[Q]Brick or not? - HTC Flyer, EVO View 4G

Hello guys ... I have read a lot now but everything I tried does not work.
I have a HTC Flyer that hangs at the HTC startup screen with the following details:
***relocked***
*security warning*
FLYER PVT SHIP S-ON RL
HBOOT 1.11.0011
MICROP-0950
RADIO-3822.10.08.07_M
CID is -->O2___102
I tried to unlock the bootloader again with fastboot flash unlocktoken unlock_code.bin (from HTCdev) but nothing happened until I end this command.
I cannot get shell access via adb ... only some fastboot commands like getvar cid are working. get var all for example not
I also tried this RUU_Flyer_O2_DE_1.40.207.5_Radio_20.35.30.089BU_38 09.04.04.21_M_release_188730_signed ... without success.
...and nevertheless I can not power off ... everytime reboot to fastboot 9v ac
Can someone give me a hint?

Hi .
Couple of things .
You need to reflash to stock.
You first need to be bootloader locked/ relocked.(which you are so leave this as it is)
Next get the RUU version that matches your Radio .
You can find this list in the development section.
There could be a couple of versions of your radio . The multiple versions is because of the android OS versions that was released for your device. Get the earliest one as it will also mean that it has the earlier hboot which you install and can get s-off later since 1.11.0011 is not able to get s-off.
Make sure also you get the one that is the same as your CID. It will fail if its not the same (it won't brick don't worry)
And then run the RUU from your PC while keeping the.flyer in fastboot usb mode..
It will be successful.
Sent from my HTC Flyer P510e using xda app-developers app

What you did to get to this state will likely allow someone to help you
Flyer

pls don't forget to hit the ''thanks'' if it's helpful.......................thanks
what you need to do is just try recover the old unlock_code.bin you use the first time to unlock the bootloader ... and run this comand while on fastboot }]]] fastboot flash unlocktoken unlock_code.bin
C:\Users\computer>cd c:\android
c:\android>fastboot flash unlocktoken unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.024s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.014s]
finished. total time: 0.052s
:angel:

Related

[Q] I want to install ICS and need help

Dear All, i need help to install ICS in EVO 3D
My Evo 3d is UK Based, Currently running GB 2.3.4
IN BOOT MENU IT SHOWS
****LOCKED****
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.49.0009
eMMC-boot
Jul 18 2011,12:09:31
I want to install ICS rom in my phone and i have few questions
I found that i have to unlock the bootloader with HTCDev method, but do i need a S-OFF? to install ICS in phone.
Can any one please help me in this method?
Need Help?
I tried to unlock bootloader but got following error.
C:\android>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.143s]
writing 'unlocktoken'...
FAILED (remote: unlock token check failed)
finished. total time: 0.149s
with 1.49 hboot, you should be able to use revolutionary... although I'm not sure about it being a GSM device... check out http://revolutionary.io/
Yes but what about, Boot Unlocker?
I tried the HTC Dev. Unlocker method but didnt work out so how its gonna possible now?
Revolutionary does the same thing as HTCDev(well, more). HTCDev is only for hboot 1.5+. Did you try Revolutionary? After it is complete you should have hboot 1.4 something and it will be unlocked and S-OFF.

[Q] What is bricked? Get a beer !

