I wanted to flash the WM7.5 Mango for my Toshiba TG01 ,I reached the white screen but the following error appeared,"SD Downloading failed,File open Error"
Help?
Try to re'download the rom
Maybe the file was corrupt
--------------------------------------------
Sent from my GT-S5830 running ImaGinary ICS.
Thank if it helped.It's there for a reason
Please help me!
Hi everyone! Recently I got this Thosiba tg01 and wanted to change from wm6.5 to 7 or to some cooked rom.
What I tried:
SDDL method: SD Downloading Failed - File Open Error
Pin method: Same error.
Tried 4 roms, all gave me the same error.
Is there a way to flash rom from pc or from the phone itself. Please help me I just can't stand WM6,5. If not, i'll sell my device.
Half a year on I still get the same problem,can't seem to find a solution
Seems like I will never get a solution then
the sd card must be formated and must contain Only "PRG" folder, inside folder put sddl and .bin file 0321 version !
Hello there,
Just to clarify:
- the uSD Card must be formatted.
- sddl+.exe must be in the ROOT of the card.
- the TGO01xxxx.tsw ROM image file must be in the \prg folder.
- execute sddl+.exe from file explorer and it will then flash the ROM.
Hope that helps It's actually very straightforward and reliable.
The 'short pin' method is primarily used if you happen to have a 'half-bricked' device and are unable to boot to start with.
Regards,
Kevin
Related
I am trying to root my phone and update it with the Modaco rom, but I seem to have a problem doing that as I have this Asian rom which does not have any marketplace nor does it have any file manager to access my SD card. I have downloaded the flash recovery file and the recovery image file on my SD card to start the rooting process but cannot access those files until I have a file manager on my phone.
Please, if anyone could give me an idea on how to do that, I will greatly appreciate that.
Thanks.
Look for android application installer .bat. It is slow but does the job. It is for pc and install your files from there.
I have Vista Home Premium 64bit and I did download WinRAR 64 bit edition. Whenever I try to install that there claims to be a corrupt file and I have downloaded it a few times from a few sites.
So I go back to the 32 bit version of WinRAR and that installs fine, but reminds me for better performance to use the 64 bit version.
Now, whenever I extract a ZIP or RAR file the Update.exe is missing or I receive a message about the CRC security not matching. AND if and only if I can get the files extracted when I try to install the ROM the Gtab is constantly stating a "status 7" error. I have tried TNT, VEGAn and 1 other ROM and each will not install.
Is there anyone who would be willing to use Skype or some other means to assist me in getting the tablet back up and running something, even if that's the stock ROM?
I do have Clockwork Mod installed already, that was the only thing that seems to have installed correctly.
Thank you in advance,
Brian
If I undertsand correctly: Youre trying to extract the contents of the "update.zip" file that comes as part of the ROM download?
If so.. you dont extract it, you leave it as "update.zip" in your sdcard directory.
I remember seeing a "pictoral" view of what your filesystem should look like in this xda somewhere. Ill try to find it.
No, I am having problem extracting the ROMs from Zip or Rar, so I went and downloaded Memtest86 just to see if there was a RAM problem. That checked out fine after an hour of testing.
Most every Zip or Rar I try to extract have CRC errors, even if it's unrelated to this site. But part of that causes the Update.zip not to extract at all and I only get the "recovery" folder and Command and the Update.zip had an error and doesn't extract.
I then tried it on a laptop with Win7 and I could extract some files then more errors, then I tried a Win XP laptop and that seemed to extract the files fine.
My latest is now the Gtab is bricked, stuck trying to install recovery that never ends. So I looked up for the USB driver and nvflash and the ROM that goes with that and the Gtab doesn't show up as a removable drive so I can transfer the files on there. I have copied them to SDcard but I can't get that to read the data.
So, at this point the Gtab is looping and I cannot get back into Clockwork or get it to show as a drive using the USB drivers and the -Vol and Power button.
Currently when I just power on the tablet in red text I get:
Magic value mismatch:
:"
Critical failure: Unable to start kernel.
Unrecoverable bootloader error (0x00000002).
FIXED
PROBLEM FIXED.
I saw another thread stating similar problem, located here http://forum.xda-developers.com/showthread.php?t=1026757 and followed the advice of a few people and now the Gtab is working again. Its stock ROM but the main thing is it's working again.
Help!!
i been surfing the internet trying to find a way of how i can root my device. so far ive had on luck. i have tried gingerbreak but i don't think this has even worked. does anyone have any ideas of how you could root this particular device. if you have any suggestions or know how you can, i would be very grateful.
