I recently purchased a used atrix. It worked fine but I wanted to try a different ROM.
Fast forward a little bit and I had rooted, unlocked the bootloader, and setup a recovery.
I downloaded the Neutrino CM7 ROM and put it on my external SD card (possible mistake #1, the thread says use internal).
I went into the recovery on the phone, made a backup of the phone and then went about wiping dalvik, cache, factory-reset, etc.
I then flashed the ROM from zip and some of the addons from the thread. When I went to reboot, the phone sits at the "M Dual Core" screen (I gave it plenty of time for any kind of background "first-boot" stuff and even removed the battery and let it try again). I have wiped and reinstalled the ROM about 4 times now.
I then decided to just go back to my original config and tried to restore from the backup (after wiping). Now after restoring the backup I either get a bootloop, or it will just sit at the "M Dual Core" screen again.
My only solace was that I was able to get into fastboot from the phone, but now after many attempts, it displays "Battery is too low to flash" if I try to enter fastboot. The phone doesn't seem to charge because it just sits at the "M Dual Core" screen whether its plugged into the wall or otherwise.
I am stuck on what to do next. I have access to the recovery, so I thought of trying another ROM, but how can I get those files to the device?
tgeo said:
how can I get those files to the device?
Click to expand...
Click to collapse
You could plug your microSD card to a computer and copy the ROM you want to it. Alternatively, I once saw an option in clockworkmod recovery to mount the sdcard or the internal storage with the phone plugged to a computer via USB. If I recall it correctly, this option is located in the 'mounts and storage' section of the recovery.
MaxK47 said:
You could plug your microSD card to a computer and copy the ROM you want to it. Alternatively, I once saw an option in clockworkmod recovery to mount the sdcard or the internal storage with the phone plugged to a computer via USB. If I recall it correctly, this option is located in the 'mounts and storage' section of the recovery.
Click to expand...
Click to collapse
Thanks. This worked perfectly!
tgeo said:
Thanks. This worked perfectly!
Click to expand...
Click to collapse
And also update your recovery to romracer or cwm touch, you will again get stuck at M logo with an outdated recovery.
Related
Hey guys, i need help badly, i had a custom rom installed that was working just fine, i decided to get some adw launcher themes, i applied some then it crashed, i have tried to do a factory reset, cache reset, etc... Somehow i cant fix this, i tried installing a whole new rom, still wont work for some reason, i had this phone for a month now and nothing happened , i researched tons of threads and nothing. Hopefully someone here knows how to fix this, if you know how please please please tell me!!
thanks in advance
If the computer recognize the phone you can make a re-flash trought LGMDP
Inviato dal mio LG-P500 usando Tapatalk
what is that? im sorry i am noobish :/ i dont really get it , i need noob insructions
well i can access recovery , but when i flash a rom it gives me the same problem
Go back to your baxkup through recovery. Push powr+vol dwn+home. You get into recovery and then choose restore backup.
Sent from my LG-P500 using XDA Premium App
The only problem is, i didnt make a backup.
mrchamsone said:
The only problem is, i didnt make a backup.
Click to expand...
Click to collapse
m also facing the same problem.
My backup was gone when i partitioned my sdcard.
Stuck at LG logo since yesterday..
mrchamsone said:
Hey guys, i need help badly, i had a custom rom installed that was working just fine, i decided to get some adw launcher themes, i applied some then it crashed, i have tried to do a factory reset, cache reset, etc... Somehow i cant fix this, i tried installing a whole new rom, still wont work for some reason, i had this phone for a month now and nothing happened , i researched tons of threads and nothing. Hopefully someone here knows how to fix this, if you know how please please please tell me!!
thanks in advance
Click to expand...
Click to collapse
1.Copy a rom to your SD card.
2.Go to recovery.
3.If amonra: flash debug format system zip in Mik cm thread.
If cwm recovery : go to advanced and format system.
4. Wipe data cache everything and format your ext partition in menus.
5. Now flash the rom zip.
6. Reboot.
Sent from my LG-P500 using Tapatalk
lekhwani said:
1.Copy a rom to your SD card.
2.Go to recovery.
3.If amonra: flash debug format system zip in Mik cm thread.
If cwm recovery : go to advanced and format system.
4. Wipe data cache everything and format your ext partition in menus.
5. Now flash the rom zip.
6. Reboot.
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
i tried that nothing works, all i can do is access the clock work mod recovery thing.
I have an sd card adapter, i can put my sd card in there, would that hlep?
