I've got problem when im using nightelf kernel in my JJhybrid v3.2 unlock bootloader...
I have installed about 60 application but my internal storage available still 300mb, after that i cant update any application and install application from apk. its says 'package install is invalid'. is this because the kernel?
Do i need a ext2 partition for this kernel??
Can anyone help me??:crying:
Try reflashing kernel. Dont know if its related to it or not. But if it is it can only be solved by reflashing it.
Related
I flashed Doomlord kernel for locked bootloader by xrecovery but have an error: "failure at line 1: copy_dir package: system system: installation aborted" How can i fix it? Help me. Many thanks.
Try rebooting anyway, Doom said it should work.
I tried many time but it's the same. last time, i flash TW v6c (custom rom) it doesnt work to, i think the same error. How should i do to fix it now?
check in xrec there's and option Partition tools in that check whether the first option is Mount System.. if its the try changing and flashing it !! else if its the other way i.e unmount system then jus change it and flash!!
hope it works !!
Hic, it still doesnt work, but i see that after i flash (it still error), the Mount system change to Unmount System. Help me plz.
whats not working exactly.. like now u can flash the package or not ??
I get the same error: "failure at line 1: copy_dir package: system system: installation aborted" when i do what u said. I reboot, it only stop at bootanimation. Then, i tried to flash ewJet kernel it "failure at line 6" but i still start normal with wifi error .
Help me, plz!!!
Do one thing then flash the rooted firmware for x10i I mean the generic one ...then freshly install ericks Rom and flash kernel ..might help u
Sent from my X10i using XDA App
OMG, i installed ewjet rom, but it stop at bootanimation and reboot. I tried 2-3 times, but it's the same.
afte installing EWjet how much time did u wait until it restarted ???
i wait until it reboot again, 2-3times, then i must leave it to flash other rom. only custom rom have custom kernel i have that error (i think so) because i flashed Dix, aniking, th2 v7, TEAM
no not necessarily that custom Rom have custom kernels!! u can try others too!
and which kernel of Doomlord ru using "Unlocked or Locked " Bootloader ??
My phone's locked Bootloader so i use DoomKernel for locked bootloader v.4b.
did u install the kernel before goin for the ROM ??
I have installed wolf xperia ulbldoom rom on my x10. The kernel was doomkernel medium overclock. I was having problems with wifi disconnecting evey now and then so I installed the wifi modules using xrecovery. Now the wifi wont turn on and says error. After that i have tried installing the wifi modules using CWM recovery, tried installing the kernel again, tried installing the full overclock kernel but still getting wifi error. Please help!!!!
Make sure you have unlocked your bootloader, maybe a clean install can fix that.
r_raghupati said:
I have installed wolf xperia ulbldoom rom on my x10. The kernel was doomkernel medium overclock. I was having problems with wifi disconnecting evey now and then so I installed the wifi modules using xrecovery. Now the wifi wont turn on and says error. After that i have tried installing the wifi modules using CWM recovery, tried installing the kernel again, tried installing the full overclock kernel but still getting wifi error. Please help!!!!
Click to expand...
Click to collapse
Had the same problem make sure you have the correct wifi modules. if so try download again maybe a corrupted download (so it was for me)
Do a full wipe (factory reset) and clean the dalvic cache the reinstall the ulbldoom rom
You should also check if the bootloader is unlocked as written above by linkermix
Ther is a tool in the development thread for checking
hit thank button if i helped. feel free to pm for further questions
Greetz Darkmind
solved
thanks guys... so i installed the wolf mod again and since the last thing i did was flash the doomlord full overclock kernel, my phone is running faster than it has ever been. I could not be happier
i have problem too, can u tell me way of fix
hello this is my first aid, suffer some devices fail.
corruptea SD card, and you can not flash a rom.
eg
you use a CM9 rom ics (achojan) normal
after flashing the kernel CM10 (scricht007)
You can no longer re-flash the CM9 rom ever.
I tried to give him a hard reset xperia x10, unlock the bootloader, I downgraded the firmware to gb, micro sd've changed, and nothing has given me solution, I could not install a CM9 rom. all is not lost.
solution:
lock the boot loader
use seus, update firmware, to gb.
open, FlashTool. 2.1 flash rom piece, the phone normally.
turn off the phone, and open seus updates the firmware to gingerbread
root to mobile
unlock the bootloader
flash the custom kernel, and enjoyment.
achojan rom flash kernel v6 feravolt
sorry for my bad English (google translate)
Hi at all, i'm italian (sorry for my english) and i've a very big problem.
I've xperia mini. I installed CM 9.1 and mesa hybrid kernel 4.4. I was wrong to enter the unlock pattern screen, and after the verification code google (never finished) the phone went into bootloop. In an attempt to fix the situation I did a wipe of the system and now I have no OS installed and when I turn off the system from recovery (that works) written out "E: Unable to locate page (install." I tried to flash the CM from sd but it gave me error Session 7, then following the advice here on xda I worked around the problem but the rom does not install the same, always says Failed and remains on Updating Partition ...
What can I do? You can send in the warranty?
Thank you in advance if you can help me. Hello.
:crying:
steakhutzeee said:
Hi at all, i'm italian (sorry for my english) and i've a very big problem.
