Hey Guys,
I know if I search deep enough I will likely find the answer I'm looking for but I've been unsuccessful so far and unfortunately have a tight time limit as I will be traveling abroad very soon...I'm sure this will be pretty easy to answer for the pros on here....
Anyway, Here's my question: I currently have an ATT Galaxy Note with the stock gingerbread rom installed. I've rooted the ROM and done the trick to enable Wifi tethering. I want to get the ATT ICS rom via kies on the phone but I'm not quite sure what the proper procedure is to do it without potentially causing any problems...Should I unroot the phone first? Do I have to restore back to stock? What do you recommend, thanks very much in advance for your help!
Sizzip said:
Hey Guys,
I know if I search deep enough I will likely find the answer I'm looking for but I've been unsuccessful so far and unfortunately have a tight time limit as I will be traveling abroad very soon...I'm sure this will be pretty easy to answer for the pros on here....
Anyway, Here's my question: I currently have an ATT Galaxy Note with the stock gingerbread rom installed. I've rooted the ROM and done the trick to enable Wifi tethering. I want to get the ATT ICS rom via kies on the phone but I'm not quite sure what the proper procedure is to do it without potentially causing any problems...Should I unroot the phone first? Do I have to restore back to stock? What do you recommend, thanks very much in advance for your help!
Click to expand...
Click to collapse
Backup device onto SD or PC first then,
1) Turn Off Device
2) Don't connect the device yet
3) Launch Kies on your desktop (full version)
4) Choose Tools, Firmware upgrade & initialization
a) Pull battery and enter the model name & S/N (ALL CAPS NO DASH!!)
b) Replace battery and boot into download mode
c) connect USB
d) It will prompt to initialize to original settings. Click "YES"
e) It will prompt to initialize the latest version. Click "YES"
f) It will download the firmware upgrade components (DO NOT DISCONNECT THE DEVICE!!)
5) It will prompt for firmware upgrade and initialization.
a) Click check box for reading above information
b) Click your choice if you want your information saved on Samsung Kies corporate servers.
Why would you want that crap version of ICS? We've all moved on to jelly bean
johnrippa said:
Why would you want that crap version of ICS? We've all moved on to jelly bean
Click to expand...
Click to collapse
Well, truth be told, it's for my father's Galaxy Note. I just want something stable that'll give him the least amount of problems. It's not very likely that i'll be keen to update it much... The only "mod" I'd likely do/need is the wifi-tethering hack. With that in mind, do you still recommend I go Jellybean? If so, which rom do I use...Thanks!
If you Want a stable and reliable build to travel with ....
Stay with ICS or GB stock rooted rom, IMHO
Ihmo ICS would be best for your father's phone.
JB is nice but still being developed for the ATT Note so you will get problems.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Alright guys, thanks a lot for your help/suggestions...I really appreciate it!
johnrippa said:
Why would you want that crap version of ICS? We've all moved on to jelly bean
Click to expand...
Click to collapse
Because JB is still at alpha quality for the most part ....
And like me ....many users require a stable and reliable build to conduct their daily affairs, without the worry of random reboots, missing APN's, dropped calls, and missing functionality .
We all have "not " moved on to jelly bean, simply put...as it currently has some severe issues that must be worked out before any semblance of stable function can be had.
It will happen, just as soon as samsung releases a true JB build for the note 1...if they ever do ....g
Thanks
I had the same question... glad I didn't have to download the huge ATT stock ROM.
I'll try this method here tonight.
While downloading, I'm getting a time out... happened twice. When is the best time to do this? Server must be busy.
Finally, the procedure worked. Took ~3 hours... scared it was going to time-out again.
gregsarg said:
Because JB is still at alpha quality for the most part ....
And like me ....many users require a stable and reliable build to conduct their daily affairs, without the worry of random reboots, missing APN's, dropped calls, and missing functionality .
We all have "not " moved on to jelly bean, simply put...as it currently has some severe issues that must be worked out before any semblance of stable function can be had.
It will happen, just as soon as samsung releases a true JB build for the note 1...if they ever do ....g
Click to expand...
Click to collapse
You obviously haven't tried the PA builds. They've been stable since d-day+ 2 weeks, and with the exception of the flicker issue, and which was fixed by checking a box in the developer settings panel.
Sent from my SAMSUNG-SGH-I717 using XDA Premium HD app
Related
My girlfriend asked me to turn off LTE to save battery and I remembered reading that you need a custom kernel to do that.
So, start from her stock ICS, how should I proceed?
The "Road and Ref Map" post seems to say that I should first flash CWM thru Odin then flash SU, is this the correct way to root now?
Then... which kernel shall I flash to be able to turn off LTE? Or do I actually need a custon ROM? I'm fine with flashing stuff since I've been playing with a Droid X for a year, but I'm not sure she'll agree to flash any ROM other than the stock...