I have problem. A seriously problem.
Hboot 1.53.0007 S-ON
My Evo have restarts after showing HTC screen when I try to boot into recovery or normal boot.
After flashing RUU got the same problem.
I can:
get to fastboot but not every command correctly work, when changing CID have errors.
When I try to have LOCK Bootloader(not "relock") for warranty purposes with this command:
" fastboot oem writesecureflag 3 " is response with that error:
C:\fastboot>fastboot oem writesecureflag 3
< waiting for device >
...
(bootloader) vreg_set: request is duplicated id 14
(bootloader) shooter_u_init_sd, SD card power on ok
(bootloader) sdcc_init_memory_device done
(bootloader) [FAT_ERROR] fat_open_file: can not find SMART_IO.CRD
(bootloader) [JAVACARD_ERR] SMART_IO.CRD cann't find
(bootloader) writesecureflag: Permission denied, value 1
OKAY [ 1.085s]
finished. total time: 1.085s
Click to expand...
Click to collapse
I think is the linux problem.
Is any method to repair that?
For help I send a Paypal Gift beacouse it's better than buying a new phone.
Seriously please help me and forgive my bad english
mvha said:
I have problem. A seriously problem.
Hboot 1.53.0007 S-ON
My Evo have restarts after showing HTC screen when I try to boot into recovery or normal boot.
After flashing RUU got the same problem.
I can:
get to fastboot but not every command correctly work, when changing CID have errors.
When I try to have LOCK Bootloader(not "relock") for warranty purposes with this command:
" fastboot oem writesecureflag 3 " is response with that error:
I think is the linux problem.
Is any method to repair that?
For help I send a Paypal Gift beacouse it's better than buying a new phone.
Seriously please help me and forgive my bad english
Click to expand...
Click to collapse
"fastboot oem writesecureflag 3" is command for s-off device to gain status s-on, u already have status s-on, right?
"fastboot oem lock" is command to lock bootloader, did u try this ?
Just simply relock your bootloader with "fastboot oem lock" download and run official RUU ICS rom, from here http://www.androidfiles.org/ruu/?dir=Shooter.
After flashing RUU got the same problem.
Click to expand...
Click to collapse
So I already do this steps and it doesn't work
Only flashing boot from CM9 nightly have difference because it restarts later(on HTC Quietly Brilliant screen).
But why I cant access any recovery after reflashed it using "fastboot flash recovery ....img" command.
Flashing always completed successfully.
Only Bootloader repair with JTAG helped. Now I have s-off and hboot 1.49.007.
Sent from my Evo 3D GSM using xda premium

[Q] Need Help Rooting an Evo 3D

Phone: HTC Evo 3D
*** LOCKED ***
SHOOTER XC SHIP S-ON RL
HBOOT-1.58.0000
eMMC-boot
May 17 2012, 15:06:44
I'm a newbie. Last week, I bought this phone from a lady. She told me it had already been flashed to Cricket (my current carrier). Using various threads on the forums here, I spent several hours trying to figure out how to get it to root with no luck.
I got the unlock_code.bin from HTCDev fine and placed it in my android-sdk folder.
I put my phone in FASTBOOT USB, entered "fastboot flash unlocktoken unlock_code.bin" and got back:
sending 'unlocktoken' (0 KB)...
OKAY [ 0.152s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.008s]
finished. total time: 0.161s​On my phone, I didn't receive the expected "Unlock Bootloader?" screen. It just remained in FASTBOOT USB mode.
I tried to do it all over again and had the same outcome.
I'm frustrated. I need help. How can I unlock my phone and get it to root?
pezastic said:
How can I unlock my phone and get it to root?
Click to expand...
Click to collapse
As far as i remember i has a similar problem and i had to run Ful RUU in order to unlock Bottloader.
pezastic said:
Phone: HTC Evo 3D
*** LOCKED ***
SHOOTER XC SHIP S-ON RL
HBOOT-1.58.0000
eMMC-boot
May 17 2012, 15:06:44
I'm a newbie. Last week, I bought this phone from a lady. She told me it had already been flashed to Cricket (my current carrier). Using various threads on the forums here, I spent several hours trying to figure out how to get it to root with no luck.
I got the unlock_code.bin from HTCDev fine and placed it in my android-sdk folder.
I put my phone in FASTBOOT USB, entered "fastboot flash unlocktoken unlock_code.bin" and got back:
sending 'unlocktoken' (0 KB)...
OKAY [ 0.152s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.008s]
finished. total time: 0.161s​On my phone, I didn't receive the expected "Unlock Bootloader?" screen. It just remained in FASTBOOT USB mode.
I tried to do it all over again and had the same outcome.
I'm frustrated. I need help. How can I unlock my phone and get it to root?
Click to expand...
Click to collapse
it may have something with where you put it. in my "root" folder is adb and fastboot ONLY. i put what i want in there just to flash it.
in other words
c:\documents and settings\user\desktop\root
fastboot flash unlock_token.bin
try to find fastboot and adb and copy them to their own folder. for me i named it "root"
No cigar
jaredl45600 said:
try to find fastboot and adb and copy them to their own folder. for me i named it "root"
Click to expand...
Click to collapse
I did that, creating the new "root" folder on my desktop, just like you did. I didn't know where to put unlock_code.bin, though, so I put it on the SD root. When I tried to flash it, I got back:
error: cannot load 'unlock_code.bin'​So, I put unlock_code.bin in the newly created folder on my desktop. Then, reflashed and got:
sending 'unlocktoken' (0 KB)... OKAY [ 0.151s]
writing 'unlocktoken'... INFOunlock token check successfully
OKAY [ 0.006s]
finished. total time: 0.159s​That's a bit different from my previous response, but with the same outcome. There is no option to proceed forward, and the top of the screen says the same thing. :crying:
Am I doing something wrong?
Flash RUU then unlock bootloader.
Still... after all these years
luis4ever said:
Flash RUU then unlock bootloader.
Click to expand...
Click to collapse
Which ruu should I flash? It currently has v2.95.651.5, and I can't find a ruu for that version (or higher?). Attempting to flash previous versions produces an error 155.
Hi,
please use this guide: http://forum.xda-developers.com/showthread.php?t=1889438
it should answer all of your questions.:good:
Hi,
please use this guide: http://forum.xda-developers.com/show....php?t=1889438
it should answer all of your questions.
COLOR="Silver"]
---------- Post added at 11:20 PM ---------- Previous post was at 11:18 PM ----------
[/COLOR]
No, that simply tells you to go to htcdev.com and run the unlock process, which is the hangup in the first palce and what isn't working. I'm having the same problem.
Pezastic, have you gotten anywhere with this yet? If so, how? I've jacked with this phone for two weeks and I'm about ready to ditch it and get a Galaxy. They're soooo much easier to work with.
does the Juopunutbear S-OFF woks with hboot 1.58 o virgin phone?