I've xperia mini. I installed CM 9.1 and mesa hybrid kernel 4.4. I was wrong to enter the unlock pattern screen, and after the verification code google (never finished) the phone went into bootloop. In an attempt to fix the situation I did a wipe of the system and now I have no OS installed and when I turn off the system from recovery (that works) written out "E: Unable to locate page (install." I tried to flash the CM from sd but it gave me error Session 7, then following the advice here on xda I worked around the problem but the rom does not install the same, always says Failed and remains on Updating Partition ...
What can I do? You can send in the warranty?
Thank you in advance if you can help me. Hello.
:crying:
Click to expand...
Click to collapse
Ok, i flashed stock last ics with flashtool and it works! I obtained root access with e-root one click, and installed recovery with xparts but CM give me always the same error... why?!
Hmmm....first of all, wipe system will always make your phone in bootloop...your should factory reset not wipe system...
second, since you already use custom kernel before this, then why do you need to go so much trouble install CWM using xparts? jst flash custom kernel and you will have per-rooted phone and built-in CWM recovery....
iPusak Gaoq™ said:
Hmmm....first of all, wipe system will always make your phone in bootloop...your should factory reset not wipe system...
second, since you already use custom kernel before this, then why do you need to go so much trouble install CWM using xparts? jst flash custom kernel and you will have per-rooted phone and built-in CWM recovery....
Click to expand...
Click to collapse
Yeah, you're right but i don't know if this kernel works with stock. Kernel is [KERNEL][ALL '11 MDPI] MESA Hybrid v4.4 for CM9/CM10/CM10.1 [11 APR 2013].
How can i solve my problem?
steakhutzeee said:
Yeah, you're right but i don't know if this kernel works with stock. Kernel is [KERNEL][ALL '11 MDPI] MESA Hybrid v4.4 for CM9/CM10/CM10.1 [11 APR 2013].
How can i solve my problem?
Click to expand...
Click to collapse
used Mesa Hybrid v4.5 from that thread....it for stock rom only....do not use other than that cause Mesa Hybrid v4.4 and below are for CM9/10/10.1 Roms....
No OS installed, flash failed - Help Please
iPusak Gaoq™ said:
used Mesa Hybrid v4.5 from that thread....it for stock rom only....do not use other than that cause Mesa Hybrid v4.4 and below are for CM9/10/10.1 Roms....
Click to expand...
Click to collapse
i extracted the kernel by the cyano's zip, and i've flashed it in fastboot. Then i flashed cyano by recovery, and then i flashed in fastboot the mesa hybrid 4.4. All right! :laugh:
Ok, I am going to list my problem/query along with information i have gathered over the best part of 3 hours.
So, I have been doing some research regarding CWM recovery to be installed on my x10. I have already rooted and BLU my x10 and every thread I have read says that CWM is the most simplest way to put customised ROMs onto my phone. RecoverX, both PC and APK version, has been suggested several times accross XDA and other forums as the program to use to instal CWM. This is not the case as it only offers xRecovery, which although says it is installed succesfully, doesnt work. I also read that Rom Manager APK by clockworkmod would do it but it says that x10 is unsupported. But it does ask if it have installed a clockwork based mod manually.
Does anyone here at XDA know how I can get it installed?
I am currently running android 2.3.3 and was trying to get it upgraded to the MIUI ICS for X10 as seen in this thread; http://forum.xda-developers.com/showthread.php?t=1774623
Cheers, any help or advice would be appreciated.
Just install FeraKernel v18.4 or DoomKernel v6, both of which have CWM built in.
FeraKernel has a later date CWM version.
If you install an old version of Flashtool cira 0.8.6, it came with CWM Recovery and xRecovery which could be installed from Flashtool menus.
Before you flash FeraKernel or DoomKernel, have the ROM zip you wish to install with CWM on the X10 while it's running GB 2.3.3
This way when FeraKernel or DoomKernel are flashed to get access to CWM, you don't have to worry about WiFi and Graphics drivers as you already have your ROM on the phone and ready to go and just need to tap the volume up button to access CWM as the Kernel boots for the first time.
Enjoy.
Dr Goodvibes said:
Just install FeraKernel v18.4 or DoomKernel v6, both of which have CWM built in.
FeraKernel has a later date CWM version.
If you install an old version of Flashtool cira 0.8.6, it came with CWM Recovery and xRecovery which could be installed from Flashtool menus.
Before you flash FeraKernel or DoomKernel, have the ROM zip you wish to install with CWM on the X10 while it's running GB 2.3.3
This way when FeraKernel or DoomKernel are flashed to get access to CWM, you don't have to worry about WiFi and Graphics drivers as you already have your ROM on the phone and ready to go and just need to tap the volume up button to access CWM as the Kernel boots for the first time.
Enjoy.
Click to expand...
Click to collapse
Well I can't seem to find the old version of flashtool 0.8.6.0 nor doomkernel v6. The doom kernels keep referring me to broken links or hotfile which has been taken down. The ferakernel 18.4 seem to crash while being flash thus aborting the whole process. Was wandering if you have the older doomkernel or flashtool lying around or anyone who does who could do a fresh upload link please?
Thanks
Solved!
Finally got this sorted. After about 4 ours of trailing through the net. I found a 0.8.0.0 version of flashtool and an update to 0.8.6.0. If anyone is need of these files to get CWM recovery for X10 do let me know. Happy Chappy now. Thank you Dr Goodvibes.
You're welcome.