Thank you very much!
kinnerful said:
My girlfriend asked me to turn off LTE to save battery and I remembered reading that you need a custom kernel to do that.
So, start from her stock ICS, how should I proceed?
The "Road and Ref Map" post seems to say that I should first flash CWM thru Odin then flash SU, is this the correct way to root now?
Then... which kernel shall I flash to be able to turn off LTE? Or do I actually need a custon ROM? I'm fine with flashing stuff since I've been playing with a Droid X for a year, but I'm not sure she'll agree to flash any ROM other than the stock...
Thank you very much!
Click to expand...
Click to collapse
You are on the right track. ..
Read read read! !!
The process is solid, but "your " knowledge is the key to a flawless root.
Take notes of the process and get your pc environment ready and then your good to go! !
Once rooted a custom rom is needed to control network...however it may be possible to toggle off the LTE function without root using a network code. ..unless you want root also. ...(i would )
Rooted custom roms are awesome. ...and i prefer the UCLF6 build from FlappJaxxx.
For code options, you'll need another user to help as i don't have them. ...and im not sure it will even work.
There are many great members here that are willing to help. ..
And i hope I've helped you today. ..g
:good:
The stock at&t modem is locked so users cannot mess with it. If you key *#2263# you will see.
The stock Rogers modem is not restricted. Using the dialer code it is theoretically possible to toggle 4g/3//2g. To me that means it could be possible to use one of the widgets in the market to toggle. But for some reason the phone slows to a crawl after flashing this modem.
Most of the roms in the development section don't have the toggle for 4g/3g/2g. I say most because there might be one that does but I've never seen anyone mention this feature.
I would like more input here because this could give better battery performance.
Thank you all for the info! Maybe I'll just root and install some sort of stock rooted ROMs instead.
The battery life got dramatically worse after the ICS OTA: it could last a day without problem before, but now it died in the middle of her working day. I tried Better Battery Stat and found that AlarmManager kept the phone awake almost all the time, which to my knowledge didn't point to any specific problem.
Could battery life be better just by installing a debloated stock rooted ROM?
Try flashing the Canadian ROM with the Canadian radio together. It is unbranded and will look almost exactly like the ATT ROM. I have been using the complete package together (my version, not sam's version) and have experienced no slowdown experiences. I am on ATT however my phone is a Rogers Note and not an ATT note. Some users have reported a slowdown issue with the ATT I717 and a Canadian modem.
http://forum.xda-developers.com/showthread.php?t=1801689
What ^^^^^^^^^ said ....g
Under stock gingerbread I was able to turn off/on LTE with the menu when code *#*#4636#*#* was dialed, but under ICS, that no longer works
rangercaptain said:
The stock at&t modem is locked so users cannot mess with it. If you key *#2263# you will see.
The stock Rogers modem is not restricted. Using the dialer code it is theoretically possible to toggle 4g/3//2g. To me that means it could be possible to use one of the widgets in the market to toggle. But for some reason the phone slows to a crawl after flashing this modem.
Most of the roms in the development section don't have the toggle for 4g/3g/2g. I say most because there might be one that does but I've never seen anyone mention this feature.
I would like more input here because this could give better battery performance.
Click to expand...
Click to collapse
I am going to try Agoattamer's suggestion. I will post the steps and links if it does what we want.
I just updated my vibrant from stock froyo to stock gb via kies factory upgrade.
Here are specifics as is: firmware 2.3.6 baseband t959VUVKJ6 kernel 2.6.35.7-t959VUVKJ6-CL694130 build GINGERBREAD.VUVKJ6
I went through hell today to root and unlock the sim of this phone as its my first day ever messing with android phones.
I was looking at the wiki for the t-959 roms, the "stable" one is barebones and the "cutting edge" one is CyanogenMod 7.2. Barebones pretty much hints you lose functionality and though the other is apparently great, it isn't "stable" and here and there you read a post here and there of someone having some kind of trouble with a feature that just might have worked with the factory rom.
I don't want to sacrifice factory functionality for a phone that looks good or is too modern for the vibrant to handle, I want a rom where I will have no issues whatsoever with things like mms, camera, ics, gps, wifi / 3g sip w & w/o bluetooth (w sipdroid), tethering, installing to sd, that has a promise of performing well for a good while and ideally for the rest of the life of the phone without having to possibly upgrade again.
It seems my best bet is to either just leave my phone as is or go with barebones and install apps as NEEDED, please help, you learn alot in the forum but also you run across soo many contradictions, alternatives and options that its too confusing and time consuming, really, I just want to do this once, quick and get it over with, bam bam bam, done and hopefully never have to mess with it again until it gets smashed or I loose it.
oh another thing, though this phone is rooted unless I insert an SD I can't browse ANY files, either via its ui or via usb... I have a captivate where I can see both sd internal and external via both ui and usb, I'm assuming its a rom issue that once I upgrade to any rom that will be solved.