Any rom i do it doesnt work :/
i have a restore option in the recovery, can someone give me the backup file for the lg optimus one? or would that not work?
thanks in advance.
And im going back to school in a few days so i REALLY have to fix it
mrchamsone said:
i tried that nothing works, all i can do is access the clock work mod recovery thing.
Click to expand...
Click to collapse
if you can access clockworkmod recovery, you should still be able to do what lekhwani said. i dont think you get what hes trying to say, so i will say everything step by step
to get the rom onto your phone, you can do either this (longer):
1. plug you sdcard into your adapter. connect your adapter into your computer
2. on your computer, download a rom and move it to your sdcard under directory /sdcard
3. eject the sdcard and put into back into your phone
or this (faster, easier):
1. boot into recovery and plug your phone into the computer
2. under mounts and storage, select mount usb storage
3. on your computer, download and paste the rom of your choice onto your sdcard under directory /sdcard
(skip to number 5)
4. boot your phone into recovery (home+vol down+power)
5. wipe EVERYTHING (if you want your phone to work, you have to do it; on the first menu you see, select all the options that have the word "wipe" in it; after that go into the advanced menu and wipe everything there). vol up is to go up, vol down is to go down. the menu button is to select
6. go back to the first menu and select install zip from sdcard. then select choose zip from sdcard.
7. select the rom, then hit yes (your rom is now being flashed)
8. reboot
sweetnsour said:
if you can access clockworkmod recovery, you should still be able to do what lekhwani said. i dont think you get what hes trying to say, so i will say everything step by step
to get the rom onto your phone, you can do either this (longer):
1. plug you sdcard into your adapter. connect your adapter into your computer
2. on your computer, download a rom and move it to your sdcard under directory /sdcard
3. eject the sdcard and put into back into your phone
or this (faster, easier):
1. boot into recovery and plug your phone into the computer
2. under mounts and storage, select mount usb storage
3. on your computer, download and paste the rom of your choice onto your sdcard under directory /sdcard
(skip to number 5)
4. boot your phone into recovery (home+vol down+power)
5. wipe EVERYTHING (if you want your phone to work, you have to do it; on the first menu you see, select all the options that have the word "wipe" in it; after that go into the advanced menu and wipe everything there). vol up is to go up, vol down is to go down. the menu button is to select
6. go back to the first menu and select install zip from sdcard. then select choose zip from sdcard.
7. select the rom, then hit yes (your rom is now being flashed)
8. reboot
Click to expand...
Click to collapse
so basically thats like installing a rom?
every rom i do doesnt work, it has the same problem, stuck at the lg logo, i wiped cache, cleared everything. im worried if my phone is bricked :/
when im in the cwm recovery menu, i connect the usb cable and it doesnt recognize it, so i use the adapter, and is it normal if the sd card has absaloutely not even one file on it?
as for now, i wouldnt worry about whether your sdcard has any files on it or not. right now, we should be worried about whether your phone can be fixed. have you tried moving a rom onto your sdcard using the adapter? can you see the rom in recovery?
ok thanks, i am downloading a rom right, now. And yes i can see the rom in the recovery menu
ok so the rom is now on my sd card, what do i do from here?
thanks again
OK, i installed the rom, its stuck at the LG logo AGAIN, how long should i wait for it if its first time booting???
someone please reply , i need to fix it as soon as possible and im trying and nothing works.
mrchamsone said:
Hey guys, i need help badly, i had a custom rom installed that was working just fine, i decided to get some adw launcher themes, i applied some then it crashed, i have tried to do a factory reset, cache reset, etc... Somehow i cant fix this, i tried installing a whole new rom, still wont work for some reason, i had this phone for a month now and nothing happened , i researched tons of threads and nothing. Hopefully someone here knows how to fix this, if you know how please please please tell me!!
thanks in advance
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1060121
Try out this thread..I was able to revive my O1 back(from the LG logo stuck problem) jst an hour ago after following the instructions given there..
does that thread work even if you cant boot your phone? it says you have to connect to usb , can i just connect my sd card in an adapter?
mrchamsone said:
does that thread work even if you cant boot your phone? it says you have to connect to usb , can i just connect my sd card in an adapter?
Click to expand...
Click to collapse
Yeah it worked for me..I was also worried abt that.I jst started from no.8 as i could not go beyond the lg logo..
I jst removed the sdcard and connected the phone and flashed the rom from kdz.
O yeah don't forget to disable lg modem.Refer no.6 of the thread.. to disable it.