HOWTO - root PMP5080B
There is a way to root the tablet.
But it it does not root the runnning version, it roots the update image.
So if don't have the most actual firmware try this:
(maybe you can flash the firmware even it is not newer, but i don't know how)
Todo (Windows PC necessary):
At first load the latest firmware and unzip it:
h t t p : / / w w w .prestigio.com/info/product/downloads?NODE_ID=61101103718510974&ITEM=110706112617507776
Download the Wendal tool:
h t t p s :/ / docs.google.com/leaf?id=0B8h...RjZjFmODdiZTQ1
Then follow this steps:
1. Unzip the Wendal tool, you get a folder named "RK29xxImagetools_v2.1".
2. copy the update.img from Prestigio firmware download in the "RK29xxImagetools_v2.1" folder and rename the file to "wendal.img"
3. start "Runme.bat"
4. press "1", you get the message that you have to rename your file. Since you have already done this before proceed. The batch file starts, make sure you dont see any errors.
5. press "2" followed by "Enter". The rootet image will be created automatically
6. end the programm with "3"
7. in the "RK29xxImagetools_v2.1" you will find a file named "wendal-new.img", copy it to your SD card and rename it to "update.img".
8. put your SD card in your tablet, you will get a message to update your firmware
9. the tablet reboots, flashes the new firmware
10. be happy with your root access
Still having problems.
i have done what you said for me to do but when i rename the firmware to "wendal.img" and run it for some reason it keeps saying i haven't put the firmware in the folder when i have. do you know what how you can sort this out.
cheers
Did you unzip the firmware download?
Tried, tested & confirmed working
Just like to note that the software used will give you a warning about placing the update.img in the correct folder and renaming it even when it has already been done. You just have to press enter!
I have 5080B and i want to root it, but on ICS stock rom. Problem is, i cannot use wendal tools cause it can't add su and superuser.apk into /system ("no such directory") and even earlier i used to root gingerbread with these tools it is half-root - /system not rw, but superuser works
i saw update 2.0.2 from prestigio, pre-rooted, but i want to root this, newest version, 2.0.3
i have linux setup running and i tried mounting system.img but i can only add su, and nothing else cause there's no space...
also, how do i boot recovery from the device itself? i tried vol- and power key but there is an image of an 'destroyed' Android bot, no options there at all
Same problem - want root on Prestigio PMP 5080B
Just got a Prestigio PMP5080B running ICS 4 and want to root the tablet. I read from the preceding message that thhe method discussed here doesn't seem to work with it. Any ideas would be most welcomed here too.
By the way Hi!
Ziggy
help
remoh said:
There is a way to root the tablet.
But it it does not root the runnning version, it roots the update image.
So if don't have the most actual firmware try this:
(maybe you can flash the firmware even it is not newer, but i don't know how)
Todo (Windows PC necessary):
At first load the latest firmware and unzip it:
h t t p : / / w w w .prestigio.com/info/product/downloads?NODE_ID=61101103718510974&ITEM=110706112617507776
Download the Wendal tool:
h t t p s :/ / docs.google.com/leaf?id=0B8h...RjZjFmODdiZTQ1
Then follow this steps:
1. Unzip the Wendal tool, you get a folder named "RK29xxImagetools_v2.1".
2. copy the update.img from Prestigio firmware download in the "RK29xxImagetools_v2.1" folder and rename the file to "wendal.img"
3. start "Runme.bat"
4. press "1", you get the message that you have to rename your file. Since you have already done this before proceed. The batch file starts, make sure you dont see any errors.
5. press "2" followed by "Enter". The rootet image will be created automatically
6. end the programm with "3"
7. in the "RK29xxImagetools_v2.1" you will find a file named "wendal-new.img", copy it to your SD card and rename it to "update.img".
8. put your SD card in your tablet, you will get a message to update your firmware
9. the tablet reboots, flashes the new firmware
10. be happy with your root access
Click to expand...
Click to collapse
Hey, i have done everything right, but after unzipping the update.zip, i find only the boot.img file not the update.img file...and even after renaming it to wendal.img, the runme.bat program says FAILED...any clue how this can be fixed?
TVMALOPE.IM said:
Hey, i have done everything right, but after unzipping the update.zip, i find only the boot.img file not the update.img file...and even after renaming it to wendal.img, the runme.bat program says FAILED...any clue how this can be fixed?
Click to expand...