Well cm7.2 is based on gingerbread which you said you have. It is pretty stable except for possible GPS and 911 issues. Cm9 is based on ICS, its also pretty stable but same possible issues. CM10 is based on jellybean, its in alpha build but considering its fairly stable except for same two issues. As far as looking at files, you need root browser or root explore. Just DL from market. I'm running Der Teufel's Hellybean cm10 ROM. Its really nice. But you said you want to set and forget....ICZen is a good ICS ROM. Its pretty stable and a lot more up to date than gingerbread.
Sent from my SGH-T959 using xda premium
mikeo1313 said:
I just updated my vibrant from stock froyo to stock gb via kies factory upgrade.
Here are specifics as is: firmware 2.3.6 baseband t959VUVKJ6 kernel 2.6.35.7-t959VUVKJ6-CL694130 build GINGERBREAD.VUVKJ6
Click to expand...
Click to collapse
Seeing that this is your first experience with Android, I would say that you need to make sure that you know what you are doing first before you start flashing anything. I am going to save you some serious heartache in just one minute.
First, Kies is notorious for HardBricking phones. Don't use it. You can use Odin or Heimdall to flash back to "stock" whenever you need to. Always good to do when flashing ROMs to have a clean base to start with. Google them and you will find what you need.
And now, here is where I am going to save you tons of trouble and the painstaking issues that WILL lie in your future. When I say that you need to know what you are doing before you start flashing, here is why. YOU DO NOT HAVE A VIBRANT, so don't flash any Vibrant ROMs to your phone. First we never got an official GB ROM, only Froyo. Second the builds that you put up there are to the SHG-T959V. That is the 4g version. Those ROMs won't work in the Vibrant and our ROMs won't work on theirs. Fortunately there is a forum for those and you will find whatever you need in there.
Good luck and be careful and above all read, read, read.
Hey wood, this is the second person I have seen stating they had stock GB on a vibrant. I thought it was weird. I figure if you are not sure what phone you have or what OS your running you shouldn't try to install custom ROM! Thanks for saving that guy!
drool on my chin from a mouth full of jellybeans
You survived kies. That is awesome. But hellybean is awesome.
Sent from my Jellied out Vibrant sandwich.
Check out the Hellybean nightlies Here and here and the Devil Kernel for ICS here and Jelly Bean here for the Galaxy S and variants.
oh noes!
Woody said:
Seeing that this is your first experience with Android, I would say that you need to make sure that you know what you are doing first before you start flashing anything. I am going to save you some serious heartache in just one minute.
First, Kies is notorious for HardBricking phones. Don't use it. You can use Odin or Heimdall to flash back to "stock" whenever you need to. Always good to do when flashing ROMs to have a clean base to start with. Google them and you will find what you need.
And now, here is where I am going to save you tons of trouble and the painstaking issues that WILL lie in your future. When I say that you need to know what you are doing before you start flashing, here is why. YOU DO NOT HAVE A VIBRANT, so don't flash any Vibrant ROMs to your phone. First we never got an official GB ROM, only Froyo. Second the builds that you put up there are to the SHG-T959V. That is the 4g version. Those ROMs won't work in the Vibrant and our ROMs won't work on theirs. Fortunately there is a forum for those and you will find whatever you need in there.
Good luck and be careful and above all read, read, read.
Click to expand...
Click to collapse
THe wiki for this with files neded seems to be mostly dead.
I took my tmo g s 4g and upated it with kies mini. it now has t959vuvkj6-cl694130 and I cannot find how to root but have been reading for daaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaays
Searching forums is cumbersome at best.
Does anyone know where accurate and fresh data is on how to root and use cm10 or any other help for non experts?
I guess I have to use a pc because there is crap info for mac
tanks
You are in the wrong section, this is for t959 not t959v. Here is a thread with all your answers and I believe you can use your Mac http://forum.xda-developers.com/showthread.php?p=21953587
Sent from my SCH-I535 using xda premium
samsgun357 said:
You are in the wrong section, this is for t959 not t959v. Here is a thread with all your answers and I believe you can use your Mac http://forum.xda-developers.com/showthread.php?p=21953587
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Thanks, unfortunately super one click is reported as a virus and also doesn't work on mac.
Personally, I would skip any ICS roms entirely. The risk of getting the EU bug (dead internal memory) isn't worth it. Go straight to JB.
Hi
I rooted my 6 month old S3 this week to get Jelly Bean as TMobile UK aren't releasing it until March by the looks of things.
Rooted the phone no trouble and installed the official Samsung 4.1.2 OS on the phone which is working perfectly.
However, I've just discovered it's not possible to use Sky Go, which I use every day, on a rooted phone. Judging by other peoples questions and posts about it, there's no work around for it either.
What I want to do is remove the root access to my phone and return it to normal, but keep Jelly Bean. I've no interest in or use for having the root access, it was just to get JB.