[Q] Softbricked and really screwed up.....

Okay guys. I unlocked with Moonshine, was on a Carbon ROM 10.1, updated last night to a 10.2 based Carbon ROM and lost my data. I found out to get it back, I needed to RUU back to stock. Downloaded the RUU and tried to run but it tells me that fastboot.exe and adb.exe have stopped working (I am on Windows 8). In the meantime, I missed a step and re-locked the bootloader early.
Trying to re-unlock with Moonshine and it continually reboots my phone at the "Launching Temproot" stage. Tried to unlock with Facepalm and it worked fine except it didn't fail (as it's designed too) Try to run the next step from Facepalm (The boot stage) and it fails.
Now when I hard reboot get out of the HTC screen from Facepalm, it hangs on the splash screen which is custom. Also after I performed Facepalm, it overwrote my custom recovery so that's gone and it won't let me write another one because the bootloader is locked.
I'm am at a complete loss here and am very afraid that my DNA it toast but I know there is a glimmer of hope because I can access fastboot. Any help from the masters here at XDA would be great.
Snowman1771 said:
Okay guys. I unlocked with Moonshine, was on a Carbon ROM 10.1, updated last night to a 10.2 based Carbon ROM and lost my data. I found out to get it back, I needed to RUU back to stock. Downloaded the RUU and tried to run but it tells me that fastboot.exe and adb.exe have stopped working (I am on Windows 8). In the meantime, I missed a step and re-locked the bootloader early.
Trying to re-unlock with Moonshine and it continually reboots my phone at the "Launching Temproot" stage. Tried to unlock with Facepalm and it worked fine except it didn't fail (as it's designed too) Try to run the next step from Facepalm (The boot stage) and it fails.
Now when I hard reboot get out of the HTC screen from Facepalm, it hangs on the splash screen which is custom. Also after I performed Facepalm, it overwrote my custom recovery so that's gone and it won't let me write another one because the bootloader is locked.
I'm am at a complete loss here and am very afraid that my DNA it toast but I know there is a glimmer of hope because I can access fastboot. Any help from the masters here at XDA would be great.
Click to expand...
Click to collapse
Wow! 1)..RUU does totally format, erase and finally restore the original system that came with the phone as new. so you loose everything
2) Try it from Windows 7 PC
3) Return to stock on Moonshine S-Off > http://forum.xda-developers.com/showthread.php?t=2293919&highlight=flash+radio
Okay, Tried RUU from a Windows 7 pc and no dice, I get error 170 (USB connection) but no fastboot or adb failures. I was able to flash the stock 1.15 HBOOT but when I go to fastboot it tells me my HBOOT is version 1.33.
Tried Facepalm to no avail, It still won't fail after the first command as its supposed to. Tried Moonshine as well but wouldn't work because debugging isn't enabled.
Found a guide that said to find the RUU rom in the temp files and put that on the sd-card which I can't do because it won't boot, but thought I would try to flash it and this is what it did - P.S. The Rom is the PB99IMG file
C:\Users\Owner\Desktop\adt-bundle-windows-x86_64-20130729\sdk\tools>fastboot oem
rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.045s]
finished. total time: 0.045s
C:\Users\Owner\Desktop\adt-bundle-windows-x86_64-20130729\sdk\tools>fastboot fla
sh zip PB99IMG.zip
sending 'zip' (913111 KB)...
OKAY [ 40.273s]
writing 'zip'...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 22 loading zip info fail)
finished. total time: 46.433s
C:\Users\Owner\Desktop\adt-bundle-windows-x86_64-20130729\sdk\tools>
Snowman1771 said:
Okay, Tried RUU from a Windows 7 pc and no dice, I get error 170 (USB connection) but no fastboot or adb failures. I was able to flash the stock 1.15 HBOOT but when I go to fastboot it tells me my HBOOT is version 1.33.
Tried Facepalm to no avail, It still won't fail after the first command as its supposed to. Tried Moonshine as well but wouldn't work because debugging isn't enabled.
Found a guide that said to find the RUU rom in the temp files and put that on the sd-card which I can't do because it won't boot, but thought I would try to flash it and this is what it did - P.S. The Rom is the PB99IMG file
C:\Users\Owner\Desktop\adt-bundle-windows-x86_64-20130729\sdk\tools>fastboot oem
rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.045s]
finished. total time: 0.045s
C:\Users\Owner\Desktop\adt-bundle-windows-x86_64-20130729\sdk\tools>fastboot fla
sh zip PB99IMG.zip
sending 'zip' (913111 KB)...
OKAY [ 40.273s]
writing 'zip'...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 22 loading zip info fail)