Stat from no. 8 of the thread after downloading rom and kdz..
ok thank you so much, 1 problem, i put my sd card in the adapter, it said phone was not found, how do i connect my phone to pc if i cant get to the phone itself?
please reply asap
while i am in cwm recovery usb device is not recognized and it says this in the lg updater, phone not found, i tried to find the lg modem thing to disable it but its not there any help would be gladly appreciated
Thanks
mrchamsone said:
while i am in cwm recovery usb device is not recognized and it says this in the lg updater, phone not found, i tried to find the lg modem thing to disable it but its not there any help would be gladly appreciated
Thanks
Click to expand...
Click to collapse
have you installed the usb drivers?
http://forum.xda-developers.com/showpost.php?p=15960064&postcount=3
Ok so im realtively new to working on android phones, just got an atrix, rooted fine, superuser and all bootloader unlocked and stuff, booted into clockwork mod for the first time.
When i did this i clicked on "install update from SD card", chose Greyblur as a test rom cause i seen it on the guide to flash roms, so i followed what they did exacly, when i installed it, i went straight to the "reboot" button, clicked reboot and when it did it wont go past the Dual Core Technology screen, please help me android atrix veterans! i dont have insurance and ive been searching for about a week now, im really scared that im royally screwed, i bought accessories for the phone and want to use them on a non-soft bricked phone!
Please and thanks!
1. Install Romracer's cwm
2. Greyblur is a pseudo-rom, try any rom at the top in the development forum instead. I'm using Nottach's Dark Side right now, it's crazy fast and is very stable.
i have cwm, the problem is i just cant get booted into it without getting on my phone, and launching it via an app i have, is there a way to get on the CWM recovery without an app? cause when i click android recovery it takes me to the stock recovery
Ok, sounds like you installed Tenfar's OLD clockwork recovery, which was only a 'bootstrap' recovery.
What you need to do is, try getting into recovery by doing this:
power off.
press and hold power and vol down buttons until you see 'fastboot' appear on screen. press vol down 7 times until you see 'android recovery' and press vol up key.
This may or may NOT work since you installed the boostrap recovery from Tenfar.
If it DOES work. Do a factory reset. and reboot. See if its fixed.
If not do this:
Download RomRacers Recovery and flash via Fastboot
then do the same button commands to get into Recovery and try to factory reset again.
If none of that works, PM me with your information, such as Android version (froyo, gingerbread, etc etc) and I'll get you sorted.
how do i use fastboot? do i need a program or something on my computer? never touched fastboot before i dont think
Hey i have a similar problem my phone was rooted and an unlocked bootloader using the automatic unlocker and i went to install a rom i believe it was called unofficial aroma rom by th3 bill i went to install it from tenfars cwm and i wiped every thing first and when i went to install the rom it finished in like 5 seconds i pretty new to all this but i thought something was up when it rebooted it wont go past the dual core screen so i went and looked around and found that it could be a kernel issue or a recovery be outdated issue since when i tried to restore my back up on tenfars it still wouldn't go past the dual core screen i then put olmypus cwm on it to see if that wont fix it but i guess that made it worse cus now when i went to go restore I it says error mismatch mdsum so yeah i looked around and read that i can return to stock by flashing a fruitcake but before i did that i thought i should make sure first.hope you guys can help
daftvirus7749 said:
Ok so im realtively new to working on android phones, just got an atrix, rooted fine, superuser and all bootloader unlocked and stuff, booted into clockwork mod for the first time.
When i did this i clicked on "install update from SD card", chose Greyblur as a test rom cause i seen it on the guide to flash roms, so i followed what they did exacly, when i installed it, i went straight to the "reboot" button, clicked reboot and when it did it wont go past the Dual Core Technology screen, please help me android atrix veterans! i dont have insurance and ive been searching for about a week now, im really scared that im royally screwed, i bought accessories for the phone and want to use them on a non-soft bricked phone!
Please and thanks!
Click to expand...
Click to collapse
did you reaaly install it? i mean you should instead select install zip from sd card (not install update).....and do a wipe to factory it helps.....
hope it helps
htchd2fix said:
did you reaaly install it? i mean you should instead select install zip from sd card (not install update).....and do a wipe to factory it helps.....
hope it helps
Click to expand...