Is there an easy way to restore this? I'm hoping there's a nice straightforward way of doing it as I've got the official Samsung OS rather than a custom one.
Thanks!
Try triangle away. You might have to do a wipe to get "normal" device status
Sent from my GT-I9300 using xda premium
xcly said:
Try triangle away. You might have to do a wipe to get "normal" device status
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
nope doesn't work I'm afraid.
Then try flashing the same firmware? Should leave it unrooted. I'm not sure if sky go checks device status when checking for root.
Sent from my GT-I9300 using xda premium
cgfw201 said:
Hi
I rooted my 6 month old S3 this week to get Jelly Bean as TMobile UK aren't releasing it until March by the looks of things.
Rooted the phone no trouble and installed the official Samsung 4.1.2 OS on the phone which is working perfectly.
However, I've just discovered it's not possible to use Sky Go, which I use every day, on a rooted phone. Judging by other peoples questions and posts about it, there's no work around for it either.
What I want to do is remove the root access to my phone and return it to normal, but keep Jelly Bean. I've no interest in or use for having the root access, it was just to get JB.
Is there an easy way to restore this? I'm hoping there's a nice straightforward way of doing it as I've got the official Samsung OS rather than a custom one.
Thanks!
Click to expand...
Click to collapse
This will help you:
1. Open SuperSU App
2. Go to settings tab
3. Scroll down
4. Click Full unroot
5. Click continue
6. That's it, done!
7. Come back here and click thanks! :silly:
Hi,
I'm very sorry if the problem was in other topic, but I looked first 10-12 pages of topics and couldn't find anything. My wive's Motorola RAZR MAXX (european, retail,non-carrier) is still on ICS, newest software availible, but from time to time get massive battery drain from process called Multimedia. Fully charged phone can run out of battery in few hours, get hot like from the furnace and finally turn off out of "juice". We are aware of the problem, that this single process is draining the battery, since we've looked at battery manager and this process is beeing constantly restarting, causing 100% CPU usage and draining battery. Forced-close helps, but this process manage to restart in background and it's stupid to constantly closing it in task manager every time after finishing some tasks that trigger him to start again. So, are there any temporary solutions for this? Is Motorola aware of the problem and will fix this in upcoming JB update? And finally, when EU versions of RAZR/MAXX get official JB update?
Regards, Jacek
Baronik said:
Hi,
I'm very sorry if the problem was in other topic, but I looked first 10-12 pages of topics and couldn't find anything. My wive's Motorola RAZR MAXX (european, retail,non-carrier) is still on ICS, newest software availible, but from time to time get massive battery drain from process called Multimedia. Fully charged phone can run out of battery in few hours, get hot like from the furnace and finally turn off out of "juice". We are aware of the problem, that this single process is draining the battery, since we've looked at battery manager and this process is beeing constantly restarting, causing 100% CPU usage and draining battery. Forced-close helps, but this process manage to restart in background and it's stupid to constantly closing it in task manager every time after finishing some tasks that trigger him to start again. So, are there any temporary solutions for this? Is Motorola aware of the problem and will fix this in upcoming JB update? And finally, when EU versions of RAZR/MAXX get official JB update?
Regards, Jacek
Click to expand...
Click to collapse
read more in this forum about this phone, the EU versions got the jelly bean update
Do a full wipe from stock recoveru and ser if the problembis gone...
Sent from my XT910 using xda premium
TheMrcool212 said:
read more in this forum about this phone, the EU versions got the jelly bean update
Click to expand...
Click to collapse
Well, If you say so - yesterday I've checked update and had information, that my software is up to date.
Baronik said:
Well, If you say so - yesterday I've checked update and had information, that my software is up to date.
Click to expand...
Click to collapse
i know, that happened to me also, but not all people get the update from the settings, so you need to flash it manually from stock recovery
here's the link for the jelly bean update:
http://forum.xda-developers.com/showthread.php?t=2192532
TheMrcool212 said:
i know, that happened to me also, but not all people get the update from the settings, so you need to flash it manually from stock recovery
here's the link for the jelly bean update:
http://forum.xda-developers.com/showthread.php?t=2192532
Click to expand...
Click to collapse
I'm really aprreciate the help, but this firmware seems to be a leak, not the official one, so I won't risk bricking phone (wife's), especially, we've got iMac, so no windows program work on it (I presume it's needed for forced flashing via recovery) and I've never done any rooting/flashing myself. I'll have to wait for official update via OTA.
But you've mentioned, that you're familiar with the problem - was it fixed with the JB update in your case?
Baronik said:
I'll have to wait for official update via OTA.
Click to expand...
Click to collapse
This may not come.
Only few ROM are updated via OTA: Retail.en.FR, Retail.en.EU, Retail.en.AU, Vodafone.en.EU.