finished. total time: 46.433s
C:\Users\Owner\Desktop\adt-bundle-windows-x86_64-20130729\sdk\tools>
Click to expand...
Click to collapse
where did you get the instructions found with this PB99IMG.zip file?
Your Bootloader is locked or unlocked?
letschky said:
where did you get the instructions found with this PB99IMG.zip file?
Your Bootloader is locked or unlocked?
Click to expand...
Click to collapse
IDK it may work, worked in a different phone, but have to be pushed to the sd card
http://forum.xda-developers.com/showthread.php?p=32574569
letschky said:
where did you get the instructions found with this PB99IMG.zip file?
Your Bootloader is locked or unlocked?
Click to expand...
Click to collapse
Here is the link to what I used to get the PB99IMG.zip - It is the same one finanandroid posted
http://forum.xda-developers.com/showthread.php?p=32574569
And my Bootloader is locked because I was following this guide (http://forum.xda-developers.com/showthread.php?t=2293919) and spaced out and locked the bootloader without realizing I needed to flash the stock HBOOT and Splash screen, That's what I get for trying to do it at 11:30 at night.
Snowman1771 said:
Here is the link to what I used to get the PB99IMG.zip - It is the same one finanandroid posted
http://forum.xda-developers.com/showthread.php?p=32574569
And my Bootloader is locked because I was following this guide (http://forum.xda-developers.com/showthread.php?t=2293919) and spaced out and locked the bootloader without realizing I needed to flash the stock HBOOT and Splash screen, That's what I get for trying to do it at 11:30 at night.
Click to expand...
Click to collapse
Where are you currently?
s-off?
locked?
whats your CID read as in fastboot?
Also are you on windows 8 or 8.1 and do you have working drivers to begin with.
I have S-ON and Bootloader is locked,Problem,i have Software 1.15 but i flash the HBoot,Boot.img ... To make Moonshine S-OFF.This is the 2.06 Kernel with Software 1.15 and i have Problem with Wifi and the Screen flackered white.And the next Problem,i can't unlock the Bootloader witn Hboot 1.33,i hope you understand me.
jake.corey.jacobs said:
Where are you currently?
s-off?
locked?
whats your CID read as in fastboot?
Also are you on windows 8 or 8.1 and do you have working drivers to begin with.
Click to expand...
Click to collapse
My bootloader screen reads,
"Tampered
Locked
Monarudo pvt ship s-off
CID-VZW_001
HBOOT-1.33.0001
RADIO-1.01.01.0110"
I am on Windows 8 (and have access to a Windows 7 desktop) and yes, I have working drivers.
Moonshine and face palm are failing because you're already s-off
Try a different usb port and flash the stock splash screen, then run RUU
Phaded said:
Moonshine and face palm are failing because you're already s-off
Try a different usb port and flash the stock splash screen, then run RUU
Click to expand...
Click to collapse
Okay I tried both of my 2.0 USB slots and neither worked, Here is what I get -
C:\Users\Matt\Desktop\adt-bundle-windows-x86_64-20130522\sdk\tools>fastboot flas
h splash1 splash.img
sending 'splash1' (4050 KB)...
OKAY [ 0.616s]
writing 'splash1'...
FAILED (remote: not allowed)
finished. total time: 0.653s
You need to unlock... Um try htcdev and go for an unlock token. Since you're s-off it may work.
Fastboot oem unlock might work as well. Try that first, then if no go try htcdev
Phaded said:
You need to unlock... Um try htcdev and go for an unlock token. Since you're s-off it may work.
Fastboot oem unlock might work as well. Try that first, then if no go try htcdev
Click to expand...
Click to collapse
Just tried to OEM unlock and nothing, it gives me this.
C:\Users\Owner\Desktop\adt-bundle-windows-x86_64-20130729\sdk\tools>fastboot oem
unlock
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.010s]
finished. total time: 0.010s
The command is "fastboot oem unlock" isn't?
Just looked into HTC Dev and the DNA is not listed as being supported.
Snowman1771 said:
Just looked into HTC Dev and the DNA is not listed as being supported.
Click to expand...
Click to collapse
you have to select other devices.
Like Jake said, scroll to the other devices part, then try
jake.corey.jacobs said:
you have to select other devices.
Click to expand...
Click to collapse
Just tried and it failed, here is what it said.
Error Code: 160.
Error Reason: MID Not Allowed.
Snowman1771 said:
Just tried and it failed, here is what it said.
Error Code: 160.
Error Reason: MID Not Allowed.
Click to expand...
Click to collapse
does your CID say vzw_001 or 111111 or 222222
You may be able to write the cid since you're s-off. Don't hold me to that tho.
jake.corey.jacobs said:
does your CID say vzw_001 or 111111 or 222222
Click to expand...
Click to collapse
The CID says VZW_001.