Click to collapse
i mean i dont know since it was my first rom but it took like 5 secs and. Did choose install from sd card and i wiped delvik cache,and data.
no install take 5secs. download again your rom in pc
go in recovery
wipe factry reset
go in mount
mount usb
transfer your rom torugh usb into phone sd card ext
when done unmount
go back to install zip from sd card
select your rom
when done reboot
htchd2fix said:
no install take 5secs. download again your rom in pc
go in recovery
wipe factry reset
go in mount
mount usb
transfer your rom torugh usb into phone sd card ext
when done unmount
go back to install zip from sd card
select your rom
when done reboot
Click to expand...
Click to collapse
alright so i did what you said and I'm just guessing the rom just doesnt work for my phone cuz it installed in 5 secs again and i installed a previous version of the rom and it didn't work as well it took me to a rom setup screen like asking me what i want to wipe and what memory to use and then installed pretty quick as well and it didn't boot past the dual core i then whent ahead and flashed the fruit cake rom which is pure stock 1.4.1 and now my phone works...i now have a couple questions do you think it would be smart to back up this rom and keep it as my back up even though its not my real original stock rom? my original one doesn't work it gets a md5 mismatch error or something and doesn't restore.i read some where that tenfars recovery doesnt back u roms properly and that might me why because that what i backed up on should i install rom racer recovery i read that that one is specifically for the atrix if should can you explain how to do that?lastly i stil want to put a custom rom on my phone because the whole reason i did this was because i found out i wasn't getting ics but
each of the two roms i installed never booted up and the only one that worked was the fruit cake do you know a good stable rom to use preferably ics or jellybean?i was also looking into the neutrino v2.9 rom but the linked is down and you need rom racer to install if you cant answer anything i asked please do thanks so far though
daftvirus7749 said:
Ok so im realtively new to working on android phones, just got an atrix, rooted fine, superuser and all bootloader unlocked and stuff, booted into clockwork mod for the first time.
When i did this i clicked on "install update from SD card", chose Greyblur as a test rom cause i seen it on the guide to flash roms, so i followed what they did exacly, when i installed it, i went straight to the "reboot" button, clicked reboot and when it did it wont go past the Dual Core Technology screen, please help me android atrix veterans! i dont have insurance and ive been searching for about a week now, im really scared that im royally screwed, i bought accessories for the phone and want to use them on a non-soft bricked phone!
Please and thanks!
Click to expand...
Click to collapse
go back into recovery by pressing volume down while it's turning on. Then mount sd storage (from recovery) and past into your sdcard an other better rom).Unmount when transfer is complete. WIPE ALL: factory reset, cache and dalvik cache. Install the zip from sdcard. Enjoy
Try formatting data and cache. Format options should be under advanced - mount menu. After formatting your data and cache go to install zip from sdcard and install the new rom. Do wipe data, cache and dalvik cache.
Sent from my Atrix using xda-developers app
This happened to me too, I flashed an up to date cwm and flashed the JB ROM again and that solved my issue, its a strange one!
Sent from my MB860 using xda app-developers app
Been there done that
Been there done that. I was stuck at the M logo for days about a week ago. Couldn't figure it out. Check out my thread here http://forum.xda-developers.com/showthread.php?t=1936337 for how I solved it with help from this forum.
Good luck, I am on epinters latest and greatest CM10 now and it is grand!
ok. I finally decided to root my note 2. i have rooted many phones before, so i am familiar with the process. I used the one click verizon method posted here. Rooted fine. Booted into TWRP (first time using this recovery). wiped cache, etc. Installed rom (paranoidandroid 3). froze at boot screen.
went back to recovery tried to reinstall. same thing. deleted everything through twrp and tried to mount internal card. Nothing. PC wont see it. I can adb and see the device and see it in device manager, but cant see the cards in my computer. can not mount through adb using mount /sdcard, mount /data, etc, says device is busy. cant boot into bootloader to reinstall CWM recovery, etc.
Any suggestions?
Phyllip J FRy said:
ok. I finally decided to root my note 2. i have rooted many phones before, so i am familiar with the process. I used the one click verizon method posted here. Rooted fine. Booted into TWRP (first time using this recovery). wiped cache, etc. Installed rom (paranoidandroid 3). froze at boot screen.
went back to recovery tried to reinstall. same thing. deleted everything through twrp and tried to mount internal card. Nothing. PC wont see it. I can adb and see the device and see it in device manager, but cant see the cards in my computer. can not mount through adb using mount /sdcard, mount /data, etc, says device is busy. cant boot into bootloader to reinstall CWM recovery, etc.
Any suggestions?
Click to expand...