And I think your ROM version is not one of them :/
You need to change ICS to one of upper ROM, and then you can take JB update.
tie7 said:
This may not come.
Only few ROM are updated via OTA: Retail.en.FR, Retail.en.EU, Retail.en.AU, Vodafone.en.EU.
And I think your ROM version is not one of them :/
You need to change ICS to one of upper ROM, and then you can take JB update.
Click to expand...
Click to collapse
Now wife has rom 672.180.41.XT910.NonEFIGSRetail.en.EU - why do You think this Rom won't be updated any time soon? I bought this phone from normal store, it has motorola warranty (non-carrier, it's not imported from foreign country), I live in Poland. If you're right how can I make the update SAFELY on on iMac? Is it possible? The problem is getting stronger everyday - process activating himself randomly and sometimes it's too late to switch it off before it do some damage to battery. It's bloody anoying!
I'm sure that ROM 672.180.41.XT910.NonEFIGSRetail.en.EU won't be updated to JB - This device will remain on Android 4.0.4 (ICS)
You can confirm that at Motorola website (Select Poland and Retail, then Motorola Razr phone):
https://motorola-global-en-roe.custhelp.com/app/software-upgrade-news/g_id/1995
You need to change ICS to one of updated ROM(Retail.en.FR, Retail.en.EU, Retail.en.AU, Vodafone.en.EU), and then you can take JB update.
If you are from Poland you can also check this thread:
http://forum.android.com.pl/f472/ro...-europy-a-aktualizacja-przez-recovery-276361/
tie7 said:
I'm sure that ROM 672.180.41.XT910.NonEFIGSRetail.en.EU won't be updated to JB - This device will remain on Android 4.0.4 (ICS)
You can confirm that at Motorola website (Select Poland and Retail, then Motorola Razr phone):
https://motorola-global-en-roe.custhelp.com/app/software-upgrade-news/g_id/1995
You need to change ICS to one of updated ROM(Retail.en.FR, Retail.en.EU, Retail.en.AU, Vodafone.en.EU), and then you can take JB update.
If you are from Poland you can also check this thread:
http://forum.android.com.pl/f472/ro...-europy-a-aktualizacja-przez-recovery-276361/
Click to expand...
Click to collapse
Yeah, from what I found the phone won't get official OTA update - Motorola SUXX, won't buy any other phone from them, ever. I can't do flashing on Mac, even if I want.. Wife will be sooo disapointed, must find solution to this drain other way. Factory reset?
Baronik said:
I can't do flashing on Mac, even if I want..
Click to expand...
Click to collapse
I'm not sure, I think you can do that, but you need ask someone else because I'm not good in this.
Baronik said:
Factory reset?
Click to expand...
Click to collapse
I think it's not enough.
As I know you must root your ICS, install Safestrap, install new ICS(one of Retail.en.FR, Retail.en.EU, Retail.en.AU, Vodafone.en.EU), root new ICS, install voodoo ota root keeper and buckup root, install JB update, I think this would look something like this.
tie7 said:
I think it's not enough.
As I know you must root your ICS, install Safestrap, install new ICS(one of Retail.en.FR, Retail.en.EU, Retail.en.AU, Vodafone.en.EU), root new ICS, install voodoo ota root keeper and buckup root, install JB update, I think this would look something like this.
Click to expand...
Click to collapse
Why rooting? Does just installing retail version of ICS and then doing OTA update to JB won't work?
Baronik said:
Why rooting? Does just installing retail version of ICS and then doing OTA update to JB won't work?
Click to expand...
Click to collapse
I don't think you can just install other version of ICS without rooting.
Well, it’s looks like I’m ****ed up #$% I can’t update without rooting, I can’t root and update because there is no Mac tools for doing this, Motorola won’t plan to update RAZR/MAXX in my third world country to JB (get confirmation from support), and even if I’ll ask someone to make an update for me (if I found someone from near my location who know how to do this without bricking the phone) I still loose warranty because rooting void warranty. If I know all of this earlier I wold have never buy moto phone. Support guy told me that the only thing I can do is to make a factory reset, and if it won’t solve the problem give the phone to warranty. Either way I don’t have many options here – will try to reset phone first, it doesn’t take much time and doesn’t hurt.
But have one more question (maybe lame, but I’ve never done rooting) – since the rooting void warranty, is it possible to make an update to retail.UK JB and then COMPLETELY remove root with any trails it was on phone? So I won’t lost warranty and have newest software? If yes, then it will make sense to look for someone to help me with the whole update process.
Baronik said:
Well, it’s looks like I’m ****ed up #$% I can’t update without rooting, I can’t root and update because there is no Mac tools for doing this, Motorola won’t plan to update RAZR/MAXX in my third world country to JB (get confirmation from support), and even if I’ll ask someone to make an update for me (if I found someone from near my location who know how to do this without bricking the phone) I still loose warranty because rooting void warranty. If I know all of this earlier I wold have never buy moto phone. Support guy told me that the only thing I can do is to make a factory reset, and if it won’t solve the problem give the phone to warranty. Either way I don’t have many options here – will try to reset phone first, it doesn’t take much time and doesn’t hurt.