[Q] somebody show me the right path please

are there anybody can help me to unlock bootloader gain s-off rooted or back to stock rom
flash ruu without any error and fix my wifi
SHOOTER XC SHIP S-ON RL
HBOOT-1.58.0000
eMMC-boot
May 17 2012
software version 2.95.651.5 710RDand baseband version 1.09.00.01.08
hardware version 002
spcs 001
i cannot unlock bootloader via htcdev i've tried more than ten times
C:\Program Files\adt-bundle-windows-x86-20130917\sdk\platform-tools>fastboot fla
sh unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.156s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.000s]
finished. total time: 0.156s
but no splash screen for confirming to unlock, i've tried to run the RUU.exe 2.89.651.2 got error 140,try to flash from sd card with PG86IMG.zip result
main version is older, i check via fastboot my mainver is 2.95 so i try to flash SetmainverLow.zip but i only have
stock recovery not rooted and it wont scan my SD, after that i tried to downgrade hboot with unknownforce method, 2 times with live cd
just sits waiting for device, 3 times with ubuntu 7.04 still the same, 5 times bricked i can unbrick with HTC unbricking project
(the program also did same thing waiting for device but i can manualy reflash my h.boot with emmc_recover after i run dmesg and show me my device actually connected and back again)
i'm stuck now, is there any solution for this?
finally! thank u xda
yippiiii now i can flash to stock ruu 2.89.651.2 after i got ota 2.95.651.5 and skipping mainver problem with temp root, dump misc partition and edit it with winhex..doing for the bootloader with htcdev now, thank u xdaaaaa :laugh:
Finally s-off with juopunutbear hboot 1.58.5858 rooted, downloading MIUI 3.7 rom

Categories

Resources