succeded instal cyanogen and omega with twrp...allso got 7 error on cyanogen mod with cwmr
Click to expand...
Click to collapse
so it doesnt matter what type of kernel we are using??
and now i tried flashing a paranoid rom and it is returning E:signature verification failed. please help me with something. Thank you
the kernel will flash with new ROM so the old kernel isn't important, it's delete in flash process.
I've the same problem whit cwmr6, but using cwmr 5.5 it seems resolved.
Cornhelius said:
the kernel will flash with new ROM so the old kernel isn't important, it's delete in flash process.
I've the same problem whit cwmr6, but using cwmr 5.5 it seems resolved.
Click to expand...
Click to collapse
so what can i do for now to gain my access to the phone? It doesnt show me anything except for the boot screen.
problem solved