But have one more question (maybe lame, but I’ve never done rooting) – since the rooting void warranty, is it possible to make an update to retail.UK JB and then COMPLETELY remove root with any trails it was on phone? So I won’t lost warranty and have newest software? If yes, then it will make sense to look for someone to help me with the whole update process.
Click to expand...
Click to collapse
You dont need root to update, but you will need windows to flash the retail.eu ics flash the ota in the stock recovery
TheMrcool212 said:
You dont need root to update, but you will need windows to flash the retail.eu ics flash the ota in the stock recovery
Click to expand...
Click to collapse
Well, friend in the earlier posts said I can't update without the root, so I'm confused. If you're right, that I'm halfway to update, since I won't void warranty updating without root. Then I have to find someone with the knowlende how to do this and PC to actually do this.
TheMrcool212 said:
You dont need root to update, but you will need windows to flash the retail.eu ics flash the ota in the stock recovery
Click to expand...
Click to collapse
You are sure, that to flash to other version of ICS, there is no need of root?
Baronik said:
Well, friend in the earlier posts said I can't update without the root, so I'm confused. If you're right, that I'm halfway to update, since I won't void warranty updating without root. Then I have to find someone with the knowlende how to do this and PC to actually do this.
Click to expand...
Click to collapse
Take alook in the dev section and search rsdlite with this tool you can flash 672.180.41.en.eu (fastboot file has a different name)
There are many threads on how to
Then you upgrade to JB
Root is not needed for any of this
dude there will be some big media file on ur SD card which would be not able to read like in my case there was 1.4gb mkv video file which was not readable by mediaproces so it was constantly trying to update the gallery so becuase of such files which are unreadble causes media process to constantly run.....so check ur SD card whether u have any such file...if no then search for dev section for root and flash JB rom....
marconz said:
Take alook in the dev section and search rsdlite with this tool you can flash 672.180.41.en.eu (fastboot file has a different name)
Click to expand...
Click to collapse
Can you read I don't have a PC (got iMac) and those tools doesn't work on OSX?
I've been running CyanogenMod 11 for about a month now. I like it a lot, however there are instabilities. Youtube cannot play videos at all, for example; Snapchat totally fails to work; and one or two apps I've tried to install wouldn't even open. Occasionally a program will crash with a "Such-and such service has stopped" error notice.
Can anyone suggest a more stable ROM? I'm a newbie to flashing, I'm not experienced or interested in trying out different ROMs. I'm not a power user, I just want a stable, reliable ROM. Is cm11 known to have the issues I'm experiencing? Can anyone suggest an alternative?
Thanks.
AidanBell said:
I've been running CyanogenMod 11 for about a month now. I like it a lot, however there are instabilities. Youtube cannot play videos at all, for example; Snapchat totally fails to work; and one or two apps I've tried to install wouldn't even open. Occasionally a program will crash with a "Such-and such service has stopped" error notice.
Can anyone suggest a more stable ROM? I'm a newbie to flashing, I'm not experienced or interested in trying out different ROMs. I'm not a power user, I just want a stable, reliable ROM. Is cm11 known to have the issues I'm experiencing? Can anyone suggest an alternative?
Thanks.
Click to expand...
Click to collapse
megalomanic14's MegaFire ROM works great. http://forum.xda-developers.com/showthread.php?t=2608110
AidanBell said:
I've been running CyanogenMod 11 for about a month now. I like it a lot, however there are instabilities. Youtube cannot play videos at all, for example; Snapchat totally fails to work; and one or two apps I've tried to install wouldn't even open. Occasionally a program will crash with a "Such-and such service has stopped" error notice.
Can anyone suggest a more stable ROM? I'm a newbie to flashing, I'm not experienced or interested in trying out different ROMs. I'm not a power user, I just want a stable, reliable ROM. Is cm11 known to have the issues I'm experiencing? Can anyone suggest an alternative?
Thanks.
Click to expand...
Click to collapse
Since cm-11.0 for this device is not in nightlies major bugs should be expected. Sorry, I don't have a suggestion, but I have a question. Does the headphone jack work on cm11?
interloper said:
Since cm-11.0 for this device is not in nightlies major bugs should be expected. Sorry, I don't have a suggestion, but I have a question. Does the headphone jack work on cm11?
Click to expand...
Click to collapse
Yes, the headphone jack works fine.
I've made the decision to return to the official Samsung ROM, so if anybody could point me in the direction of a safe, reliable download for that I'd be very grateful.
Incidentally, what's "nightlies "?
AidanBell said:
Yes, the headphone jack works fine.