Click to collapse
If you want, i can share my rootet version 1.0.26 for you, i still have the old .img file
But actually i am using this version on my pad:
http://x--t-e-a-m.blogspot.de/
I think it is far better than the original firmware (root included, it is Android 4.1 !)
Italian people did it, so maybe bing translator can help you
http://www.microsofttranslator.com/bv.aspx?from=&to=en&a=http://x--t-e-a-m.blogspot.de/
help
thanks but im new to android so i cant understand, can you send me your .img file...because i just want to copy straight to memory card and get root access, please...my tab is PMP7170B3G
TVMALOPE.IM said:
thanks but im new to android so i cant understand, can you send me your .img file...because i just want to copy straight to memory card and get root access, please...my tab is PMP7170B3G
Click to expand...
Click to collapse
The img file is for PMP5080B, so it won't help. Wrong thread, sorry
Hi there ! I have a big issue with my Prestigio 4040.I put a modified vold.fstab file in the system folder and after restarting it doesn't read my sd card.I tried to enter the recovery mode , the robot stays with a triangle with ! inside it and it doesnt work.I tried to go from a browser to download the original vold file but the browser doesn't let me download the file cause it needs sd card.I tried modifying the file using total commander it didn't work.Can somebody help me please ?
CoolViber said:
Hi there ! I have a big issue with my Prestigio 4040.I put a modified vold.fstab file in the system folder and after restarting it doesn't read my sd card.I tried to enter the recovery mode , the robot stays with a triangle with ! inside it and it doesnt work.I tried to go from a browser to download the original vold file but the browser doesn't let me download the file cause it needs sd card.I tried modifying the file using total commander it didn't work.Can somebody help me please ?
Click to expand...
Click to collapse
ive noticed that when these kind of problems occur, even hard reset doesnt help much. Only thing that is is to flash the original software, or at least LEWA ports, as these are changing and reverting root files back to working state. so i suggest you download these:
http://4pda.ru/forum/dl/post/2599564/1.0.10.part1.rar
http://4pda.ru/forum/dl/post/2599568/1.0.10.part2.rar
extract, and flash it trough SP flash software, if you dont know exact procedure, well google it out, these things are the same regarding to mt6575 series of chips.
Best of luck
Ok, I rooted my NT using external SD card and was able to toggle between android 2.3.4 and B&N OS. I have been spending days trying to figure out how to upgrade to CM 10.2 (and have been unsuccessful due to endless tutorials posting invalid files). I finally found a tutorial on this forum and there was a part that specifically said to not mess with the drive that my nook was plugged into. Well...too many windows up, too long on forums etc...long story short...I messed with that drive.
So now my NT boots up to the B&N start up screen; but I get a forced restart error and an error message that says that nook root file stopped working. The touch screen doesn't work and I can't do anything but power off.
Is there ANYONE who can help me? I'll be eternally grateful!
You might consider trying this repart.img method described at http://raywaldo.com/2012/06/how-to-un-brick-a-nook-tablet-8gb-or-16gb/.
files won't extract
When I googled feverishly for a solution, I did find that website and tried that method. The problem that I'm having with this entire process is that most of these files are invalid, missing a part or corrupted. I've tried using WinRAR and 7-zip and neither program is able to successfully extract the files; this repart img included. This project of mine has turned into a frustrating debacle!
Thank you for your reply, though!
I'd suggest you burn a pre-made SD CM10.x image from http://iamafanof.wordpress.com/2013...id-4-3-for-nook-tablet-imgsdc-boot-09aug2013/ and see if you can successfully boot and run it.
If that works you can proceed to restore the internal emmc image either by using the repart.img method or by flashing flash_stock_1.4.2.zip from https://github.com/succulent/acclaim_recovery_sdcard. See also http://forum.xda-developers.com/showthread.php?t=2575489 for potential helpful info and pointers.
When I extract files, this is the message I get from most of the files I unzip. I tried the cm10.2 img file and I couldn't extract it. I included a screenshot of the error message I keep getting. I've tried several different unzip programs and it's always the same error.
Bad download? Redownloaded and same error?
aworobec said:
When I extract files, this is the message I get from most of the files I unzip. I tried the cm10.2 img file and I couldn't extract it. I included a screenshot of the error message I keep getting. I've tried several different unzip programs and it's always the same error.
Click to expand...
Click to collapse
Did you try the alternate mirror on Mediafire http://www.mediafire.com/download/bo2qu6v4qo9p6a2/cm_acclaim_10.2.0-RC0_13OCT2013_HD_SDC_IMG.7z?
Also FWIW I use 7-zip archive manager program (www.7-zip.org/download.html‎).