Click to collapse
A lot of the time when booting a rom and it freezes during the boot you can do a battery pull and then power the phone back on again and it'll work.
If you can still get into recovery you could flash CWM, I take you meaning you cant boot into bootloader as meaning you can't boot into recovery though....
Why were you trying to mount the internal storage in TWRP? It's automatically mounted for me every time I boot into recovery.
Can you reach Download Mode? If so you may want to use Odin to go back to stock, using droidstyles guide, and start over again. When you get back to stock just root and unlock again and try this again.
Sent from my SCH-I605 using XDA Premium HD app
Phyllip J FRy said:
ok. I finally decided to root my note 2. i have rooted many phones before, so i am familiar with the process. I used the one click verizon method posted here. Rooted fine. Booted into TWRP (first time using this recovery). wiped cache, etc. Installed rom (paranoidandroid 3). froze at boot screen.
went back to recovery tried to reinstall. same thing. deleted everything through twrp and tried to mount internal card. Nothing. PC wont see it. I can adb and see the device and see it in device manager, but cant see the cards in my computer. can not mount through adb using mount /sdcard, mount /data, etc, says device is busy. cant boot into bootloader to reinstall CWM recovery, etc.
Any suggestions?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2196891
Hello,
I will highly appreciate if somebody can help me.
I wanted to clear my Prime TF201 that's why I used the "Reset device" option in the Menu. After device started again on the screen I see a Clockworkmod recovery v5.8.2.0 menu. And here begins the problem I can't do anything.
When I choose reboot it restarts and I'm back at the main Menu.
When I choose install update from SD card I see only files from the internal memory of the device (although I have deleted them). I've tried to connect to PC but adb said: no device connected.
Generaly I's stuck- no SD card, no USB can be used for recovery file instalation or something like that.
Please help me :crying:
To make this clear: CWM works? Then I suppose you're not fubar.
Have you tried if it shows up in fastboot?
Xerxes-3.0 said:
To make this clear: CWM works? Then I suppose you're not fubar.
Have you tried if it shows up in fastboot?
Click to expand...
Click to collapse
Hi, I don't think it is working since I only see the menu of CWM and none of the options is working. How to try fastboot?
Follow this guide, it worked for me.
Get your downloads and the appropriate ROM and start with the "fastboot devices", then it should show up.
TWRP worked for me and CWM didn't, this is why I recommend it. You can just flash it on top of CWm and it will replace it.
Remember to wipe Dalvik, System, Cache ad Data before installing the other ROM.
/e: I should mention that it did work when I had a non-booting CWM first.
I am trying to install an AOSP rom and stuffed it up. Here's what I did so far. I normally format the internal sdcard when I flash a new daily driver but forgot I haven't put in an external sdcard.
I am currently now in TWRP with no OS. I want to turn the phone off and put in an exernal sdcard to flash a rom. I am just afraid if I turn it off now I won't be able to get back into recovery.
Just wanted to check if this is possible, otherwise I'll leave it on and attempt a sideload and flash a rom that way (still reading up on this if anyone is familiar would appreciate any advice.)
With Windroid
i) Flashed TWRP
ii) Installed SU
With TWRP
formatted dlavik cache etc etc and, very unfortunately, sdcard as well.
Where I am at with sideload
Trying to follow a tutorial (can't link)
Currently I am at the part where I am installing the sdk bundle to get the adb executable.
change to usb storage mode in twrp, and plug to your pc, copy rom to phone, unmount usb storage mode, flash the rom
Pendekar7 said:
change to usb storage mode in twrp, and plug to your pc, copy rom to phone, unmount usb storage mode, flash the rom
Click to expand...
Click to collapse
Sweet much easier than I thought, what a time to be alive...
ROM currently installing, hope all is good.
Thanks again!
Edit: Also, is it weird that when I press reboot system in TWRP (after the ROM installed) nothing happens? It just stays there. This also happened when I installed SU, I had to take my battery out to reset it and SU was there when it booted back on.
I previously used CWM so a bit new to TWRP.
frogduck said:
Sweet much easier than I thought, what a time to be alive...
ROM currently installing, hope all is good.
Thanks again!
Edit: Also, is it weird that when I press reboot system in TWRP (after the ROM installed) nothing happens? It just stays there. This also happened when I installed SU, I had to take my battery out to reset it and SU was there when it booted back on.
I previously used CWM so a bit new to TWRP.
Click to expand...
Click to collapse
yeah that bug, sometime twrp will freeze while select reboot via twrp menu, happened to me too