I've made the decision to return to the official Samsung ROM, so if anybody could point me in the direction of a safe, reliable download for that I'd be very grateful.
Incidentally, what's "nightlies "?
Click to expand...
Click to collapse
Nightly is the first "Official" status of a device from CM. If the device is very stable, with all system working properly and with minimal buggy behaviors CM begins building the ROM officially as a "Nightly" assuming the dev is following best practices etc.
AidanBell said:
Yes, the headphone jack works fine.
I've made the decision to return to the official Samsung ROM, so if anybody could point me in the direction of a safe, reliable download for that I'd be very grateful.
Incidentally, what's "nightlies "?
Click to expand...
Click to collapse
I don't think that anyone has the stock rom for the Mega(s) yet, waiting patiently for the guys upstairs to crack the bootloader.
however you might try to restore with Kies.
Unicorn69 said:
I don't think that anyone has the stock rom for the Mega(s) yet, waiting patiently for the guys upstairs to crack the bootloader.
however you might try to restore with Kies.
Click to expand...
Click to collapse
You are not right, I for instance have stock ROM on my Mega and I am quite satisfied... Ohhh, maybe I'm a little lying... :silly: it is MegaFireMj2V5 from megalomanic14 which is based upon a stock ROM but is greatly improved - if you are looking for alternative to stock or CM11 rom's it's worth a shot.
As for return to stock ROM - be careful to choose right version: all new firmware (beginning from CNA1) are 'enhanced' with new bootloader and Samsung KIES which is new security system. If you upgrade your Mega by Kies or by Odin with newest firmware you will be lacked possibility to downgrade AND every attempt to root or flash custom recovery will result in tipping flashing counter without any possibility to clear it. So be extremely cautious if you want to mod your Mega with no problems.
You can choose older firmware on Sammobile an flash it thru Odin - then you will have fresh stock ROM on your unit. There are many tutorials how to do it.
trurl3 said:
You are not right, I for instance have stock ROM on my Mega and I am quite satisfied... Ohhh, maybe I'm a little lying... :silly: it is MegaFireMj2V5 from megalomanic14 which is based upon a stock ROM but is greatly improved - if you are looking for alternative to stock or CM11 rom's it's worth a shot.
As for return to stock ROM - be careful to choose right version: all new firmware (beginning from CNA1) are 'enhanced' with new bootloader and Samsung KIES which is new security system. If you upgrade your Mega by Kies or by Odin with newest firmware you will be lacked possibility to downgrade AND every attempt to root or flash custom recovery will result in tipping flashing counter without any possibility to clear it. So be extremely cautious if you want to mod your Mega with no problems.
You can choose older firmware on Sammobile an flash it thru Odin - then you will have fresh stock ROM on your unit. There are many tutorials how to do it.
Click to expand...
Click to collapse
Many thanks, guys.
I've been on Sammobile and selected "I9205XXUCNA2_I9205BTUCNA1_BTU.zip", which I intend to install in the next couple of hours unless anyone on here screams at me that I shouldn't! I'm in the UK with a GT-i9250, so I believe that's the right version for me.
To be honest, I'm not worried about tipping the flashing counter (if I even understand properly what that means). I rooted my phone some time ago, and liked that. Two weeks ago I decided to try Cyanogenmod since I've never used a different ROM. I wasn't impressed, and have decided I want to go back to Samsung original. If, in the process, I prevent myself from ever being able to flash another alternative ROM, or I void the phone's warrenty in any way, I can live with that.
AidanBell said:
Many thanks, guys.
I've been on Sammobile and selected "I9205XXUCNA2_I9205BTUCNA1_BTU.zip", which I intend to install in the next couple of hours unless anyone on here screams at me that I shouldn't! I'm in the UK with a GT-i9250, so I believe that's the right version for me.
To be honest, I'm not worried about tipping the flashing counter (if I even understand properly what that means). I rooted my phone some time ago, and liked that. Two weeks ago I decided to try Cyanogenmod since I've never used a different ROM. I wasn't impressed, and have decided I want to go back to Samsung original. If, in the process, I prevent myself from ever being able to flash another alternative ROM, or I void the phone's warrenty in any way, I can live with that.
Click to expand...
Click to collapse
OK, it's your choice... in fact newest firmware do not offer nothing new but bootloder without return and KNOX. CNA2 it's firmware with KNOX embedded. For mundane user this means nothing special, but for somebody who plan to root and mod it could be pain in... Try to read a little about rooting firmware with KNOX... but as I said, you are warned... tipping counter means setting flag which shows to e.g. service so there was installed unofficial software and it means so you are lacking your warranty. With firmware with KNOX this is irreversible because setting such flag physically burns efuse in system making hardware change. Cheers...
I stay on firmware without KNOX because of possibility to change ROMs and easy install custom software. Waiting for KK which for sure will have 'new type' bootloader and then will be no choice...
trurl3 said:
OK, it's your choice... in fact newest firmware do not offer nothing new but bootloder without return and KNOX. CNA2 it's firmware with KNOX embedded. For mundane user this means nothing special, but for somebody who plan to root and mod it could be pain in... Try to read a little about rooting firmware with KNOX... but as I said, you are warned... tipping counter means setting flag which shows to e.g. service so there was installed unofficial software and it means so you are lacking your warranty. With firmware with KNOX this is irreversible because setting such flag physically burns efuse in system making hardware change. Cheers...
I stay on firmware without KNOX because of possibility to change ROMs and easy install custom software. Waiting for KK which for sure will have 'new type' bootloader and then will be no choice...
Click to expand...
Click to collapse
You make a good case, and perhaps I should install an earlier version, then. Thanks. However, I've looked on Sammobile and they seem to offer only the latest version. Where can I download an earlier KNOX-free version, please?
trurl3 said:
OK, it's your choice... in fact newest firmware do not offer nothing new but bootloder without return and KNOX. CNA2 it's firmware with KNOX embedded. For mundane user this means nothing special, but for somebody who plan to root and mod it could be pain in... Try to read a little about rooting firmware with KNOX... but as I said, you are warned... tipping counter means setting flag which shows to e.g. service so there was installed unofficial software and it means so you are lacking your warranty. With firmware with KNOX this is irreversible because setting such flag physically burns efuse in system making hardware change. Cheers...
I stay on firmware without KNOX because of possibility to change ROMs and easy install custom software. Waiting for KK which for sure will have 'new type' bootloader and then will be no choice...
Click to expand...
Click to collapse
Like you,i still stay on old firmware,new firmware have knox,knox make your phone brick if you root.
rizky123 said:
Like you,i still stay on old firmware,new firmware have knox,knox make your phone brick if you root.
Click to expand...
Click to collapse
Agreed. You guys have convinced me that I should be flashing an old version of Samsung, not the latest with KNOX. But I can only do that if I can find one! Can anyone please point me in the right direction?
AidanBell said:
You make a good case, and perhaps I should install an earlier version, then. Thanks. However, I've looked on Sammobile and they seem to offer only the latest version. Where can I download an earlier KNOX-free version, please?
Click to expand...
Click to collapse
Hmmm, you are right... In such case i recommend you to install custom ROM MegaFireMJ2V6 made by megalomanic14 on basis stock MJ2 which you can find HERE.
Actually I am using this ROM and can say it is very good - looks like stock but is much faster. It's rooted already. Version X offer firmware stripped from unneeded apps to the extent.
trurl3 said:
Hmmm, you are right... In such case i recommend you to install custom ROM MegaFireMJ2V6 made by megalomanic14 on basis stock MJ2 which you can find HERE.
Actually I am using this ROM and can say it is very good - looks like stock but is much faster. It's rooted already. Version X offer firmware stripped from unneeded apps to the extent.
Click to expand...
Click to collapse
Thank you very much. Most of that sentences was Greek to me, but I get the idea! The truth is, I put my foot into the water of flashing custom ROMS, and decided it wasn't for me. I just want one, reliable ROM that I can live with for many months without having to change it. That's why I decided to go back to Samsung, because there were too many bugs in Cyanogenmod and I don't want to start testing one ROM after the next. I just want to install a reliable, bug-free ROM now, and have done with it. So you think that MegaFireMJ2V6 would be such a ROM in my case?
PS:
It seems MegaFireMJ2V6 can't be downloaded from that link anyway?
Type your phone model in the link below and choose the one you want. Create a free account if you need faster download speeds.
http://www.sammobile.com/firmwares/
Silesh.Nair said:
Type your phone model in the link below and choose the one you want. Create a free account if you need faster download speeds.
http://www.sammobile.com/firmwares/
Click to expand...
Click to collapse
Thank you, but I've tried this several times, and the only download available is the most recent.
You are wrong. It shows all the firmwares released for a model. I can see all the releases for GT-I9200. Attached is a screenshot of the older firmware without knox....
As far as I understand it, these are all the same ROM, simply different versions for different countries. When I put in my phone, GT-i9250, I am presented with a similar page, but it's only the one ROM; 4.2.2 with KNOX.
Ok man, I am done trying to explain things to you. The list you showed only displays Knox firmware, but what you said is not true. Here is another site with older firmware displayed for the I9205. There is no I9250 model Mega afaik..
Silesh.Nair said:
Ok man, I am done trying to explain things to you. The list you showed only displays Knox firmware, but what you said is not true. Here is another site with older firmware displayed for the I9205. There is no I9250 model Mega afaik..
Click to expand...
Click to collapse
I apologise if I have offended you in any way, that certainly wasn't my intention. I'm simply new to all of this and don't understand it well. I appreciate the new link, and thank you for your help.